320D3

Hydraulic Excavator

Lower your cost per hour. The Cat® 320D3 Excavator balances productivity, efficiency, and reliability to deliver you a reliable,
highly efficient, low-cost-per-hour excavator for your work.

HIGH RELIABILITY LOWER FUEL CONSUMPTION

• Optimized HD Boom and Stick for longer life in quarry application. • Up to 10% less fuel consumption than the previous 320D3 model in
• Two robust undercarriage choices providing optimized stability similar applications. Economy mode further reduces fuel consumption
based on bucket selection. with no loss in lifting or digging forces.
• Proven 6-cylinder mechanical engine with no electronic control • Save even more by using the Economy mode. Speed will reduce,
module. but with no loss in lifting or digging forces. See savings of up to 20%.
• We designed the Stick and Boom structures using high-tensile steel • Boom and Stick regeneration circuits reduce fuel consumption by
fabricated into a large box section using internal baffles to absorb up to 2% while improving cycle times.
torsional stress. The single plate X-shaped, box-section car body • Use automatic engine speed control (AEC) during no-load or
provides excellent resistance to torsional bending, dissipating light-load conditions to automatically reduce engine speed to
stress throughout the base of the machine. minimize fuel consumption.
• Robust bottom guards protect machine components that might be • Standard one-touch low idle saves fuel by instantly reducing engine
damaged while swinging. A thicker bottom guard plate is used under speed to 1,000 rpm at the push of a button. Return the engine speed
the pump compartment to protect the suction hose. to the throttle position by hitting the button again or simply moving
• Traverse the job site on the Grease Lubricated Track (GLT) the joysticks.
undercarriage. Undercarriage rollers are rebuildable and sealed • Electronic Tandem hydraulic pumps deliver up to 7% more
to prevent dirt and debris from causing internal wear. Grease efficiency with less internal friction losses and superior design.
lubricated links minimize internal bushing wear, reducing noise Each pump can produce a maximum flow of 214.5 L/min (56.7 gal/
and increasing life up to 25%. min). Hydraulic system components are close together to minimize
• Hydraulic snubbers in the boom and stick cylinders dampen power loss from friction and pressure drops.
end-of-stroke impact prolonging the life of your machine. • Optional Fuel Flow meter aids in reporting the fuel consumption
• Expect reliable performance from the double-filtered low-pressure through VisionLinkTM.
fuel system and antirust fuel tank protects the engine from lower
quality fuel.
• Thick braiding protects the colored, numbered electrical wires.
Non-abrasive connectors keep wiring harnesses in place to
prevent failure.
320D3 Hydraulic Excavator

LOWER MAINTENANCE COSTS WORK IN COMFORT

• Up to 15% lower maintenance costs than the first generation • The updated spacious cab design provides excellent visibility from
of 320D3 models, with advanced hydraulic oil filter design and the operator’s seat to keep you aware of your surroundings – without
reduced number of filters. bending or straining to see.
• Hydraulic system does not require a pilot filter, eliminating a filter • In-cab high-resolution 203 mm (8 in) touch screen display are easy
that had to be changed frequently. to use, intuitive and user-friendly.
• Updated hydraulic filter design. Preventing oil contaminants • Work a full day with less fatigue using the ergonomically designed
entering the system during filter change no longer requires a electro-hydraulic joysticks matched to operator’s wrist and arm
capsule design. position. Joystick consoles can be adjusted, further improving
• Drain filter is replaced with a cleanable screen and magnet. operator comfort and productivity.
• Extended first engine oil change interval (500 hours), and • Easy to access radio controls, engine throttle, wiper controls and
maintenance-free batteries. Bluetooth ® phone pairing for operator convenience.
• A two-stage fuel filtering system with integrated water separator • Improved automatic climate control helps maintain consistent cab
protects the engine from particles larger than four microns when temperature. Five outlets ensure proper air circulation to keep you
fuel quality is less than ideal. comfortable regardless of outside temperatures.
• There is no need to manually prime the fuel system after fuel filter • Ergonomically designed seat to improve operator’s comfort. Wide
changes. The standard electric priming pump reduces the risk of adjustable armrests and retractable seatbelt are also included.
contamination by preventing unfiltered fuel from entering the • Standard cab equipment to enhance operator comfort and
fuel system. productivity, the cab includes a radio, lighter, drink holder, coat
• Easily maintain your machine. Most service locations are easily hook, service meter, literature holder, magazine rack and storage
accessible at ground level for quick, efficient servicing. to allow compartment.
service and maintenance to get completed quickly and efficiently. • Keep your phone or other personal electronics charged using the
A service door on the right side of the upper structure allows 24V auxiliary power ports delivering up to 5A of power.
ground-level access to the hydraulic pumps, hydraulic filters, • There is plenty of room for you to store your gear. There are two
engine oil filter, and fuel filters. storage locations at the rear of the right console and one space
• Proven, high-efficiency radial seal engine air filter behind the cab. for your lunchbox behind the seat.
The machine constantly monitors the engine air filter and will notify
you, via the monitor, when service is required.
BUILT-IN SAFETY FEATURES
• A remote greasing block on the boom allows the greasing of
hard-to-reach locations. A remote mounted greasing point on • We designed the cab to provide excellent visibility from the
the swing bearing allows ease of service. operator’s seat. In addition, two standard mirrors help keep you
aware of your surroundings.
• VisionLink™ comes standard so you can remotely monitor machine
health, location, hours, and absolute fuel level on demand through • The machine provides you a work platform for all routine service
the online interface. and maintenance needs. Anti-skid plating with countersunk bolts
reduces the potential for slippage and trip hazards.
• Grips on the track frame, service platform, cab and battery
PERFORMANCE compartment for an easy climb up and down from the
• Powerful 6-cylinder engine. service platform and operator station.
• Choice of bucket to match your application, with an optional larger • Handrails and hand hold are provided for easy access.
Cat Bucket 1.14 m³ (1.49 yd 3) General-duty resulting in increased • Optional rearview cameras with additional mirror enhance
performance. visibility behind the machine.
• Electrohydraulic control valve, pump and Electronic Control • Optional Rollover Protective Structure (ROPS) compliant cab
Module (ECM) introduced for better controllability and lower is now available.
fuel consumption. • Ground level access to engine secondary shut-off feature.
• Dig and lift from a stable platform created by the heavy-duty • The hydraulic lockout lever prevents operators from leaving
counterweight and eight-roller undercarriage. the cab without first isolating all hydraulic functions.
• The excavator has a high-ambient capability of 52° C (125° F) and • A lockable disconnect switch isolates the battery and enhances
cold start capability of –18° C (0° F). An optional –32° C (–25° F) safety by disconnecting the electrical energy when servicing
cold start package is available. the machine.
• Add versatility by adding tool control to run a hammer or other tools • A full-length firewall separates the engine from the hydraulic pump
requiring one-way flow. Order tool control with the machine or add and offers protection in the event of an incident.
it later with a dealer-installed kit.
• The machine can be equipped with a Operator Protective Guards
• Balance power and efficiency using the open-center, positive flow (OPG) that conforms to the ISO 10262:1998 standard. These guards
control electro-hydraulic system. are bolted directly to the cab shell.
• Hydraulic cross-sensing makes full engine power always available
from hydraulic pumps regardless of which function is used.
• HD boom and HD sticks allow durable performance.

2
 320D3 Hydraulic Excavator

Standard and optional equipment may vary. Consult your Cat dealer for details.
Standard Optional Standard Optional
UNDERCARRIAGE AND STRUCTURES BOOM AND STICK
600 mm (24 in) triple grouser shoes  5.7 m (18'8") HD Reach boom 
(10 mm/0.4 in thick) 2.5 m (8'2") HD Reach stick 
Grease lubricated track links  ELECTRICAL SYSTEM
Tie down points on base frame  Two 750 CCA maintenance free batteries 
Center track guiding guard  LED chassis and cab lights 
Segmented track guiding guard  LED left-side boom light 
3650 kg (8,050 lb) counterweight 
SERVICE AND MAINTENANCE
4250 mm (13'11") long undercarriage 
Grouped engine oil, fuel, and hydraulic 
4080 mm (13'5") standard undercarriage  oil filters
ELECTRICAL Scheduled Oil Sampling (S·O·SSM) ports 
LED right-side boom light  Radiator screen for radiator/oil cooler 
CAT TECHNOLOGY HYDRAULIC SYSTEM
VisionLink  Electronic main control valve, hammer ready 
CAB Back-to-back electronic pump 
Sound suppressed cab with viscous mounts  Boom and stick regeneration circuits 
High-resolution 203 mm (8") LCD  Automatic hydraulic warm up 
touchscreen monitor Automatic two-speed travel 
Mechanically adjustable seat with headrest  High performance hydraulic return filter 
Automatic bi-level air conditioner  Hammer lines 
Keyless push-to-start engine control  Hammer return filter 
1-button joystick  SAFETY AND SECURITY
AM/FM radio with USB and auxiliary port  Anti-skid plating with countersunk bolts 
24V DC outlet  Handrail and handhold 
Cup holder and storage compartments  Lockable external tool/storage box 
70/30 tempered glass windshield  Signaling/warning horn 
Upper radial wiper with washer  Hydraulic lockout lever 
Openable steel hatch  ROPS 
Dome light  OPG with matching lights 
Washable floor mat  Rearview camera 
ENGINE Travel alarm 
Diesel engine, ALUW06DTI/8 – mechanical 
governor – emits equivalent to U.S. EPA
Tier 2, noncertified
Two selectable power modes: Standard, Eco 
One-touch low idle with auto engine speed 
control
Two stage fuel filtration system with water 
separator and indicator
52° C (125° F) high-ambient cooling capacity 
4000 m (13,120 ft) altitude capability 
Radial seal air filter with double filter 
element
–32° C (–25° F) cold start capability 
Air pre-cleaner 
Fuel flow meter 
Biodiesel capability (up to B10) 

3
320D3 Hydraulic Excavator

Technical Specifications

Engine Dimensions
Engine Model ALUW06DTI Boom HD Reach 5.7 m (18'8")
Biodiesel Capability Up to B10 Stick HD Reach 2.5 m (8'2")
Emissions Noncertified emission engine Bucket GD 1.14 m³ (1.49 yd³)
Net Power – ISO 9249 92 kW 123 hp Shipping Height – top of cab 3050 mm 10 ft
Net Power – ISO 9249 (DIN) 125 hp (metric) Handrail Height 3015 mm 9.11 ft
Engine Power – ISO 14396 100 kW 134 hp Shipping Length 9530 mm 31.3 ft
Engine Power – ISO 14396 (DIN) 136 hp (metric) Tail Swing Radius 2750 mm 9 ft
Bore 104 mm 4 in Counterweight Clearance 1020 mm 3.4 ft
Stroke 113 mm 4 in Ground Clearance 450 mm 1.6 ft
Displacement 5.8 L 351 in³ Track Length 4250 mm 13.11 ft
• Non-certified emission engine. Length to Center of Rollers 3450 mm 11.3 ft
• Recommended for use up to 4000 m (13,120 ft) altitude with engine power Track Gauge 2380 mm 7.1 ft
derate above 3000 m (9,840 ft).
Transport Width 2980 mm 9.9 ft
• Advertised power is tested per the specified standard in effect at the time
of manufacture. Working Ranges and Forces
• Net power advertised is the power available at the flywheel when the engine Boom HD Reach 5.7 m (18'8")
is equipped with fan, air intake system, exhaust system and alternator.
Stick HD Reach 2.5 m (8'2")
• Engine speed at 1,700 rpm.
Bucket GD 1.14 m³ (1.49 yd³)
Hydraulic System
Maximum Digging Depth 6300 mm 20.8 ft
Main System – Maximum Flow 429 L/min 113 gal/min
Maximum Reach at Ground Level 9470 mm 31.1 ft
Maximum Pressure – Equipment 35 000 kPa 5,075 psi
Maximum Cutting Height 9250 mm 30.4 ft
Maximum Pressure – Travel 35 000 kPa 5,075 psi
Maximum Loading Height 6290 mm 20.8 ft
Maximum Pressure – Swing 25 000 kPa 3,625 psi
Minimum Loading Height 2590 mm 8.6 ft
Swing Mechanism Maximum Depth Cut for 2440 mm (8 ft) 5960 mm 19.7 ft
Swing Speed 11.88 r/min Level Bottom
Maximum Swing Torque 62 kN·m 45,581 ft·lbf Maximum Vertical Wall Digging Depth 5720 mm 18.9 ft
Weights Bucket Digging Force – ISO 135 kN 30,350 lbf
Operating Weight 21 000 kg 46,300 lb Stick Digging Force – ISO 118 kN 26,530 lbf

Service Refill Capacities

Fuel Tank Capacity 350 L 92.5 gal
Cooling System 19 L 5 gal
Engine Oil 18 L 4.8 gal
Swing Drive – each 6L 1.6 gal
Final Drive – each 5L 1.3 gal
Hydraulic System – including tank 218 L 57.6 gal
Hydraulic Tank 115 L 30.4 gal

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEXQ3663-01 (01-2024)
© 2024 Caterpillar Replaces AEXQ3663-00
All rights reserved (India)
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment.
See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, Advansys, S•O•S, Product Link, SmartBoom, “Caterpillar Corporate
Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks
of Caterpillar and may not be used without permission.

VisionLink is a trademark of Caterpillar Inc., registered in the United States and in other countries.