GENERAL CATALOGUE 16/2

AUTOMATION and CONTROL SYSTEMS LOW VOLTAGE POWER

DISTRIBUTION
SYSTEMS
 HISTORY
2013 2014 2015 2016

PSBB, full automatic

metal production line, was
established and as the
Form 3 and Form 4 type company applying such Withdrawable
Energy Distribution MCC Technology Neo Series Modular
technology in the sector,
Cabinets were developed Teos Draw Series Standing Type
a big leap was experienced
and secure solutions production technology and launched into Enclosure launched
launched for customers capacity . market. to market.

2012 2010 2009 2008

With introduction
of new buildings in
By establishing nano-
Teos Series Modular İzmir Kemalpaşa, Istanbul branch was
technological coating
Standing Type Cabinet line, environment- total production opened for service and
where it reshaped the friendly and advanced area was increased local proximity and
standards was launched technology surface up to 20.000 logistic supports level
to market. process was adopted square meters. was improved.

2002 2003 2004 2007

In order to direct the Conveyor painting system The company,

rapid development, with full automatic expanded and
spray line cleaning and
the company moved developed rapidly As a result of the
iron phosphate coating
to the factory located was adopted and the in domestic positive demand
to an area of 10.000 parts started to be market, carried increase in export,
square meters in produced without human out its first first overseas export
Izmir Kemalpaşa. intervention at high quality. export. was realised.

1999 1998 1995 1994

In metal production
process, computer
Production of based CNC controlled With electro-static The company moved
modular standard automatic production powder coating to the factory in İzmir
panels started technology was application, the surface Pınarbaşı as a result of
and products were adopted instead of NC process was carried up increase market share
launched in market technology. to World standards. and production volume.

1976 1980 1984 1988

The company was The company expanded

in time thanks to its In production, instead of
established in 1976 For the first time in
quality products and machines controlled and
by Davut Yanık increasing customer local application used manually, semi-
and Ahmet Yanık rate, moved to the owen method has automatic machines with
in a small atelier in bigger size atelier in been applied in wet NC technology started to
İzmir. İzmir Çamdibi coating process. be used.
MISSION VISION
To Become One Of The Two
We Are Aware Of Our Products Are Used In Hard Conditions.
Companies In Our Active
Our Duty As Tekpan Family; Defuse Those Hard Conditions
Geographies That Comes To Mind
Away With Our Suppliers And Business Associates
For Any Requirements Related To
Our Products.

5XVVLD

8QLWHG %HODUXV
'HQPDUN
,UHODQG .LQJGRP 3RODQG
1HWKHUODQGV *HUPDQ\
&]HFK5HSXEOLF 8NUDLQH
%HOJLXP $XVWULD
&URDWLD .D]DNKVWDQ
)UDQVD 6ZLVV 6HUELD 0ROGRYD
6SDLQ )\URP
,WDO\ %XOJDULD
3RUWXJDO 7XUNH\
*UHHFH
7XQLVLD 6\ULD ,UDT ,UDQ
0RURFFR ŠVUDLO /HEDQRQ
-RUGDQ
$OJHULD %DKUDLQ
(J\SW
6DXGL 4XDWDU
'XEDL
$UDELD 8QLWHG$UDE(PLUDWHV
2PDQ

%XUNLQD)DVR

1LFDUDJXD *KDQD 1LJHULD (WKLRSLD

3DQDPD 6LQJDSRUH
.HQ\D

6RXWK$IULFD
$XVWUDOLD

&KLOH
8UXJXD\
OUR PRINCIPLES OUR PRINCIPLES
WCM HUMAN ORIENTED UNDERSTANDING
Become a model as manufacturer
in World-wide.

Become a family, sensitive

for occupational safety DISCIPLINED HUMAN,
and environment DISCIPLINED PROCESS
PRODUCTION PRODUCTION
Raw Material Punching
and Bending Process
PRODUCTION PRODUCTION
Powder Paint
Process
Raw Material
Punching Process

Sealing Gasket
Process
Raw Material
Bending Process
Assembly
Process

Welding
Process

Packaging
Process
QUALITY CERTIFICATES QUALITY CERTIFICATES

SYSMIC TEST
REPORT 744h
 CONTENTS CONTENTS

COMPACT WALL MOUNTED ENCLOSURES.......... 16-35 OUTDOOR CABINETS........................................... 132-137

ISOLATORS and BUSBARS.................................. 138-159

FLOORSTANDING CABINETS................................ 36-113

ENCLOSURE AIR-CONDITIONING…................... 160-173

CONTROL CONSOLES.......................................... 114-121

GENERAL ACCESORIES....................................... 174-187

STAINLESS STEEL ENCLOSURES....................... 122-131

TECHNICAL DRAWINGS....................................... 188-213

TECHNICAL SPECIFICATIONS............................. 214-218

 COMPACT ENCLOSURES COMPACT ENCLOSURES

KT TERMINAL BOXES page 18-19

DM WALL MOUNTED ENCLOSURES page 20-21

ARES WALL MOUNTED ENCLOSURES page 22-35

16 17

IP66 IP65
 COMPACT ENCLOSURES COMPACT ENCLOSURES
KT SERIES KT SERIES

KT TERMINAL BOXES

KT TERMINAL BOXES
ENCLOSURE SIZE (mm)
D WIDTH (W) HEIGHT(H) DEPTH(D) REFERENCE NO.
W
200 200 120 312.212
300 200 120 313.212
300 300 120 313.312
400 200 120 314.212

H
400 300 120 314.312
400 400 120 314.412
500 200 120 315.212
500 300 120 315.312
600 200 120 316.212
600 300 120 316.312
600 400 120 316.412

Material : Body, door: 1, 20 mm mild steel + RAL 7035 coating The body structure is completely welded, water- and
dust-resistant, and designed with a sealing foam gasket. KT MOUNTING PLATE
IP Protection : IP 66
Stainless steel 304 (1.4301) Please see page 126 for quality KT ENCLOSURE SIZE (mm) MOUNTING PLATE
Supply Includes : 1 pcs body,1 pcs screwed lid, 4 pcs wall brackets executions. WIDTH(W) HEIGHT(H) REFERENCE NO
and assembly parts
200 200 942.122
Please see page 188 for technical drawings. 300 200 942.132
300 300 942.133
400 200 942.142
400 300 942.143
400 400 942.144
500 200 942.152
500 300 942.153
600 200 942.162
600 300 942.163
600 400 942.164

Material : 2.00 mm galvanized steel

Supply Includes : 1 pcs mounting plate and assembly parts.

Mounting Plate Application Wall Bracket

For selection sheet see page 19 Included in the product as standard

18 19

IP65
 COMPACT ENCLOSURES COMPACT ENCLOSURES
DM SERIES DM SERIES

DM WALL MOUNTED ENCLOSURES W1 DM WALL MOUNTED ENCLOSURES

H1
Mounting
DM ENCLOSURE SIZES (mm)
Plate (mm)
WIDTH (W) HEIGHT (H) DEPTH (D) REF. NO. VERSION Lock Qty. W1 H1
Mounting Plate 250 300 155 222.315 1 1 200 240
300 300 210 223.321 1 1 250 240
W
D
300 400 155 223.415 1 1 250 340
300 400 210 223.421 1 1 250 340
400 400 210 224.421 1 1 350 340

H
400 500 210 224.521 1 2 350 440
400 600 210 224.621 1 2 350 540
Version 1 400 600 300 224.630 1 2 350 540
D
500 500 210 225.521 1 2 450 440
W
500 500 300 225.530 1 2 450 440
500 600 210 225.621 1 2 450 540
500 700 210 225.721 1 2 450 640

H
500 700 260 225.726 1 2 450 640
600 400 210 226.421 1 1 550 340
Version 2 600 600 210 226.621 1 2 550 540
D
600 600 300 226.630 1 2 550 540
600 800 210 226.821 1 2 550 740
W

600 800 300 226.830 1 2 550 740

H
Material : Body : 1,20 - 1,50 mm mild steel + RAL 7035 coating. DM series serve users in machine industries, automation 600 1000 300 226.030 1 2 550 940
Door : 1,20-1,50 mm mild steel + RAL 7035 coating. and control systems. 600 1200 300 226.230 2 S.H. 550 1140
Mounting plate : 2,00 mm galvanized steel 800 600 300 228.630 3 2 750 540
The body structure is completely welded, water- and dust- Version 3 800 800 300 228.830 1 2 750 740
IP Protection : Single-door : IP 66 resistant, and designed with a sealing foam gasket D
800 1000 300 228.030 1 2 750 940
Double-door : IP 54 W

800 1000 400 228.040 1 2 750 940

Glaze applications can be performed upon request and the
800 1200 300 228.230 2 S.H. 750 1140
Supply includes : 1 pcs body, 1 pcs door, 1 pcs mounting plate, series is under UL certification.

H
800 1200 400 228.240 2 S.H. 750 1140
1 pcs gland plate, 1 inner door rail (except 300H)
Stainless steel 304 (1,4301) please see page 127 for the 1000 1000 300 220.030 3 2 950 940
quality application 1000 1200 300 220.230 4 S.H. 950 1140
Version 4 1000 1400 300 220.430 4 S.H. 950 1340
UL Labels can be provided upon request during 1200 1200 400 222.240 4 S.H. 1150 1140
manufacturing
WALL BRACKET (optional)

Material : 2,50 mm mild steel+zink coated

Supply includes : 4 pcs wall bracket , gaskets

M8 connection screws

Reference No : 971.200

Gland Plate Structure Inner Door Rail

KNITTED EARTHING CABLE (optional)

9
44

27
Material : Cooper + Tın
20
Supply includes : 10 pcs

Cable Reference No : 991.200

9
20 27

44

20 21

IP66 IP65
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES SERIES ARES SERIES

22 23

IP66
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES SERIES ARES SERIES

bottom-top lids Enclosure Body

Door
Isolation gasket
3mm gasket
180° Hinge

Enclosure Body

Polyurethane Foam Gasket

isolation wall
gasket bracket

500 hours of foggy salt resistance test

Homogeneous coating dispersion

enclosure
body 70-90 μm epoxy polyester
powder coating

8-10 μm phosphate

Material

24 25

IP66
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES SOLID DOOR with MOUNTING PLATE ARES SOLID DOOR, without MOUNTING PLATE

Material : Enclosure and parts, door : 1,00 - 1,50 mm mild steel Material : Enclosure and parts, door : 1,00 – 1,50 mm mild steel
Mounting plate : 1,50 – 2,00 mm galvanized steel
Surface Process : Mild Steel Parts : Iron-phosphate plated, RAL7035 Rough Epoxy,
Surface Process : Mild Steel Parts : Iron-phosphate plated, RAL7035 polyester powder-coating
Rough Epoxy, polyester powder-coating
Mounting Plate : galvanized Protection Category : IP 66, (EN 60 529)

Protection Category :IP 66, (EN 60 529) Supply Includes : : 1 pcs body, 1 set bottom-top lid, 1 pcs front door,

H
2 pcs door support rail, 1 pcs door key.

H2

H
Supply Includes : 1 pcs body,1 set bottom-top lid, 1 pcs front door,

H2
2 pcs support rails, 1 pcs door key, 1 pcs mounting plate
Please see page 193 for technical drawings.
W2
W

Please see page 193 for technical drawings. Note : Marked codes do not include W
W2

support rails.
ENCLOSURE SIZES (mm)
WIDTH (W) HEIGHT (H) DEPTH (D) ARES REF. NO. W2 (mm) H2 (mm) LOCK HINGE WEIGHT (kg)
300 400 150 101.250* 249 334 1 2 5,5 ENCLOSURE SIZES (mm)
300 400 200 101.251* 249 334 1 2 6,0
400 400 200 101.252 349 334 1 2 7,5 WIDTH (W) HEIGHT (H) DEPTH (D) ARES REF. NO. LOCK HINGE WEIGHT (kg)
400 500 200 101.253* 349 414 1 2 9,0 300 400 150 101.350 1 2 4,4
400 600 200 101.254 349 534 2 2 10,5 300 400 200 101.351 1 2 4,9
400 600 280 101.255 349 534 2 2 11,8 400 400 200 101.352 1 2 6,0
500 500 200 101.265 449 434 2 2 11.4 400 500 200 101.353 1 2 7,0
500 500 280 101.266 449 434 2 2 13.4 400 600 200 101.354 2 2 8,1
500 600 200 101.256 449 534 2 2 13,1 400 600 280 101.355 2 2 9,4
500 700 200 101.257 449 634 2 2 14,9 500 600 200 101.356 2 2 10,0
500 700 280 101.258 449 634 2 2 16,5 500 700 200 101.357 2 2 11,3
600 800 200 101.259 549 734 2 2 19,5 500 700 280 101.358 2 2 12,9
600 800 280 101.260 549 734 2 2 21,3 600 800 200 101.359 2 2 14,4
600 1000 280 101.261 549 934 2 3 34,1 600 800 280 101.360 2 2 16,2
600 1150 280 101.262 549 1084 3 3 36,4 600 1000 280 101.361 2 3 23,6
800 800 200 101.267 749 734 2 2 24.6 600 1150 280 101.362 3 3 26,6
800 800 280 101.268 749 734 2 2 27.9 800 1000 280 101.363 2 3 29,2
800 1000 280 101.263 749 934 2 3 40,7 800 1150 280 101.364 3 3 32,8
800 1150 280 101.264 749 1084 3 3 46,1

26 27

IP66
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES GLAZED DOOR with MOUNTING PLATE ARES GLAZED DOOR without MOUNTING PLATE

Material : Enclosure and parts, door : 1,00-1,50 mm mild steel Material : Enclosure and parts, door :1,00- 1,50 mm mild steel
Mounting plate : 1,50 – 2,00 mm galvanized steel
Surface Process: : Mild steel parts : Iron-phosphate plated, RAL7035 Rough Epoxy,
Surface Process : Mild steel parts : Iron-phosphate plated, RAL7035 polyester powder-coating
Rough Epoxy, polyester powder-coating
Mounting plate : Galvanized Protection Category : IP 55, (EN 60 529)

Protection Category : IP 55, (EN 60 529) Supply Includes : 1 pcs body, 1 set bottom-top lid,1 pcs front glazed door,

H
2 pcs support rails, 1 pcs door key
Supply Includes : 1 pcs body, 1set bottom-top lid, 1 pcs front glazed door,
2 pcs support rails, 1 pcs door key ,1 pcs mounting plate
W2
W
H

Please see page 193 for technical drawings. Please see page 193 for technical drawings.

H2
*Codes do not have 2 pcs support rail.

W2
W

ENCLOSURE SIZES (mm)

WIDTH (W) HEIGHT (H) DEPTH (D) ARES REF. NO. LOCK HINGE WEIGHT (kg)
ENCLOSURE SIZES (mm) 400 500 200 101.553 1 2 6.8
WIDTH (W) HEIGHT (H) DEPTH (D) ARES REF. NO. W2 (mm) H2 (mm) LOCK HINGE WEIGHT (kg) 400 600 200 101.554 2 2 7.8
400 500 200 101.453 349 434 1 2 8,8 400 600 280 101.555 2 2 9.1
400 600 200 101.454 349 534 2 2 10,2 500 600 200 101.556 2 2 9.2
400 600 280 101.455 349 534 2 2 11,5 500 700 200 101.557 2 2 10.3
500 600 200 101.456 449 534 2 2 12,2 500 700 280 101.558 2 2 11.9
500 700 200 101.457 449 634 2 2 13,9 600 800 200 101.559 2 2 12.9
500 700 280 101.458 449 634 2 2 15,5 600 800 280 101.560 2 2 14.7
600 800 200 101.459 549 734 2 2 18,0 600 1000 280 101.561 2 3 21,0
600 800 280 101.460 549 734 2 2 19,8 600 1150 280 101.562 3 3 23.3
600 1000 280 101.461 549 934 2 3 31,5 800 1000 280 101.563 2 3 25,0
600 1150 280 101.462 549 1084 3 3 33,1 800 1150 280 101.564 3 3 27.9
800 1000 280 101.463 749 934 2 3 36,5
800 1150 280 101.464 749 1084 3 3 41,2

28 29

IP66
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES ACCESSORIES AND EQUIPMENTS ARES ACCESSORIES AND EQUIPMENTS

MAIN INTERIOR SUPPORT RAILS INTERIOR MOUNTING PLATE

Material : Mild steel, Material : Galvanized steel

RAL7035 powder-coating.
Supply includes : 1 pcs mounting plate and
Supply includes : 2 pcs support rails assembly parts
and assembly parts.

11

25
ENCLOSURE

170
WIDTH X1 mm REF. NO.
300 156 944.406 X1
ENCLOSURE 400 256 944.402
HEIGHT (H) REF. NO. VERTICAL PROFILE HEIGHT (mm) 500 356 944.403
600 456 944.404 ENCLOSURE
400 943.801 340
800 656 944.405
500 943.802 440 WIDTH A (mm) X1 mm REF. NO.
600 943.803 540 300 80 208 943.870
700 943.804 640 INTERIOR COVER PLATES 100 208 943.820
800 943.805 740 120 208 943.821
1000 943.806 940 160 208 943.822
1150 943.807 1090 Material : Mild steel, 400 80 308 943.871
RAL 7035 powder-coating. 100 308 943.823
120 308 943.824
Supply includes : 160 308 943.825
1 pcs plate and assembly parts 200 308 943.872
500 80 408 943.873
100 408 943.826
120 408 943.827
INTERIOR MOUNTING RAILS 160 408 943.828
Material : Mild steel, RAL7035 powder-coating. 200 408 943.874
600 80 508 943.875
Supply includes : 2 pcs rails and assembly parts. 100 508 943.829
120 508 943.830
160 508 943.831
ENCLOSURE 200 508 943.876
800 80 708 943.877
HEIGHT (H) REF. NO. 100 708 943.832
400 943.810 120 708 943.833
500 943.811 160 708 943.834
600 943.812 INTERIOR COVER PLATE FOR MCB 200 708 943.878
700 943.813
800 943.814
Material : Mild steel,
1000 943.815 RAL 7035 powder-coating.
1150 943.816 ENCLOSURE
Supply includes :
WIDTH A (mm) X1 mm X2 SWITCH CAP. REF. NO.
1 pcs plate and assembly parts
300 120 208,5 163 9 943.835
160 208,5 163 9 943.836
400 120 308,5 253 14 943.837
X min. Depth 200 mm : 93 mm 160 308,5 253 14 943.838
Depth 280 mm : 173 mm 500 120 408,5 361 20 943.839
160 408,5 361 20 943.840
X max. Depth 200 mm : 183 mm 600 120 508,5 469 26 943.841
Depth 280 mm : 213 mm 160 508,5 469 26 943.842
800 120 708,5 667 37 943.843
160 708,5 667 37 943.844

30 31

IP66
 COMPACT ENCLOSURES COMPACT ENCLOSURES
ARES ACCESSORIES AND EQUIPMENTS ARES ACCESSORIES AND EQUIPMENTS

SOLID INTERIOR DOOR 19” SWING FRAME

ENCLOSURE
WIDTH (W) HEIGHT (H) X(mm) Y(mm) REF. NO. Material : Mild steel, RAL7035 powder-coating.
300 400 239 232 943.845
400 400 339 232 943.846 Supply includes : 1 pcs hinged, locked swing frame and support rails.
500 339 432 943.847
600 339 532 943.848
500 600 439 532 943.849 ENCLOSURE
700 439 632 943.850
WIDTH HEIGHT U REF. NO.
600 800 539 732 943.851
1000 539 932 943.852 600 800 14 943.867
1150 539 1082 943.853 600 1000 18 943.868
800 1000 739 932 943.854 600 1150 22 943.869
1150 739 1082 943.855

INTERIOR DOOR FOR MCB ARES PLINTH

Material : Mild Steel, RAL 7035 powder coating

Supply includes : 1 pcs plinth, lids and assembly parts

Material : Mild steel, RAL7035

100
powder-coating
ENCLOSURE
Supply includes :
1 set hinge, 1 pcs locked interior WIDTH DEPTH REF. NO.
door and support rails. 500 200 915.106

260-180
500 280 915.107
600 200 915.108
600 280 915.109
800 280 915.110

GLAND PLATE WITH FOAM ISOLATION

ENCLOSURE
Enclosure W300 x H400 mm Enclosure W400 x H400 mm Material : Mild Steel,
Ref. No.: 943.856 Ref. No.: 943.857 RAL 7035 powder coating WIDTH DEPTH REF. NO.
and EPDM foam gasket 500 200 925.101
500 280 925.102
Supply includes : Gland plate, press part
600 200 925.103
and gasket
600 280 925.104
800 280 925.105

Enclosure W400 x H500 mm Enclosure W400 x H600 mm Enclosure W500 x H600 mm Enclosure W600 x H800 mm
Ref. No.: 943.858 Ref. No.: 943.859 Ref. No.: 943.860 Ref. No.: 943.862 CABLE CLAMP RAIL

ENCLOSURE
Material : Galvanized Steel
WIDTH REF. NO.
Supply includes : 1 pcs rail and assembly parts 500 997.121
600 997.122
800 997.123
Enclosure W600 x H1000 mm Enclosure W600 x H1150 mm Enclosure W800 x H1000 mm Enclosure W800 x H1150 mm
Ref. No.: 943.863 Ref. No.: 943.864 Ref. No.: 943.865 Ref. No.: 943.866

32 33

IP66
 A

23
COMPACT ENCLOSURES COMPACT ENCLOSURES
25,5

ARES ACCESSORIES AND EQUIPMENTS ARES ACCESSORIES AND EQUIPMENTS

29,5
5

50
7

KNITTED EARTHING CABLE WALL BRACKET

8,5
A

RAIN CANOPY 7
25,5

Length : 260 mm

29,5
5
1
Quantity : 10

50
7

Ref.No : 991.201

8,5
48
7
DETAIL B

: 991.204 (per pcs)

25,5 SCALE 2 : 1

20
A

20 Assembly screws are not

included. DETAIL B
SCALE 2 : 1

Quantity :4 pcs wall bracket,

23
screws and gaskets
MCB RAIL (H15) 25,5
Ref.No : 971.100

ENCLOSURE
Quantity : 1
WIDTH DEPTH REF. NO. Material : Galvanized steel, RAL 7035 powder-coating
Ref.No : 990.100
300 200 934.101 : 990.102 (7,5mm)
Supply includes : 1 pcs rain canopy, 1 pcs special assembly plate and assembly parts MCB BLANK PLATE
400 200 934.102
280 934.103
500 200 934.104 Length : 175 mm
280 934.105 Quantity :1
600 200 934.106
Ref.No : 990.101
280 934.107
800 280 934.108
LAMP RAIL
PLINTH FOR OUTDOOR USE Quantity : 1 pcs, screws
A
LAMP 230V – 6W
Ref.No : 903.151 500 (W)

ENCLOSURE : 903.152 600 (W) Ref.No : 901.110

: 903.153 800 (W) : 901.130 (LED 4W 30 cm)
WIDTH DEPTH REF. NO.
: 901.140 (LED 7W 57 cm)
500 200 915.101
300

500 280 915.102 Lamp rail is required for

600 200 915.103
assembling.
600 280 915.104
800 280 915.105 SPECIAL LOCK INSERTS SPECIAL KEYS
240 / 320

Material : Galvanized steel, RAL 7035 powder-coating Ref.No :

952.200
Supply includes : 1 pcs outdoor plinth and assembly parts

Ref.No :
B

TRIANGLE INSERT SQUARE INSERT 952.201

DOOR RAIL (For Mounting Cable Duct) Quantity : 1 Quantity : 1
Ref.No : 951.211 Ref.No : 951.212 SPARE PARTS

Material : Galvanized steel

ENCLOSURE
HANDLE LOCK
Supply includesi : 1 pcs door rail and WIDTH REF. NO.
assembly parts 400 997.201 Quantity : 1
500 997.203
Ref.No : 951.205
600 997.204
800 997.205
M5x10 SELF TAPPING DOUBLEBIT KEY
SCREW Quantity :1
Quantity :100 Ref.No : 952.100
Ref.No : 993.105
34 35

IP66
 OTOMASYON ve KONTROL SİSTEMLERİ FLOORSTANDING CABINETS
ÖLÇÜLER ve MODELLER

Page 38-59

NEO MODULAR Page 60-79

NEO MONOBLOCK Page 80-85

FLOOR STANDING CABINET’S

MOUNTING SUPPORT PRODUCTS Page 86-113

36 37
SEISMIC
IP65
TESTED
 FLOORSTANDING MODULAR CABINET FLOORSTANDING MODULAR CABINET

38 39
SEISMIC
IP65
TESTED
 INTERNATIONAL CERTIFICATES

POWERED FRAME STRUCTURE

SEISMIC (EARTHQUAKE) RESISTANCE TEST REPORT

ZONE 3 ZONE 4
1.7. Testing laboratory 1.7. Testing laboratory
1. GENERAL DATA
1. GENERAL DATA P&P LMC S.r.l.
P&P LMC S.r.l.
via Pastrengo, 9 1.1. Customer via Pastrengo, 9
24068 Seriate (BG) 24068 Seriate (BG)
1.1. Customer ITALY
ITALY TEKPAN TEKNIK ELEKTRIK,
TEKPAN TEKNIK ELEKTRIK, Ankara Asfalt 14. km. Istiklal Mh. 17. Sk. No.8
1.8. Test date Ulucak Kemalpasa / Izmir 1.8. Test date
Ankara Asfalt 14. km. Istiklal Mh. 17. Sk. No.8
Ulucak Kemalpasa / Izmir TURKEY October 17th – 18th, 2012.
October 17th – 18th – 19th – 22nd, 2012.
TURKEY
1.9. Responsibilities 1.2. Unit under test 1.9. Responsibilities
1.2. Unit under test
A. Bonzi, test responsible The tests were performed on the following unit: A. Bonzi, test responsible
The tests were performed on the following unit: M. Civera, test engineer M. Civera, test engineer
• TEOS Plus+ single door enclosure, with a total mass of 315 kg.
• TEOS plus+ double door enclosure, with a total mass of 395 kg. D. Recalcati, test engineer D. Recalcati, test engineer
1.3. Manufacturer
1.3. Manufacturer
2. TESTING PROCEDURES TEKPAN TEKNIK ELEKTRIK. 2. TESTING PROCEDURES
TEKPAN TEKNIK ELEKTRIK.
2.1. General remarks 1.4. Reference documents 2.1. General remarks
1.4. Reference documents
To perform the tests, three reference directions have been considered for the unit: X (front - rear), Y 1.4.1. Contract documents To perform the tests, three reference directions have been considered for the unit: X (front - rear), Y
1.4.1. Contract documents (side - side) and Z (vertical).
(side - side) and Z (vertical). a. Offer P&P LMC No. OF-AB-041/12 rev.01, dated June 18th, 2012.
a. Offer P&P LMC No. OF-AB-041/12 rev.01, dated June 18th, 2012.
The sequence of the tests for the unit has been: The sequence of the tests for the unit has been:
b. Order Tekpan dated June 19 , 2012. rd
b. Order Tekpan dated June 19rd, 2012.
• Seismic tests, performed in three directions (X, Y, Z) and consisted in: • Seismic tests, performed in three directions (X, Y, Z) and consisted in:

Turkish Patent No: TR 201009615Y

- vibration response investigation 1.4.2. Technical documents and standards - vibration response investigation
1.4.2. Technical documents and standards
- earthquake - earthquake
1. Telcordia Generic Requirement GR-63-CORE, NEBS Requirements: Physical Protection, Issue - vibration response investigation 1. Telcordia Generic Requirement GR-63-CORE, NEBS Requirements: Physical Protection, Issue - vibration response investigation
1, October 1995; All the applied vibrations were monodirectional. 1, October 1995;
All the applied vibrations were monodirectional.
2. IEC 60068-3-3: Environmental testing - Part 3: Guidance – Seismic test methods for equipment; Tests in Z direction were performed on a vertical shaking table moved by an electro-dynamic shaker. 2. IEC 60068-3-3: Environmental testing - Part 3: Guidance – Seismic test methods for equipment;
Tests in Z direction were performed on a vertical shaking table moved by an electro-dynamic shaker.
3. IEC 60068-2-6: Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal); For the other excitation directions, a horizontal shaking table was used. Excitation directions are 3. IEC 60068-2-6: Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal); For the other excitation directions, a horizontal shaking table was used. Excitation directions are
shown in the photographs. shown in the photographs.
4. IEC 60068-2-57: Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history 4. IEC 60068-2-57: Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history
method; All the performed tests are listed in the table of page from 15. Tests were numbered following the method; All the performed tests are listed in the tables of page 15. Tests were numbered following the

Produced with a closed rail structure, Teos

chronological sequence. chronological sequence.
5. ISO 2041 Vibration and Shock – Vocabulary. 5. ISO 2041 Vibration and Shock – Vocabulary.
2.2. Mounting techniques 2.2. Mounting techniques
1.5. Test objective 1.5. Test objective

enclosure rails are clamped with a special

For all tests the unit was mounted in its intended operating configuration. For all tests the unit was mounted in its intended operating configuration.
The purpose of the tests were to demonstrate that the unit behave in compliance with the requirements The purpose of the tests were to demonstrate that the unit behave in compliance with the requirements
stated in doc. |1| to |4| referring to a seismic risk classified as Zone 3. The unit was fixed to the shaking table with No. 12 M14 screws with a tightening torque of 80 Nm. stated in doc.|1| to |4| referring to a seismic risk classified as Zone 4. The unit was fixed to the shaking table with No. 8 M14 screws with a tightening torque of 80 Nm.

non-welded clamping system. Their resistance

1.6. Tests overall results 2.3. Control and measuring positions 1.6. Tests overall results 2.3. Control and measuring positions
At the end of the tests, at a visual inspection, any damages on the unit were detected. During the tests, for the motion control the signal of a monoaxial accelerometer in the excitation During the tests, for the motion control the signal of a monoaxial accelerometer in the excitation
At the end of the tests, at a visual inspection, no damages on the unit were detected.

to both vertical and horizontal pressures is

direction (CP1) was used. Moreover two triaxial accelerometers (MP1 and MP2) were placed on the direction (CP1) was used. Moreover two triaxial accelerometers (MP1 and MP2) were placed on the
unit for the vibration measurement (see photos). In the table reported below are summarized model unit for the vibration measurement (see photos). In the table reported below are summarized model
and serial number of the transducers mounted in the control and measuring positions during the tests. and serial number of the transducers mounted in the control and measuring positions during the tests.

extremely high compared to open rail structures.

Ident ification Tit le
Ident ification Tit le
RT-AB-085/12, rev. 00 Seismic tests on double door enclosure Teos Plus+ page 4 of 69 Ident ification Tit le
On behalf of:Tekpan Teknik Elektrik - Ulucak Kemalpasa / Izmir - Turkey RT-AB-084/12, rev. 00 Seismic tests on single door enclosure Teos Plus+ page 4 of 69 Ident ification Tit le
RT-AB-085/12, rev. 00 Seismic tests on double door enclosure Teos Plus+ page 5 of 69
On behalf of:Tekpan Teknik Elektrik - Ulucak Kemalpasa / Izmir - Turkey RT-AB-084/12, rev. 00 Seismic tests on single door enclosure Teos Plus+ page 5 of 69
On behalf of:Tekpan Teknik Elektrik - Ulucak Kemalpasa / Izmir - Turkey

This force enables full resistance for the

On behalf of:Tekpan Teknik Elektrik - Ulucak Kemalpasa / Izmir - Turkey

movement of the installed equipments and

Zone3’ All Teos series products are within the scope of ‘For ‘Zone 4’ seismic resistance tests, an enclosure sized 800 resistance in overcurrents.
Zone 3 seismic resistance tests. width x 2000+100 height x 800 with an extra reinforced interior
and welded plinth was used.
Zone3’ test was conducted for double-door enclosures of EARTING CONTINUTIY
size 1200 widthx2000+100 height and 600 mm depth, and The abovementioned size and structure are required for your
covers all sizes and types of the Teos series. needs within the scope of ‘Zone 4’. Please contact our sales
department for your needs.
You can view the complete report on our websites
You can view the complete report on our websites

UL CERTIFICATE VALID CERTIFICATE IN THE

USA AND CANADA

Placed on the aliminium corner Placed on the bottom-top inner parts Applied to all other cover plates, the
combination, the earthing hooks are of the front door, the earthing screw earthing screws allow for the complete
CERTIFICATE tightly mounted on the uncoated inner increases conductive surface. Thereby, earthing of all enclosure cover plates.
surface of the rails by means of eroding. the front door is more efficiently Furtermore, Teos Plus+ allows for earting
Thereby, the earthing continuity is ensured grounded as the most important part to all parts by use of special grounding
for all rails and their parts be grounded. washers.

CORROSION PROTECTION

70-90 μm epoxy polyester

powder-coating

8-10 μm fosfat

Metal
Teos closed frame made by galvanized Manufactured from aliminum-cast All coated parts respectively undergo
steel (DIN EN 10142_00 DX51 D+Z) and (E-160) material, the rail connection the automatic processes of washing,
coated iron-phosphated and powder corners do not corrode thanks to their phosphating, deionized passivation-
coated from outside of the surface. aliminium structure. drying- coating- firing and are treated
Non-powder coated inside surface can with active coating. 500 hour salt test
not corrade because of the galvanized resistance is acquired according to the
material style. test results of this process
You can view the complete report on our websites
40 41
SEISMIC
IP65
TESTED
 EASY ASSEMBLING AND LOGISTICAL ADVANTAGES FRONT DOOR

Lock and hinge placed in four points

2
1
Wide Space and Strong Door Rail

Since locking is performed on the

rails, inner space of the cover plates
allows for a maximum efficiency.

As the closed support rails are

manufactured as a completely closed
box, they are more resistant to bending.

4
This ensures a stronger cover plate

3
Offered as flat package, the TEOS Plus+ series is designed Offered as flat package, TEOS Plus+ series save space Standard swing handle lock
for an easy mounting in a minimal amount of time. It does during transportation and storage. However, since
not require angulation for the body and can be mounted packages can be replaced with each other, they provide
between 15-20 minutes by two people. more solutions with less inventory.

PLINTH SYSTEM

Rigid and Durable Lock Structure

Lock failures experienced in most enclosures are prevented in TEOS Plus+. Thanks to
their corrugated and long-lasting structure, the locking plates do not bend and corrode.

Front surfaces of the corner parts are open in the plinth Plinth front panels are mounted with screws while the side
system which is designed with a height of 100 mm and 200 panels are screwed from the inside.
mm. This enables not only an easy mounting on the enclosure
but also an easy ground fixing. Upon the. Completion of this A separate corner can be used for plinth applications with a
process, the plastic panel closes without use of screws. height of 200 mm as well as plinths with a height of 100 mm
can be superimposed to reach the 200 mm height.
42 43
SEISMIC
IP65
TESTED
 IP 55 - IP 65 PROTECTION CATEGORY MOUNTING PLATE SYSTEM

Sealing foam gaskets are used

on the body door, back door,
side panels and top panels of the
enclosure. This gasket enables
complete isolation between
-40°C and +100°C.

All gaskets apply pressure on

the convex frame curves. Dust
and water particles are left in
the space between the convex
curves, and thus pressure on the
gasket is prevented.

Manufactured from a 3,00 mm galvanized steel, TEOS plus+ Connected to the mounting plates, the intermediate mounting
mounting plates are railed and easily mounted. With its thick plate increases space and can move back and front together
All seal applications on the covers steel sheet structure, the mounting plate can carry heavy with the mounting plates.
press on the convex curves in equipment with its rigid structure and does not need additional
the carcasses Dust and water side support parts. In this way, bayed enclosure space is
droplets are left in the area increased in combined enclosures.
between these convex curves
and the pressure on the seal is
prevented.

Applied to double-door
enclosures, the insulating gasket
assumes a full protective role
between two panels and the
frame when both doors close
over the gasket.

Applied to all front doors and

panels, the liquid seal is used in
all double-door enclosures and
acts as an insulator between
two doors. Locking system of
both doors work separately
and this enables a full gasket
pressing

44 45
SEISMIC
IP65
TESTED
 SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

TOP/BOTTOM GROUP PLINTH CORNER PART

Relevant Size : ENCLOSURE WIDTH x DEPTH
Material : Body : 1,50 mm galvanized steel+RAL7035 powder-coating Relevant Size : PLINTH HEIGHT
Top Cover : 1,50 mm mild steel +RAL7035 powder-coating
Bottom : 1,50 mm mild steel + RAL7035 powder-coating Material : Corner part : 2,00 mm galvanized steel + RAL 7012
Gland Plate : 1,50 mm galvanized steel powder-coating
Plastic Panel : RAL 7012 ABS Plastic
Supply includes : 1 set of upper body, 1 set of lower body, 1 pcs gland plate,
1 pcs top cover and body mounting parts. Supply includes : 4 pcs 100 mm or 200 mm high plinth corner part,
4 pcs plastic panel and mounting parts
Note : 4 pcs eyebolts is added upon your request.
Note : Please see page 86-87 for plinth accessories.

TEOS PLINTH REFERENCE

TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm HEIGHT(H2) NO.

WIDTH DEPTH REFERENCE WIDTH DEPTH REFERENCE WIDTH DEPTH REFERENCE 100 708.100
(W) (D) NO. (W) (D) NO. (W) (D) NO. 200 708.200
400 500 701.450 700 400 701.740 1000 400 701.040
400 600 701.460 700 500 701.750 1000 500 701.050
400 800 701.480 700 600 701.760 1000 600 701.060
600 400 701.640 700 800 701.780 1000 800 701.080
600 500 701.650 800 400 701.840 1200 400 701.240
600 600 701.660 800 500 701.850 1200 500 701.250
PLINTH FRONT COVERS PLINTH SIDE COVERS
600 800 701.680 800 600 701.860 1200 600 701260
800 800 701.880 1200 800 701.280

VERTICAL FRAME GROUP

Relevant Size : ENCLOSURE HEIGHT

Material : Frame : 1,50 mm galvanized steel +

RAL7035 powder-coating

Supply includes : 4 pcs vertical frame

Relevant Size : ENCLOSURE WIDTH Relevant Size : ENCLOSURE DEPTH

HEIGHT REFERENCE
(H) NO.
Material : 1,50 mm galvanized steel + Material : 1,50 mm galvanized steel +
1200 702.120 RAL 7012 powder-coating RAL 7012 powder-coating
1600 702.160
1800 702.180 Supply includes : 2 pcs 100 mm high front plinth panel Supply includes : 2 pcs 100 mm high side plinth panel
2000 702.200 and mounting parts and mounting parts
2200 702.220
Required : 2 sets of front plinth panel group Required : 2 sets of front plinth panel group
for 200 mm height plinths. for 200 mm high plinths.

ENCLOSURE REFERENCE
WIDTH(W) NO. ENCLOSURE REFERENCE
400 709.140 DEPTH(D) NO.
600 709.160 400 710.140
700 709.170 500 710.150
800 709.180 600 710.160
1000 709.100 800 710.180
1200 709.120
46 47
SEISMIC
IP65
TESTED
 SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

SOLID FRONT DOOR GLAZED FRONT DOOR

REAR PANEL GROUP

Relevant size : ENCLOSURE WIDTH x HEIGHT

Material : 1,50 mm mild steel + RAL 7035 powder-coating

Supply includes : 1 pcs rear panel and mounting parts

TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm

WIDTH HEIGHT REFERENCE WIDTH HEIGHT REFERENCE WIDTH HEIGHT REFERENCE Relevant size : ENCLOSURE WIDTH x HEIGHT
(W) (HT) NO. (W) (HT) NO. (W) (HT) NO.
Material : Solid Door : 2,00 mm mild steel + RAL 7035 powder-coating
400 1800 703.418 700 1800 703.718 1000 1800 703.018 Glazed Door : 2,00 mm mild steel + RAL 7035 powder-coating
400 2000 703.420 700 2000 703.720 1000 2000 703.020 4,00 mm tempered glass
600 1200 703.612 800 1200 703.812 1200 1200 703.212 Supply includes : Solid Door : 1 pcs solid door, 1 set of lock, 4 set hinges and door stiffeners
600 1600 703.616 800 1600 703.816 1200 1600 703.216 Glazed Door : 1 adet Glazed Door , 1 pcs glazed door, 1 set of lock, 4 sets of hinge and door support profile
600 1800 703.618 800 1800 703.818 1200 1800 703.218
Attention : 800 mm and 1000 mm wide enclosures come in both single and double-door versions. 1200 mm wide enclosures come
600 2000 703.620 800 2000 703.820 1200 2000 703.220 only in double-door versions. Only 600 mm and 800mm wide enclosures come with glazed doors.
600 2200 703.622 800 2200 703.822 1200 2200 703.222
Attention : Doors of the double-door version are delivered in two separate packages.

TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm

SIDE PANELS WIDTH HEIGHT DOOR REFERENCE WIDTH HEIGHT DOOR REFERENCE WIDTH HEIGHT DOOR REFERENCE
(W) (H) NO. (W) (H) NO. (W) (H) NO.
400 1800 Single 724.418 800 1200 Single 724.812 1000 1800 Double 724.018
Relevant size : ENCLOSURE HEIGHT x DEPTH
400 2000 Single 724.420 800 1600 Single 724.816 1000 2000 Double 724.020
Material : 1,50 mm mild steel + RAL 7035 powder-coating 600 1200 Single 724.612 800 1800 Single 724.818 1000 2000 Single 724.021
600 1600 Single 724.616 800 1800 Double 724.811 1200 1200 Double 724.212
Supply includes : 2 pcs side panel and mounting parts 600 1800 Single 724.618 800 2000 Single 724.820 1200 1600 Double 724.216
600 2000 Single 724.620 800 2000 Double 724.821 1200 1800 Double 724.218
600 2200 Single 724.622 800 2200 Single 724.822 1200 2000 Double 724.220
700 2000 Single 724.720 1200 2200 Double 724.222

GLAZED DOOR GLAZED DOOR GLAZED DOOR

600 1800 Single 725.618 800 1800 Single 725.818
600 2000 Single 725.620 700 2000 Single 725.720 800 2000 Single 725.820
TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm
HEIGHT DEPTH REFERENCE HEIGHT DEPTH REFERENCE HEIGHT DEPTH REFERENCE
(H) (D) NO. (H) (D) NO. (H) (D) NO.
1200 400 706.124 1800 400 706.184 2000 400 706.204
1200 500 706.125 1800 500 706.185 2000 500 706.205
1200 600 706.126 1800 600 706.186 2000 600 706.206
1600 400 706.164 1800 800 706.188 2000 800 706.208
1600 500 706.165 2200 600 706.226
1600 600 706.166

48 49
SEISMIC
IP65
TESTED
 SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

W D
MOUNTING PLATE
Relevant size : ENCLOSURE WIDTH x HEIGHT
TEOS plus ENCLOSURE mm
Material : 3,00 mm Galvanized steel
WIDTH HEIGHT REFERENCE H
Supply includes : 1 pcs mounting plate and (W) (H) NO.
mounting parts. 400 1800 707.418
400 2000 707.420
400 1800 717.418
400 2000 717.420 H2

HEIGHT HEIGHT
TEOS plus ENCLOSURE mm TEOS plus ENCLOSURE mm (H): 1200 mm (H): 1600 mm
WIDTH HEIGHT REFERENCE WIDTH HEIGHT REFERENCE ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDHT mm (W) ENCLOSURE WIDHT mm (W)
TEOS plus ENCLOSURE mm (W) (H) NO. (W) (H) NO.
Single Door Single Door Double Door Single Door Single Door Double Door
WIDTH HEIGHT REFERENCE 700 1800 707.718 1000 1800 707.018 STEP PRODUCT DESCRIPTION 600 800 1200 600 800 1200
(W) (H) NO. 700 2000 707.720 1000 2000 707.020
1 TOP/BOTTOM GROUP 701.650 701.850 701.250 701.650 701.850 701.250
600 1200 707.612 800 1200 707.812 1200 1200 707.212
2 VERTICAL FRAMES GROUP 702.120 702.120 702.120 702.160 702.160 702.160
600 1600 707.616 800 1600 707.816 1200 1600 707.216
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 708.100 708.100 708.100
600 1800 707.618 800 1800 707.818 1200 1800 707.218
3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200 708.200 708.200 708.200
600 2000 707.620 800 2000 707.820 1200 2000 707.220
4 PLINTH FRONT COVERS H100mm (H2) 709.160 709.180 709.120 709.160 709.180 709.120
600 2200 707.622 800 2200 707.822 1200 2200 707.222
5 PLINTH SIDE COVERS H100mm (H2) 710.150 710.150 710.150 710.150 710.150 710.150
6 REAR PANEL 703.612 703.812 703.212 703.616 703.816 703.216
7 FRONT DOOR (SOLID) 724.612 724.812 724.212 724.616 724.816 724.216
8 SIDE PANELS (2 pcs.) 706.165 706.165 706.165
INTERMEDIATE MOUNTING PLATE 706.125 706.125 706.125
707.616 707.816 707.216
9 MOUNTING PLATE 707.612 707.812 707.212
10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000
Relevant size : ENCLOSURE HEIGHT ENCLOSURE REFERENCE
HEIGHT(H) NO.
Material : 2,00 mm galvanized steel
1200 712.120
Supply includes : 1 pcs mounting plate, 1600 712.160
3 pcs bracket and mounting parts 1800 712.180
2000 712.200
2200 712.220

BAYING KIT
Material : 3,00 mm - 4,00 mm mild steel parts + zinc coated

Supply includes : 2 pcs combination, 4 pcs angular brackets,
2 pcs adjustable bracket, 4 pcs fixing bracket,
5,60 m intermediate insulation gasket and mounting parts

Reference number : 711.000

Note : Please see page 89-90 for other

combination and support systems.

50 51
SEISMIC
IP65
TESTED
 SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

HEIGHT (H): 2000 mm

ENCLOSURE DEPTH 400 mm (D) ENCLOSURE WIDTH mm (W)
HEIGHT (H): 1800 mm Single Door Single Door Single Door Double Door Single Door Double Door Double Door
STEP PRODUCT DESCRIPTION 600 700 800 800 1000 1000 1200
ENCLOSURE DEPTH 400 mm (D) ENCLOSURE WIDTH mm (W)
1 TOP/BOTTOM GROUP 701.640 701.740 701.840 701.840 701.040 701.040 701.240
Single Door Single Door Double Door Double Door Double Door
2 VERTICAL FRAMES GROUP 702.200 702.200 702.200 702.200 702.200 702.200 702.200
STEP PRODUCT DESCRIPTION 600 800 800 1000 1200
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 708.100 708.100 708.100 708.100
1 TOP/BOTTOM GROUP 701.640 701.840 701.840 701.040 701.240 3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200 708.200 708.200 708.200 708.200
2 VERTICAL FRAMES GROUP 702.180 702.180 702.180 702.180 702.180 4 PLINTH FRONT COVERS H100mm (H2) 709.160 709.170 709.180 709.180 709.100 709.100 709.120
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 708.100 708.100 5 PLINTH SIDE COVERS H100mm (H2) 710.140 710.140 710.140 710.140 710.140 710.140 710.140
3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200 708.200 708.200 6 REAR PANEL 703.620 703.720 703.820 703.820 703.020 703.020 703.220
4 PLINTH FRONT COVERS H100mm (H2) 709.160 709.180 709.180 709.100 709.120 7 FRONT DOOR (SOLID) 724.620 724.720 724.820 724.821 724.021 724.020 724.220
5 PLINTH SIDE COVERS H100mm (H2) 710.140 710.140 710.140 710.140 710.140 7 FRONT DOOR (GLAZED) 725.620 725.720 725.820 - - - -
6 REAR PANEL 703.618 703.818 703.818 703.018 703.218 8 SIDE PANELS (2 pcs) 706.204 706.204 706.204 706.204 706.204 706.204 706.204
7 FRONT DOOR (SOLID) 724.618 724.818 724.811 724.018 724.218 9 MOUNTING PLATE 707.620 707.720 707.820 707.820 707.020 707.020 707.220
7 FRONT DOOR (GLAZED) 725.618 725.818 - - - 10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000 711.000
8 SIDE PANELS (2 pcs.) 706.184 706.184 706.184 706.184 706.184
9 MOUNTING PLATE 707.618 707.818 707.818 707.018 707.218 ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDTH mm (W)
10 BAYING KIT 711.000 711.000 711.000 711.000 711.000
Single Door Single Door Single Door Single Door Double Door Single Door Double Door Double Door
STEP PRODUCT DESCRIPTION 400 600 700 800 800 1000 1000 1200
1 TOP/BOTTOM GROUP 701,450 701.650 701.750 701.850 701.850 701.050 701.050 701.250
ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDTH mm (W) 2 VERTICAL FRAMES GROUP 702,200 702.200 702.200 702.200 702.200 702.200 702.200 702.200
3 PLINTH CORNER PART H100mm (H2) 708,100 708.100 708.100 708.100 708.100 708.100 708.100 708.100
Single Door Single Door Single Door Double Door Double Door Double Door 3 PLINTH CORNER PART H200mm (H2) 708,200 708.200 708.200 708.200 708.200 708.200 708.200 708.200
STEP PRODUCT DESCRIPTION 400 600 800 800 1000 1200 4 PLINTH FRONT COVERS H100mm (H2) 709,140 709.160 709.170 709.180 709.180 709.100 709.100 709.120
1 TOP/BOTTOM GROUP 701.450 701.650 701.850 701.850 701.050 701.250 5 PLINTH SIDE COVERS H100mm (H2) 710,150 710.150 710.150 710.150 710.150 710.150 710.150 710.150
2 VERTICAL FRAMES GROUP 702.180 702.180 702.180 702.180 702.180 702.180 6 REAR PANEL 703,420 703.620 703.720 703.820 703.820 703.020 703.020 703.220
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 708.100 708.100 708.100 7 FRONT DOOR (SOLID) 724,420 724.620 724.720 724.820 724.821 724.021 724.020 724.220
3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200 708.200 708.200 708.200 7 FRONT DOOR (GLAZED) - 725.620 725.720 725.820 - - - -
4 PLINTH FRONT COVERS H100mm (H2) 709.140 709.160 709.180 709.180 709.100 709.120 8 SIDE PANELS (2 pcs) 706,205 706.205 706.205 706.205 706.205 706.205 706.205 706.205
5 PLINTH SIDE COVERS H100mm (H2) 710.150 710.150 710.150 710.150 710.150 710.150 9 MOUNTING PLATE - 707.620 707.720 707.820 707.820 707.020 707.020 707.220
6 REAR PANEL 703.418 703.618 703.818 703.818 703.018 703.218 10 BAYING KIT 711,000 711.000 711.000 711.000 711.000 711.000 711.000 711.000
7 FRONT DOOR (SOLID) 724.418 724.618 724.818 724.811 724.018 724.218
7 FRONT DOOR (GLAZED) - 725.618 725.818 - - - ENCLOSURE DEPTH 600 mm (D) ENCLOSURE WIDTH mm (W)
8 SIDE PANELS (2 pcs.) 706.185 706.185 706.185 706.185 706.185 706.185
Single Door Single Door Single Door Single Door Double Door Single Door Double Door Double Door
9 MOUNTING PLATE - 707.618 707.818 707.818 707.018 707.218 STEP PRODUCT DESCRIPTION 400 600 700 800 800 1000 1000 1200
10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000
1 TOP/BOTTOM GROUP 701,460 701.660 701.760 701.860 701.860 701.060 701.060 701.260
2 VERTICAL FRAMES GROUP 702,200 702.200 702.200 702.200 702.200 702.200 702.200 702.200
3 PLINTH CORNER PART H100mm (H2) 708,100 708.100 708.100 708.100 708.100 708.100 708.100 708.100
3 PLINTH CORNER PART H200mm (H2) 708,200 708.200 708.200 708.200 708.200 708.200 708.200 708.200
4 PLINTH FRONT COVERS H100mm (H2) 709,140 709.160 709.170 709.180 709.180 709.100 709.100 709.120
ENCLOSURE DEPTH 600 mm (D) ENCLOSURE WIDTH mm (W)
5 PLINTH SIDE COVERS H100mm (H2) 710,160 710.160 710.160 710.160 710.160 710.160 710.160 710.160
Single Door Single Door Single Door Double Door Double Door Double Door 6 REAR PANEL 703,420 703.620 703.720 703.820 703.820 703.020 703.020 703.220
STEP PRODUCT DESCRIPTION 400 600 800 800 1000 1200 7 FRONT DOOR (SOLID) 724,420 724.620 724.720 724.820 724.821 724.021 724.020 724.220
1 TOP/BOTTOM GROUP 701.460 701.660 701.860 701.860 701.060 701.260 7 FRONT DOOR (GLAZED) - 725.620 725.720 725.820 - - - -
2 VERTICAL FRAMES GROUP 702.180 702.180 702.180 702.180 702.180 702.180 8 SIDE PANELS (2 pcs) 706,206 706.206 706.206 706.206 706.206 706.206 706.206 706.206
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 708.100 708.100 708.100 9 MOUNTING PLATE - 707.620 707.720 707.820 707.820 707.020 707.020 707.220
3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200 708.200 708.200 708.200 10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000 711.000 711.000
4 PLINTH FRONT COVERS H100mm (H2) 709.140 709.160 709.180 709.180 709.100 709.120
5 PLINTH SIDE COVERS H100mm (H2) 710.160 710.160 710.160 710.160 710.160 710.160 ENCLOSURE DEPTH 800 mm (D) ENCLOSURE WIDTH mm (W)
6 REAR PANEL 703.418 703.618 703.818 703.818 703.018 703.218
Single Door Single Door Single Door Single Door Double Door Single Door Double Door Double Door
7 FRONT DOOR (SOLID) 724.418 724.618 724.818 724.811 724.018 724.218 STEP PRODUCT DESCRIPTION 400 600 700 800 800 1000 1000 1200
7 FRONT DOOR (GLAZED) - 725.618 725.818 - - -
8 SIDE PANELS (2 pcs.) 706.186 706.186 706.186 706.186 706.186 706.186 1 TOP/BOTTOM GROUP 701,480 701.680 701.780 701.880 701.880 701.080 701.080 701.280
9 MOUNTING PLATE - 707.618 707.818 707.818 707.018 707.218 2 VERTICAL FRAMES GROUP 702,200 702.200 702.200 702.200 702.200 702.200 702.200 702.200
10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000 3 PLINTH CORNER PART H100mm (H2) 708,100 708.100 708.100 708.100 708.100 708.100 708.100 708.100
3 PLINTH CORNER PART H200mm (H2) 708,200 708.200 708.200 708.200 708.200 708.200 708.200 708.200
4 PLINTH FRONT COVERS H100mm (H2) 709,140 709.160 709.170 709.180 709.180 709.100 709.100 709.120
5 PLINTH SIDE COVERS H100mm (H2) 710,180 710.180 710.180 710.180 710.180 710.180 710.180 710.180
6 REAR PANEL 703,420 703.620 703.720 703.820 703.820 703.020 703.020 703.220
7 FRONT DOOR (SOLID) 724,420 724.620 724.720 724.820 724.821 724.021 724.020 724.220
7 FRONT DOOR (GLAZED) - 725.620 725.720 725.820 - - - -
8 SIDE PANELS (2 pcs) 706,208 706.208 706.208 706.208 706.208 706.208 706.208 706.208
9 MOUNTING PLATE - 707.620 707.720 707.820 707.820 707.020 707.020 707.220
10 BAYING KIT 711.000 711.000 711.000 711.000 711.000 711.000 711.000 711.000
52 53
SEISMIC
IP65
TESTED
 SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (ASSEMBLED)

HEIGHT (H): 2200 mm SOLID DOOR, MOUNTING PLATE

W D ENCLOSURE DEPTH 600 mm (D) ENCLOSURE WIDTH mm (W) Height (H) 1200 Side Panel
Single Door Single Door Double Door Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)
STEP PRODUCT DESCRIPTION 600 800 1200
600 1200 500 706.125.011 706.125.111 706.125.211 706.125
1 TOP/BOTTOM GROUP 701.660 701.860 701.260
H 2 VERTICAL FRAMES GROUP 702.220 702.220 702.220 800 1200 500 708.125.011 708.125.111 708.125.211 706.125
3 PLINTH CORNER PART H100mm (H2) 708.100 708.100 708.100 1200 1200 500 712.125.011 712.125.111 712.125.211 706.125
3 PLINTH CORNER PART H200mm (H2) 708.200 708.200 708.200
H2 4 PLINTH FRONT COVERS H100mm (H2) 709.160 709.180 709.120
SOLID DOOR, without MOUNTING PLATE
5 PLINTH SIDE COVERS H100mm (H2) 710.160 710.160 710.160
6 REAR PANEL 703.622 703.822 703.222 Height (H) 1200 Side Panel
7 FRONT DOOR (SOLID) 724.622 724.822 724.222 Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)
8 SIDE PANELS (2 pcs) 706.226 706.226 706.226
600 1200 500 706.125.000 706.125.100 706.125.200 706.125
9 MOUNTING PLATE 707.622 707.822 707.222
10 BAYING KIT 711.000 711.000 711.000 800 1200 500 708.125.000 708.125.100 708.125.200 706.125
1200 1200 500 712.125.000 712.125.100 712.125.200 706.125

Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000

SOLID DOOR, MOUNTING PLATE

Height (H) 1600 Side Panel
Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)

600 1200 500 706.165.011 706.165.111 706.165.211 706.165

800 1200 500 708.165.011 708.165.111 708.165.211 706.165
1200 1200 500 712.165.011 712.165.111 712.165.211 706.165

SOLID DOOR, without MOUNTING PLATE

Height (H) 1600 Side Panel
Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)

600 1200 500 706.165.000 706.165.100 706.165.200 706.165

800 1200 500 708.165.000 708.165.100 708.165.200 706.165
1200 1200 500 712.165.000 712.165.100 712.165.200 706.165

Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000

54 55
SEISMIC
IP65
TESTED
 SIZES and MODELS (ASSEMBLED) SIZES and MODELS (ASSEMBLED)

Height (H) SOLID DOOR, SOLID DOOR, Height (H) SOLID DOOR, SOLID DOOR,
1800 MOUNTING PLATE without MOUNTING PLATE 2000 MOUNTING PLATE without MOUNTING PLATE
Width Depth H100 with H200 with H100 with H200 with Width Depth H100 with H200 with H100 with H200 with
Without Plinth Without Plinth Without Plinth Without Plinth
(W) (D) Plinth Plinth Plinth Plinth (W) (D) Plinth Plinth Plinth Plinth
400 500 704.185.011 704.185.111 704.185.211 704.185.000 704.185.100 704.185.200 400 500 704.205.011 704.205.111 704.205.211 704.205.000 704.205.100 704.205.200
400 600 704.186.011 704.186.111 704.186.211 704.186.000 704.186.100 704.186.200 400 600 704.206.011 704.206.111 704.206.211 704.206.000 704.206.100 704.206.200
600 400 706.184.011 706.184.111 706.184.211 706.184.000 706.184.100 706.184.200 400 800 704.208.011 704.208.111 704.208.211 704.208.000 704.208.100 704.208.200
600 500 706.185.011 706.185.111 706.185.211 706.185.000 706.185.100 706.185.200 600 400 706.204.011 706.204.111 706.204.211 706.204.000 706.204.100 706.204.200
600 600 706.186.011 706.186.111 706.186.211 706.186.000 706.186.100 706.186.200 600 500 706.205.011 706.205.111 706.205.211 706.205.000 706.205.100 706.205.200
800 400 708.184.011 708.184.111 708.184.211 708.184.000 708.184.100 708.184.200 600 600 706.206.011 706.206.111 706.206.211 706.206.000 706.206.100 706.206.200
800 500 708.185.011 708.185.111 708.185.211 708.185.000 708.185.100 708.185.200 600 800 706.208.011 706.208.111 706.208.211 706.208.000 706.208.100 706.208.200
800 600 708.186.011 708.186.111 708.186.211 708.186.000 708.186.100 708.186.200 600 1000 706.200.011 706.200.111 706.200.211 706.200.000 706.210.000 706.220.000

1000 400 710.184.011 710.184.111 710.184.211 710.184.000 710.184.100 710.184.200 700 400 707.204.011 707.204.111 707.204.211 707.204.000 707.204.100 707.204.200
1000 500 710.185.011 710.185.111 710.185.211 710.185.000 710.185.100 710.185.200 700 500 707.205.011 707.205.111 707.205.211 707.205.000 707.205.100 707.205.200
1000 600 710.186.011 710.186.111 710.186.211 710.186.000 710.186.100 710.186.200 700 600 707.206.011 707.206.111 707.206.211 707.206.000 707.206.100 707.206.200
700 800 707.208.011 707.208.111 707.208.211 707.208.000 707.208.100 707.208.200
1200 400 712.184.011 712.184.111 712.184.211 712.184.000 712.184.100 712.184.200
1200 500 712.185.011 712.185.111 712.185.211 712.185.000 712.185.100 712.185.200 800 400 708.204.011 708.204.111 708.204.211 708.204.000 708.204.100 708.204.200
1200 600 712.186.011 712.186.111 712.186.211 712.186.000 712.186.100 712.186.200 800 500 708.205.011 708.205.111 708.205.211 708.205.000 708.205.100 708.205.200
800 600 708.206.011 708.206.111 708.206.211 708.206.000 708.206.100 708.206.200
800 800 708.208.011 708.208.111 708.208.211 708.208.000 708.208.100 708.208.200
800 1000 708.200.011 708.200.111 708.200.211 708.200.000 708.210.000 708.220.000
1000 400 710.204.011 710.204.111 710.204.211 710.204.000 710.204.100 710.204.200
Height (H) GLAZED DOOR, GLAZED DOOR,
1000 500 710.205.011 710.205.111 710.205.211 710.205.000 710.205.100 710.205.200
1800 MOUNTING PLATE without MOUNTING PLATE
1000 600 710.206.011 710.206.111 710.206.211 710.206.000 710.206.100 710.206.200
Width Depth H100 with H200 with H100 with H200 with 1000 800 710.208.011 710.208.111 710.208.211 710.208.000 710.208.100 710.208.200
Without Plinth Without Plinth
(W) (D) Plinth Plinth Plinth Plinth
1200 400 712.204.011 712.204.111 712.204.211 712.204.000 712.204.100 712.204.200
600 400 776.184.011 776.184.111 776.184.211 776.184.000 776.184.100 776.184.200
1200 500 712.205.011 712.205.111 712.205.211 712.205.000 712.205.100 712.205.200
600 500 776.185.011 776.185.111 776.185.211 776.185.000 776.185.100 776.185.200
1200 600 712.206.011 712.206.111 712.206.211 712.206.000 712.206.100 712.206.200
600 600 776.186.011 776.186.111 776.186.211 776.186.000 776.186.100 776.186.200
1200 800 712.208.011 712.208.111 712.208.211 712.208.000 712.208.100 712.208.200
800 400 778.184.011 778.184.111 778.184.211 778.184.000 778.184.100 778.184.200
800 500 778.185.011 778.185.111 778.185.211 778.185.000 778.185.100 778.185.200
800 600 778.186.011 778.186.111 778.186.211 778.186.000 778.186.100 778.186.200 Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000

Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000

56 57
SEISMIC
IP65
TESTED
 SIZES and MODELS (ASSEMBLED) SIZES and MODELS (ASSEMBLED)

Height (H) GLAZED DOOR, GLAZED DOOR, SOLID DOOR, MOUNTING PLATE
Side
2000 MOUNTING PLATE Panel
without MOUNTING PLATE Height (H) 2200 Side Panel
Width Depth Without H100 with H200 with (2 pcs) Without H100 with H200 with Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)
(W) (D) Plinth Plinth Plinth Plinth Plinth Plinth
600 2200 600 706.226.011 706.226.111 706.165.211 706.226
600 400 776.204.011 776.204.111 776.204.211 706.204 776.204.000 776.204.100 776.204.200
800 2200 600 708.226.011 708.226.111 708.165.211 706.226
600 500 776.205.011 776.205.111 776.205.211 706.205 776.205.000 776.205.100 776.205.200
600 600 776.206.011 776.206.111 776.206.211 706.206 776.206.000 776.206.100 776.206.200 1200 2200 600 712.226.011 712.226.111 712.165.211 706.226
600 800 776.208.011 776.208.111 776.208.211 706.208 776.208.000 776.208.100 776.208.200
600 1000 776.200.011 776.200.111 776.200.211 706.200 776.200.000 776.210.000 776.220.000 SOLID DOOR, without MOUNTING PLATE

700 400 777.204.011 777.204.111 777.204.211 706.204 777.204.000 777.204.100 777.204.200 Height (H) 2200 Side Panel
700 500 777.205.011 777.205.111 777.205.211 706.205 777.205.000 777.205.100 777.205.200 Width (W) Height (H) Depth (D) Without Plinth H100 with Plinth H200 with Plinth (2 pcs)
700 600 777.206.011 777.206.111 777.206.211 706.206 777.206.000 777.206.100 777.206.200
600 2200 600 706.226.000 706.226.100 706.226.200 706.226
700 800 777.208.011 777.208.111 777.208.211 706.208 777.208.000 777.208.100 777.208.200
800 2200 600 708.226.000 708.226.100 708.226.200 706.226
800 400 778.204.011 778.204.111 778.204.211 706.204 778.204.000 778.204.100 778.204.200
1200 2200 600 712.226.000 712.226.100 712.226.200 706.226
800 500 778.205.011 778.205.111 778.205.211 706.205 778.205.000 778.205.100 778.205.200
800 600 778.206.011 778.206.111 778.206.211 706.206 778.206.000 778.206.100 778.206.200 Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
800 800 778.208.011 778.208.111 778.208.211 706.208 778.208.000 778.208.100 778.208.200 Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000
800 1000 778.200.011 778.200.111 778.200.211 706.200 778.200.000 778.210.100 778.210.200

Attention: : Mounting Plate thickness of the mounting plate is chosen as 3,00 mm as standard.
Required: : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 711.000

58 59
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE
FLOORSTANDING CABINET

INDUSTRIAL AUTOMATION

POWER DISTRIBUTION

60 61
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE

FRAME STRUCTURE EARTHING CONTINUITY IP PROTECTION and NEMA CATEGORIES

2 welded front-rear frames which made by Earthing continuity thanks to welded vertical and horizontal IP Protection related to EN 60 529 and NEMA 12 with IP 54 protection related to EN 60 529 and NEMA 1 without
1,50 mm material profiles gland plate assembling for both single and double door. gland plate assembling for both single and double door.
Semi-closed vertical and Width profiles Earthing continuity thanks to special design of fastener Using gasket for all door, rear door, side panel top cover Using gasket for all door, rear door, side panel top cover
Closed depth profiles between front-rear frames and depth profiles. etc. Due to this gasket,without any opreration, full isolation etc. Due to this gasket,without any opreration, full isolation
is provided between -40°C & +100°C is provided between -40°C & +100°C

FRONT DOOR and LOCKING SYSTEM

4 points locking and hinging system on the outside of the frame

Pull-push working system of swing handle
Modifiable insert system from cylinder inserts to other universal inserts like doublebit, square etc.
Perforated door stiffeners in largest positioning.

62 63
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
ASSEMBLING AND LOGISTICAL ADVANTAGES ASSEMBLING AND LOGISTICAL ADVANTAGES

ASSEMBLING STEP 1 ASSEMBLING STEP 2 MOUNTING PLATE SYSTEM

Neo Modular and Neo Monoblock frame system are same as Teos frame related with the internal dimensions.
Therefore Mounting plate system of Teos which includes 3mm thickness and 2mm thickness can adapte to
Neo Modular and Neo monoblock design.
ASSEMBLING STEP 3 ASSEMBLING STEP 4

PLINTH SYSTEM

Neo Modular and Neo monoblock frame system are same as Teos frame related with the bottom dimensions. Therefore
Offered as flat package, the NEO Modular system is designed for an easy mounting in minimal amount of time. It does not plinth system of TEOS which includes H100mm and H200mm version can adapte to Neo Modular and Neo monoblock
require angulation for body and can be mounted 15-20 min. by two person. design.

Offered as flat package, the NEO Modular system saves space during transportation and storage.

64 65
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

1 2 3 4 1 2 3 4

W D W D
H

H
H2

H2
5 6 7 8 5 6 7 8

STEP 1 – MAIN BODY GROUP STEP 2 – FRAME DEPTH PARTS

Material : Materials :
Welded frames : 1,50 mm Galvanized steel + RAL 7035 powder coated Depth parts : 1,50 mm Galvanized + RAL 7035
Front door.: 1,50 mm mild steel+ RAL 7035 powder coated
Rear Panel : 1,20 mm mild steel + RAL powder coated Supply includes :
4 pcs frame depth parts and required assembling parts
Supply includes :
2 pcs welded frame, 1 pcs front door, 1 pcs rear panel, lock-parts, hinges
and required assembling parts.

Note : There are 2 version in selection. Version 1 is solid design.

Version 2 is glazed door
Note : 1000W and 1200W width enclosures are double doors.

ENCLOSURE ENCLOSURE REFERENCE

REFERENCE NO.
DÜZ KAPI
SOLID DOOR DIMENSION DEPTH (D) NO.
Width VERSION 1 VERSION 2 400 620.400
HEIGHT (H)
(W) SOLID DOOR GLAZED DOOR 500 620.500
1200 600 616.121 600 620.600
1200 800 618.121 800 620.800
1600 600 616.161
1600 800 618.161
1800 600 616.181 616.182
1800 800 618.181 618.182
1800 1000 610.181
GLAZED
CAMLI DOOR
KAPI
105,3 GLASS SIZE 83,8
1800 1200 612.181
2000 400 614.201
60

2000 600 616.201 616.202

2000 700 617.201 617.202
2000 800 618.201 618.202
2000 1000 610.201
2000 1200 612.201
104

66 67
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

1 2 3 4 1 2 3 4

W D W D
H

H
H2

H2
5 6 7 8 5 6 7 8

STEP 3 – TOP COVER STEP 4 – PLINTH PARTS

The design of Neo frame is same as Teos frame bottom sizes. Thanks to this advantage, plinth parts
of Teos are avaible to assemble to NEO system.

Materials :
1,20 mm mild steel+ RAL 7035 powder coating
PLINTH CORNER PART PLINTH FRONT COVER PLINTH FRONT COVER
Supply includes :
1 pcs top cover and required assembling parts

ENCLOSURE DIMENSION ENCLOSURE DIMENSION Material : Material : Material :

REFERENCE Corner part : 2,00 mm galvanized 100 mm plinth front cover : 1,50 mm 100 mm plinth side cover : 1,50 mm
REFERENCE NO.
NO. steel + RAL 7012 powder coating galvanized steel + RAL 7012 powder galvanized steel + RAL 7012 powder
Width (W) DEPTH (D) Width (W) DEPTH (D)
Plastic panel : RAL 7012 ABS Plastic coating coating
400 500 624.500 800 400 628.400
Suplly includes :4 pcs 100 mm or Suplly includes 2 pcs 100 mm high Suplly includes 2 pcs 100 mm high
400 600 624.600 500 628.500
200 mm high plinth corner part, 4 pcs plinth corner part, 4 pcs platic panel plinth side part, 4 pcs platic panel
400 800 624.800 600 628.600 platic panel and mounting parts. and mounting parts. and mounting parts.
600 400 626.400 800 628.800
Required : 2 set of side plinth cover Required : 2 set of side plinth cover
600 500 626.500 1000 400 621.400 group for 200 mm height plints group for 200 mm height plints
600 600 626.600 500 621.500
TEOS PLINTH REFERENCE ENCLOSURE REFERENCE
600 800 626.800 600 621.600
HEIGHT (H2) NO. Width (W) NO. ENCLOSURE REFERENCE
700 400 627.400 800 621.800 DEPTH (D) NO.
100 708.100 400 709.140
700 500 627.500 1200 400 622.400 400 710.140
200 708.200 600 709.160
700 600 627.600 500 622.500 500 710.150
700 709.170
700 800 627.800 600 622.600 600 710.160
800 709.180
800 622.800 800 710.180
1000 709.100
1200 709.120

68 69
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

1 2 3 4 1 2 3 4

W D W D
H

H
H2

H2
5 6 7 8 5 6 7 8

STEP 5 – GLAND PLATE SYSTEM STEP 6 – MOUNTING PLATE (3 mm thickness)

Material : Material:
Plate holder: 1,50 mm galvanized steel + RAL 7035 powder coating 3,00 mm galvanized steel
Gland Plates : 1,50 mm galvanized steel
Supply includes :
Supply includes : 1 pcs mounting plate and assembling parts
2 pcs width plate holders, 2 pcs depth plate holders, 3 or 4 pcs gland
plates related with depth size
HEIGHT
Note : The design of Neo frame is same as Teos frame bottom sizes. WIDTH 1200 1600 1800 2000
Thanks to this advantage, plinth parts of Teos are avaible to 400 - - 707.418 707.420
600 707.612 707.616 707.618 707.620
700 - - - 707.720
800 707.812 707.816 707.818 707.820
1000 - - 707.018 707.020
1200 - - 707.218 707.220

ENCLOSURE DIMENSIONS ENCLOSURE DIMENSIONS

REFERENCE NO. REFERENCE NO.
WIDTH (W) DEPTH (D) WIDTH (W) DEPTH (D)
STEP 6 – MOUNTING PLATES (2 mm thickness)
400 500 634.500 800 400 638.400
600 634.600 500 638.500
Material:
800 634.800 600 638.600
2,00 mm galvanized steel
600 400 636.400 800 638.800
500 636.500 1000 400 631.400 Supply includes :
1 pcs mounting plate and assembling parts
600 636.600 500 631.500
800 636.800 600 631.600
700 400 637.400 800 631.800
700 500 637.500 1200 400 632.400
700 600 637.600 500 632.500 HEIGHT
700 800 637.800 600 632.600 WIDTH 1200 1600 1800 2000

800 632.800 400 - - 717.418 717.420

600 717.612 717.616 717.618 717.620
700 - - - 717.720
800 717.812 717.816 717.818 717.820

70 71
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

1 2 3 4 1 2 3 4

W D W D
H

H
H2

H2
5 6 7 8 5 6 7 8

STEP 7 – SIDE PANEL (2 pcs) STEP 8 – BAYING KIT

Supply includes :
Material: 2 pcs combination angles, 8 set M6 fasteners, 2 pcs adjustable
1,20 mm mild steel + RAL 7035 powder coating bracet, 5.6m insulation gasket and assembling parts
Supply includes : Reference No : 611.000
2 pcs side panel and assembling parts

ENCLOSURE DIMENSION
REFERENCE NO.
WIDTH (W) DEPTH (D)
1200 500 632.125
1600 500 632.165
1800 400 632.184
1800 500 632.185
1800 600 632.186
2000 400 632.204
2000 500 632.205 STEP 8 - EYEBOLTS (4 pcs)
2000 600 632.206
2000 800 632.208 Supply includes :
4 pcs M12 eyebolts Reference No : 612.000

Note : It is required for each cubic and combination panels.

This accessory is not included in standart package.

72 73
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (DISASSEMBLED)

HEIGHT (H): 1200 mm HEIGHT (H): 1800 mm

ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDTH mm (W) ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDTH mm (W)
Single Door Single Door Single Door Single Door Single Door Single Door
STEP PRODUCT DESCRIPTION 600 800 STEP PRODUCT DESCRIPTION 600 800 1000 1200
1 BODY GROUP 616.121 618.121 1 BODY GROUP 616.181 618.181 610.181 612.181
2 DEPTH PARTS 620.500 620.500 2 DEPTH PARTS 620.500 620.500 620.500 620.500
3 TOP COVER 626.500 628.500 3 TOP COVER 626.500 628.500 621.500 622.500
4(1) PLINTH CORNER H100(H2) 708.100 708.100 4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100
4(1) PLINTH CORNER H200(H2) 708.200 708.200 4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200
4(2) PLINTH FRONT COVER H100(H2) 709.160 709.180 4(2) PLINTH FRONT COVER H100(H2) 709.160 709.180 709.100 709.120
4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 710.150 710.150
5 GLAND PLATE SYSTEM 636.500 638.500 5 GLAND PLATE SYSTEM 636.500 638.500 631.500 632.500
6 MOUNTING PLATE 2,00mm 717.612 717.812 6 MOUNTING PLATE 2,00mm 717.618 717.818 * *
6 MOUNTING PLATE 3,00mm 707.612 707.812 6 MOUNTING PLATE 3,00mm 707.618 707.818 707.018 707.218
7 SIDE PANEL 632.125 632.125 7 SIDE PANEL 632.185 632.185 632.185 632.185
8(1) NEO BAYING KIT 611.000 611.000 8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000
8(2) EYEBOLT(4 pcs.) 612.000 612.000 8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000

HEIGHT (H): 1600 mm HEIGHT (H): 1800 mm

ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDTH mm (W) ENCLOSURE DEPTH 600 mm (D) ENCLOSURE WIDTH mm (W)
Single Door Single Door Single Door Single Door Single Door Single Door
STEP PRODUCT DESCRIPTION 600 800 STEP PRODUCT DESCRIPTION 600 800 1000 1200
1 BODY GROUP 616.161 618.161 1 BODY GROUP 616.181 618.181 610.181 612.181
2 DEPTH PARTS 620.500 620.500 2 DEPTH PARTS 620.600 620.600 620.600 620.600
3 TOP COVER 626.500 628.500 3 TOP COVER 626.600 628.600 621.600 622.600
4(1) PLINTH CORNER H100(H2) 708.100 708.100 4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100
4(1) PLINTH CORNER H200(H2) 708.200 708.200 4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200
4(2) PLINTH FRONT COVER H100(H2) 709.160 709.180 4(2) PLINTH FRONT COVER H100(H2) 709.160 709.180 709.100 709.120
4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 4(3) PLINTH SIDE COVER H100(H2) 710.160 710.160 710.160 710.160
5 GLAND PLATE SYSTEM 636.500 638.500 5 GLAND PLATE SYSTEM 636.600 638.600 631.600 632.600
6 MOUNTING PLATE 2,00mm 717.616 717.816 6 MOUNTING PLATE 2,00mm 717.618 717.818 * *
6 MOUNTING PLATE 3,00mm 707.616 707.816 6 MOUNTING PLATE 3,00mm 707.618 707.818 707.018 707.218
7 SIDE PANEL 632.165 632.165 7 SIDE PANEL 632.186 632.186 632.186 632.186
8(1) NEO BAYING KIT 611.000 611.000 8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000
8(2) EYEBOLT(4 pcs.) 612.000 612.000 8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000

HEIGHT (H): 1800 mm HEIGHT (H): 2000 mm

ENCLOSURE DEPTH 400 mm (D) ENCLOSURE WIDTH mm (W) ENCLOSURE DEPTH 400 mm (D) ENCLOSURE WIDTH mm (W)
Single Door Single Door Single Door Single Door Single Door Single Door Single Door Single Door Single Door Single Door
STEP PRODUCT DESCRIPTION 600 800 1000 1200 STEP PRODUCT DESCRIPTION 400 600 700 800 1000 1200
1 BODY GROUP 616.181 618.181 610.181 612.181 1 BODY GROUP * 616.201 617.201 618.201 610.201 612.201
2 DEPTH PARTS 620.400 620.400 620.400 620.400 2 DEPTH PARTS * 620.400 620.400 620.400 620.400 620.400
3 TOP COVER 626.400 628.400 621.400 622.400 3 TOP COVER * 626.400 627.400 628.400 621.400 622.400
4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100 4(1) PLINTH CORNER H100(H2) * 708.100 708.100 708.100 708.100 708.100
4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200 4(1) PLINTH CORNER H200(H2) * 708.200 708.200 708.200 708.200 708.200
4(2) PLINTH FRONT COVER H100(H2) 709.160 709.180 709.100 709.120 4(2) PLINTH FRONT COVER H100(H2) * 709.160 709.170 709.180 709.100 709.120
4(3) PLINTH SIDE COVER H100(H2) 710.140 710.140 710.140 710.140 4(3) PLINTH SIDE COVER H100(H2) * 710.140 710.140 710.140 710.140 710.140
5 GLAND PLATE SYSTEM 636.400 638.400 631.400 632.400 5 GLAND PLATE SYSTEM * 636.400 637.400 638.400 631.400 632.400
6 MOUNTING PLATE 2,00mm 717.618 717.818 * * 6 MOUNTING PLATE 2,00mm * 717.620 717.720 717.820 * *
6 MOUNTING PLATE 3,00mm 707.618 707.818 707.018 707.218 6 MOUNTING PLATE 3,00mm * 707.620 707.720 707.820 707.020 707.220
7 SIDE PANEL 632.184 632.184 632.184 632.184 7 SIDE PANEL * 632.204 632.204 632.204 632.204 632.204
8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000 8(1) NEO BAYING KIT * 611.000 611.000 611.000 611.000 611.000
8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000 8(2) EYEBOLT(4 pcs.) * 612.000 612.000 612.000 612.000 612.000

74 75
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (DISASSEMBLED) SIZES and MODELS (ASSEMBLED)

HEIGHT (H): 2000 mm

ENCLOSURE DEPTH 500 mm (D) ENCLOSURE WIDHT mm (W)
Single Door Single Door Single Door Single Door Double Door Double Door SOLID DOOR, MOUNTING PLATE
STEP PRODUCT DESCRIPTION 400 600 700 800 1000 1200
Height (H) 1200 Side Panel
1 BODY GROUP 614.201 616.201 617.201 618.201 610.201 612.201
2 DEPTH PARTS 620.500 620.500 620.500 620.500 620.500 620.500 WIDTH (W) HEIGHT(H) DEPTH(D) Without plinth H100 Plinth H200Plinth (2 pcs)
3 TOP COVER 624.500 626.500 627.500 628.500 621.500 622.500 600 1200 500 646.125.011 646.125.111 646.125.211 632.125
4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100 708.100 708.100
800 1200 500 648.125.011 648.125.111 648.125.211 632.125
4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200 708.200 708.200
4(2) PLINTH FRONT COVER H100(H2) 709.140 709.160 709.170 709.180 709.100 709.120
4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 710.150 710.150 710.150 710.150
5 GLAND PLATE SYSTEM 634.500 636.500 637.500 638.500 631.500 632.500 SOLID DOOR, without MOUNTING PLATE
6 MOUNTING PLATE 2,00mm * 717.620 717.720 717.820 * * Height (H) 1200 Side Panel
6 MOUNTING PLATE 3,00mm * 707.620 707.720 707.820 707.020 707.220 (2 pcs)
WIDTH (W) HEIGHT(H) DEPTH(D) Without plinth H100 Plinth H200Plinth
7 SIDE PANEL 632.205 632.205 632.205 632.205 632.205 632.205
8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000 611.000 611.000 600 1200 500 646.125.000 646.125.100 646.125.200 632.125
8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000 612.000 612.000 800 1200 500 648.125.000 648.125.100 648.125.200 632.125

HEIGHT (H): 2000 mm

!!! Attention : Mounting plate’s thickness is standard 2mm for 600W-800W, but; for 1000W-1200W chosen 3,00mm thickness.
ENCLOSURE DEPTH 600 mm (D) ENCLOSURE WIDHT mm (W) !! Required : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 611.000
Single Door Single Door Single Door Single Door Double Door Double Door !! Attention : If the carrier Eyebolt is required for each column in single column panels and for each combined system in combined systems.
STEP PRODUCT DESCRIPTION 400 600 700 800 1000 1200 Eyebolt(pcs) Referans No : 612.000

1 BODY GROUP 614.201 616.201 617.201 618.201 610.201 612.201

2 DEPTH PARTS 620.600 620.600 620.600 620.600 620.600 620.600
3 TOP COVER 624.600 626.600 627.600 628.600 621.600 622.600
4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100 708.100 708.100 SOLID DOOR, MOUNTING PLATE
4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200 708.200 708.200 Height (H) 1600 Side Panel
4(2) PLINTH FRONT COVER H100(H2) 709.140 709.160 709.170 709.180 709.100 709.120 (2 pcs)
WIDTH (W) HEIGHT(H) DEPTH(D) Without plinth H100 Plinth H200Plinth
4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 710.150 710.150 710.150 710.150
5 GLAND PLATE SYSTEM 634.600 636.600 637.600 638.600 631.600 632.600 600 1600 500 646.165.011 646.165.111 646.165.211 632.165
6 MOUNTING PLATE 2,00mm * 717.620 717.720 717.820 * * 800 1600 500 648.165.011 648.165.111 648.165.211 632.165
6 MOUNTING PLATE 3,00mm * 707.620 707.720 707.820 707.020 707.220
7 SIDE PANEL 632.206 632.206 632.206 632.206 632.206 632.206
8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000 611.000 611.000
SOLID DOOR, without MOUNTING PLATE
8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000 612.000 612.000
Height (H) 1600 Side Panel
HEIGHT (H): 2000 mm WIDTH (W) HEIGHT(H) DEPTH(D) Without plinth H100 Plinth H200Plinth (2 pcs)

ENCLOSURE DEPTH 800 mm (D) ENCLOSURE WIDHT mm (W) 600 1600 500 646.165.000 646.165.100 646.165.200 632.165
Single Door Single Door Single Door Single Door Single Door Single Door 800 1600 500 648.165.000 648.165.100 648.165.200 632.165
STEP PRODUCT DESCRIPTION 400 600 700 800 1000 1200
1 BODY GROUP 614.201 616.201 617.201 618.201 610.201 612.201
2 DEPTH PARTS 620.800 620.800 620.800 620.800 620.800 620.800 !!! Attention : Mounting plate’s thickness is standard 2mm for 400W-800W, but; for 1000W-1200W chosen 3,00mm thickness.
3 TOP COVER 624.800 626.800 627.800 628.800 621.800 622.800 !! Required : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 611.000
4(1) PLINTH CORNER H100(H2) 708.100 708.100 708.100 708.100 708.100 708.100 !! Attention : If the carrier Eyebolt is required for each column in single column panels and for each combined system in combined systems.
Eyebolt(pcs) Referans No : 612.000
4(1) PLINTH CORNER H200(H2) 708.200 708.200 708.200 708.200 708.200 708.200
4(2) PLINTH FRONT COVER H100(H2) 709.140 709.160 709.170 709.180 709.100 709.120
4(3) PLINTH SIDE COVER H100(H2) 710.150 710.150 710.150 710.150 710.150 710.150
5 GLAND PLATE SYSTEM 634.800 636.800 637.800 638.800 631.800 632.800
6 MOUNTING PLATE 2,00mm * 717.620 717.720 717.820 * *
6 MOUNTING PLATE 3,00mm * 707.620 707.720 707.820 707.020 707.220
7 SIDE PANEL 632.208 632.208 632.208 632.208 632.208 632.208
8(1) NEO BAYING KIT 611.000 611.000 611.000 611.000 611.000 611.000
8(2) EYEBOLT(4 pcs.) 612.000 612.000 612.000 612.000 612.000 612.000

76 77
SEISMIC
IP65
TESTED
 NEO MODULAR TYPE NEO MODULAR TYPE
SIZES and MODELS (ASSEMBLED) SIZES and MODELS (ASSEMBLED)

Height (H) SOLID DOOR, SOLID DOOR, Height (H) SOLID DOOR, SOLID DOOR,
Side Side
1800 MOUNTING PLATE Panel
without MOUNTING PLATE 2000 MOUNTING PLATE Panel
without MOUNTING PLATE
Width Depth Without H100 with H200 with (2 pcs) Without H100 with H200 with Width Depth Without H100 with H200 with (2 pcs) Without H100 with H200 with
(W) (D) Plinth Plinth Plinth Plinth Plinth Plinth (W) (D) Plinth Plinth Plinth Plinth Plinth Plinth
600 400 646.184.011 646.184.111 646.184.211 632.184 646.184.000 646.184.100 646.184.200 400 500 644.205.011 644.205.111 644.205.011 632.205 644.205.000 644.205.100 644.205.200
600 500 646.185.011 646.185.111 646.185.211 632.185 646.185.000 646.185.100 646.185.200 400 600 644.206.011 644.206.111 644.206.111 632.206 644.206.000 644.206.100 644.206.200
600 600 646.186.011 646.186.111 646.186.211 632.186 646.186.000 646.186.100 646.186.200 400 800 644.208.011 644.208.111 604.208.211 632.208 644.208.000 644.208.100 644.208.200
800 400 648.184.011 648.184.111 648.184.211 632.184 648.184.000 648.184.100 648.184.200 600 400 646.204.011 646.204.111 646.204.211 632.204 646.204.000 646.204.100 646.204.200
800 500 648.185.011 648.185.111 648.185.211 632.185 648.185.000 648.185.100 648.185.200 600 500 646.205.011 646.205.111 646.205.211 632.205 646.205.000 646.205.100 646.205.200
800 600 648.186.011 648.186.111 648.186.211 632.186 648.186.000 648.186.100 648.186.200 600 600 646.206.011 646.206.111 646.206.211 632.206 646.206.000 646.206.100 646.206.200
1000 400 640.184.011 640.184.111 640.184.211 632.184 640.184.000 640.184.100 640.184.200 600 800 646.208.011 646.208.111 646.208.211 632.208 646.208.000 646.208.100 646.208.200
1000 500 640.185.011 640.185.111 640.185.211 632.185 640.185.000 640.185.100 640.185.200 700 400 647.204.011 647.204.111 647.204.211 632.204 647.204.000 647.204.100 647.204.200
1000 600 640.186.011 640.186.111 640.186.211 632.186 640.186.000 640.186.100 640.186.200 700 500 647.205.011 647.205.111 647.205.211 632.205 647.205.000 647.205.100 647.205.200
1200 400 642.184.011 642.184.111 642.184.211 632.184 642.184.000 642.184.100 642.184.200 700 600 647.206.011 647.206.111 647.206.211 632.206 647.206.000 647.206.100 647.206.200
1200 500 642.185.011 642.185.111 642.185.211 632.185 642.185.000 642.185.100 642.185.200 700 800 647.208.011 647.208.111 647.208.211 632.208 647.208.000 647.208.100 647.208.200
1200 600 642.186.011 642.186.111 642.186.211 632.186 642.186.000 642.186.100 642.186.200 800 400 648.204.011 648.204.111 648.204.211 632.204 648.204.000 648.204.100 648.204.200
800 500 648.205.011 648.205.111 648.205.211 632.205 648.205.000 648.205.100 648.205.200
800 600 648.206.011 648.206.111 648.206.211 632.206 648.206.000 648.206.100 648.206.200
Height (H) GLAZED DOOR, GLAZED DOOR, 800 800 648.208.011 648.208.111 648.208.211 632.208 648.208.000 648.208.100 648.208.200
Side
1800 MOUNTING PLATE Panel
without MOUNTING PLATE 1000 400 640.204.011 640.204.111 640.204.211 632.204 640.204.000 640.204.100 640.204.200
(2 pcs) 1000 500 640.205.011 640.205.111 640.205.211 632.205 640.205.000 640.205.100 640.205.200
Width Depth Without H100 with H200 with Without H100 with H200 with
(W) (D) Plinth Plinth Plinth Plinth Plinth Plinth 1000 600 640.206.011 640.206.111 640.206.211 632.206 640.206.000 640.206.100 640.206.200
600 400 676.184.011 676.184.111 676.184.211 632.184 676.184.000 676.184.100 676.184.200 1000 800 640.208.011 640.208.111 640.208.211 632.208 640.208.000 640.208.100 640.208.200
600 500 676.185.011 676.185.111 676.185.211 632.185 676.185.000 676.185.100 676.185.200 1200 400 642.204.011 642.204.111 642.204.211 632.204 642.204.000 642.204.100 642.204.200
600 600 676.186.011 676.186.111 676.186.211 632.186 676.186.000 676.186.100 676.186.200 1200 500 642.205.011 642.205.111 642.205.211 632.205 642.205.000 642.205.100 642.205.200
800 400 678.184.011 678.184.111 678.184.211 632.184 678.184.000 678.184.100 678.184.200 1200 600 642.206.011 642.206.111 642.206.211 632.206 642.206.000 642.206.100 642.206.200
800 500 678.185.011 678.185.111 678.185.211 632.185 678.185.000 678.185.100 678.185.200 1200 800 642.208.011 642.208.111 642.208.211 632.208 642.208.000 642.208.100 642.208.200
800 600 678.186.011 678.186.111 678.186.211 632.186 678.186.000 678.186.100 678.186.200

Height (H) GLAZED DOOR, GLAZED DOOR,

Side
!!! Attention : Mounting plate’s thickness is standard 2mm for 400W-800W, but; for 1000W-1200W chosen 3,00mm thickness. 2000 MOUNTING PLATE Panel
without MOUNTING PLATE
!! Required : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 611.000
!! Attention : If the carrier Eyebolt is required for each column in single column panels and for each combined system in combined systems. Width Depth Without H100 with H200 with (2 pcs) Without H100 with H200 with
Eyebolt(pcs) Referans No : 612.000 (W) (D) Plinth Plinth Plinth Plinth Plinth Plinth
600 400 676.204.011 676.204.111 676.204.211 632.204 676.204.000 676.204.100 676.204.200
600 500 676.205.011 676.205.111 676.205.211 632.205 676.205.000 676.205.100 676.205.200
600 600 676.206.011 676.206.111 676.206.211 632.206 676.206.000 676.206.100 676.206.200
600 800 676.208.011 676.208.111 676.208.211 632.208 676.208.000 676.208.100 676.208.200
700 400 677.204.011 677.204.111 677.204.211 632.204 677.204.000 677.204.100 677.204.200
700 500 677.205.011 677.205.111 677.205.211 632.205 677.205.000 677.205.100 677.205.200
700 600 677.206.011 677.206.111 677.206.211 632.206 677.206.000 677.206.100 677.206.200
700 800 677.208.011 677.208.111 677.208.211 632.208 677.208.000 677.208.100 677.208.200
800 400 678.204.011 678.204.111 678.204.211 632.204 678.204.000 678.204.100 678.204.200
800 500 678.205.011 678.205.111 678.205.211 632.205 678.205.000 678.205.100 678.205.200
800 600 678.206.011 678.206.111 678.206.211 632.206 678.206.000 678.206.100 678.206.200
800 800 678.208.011 678.208.111 678.208.211 632.208 678.208.000 678.208.100 678.208.200

!!! Attention : Mounting plate’s thickness is standard 2mm for 400W-800W, but; for 1000W-1200W chosen 3,00mm thickness.
!! Required : For panel assembly, a baying kit is required for each baying point. Baying Kit Reference No: 611.000
!! Attention : If the carrier Eyebolt is required for each column in single column panels and for each combined system in combined systems.
Eyebolt(pcs) Referans No : 612.000
78 79
SEISMIC
IP65
TESTED
 NEO Mb MONOBLOCK
FLOORSTANDING CABINET

80 81
SEISMIC
IP65
TESTED
 NEO Mb MONOBLOCK NEO Mb MONOBLOCK

FRAME STRUCTURE EARTING CONTINUTIY

Fully welded frame made from 1.5 mm material On the inner surface of the front door, the grounding screws
Semi-closed height and width profiles On the top and bottom are increasing the conductive surface
Fully closed and fixed sides to provide grounding continuity.

IP PROTECTION AND NEMA CATEGORIES

For single doors; according to EN 60 529 resistance to water and dust in IP65 and NEMA 4 standards.
For double doors; according to EN 60 529 resistance to water and dust in IP 54 and NEMA12

Foam gaskets are used on all doors; such as front door, rear door, side panels and top panels.
This gasket provides full isolation between -40 °C and +100 °C without any application.

82 83
SEISMIC
IP65
TESTED
 NEO Mb MONOBLOCK NEO Mb MONOBLOCK
SIZES and MODELS (ASSEMBLED) SIZES and MODELS (ASSEMBLED)

SOLID DOOR, SOLID DOOR, SOLID DOOR, SOLID DOOR,

Height (H) 1200 MOUNTING PLATE without MOUNTING PLATE Height (H) 2000 MOUNTING PLATE without MOUNTING PLATE
Without Without Without Without
Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth
Plinth Plinth Plinth Plinth
600 400 656.124.011 656.124.111 656.124.211 656.124.000 656.124.100 656.124.200 600 400 656.204.011 656.204.111 656.204.211 656.204.000 656.204.100 656.204.200
800 400 658.124.011 658.124.111 658.124.211 658.124.000 658.124.100 658.124.200 800 400 658.204.011 658.204.111 658.204.211 658.204.000 658.204.100 658.204.200
800 500 658.205.011 658.205.111 658.205.211 658.205.000 658.205.100 658.205.200
800 600 658.206.011 658.206.111 658.206.211 658.206.000 658.206.100 658.206.200

1000 400 650.204.011 650.204.111 650.204.211 650.204.000 650.204.100 650.204.200

SOLID DOOR, SOLID DOOR, 1000 500 650.205.011 650.205.111 650.205.211 650.205.000 650.205.100 650.205.200
Height (H) 1600 MOUNTING PLATE without MOUNTING PLATE
1200 400 652.204.011 652.204.111 652.204.211 652.204.000 652.204.100 652.204.200
Without Without
Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth 1200 500 652.205.011 652.205.111 652.205.211 652.205.000 652.205.100 652.205.200
Plinth Plinth
1200 600 652.206.011 652.206.111 652.206.211 652.206.000 652.206.100 652.206.200
600 400 656.164.011 656.164.111 656.164.211 656.164.000 656.164.100 656.164.200
800 400 658.164.011 658.164.111 658.164.211 658.164.000 658.164.100 658.164.200
800 500 658.165.011 658.165.111 658.165.211 658.165.000 658.165.100 658.165.200

GLAZED DOOR, GLAZED DOOR,

Height (H) 2000 MOUNTING PLATE without MOUNTING PLATE
Without Without
Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth
SOLID DOOR, SOLID DOOR, Plinth Plinth
Height (H) 1800 MOUNTING PLATE without MOUNTING PLATE 600 400 666.204.011 666.204.111 666.204.211 666.204.000 666.204.100 666.204.200
Without Without
Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth 800 400 668.204.011 668.204.111 668.204.211 668.204.000 668.204.100 668.204.200
Plinth Plinth
600 400 656.184.011 656.184.111 656.184.211 656.184.000 656.184.100 656.184.200 800 500 668.205.011 668.205.111 668.205.211 668.205.000 668.205.100 668.205.200

800 400 658.184.011 658.184.111 658.184.211 658.184.000 658.184.100 658.184.200 800 600 668.206.011 668.206.111 668.206.211 668.206.000 668.206.100 668.206.200

800 500 658.185.011 658.185.111 658.185.211 658.185.000 658.185.100 658.185.200

!!!Attention : Mounting plates thicness’s chosed 2,00 mm for 600W-800W, for 1000W-1200W chosed 3,00mm thickness.

GLAZED DOOR, GLAZED DOOR,

Height (H) 1800 MOUNTING PLATE without MOUNTING PLATE
Without Without
Width(W) Depth (D) H100 Plinth H200 Plinth H100 Plinth H200 Plinth
Plinth Plinth
600 400 666.184.011 666.184.111 666.184.211 666.184.000 666.184.100 666.184.200
800 400 668.184.011 668.184.111 668.184.211 668.184.000 668.184.100 668.184.200
800 500 668.185.011 668.185.111 668.185.211 668.185.000 668.185.100 668.185.200

!!!Attention : Mounting plates thicness’s chosed 2,00 mm for 600W-800W, for 1000W-1200W chosed 3,00mm thickness.

84 85
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
PLINTH and PLINTH PARTS PLINTH and PLINTH PARTS

FIXED PLINTH
PLINTH CORNER PART Relevance : TEOS, NEO Modular
Material : 3,00 mm / galvanized steel + RAL 7012 coating
Relevance : TEOS, NEO Modular, NEO Mb
Supply includes : Plinth width : 2 pcs plinth and combination parts.
Related size : PLINTH HEIGHT Plinth depth : 2 pcs plinth and combination parts.
Materyal : Corner part : 2,00 mm galvanized steel + RAL 7012 powder-coating
Plastic Panel : RAL 7012 ABS Plastic Required : It is required M12x30 screw set for fixing (page 187)

Supply includes : 4 pcs 100 mm or 200 mm high plinth corner part,

4 pcs plastic panel and mounting parts Mounts the enclosures combined side-to-side on a single platform.
Enclosures are connected to the plinth via M12 perforations placed on the
Note : Please see page 86-87 for plinth accessories. combination corners.
It gives advantages in the lifting and forklift.
TEOS PLINTH REF.
HEIGHT (H2) NO. Enclosures can be mounted directly on the (standard) plinth.
100 708.100 Please refer to our sales department for the manufacturing schedule.
200 708.200

PLINTH REF. PLINTH REF.

WIDHT (W) NO. WIDHT (W) NO.
PLINTH FRONT COVERS PLINTH SIDE COVERS 1800 912.100 2900 912.111
1900 912.101 3000 912.112
2000 912.102 3100 912.113
2100 912.103 3200 912.114
2200 912.104 3300 912.115
2300 912.105 3400 912.116
2400 912.106 3500 912.117
2500 912.107 3600 912.118
2600 912.108 3700 912.119
2700 912.109 3800 912.120
2800 912.110 3900 912.121

PLINTH REF. PLINTH REF.

WIDHT (D) NO. WIDHT (W) NO.
400 912.133 4000 912.122
500 912.134 4100 912.123
Relevance : TEOS, NEO Modular, NEO Mb Relevance : TEOS, NEO Modular, NEO Mb 600 912.135 4200 912.124
Related size : ENCLOSURE WIDHT Related size : ENCLOSURE WIDHT 800 912.136 4300 912.125
4400 912.126
Materyal : 100 mm front plinth part: Materyal : 100 mm side plinth part:
1,50 mm galvanized steel + RAL 7012 powder-coating 1,50 mm galvanized steel + RAL 7012 powder-coating 4500 912.127
4600 912.128
4700 912.129
Supply includes : 2 pcs 100 mm front plinth part and Supply includes : 2 pcs 100 mm front plinth part and M12 LEVELING FEET 4800 912.130
mounting parts mounting parts
4900 912.131
5000 912.132
Required : 2 sets of front plinth panel group Required : 2 sets of front plinth panel group
for 200 mm height plinths for 200mm height plinths
EENCLOSURE REF. EENCLOSURE REF.
WIDHT (W) NO. WIDHT (D) NO. Relevance : TEOS, NEO Modular, NEO Mb
400 709.140 400 710.140 Supply includes : 4 pcs M12 Leveling Feet
600 709.160 500 710.150
700 709.170 600 710.160 Reference no : 995.510
800 709.180 800 710.180
1000 709.100 1000 710.100
1200 709.120

86 87
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
PLINTH and PLINTH PARTS ASSEMBLING and LIFTING PARTS

FOAM RUBBER CABLE ENTRY SYSTEM BAYING KIT

Relevance : TEOS, NEO Modular Relevance : TEOS
Related Size : ENCLOSURE WIDTH Materyal : 3,00 mm - 4,00 mm mild steel parts zinc coated + galvanized
Material : Polyurethane foam
Supply includes : Polyurethane foam, ENCLOSURE REF. Supply includes : 2 pcs combination angles, 4 pcs angular brackets,
combination profile and parts WIDTH (mm) NO. 2 pcs adjustable bracket, 4 pcs fixing bracket
400 923.400 5,60 insulation gasket and mounting parts
600 923.600
Note : 2 accessories per Reference No : 711.000
700 923.700
(1000mm and 1200mm wide)
foam entry system 800 923.800
1000 * 923.100
1200 * 923.120

BRUSHED CABLE ENTRY SYSTEM

Relevance : TEOS, NEO Modular
Related size : ENCLOSURE WIDTH
Material : ABS plastic
Supply includes : Strip brush, combination ENCLOSURE REF.
profile and parts WIDTH (mm) NO.
400 923.401
1-) 2x Combination angles. Reference no: 711.001 (2 pcs)
600 923.601
: 2 accessories per ( 1000mm
Note
and 1200mm wide) brush 700 923.701 2-) 4x Fixing bracket. Reference no: 711.002 (4 pcs)
entry system 800 923.801
1000 * 923.101 3-) 4x angular brackets. Reference no: 711.003 (4 pcs)
1200 * 923.121
4-) 2x adjustable bracket. Reference no: 711.004 (2 pcs)

5-) 5,60 m 10x3 gasket. Reference no: 992.100 (page 205)

CABLE CLAMP RAIL (CLIP-ON)

Relevance : TEOS, NEO Modular, NEO Mb ENCLOSURE REF.
Related size : ENCLOSURE WIDTH WIDTH (mm) NO.
Material : 2,00 mm mild steel + 400 998.400
zinc-plating 600 998.600
Supply includes : Cable bracket combination
profile and combination parts.
700 998.700 FIXING WALL RAIL
800 998.800
1000 998.100 Relevance : NEO Mb
1200 998.120
Material : 4,00 mm mild steel + RAL 7035 powder coating

Supply includes : 2 pcs rail and assembling parts

BRUSHED CABLE ENTRY SYSTEM

Attention : The wall fixing option is only available for 1200-height panels.
Relevance : NEO Mb ENCLOSURE REF. It can be used as wall support with base in other height panels.
Related size : ENCLOSURE WIDTH WIDTH (mm) NO.
Material : 2,00 mm mild steel + 600 923.602 ENCLOSURE REF.
zinc-plating 800 923.802
Supply includes : Cable bracket combination WIDTH (mm) NO.
1000 923.102 600 972.600
profile and combination parts.
1200 923.122 800 972.800
1000 972.100
1200 972.120
88 89
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
ASSEMBLING and LIFTING PARTS MOUNTING RAIL and MOUNTING PLATE

TOP ANGLE IRON COMBINATION INTERMEDIATE MOUNTING PLATE

Relevance : TEOS
Relevance : TEOS, NEO Modular
Material : 60x60 mm x 5 mm + RAL 7012 coating
Supply includes : 2 length angle bending Related size : ENCLOSURE WIDTH

Required : 4 pcs M12x30 screw set is required for each enclosure. Material : 2,00 mm galvanized steel

Supply includes : 1 pcs mounting plate, 3 pcs bracket and assembling parts.
This connection type is particularly used for heavy enclosure combination
and support applications. Do the supporting in accordance with supporting
instructions. ENCLOSURE WIDTH(mm) REFERENCE NO.
1200 712.120
Please refer to our sales department for the manufacturing schedule.
1600 712.160
1800 712.180
ANGLE BRACKET REF. ANGLE BRACKET REF. ANGLE BRACKET REF. 2000 712.200
WIDTH(mm) NO. WIDTH(mm) NO. WIDTH(mm) NO. 2200 712.220
1800 912.137 2900 912.148 4000 912.159
1900 912.138 3000 912.149 4100 912.160
2000 912.139 3100 912.150 4200 912.161
2100 912.140 3200 912.151 4300 912.162
2200 912.141 3300 912.152 4400 912.163
2300 912.142 3400 912.153 4500 912.164
2400 912.143 3500 912.154 4600 912.165
2500 912.144 3600 912.155 4700 912.166 MOUNTING PLATE FOR CORNER EXTENSION
2600 912.145 3700 912.156 4800 912.167
2700 912.146 3800 912.157 4900 912.168
Relevance : TEOS, NEO Modular
2800 912.147 3900 912.158 5000 912.169
Material : 2,00 mm galvanized steel

Supply includes : 2 pcs extension part and assembling parts

CORNER ENCLOSURE
Relevance : TEOS ENCLOSURE HEIGHT(H) REFERENCE NO.
Designed for enclosures when enclosures are combined as an L. Door 1200 712.121
opening has been increased by means of door suspending adapter. 1600 712.161
1800 712.181
Use the table below for corner enclosure options. Bottom-top plinth 2000 712.201
frame and vertical frame group are standard. Only the panel set and
2200 712.221
adapter group is chosen in accordance with enclosure depth.

Inner enclosure applications and panel combination parts can be

applied as standard.
SHORT MOUNTING PLATE APPLICATION
Relevance : TEOS, NEO Modular, NEO Mb
HEIGHT DEPTH REFERENCE Depth rails allow for use of shorter mounting plates inside the
(H) (D) NO. enclosure. Thereby, this allows for busbar support and busbar
ADAPTER PART applications on the mounting plate.
1800 600 933.000
Each mounting plate needs 2 pcs depth rails and 4 pcs brackets.
800 933.001
Please see page 94-96 for related products.
2000 600 933.002
800 933.003 Please see page 138-159 for busbar support needs.
PANEL SET (2 PCS PANELS)
1800 600 933.004
Attention : There is no inconvenience in using intermediate mounting
800 933.005
plates and corner extension parts for short mounting
2000 600 933.006 plate applications. It can move front to back with
800 933.007 these accessories

90 91
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
MOUNTING RAIL and MOUNTING PLATE MOUNTING RAIL and MOUNTING PLATE

2
PARTIAL MOUNTING PLATE

Relevance : TEOS, NEO Modular, NEO Mb 1

Material : 2,00 mm galvanized steel.

Supply includes : 1 pcs. mounting plate 1 SCISSLE RAIL (pg. 94)

50 x25 Perforated structure
3
Required : 4 pcs plug-in rail bracket required for mounting
the mounting plate. Page 96
Reference number: 944.420 (100 pcs.) (Screws included)
944.421 (12 pcs.) (Screws included)

5
ENCLOSURE PLATE NET PLATE NET PACKS REFERENCE
WIDTH(W) WIDTH(mm) HEIGHT(mm) OF NO. 2 HEAVY EQUIPMENT PROFILE
400 295 150 1 944.442 (pg. 95)
400 295 175 1 944.443
400 295 200 1 944.444
400 295 250 1 944.445 4
400 295 300 1 944.446
400 295 400 1 944.447
400 295 500 1 944.448
400 295 600 1 944.449
500 395 400 1 944.450
3 PLUG IN RAIL BRACKET (pg. 96)
600 495 150 1 944.451
600 495 175 1 944.452
600 495 200 1 944.453
600 495 250 1 944.454
600 495 300 1 944.455
600 495 400 1 944.456
Application on MCCB kit, page 99 600 495 500 1 944.457
4
600 495 600 1 944.458
700 595 150 1 944.459 3
700 595 175 1 944.460 4 ADJUSTABLE RAIL BRACET
700 595 200 1 944.461 5
(pg. 97)
700 595 250 1 944.462
700 595 300 1 944.463
700 595 400 1 944.464
700 595 500 1 944.465
700 595 600 1 944.466
800 695 150 1 944.467
800 695 175 1 944.468
800 695 200 1 944.469
800 695 250 1 944.470
5 ADJUSTABLE RAIL BRACET
800 695 300 1 944.471 (pg. 98)
800 695 400 1 944.472
800 695 500 1 944.473 In terms of both width and interior depth size, TEOS
Application on enclosure frame 800 695 600 1 944.474 body structure is designed at the same coefficient
1000 895 175 1 944.475 rate. The complete structure inside the body is
1000 895 200 1 944.476 designed at the 25mm coefficient. Thus, the width rail
can also be installed on the depth rail.
1000 895 250 1 944.477

92 93
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
MOUNTING RAIL and MOUNTING PLATE MOUNTING RAIL and MOUNTING PLATE

SCISSILE RAIL SYSTEM (50x25 cross-section) HEAVY EQUIPMENT PROFILE

Relevance : TEOS, NEO Modular, NEO Mb Relevance : TEOS, NEO Modular, NEO Mb
Material : 2.00 mm Mild steel + zinc coated Material : 3 mm Mild steel + zinc coated

Supply includes : In product pack there is only rail included. Please be check Supply includes : 2 pcs rail and assembly screws
quantities of rails in pack on sheet below
Used for mounting heavy equipments such as base
Required : There is brackets required to assemble rail. mounting MCCB and transformer.
Please see page 96-98

ENCLOSURE RAIL NET PACKS REFERENCE

WIDTH(W) LENGTH (mm) OF NO.
Cut -off point 400 360 2 998.540
600 560 2 998.560
It is designed for assembling electrical
700 660 2 998.570
equipments into the enclosure. It is given
advantages for assembling in 3D every 800 760 2 998.580
directions. 1000 960 2 998.510

It is produced from 2 mm sheet thickness, thanks

to this advantage and with bended structure it
gives force.

There is standard sizes, also the rail can cut to

adjust required dimension.

The rail coated zinc after production. Thanks to

this coating all cutted edges protected against
corrosion.

To see using styles of rail,

please see page 96-101 Heavy Equipment application
on base
Required : It is required to fixing on
frame, 4 pcs of M6 hide nut.
Page 113

ENCLOSURE RAIL NET PACKS REFERENCE Heavy Equipment application

DEPTH (D) LENGTH (mm) OF NO. on rails
ENCLOSURE WIDTH (W) 400 291 2 944.422
ENCLOSURE WIDTH (W) 500 391 2 944.423
ENCLOSURE WIDTH (W) 600 491 2 944.424
ENCLOSURE WIDTH (W) 700 591 2 944.432
ENCLOSURE WIDTH (W) 800 691 2 944.425
ENCLOSURE WIDTH (W) 1000 891 2 944.426 Application with adjustable
ENCLOSURE HEIGHT (H) 1200 1091 2 944.427 flat busbar support
ENCLOSURE HEIGHT (H) 1600 1491 2 944.428
ENCLOSURE HEIGHT (H) 1800 1691 2 944.429 Required : It is required to fixing on
frame, 4 pcs of M6 hide nut.
ENCLOSURE HEIGHT (H) 2000 1891 4 944.430
Page 113
ENCLOSURE HEIGHT (H) 2200 2091 4 944.431

94 95
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
MOUNTING RAIL and MOUNTING PLATE MOUNTING RAIL and MOUNTING PLATE

PLUG-IN RAIL BRACKET ADJUSTABLE RAIL BRACKET (TYPE T)

Relevance : TEOS, NEO Modular, NEO Mb Relevance : TEOS, NEO Modular, NEO Mb

Material : 2 mm mild steel + zinc coated Material : 2 mm mild steel + zinc coated

Reference number : 944.421 (12 pcs.) (Screws included) reference number : 944.433 (4 pcs) ( screws included)
944.420 (100 pcs.) (Screws included)
Used for mounting the scissile rail on the enclosure body.

Thanks to this bracket, the enclosure body can be mounted, and the Its slot perforations provides the profile with a 25mm axis movement.
scissile rail can be mounted on the enclosure body. It holds tightly on
the enclosure body thanks to its fitting hook. The low relief on the front The rail is able to reciprocate in vertical position. Thanks to this, the
surface allows for a strong profile hold on the bracket and removes the equipments mounted on the rail can be aligned to the inner panel
weight off the bolt. position.

Recommended for profile mounting on the body. The busbar support is used to fix the top part on the body when the
rail is depth-combined on the body. See page 141
Moves on the profile or body at 25,00mm long steps.
The bulge placed on the combination part of the bracket and the rail
holds the rail weight and takes the load off the screw.

25mm movement ability on

the axis

Frame width and depth combination Vertical frame combination

Depth combination on the frame Combination on the top frame

Frame top combination Frame bottom combination

Vertical combination on the Vertical combination on the rail Width combination on the rail
Vertical rail combination Rail width combination (horizontal) Mounting plate combination frame (vertical)

96 97
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
MOUNTING RAIL and MOUNTING PLATE MOUNTING RAIL and MOUNTING PLATE

25A - 630A MCCB KIT (TEOS, NEO Modular, NEO Mb)

ADJUSTABLE RAIL BRACKET (TYPE L)
4x Kit Bracket
Relevance : TEOS, NEO Modular, NEO Mb
Material : 2 mm mild steel + zinc coated
Material : 2 mm mild steel + zinc coated
Reference number : 944.436 (2 pcs.) (Screws included)
Reference number : 944.434 (4 pcs) (screws included)
4 x Plug-in Rail Bracket

Reference number : 944.420 (100 pcs.) (Screws included)

Used for mounting the scissile rail on the enclosure body.
944.421 (12 pcs) (Screws included)
Its slot perforations provides the profile with a 25mm axis movement
2x Scissile Width Rail
It is possible to adjust the equipment on the rail placed in the width
position according to the inner panel.
ENCLOSURE RAIL NET PACKS REFERENCE
WIDTH(W) LENGTH (mm) OF NO.
Positions the rail vertically on the enclosure and allows for busbar
support mounting. See page 141 400 291 2 944.422
600 491 2 944.424

700 591 2 944.432
800 691 2 944.425
25mm movement ability
on the axis

1x Part Mounting Plate

This is the kit which enables compact MCCB (from lowest upto 630
Amperes) mounting.

As mounted from the front part of the enclosure, it makes it possible

for a copper busbar installation by creating space at the back of the
enclosure

Enables strong mounting with the plug-in rail bracket, and 7,00mm
reciprocating motion ability.

Offers a more economical solution as it eliminates the use of an entire

depth rail.

It is accord with cover plate.

Width combination on the rail Frame depth combination

Frame top combination Frame bottom combination

(vertical) (vertical)

98 99
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
MOUNTING RAIL and MOUNTING PLATE MOUNTING RAIL and MOUNTING PLATE

MCB AND TERMINAL KIT (BACK-MOUNTED CABLE DUCT) MCB KIT (FRONT-MOUNTED CABLE DUCT)
Relevance : TEOS, NEO Modular, NEO Mb Relevance : TEOS, NEO Modular, NEO Mb

2x Kit Bracket 2x MCB kit:

Material : 2 mm mild steel + zinc coated Material : 2 mm mild steel + zinc coated
Reference number : 944.436 (2 pcs.) (Screws included) Reference number : 944.478 (2 pcs.) (Screws included)

2x Plug-in rail bracket 1x Scissile width MCB rail.

Reference number : 944.420 (100 pcs.) (Screws included)

944.421 (12 pcs.) (Screws included) ENCLOSURE RAIL NET PACKS REFERENCE
WIDTH(W) LENGTH (mm) OF NO.
600 341 1 944.439
1x scissile width rail 700 441 1 944.440
800 541 1 944.441
ENCLOSURE RAIL NET PACKS REFERENCE
WIDTH(W) LENGTH (mm) OF NO.
400 291 2 944.422
2x duct bracket
600 491 2 944.424
700 591 2 944.432 Material : 2 mm mild steel + zinc coated
800 691 2 944.425 Reference number : 944.437 (12 pcs.) (Screws included)

1x terminal / MCB rail H7,5 mm (2 meters) 1x terminal / MCB rail H7,5 mm (2 meters)

Reference number : 990.102 (1 pcs.) Reference number : 990.102 (1 pcs.)

3x duct bracket
Mounts the MCBs on the front enclosure body without depth rails.
Material : 2 mm mild steel + zinc coated
Reference number : 944.437 (12 pcs.) (Screws included) Cable ducts can be connected from the front for MCB mountings.

Suitable size: 60x60mm for vertical cables and 40x60mm for

horizontal cable duct layings
Mounts MCBs and terminals on the front enclosure panel without
depth profiles. Maximum number of MCBs on the mounting rail:

Enables to connect cable ducts from the rear for MCB mountings and Enclosure Width MCB Capacity
mount a maximum number of MCBs.
400 5
Suitable size: 60x60mm for vertical ducts and 40x60mm for horizontal 600 16
cable duct layings 700 22
800 27
Mounted on the enclosure body, the mounting kits are designed with
7,00mm stepping perforations and enable mounting both on the
MCBs and the terminal boxes.

Maximum number of MCBs on the mounting rail:

Enclosure Width MCB Capacity

400 10
600 22
700 28
800 34

100 101
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
SHELF and INTERIOR PARTS SHELF and INTERIOR PARTS

Relevance : TEOS
DIVIDING PANEL FIXED and MOVABLE SHELF
Material : 1,5 mm Galvanised + RAL 7035 coating

Supply includes : 1 pcs panel and assembling parts.

Relevance : TEOS, NEO Modular, NEO Mb
Used for separating enclosures and mounting applications. Material : 1,50 mm mild steel+RAL 7035 coating

Supply includes : 1 pcs shelf and combination parts.

It may be used with Rails.

Rails are reqiured of usage.

TEOS ENCLOSURE mm TEOS ENCLOSURE mm
HEIGHT DEPTH REFERANS HEIGHT DEPTH REFERANS
(H) (D) NO. (H) (D) NO.
1800 400 935.001 2000 400 935.005
1800 500 935.002 2000 500 935.006
1800 600 935.003 2000 600 935.007 ENCLOSURE ENCLOSURE
1800 800 935.004 2000 800 935.008
WIDTH DEPTH REFERANS WIDTH DEPTH REFERANS
2200 600 935.009 (W) (D) NO. (W) (D) NO.
FIXED SHELF IN FULL SIZE FIXED SHELF IN FULL SIZE
600 600 945.200 800 600 945.202
800 945.201 800 945.203
MOVABLE SHELF IN FULL SIZE MOVABLE SHELF IN FULL SIZE
600 600 945.400 800 600 945.402
800 945.401 800 945.403
FIXED SHELF IN 19” SYSTEM
600 945.204
800 945.205
MOVABLE SHELF IN 19” SYSTEM
600 945.404
800 945.405

102 103
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
SHELF and INTERIOR PARTS SHELF and INTERIOR PARTS

DOOR RAIL FOR CABLE DUCT LAMP RAIL

Relevance : TEOS, NEO Modular, NEO Mb

Related size : ENCLOSURE WIDTH

Relevance : TEOS
Material : 2,00 mm mild steel + zinc-coated
Related size : ENCLOSURE WIDTH
Supply includes : 1 pcs door rail and assembling parts.
Material : 2,00 mm mild steel + zinc-coated
Attention Note : 2 pcs of door channel profile accessory needed for
800 mm, 1000 mm and 1200mm wide double doors. Supply includes : 1 pcs lamp bracket rail and assembling parts

ENCLOSURE WIDTH(mm) REFERENCE NO.

Single Door 400 997.104 ENCLOSURE WIDTH(mm) REFERENCE NO.
Single Door 600 997.113 400 903.204
Single Door 700 997.116 600 903.206
Single Door 800 997.114
700 903.207
Double Door 800 997.118
Single Door 1000 997.111 800 903.208
Double Door 1000 997.115 1000 903.210
Double Door 1200 997.112 1200 903.212

METAL PLAN POCKET

Relevance : TEOS, NEO Modular, NEO Mb

Related size : ENCLOSURE WIDTH

Material : 1,50 mm mild steel + RAL 7035 powder-coating
Supply includes : 1 pcs metal plan pocket and assembling parts SWITCH BRACKET

ENCLOSURE WIDTH(mm) REFERENCE NO.

Single Door 400 994.704 Relevance : TEOS, NEO Modular, NEO Mb
Single Door 600 994.706
Single Door 700 994.707 Material : 2,00 mm mild steel + zinc-coated
Single Door 800 994.708
Double Door 800 994.718 Supply includes : 1 pcs switch bracket and assembling parts
Single Door 1000 994.711
Double Door 1000 994.710 Reference No : 903.300 TEOS Door Stopper(Right)
Double Door 1200 994.712

DOOR STOPPER

Relevance : TEOS, NEO Modular, NEO Mb

It is using for angle limitation door.

Reference No : 905.202 (Right)

: 905.203 (Left)

104 105
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
INTERIOR COVER PLATE INTERIOR COVER PLATE

TEOS AND NEO COVER PLATE FRAME SET

INTERIOR COVER PLATE SYSTEM
Relevance : TEOS, NEO Modular, NEO Mb
For covering off the electrical equipment from the front of enclosure Material : 1,50 mm mild steel + RAL 7035 coating

It is modular structure and can be selected as whole or partly. Supply includes : 2 pcs vertical profile, 2 pcs bottom-top closer,
2 pcs bottom-top cover plate, 4 pcs cable protection
Partial covers are with hinges and assembly parts.

Attention : You can find the size of the vertical inner panel profile in the
drawing and table. Cover plate sizes will be determined
according to this size

COVER FRAME
ENCLOSURE ENCLOSURE REFERENCE
NET HEIGHT
WIDTH(W) HEIGHT(H) NO.
(H1)(mm)
400 1800 1600 953.401
400 2000 1800 953.402

600 1200 1000 953.403

600 1600 1400 953.404
600 1800 1600 953.405
600 2000 1800 953.406

700 2000 1800 953.408

800 1200 1000 953.409

800 1600 1400 953.410
800 1800 1600 953.411
800 2000 1800 953.412

H1
106 107
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
INTERIOR COVER PLATE INTERIOR COVER PLATE

COVER PLATE PARTIAL COVER PLATE

Relevance : TEOS, NEO Modular, NEO Mb ENCLOSURE PLATE NET PLATE NET
MCB QTY REF. NO.
WIDTH (W) WIDTH (W1) HEIGHT (H1)
Material : 1,50 mm mild steel + RAL 7035 coating
400 273 50 - 953.413
Supply includes : 1 pcs cover plate and mounting parts 100 - 953.414
150 - 953.415
150 W 12 953.416
200 - 953.417
Important : The usable size of the inner lid length profile (inner lidnet height H1)
200 W 12 953.418
is shown in the drawing and on the table. The inner lid will be
determined according to this measure. 250 - 953.419
300 - 953.420
Necessary : To fix the interior cover plate, the appropriate interior cover 300 W 12 953.421
frame set is required for the board size. See page 107 350 - 953.422
400 - 953.423
500 - 953.424
600 - 953.425
600 473 50 - 953.426
INTERIOR 100 - 953.427
ENCLOUSURE
ENCLOSURE PLATE NET COVER
NET HEIGHT REF. NO. 150 - 953.428
WIDTH (W) HEIGHT (H1) PLATE NET
(W1) 150 W 24 953.429
HEIGHT
200 - 953.430
400 1800 273 1597 713.418 Relevance : TEOS, NEO Modular, NEO Mb 200 W 24 953.431
400 2000 273 1797 713.420 Material :1,50 mm mild steel, RAL 7035 250 953.432
300 - 953.433
600 1200 473 997 713.612 Supply includes : 300 W 24 953.434
1 pcs cover plate and assembling parts 350 - 953.435
600 1600 473 1397 713.616
400 - 953.436
600 1800 473 1597 713.618 Necessary : To fix the interior cover
plate, the appropriate interior cover frame set 500 - 953.437
600 2000 473 1797 713.620 is required for the board size. See page 107 600 - 953.438
700 573 50 - 953.439
700 2000 573 1797 713.720
100 - 953.440
800 1200 673 997 713.812 150 - 953.441
800 1600 673 1397 713.816 150 W 30 953.442
63 24,2 200 - 953.443
800 1800 673 1597 713.818
200 W 30 953.444
800 2000 673 1797 713.820 250 - 953.445
300 - 953.446
300 W 30 953.447
84,3 350 953.448
400 - 953.449
H1

500 - 953.450
600 - 953.451
800 673 50 - 953.452
100 - 953.453
150 - 953.454
150 W 36 953.455
200 - 953.456
200 W 36 953.457
250 - 953.458
W1

300 - 953.459
300 W 36 953.460
350 - 953.461
400 - 953.462
500 - 953.463
600 - 953.464
108 109
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
PARTIAL DOOR SYSTEM PARTIAL DOOR SYSTEM

PARTIAL FRONT DOOR PARTIAL FIX PANEL(TOP)

Fix top panel

Partial door

Relevance : TEOS Relevance : TEOS

Material : 1,50 mm mild steel+ RAL 7035 Material : 1,50 mm mild steel+ RAL 7035
Fix bottom panel Supply includes : 1 pcs partial door, Supply includes: 1 pcs partial fix panel,
1 piece door splitting profile and fittings. 1 piece tac profile,
1 piece door splitting profile and fittings.
ENCLOSURE DOOR
Ref. No
WIDTH (W) HEIGHT
400 150 853.415 PARTIAL FIX PANEL(BOTTOM)
200 853.420
250 853.425
300 853.430
350 853.435
ENCLOSURE AVAILABLE NOMINAL 400 853.440
HEIGHT (H) HEIGHT (H1) 450 853.445
500 853.450
1200 1100
600 853.460
1600 1500 800 853.480
1800 1700 1000 853.410
600 150 853.615
2000 1900
200 853.620
2200 2100 250 853.625
300 853.630
350 853.635
400 853.640 Relevance : TEOS
Important : 1 piece of fixed top cover and 1 piece of fixed 450 853.645
Material : 1,50 mm mild steel+ RAL 7035
bottom cover shall be chosen for each enclosure. 500 853.650 Supply includes : 1 pcs partial fix panel and assembling parts.
600 853.660
H1 Important : The sum of the door heights must match the 800 853.680
available nominal height (H1). 1000 853.610 TOP BOTTOM
800 150 853.815 ENCLOSURE DOOR
PANEL PANEL
Width(W) HEIGHT
200 853.820 Ref. No Ref. No
250 853.825 400 100 854.410 855.410
300 853.830 400 200 854.420 855.420
350 853.835 600 100 854.610 855.610
400 853.840 600 200 854.620 855.620
450 853.845 800 100 854.810 855.810
500 853.850 800 200 854.820 855.820
600 853.860
800 853.880
1000 853.810
110 111
SEISMIC
IP65
TESTED
 ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET ASSEMBLY SUPPORT PRODUCT for FLOORSTANDING CABINET
19” MOUNTING SYSTEM MOUNTING ACCESORIES

19’’ COMBINATION PROFILES KNITTED EARTHING CABLE

Relevance : TEOS, NEO Modular, NEO Mb
Material : Copper-+tin-plating
Material : 2,00 mm mild steel+ zinc-plating
Supply includes : 5 pcs cable and screws
Supply includes : 4 pcs profile and combination screws
Reference No : 991.202 (5 pcs)
Required : 6 pcs scissile rail for 600mm width enclosure applications
on depth side of enclosure. In 800 mm width enclosures,
6 pcs 800 mm width adapter requires. See page 112

ENCLOSURE HEIGHT(H) UNIT U REFERENCE NO.

1200 24 944.930 M6 HIDE NUT
1600 33 944.931
2000 42 944.932
Relevance : TEOS, NEO Modular, NEO Mb
Necessary for installing the support and mounting rails on the enclosure.
Installed from square perforations placed on the front surface of closed
800 mm WIDTH ADAPTER (19”) profiles.

Relevance : TEOS, NEO Modular, NEO Mb Reference No : 994.170 (100 pcs packs)
994.171 (10 pcs packs)
Material : 2,00 mm mild steel+ zinc-plating

Supply includes : 6 pcs adapter and assembling parts.

PULL-PUSH LOCKING
Reference No : Enclosure depth: 600 mm: 944.933
Enclosure depth: 800 mm: 944.934
HANDLE & INSERTS
Relevance : TEOS
Reference no :
Pull-Push Locking Handle with 5333 insert : 950.103
Insert Doublebit 5,00mm : 950.250
Insert Triangle 9,00mm : 950.252
Insert Square 8,00mm : 950.251
Necessary : In the case of selecting of the other lock insrets
19’’ SWING FRAME (Doublebit , Triangle and Square),
the corresponding key must also be selected.

Relevance : TEOS, NEO Modular, NEO Mb

PULL-PUSH LOCKING
Material : 2,00 mm mild steel + RAL 7035 coating
Supply includes : 1 set of swing frame
HANDLE & INSERTS
(lock-hinges included) Relevance : NEO Modular, NEO Mb
Reference no :
TEOS ENCLOSURE Pull-Push Locking Handle with 5333 insert : 950.117
WIDTH HEIGHT UNIT REFERANS Pull-Push Locking Handle (PAD LOCK) with 5333 insert : 951.214
(W) (H) U NO. Insert Doublebit 5,00mm : 950.110
Insert Triangle 9,00mm : 950.115
600 1200 22 944.935
Insert Square 8,00mm : 950.116
1600 31 944.936 Necessary : In the case of selecting of the other lock insrets
1800 36 944.937 (Doublebit , Triangle and Square),
2000 40 944.938 the corresponding key must also be selected.
2200 45 944.939

TEOS ENCLOSURE
KEYS
WIDTH HEIGHT UNIT REFERANS
(W) (H) U NO. Reference no :
Doublebit Key 5,00mm : 952.101
800 1200 22 944.940 Triangle Key 9,00mm : 950.103
1600 31 944.941 Square Key 8,00mm : 950.102
1800 36 944.942
2000 40 944.943
2200 45 944.944
112 113
SEISMIC
IP65
TESTED
 CONTROL CONSOLES CONTROL CONSOLES

KMT-1000 KMT-2000
CONTROL DESK Page 117 CONTROL DESK Page 118

KMP-3000
PC CABINET Page 120-121
CONTROL DESK Page 119

114 115

IP55
 CONTROL CONSOLES CONTROL CONSOLES
CONTROL DESKS KMT - 1000 CONTROL DESK

Hinged door on front-rear in KMT-2000 and KMP-3000. Material : Body, panels : 1,50 mm mild steel + RAL 7035 coating
Support plinth corner : 2.00 mm Galvanized steel+RAL 7035 coating
Standard damper support Mounting plate : 2.00 mm Galvanized steel

Single, fixed mounting plate for KMT-1000 series; double and sliding mounting plates for KMT-2000 and KMP-3000 series. IP Protection : IP 55

Standard foamed gland plate Supply includes : 1 pcs compact body, 1 pcs door, 1 pcs top panel with damper, 1 pcs mounting plate,
1 set of gland plate with foam, 1 pcs H100 plinth
Standard H100mm plinth
Please see page 131 for the stainless steel version.

Please see page 198 for technical drawings.

48
4
1030
ENCLOSURE DOOR TYPE REFERENCE
WIDTH(W) NO
600 1 516.350
800 1 518.350
1000 2 510.350
1200 2 512.350

H2
35
0

116 117

IP55
 CONTROL CONSOLES CONTROL CONSOLES
KMT - 2000 CONTROL DESK KMP - 3000 CONTROL DESK

Material : Body, panels : 1,50 mm Mild steel + RAL7035 coating Material : Body, panels : 1,50 mm Mild steel + RAL7035 coating
Support plinth corner : 2.00 mm Galvanized steel+RAL 7035 coating Support plinth corner : 2.00 mm Galvanized steel+RAL 7035 coating
Mounting plate : 2.00 mm Galvanized steel Mounting plate : 2.00 mm Galvanized steel

IP Protection : IP 55 IP Protection : IP 55

Supply includes : 1 pcs compact body, 1 pcs door, 1 pcs top panel with damper, 1 pcs rear door,
2 pcs mounting plate, 1 pcs gland plate with foam, 1 set of H100mm plinth Supply includes : 1 pcs main body, 1 pcs console body and damper panel, 1 pcs top panel, 1 pcs front panel,
1 pcs front door, 1 pcs back door, 2 pcs mounting plates, 1 set of gland plate with foam, 100 mm plinth set

Standard top panel with damper Standard damper on the console panel

Hinged, locked back door Hinged door application on four separate surfaces: back door, front door, console panel and top panel.
W

Two separate sliding mounting plates at the front and back. Two separate sliding mounting plate at the front and back.
52
9

Please see page 131 for the stainless steel version. Please see page 200 for technical drawings. W

388
Please see page 199 for the technical drawings.
38
2
1030

ENCLOSURE DOOR TYPE REFERENCE ENCLOSURE DOOR TYPE REFERENCE

1198,5
WIDTH(W) NO WIDTH(W) NO
600 1+1 526.400 800 1+1 538.450
800 1+1 528.400 1000 2+2 530.450
1000 2+2 520.400 1200 2+2 532.450
H2

H2
1200 2+2 522.400

45
0
40
0

118 119

IP55
 CONTROL CONSOLES CONTROL CONSOLES
PC CABINET PC CABINET

W D
Material : Completly steel material : 1,50 mm mild steel + RAL 7035 coating
Front frame : RAL 9005 coating
Glass : 4 mm tempered glass

IP Protection : IP 55

H
Supply includes : 1 pcs body, openable back door, 2 pcs partial front doors, sliding keyboard part,
2 pcs fixed shelf, H100mm plinth, gland plate with foam, 4 pcs filters.

PC CABINET PC CABINET PC CABINET REFERENCE

WIDTH(W) HEIGHT(H+H2) DEPTH(D) NO

H2
600 1800+100 600 406.186
600 1800+100 800 406.188

FIXED SHELF
Material : 1,50 mm mild steel + RAL 7035 coating

Supply includes : 1 pcs fixed shelf and screws

PC CABINET PC CABINET REFERENCE

WIDTH(W) DEPTH(D) NO
600 600 941.266
600 800 941.268

Closed-system keyboard and mouse

No dust-holding when keyboard and mouse used.

MOVABLE SHELF
Material : 1,50 mm mild steel + RAL 7035 coating

Supply includes : 1 pcs shelf rail

PC CABINET PC CABINET REFERENCE

WIDTH(W) DEPTH(D) NO
600 600 941.306
600 800 941.308

MOUNTING PLATE
Material : 2 mm Galvanized steel

Supply includes : 1 pcs mounting plate

H3
PLATE PLATE REFERENCE
WIDTH (W1) HEIGHT (H3) NO.
490 585 942.308 W1

490 940 942.310

120 121

IP55
 STAINLESS STEEL ENCLOSURES STAINLESS STEEL ENCLOSURES

122 123

IP55
 STAINLESS STEEL ENCLOSURES STAINLESS STEEL ENCLOSURES

STAINLESS STEEL MATERIAL QUALITY AND SURFACE PROCESS

KT TERMINAL BOXES Page 126

NATURAL SURFACE APPLICATION

Standard application

Standard AISI 304 (1.4031) stainless steel.

Suitable surface process: 140 grain

AISI 316 (1.4401) stainless steel can also be used.

Coating can be applied on material. DM WALL-MOUNTED

ENCLOSURES Page 127

DT FLOOR STANDING
ENCLOSURES Page 128-130

KMT CONTROL DESKS Page 131

124 125

IP55
 STAINLESS STEEL ENCLOSURES STAINLESS STEEL ENCLOSURES
KT STAINLESS STEEL TERMINAL BOXES DM STAINLESS STEEL
WALL-MOUNTED ENCLOSURES

Material : Body: 1,50 mm, 304 stainless steel Has the same characteristics as DM service.
Door: 1,50 mm-2,00 mm stainless steel Please see page 16-17 for all qualities.
D
W

Material : All steel sheets: 1,50 mm quality 304 stainless steel Mounting plate: 2,00 mm Galvanized steel
Please contact the customer service for 316 steel sheet

H
Surface process : Natural stainless-steel surface application Surface process : Natural stainless steel surface application application or varnish-coated surface process.

IP Protection : IP 66 IP Protection : Single door: IP 65 Please contact the customer service for special size requests.
Double door: IP54
Supply includes : 1 pcs body,1 pcs screwed lid, 4 pcs wall brackets
and assembly parts DT PANO ÖLÇÜLERİ
ENCLOSURE mm
SIZES (mm) Supply includes : 1 pcs body, 1 pcs door, 1 pcs mounting plate,
GENİŞLİK(W)
WIDTH(W) YÜKSEKLİK(H)
HEIGHT(H) DERİNLİK
DEPTH(D)(D) REFERANCE
REFERANS 1 pcs gland plate, 4 pcs Stainsless steel wall brackets
Please contact the customer service for quality 316 steel sheet NO
application or varnish-coated process. 200 200 120 312.212.K
300 200 120 313.212.K W1 D
D D

Please see page 188 for technical drawings.

W W W

300 300 120 313.312.K

H
400 200 120 314.212.K

H1

H
H
400 300 120 314.312.K
400 400 120 314.412.K
Version 1 Version 2 Version 3
Mounting plate
MOUNTING PLATE APPLICATION WALL BRACKET DM ENCLOSURE SIZES (mm) Mounting Plate (mm)
WIDTH(W) HEIGHT(H) DEPTH(D) REFERANS VERSION LOCK W1 H1
NO QTY
300 400 150 213.415.K 1 1 250 340
300 400 200 213.420.K 1 1 250 340
400 500 200 214.520.K 1 2 350 440
400 600 200 214.620.K 1 2 350 540
400 600 280 214.630.K 1 2 350 540
500 700 200 215.720.K 1 2 450 640
500 700 280 215.730.K 1 2 450 640
600 800 200 216.820.K 1 2 550 740
600 800 280 216.830.K 1 2 550 740
600 1000 280 216.030.K 1 2 550 940
600 1150 280 216.230.K 2 --- 550 1090
800 1000 280 218.030.K 1 2 750 940
Please see page 19 for the option table. 304 stainless steel and included in the standard supply. 800 1150 280 218.230.K 2 --- 750 1090
1000 1000 280 210.030.K 3 --- 950 940
126 127

IP55
 STAINLESS STEEL ENCLOSURES STAINLESS STEEL ENCLOSURES
DT FLOOR STANDING DT FLOOR STANDING
STAINLESS STEEL CABINET STAINLESS STEEL CABINET

ASSEMBLED DT STAINLESS STEEL ENCLOSURE

DT ENCLOSURE SIZES (mm)
WIDTH(W) HEIGHT(H) DEPTH(D) REFERENCE DOOR MOUNTING
NO. PLATE REF. NO
600 1800 400 136.184.K SINGLE 942.618
600 1800 500 136.185.K SINGLE 942.618
600 1800 600 136.186.K SINGLE 942.618
600 1800 800 136.188.K SINGLE 942.618
600 2000 400 136.204.K SINGLE 942.620
600 2000 500 136.205.K SINGLE 942.620
600 2000 600 136.206.K SINGLE 942.620
600 2000 800 136.208.K SINGLE 942.620
800 1800 400 138.184.K SINGLE 942.818
800 1800 500 138.185.K SINGLE 942.818
800 1800 600 138.186.K SINGLE 942.818
800 1800 800 138.188.K SINGLE 942.818
800 2000 400 138.204.K SINGLE 942.820
800 2000 500 138.205.K SINGLE 942.820
800 2000 600 138.206.K SINGLE 942.820
800 2000 800 138.208.K SINGLE 942.820
1000 1800 400 130.184.K DOUBLE 942.018
1000 1800 500 130.185.K DOUBLE 942.018
1000 1800 600 130.186.K DOUBLE 942.018
1000 1800 800 130.188.K DOUBLE 942.018
1000 2000 400 130.204.K DOUBLE 942.020
1000 2000 500 130.205.K DOUBLE 942.020
1000 2000 600 130.206.K DOUBLE 942.020
Material : Body : 1,50 mm 304 stainless steel sheet. Attention : Mounting plate and other interior
Door: 2,00 mm 304 steel sheet. equipments chosen separately Page 129-130 1000 2000 800 130.208.K DOUBLE 942.020
Rear panel: 1,50 mm 304 steel sheet. 1200 1800 400 132.184.K DOUBLE 942.218
Top cover: 1,50 mm 304 steel sheet. 1200 1800 500 132.185.K DOUBLE 942.218
Plinth corners: 2,00 mm 304 steel sheet. 1200 1800 600 132.186.K DOUBLE 942.218
Plinth panels: 1,50 mm 304 steel sheet.
1200 1800 800 132.188.K DOUBLE 942.218
Gland Plate: 1,50 mm 304 steel sheet
1200 2000 400 132.204.K DOUBLE 942.220
Surface process : Natural stainless surface process 1200 2000 500 132.205.K DOUBLE 942.220
1200 2000 600 132.206.K DOUBLE 942.220
IP Protection : IP 55 1200 2000 800 132.208.K DOUBLE 942.220

Supply includes : 1 set of panel body, 1 pcs door, 1 pcs rear panel,
1 pcs top cover, 1 set of gland plate,
1 set of enclosure combination kit,
4 pcs lifting hook.

Please contact the customer service for 316 steel sheet application or
varnish-coated surface process.

128 129

IP55
 STAINLESS STEEL ENCLOSURES STAINLESS STEEL ENCLOSURES
DT FLOOR STANDING KMT-1000 AND KMT-2000
STAINLESS STEEL CABINET STAINLESS CONTROL DESKS

DT STAINLESS STEEL PLINTH

Material : Plinth corners: 2,00 mm 304 stainless steel
Plinth panels: 1,50 mm 304 stainless steel

Supply includes : 4 pcs support corner, 2 pcs front plinth panel, 2 pcs side plinth panel

DT DT H100 H200
ENCLOSURE ENCLOSURE Ref. No. Ref. No.
WIDHT (W) DEPTH (D)
600 400 911.164.K 911.264.K
600 500 911.165.K 911.265.K
600 600 911.166.K 911.266.K
600 800 911.168.K 911.268.K
800 400 911.184.K 911.284.K
800 500 911.185.K 911.285.K
800 600 911.186.K 911.286.K
800 800 911.188.K 911.288.K Material : Body, panels: 1,50 mm 304 stainless steel Please contact the customer service for 316 steel sheet
1000 400 911.104.K 911.204.K Plinth corner: 2,00 mm 304 stainless steel application or varnish-coated surface process.
Bottom panel: 1,50 mm 304 stainless steel
1000 500 911.105.K 911.205.K Mounting panel: 2,00 mm galvanized steel Please see page 198-199 for technical drawings.
1000 600 911.106.K 911.206.K
Surface process : Natural stainless surface application
1000 800 911.108.K 911.208.K
IP Protection : IP 55
1200 400 911.124.K 911.224.K
1200 500 911.125.K 911.225.K Supply includes :
For KMT-1000: 1 pcs back-closed main body, 1 pcs top panel with
1200 600 911.126.K 911.226.K damper, 1 pcs bottom door, gland plate with foam, 1 pcs mounting plate,
1200 800 911.128.K 911.228.K 1 set of 100mm plinth
For KMT-2000: 1 pcs open-back main body, 1 pcs top panel with
damper, 1 pcs bottom door, 1 pcs rear door, gland plate with foam,
2 pcs mounting plate.
W

52
DT STAINLESS STEEL SIDE PANEL

48

9
4
Material : 1,50 mm 304 stainless steel

1030
1030
Supply includes : 2 pcs side panel (1 pair)

DT ENCLOSURE DT ENCLOSURE REFERANCE

H2
H2
HEIGHT(H) DEPTH(D) NO
1800 400 932.418.K 35
0
40
0

1800 500 932.518.K

1800 600 932.618.K KMT-1000 (Closed rear) KMT-2000 (Opened rear)
1800 800 932.818.K ENCLOSURE DOOR TYPE REFERANCE ENCLOSURE DOOR TYPE REFERANCE
2000 400 932.420.K WIDTH(W) NO WIDTH(W) NO
2000 500 932.520.K 600 1 516.350.K 600 1+1 526.400.K
2000 600 932.620.K 800 1 518.350.K 800 1+1 528.400.K
2000 800 932.820.K 1000 2 510.350.K 1000 2+2 520.400.K
1200 2 512.350.K 1200 2+2 522.400.K
130 131

IP55
OUTDOOR CABINETS OUTDOOR CABINETS

Air Filter with Rain Canopy Stainless Steel or Aluminium

Application

304 or 306 stainless steel applications can be executed.

Varnish-coating marks are recommended.

Aluminium (Almg3) and above coating-applications can be

done.

Mounting Plate H100 mm or H200 mm Plinth

of Profiled Plinth

Air-Conditioner or Heat
19’’ Rail Application Exchanger Applications

133

IP55
 OUTDOOR CABINETS OUTDOOR CABINETS

Version 1

H
D W

Version 2

Material : Body, back panel, bottom panel : 1,50 mm galvanized steel + 7035 polyester coating.
Roof : 1,50 mm galvanized steel + RAL 7012 coating
Front door : 1,50 mm – 2,00 mm galvanized steel + RAL 7035 polyester coating

H
IP Protection : IP 55

Supply includes : 1 pcs main body, 1 pcs door, 1 pcs roof, 1 pcs gland plate with foam, mounting plate.

Required : Plinth and mounting plates in page 136-137

W
Please see page 202 for technical drawings. D

Please see page 160-173 for air-conditioning accessories.

134 135

IP55
 OUTDOOR CABINETS OUTDOOR CABINETS

H100mm or H200mm PLINTH

Material : 2,00 mm galvanized steel + RAL 7012 coating

Supply includes : Welded set plinth

HC H100 mm PLINTH HC H200 mm PLINTH

WIDTH DEPTH REFERENCE WIDTH DEPTH REFERENCE
(W) (D) NO. (W) (D) NO.
600 400 913.164 600 400 913.264
600 600 913.166 600 600 913.266
600 800 913.168 600 800 913.268
800 400 913.184 800 400 913.284
800 600 913.186 800 600 913.286
800 800 913.188 800 800 913.288
1200 400 913.124 1200 400 913.224
1200 600 913.126 1200 600 913.226

HC 19’’ RAIL APPLICATION

Material : 2,00 mm mild steel+zinc-plating

Supply includes : 1 set (4 pcs) rail into 600-800 mm width cabinets,

2 set (8 pcs) rails into 1200 mm width cabinets.

Required : In the order it must be given cabinet depth size.

AIR FILTER with RAIN CANOPY

Material : 1,50 mm galvanized steel+RAL 7035 polyester coating HC CABINET SIZES mm

Filter: ABS WIDTH HEIGHT UNIT REFERENCE
(W) (H) (U) NO.
IP Protection : IP 55
600 1100 22 944.961
Supply includes : 1 pc rain canopy, 1 pcs 150x150mm or 250x250mm filter, 600 1600 33 944.966
1 pc top drainage part and combination parts. 600 1900 40 944.969
800 1100 22 944.981
Reference No : 150x150 mm air filter: 983.121 (1 pc) 800 1600 33 944.986
250x250 mm air filter: 983.122 (1 pc)
800 1900 40 944.989
1200 1100 22 944.921
1200 1600 33 944.926
1200 1900 40 944.929

136 137

IP55
 BUSBAR SUPPORTS AND BUSBARS

ADJUSTABLE BUSBAR ADJUSTABLE BUSBAR SUPPORT

SUPPORT Page 140-141 (METAL SUPPORTED) Page 142

ADJUSTABLE, FLAT COMPACT

BUSBAR SUPPORTS Page 143 BUSBAR Page 144-145

PLUG-IN COMPACT FLEXIBLE

BUSBARS Page 146 COPPER BUSBAR Page 147-148

FLEXIBLE BUSBAR
BUSBAR BRACKETS Page 149 BRACKETS Page 150-152

139
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
ADJUSTABLE BUSBAR SUPPORT ADJUSTABLE BUSBAR SUPPORT

1 APPLICATION 2 APPLICATION
Adjustable Rail Bracket,
Type T, page 97

Plug-in Rail
Bracket, page 96

50x25 Scissile Rail page 94

Distance between the busbar supports can be adjusted with Applicable to 5-10mm busbar cross-sections.
25mm steps.
Applicable to 30-120mm busbar sizes. 3 APPLICATION 4 APPLICATION
Easy mounting.
Used in applications between 400A-4500A.
Cost-effective solution.
3 pcs flat copper application.
Operating range between -40oC and +130oC.
Material : Fibre-reinforced polyamid. Adjustable Rail Bracket,
Halogen-free. Type L, page 98
Supply includes : 2 pcs busbar support and
combination screws.
Fire protection in line UL 94 VO standard.
Adjustable Rail Bracket,
References No : Plug in type : 600.001 (1 set: 2 pcs) Type L, page 98
Open type : 600.101 (1 set: 2 pcs)

20 20 Please see page 141 for application modes.

20 20
10 5
12

10 20 5 20
12

10 5
12
17
17

34,5
34,5
17

34,5

10
10
17,50 17,50
17,50

10

133 31
133 31
133 45,5
31
45,5
45,5
18,5
18,5

18,5

8,35
8,35
36,5

8,35
36,5

36,5

100
100
100

140 141
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
ADJUSTABLE BUSBAR SUPPORT ADJUSTABLE, FLAT BUSBAR SUPPORTS
(METAL SUPPORTED)

ABS 3/10

ABS 1/10 ABS 4/5

KIT 200x10

Distance between the busbar supports can be adjusted with Applicable to 5-10mm busbar cross-sections Distance between the phases can be adjusted. Applicable to 5-10mm busbar cross-sections
25mm steps.
Applicable to 50-200mm busbar sizes. Enables easy mounting. Copper busbar has flexibility.
Durable structure
7400A °C damage can be applied. High resistance to short current power Application up till 2300A.
Operating range between -40°C and + 130°C
Supply Includes : 1 set (2 pcs) Operating range between -40°C and -130°C Reference No : 504.991 (12 pcs pack of)
Halogen-free Material : Polyamide, glass fibre reinforced Material : Polyamide, glass fibre reinforced
Fire protection in line with UL 94 VO standard.
Fire protection in line UL 94 VO standard.

PHASE BUSBAR REFERENCE

THIKNESS(mm) NO Heavy equipment profile, page 95
67
mm
1 5 560.860
4 5 560.870
1 10 560.880
2 10 560.890
5 & 10 mm
3 10 560.900
ASSEMBLING KIT
160x10 KIT 560.910
200x10 KIT 560.920

mm
25

142 143
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
COMPACT BUSBAR SUPPORT COMPACT BUSBAR SUPPORT

1 APPLICATION 2 APPLICATION

Adjustable Rail
Bracket, Type T,
page 97

Plug-in Rail Bracket, page 96

50x25 Scissile Rail page 94

4 APPLICATION 3 APPLICATION
The busbar supports can be adjusted with 25mm steps. Applicable to 5-10mm busbar cross-sections.
M6 Hide Nut
Easy mounting Page 113
Applicable to size 25-120 mm busbar.

Cost-effective solution Can be used in applications between 250A-1600A .

Operating range between -40 oC and + 130 oC Suitable for 3 phase application. Adjustable Rail
Bracket, Type T,
Halogen-free page 97
Material : Polyamide glass fibre reinforced.
Fire protection in line with UL 94 VO standard.
Supply Includes : 2 pcs busbar support and
4 screw fastening. combination screws.
Adjustable Rail Bracket,
Type T, page 97
Reference No : 600.002 (1 set: 2 psc)

66,50 66,50

10
5
5 APPLICATION 6 APPLICATION
10

15

35
20

35
229

Adjustable Rail Bracket,

66,75 66,50 66,75

Type L, page 98
5

35
8,3

8,3

8,3

8,

200
Plug-in Rail
Bracket page 96
144 145
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
PLUG-IN COMPACT BUSBARS FLEXIBLE COPPER BUSBARS

Made from electrolyte conductive copper.

Highly-protected support.Made from self-extinguishing PVC

or silicon composition.

Maximum bending and turning.

Operating range between -25 Co and +150 Co.

High flexibility: 370%

Nominal Voltage: 1000V AC/ 1500 V DC

Volume %25

-%40 Time saving,

improved reliability

146 147
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
FLEXIBLE COPPER BUSBARS FLEXIBLE BUSBAR BRACKETS

FS 40-63

RFS

UFS KIT

FS 24

SELECTION OF ERIFLEX FLEXIBAR ACCORDING TO THE INTERNAL TEMPERATURE OF THE PANEL UFS KIT
Temperature rise of conductor = T2 - T1 = ΔT (K)
Bracket for flexible busbars.
Ex.: For a current of 630 A, with
2mm aliminium profile and 24 pcs bracket.
Ambient T1 = 40°C - T2 = 90°C
Temperature Made from glass-fibre-reinforced, non-halogen
1) ΔT = 90 - 40 = 50 K polyamid
2) In the 50°C column, find the closest current value to 630A. Reference Number: 553.590
ERIFLEX FLEXIBAR 5 x 32 x 1 - 552650 - 160 mm2 - 640A
3) Select ERIFLEX FLEXIBAR according to the terminal width
Internal temperature of panel (T1) of the equipment being connected. FS SPACER CLAMP
Temperature of conductors (T2)

Holds flexible busbars evenly and in parallel position.

ADMISSIBLE CURRENTS : This table indicates the temprature rise produced by choosen current in the given section.
This calculation does not take into account the heat dissipation from the switch gear. Sufficient number of perforations for optimum cooling.

4 pcs flexible busbar can be held together.

CURRENT
ΔT (K) COEFFICIENT
A UNIT PACKS REF. SECTION
METER OF NO mm2
N A B 70 60 50 40 30 20 DESCRIPTION FLEXABLE H(mm) L(mm) PACKS REFERENCE
2 5 552.490 2 20 1 40 326 300 275 246 214 174 1.72 2.25 BUSBAR TYPE OF NO
250A 2 5 552.500 3 20 1 60 428 395 360 323 280 228 1.72 2.25 FS 24 =< 24mm 53 30 25 553.550
2 5 552.520 5 20 1 100 498 460 420 376 326 266 1.72 2.25 FS 32 =< 32mm 53 38 25 553.560
400A
2 5 552.530 6 20 1 120 546 506 462 413 358 292 1.72 2.25 FS 40-63 40,50,63mm 95 150 10 553.570
2 5 552.580 5 24 1 120 608 563 514 460 398 325 1.72 2.25 FS 80-100 80/100mm 140 200 10 553.580
500A 2 5 552.590 6 24 1 144 670 620 566 506 438 358 1.72 2.25
2 5 552.650 5 32 1 160 758 702 640 573 496 405 1.72 2.25
630A
2 5 552.660 6 32 1 192 846 783 715 640 555 452 1.72 2.25 RFS SUPPORT
800A 2 5 552.730 6 40 1 240 1018 943 860 770 667 544 1.72 2.25
2 5 552.740 8 40 1 320 1230 1140 1040 930 805 658 1.72 2.25
1000A Can hold 8 pcs busbar in parallel position.
2 5 552.750 10 40 1 400 1400 1295 1181 1055 915 747 1.72 2.25
1250A 2 2 552.810 10 50 1 500 1650 1525 1395 1245 1080 882 1.72 2.25 Can be mounted with 25mm steps on the plate.
2 2 552.870 10 63 1 630 1895 1755 1600 1435 1240 1012 1.65 2.12
Recommended distance between the brackets: 400 mm
2 2 552.920 8 80 1 640 1895 1755 1600 1435 1240 1012 1.65 2.12
1600A
2 2 552.930 10 80 1 800 2100 1945 1775 1585 1375 1123 1.65 2.12
2 2 552.990 12 100 1 1200 2500 2315 2115 1890 1636 1338 1.6 2.02

When using 2 or 3 busbar in parallel, use the coefficient: DESCRIPTION FLEXABLE A(mm) B(mm) C(mm) D(mm) PACKS REFERENCE
BUSBAR TYPE OF NO
Example : 5 x 32 x 1 - ΔT = 50 K: 640 A RFS 40-63 40,50,63mm 150 175 90 120 1 553.370
2 parallel bars > 640A x 1,72 = 1100A
RFS 80-100 80/100mm 200 225 140 170 1 553.380
3 parellel bars > 640A x 2,25 = 1440A

148 149
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
BUSBAR BRACKETS BUSBAR BRACKETS

BC

FBC

CONT KIT
HCBC

QCC

FC

FC BUSBAR CLAMP
Holding capacity: 20mm
FBC CONNECTORS FOR CONNECTING without DRILLING
2 pcs mild steel+ zinc-plating part tightened with 8.8 quality M8 screws.
Applicable to non-perforated busbar combinations.
DESCRIPTION A(mm) B(mm) C(mm) D(mm) E(mm) F(mm) PACKS REFERENCE
OF NO. Applicable to 5-10mm busbar thickness.
FC 50 x24 50 20-24 60 36 75 52 3 553.020
FC 50 x32 50 32 60 44 75 60 3 553.030 Cables from 1 mm2 up to 185 mm2 or flexibar width 6 to 20 mm
FC 50 x40 50 40 60 52 75 68 3 553.040
FC 80 x24 80 20-24 90 36 105 52 3 553.050
FC 80 x32 80 32 90 44 105 60 3 553.060
FC 80 x50 80 50 90 62 105 78 3 553.070
FC 100 x32 100 32 110 44 125 60 3 568.700
BUSBAR THICKNESS 5 mm
FC 120 x32 120 32 130 44 145 60 3 568.730
DESCRIPTION A(mm) B(mm) C(mm) CABLE SIZE PACKS REFERENCE
mm2 OF NO
BC RIBBED - STEEL BUSBAR CLAMP
FBC 5x4 23 29 11 4 15 553.405
Holding capacity: 20mm
FBC 5x6 27 23 11.5 6mm 2,5-16 15 553.400
2 pcs zinc-plated, reinforced steel sheet effectively tightened with the help of grooves. FBC 5x9 38 40 19 9mm 16-50 15 553.410
FBC 5x15,5 44 40 25 15,5mm 35-70 15 553.510
You can increase the copper connection, holding height up to 50 mm by using different size bolts.
FBC 5x20 49 40 31 20mm 70-185 15 553.520

DESCRIPTION A(mm) B(mm) C(mm) DIAMETER PACKS REFERENCE

OF NO
BC 30 56 42 30 M6 8 553.200 BUSBAR THICKNESS 10 mm
BC 40 66 52 40 M6 8 553.210 DESCRIPTION A(mm) B(mm) C(mm) CABLE SIZE PACKS REFERENCE
BC 50 83 64 50 M8 8 553.220 mm2 OF NO
BC 63 93 74 63 M8 4 553.230 FBC 10x4 28 29 11 4 15 553.505
BC 80 118 96 80 M10 4 553.250 FBC 10x6 33 23 11.5 6mm 2,5-16 15 553.430
BC 100 144 118 100 M10 4 553.260 FBC 10x9 42 40 19 9mm 16-50 15 553.440
FBC 10x15,5 49 40 25 15,5mm 35-70 15 553.530
HCBC HIGN-CURRENT BUSBAR CLAMP FBC 10x20 54 40 31 20mm 70-185 15 553.540

40 mm/ Holding capacity: 40mm

This modular busbar bracket is used in transformer combinations.

The brackets are made from non-magnetic

materials for heavy current combinations. DESCRIPTION A(mm) B(mm) C(mm)
HCBC 80 80 140 553.100
Please use 2 pcs bracket to assure
tightening force. HCBC 100 100 160 553.110
HCBC 120 120 180 553.120
150 151
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
BUSBAR BRACKETS BUSBAR CALCULATION TABLES

ADJUSTABLE BUSBAR SUPPORT

CABS 4/5
Ipk KA 24 48 63 82 114 145 152 165 187 209
FBC Icc rms KA1s 12 23 30 39 52 66 69 75 85 95
Distance Between Busbar Supports(mm)
Busbar
Section Distance Between Phases to D=112,5mm
CONT KIT
30x5mm 1000 664 501 385 276 217 207 191 168 150
40x5mm 1000 755 579 445 318 251 240 220 194 174
50x5mm 1000 845 647 498 356 280 268 247 217 194
QCC 63x5mm 1000 948 727 559 400 315 301 277 244 207
80x5mm 1000 1000 819 630 451 355 339 312 259 207
100x5mm 1000 1000 916 704 504 397 380 333 259 207
120x5mm 1000 1000 1000 788 568 430 394 333 259 207
Distance Between Phases to D=125mm
30x5mm 1000 689 528 406 291 229 219 201 177 159
QCC CLAMP 40x5mm 1000 796 610 469 336 264 253 232 205 183
Applicable to flexible busbars. 50x5mm 1000 890 682 525 375 296 283 260 229 205
63x5mm 1000 1000 766 589 421 332 317 292 257 230
1 pcs bracket required for a thickness of 5mm or less; 2
pcs bracket for thicker sizes. 80x5mm 1000 1000 863 664 475 374 358 329 288 230
100x5mm 1000 1000 965 742 531 418 400 368 288 230
120x5mm 1000 1000 1000 830 594 468 437 370 288 230
FLEX BAR
Distance Between Phases to D=150mm
DESCRIPTION MİN MAX L(mm) F(mm) PACKS REFERENCE 30x5mm 1000 755 579 445 318 251 240 220 194 174
mm mm OF NO
40x5mm 1000 872 669 514 368 290 277 255 225 201
QCC 6/13 6 13 48 25 5 561.200 50x5mm 1000 975 748 575 411 324 310 285 251 225
QCC 15,5/32 15.5 32 70 50 5 561.210 63x5mm 1000 1000 839 645 462 364 348 320 282 252
QCC 40/63 40 63 95 75 5 561.220 80x5mm 1000 1000 946 727 520 410 392 361 318 277
100x5mm 1000 1000 1000 813 582 458 438 403 346 277
DESCRIPTION TORQUE PACKS REFERENCE 120x5mm 1000 1000 1000 910 651 513 490 444 346 *
CONT KIT N.m OF NO
Special steel screw, nut and washer CONT KIT M6 x16 13 100 558.310
CONT KIT M8 x30 30 100 558.340
For good electrical contact CONT KIT M10 x30 60 100 558.370
Supply Includes : 100 screw, 100 nut and CONT KIT M10 x50 60 100 558.410 CABS 4/5
200 pcs contact washers CONT KIT M12 x30 110 100 558.440 Ipk KA 48 63 82 114 145 152 165 187 209 231
Washers design from: 8/8 ZN8C CONT KIT M12 x40 110 100 558.460 Icc rms KA1s 23 30 39 52 66 69 75 85 95 105
CONT KIT M12 x50 110 100 558.480 Distance Between Busbar Supports(mm)
Busbar
CONT KIT M12 x60 110 100 558.880 Section Distance Between Phases to D=150mm
CONT KIT M12 x80 110 100 558.490 30x10mm 1000 1000 891 638 502 480 442 390 341 279
40x10mm 1000 1000 1000 736 580 555 510 427 341 279
50x10mm 1000 1000 1000 824 649 620 548 427 341 279
60x10mm 1000 1000 1000 902 709 648 548 427 341 279
80x10mm 1000 1000 1000 1000 709 648 548 427 341 279
CLAMPING TORQUE CALCULATION 100x10mm 1000 1000 1000 1000 709 648 548 427 341 279
120x10mm 1000 1000 1000 1000 709 648 548 427 341 279
Distance Between Phases to D=175mm
30x10mm 1000 1000 963 689 543 519 477 421 377 326
40x10mm 1000 1000 1000 796 627 599 551 486 399 326
50x10mm 1000 1000 1000 890 701 670 616 498 399 326
60x10mm 1000 1000 1000 975 768 734 640 498 399 326
O M6 M8 M10 M12 M14 M16
80x10mm 1000 1000 1000 1000 827 756 640 498 399 326
F(daN) 800 1450 2300 3700 4400 6000 100x10mm 1000 1000 1000 1000 827 756 640 498 399 326
Clamping 13 30 60 110 174 274 120x10mm 1000 1000 1000 1000 827 756 640 498 399 326
Torque Nm

152 153
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
BUSBAR CALCULATION TABLES BUSBAR CALCULATION TABLES

ADJUSTABLE FLAT BUSBAR SUPPORT ADJUSTABLE BUSBAR SUPPORT

(METAL-REINFORCED)

AFBS 600 - AFB

Ipk KA 11 14 24 48 63 82 114 145 152 165
Icc rms KA1s 23 30 39 52 66 69 75 85 95 105
Busbar Distance Between Busbar Supports(mm)
Section
30x5mm 1000 1000 1000 698 464 274 140 x x x
ABS 1/5
40x5mm 1000 1000 1000 915 537 317 162 100 x x
Ip KA 24 48 63 82 114 145 152 165 187 209 231
50x5mm 1000 1000 1000 1000 610 361 184 114 104 x
Icc rms KA1s 12 23 30 39 52 66 69 75 85 95 105
63x5mm 1000 1000 1000 1000 705 416 213 132 121 102 Distance Between Busbar Supports(mm)
Busbar
80x5mm 1000 1000 1000 1000 824 490 250 155 142 120 Section Distance Between Phases to D=75mm
100x5mm 1000 1000 1000 1000 974 576 295 182 167 141
50x5mm 801 398 305 234 167 132 126 116 102 X X
125x5mm 1000 1000 1000 1000 1000 683 350 217 198 168
63x5mm 900 446 342 263 188 148 141 130 115 102 X
50X10mm 1000 1000 1000 1000 610 361 184 114 104 x
80x5mm 1000 503 386 296 212 167 159 147 129 116 104
60x10mm 1000 1000 1000 1000 683 404 206 128 117 x
100x5mm 1000 563 431 331 237 187 178 164 145 129 117
80x10mm 1000 1000 1000 1000 828 490 250 155 142 120
125x5mm 1000 629 482 371 265 209 200 184 162 145 131
100x10mm 1000 1000 1000 1000 974 576 295 182 167 141
Distance Between Phases to D=100mm
120x10mm 1000 1000 1000 1000 1000 662 339 210 192 162 50x5mm 925 459 352 270 193 152 145 134 118 105 X
63x5mm 1000 516 395 304 217 171 163 150 132 118 107
80x5mm 1000 581 445 342 245 193 184 169 149 134 121
100x5mm 1000 650 498 383 274 216 206 190 167 149 135
COMPACT BUSBAR SUPPORT 125x5mm 1000 727 557 428 306 241 231 212 187 167 151
Distance Between Phases to D=125mm
50x5mm 1000 514 394 303 216 170 163 150 132 118 107
63x5mm 1000 577 442 340 243 191 183 168 148 133 120
80x5mm 1000 650 498 383 274 216 206 190 167 149 135
100x5mm 1000 727 557 428 306 241 231 212 187 167 151
125x5mm 1000 813 623 479 343 270 258 237 209 187 169
Distance Between Phases to D=150mm
50x5mm 1000 563 431 331 237 187 178 164 145 129 117
63x5mm 1000 632 484 372 266 210 200 184 162 145 131
80x5mm 1000 712 546 420 300 236 226 208 183 164 148
100x5mm 1000 796 610 469 336 264 253 232 205 183 166
125x5mm 1000 890 682 525 375 296 283 260 229 205 185
Distance Between Phases to D=175mm
COMPACT BUSBAR SUPPORT COMPACT BUSBAR SUPPORT
50x5mm 1000 608 466 358 256 202 193 177 156 140 126
Distance Between Busbar Supports(mm) Distance Between Busbar Supports(mm) 63x5mm 1000 683 523 402 288 226 216 199 176 157 142
Busbar
414mm 514mm 714mm 914mm 1114mm Busbar
414mm 514mm 714mm 914mm 1114mm 80x5mm 1000 769 590 453 324 255 244 224 198 177 160
Section Section
Short Circuit Efective Value (Icc rms) Short Circuit Efective Value (Icc rms)
30x5mm 26 KA 21 KA 15 KA 11 KA 9 KA 40x10mm 48 KA 40 KA 29 KA 22 KA 18 KA 100x5mm 1000 860 659 507 363 285 273 251 221 198 179
40x5mm 30 KA 24 KA 17 KA 13 KA 11 KA 50x10mm 55 KA 44 KA 32 KA 25 KA 20 KA 125x5mm 1000 962 737 567 406 319 305 281 248 222 200
50x5mm 34 KA 27 KA 20 KA 15 KA 12 KA 60x10mm 61 KA 49 KA 35 KA 27 KA 22 KA Distance Between Phases to D=200mm
60x5mm 36 KA 29 KA 21 KA 17 KA 13 KA 80x10mm 70KA 56 KA 40 KA 31 KA 26KA 50x5mm 1000 650 498 383 274 216 206 190 167 149 185
80x5mm 43 KA 35 KA 25 KA 19 KA 16 KA 100x10mm 78KA 63 KA 45 KA 35 KA 29KA 63x5mm 1000 730 559 430 308 242 232 213 188 168 152
100x5mm 48 KA 40 KA 28 KA 22 KA 17 KA 120x10mm 85KA 69 KA 50 KA 39 KA 32KA 80x5mm 1000 822 630 485 347 273 261 240 212 189 171
100x5mm 1000 920 705 542 388 305 292 268 237 212 191
125x5mm 1000 1000 788 606 434 341 327 300 265 237 214

154 155
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS

ADJUSTABLE BUSBAR SUPPORT (METAL-REINFORCED)

ADJUSTABLE BUSBAR SUPPORT
ABS 1/10
(METAL-REINFORCED) Ip KA 24 48 63 82 114 145 152 165 187 209 231
Icc rms KA1s 12 23 30 39 52 66 69 75 85 95 105
Busbar Distance Between Busbar Supports(mm)
Section Distance Between Phases to D=75mm
50x10mm 1000 796 610 469 336 264 253 232 205 183 166
60x10mm 1000 872 669 514 368 290 277 255 225 201 182
80x10mm 1000 1000 772 594 425 334 320 294 250 224 183
100x10mm 1000 1000 863 664 475 374 358 329 280 224 183
120x10mm 1000 1000 946 727 520 410 392 360 280 224 183
160x10mm 1000 1000 1000 840 601 466 426 360 280 224 183
200x10mm 1000 1000 1000 939 672 466 426 360 280 224 183
Distance Between Phases to D=100mm
50x10mm 1000 920 705 542 388 305 292 268 237 212 191
60x10mm 1000 1000 772 594 425 334 320 294 259 232 210
80x10mm 1000 1000 892 686 491 386 370 340 300 268 242
ABS 4/5
Ip KA 24 48 63 82 114 145 152 165 187 209 231 100x10mm 1000 1000 997 767 549 432 413 380 335 299 245
Icc rms KA1s 12 23 30 39 52 66 69 75 85 95 105 120x10mm 1000 1000 1000 840 601 473 453 416 367 299 245
Distance Between Busbar Supports(mm) 160x10mm 1000 1000 1000 970 694 547 523 481 374 299 245
Busbar
Section Distance Between Phases to D=100mm 200x10mm 1000 1000 1000 1000 776 611 568 481 374 299 245
50x5mm 1000 920 705 542 388 305 292 268 237 212 191 Distance Between Phases to D=125mm
63x5mm 1000 1000 791 608 435 343 328 302 266 238 215 50x10mm 1000 1000 788 606 434 341 327 300 265 237 214
80x5mm 1000 1000 892 686 491 386 370 340 300 268 242 60x10mm 1000 1000 863 664 475 374 358 329 290 260 235
100x5mm 1000 1000 997 767 549 432 413 380 335 300 262 80x10mm 1000 1000 997 767 549 432 413 380 335 300 271
125x5mm 1000 1000 1000 857 614 483 462 425 375 320 262 100x10mm 1000 1000 1000 857 614 483 462 425 375 335 303
Distance Between Phases to D=125mm 120x10mm 1000 1000 1000 939 672 529 506 466 411 368 306
50x5mm 1000 1000 788 606 434 341 327 300 265 237 214 160x10mm 1000 1000 1000 1000 776 611 585 538 468 374 306
63x5mm 1000 1000 885 680 487 383 367 337 297 266 241 200x10mm 1000 1000 1000 1000 868 684 654 601 468 374 306
80x5mm 1000 1000 997 767 549 432 413 380 335 300 271 Distance Between Phases to D=150mm
100x5mm 1000 1000 100 854 614 483 462 425 375 335 303 * 1000 1000 863 664 475 374 358 329 290 260 235
125x5mm 1000 1000 1000 959 686 540 517 475 419 375 327 60x10mm 1000 1000 946 727 520 410 392 361 318 284 257
Distance Between Phases toı D=150mm 80x10mm 1000 1000 1000 840 601 473 453 416 367 329 297
50x5mm 1000 1000 863 664 475 374 358 329 290 260 235 100x10mm 1000 1000 1000 939 672 529 506 466 411 368 332
63x5mm 1000 1000 969 745 533 420 402 369 326 291 264 120x10mm 1000 1000 1000 1000 736 58 555 510 450 403 364
80x5mm 1000 1000 1000 840 601 473 453 416 367 329 297 160x10mm 1000 1000 1000 1000 851 670 641 589 520 450 368
100x5mm 1000 1000 1000 939 672 529 506 466 411 368 332 200x10mm 1000 1000 1000 1000 951 749 717 659 562 450 368
125x5mm 1000 1000 1000 1000 752 592 566 521 459 411 372 Distance Between Phases to D=175mm
Distance Between Phases to D=175mm 50x10mm 1000 1000 933 717 513 404 387 356 314 280 254
50x5mm 1000 1000 933 717 513 404 387 356 314 280 254 60x10mm 1000 1000 1000 786 562 443 423 390 344 307 278
63x5mm 1000 1000 1000 805 576 454 434 399 352 315 285 80x10mm 1000 1000 1000 907 649 511 489 450 397 355 321
80x5mm 1000 1000 1000 907 649 511 489 450 394 355 321 100x10mm 1000 1000 1000 1000 726 572 547 503 444 397 359
100x5mm 1000 1000 1000 1000 726 572 547 503 444 397 359 120x10mm 1000 1000 1000 1000 796 627 599 551 486 435 393
125x5mm 1000 1000 1000 1000 812 640 612 563 496 444 402 160x10mm 1000 1000 1000 1000 919 724 692 637 562 502 429
Distance Between Phases to D=200mm
200x10mm 1000 1000 1000 1000 1000 809 774 712 628 525 429
Distance Between Phases to D=200mm
50x5mm 1000 1000 997 767 549 432 413 380 335 300 271
50x10mm 1000 1000 997 767 549 432 413 380 335 300 171
63x5mm 1000 1000 1000 861 616 485 464 427 376 337 305
60x10mm 1000 1000 1000 840 601 473 453 416 367 329 297
80x5mm 1000 1000 1000 970 694 547 523 481 424 380 343
80x10mm 1000 1000 1000 970 694 547 523 481 424 380 343
100x5mm 1000 1000 1000 1000 776 611 585 538 475 425 384
100x10mm 1000 1000 1000 1000 776 611 585 538 475 425 384
125x5mm 1000 1000 1000 1000 868 684 654 602 531 475 429
120x10mm 1000 1000 1000 1000 851 670 641 589 520 465 421
160x10mm 1000 1000 1000 1000 982 774 740 681 601 537 486
200x10mm 1000 1000 1000 1000 1000 865 828 761 672 600 491

156 157
 BUSBAR SUPPORTS AND BUSBARS BUSBAR SUPPORTS AND BUSBARS
BUSBAR CALCULATION TABLES BUSBAR CALCULATION TABLES

ADJUSTABLE BUSBAR SUPPORT ADJUSTABLE BUSBAR SUPPORT

(METAL-REINFORCED) (METAL-REINFORCED)

ABS 2/10 ABS 3/10

Ip KA 24 48 63 82 114 145 152 165 187 209 231 Ip KA 24 48 63 82 114 145 152 165 187 209 231
Icc rms KA1s 12 23 30 39 52 66 69 75 85 95 105 Icc rms KA1s 12 23 30 39 52 66 69 75 85 95 105
Busbar Distance Between Busbar Supports(mm) Busbar Distance Between Busbar Supports(mm)
Section Distance Between Phases to D=125mm Section Distance Between Phases to D=150mm
50x10mm 1000 1000 1000 857 614 483 462 425 375 335 303 50x10mm 1000 1000 1000 1000 824 649 620 521 503 450 393
60x10mm 1000 1000 1000 939 672 529 506 466 411 368 327 60x10mm 1000 1000 1000 1000 902 711 680 625 552 480 393
80x10mm 1000 1000 1000 1000 776 611 585 538 475 400 327 80x10mm 1000 1000 1000 1000 1000 821 785 722 600 480 393
100x10mm 1000 1000 1000 1000 868 684 654 602 500 400 327 100x10mm 1000 1000 1000 1000 1000 918 848 771 600 480 393
120x10mm 1000 1000 1000 1000 951 749 717 642 500 400 327 120x10mm 1000 1000 1000 1000 1000 996 911 771 600 480 393
160x10mm 1000 1000 1000 1000 1000 830 759 642 500 400 327 160x10mm 1000 1000 1000 1000 1000 996 911 771 600 480 393
200x10mm 1000 1000 1000 1000 1000 830 759 642 500 400 327 200x10mm 1000 1000 1000 1000 1000 996 911 771 600 480 393
Distance Between Phases to D=150mm Distance Between Phases to D=175mm
50x10mm 1000 1000 1000 939 672 529 506 466 411 368 332 50x10mm 1000 1000 1000 1000 890 701 670 616 544 486 440
60x10mm 1000 1000 100 100 736 580 555 510 450 403 364 60x10mm 1000 1000 1000 1000 975 768 734 675 596 533 459
80x10mm 1000 1000 1000 1000 851 670 641 589 520 465 393 80x10mm 1000 1000 1000 1000 1000 887 848 780 688 560 459
100x10mm 1000 1000 1000 1000 951 749 717 659 581 480 393 100x10mm 1000 1000 1000 1000 1000 991 948 872 700 560 459
120x10mm 1000 1000 1000 1000 1000 821 785 722 600 480 393 120x10mm 1000 1000 1000 1000 1000 1000 1000 900 700 560 459
160x10mm 1000 1000 1000 1000 1000 948 907 771 600 480 393 160x10mm 1000 1000 1000 1000 1000 1000 1000 900 700 560 459
200x10mm 1000 1000 1000 1000 1000 996 911 771 600 480 393 200x10mm 1000 1000 1000 1000 1000 1000 1000 900 700 560 459
Distance Between Phases to D=175mm Distance Between Phases to D=200mm
50x10mm 1000 1000 1000 1000 726 572 547 503 444 394 359 50x10mm 1000 1000 1000 1000 951 749 717 659 581 520 471
60x10mm 1000 1000 1000 1000 796 627 599 551 486 435 393 60x10mm 1000 1000 1000 1000 1000 821 785 722 637 570 516
80x10mm 1000 1000 1000 1000 919 724 692 637 562 502 455 80x10mm 1000 1000 1000 1000 1000 948 907 834 736 641 524
100x10mm 1000 1000 1000 1000 1000 809 774 712 628 560 459 100x10mm 1000 1000 1000 1000 1000 1000 1000 933 801 641 524
120x10mm 1000 1000 1000 1000 1000 887 848 780 688 560 459 120x10mm 1000 1000 1000 1000 1000 1000 1000 1000 801 641 524
160x10mm 1000 1000 1000 1000 1000 1000 979 900 700 560 459 160x10mm 1000 1000 1000 1000 1000 1000 1000 1000 801 641 524
200x10mm 1000 1000 1000 1000 1000 1000 1000 900 700 560 459 200x10mm 1000 1000 1000 1000 1000 1000 1000 1000 801 641 524
Distance Between Phases to D=200mm
50x10mm 1000 1000 1000 1000 776 611 585 538 475 425 384
60x10mm 1000 1000 1000 1000 851 170 641 589 520 465 421
80x10mm 1000 1000 1000 1000 982 774 740 681 601 537 486
100x10mm 1000 1000 1000 1000 1000 865 828 761 672 601 524
120x10mm 1000 1000 1000 1000 1000 948 907 834 736 641 524
160x10mm 1000 1000 1000 1000 1000 1000 1000 963 801 641 524
200x10mm 1000 1000 1000 1000 1000 1000 1000 1000 801 641 524

158 159
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING

VENTILATION FILTERS AND FANS

Page 164-165

AIR-CONDITIONERS AND HEAT EXCHANGERS

Page 166-171

HEATERS
Page 172

THERMAL CONTROL PRODUCTS

Page 173

160 161
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
AIR-CONDITIONING APPLICATIONS
BY FACTORS

Controlling enclosure or cabinet internal temperature is crucial for the efficiency of the equipments operating MAX. OUTDOOR TEMP REQUIRED MAX. INDOOR TEMP.
1
inside. In electrical equipments, particulary those operating with electronic signalling, heat and dust directly effect HARMLESS DUST and HUMIDITY DENSITY
equipment performance. The maximum temperature for equipments supposed to operate at max 30°C should not
exceed 26-27°C In particular, efficiency of CPU operated equipments decrease if not cooled. As a result of this, the METHOD I METHOD II
equipments fail communicate at the desired speed and efficiency leading to temporary or permanent malfunction.
(PASSIVE VENTILATION) (ACTIVE VENTILATION)
Tracking costs of these malfunctions are known by everyone. There is also another problem in terms of heat and
chemicals. External dust sticks on the surface of the CPU or other equipments during cooling. It gradually strafies
and constitutes a layer between the surface and air. This layer blocks cooling regardless of the cooling equipment Roof type
Air filters Fan with filter Ventilation fan
and causes malfunctions. This is the first impact of the dust. The second impact is chemical and physical. As
known, dust acidifies metal particles and accomodates similar bacteria. These cause corrosion on the conductive
surface and separation of contacts and conductors. These even decrease conductivity of the material. Another
Air filters Air filters
factor that affects the equipments is humidity. As oxidized materials in humidity cause separation in inter-conductor
contact, they increase the temperature and decrease the flow.

Attention : In Method I equipment heat is not high. Filters require maintanence.

In Method II equipment heat is high. Air volume is required. Filters require maintanence.

2 MAX. OUTDOOR TEMP REQUIRED MAX. INDOOR TEMP

HARMFUL DUST and HUMIDITY DENSITY
Here follow a summary of the factors to consider for cooling electrical equipments and maintaining their
performance:
As dense dust and humidity frequently fills the filters, air flow and cooling
1-) Heat radiated by the equipment (watt value in terms of total power) weakens. The filters require frequent maintanence and this poses a risk.
2-) Outdoor temperature Air to Air Heat
Exchanger Heat exchangers do not mix indoor air flow and outer air flow. It is dust-
3-) Dust resistant and does not require cleaning. There is no risk of failure as they
4-) Outdoor humidity proportion (multiple humidity) do not have compressing and gas. It is not consume in high level energy

Suitable air-conditioning product can be chosen according to heat radiated by the equipment, enclosure/cabinet
size and outdoor temperature factors. Please contact our customer service for your requests.

MAX. OUTDOOR TEMP REQUIRED MAX. INDOOR TEMP

3
HARMFUL DUST and HUMIDITY DENSITY

High outdoor heat is reduced to the desired level by means of gas and
compressing equipment.
Air-Conditioner
or Air to Indoor cooling (evaporator) and outer cooling (condenser) are separate,
water Heat and the indoor environment does not catch any dust from outside.
exchanger
The condenser requires cleaning at regular intervals.
Cooling is restored by use of air/ water type heater exchanger. No
compressor cost, low energy consumption. Outdoor of the compressor
does not cause overheating with the condenser.

162 163
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
AIR FILTER and FAN FILTER ROOF TYPE VENTILATION FAN

AIR FILTERS ROOF TYPE VENTILATION FAN

(RAL 7035)
Colour : RAL 7035
Material : ABS Ral 7035
IP Protection : IP 54
IP Protection : IP 54 FILTER REFERENCE
SIZE NO Used Fan : Papst
Easy cleaning with drawer filter. 150x150 mm 983.106
Used in 230V AC.
250x250 mm 983.107
325x325 mm 983.110
It ejects the heated air inside of the enclosure coming from vertical angle to
horizantal angle. From the reason type of fan which ejects the air with horizantal
angle, the counterpressure is at the minumum level. By this way it makes active
and economic cooling with less power/ consumption and low fan cost.
AIR FILTERS
(CHROME COLOR) İt requires sufficient size of air filters for compensation of the enclosure inside
pressure between fan force of gravity.
Material : ABS + metallic coating
It suggests using at the situation which the maximum inside required
IP Protection : IP 54
temprature is higher than or equal maximum outside temperature
Easy cleaning with drawer filter.
Required max. inside temp. Outside max. temp
FILTER REFERENCE
SIZE NO
150x150 mm 983.108
250x250 mm 983.109
325x325 mm 983.111 FAN FLOW FAN POWER REFERENCE NO
560 m /hour
3
58 W 982.202
970 m3/hour 85 W 982.203
FAN WITH FILTER

IP Protection : IP 54

Used Fan : Papst

230V AC Voltage

It suggets using at the situation which the maximum inside required

temprature is higher than or equal maximum outside temprature

At standard fans fix to eject air. For opposite the fan positions must be
changed.

FILTER SIZE COLOUR AIR FLOW FAN REFERENCE

POWER NO
150x150mm RAL 7035 60m3/hour 19W 983.131
250x250mm RAL 7035 160m3/hour 45W 983.141
250x250mm RAL 7035 450m3/hour 64W 983.151
150x150mm CROME 60m3/hour 19W 983.331
250x250mm CROME 160m3/hour 45W 983.341
250x250mm CROME 450m3/hour 64W 983.351

164 165
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
AC / AIR-CONDITIONERS AC / AIR-CONDITIONERS

WALL-MOUNTED AIR-CONDITIONERS TOP MOUNTED AIR-CONDITIONERS

230V products are in stock. Please contact our customer service for 115V or 400V product demands. 230V products are in stock. Please contact our customer service for 115V or 400V product demands.

Please contact our customer service for your UL version product demands. Please contact our customer service for your UL version product demands.

AIR CONDITIONER SIZES mm

AIR CONDITIONER SIZES mm
COOLING POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE
CAPACITY(W) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO COOLING POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE
CAPACITY(W) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO
500 230-1-50/60 315 642 221 164-195 295 17 CVE0500220800
1100 230-1-50/60 413 913 248 540-580 505 44 CVE1100220800 2000 230-1-50/60 600 450 400 860 1200 51.5 ETE20 0022 07000
1500 230-1-50/60 413 913 248 540-580 630 46 CVE1500220800 3800 230-1-50/60 800 480 450 1450 2000 76.5 ETE41 0022 07000
2000 230-1-50/60 413 1005 263 540-580 980 48 CVE2000220800
3000 230-1-50/60 514 1219 347 890-930 1100 75 CVE3000220800

166 167
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
AC / AIR-CONDITIONERS HEAT EXCHANGERS

WALL-MOUNTED OUTDOOR AIR-CONDITIONERS AIR / AIR HEAT EXCHANGERS (INDOOR)

230V products are in stock. Please contact our customer service for 115V or 400V product demands.

AIR CONDITIONER SIZES mm AIR CONDITIONER SIZES mm

COOLING POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE SPECIFIC HEAT POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE
CAPACITY(W) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO TRANSMISSION(W/K) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO
800 230-1-50/60 308 634 221 340-356 430 26 CVO08002208000 35 230-1-50/60 252 780 86 575 160 7.5 XVA35 00 320
1500 230-1-50/60 409 934 244 540-580 630 42 CVO15002208000 80 230-1-50/60 311 1250 106 860 170 20 XVA80 00 320
2000 230-1-50/60 409 934 244 540-580 980 44 CVO20002208000
4000 230-1-50/60 508 1234 375 1730-1950 1640 81 CVO40002208000

168 169
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
HEAT EXCHANGERS HEAT EXCHANGERS

AIR / AIR HEAT EXCHANGERS (OUTDOOR) AIR / WATER HEAT EXCHANGERS (INDOOR)

AIR CONDITIONER SIZES mm AIR CONDITIONER SIZES mm

SPECIFIC HEAT POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE COOLING POWER SUPPLY WIDTH HEIGHT DEPTH FAN FLOW POWER WEIGHT REFERENCE
TRANSMISSION(W/K) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO CAPACITY(W) V-ph-Hz (m3/h) CONSUMPTION(W) Kg NO
60 230-1-50/60 365 1090 110 860 230 16 XVH60 00 3201 000 2200 230-1-50/60 400 925 205 330 575 20 EXW15 00 220
100 230-1-50/60 485 1260 152 1350 490 28 XVHA0 00 3201 000 6700 230-1-50/60 501 1101 300 1450 215 39 EXW50 00 220
160 230-1-50/60 600 1260 152 1350 980 41 XVHA5 00 3201 000 17500 230-1-50/60 800 2000 600 2365 170 90 EXWA5 00 220
25000 230-1-50/60 800 2000 600 4730 340 95 EXWB0 00 220

170 171
 ENCLOSURE AIR-CONDITIONING ENCLOSURE AIR-CONDITIONING
HEATERS THERMAL CONTROL PRODUCTS

ENCLOSURE HEATERS FAN THERMOSTATE

Heater device : PTC semi-conductive Sensor device : Bimetallic thermostate

Heating body : Eloxal aliminium profile Protection category : IP20

Body temperature : 75-130 oC Reference no : 983.011 (1 pcs)

Protection category : IP 20 In line with the CE norms.

Combination : with two 0,75- 1,50m2 screw terminal. Mounting on 35mm DIN rail.

110-230 V AC/DC 0,75 - 1,50 mm2 combination

In line with the CE norms. Normally opened swtich (NO)

Mounting on 35mm DIN rail with a clip-on. 110-230 V AC/DC 10A

HEATER SIZE mm
POWER (W) BODY WIDTH HEIGHT DEPTH REFERENCE HEATER THERMOSTATE
HEAT NO
20 85 82 65 42 984.100 Sensor device : Bimetallic thermostate
30 85 82 75 42 984.200
50 85 82 85 42 984.300 Protection category : IP20
75 125 82 105 42 984.400
Reference no : 983.012 (1 pcs)
100 125 82 120 42 984.500
125 125 82 150 42 984.600 In line with the CE norms.
150 125 82 190 42 984.700
Mounting on 35mm DIN rail.

0,75 - 1,50 mm2 combination

Normally closed swtich (NC)

ENCLOSURE HEATERS WITH FAN
110-230 V AC/DC 10A
Heater device : PTC semi-conductive

Heating body : Eloxal aliminium profile

Body temperature : 120 oC

HYGROSTAT
Protection category : IP 20
Sensor device : Bimetallic thermostate
Combination : with 2,5mm2 screw terminal.
Protection category : IP20
110-230 V AC/DC
Reference no : 983.013 (1 pcs)
In line with the CE norms.

Mounting on 35mm DIN rail with a clip-on. In line with the CE norms.

HEATER SIZE mm Mounting on 35mm DIN rail.

POWER (W) BODY WIDTH HEIGHT DEPTH REFERENCE
2,5mm2 combination.
HEAT NO
300-600 120 82 180 110 984.101 Both open and closed switch (NO/NC)

For simultaneous cooling and heating applications.

110-230 V AC/DC
172 173
 GENERAL ACCESSORIES GENERAL ACCESSORIES

LIGHTINING ACCESSORIES Page 176-177

GROUP POWER SOCKETS Page 178-179

LOCK ACCESSORIES Page 180-182

MOUNTING ACCESSORIES Page 183-187

174 175
 GENERAL ACCESSORIES GENERAL ACCESSORIES
LIGHTING ACCESSORIES LIGHTING ACCESSORIES

LED LIGHT ENCLOSURE LAMP

(SCREWED/TYPE) DOOR LAMP SWITCH

230V AC 6W 230V, 3A, IP65 protection

2 pcs of socked plugs+switch cable Without cable

Reference number : 901.110 Reference number: 902.110 (1 pcs)

Required : Can only be used in Teos series, Neo and Neo MB enclosures.
switch bracket is needed for the switch mounting.
Please see page 105

LED LIGHT ENCLOSURE LAMP

(MAGNETIC/TYPE)
230V AC 6W DOOR LAMP SWITCH
2 pcs of socked plugs+switch cable (MINI SWITCH)
Reference number : 901.120 230V

Without cable

Reference number : 902.100 (1 pcs)

LED LIGHT ENCLOSURE LAMP (FLAT /TYPE)

230V AC 8W

Reference number : 901.130 - 5W

901.140 - 7W

176 177
 GENERAL ACCESSORIES GENERAL ACCESSORIES
GROUP POWER SOCKETS GROUP POWER SOCKETS

GROUP POWER SOCKETS (STANDARD)

GROUP POWER SOCKETS (WITH SWITCH)
The sockets fixes into aluminium inlet
The sockets fixes into aluminium inlet
230V AC, 10/16A
Earthed socket constructes 230V AC 10/16A

2 meter 3x1,5 TTR cable and plug ON/OFF switch

Place contact with our customer service as to you special
requirements Earthed socket constructes

2 meters 3x1,5 TTR cable and plug

Place contact with our customer service as to you special

requirements
Output Socket Qty. SocketType 19” Compatibility L1(mm) L2(mm) L3(mm) Reference No
6 Network 375 393 354 990.200
7 Network 420 438 399 990.201
8 Network *** 465 483 444 990.202
9 Network 510 528 489 990.203
Output Socket Qty. Socket Type 19” Compatibility L1(mm) L2(mm) L3(mm) ReferenceNo
6 UPS 375 393 354 990.204
7 UPS 420 438 399 990.205 6 Network 420 438 399 990.216
8 UPS *** 465 483 444 990.206 7 Network *** 465 483 444 990.217
9 UPS 510 528 489 990.207 8 Network 510 528 489 990.218
9 Network 555 573 534 990.219
6 UPS 420 438 399 990.220
7 UPS *** 465 483 444 990.221
8 UPS 510 528 489 990.222
9 UPS 555 573 534 990.223

GROUP POWER SOCKETS (WITH FUSE)

The sockets fixes into aluminium inlet
230V AC, 10/16 A
16 A Fuse
Earthed socket constructes
2 meter 3x1,5 TTR cable and plug
Place contact with our customer service as to you special
requirements

Output Socket Qty. SocketType 19” Compatibility L1(mm) L2(mm) L3(mm) ReferenceNo
6 Network *** 465 483 444 990.208
7 Network 510 528 489 990.209
8 Network 555 573 534 990.210
9 Network 600 618 579 990.211
6 UPS *** 465 483 444 990.212
7 UPS 510 528 489 990.213
8 UPS 555 573 534 990.214
9 UPS 600 618 579 990.215

178 179
 GENERAL ACCESSORIES GENERAL ACCESSORIES
LOCK ACCESSORIES LOCK ACCESSORIES

PLASTIC HANDLE LOCK

SWING HANDLE LOCK (RAL 7035)
Double-bit is standard.
Locking from 3 points together with roddings.
For Ares series enclosures
Can be used in all series except encrypted Teos.
Reference number : 951.104 (1 pcs)
Standard as a switch type.

Material : Zinc + Ral 7035 coating

Reference No : 950.200 (1 pcs)

SPRING LOCK Required : Roddings proportional to the enclosure size.

Double-bit is standard.

For Dm series enclosures.

SWING HANDLE LOCK (NACRE PLATED)
Reference number: 951.100 (1 pcs) Locking from 3 points together with roddings.

Can be used in all series except Teos

Material : Zinc + macre plated

Reference No : Double-bit insert : 950.100
Triangle insert : 950.101
MINI HANDLED LOCK
Reference number : 951.102 (1 pcs)

METAL SPRING LOCK

Made from zinc, double-bit insert.

Reference number : 951.200 (1 pcs)

HANDLE LOCK
Made from zinc

Reference number : 951.205 (1 pcs)

180 181
 GENERAL ACCESSORIES GENERAL ACCESSORIES
LOCK ACCESSORIES MOUNTING ACCESSORIES

INSERTS
TERMINAL / MCB RAIL
Plastic handle lock, spring lock and metal spring lock
Material : 1,00 mm mild steel + zinc-coated.
Reference No : 6,50 mm triangle insert : 951.211 (1 pcs)
7 mm square insert : 951.212 (1 pcs) Reference No : H 7,50 mm : 990.102 (2 m)
H 15,00 mm : 990.100 (2 m)

KEYS
Reference No : Double-bit plastic : 952.100 MCB BLANK PANEL
Double-bit metal : 952.101
6,50 mm triangle insert : 952.200 (1 pcs) Material : ABS Plastic
7 mm square insert : 952.201 (1 pcs)
175 mm length, 12 parts

Reference No : 990.101 (1 pcs)

KEYS (ENCRYPTED)
Reference No : 5333 For DM, DT, HC, RC, PC : 952.300 (1 pcs)
KNITTED EARTHING CABLE
Material : Copper + Tin-plating

Reference No : (DM) M5 screw-perforation 163 mm : 991.200 (10 pcs)

(Ares DT) M5 screw-perforation 260 mm : 991.201 (10 pcs)
(Teos) M8 screw-perforation 260 mm : 991.202 (5 pcs)
Knitted Flex earthing cable 163 mm : 991.205 (1 pcs)
Knitted Flex earthing cable 260 mm : 991.204 (1 pcs)

UNIT COMBINATION GASKET

Material : Polyethylene 10x3mm

Reference No : 992.100 ( 1 pocket / 5,60 m )

182 183
 GENERAL ACCESSORIES GENERAL ACCESSORIES
MOUNTING ACCESSORIES MOUNTING ACCESSORIES

WALL BRACKET PLASTIC PLAN POCKET

Relevance : KT, Ares
Material : ABS RAL 7035
Material : 2,50 mm mild steel + zinc-coated.
Reference No : A4 Size : 994.400
Supply includes : 4 pcs wall bracket, combination screws B5 Size : 994.500

Reference No : 971.100

WALL BRACKET
Relevance : DM SPRAY RETOUCH PAINT RAL 7035
Material : 2,5 mm Mild Steel + Zinc coated
Reference No : 996.200 (1 pcs)
Supply includes : 4 pcs wall bracket, gasket, M8 connection screws

Reference No : 971.200

COMBINATION ANGLE
Material : 4.00 mm mild steel + zinc-coated. STAINLESS STEEL MAINTENANCE SPRAY
Supply includes : 2 pcs support angle
Reference No : 996.400
Only for DT series.

Reference No : 970.300

CASTOR SET 50 mm and 80 mm

Supply includes : 2 pcs castor with brakes, 2 pcs castor without brakes,
all of them are rotating

Reference No : 50 mm 995.501
80 mm 995.502

184 185
 GENERAL ACCESSORIES GENERAL ACCESSORIES
MOUNTING ACCESSORIES MOUNTING ACCESSORIES

M5x10 SELF TAPPING M6 SCREW NUT SET

Self topping screw can top 4.50 mm holes Screw set used for mounting 19’’ equipments on the profile with cage
nut and M6x 15 screw.
Reference No : 993.105 (100 pcs)
Supply includes : 100 pcs M6 cage nut, 100 pcs plastic
washer ring, 100 pcs M6X 15 screw

Reference No : 993.420

M5x15 HEXAGON SELF TAPPING SCREW

Self topping screw can top 4.50 mm holes

Reference No : 993.107 (100 pcs) M6 STOPPER SCREW

Used on rear and side panels of Teos series. Self-stopping structure
and prevents panel overtigthtening.

Reference No : 993.322 (16 pcs)

SELF-DRILLING SCREW

Self-drilling steel screw

Reference No : 993.106 (100 pcs)

M12 x 30 SCREW and WASHER SET

It ise used in enclosure baying and fiting on plinth

Supply includes : 4 pcs screw and washer

M6 CAGE NUT
Reference No : 993.108 (4 set)
Nut used for mounting rear sheet steel in size 8,50 X 8,50 mm – 9,50 mm
square perforations.

Reference No : 994.160 (100 pcs)

M6 HIDE NUT
Used for mounting the support rails and mounting rails on the enclosure. Mounted
on the closed and open profiles from the front surface, 9,50x9,50 mm square
perforations.

Reference No : 994.170 (100 pcs)

186 187
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
KT SERIES DM SERIES

28 28

35 60

30
20,7

35
70
B B

H1
16 16

H
A A

H1
26
10,6

H
4,60

W1
W1
15,4

W
45

14
40

W
15,70

D
21
30

40

D
99,4

43 53

SECTION A-A

ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE

WIDTH W W1 DEPTH D HEIGHT H H1 WIDTH W W1 DEPTH D HEIGHT H H1
200 200 180 120 120 200 200 165 200 200 150 150 150 300 300 240
300 300 280 120 120 300 300 265 300 300 250 200 200 400 400 340
400 400 380 120 120 400 400 365 400 400 350 280 280 500 500 440
500 500 480 120 120 500 500 450 600 600 540
600 600 580 120 120 600 600 550 800 800 640
800 800 750 1000 1000 740
1000 1000 950

188 189
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
DM SERIES DM SERIES

28 28
28
28

28
B B
B B

H1
H

H1
W1
W

W1
14

W
D

14
43 53

D
SECTION B-B

53 45 45 53

ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE

WIDTH W W1 DEPTH D HEIGHT H H1 WIDTH W W1 DEPTH D HEIGHT H H1
200 200 150 150 150 300 300 240 200 200 150 150 150 300 300 240
300 300 250 200 200 400 400 340 300 300 250 200 200 400 400 340
400 400 350 280 280 500 500 440 400 400 350 280 280 500 500 440
500 500 450 600 600 540 500 500 450 600 600 540
600 600 550 800 800 640 600 600 550 800 800 640
800 800 750 1000 1000 740 800 800 750 1000 1000 740
1000 1000 950 1000 1000 950

190 191
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
DM SERIES ARES SERIES

94

60

28
28

28
28

28 28
28

A A A
A

H
H

H1
B B

H1
61 W1

60
W1
W
W
94

60

28
28

20
20
W W1

20 A 20 A 20 20
14

D
H1
D
D

20

22
20

22
48 56
48 56

53 45 97 53 SECTION A-A
SECTION A-A

61 W1

60
W

20
ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE
WIDTH W W1 DEPTH D HEIGHT H H1 WIDTH W W1 DEPTH D HEIGHT H H1
200 200 150 150 150 300 300 240 300
20 300 249 20 150 150 400 400 334
300 300 250 200 200 400 400 340 400 400 349 200 200 500 500 434

D
400 400 350 280 280 500 500 440 500 500 449 280 280 600 600 534
500 500 450 600 600 540 600 600 549 700 700 634
600 600 550 800 800 740 800 800 749 800 800 734

20

22
800 800 750 1000 1000 940 48 56 1000 1000 934
1000 1000 950 1150 1150 1084
SECTION A-A

192 193
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
TEOS SERIES TEOS SERIES

C C A
C A

5,5

5,5

5,5

73

73

73

73
73
5,5
5,5

5,5

73
5 75 70 70 70
70 70 75 75 75 75 70 70
75 70
H

H
H1

H1

H1

H1
H
H
50 50 50
50
50 50
50

50

50
73

73

73

50

5073
50
103/203

103/203

103/203

103/203
103/203
C B C

103/203
B B W1 W1
C
W1
B B B A A B B
B B

73
73
W1 W
5,505,5 5,50
D 5,50
5,5 D D5,5 5,5
B 5,50 5,50 D D 5,5 5,5
W1
5,5
W 5,5
5,5 W W5,5
5,5 W
5,5 5,5 5,5 W W 5,505,5 5,5 D 5,5
SECTION C-C SECTION C-C
SECTION C-C
W3 W3 W3 SECTION C-C SECTIONSECTION
A-A A-A
W3

W3 W3 W3 W3
D1

D1

D1
D2

D1
D2

D1
D2

D1
D2

W2 W2
W2 W2 W2
W2
SECTIONSECTION
B-B B-B
ON B-B SECTION B-BSECTION B-B SECTION B-B

ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE

WIDTH W W1 W2 W3 DEPTH D D1 D2 HEIGHT H H1 WIDTH W W1 W2 W3 DEPTH D D1 D2 HEIGHT H H1
400 400 - 320 151 400 400 320 203 1200 1200 1088 400 400 - 320 151 400 400 320 203 1200 1200 1088
500 500 388 420 251 500 500 420 303 1600 1600 1488 500 500 388 420 251 500 500 420 303 1600 1600 1488
600 600 488 520 351 600 600 520 403 1800 1800 1688 600 600 488 520 351 600 600 520 403 1800 1800 1688
700 700 588 620 451 700 700 620 503 2000 2000 1888 700 700 588 620 451 700 700 620 503 2000 2000 1888
800 800 688 720 551 800 800 720 603 2200 2200 2088 800 800 688 720 551 800 800 720 603 2200 2200 2088
1000 1000 888 920 444,5x2 1000 1000 888 920 444,5x2
1200 1200 1088 1120 544,5x2 1200 1200 1088 1120 544,5x2

194 195
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
DT SERIES STAINLESS STEEL DT SERIES STAINLESS STEEL

ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE ENCLOSURE

WIDTH W W1 W2 DEPTH D D1 HEIGHT H H1 WIDTH W W1 W2 DEPTH D D1 HEIGHT H H1
600 590 480 440 400 390 240 1200 1190 1084 600 590 480 440 400 390 240 1200 1190 1084
800 800 698 650 500 490 340 1600 1600 1494 800 800 698 650 500 490 340 1600 1600 1494
1000 990 888 840 600 590 440 1800 1800 1694 1000 990 888 840 600 590 440 1800 1800 1694
1200 1190 1088 1040 800 790 640 2000 1990 1884 1200 1190 1088 1040 800 790 640 2000 1990 1884
2200 2200 2094 2200 2200 2094

196 197
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
KMT-1000 SERIES KMT-2000 SERIES

B 65 B 53
0
D D
63 63 42
48 48 3
6 6
37 37
9 9 36 36 36
36
36 36 36
36

755
1029,4

1029,4

1030

950
941

1030
1030

1030

950
941
755
951,5

840

951,5

555

589
632
589
43 56 43 56

589

632
632
632

53
53 53 53 53 53
14,50 14,50

W1 W1
W1
B
B
100/200

100/200
D
W 350 W
W 350 26 400 26
W
26

B 65
53
D 0
63 42
48 3
6
37
9
36 36
36

755
1029,4

1030

950
941
1030

951,5

840

755
555

589
Rear mounting plate

632

555
589

43 56
Front mounting plate
632

53
14,50

W1 W1
W1
B
100/200

D
W 350 W
26 400 26
ENCLOSURE ENCLOSURE
WIDTH W W1 WIDTH W W1
600 600 540 600 600 498
800 800 740 800 800 698
1000 1000 940 1000 1000 898
1200 1200 1140 1200 1200 1098

198 199
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
KMP-3000 SERIES PC CABINET

A 350
F 350

20

24,50

20
360

308
385

308

390
385

390
36 36 36 64,50 261 36 261

322

583
381,50

1200
381,5

62
1200

954
954

954
410,63
410
52,94

180
53 54 150

954
555
555

570
53

570
514

555

1900

150
555
100/200
W1 W1
A

1257
100/200

1037
F
W1 W1
W 26 450 26
W 26 450 26,21

350
SECTION F-F
24,50

SCALE 1 : 10
20

100
B B
308
390

385
36 261
W 19 D 41

381,5
62
1200

954

954
410,63
Rear mounting plate
75 W1
54
555

ENCLOSURE
570

WIDTH W W1
555

75
Front mounting plate
600 590 440
100/200

D1
W1 W1 ENCLOSURE
DEPTH D D1
600 590 440
800 790 640
26 450 26,21 ENCLOSURE
WIDTH W W1

SECTION F-F 600 600 498

SCALE 1 : 10 800 800 698

1000 1000 898
1200 1200 1098

200 201
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
ENCLOSURE AIR-CONDITIONERS ENCLOSURE AIR-CONDITIONERS

ETE 20 EVO 07

ETE 41 EVO 14 - EVO 20

202 203
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
ENCLOSURE AIR-CONDITIONERS ENCLOSURE AIR-CONDITIONERS

EXW15
EVO 41

EXW50

EXWA5 - EXWB0

204 205
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
ENCLOSURE AIR-CONDITIONERS ENCLOSURE AIR-CONDITIONERS

XVA35 XVA80

206 207
 TECHNICAL DRAWINGS TECHNICAL DRAWINGS
ENCLOSURE AIR-CONDITIONERS ENCLOSURE AIR-CONDITIONERS

XVHA0 XVHA5
XVH60

208 209
 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
MATERIAL INFORMATION MATERIAL INFORMATION

INFORMATION ON STEEL USED IN OUR PRODUCTS PLATING APPLICATIONS

MILD STEEL : 6112 DIN EN 10130-99-DCO1

Process-exposed, multiple-perforated, non-coated parts are
GALVANIZED STEEL : 1311 DIN EN 10142-00 DX51 D+Z manufactured from mild steel and plated with (Cr+3) zinc. If
these parts are galvanized without plating, perforated or cut
STAINLESS STEEL : Standard use: AISI 304 (1.4301 BS EN 10088 ) areas on the parts can corrode. Therefore, these types of
Optional use: AISI 316 (1.4401 BS EN 10088 ) parts (mounting rail etc) are zinc-plated.
ALIMINIUM SHEET : AIMg3
(Optional )

SEALING AND GLASS GLUEING APPLICATION

PRODUCT COATING APPLICATION

Pressurized Spray Cleaning Line

Degreasi Phosphate-plating Rinsing Deionized Passivation

For water and dust impermeability, we use polyurethane liquid

gasket in our products.

Operating between -40 °C and +100 °C, this gasket is used

in liquid form. It provides a high protectionin continental
climates, production sites where temperatures can be high
and applications of heat-radiating devices.

Coating Drying Glass glueing is done with CNC machine and this allows
for strong adhesion. Thus, dust and liquid impermeability
provides IP 54 protection on the glazed surface.
70-90 μm epoxy
polyester powder coating
Owening Draining

8-10 μm phosphate

Material

214 215
 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
PACKAGING IP PROTECTION CATEGORY ACCORDING
TO IEC 60 529

PACKAGING FOR FLOOR ASSEMBLED

PACKAGING FOR First Characteristic Protection Number Against Foreign Materials
TYPES, KMT, KMP, PC and HC SERIE IP 5 5
COMPACT ENCLOSURES ENCLOSURES First Explanation Definition
Number

First Protective against 50mm (in A shaft or ball of 50mm diameter should
Characteristic 1 diameter) or bigger solid materials not completely enter. (a)
Number
Protective against solid materials A shaft or ball of 12,5 mm diameter
Second 2
Characteristic of 12,5mm diameter or more should not completely enter. (a)
Number
Protective against solid materials A shaft or ball of 2,5 mm diameter should
3
of 2,5mm diameter or more not completely enter. (a)

Protective against solid materials A shaft or ball of 1,0 mm diameter should

4 of 1,0mm diameter or more not completely enter. (a)

There might be a small amount of dust

5 Dust-resistant
input. Should not harm device security

No dust should enter into the enclosure in

6 Dust-resistant
20mbar pressure applications

DT FLAT PACKAGING TEOS FLAT PACKAGING

Second Number for Characteristic Water-Resistance

Second Explanation Definition

Number
Water drops falling at straight angles should not have any
Resistant to Water Drops from straight anglesı
1 harmful impact.
Resistant to water drops falling with a straight When the enclosure is 15 degrees biased, water drops falling
2 angle when the enclosure is 15 degrees biased from both sides should not give any harm.

Water-injection coming from both sides at 60 degrees should

3 Resistant to water injection not leave any damage.

4 Water-splash-resistant Resistance to water splashes from all angles

Flat package products are packaged by Should provide resistance to low-pressure water jet
ACCESSORY PACKAGING 5 Water-jet-resistant from all angles.
automatic packaging machine.
Resistant to pressurized water-jet No dust should enter in the enclosure in 20mbar pressure
6 applications.

7 Resistance to temporary water-immersion Temporarily immersed in water under standard duration and
pressure conditions, the enclosure should not be damaged.

Permanently immersed in water under standard duration and

8 Resistance to permanent water-immersion
pressure conditions, the enclosure should not be damaged

216 217
 TECHNICAL SPECIFICATIONS

UL NEMA STANDARDS SHEET

PROTECTION EXPLANATION ACCORDING TO UL NEMA STANDARDS
UL/NEMA
Type EXPLANATION
1 Indoor enclosures should have protection against foreign materials

3 Enclosures frequently used indoors should have protection against the harmful effects of solid
materials, rain, dust and frosting.

3R Enclosures frequently used indoors should have protection against the harmful effectsof solid
materials, rain, dust and frosting

3S Enclosures frequently used indoors should have protection against solid materials, rain, dust
and snow. Outer mechanisms of the enclosure should be protective against frosting.

4 İ Indoor or outdoor enclosures should be protective against rain, foreign materials, water
splashes, hosing as well as external frosting.

4X İ Indoor or outdoor enclosures should be protective against rain, foreign materials, water
splashes, hosing as well as external frosting.

12, 12 K Enclosures frequently used indoors should have protection against foreign materials,
non-corrosive liquid drops, dust settling.

13 Enclosures frequently used indoors should have protection against dust settling, water
splashes, oil and non-corrosive cooling liquids or gases.

CABLE GLAND SELECTION SHEET

SELECTION TABLE FOR CABLE GLANDS TO PG SIZE

PG Cable Assembling
Diameter(mm) Hole(mm)

11 5 _10 18.5
13.5 6_12 20.5
16 10_14 22.5
21 13_18 28.5
29 18_25 37.5
36 22_32 47
42 32-38 55
48 37-44 60

218