Sri Chaitanya IIT Academy.,India.

 A.P  T.S  KARNATAKA  TAMILNADU  MAHARASTRA  DELHI  RANCHI

A right Choice for the Real Aspirant
ICON Central Office - Madhapur - Hyderabad
Sec:Sr.Super60_NUCLEUS & STERLING_BT Paper -1(Adv-2020-P1-Model) Date: 27-08-2023
Time: 09.00Am to 12.00Pm RPTA-04 Max. Marks: 198
27-08-2023_Sr.Super60_NUCLEUS&STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Syllabus
PHYSICS : General Physics: General Units and dimensions, dimensional analysis; least count,
significant figures; Methods of measurement and error analysis for physical quantities
pertaining to the following experiments: Experiments based on using Vernier calipers
and screw gauge (micrometer), Determination of g using simple pendulum, Simple
Pendulum‐dissipation of energy by plotting a graph between the square of
amplitude and time, Metre Scale ‐ the mass of a given object by the principle of
moments,
Kinematics : Kinematics in one and two dimensions, Projectile motion, Relative
velocity.
CHEMISTRY : Benzene, Alkyl Halides & Aryl Halides: Benzene :Reactions of benzene, Structure and
aromaticity ; Electrophilic Substitution Reactions; halogenation, nitration,
sulphonation, friedel‐crafts alkylation and acylation; Effect of directing groups (mono
substituted benzenes) in these reactions. Alkyl halides & aryl halides: rearrangement
reactions of alkyl carbocation, Grignard reactions, nucleophilic substitution reactions;
Haloarenes :Fittig, Wurtz‐Fittig, nucleophilic aromatic substitution in haloarenes and
substituted haloarenes (excluding Benzyne mechanism and Cine substitution).
MATHEMATICS : Indefinite Integration

Name of the Student: ___________________ H.T. NO:

 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
JEE-ADVANCE-2020-P1-Model
Time: 3:00Hour’s IMPORTANT INSTRUCTIONS Max Marks: 198
PHYSICS:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs mark
Sec – I(Q.N : 1 – 6) Questions with Single Correct Choice 3 -1 6 18
Questions with Multiple Correct
Sec – II(Q.N : 7 – 12) 4 -2 6 24
Choice +1 partial marks
Questions with Numerical Value
Sec – III(Q.N : 13 – 18) 4 0 6 24
Answer Type
Total 18 66

CHEMISTRY:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs marks
Sec – I(Q.N : 19 – 24) Questions with Single Correct Choice 3 -1 6 18
Questions with Multiple Correct
Sec – II(Q.N : 25 – 30) 4 -2 6 24
Choice +1 partial marks
Questions with Numerical Value
Sec – III(Q.N : 31 – 36) 4 0 6 24
Answer Type
Total 18 66

MATHEMATICS:
+Ve - Ve No.of Total
Section Question Type
Marks Marks Qs marks
Sec – I(Q.N : 37 – 42) Questions with Single Correct Choice 3 -1 6 18
Questions with Multiple Correct
Sec – II(Q.N : 43 – 48) 4 -2 6 24
Choice +1 partial marks
Questions with Numerical Value
Sec – III(Q.N : 49 – 54) 4 0 6 24
Answer Type
Total 18 66

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 2
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
PHYSICS Max Marks: 66
SECTION – I
(SINGLE CORRECT ANSWER TYPE)
This section contains SIX (06) questions.
• Each question has FOUR options. ONLY ONE of these four options is the correct answer.
• For each question, choose the option corresponding to the correct answer.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : -1 In all other cases
1. A particle is projected horizontally from an inclined plane with speed 10 m/s as shown in

figure. (g = 10 ms 2 ) choose the correct option

A) Range along inclination is 10 m

2
B) Time of flight is sec
3
C) Speed of particle when it strikes inclined plane is 15 m/s
D) Time of flight is 3 sec
2. A parachutist descends uniformly at a speed of 8 m/s in calm weather. What will the
terminal speed of the parachutist be if there is a 6 m/s crosswind in the horizontal
direction ?
A) 8 m/s B) 10 m/s C) 2 m/s D) 2 7 m/s
3. Four students Ram, Shyam, Ghanshyam and Radheshyam perform an optical bench
experiment to final focal length of a convex lens. Ram forms image of a distant luminous
object on a small screen mounted on the optical bench. Other 3 students perform usual
optical bench experiment. Their position of object needle, lens and image needle are
given below. Which of the student is most accurate in his result?
Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 3
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
Name Object Lens Image
Ram ----- 15.0 cm 30.0 cm
Shyam 15.0 cm 75.0 cm 95.0 cm
Ghanshyam 15.0 cm 45.0 cm 75.0 cm
Radheshyam 15.0 cm 60.0 cm 82.5 cm
A) Ram B) Ghanshyam
C) Radheshyam D) All are equally accurate
4. In the figure, the man is moving on the track and rain appeared to him as shown by
arrows. Find the actual speed of the rain in meter per second.

10 5
A) 10 3 B) C) 5 3 D)
3 3
5. A student uses a simple pendulum of exactly 1 m length to determine g, the acceleration
due to gravity. He uses a stopwatch with the least count of 1 sec for this and records 40
seconds for 20 oscillations. For this observation, which of the following statement is
TRUE?
A) Error T in measuring T, the time period is 0.05 seconds.
B) Error T in measuring T, the time period is 5%.
C) Error T in measuring T, the time period is 0.1 seconds.
D) Error T in measuring T, the time period is 1%.

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 4
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
6. Which of the following is a CORRECT statement?
A) 2.3056 + 10.138 – 7.4671 = 4.9765
B) 2.38  1.0  2.38
8.05
C)  2.6
3.1
D) 1.11  0.1  9.0  9.0
SECTION – II
(ONE OR MORE CORRECT ANSWER TYPE)
• This section contains SIX (06) questions.
• Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is(are) correct answer(s).
• For each question, choose the option(s) corresponding to (all) the correct answer(s).
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is(are) chosen;
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen, both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a correct option;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : -2 In all other cases
7. A perfectly elastic particle is projected with velocity v at an elevation  . A smooth plane
passes through the point of projection and is inclined at an angle  to the horizontal. The
particle will return to the point of projection provided cot  cot     is

A) 2 B) 2.5 C) 3 D) 4
8. The pitch of a screw gauge is 0.5 mm and there are 100 divisions on it’s circular scale.
The instrument reads 2 circular divisions when nothing is put in between its jaws. In
measuring the diameter of a wire, there are 8 divisions on the main scale and 83rd division
coincides with the reference line. Then choose the correct option(s).
A) Screw gauge is having zero error of –0.01 mm.
B) Screw gauge is having zero error of –0.49 mm.
C) Diameter of the wire is 4.405 mm.
D) Diameter of the wire is 4.425 mm.

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 5
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
9. Two point objects one sliding down from rest on a frictionless inclined plane of
inclination  with the horizontal the other being projected in air from the point O at an
angle  with horizontal start their motion at the same instant. Initially both point objects
are along the same vertical line. Both get to the point P at the same time and the same
speed. Then choose the correct option(s).

1 2
A) 2sin   B) 2cos   cos  C) sin   D) cos   2cos 
sin  sin 
10. Two resistors R1 and R2 have measured values as
R1  3.0   0.1 ; R2  6.0   0.2 
Then
A) Least count of device used to measure R2 must be 0.2
B) When connected in series the error will be 3.34%
C) When connected in parallel the error will be 0.1 (approx.)
D) When connected in parallel the error will be 0.2 (approx.)

11. If the dimensions of length are expressed as G xc y h z ; which G, c and h are the universal
gravitational constant, speed of light and Plank’s constant respectively then
1 1 1 1 1 3 3 1
A) x  , y  B) x  , z  C) y  , z  D) y   , z 
2 2 2 2 2 2 2 2

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 6
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
12. Focal length of a lens is determined by the u – v method using the optical bench.
A particular reading was (u = –50 cm; v = + 25 cm). The least count of the optical bench
is 1 mm. Find the maximum permissible percentage error for this measurement.
5 10 1.8 1
A) B) C) D)
3 3 150 3
SECTION – III
(NUMERICAL VALUE TYPE)
• This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
• For each question, enter the correct numerical value of the answer using the mouse and the on-screen virtual
numeric keypad in the place designated to enter the answer. If the numerical value has more than two decimal places, truncate/round-off the value to
TWO decimal places.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If ONLY the correct numerical value is entered;
Zero Marks : 0 In all other cases
13. In a car race, car A takes 4s less than car B at the finish and passes the finishing point
with a velocity v more than the car B. Assuming that the cars start from rest and travel

with constant acceleration a1  4ms 2 and a2  1ms 2 respectively, find the velocity of v

in ms 1 .
14. At normal incidence, a beam of light propagating in vacuum reflects off an interface with
a medium of refractive index n = 2.0. The fraction of energy reflected, R is given by
2
 n  1
R . If the fractional error in the value of n is 3%, the fractional error in the
 n  1
estimation of R is
15. A block is pushed onto a conveyor belt. The belt is moving at velocity v 0  1 m / s , the

block’s initial velocity u0  2 m / s is perpendicular to the belt’s velocity. During its

subsequent motion, what is the minimum velocity of the block with respect to the
ground? The coefficient of friction is large enough to prevent the block from falling off
2
the belt. If minimum velocity is . Find n =?
n

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 7
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
16. After being kicked by a footballer, a ball started to fly straight towards the goal at
velocity  = 25 m/s making an angle  = 370 with the horizontal. Due to side wind
blowing at u = 10 m/s perpendicular the initial velocity of the ball, the ball had deviated
from its initial course by s = 2 m by the time it reached the plane of the goal. Find the
time that it took the ball to reach the plane of the goal, if the goal was situated at distance

L = 32 m from the footballer. (Drag force of air is side ways g  10m / sec2 ) 
17. Two smooth slides lie within the same vertical plane and make angles  to the horizontal
(see the figure). At some moment, two small balls are released from points. A and B and
they start sliding down. It took time t1 for the first ball that started from point A to reach
the ground; for the second one the time of descent was t2 . At what time t was distance
between the balls the smallest?

If t1  5sec and t2  3sec . Find t =?

18. With what minimum velocity V, a stone should be thrown from the ground, such that it
touches the both ends of inclined plane. Given b = 20 m, a = 12 m and C = 8 m.

 g  10m / sec2 

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 8
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
CHEMISTRY Max Marks: 66
SECTION – I
(SINGLE CORRECT ANSWER TYPE)
This section contains SIX (06) questions.
• Each question has FOUR options. ONLY ONE of these four options is the correct answer.
• For each question, choose the option corresponding to the correct answer.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks :+3 If ONLY the correct option is chosen;
Zero Marks :0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks :-1 In all other cases
19. Compounds [X] and [Y] in the following reactions respectively are

A) B)

C) D)

20. The major product of the following reaction is

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 9
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

A) B)

C) D)

21. The correct order of reactivity of the following compounds towards S N 1 reaction is

A) I>II>III>IV B) I>IV>III>II C) IV>I>III>II D) IV>III>II>I

22. The major product of the following reaction is

A) B)

C) D)

23. Starting with toluene, which of the following is the best method to make the ether shown
below? (Assume that you can separate ortho and para isomers)

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 10
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

A)

B)

C)

D)

24. Which of the following compounds liberate(s) fluoride ion on warming with aqueous
NaOH?

A) II only B) I&III only C) I, II&III only D) IV only

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 11
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
SECTION – II
(ONE OR MORE CORRECT ANSWER TYPE)
• This section contains SIX (06) questions.
• Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is(are) correct answer(s).
• For each question, choose the option(s) corresponding to (all) the correct answer(s).
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks :+4 If only (all) the correct option(s) is(are) chosen;
Partial Marks :+3 If all the four options are correct but ONLY three options are chosen;
Partial Marks :+2 If three or more options are correct but ONLY two options are chosen, both of which are correct;
Partial Marks :+1 If two or more options are correct but ONLY one option is chosen and it is a correct option;
Zero Marks :0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks :-2 In all other cases
25. The product(s) including minor product(s) formed in the following reaction is(are)

A) B) C) D)
26. The product(s) including minor products of the reaction given below is(are)

A) B) C) D)
27. The reaction(s) which can be used to synthesize iodobenzene is(are)

A) B)

C) D)

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 12
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
28. Which reagent(s) accomplish(es) the following change?

A) NaCl B) SOCl2 C) HCl  ZnCl2 D) PCl5

29. The statement(s) which explain(s) the following observation is

A) EtONa is a stronger base than EtSNa

B) EtSNa is a stronger nucleophile than EtONa.
C) EtONa is a stronger nucleophile as well as stronger base than EtSNa.
D) EtONa is a stronger nucleophile than EtSNa but a weaker base.
30. Which of the following compounds give(s) benzoic acid on treatment with acidified
KMnO4 ?

A) B) C) D)
SECTION – III
(NUMERICAL VALUE TYPE)
• This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
• For each question, enter the correct numerical value of the answer using the mouse and the on-screen virtual
numeric keypad in the place designated to enter the answer. If the numerical value has more than two decimal places, truncate/round-off the value to
TWO decimal places.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks :+4 If ONLY the correct numerical value is entered;
Zero Marks :0 In all other cases
31. Consider the following reaction:

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 13
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
The mass (in g) of the chief organic product [P]is
[Atomic masses: H = 1, C =12, Na = 23, S = 32, Cl = 35.5]
32. Consider the major products of following reactions:
Fe
P
red hot

Ni(CN)2
Q


2K
R


2K
S


The sum of sp 2 carbon atoms and the number of pi electrons not involved in resonance in
P, Q, R and S is
33. Consider the following reactions:

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 14
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
The sum of the number of sp2 hybridized carbon atoms and chlorine atoms across all the
chief organic products [T], [U], [V] and [W] is
34. The number of heteroatoms in the organic product [Q] of the following reaction is
[All atoms except C and H are heteroatoms]

35. The degree of unsaturation of compound [R] of the following reaction sequence is

36. The specific rotation of (+)-1-bromo-1-phenylethane changes from 15 to  43 on

reaction with NaOH under strict S N 2 conditions. When a sample of (–)-1-bromo-1-
phenylethane was treated with aqueous NaOH, the resulting solution has a specific

rotation of 10 . The % of the reactant that underwent S N 2 reaction is

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 15
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
MATHEMATICS
SECTION – I
(SINGLE CORRECT ANSWER TYPE)
This section contains SIX (06) questions.
• Each question has FOUR options. ONLY ONE of these four options is the correct answer.
• For each question, choose the option corresponding to the correct answer.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : -1 In all other cases
2 3 2.4 5 2.4.6 7
37. Let f  x  x  x  x  x  ...... x  0,1
1.3 1.3.5 1.3.5.7
2
 1 
consider  f  x dx  g  x  C (where C is constant of integration) and g    then
 2  72

 1 
the value of g  is
 2 

2 2 2 2
A) B) C) D)
32 8 18 200

3x10  2x8  2 4 x10  x8  1 dx  f  x  C (where C is constant of integration, x >

38. If  x6
4

0) and f 1 
64 3
then the value of
 80 f  2 5 is
5 183
A) 1 B) 4 C) 7 D) 10
1  x cos x  sin x dx   x   sin x  m cos x
39. If  1 3
n
 x  p sin x  q cos x r  C
 x  sin x  cos x 2  x  sin x  cos x 2
   m
(where C is constant of integration and , n  0 ) then the value of 
 n 
 p  q r is
equal to
A) 2 B) 4 C) 6 D) 8

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 16
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

  
 1 x 1  1 x 1 
40. If x  0,1 and 
1
x tan  2 tan   dx  Ax B  C , then (A,
  1 x 1  1  x  1  

B are positive constants and C is constant of integration)
21 13
A) A  B  B) A  B  C) AB = 1 D) A – B = 1
20 6


sin  .sin  sin 6   sin 4   sin 2   2sin 4   3sin 2   6
41. The value of the integral  1  cos 2
d

is: (where C is a constant of integration)

3
1
A) 11  18sin 2   9sin 4   2sin 6   2  C
18  
3
1
B) 9  2cos6   3cos 4   6cos 2   2  C
18  
3
1
C) 9  2sin 6   3sin 4   6sin 2   2  C
18  
3
1
D) 11  18cos 2   9cos 4   2cos6   2  C
18  
5x
sin
42.  2x dx is equal to : (where c is a constant of integration)
sin
2
A) 2 x  sin x  2sin 2 x  c B) x  2sin x  2sin 2 x  c
C) x  2sin x  sin 2 x  c D) 2 x  sin x  sin 2 x  c
SECTION – II
(ONE OR MORE CORRECT ANSWER TYPE)
• This section contains SIX (06) questions.
• Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is(are) correct answer(s).
• For each question, choose the option(s) corresponding to (all) the correct answer(s).
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is(are) chosen;
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen;
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen, both of which are correct;
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a correct option;
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered);
Negative Marks : -2 In all other cases

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 17
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

 x  2 dx
43.  4 3 2
 
 f  x  C x  2  3 and f  4  0 then which is/are
x  8 x  18 x  8 x  1
CORRECT? (C is constant of integration)

A) Number of solutions of f  x   x 2 is 2
B) Number of solutions of f  x  x is 1

C) Number of solutions of f  x   1  x 2 is 2
1
D) Number of solutions of f  x  x 3 is 2
dx
44. If   2 f  x  g  x  C where C is constant of integration. Given
x  
2
x 1  x
f  1  0, g  1  1then which of the following is/are TRUE?
 1
A) lim f  x  ln   B) lim f  x  ln 2
x  2 x
C) lim g  x  0 D) lim g  x  1
x x
 cos x  sin x dx
45. The value of the integral is  1  cos x cos x  cos x sin x  1  sin x sin x (C is constant

of integration)
x x x x x x
cos  sin 1  tan 1  cot 2  cot  tan
A) 2 2  C B) 2  C C) 2 C D) 2 2 C
x x x x x
sin  cos 1  cot 1  tan 1  cot
2 2 2 2 2
x3  x  1 1 1
46. If  x4  x 2  1 dx  2 f  x  3
g  x  C ,C is constant of integration. Given


f  0  0, g 1  then which of the following is/are TRUE?
6
 
A) f 1  n 2 B) f  2  n7 C) g  2  D) g  2 
3 3
Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 18
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P
dx
If  x  y  3  x  y then
2
47.  x  y  6 is equal to (C is constant of integration)
1 1  x  y  6
A) og  x  y  3  tan 1   C
2 2 6  6 

B)
1
2 
og  x  y  3  6 
2 1
2 6
  x y
tan 1 
 6 
C

1 1  x  y  3
C) og  x  y  6  tan 1   C
2 2 6  6 
1 1  x  y  3
D) og  x  y  3  tan 1   C
2 2 6  6 
48. e
tan x
sec x  tan x  2sec x  1 sec x.dx  e tan x f  x  C , then which of the following
is/are FALSE ? (C is constant of integration)
 4
A) f  0  4 B) f    8
 3 3
   2
C) f   / 4  4  2 8 D) f    4 3 
 6  3
SECTION – III
(NUMERICAL VALUE TYPE)
• This section contains SIX (06) questions. The answer to each question is a NUMERICAL VALUE.
• For each question, enter the correct numerical value of the answer using the mouse and the on-screen virtual
numeric keypad in the place designated to enter the answer. If the numerical value has more than two decimal places, truncate/round-off the value to
TWO decimal places.
• Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If ONLY the correct numerical value is entered;
Zero Marks : 0 In all other cases

 
 x 2  1
x 2  1  tan 1  
 x 
49. For real numbers  ,  ,  and  , if  dx
 
 2
 1
x 4  3 x 2  1 tan 1 
x

 x 

 
  log e  tan 1 
x 2
 1 

    tan 
1
  x2  1
     tan1  x2  1  C
  x  x   x 
 

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 19
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

where C is an arbitrary constant, then the value of 10       is equal to ______

(  ,  ,  ,  R )

x 2 + 4x -1 1 39 f  6
50. ò 2
dx = f ( x ) + C , and f 1  then the value of is equal to
(x 2 + 3) x +3 3 4

_______ (C is constant of Integration)

 4 3 
x x  4 x  64
  dx  e f  x   C , Given f (0) = 6 then the value of 7 f  3 is _______
x
51. e 


2 
 x  4 
(C is constant of integration)
 

52. Let  
4
 x 1   
 dx  f  x  C and f  0  0 then  2f  2   is equal to _________
8
 3

 x4  2 4 
  
5x2  2 dx  A f  x  B g  x  C where A, B are positive constants and C is
53.  25 x4  4 5x  3
 1   1 1 
constant of integration. Given f    0 , g (0) = –1
 5  4  B  5, 6  A  7  .

 2  1  2  a
The value of f    g   is
 5
 a, b  N  then a 2  b is ____
 5  b

 x2  1 dx  1 
 f  x  C , f    then the value of
  89  5  
54.  2  2 2
f 
  8  

x x  2 x  1 1  x  x2
is _________ (where [.] denotes GIF) (C is constant of integration)

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 20
 Sri Chaitanya IIT Academy 27-08-2023_Sr.Super60_NUCLEUS & STERLING_BT_Jee-Adv(2020-P1)_RPTA-04_Q.P

Sec: Sr.Super60_ NUCLEUS & STERLING_BT Space for rough work Page 21