BUTTONS AND INPUT/OUT INTERFACE
Buttons / IO Interface Functions
Power USB Type-C power plug, 5V, 2A
Play/Pause Play/Pause, network pairing, and restore to the
factory setting
Preset Start to play the preset content (short press) or
save the favorite content as the preset (long
press)
Volume Up Increase volume
Volume Down Decrease volume
Analog audio in Standard RCA
Analog audio out Standard RCA
Digital Optical audio out SPDIF optical up to 192 kHz/24-bit
Digital Coax audio out Digital coaxial port up to 192 kHz/24 bit
Mic Activated solely for the purpose of automatically
calculating audio latency to ensure seamless
multiroom synchronization. This includes
compatibility with various platforms like AirPlay 2,
Alexa MRM, Chromecast MRM, and Linkplay
MRM. The MIC is engaged only during latency
measurement.
12 V trigger 2.5 mm port for cable connection to your amplifier
for automated power control.
Note: Consult your amplifier's user guide for
specifics on utilizing its 12V trigger input.
LAN 10/100Mbps Ethernet port
LIGHTS
State Color Flashing/Solid
Boot-up White Flashing (fast)
OOBE/Ready to Setup White Flashing (slow)
BT ready to pair Green Flashing (slow)
Connecting to Wi-Fi White, Green Flashing (fast)
Connected to network White Solid
BT mode, paired Green Solid
Aux-in mode Green Solid
OTA White, Green Flashing (slow)
Restore to factory setting White, Red Flashing (slow)
Not connected to the network (and Red Solid
not in setup mode)
Faulty Error Red Flashing (slow)
NOTES:
WGR: Three-color LED, no color mix
W: Wi-Fi as the audio source (product default mode)
G: Audio source from Analog, digital audio input, or BT
R: Error (Not connected to a network or faulty error)
Three modes: Solid, flashing slow, flashing fast
