128, av.

du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex

Tel : 0 (+33) 5 55 06 87 87 Fax : 0 (+33) 5 55 06 88 88
www.legrand.com

DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to 56,
6 380 71/72/73

1. USE 2. RANGE

 2.1 DLP-S Trunking

DLP-S trunking offers:
2.1.1 Snap-on DLP-S trunking
- the distribution, the protection and the derivation of the various
cables in an electrical installation.
- trunkings, finishing accessories (end, joint of lid, joint of body, interior
angle, exterior angle, flat angle, derivation) Cover
Sections
- all the easy ways/advantages for the installation. Compartments nr width Numbers
(mm)
- comply with the standard EN 50085-2-1, safety and technical perfor- (mm)
mance.
- a flexibility with the installation and maintenance:
85 x 50 6 380 20
5 references of trunkings delivered with a cover of 45/75mm:
1
Note that we have 2 types of trunking:
45 100 x 50 6 380 30
Trunking with cover 45mm is a “Snap-on trunking”
Trunking with cover 75mm is a “Universal trunking”

This new trunking will allow the universal direct clips of all the mecha- 2
nisms 45x45 of the market 130 x 50 6 380 40

Perforation of the body of the trunking.

Fixing by:
2.1.2 Universal DLP-S trunking
- wall plugs for immediate fixing (without screw nor nail ref. 30899)
- DLP rapid wall plug ref 0 308 97 (for 10mm maxi plasterboard walls at
least 20mm away from the concrete surface)
- screw, nails… Cover
Sections
Compartments nr width Numbers
(mm)
Cut out using a saw (standard hacksaw) (mm)

Possibility of adapting separation partition.

1 100 x 50 6 380 38

75

2 190 x 50 6 380 50

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

1/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

Dimensions of holes in funds of the bodies

 2.2 Finishing accessories for snap-on & universal DLP-S trunking

To install accessories below with universal trunking 100x50

ref 6 380 38, please use the adaptor delivered with accessories

Example with internal angle:

To use with an 100x50 ref 6 380 38, please use the adaptor (delivered
with internal angle) for mounting the angle

Funds of the bodies provided with holes for fixing, facilitating the
upgrade of the trunking (balance/slope)

Attention with use of conductors inside the sections

Example with External angle:

To use with an 100x50 ref 6 380 38, please use the adaptor (delivered
with External angle) for mounting the angle:

Inside the trunkings, connection of the conductors using “domino” to

respect the IP 20 mini.

2.1.3 PVC partition nr 6 380 08

Delivered in length of 2m
Grey Color.

For the separation of various types of currents allows (sector, telephone,

data processing…)
Assembly with the body by clip-on (only on trunking 85x50 -100x50 and
190x50)

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

2/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

2.2.1 Variable or not internal angle 2.2.2 Variable or not external angle

Enables the junction in interior angle of two pieces of the same section: Enables the junction in exterior angle of two pieces of the same section:
- respects the degree protection - respects the degree protection
- improves aesthetics (covering of the cut) - improves aesthetics (covering of the cut)
Variable internal angles from 80 to 120°. Variable internal angles from 80 to 120°.
Not variable: 90° Not variable: 90°
White color. White color.
Clip-on on the body. Clip-on on the body.

Note: For DLP 100x50 Universal trunking nr 6 380 38, use the Note: For DLP 100x50 Universal trunking nr 6 380 38, use the
special adaptor (please look at page 2) special adaptor (please look at page 2)

Trunking positioning:

Trunking positioning:

variable angle not variable angle variable angle not variable angle
Snap-on Trunkings
Snap-on Trunkings
variable not variable
variable not variable
6 380 21 85x50 6 380 27 85x50
6 380 22 85x50 6 380 28 85x50
6 380 31 100x50 6 380 17 100x50
6 380 32 100x50 6 380 18 100x50
6 380 41 130x50 6 380 47 130x50
6 380 42 130x50 6 380 48 130x50

Universal Trunkings
Universal Trunkings
variable not variable
variable not variable
6 380 31 100x50 6 380 11 100x50
6 380 32 100x50 6 380 12 100x50
6 380 51 190x50 - -
6 380 52 190x50 --

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

3/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

2.2.3 Not variable flat angle 2.2.4 Flat junction

Enables the junction in flat angle of two same sections : Enables the junction in “T” :
- respects of the degree protection - respects of the degree protection
- preserves the distribution of the various currents - improves aesthetics (covering of the cut)
- improves aesthetics (covering of the cut) White color
White color. Clip-on on the body.
Clip-on on the body.

Not variable angle: 90° Note: For DLP 100x50 Universal trunking nr 6 380 38, use the
The flat angles are delivered with 2 elements. special adaptor (please look at page 2)

for trunkings for trunkings

Sections Sections
snap-on universal snap-on universal
85x50 6 380 23/29 - 85x50 6 380 24 -
100x50 6 380 19/33 6 380 13 100x50 6 380 34
130x50 6 380 49 6 380 43 130x50 6 380 44 -
190x50 - 6 380 53 190x50 - 6 380 54

« T junction» with adhesive for trunking 130 and 190

To fix on trunking with

adhesive delivered inside
the junction

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

4/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

2.2.5 End cap 2.2.6 Cover joint

Clip-on cover

Enables:
- the junction end to end of two covers
- the respect of the degree protection
- to improve aesthetics (covering of the cut)

White color.
Enables to block the end of the body:
Numbers for cover width
- respect of the degree protection
- improvement of aesthetics (covering of the cut) 6 380 00 45 mm
- left or right end cap 6 380 01 75 mm
White color
Clip-on on the body by fitment and screwing.

2.2.7 Body joint

To fix inside the

trunking with a
screw (not
included)

Enables:
- the junction end to end of two covers
- the respect of the degree protection
- to improve aesthetics (covering of the cut)
for trunkings To fix on the body with two stickers.
Sections
snap-on universal
White color.
85x50 6 380 25 -
100x50 6 380 35
130x50 6 380 45 -
to fix on trunking with these two
190x50 - 6 380 55 stickers

for trunkings
Sections
snap-on universal
85x50 6 380 26 -
100x50 6 380 36
130x50 6 380 46 -
190x50 - 6 380 56

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

5/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

 2.3 Mounting wiring devices accessories

2.3.1 for snap-on DLP-S trunking 2.3.2 for universal DLP-S trunking
2.3.1.1 Normaclip nr 6 038 57 2.3.2.1 45 mm wiring devices supports

Accessory for fixing wiring devices inside the snap-on trunking. Frames delivered with finishing plate in white colour.
Enables :
- anti-slip
- anti-pullout Enables the assembly of 2/ 4/ 6 modules 45x45 mm sockets
- perfect finish on trunking equipped with 75 mm cover
- respect of the degree protection (IP40)
White color
Pack by 10 sets of 2 peaces Numbers Modules number

Concerning the number max of Mosaic modules can be use between 2

Normaclip, 6 380 71 2
please respect the installation below (as 1 pair for 8 modules max, 2 pairs
for 16 modules etc...)
L≤ 2 x 45mm
6 380 72 4

L 6 380 73 6

X1 1 ---> 2

L> 3 x45mm

mm
58

78 mm
frame
L
73 mm

X2 3 ---> 4
X3 5 ---> 6 plate

X4 7 ---> 8
mm
65

Support 2 modules 4 modules 8 modules

color
composed of 6 380 71 6 380 72 6 380 73
Frame (mm) grey 58x73 123x73 168x73
Plate (mm) white 65x78 130x78 175x78

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

6/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

2. RANGE (cont.) 2. RANGE (cont.)

2.3.2.2 British standard support nr 6 380 05 2.3.2.3 1P 60 mm centres Bax box nr 6 117 89

Set of 2 parts (delivered with insert and screws)

White colour
Enables the assembly on trunking DLP-S Universal (75 mm cover) of
Synergy, Mallia, Belanko wiring devices.

Enables insulation wiring devices by clipping itself behind the 60 mm

frame nr 6 117 88.
Grey color

2.3.2.3 1P 60 mm centers universal frame nr 6 117 88

Snap-together and joinable frame

Grey color

Enable the assembly on trunking DLP-S Universal (75 mm cover)

of 60 mm wiring devices (Niloé, Kaptika...)

75

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

7/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

3. TECHNICAL CHARACTERISTICS

Wiring capacity of DLP-S trunking

Snap-on trunking Section mm² Capacity Maxi diameter 3x1,5 mm² 3x2,5 mm² UTP & FTP CAT.6
2940 Max 26 19 58
85x50
2092 with 2PT+E sockets 36 18 13 41
nr 6 380 20
2618 with RJ socket 23 17 52
3400 Max 36 27 82
100x50
2738 with 2PT+E sockets 36 24 17 54
nr 6 380 30
3264 with RJ socket 29 21 65
2646 Max 23 17 52
1256 with 2PT+E sockets 36 11 8 25
130x50
nr 6 380 40 1762 with RJ socket 15 11 35
2 compartments 2616 Max 23 17 52
1206 with 2PT+E sockets 36 10 7 24
1732 with RJ socket 15 11 34

Universal trunking Section mm² Capacity Max diameter 3x1,5 mm² 3x2,5 mm² UTP & FTP CAT.6
4224 Max 36 27 82
100x50
nr 6 380 38 2738 with 2PT+E sockets 36 24 17 54
3264 with RJ socket 29 21 65
4017 Max 45 29 164
- with 2PT+E sockets 36

190x50 - with RJ socket

nr 6 380 50 4017 Max 45 29 164
2 compartments
- with 2PT+E sockets 36 - - -
- with RJ socket - - -

Classification of DLP-S trunking EN 50085-2-1*

6.2 Resistance to impact for installation and application 2.0J

6.3 Minimum storage and transport temperature - 25°C
6.3 Minimum installation and application temperature - 5°C
6.3 Maximum application temperature + 60°C
6.4 Resistance to flame propagation Non-flame propagating
6.5 Electrical continuity characteristic Without electrical continuity characteristic
6.6 Electrical insulating characteristic With electrical insulating characteristic
6.7 Degrees of protection provided by enclosure IP40
6.9 The system access cover retention With a tool
6.101 The position when surface mounted Wall fixed
Celling fixed
6.103 The functions provided Type 1
Rated voltage 500 V
Protection against mechanical shocks IK 07
Protection contre les chocs mécaniques IK 07

* complete information about system on demand

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

8/9
DLP-S Trunking Number(s) : 6 038 57, 6 117 88/89, 6 380 00/01/05, 6 380
08, 6 380 11 to 13, 6 380 17 to 36, 6 380 38, 6 380 40 to
56, 6 380 71/72/73

3. TECHNICAL CHARACTERISTICS

Compositions and functions of DLP-S trunking (1 system per line) EN 50085-2-1 :

Trunking
End cap
Body Numbers Section (mm²)
85x50 6 380 20 2940 6 380 25
100x50 snap-on 6 380 30 3400 6 380 35
100x50 Universal 6 380 38 4224 6 380 35
130x50 (2compart) 6 380 40 2646/2616 6 380 45
190x50 (2compart) 6 380 50 4017/4017 6 380 55

4. MATERIAL CHARACTERISTICS

Trunking/cover/partition => RAL 9003 white PVC, conform to the Directive RoHS*1
Accessories => RAL 9003 white ABS conform to the Directive RoHS*

*1 RoHS designation :
Restriction of the use of certain Hazardous Susbtances, RoHS in the Equipements Electriques and Electroniques (EEE)

Technical data sheet: F01198EN/07 Updated: 09/02/2024 Created: 19/01/2012

9/9