SO CHEEKY !

EU07250A Raw materials from SEPPIC

ALOHA ROSE CHEEK STAIN
LANOL™ 99
Isononyl Isononanoate
Formula Emollient agent.
A Isodecyl Neopentanoate 27.00%
LANOL™ 99 25.80% FLUIDANOV™ 20X
Octyldodecanol and Octyldodecyl Xyloside
FLUIDANOV™ 20X 5.00% “EASEMOLLIENT” from original xylolipidic emulsifier, extra-fluid, easy-
Glyceryl Behenate 5.00% to-use, FLUIDANOV™20X is a smart emollient: texturing effect in
Glyceryl stearate 10.00 cream gels, it will also contribute to stabilize W/O emulsions and
Aloha rose blush, smooth on surface, improve skin feeling.
B C.I. 15880 / octyldodecanol 1.00%
whipped below C.I. 77891 / octyldodecanol and stearic 6.00% SEPIMAT™ HB V
Packaging: jar acid and magnesium hydroxide and Methyl Methacrylate Crosspolymer
Ultra-soft hollow and ultra light microspheres that impart a “powdery”
aluminium hydroxide and sorbitan oleate effect at low use levels. This versatile, both hydro and lipo
This blush delivers a healthy easy glow. A dispersible, powder allows formulators to make very powdery
C SEPIMAT™ HBV 10.00%
confidence boost before going out. " So Mica 4.00%
formulations containing low levels of oily materials. In O/W, W/O or
W/Si emulsions, only 0.5% of Sepimat ™HBV is enough to avoid overly
cheeky "! Kaolin 5.00% greasy formulations and provide a powdery feel.
A formula with a melting texture that easily
applied even with the fingers ! It glides D Phenoxyethanol and Ethylhexylglycerin 1.00%
perfectly onto the skin, without without E Parfum / Fragrance 0.20%
leaving a thick layer or lines.
SEPIMAT ™ HBV mattifies cheekbones and
brings an ultra soft and powdery touch.
FLUIDANOV ™ 20X helps to disperse
pigments and also brings emollience, Procedure
stability. Lab test
Melt the phase A at 85°C. When it is melted, add phase B and maintain
the temperature at 85°C 15 for minutes. Then, add phase C and
maintain the temperature at 85°C for another 15 minutes. Cool down
under anchor until 60°C. Then homogenize for 6 minutes in 4000 rpm
with Silverson to refine the preparation . Add phase D during these 6
minutes. Mix under anchor at RT until approximately 40°C (add
perfume at approximatly 45°C). Fill the product at 40°C.
Other raw materials…
• Isodecyl Neopentanoate: DUB VC110 (STEARINERIES DUBOIS)
Characteristics • Glyceryl Behenate: Compritol 888CG (GATTEFOSSE)
• Glyceryl stearate: Geleol (GATTEFOSSE)
Appearance Wax aloha rose smooth on surface, • C.I. 15880/ octyldodecanol: Covanol Rubine OS4714 ( SENSIENT
whipped below LCW)
Stability* 1M • C.I.77891 / octyldodecanol and stearic acid and magnesium
hydroxide and aluminium hydroxide and sorbitan oleate:
Covanol White ON9787 ( SENSIENT LCW)
• Mica: Mica 1000 (SCIAMA)
• Phenoxyethanol and Ethylhexylglycerin: EUXYL PE9010 (SCULKE &
MAYR)
EU07250A - 1403 • Parfum / Fragrance: Parfum Figue Gourmande (TECHNOCO FLOR)
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any
compositions or methods covered by a patent or a patent application. All information contained in this specific technical documentation is believed to be accurate and has
been set up by SEPPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its products for the
preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must insure that the duplication of the
hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status. www.seppic.com
* Our stability protocols are available at your request.