CD150M

CD150M Dri-Prime Pumps ®

The Godwin Dri-Prime 6" (150mm) CD150M automatic priming centrifugal pump is clearly the
backbone of the temporary portable pumping industry. With solids-handling to 3" (75mm) in
diameter, maximum flows of 1700 gallons per minute (107.3 l/sec.) and 160 feet (48.8M) of total
dynamic head, and indefinite dry-running capabilities, the CD150M can be found in a wide variety
of applications from straight dewatering to sewage bypassing. Mounted on a highway trailer, the
CD150M is the most maneuverable and versatile portable pumping system available, making it a
favorite of contractors, municipalities, industry and environmental companies across the country.

Features
• Close coupled centrifugal pump • Solids handling ball type Non
with vacuum priming compressor Return Valve with renewable
mounted to a diesel engine. Also flexible rubber seat and quick
available in electric drive or as bare release access feature.
shaft pumpend.
• Compact unit mounted on skid
• All cast iron construction with cast base or two wheeled highway
chromium steel impeller. trailer both incorporating integral
overnight running fuel tank.
• Extensive application flexibility —
• Simple maintenance — normally
will handle raw sewage, slurries and
limited to checking engine and
liquids with solids up to 3" (75mm) in
seal cavity oil levels.
diameter.
• Standard John Deere 4045D or
• Continuously operated “Godwin” air Caterpillar 3054NA engine. Also
ejector priming device requiring no available with a variety of other
periodic adjustment or control. engines including Hatz, Perkins
and Deutz.
• Dry running, oil bath, mechanical
seal with abrasion resistant solid • Super-quiet critical silence pack
silicon carbide interfaces. version available for use in
residential communities.
 CD150M Performance Curve Specifications
m ft. Maximum Operating Speed:
55 180
2200 rpm
170 2200 RPM
50
30%
40%
Maximum Operating Temperature:
160
+212° F (100° C)
150 50%
45
60%
Maximum Working Pressure:
140 2000 RPM
64% 58.5 psi (4.0 BAR)
40 130
Maximum Suction Pressure:
35
120
1800 RPM 40.0 psi (2.8 BAR)
110
64% Maximum Casing Test Pressure:
100
30
60%
88.0 psi (6.1 BAR)
1600 RPM
90
Fuel Tank Capacity:
HEAD

25
80
50%
30 to 100 gallons (60 gallon standard)
1400 RPM
20
70
113.5 to 378.5 liters (227 liters standard)
60
1200 RPM
40% Fuel Consumption (full load):
15 50
JD 4045D: 3.82 gph (14.46 lph) @ 2200 rpm
10
40
CAT 3054NA: 4.3 gph (16.28 lph) @ 2200 rpm
30
Pipe Connections:
5
20
6" (150mm) ASA 150#
10
Solids Handling:
0 0
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 US GPM 3" (75mm) dia., standard impeller
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 L/SEC

FLOW
Materials
Pump Casing, Suction Cover,
Performance Table Separation Tank and Wearplates:
Close grained cast iron
Diesel Set: John Deere 4045D, 71 hp @ 2200 rpm Impeller:
Caterpillar 3054NA, 74 hp @ 2200 rpm Cast chromium steel hardened to minimum
Impeller Diameter — 11.02" (280mm) Brinell 341 HB
Shaft:
Total Delivery Head — Feet 1-1/2% nickel/chromium steel
Non Return Valve Body, Ejector Housing:
Total Suction 10 20 30 40 50 Close-grained cast iron
Head — Feet Output — GPM Non Return Valve – Ball and Seat:
High nitrile rubber
10 1800 1780 1750 1700 1680 Mechanical Seal Faces:
15 1700 1650 1600 1520 1400 Solid silicon carbide

20 1670 1590 1500 1380 1240

Performance data listed in table and curves are based on water tests
at sea level and 68° F (20° C). Larger diameter pipes may be required
for maximum flows.

Dimensions
CD150M — shown with John Deere 4045D, GP60 Highway Trailer One Floodgate Road, Bridgeport, NJ 08014, USA
Weight: 3200 lbs. (1,451.5 kg.) (856) 467-3636 • Fax: (856) 467-4841
Quenington, Cirencester, Glos., GL7 5BX, UK
+44 (0)1285 750271 • Fax: +44 (0)1285 750352
E-mail: [email protected]
C
L www.godwinpumps.com
74-3/4"
1,899mm
BRANCH LOCATIONS:
59"
1,499mm C
L Connecticut • Pennsylvania • New York • Ohio
Illinois • Maryland • Virginia • West Virginia
40-1/2"
1,029mm Georgia • South Carolina • North Carolina
Florida • Texas • Montana • California • Washington
Dri-Prime® and the color orange for pumps are registered trademarks of
Godwin Pumps of America, Inc.
65-7/8" 117-7/16" Specifications and illustrations are subject to revision without notice.
1,673mm 2,983mm © Copyright 2002-2005 Godwin Pumps of America, Inc.

GPASL.016.505