0% found this document useful (0 votes)
161 views8 pages

Katalog Formulacji Autocare en

Uploaded by

KOUROSH PARDIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
161 views8 pages

Katalog Formulacji Autocare en

Uploaded by

KOUROSH PARDIS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

AUTOCARE FORMULATION

WASHING AND CARE OF VEHICLES


TABLE OF CONTENTS:

Introduction 3
Car shampoo 4
Economic car shampoo 5
Insecticide 6
Paste for chromed elements 7
Car carpet cleaner 8
Preparation for cockpit cleaning 9
Preparation for washing rims (bloody rim) 10
Preparation for rim cleaning - low pH 11
Windscreen washer fluid 12
Leather upholstery cleaner 13

1 2
Introduction: Car shampoo

Autocare chemicals are a dynamically In the car cleaning and care segment,
growing segment of the industrial and consumer apart from the wellknown and conventional
cleaning sector. The used products satisfy the products, there are also preparations PRODUCT PERCENTAGE SHARE
requirements of both the users who prefer to with properties suiting current market trends and
ABSNa 30 27.00 %
clean their cars on their own and the car growing customer requirements. They contain
cleaning and maintenance companies various advanced components fulfilling certain SULFOROKAnol L227/1 10.00 %
with hand or automatic car wash points. functions in the formulation. They make the ROKAmina K40HC 5.00 %
finished products highly efficient and effective.
Sodium carbonate 2.00 %
The autocare sector requires the use of Below we present some car cleaning and care
many specialised cleaning mixtures and sample formulations. Sodium metasilicate 3.00 %
vehicle maintenance agents. The ingredients Polikarboksylat AMC60 2.00 %
used for such mixtures are based on: They are based on high-quality raw
Water up to 100 %
• Level of product sophistication materials and chemical additives made at
the PCC EXOL SA plants, the manufacturer
• Application: hand or automatic car washes
of a wide range of industrial surfactants.
• The role of a particular ingredient APPEARANCE white, milky liquid

• Economical aspect DENSITY[20°C] 1.057 g/cm^3

• Compatibility of ingredients VISCOSITY [cP] [20°C] 34.3 cP


• Legal regulations pH 12.9

Preparation method (the process is carried out at room temperature)

Procedure:
1. Mix SULFOROKAnol L227/1 with half the required amount of water until it dissolves.
2. Next, add ROKAmina K40HC to the solution and mix it. Then add ABSNa 30 and mix
until a homogeneous solution is obtained.
3. Prepare the other solution in a separate receptacle. Mix sodium carbonate and
sodium metasilicate with the remaining amount of water. While mixing, add
Polikarboksylat AMC60 and mix until a homogeneous solution is obtained.
4. Finally, introduce solution 2 in batches into the still mixing solution 1.

3 4
Economic car shampoo Insecticide

PRODUCT PERCENTAGE SHARE PRODUCT PERCENTAGE SHARE


EXOcon B27 40.00 % SULFOROKAnol L270/1 7.00 %
ROKAmina K40HC 5.00 % EDTA (40%) 3.00 %
Sodium carbonate 2.00 % Izopropanol 3.00 %
Sodium metasilicate 3.00 % Water up to 100 %
Polikarboksylat AMC60 2.00 %
Water up to 100 %

APPEARANCE yellow, opaque liquid APPEARANCE clear colorless liquid

DENSITY [20°C] 1.055 g/cm3 DENSITY[20°C] 1.005 g/cm^3

pH 12.4 VISCOSITY [cP] [20°C] 1.52 cP

pH 12.3

Preparation method (the process is carried out at room temperature)


Preparation method (the process is carried out at room temperature)

Procedure:
Procedure:
1. Mix isopropanol with water.
1. First, mix EXOcon B27 with half the required amount of water until it dissolves.
2. Next, add EDTA and mix.
2. Then add ROKAmina K40HC to the solution and mix until a homogeneous
solution is obtained. 3. Then add SULFOROKAnol L270/1 and mix for a long time at a high speed;
do not heat up.
3. Prepare solution no. 2 in a separate receptacle. To this end, mix sodium
carbonate and sodium metasilicate with the remaining amount of water.
While mixing, add Polikarboksylat AMC60 to the remaining ingredients and
mix until a homogeneous solution is obtained.
4. Finally, introduce solution no. 2 in batches into the still mixing solution no. 1.

5 6
Paste for chromed elements Car carpet cleaner

PRODUCT PERCENTAGE SHARE PRODUCT PERCENTAGE SHARE


A dearomatized mixture 30.00 % ROKAnol L7 8.00 %
of short chain hydrocarbons
ROKAnol LP3135 3.00 %
ROKwin 80 10.00 %
Hydrotrope 3.00 %
ROKAnol NL9 5.00 %
Citric acid (50%) 0.1 %
ROKAnol IT9 10.00 %
Water up to 100 %
Water up to 100 %

APPEARANCE white paste APPEARANCE clear colorless liquid

DENSITY[20°C] 0.943 g/cm^3 DENSITY[20°C] 1.005 g/cm^3


VISCOSITY [cP] [20°C] 6.683 cP VISCOSITY [cP] [20°C] 2.31 cP
pH 6.7 pH 3.5

Preparation method (the process is carried out at room temperature) Preparation method (the process is carried out at room temperature)

Procedure:
Procedure:
1. Mix ROKAnol L7 with water until it dissolves.
1. Dissolve the non-ionic surfactants ROKAnol IT9, ROKAnol NL9 and ROKwin 80 in the
entire amount of water and mix until a homogeneous solution is obtained. 2. Then add ROKAnol LP3135 and mix until a homogeneous solution is obtained.
2. Then, while continuously mixing, add the dearomatized mixture of short chain 3. Then add a hydrotrope and mix; the solution should become clear.
hydrocarbons in portions. Increase the mixer speed and mix until the paste becomes 4. Finally, add citric acid to the solution.
homogeneous.

7 8
Preparation for cockpit cleaning Preparation for washing rims (bloody rim)

PRODUCT PERCENTAGE SHARE PRODUCT PERCENTAGE SHARE


ROKAnol GA7 3.00 % Sodium mercaptoacetate (46%) 30.00 %
Dipropylene glycol 3.00 % ROKAmid KAD/2A 2.00 %
ROKAmin K15K 2.00 % ROKAnol NL9 4.00 %
Citric acid 1.00 % ROKAnol IT9 5.00 %
Water up to 100 % SULFOROKAnol L270/1 5.00 %
Water up to 100 %

APPEARANCE clear colorless liquid APPEARANCE clear colorless liquid

DENSITY[20°C] 1.007 g/cm^3 DENSITY[20°C] 1.088 g/cm^3

VISCOSITY [cP] [20°C] 1.59 cP VISCOSITY [cP] [20°C] 73.8 cP


pH 7.3
pH 2.6
Preparation method (the process is carried out at room temperature)
Preparation method (the process is carried out at room temperature)

Procedure: Procedure:
1. First, mix dipropylene glycol with water. 1. Mix SULFOROKAnol L270/1 with water until it dissolves (the process takes long, so you can
accelerate it by heating up the solution).
2. Then add ROKAnol GA7 and ROKAmin K15K (in this sequence), while
continuously mixing until a homogeneous solution is obtained. 2. Then add sodium mercaptoacetate to the solution and mix it.
3. Finally, add citric acid to determine the pH. 3. Next, add non-ionic surfactants ROKAnol IT9 ROKAnol NL9, and mix until a homogeneous
solution is obtained.
4. Finally, add ROKAmid KAD/2A and mix until you obtain a homogeneous solution with
increased viscosity.

9 10
Preparation for rim cleaning - low pH Windscreen washer fluid

PRODUCT PERCENTAGE SHARE PRODUCT PERCENTAGE SHARE


EXOclean AC 50.00% Ethyl alcohol 30.00 %
Water up to 100 % Propylene glycol 0.5 %
ROKAnol GA7 1.00 %
Ammonia up to pH=7
Preservative 0.1 %
Water up to 100 %

APPEARANCE clear colorless liquid APPEARANCE clear colorless liquid


DENSITY[20°C] 1.061 g/cm^3 DENSITY[20°C] 0.952 g/cm^3
VISCOSITY [cP] [20°C] 19.0 cP VISCOSITY [cP] [20°C] 2.6 cP
pH 1.4 pH 6.1

Preparation method (the process is carried out at room temperature) Preparation method (the process is carried out at room temperature)

Procedure:
Procedure:
1. Mix ethyl alcohol with propylene glycol, then add 30% of the required amount of water
1. Add EXOclean AC to water (not vice versa).
and mix.
2. Mix the combined ingredients for 30 min. until homogenization.
2. Then add ROKAnol GA7 to the solution and mix it.
3. Add the remaining amount of water and, mix continuously, add ammonia until pH = 7.
4. Final add the preservative to the solution and mix.

11 12
Leather upholstery cleaner

PRODUCT PERCENTAGE SHARE


Silicone oil 17.00 %
EXOemul OM4 14.00 %
ROKAnol GA7W 5.00 %
Methoxydipropanol 2.00 %
Propylene glycol 2.00 %
Water up to 100 %

APPEARANCE white, milky liquid


DENSITY[20°C] 0.994 g/cm^3
VISCOSITY [cP] [20°C] 12669 cP
pH 7.1

Preparation method (the process is carried out at room temperature)

Procedure:
1. Add a motor oil and EXOemul OM4 to a prepared receptacle. Heat the solution up to 40°C.
2. In a separate receptacle, prepare an aqueous solution of ROKAnol GA7W. Add the
prepared solution in small portions to the mixture in point 1 and homogenize.
3. Then cool down the emulsion while still homogenizing.
4. Add propylene glycol and methoxydipropanol to the homogeneous emulsion.
Homogenize for 1 hour at room temperature.

www.products.pcc.eu

13

You might also like