1.

Ceramic tools can be used in [ ]

(a)plastic processing (b) metal processing (c) metal casting (d) all the above
2. Which of the following is a indirect rapid tooling method. [ ]
(a)RTV epoxy tools (b) spray metal deposition (c) 3D keltool (d) LOM

3. MIMICS is most preferred in [ ]

(a) Medical and bioengineering (b) coin (c) jewellery (d) all the above

4. Newly proposed formats are [ ]

(a)SLC file (b) CLI file (c) LEAF file (d) all the above
5. Coloured prototypes can be built using... [ ]
(a)LOM (b)FDM (c) 3D printing (d) all the above
6. Wax pattern are used in [ ]
(a)Investment casting (b) sand casting (c) 3D printing (d) all the above
7. 3D keltool process is based on [ ]
(a)LOM (b) SLA (c) SLS (d) FDM
8. Rhino software is also known as [ ]
(a)Rhinoceros (b) MIMICS (c) MAGICS (d) solid view
9. Burn masks are related to [ ]
(a) Customized implants (b)complex surgery (c) medical device (d) anthropology
10. Applications of RP technology in the area of tooling and manufacturing is [ ]
(a) Tooling parts of mould (b) master patterns (c) EDM electrodes (d) all of the above
11. Full form of FDM is_______ [ ]
(a)Fixed Development Modelling (b)Fusion Development Modelling
(c)Fused Deposition Modelling (d) Focused Deposition Modelling
12. Which of the following is not Powder-Based RP system? [ ]
(a)Selective Laser Sintering (SLS) (b)Solid Object Ultraviolet-Laser Printer (SOUP)
(c)Electron Beam Melting (EBM) (d)Direct Metal Deposition (DMD)
13. Which of the following is used as base material in Selective laser sintering (SLS)? [ ]
(a)Photopolymer (b) Thermoplastics, Metal powders (c) Titanium alloys (d) Various materials
14. Which one of the processes is NOT using a laser? [ ]
(a)LOM (b)SLA (c)SLS (d)FDM
15. Which of the process is using the extrusion concept? [ ]
(a)SLA (b)SLS (c)FDM (d)MJM
16. In Fused Deposition Modelling, the raw material is used in the form of _____. [ ]
(a)wax (b)wire (c)powder (d)all the above mentioned
17. Device for drug delivery is RP application in [ ]
(a)Design and production (b) engineering, planning and analysis (c) tooling& manufacturing (d)all the above
18. Hip implant is RP application in [ ]
(a)customized implants and prosthesis (b) coin (c) jewellery (d) all the above
19.Form and fit is verified during [ ]
(a)Design (b)engineering, planning and analysis (c) tooling& manufacturing (d)all the above
20.Industries in which rapid prototyping is used are [ ]
(a)Jewellery (b)coin (c) Aerospace (d)all the above
Here are the answers to the questions:

1. Ceramic tools can be used in

Answer: (b) metal processing
2. Which of the following is an indirect rapid tooling method?
Answer: (a) RTV epoxy tools
3. MIMICS is most preferred in
Answer: (a) Medical and bioengineering
4. Newly proposed formats are
Answer: (d) all the above
5. Coloured prototypes can be built using
Answer: (d) all the above
6. Wax pattern are used in
Answer: (a) Investment casting
7. 3D keltool process is based on
Answer: (c) SLS
8. Rhino software is also known as
Answer: (a) Rhinoceros
9. Burn masks are related to
Answer: (b) complex surgery
10. Applications of RP technology in the area of tooling and manufacturing are
Answer: (d) all of the above
11. Full form of FDM is
Answer: (c) Fused Deposition Modelling
12. Which of the following is not a Powder-Based RP system?
Answer: (b) Solid Object Ultraviolet-Laser Printer (SOUP)
13. Which of the following is used as a base material in Selective Laser Sintering (SLS)?
Answer: (b) Thermoplastics, Metal powders
14. Which one of the processes is NOT using a laser?
Answer: (a) LOM
15. Which of the processes is using the extrusion concept?
Answer: (c) FDM
16. In Fused Deposition Modelling, the raw material is used in the form of
Answer: (b) wire
17. Device for drug delivery is an RP application in
Answer: (d) all the above
18. Hip implant is an RP application in
Answer: (a) customized implants and prosthesis
19. Form and fit is verified during
Answer: (a) Design
20. Industries in which rapid prototyping is used are
Answer: (d) all the above
 1. Full form of FDM is_______ [ ]
(a)Fixed Development Modelling (b)Fusion Development Modelling
(c)Fused Deposition Modelling (d) Focused Deposition Modelling
2. Which of the following is not Powder-Based RP system? [ ]
(a)Selective Laser Sintering (SLS) (b)Solid Object Ultraviolet-Laser Printer (SOUP)
(c)Electron Beam Melting (EBM) (d)Direct Metal Deposition (DMD)
3. Which of the following is used as base material in Selective laser sintering (SLS)? [ ]
(a)Photopolymer (b) Thermoplastics, Metal powders (c) Titanium alloys (d) Various materials
4. Which one of the processes is NOT using a laser? [ ]
(a)LOM (b)SLA (c)SLS (d)FDM
5. Which of the process is using the extrusion concept? [ ]
(a)SLA (b)SLS (c)FDM (d)MJM
6. In Fused Deposition Modelling, the raw material is used in the form of _____. [ ]
(a)wax (b)wire (c)powder (d)all the above mentioned
7. Device for drug delivery is RP application in [ ]
(a)Design and production (b) engineering, planning and analysis (c) tooling& manufacturing (d)all the above
8. Hip implant is RP application in [ ]
(a)customized implants and prosthesis (b) coin (c) jewellery (d) all the above
9.Form and fit is verified during [ ]
(a)Design (b)engineering, planning and analysis (c) tooling& manufacturing (d)all the above
10.Industries in which rapid prototyping is used are [ ]
(a)Jewellery (b)coin (c) Aerospace (d)all the above

11. Ceramic tools can be used in [ ]

(a)plastic processing (b) metal processing (c) metal casting (d) all the above
12. Which of the following is a indirect rapid tooling method. [ ]
(a)RTV epoxy tools (b) spray metal deposition (c) 3D keltool (d) LOM

13. MIMICS is most preferred in. [ ]

(a) Medical and bioengineering (b) coin (c) jewellery (d) all the above

14. Newly proposed formats are [ ]

(a)SLC file (b) CLI file (c) LEAF file (d) all the above
15. Coloured prototypes can be built using... [ ]
(a)LOM (b)FDM (c) 3D printing (d) all the above
16. Wax pattern are used in [ ]
(a)Investment casting (b) sand casting (c) 3D printing (d) all the above
17. 3D keltool process is based on [ ]
(a)LOM (b) SLA (c) SLS (d) FDM
18. Rhino software is also known as [ ]
(a)Rhinoceros (b) MIMICS (c) MAGICS (d) solid view
19. Burn masks are related to [ ]
 (a) Customized implants (b)complex surgery (c) medical device (d) anthropology
20. Applications of RP technology in the area of tooling and manufacturing is [ ]
(a)tooling parts of mould (b)master patterns (c) EDM electrodes (d) all of the above

Here are the answers:

1. Full form of FDM is

Answer: (c) Fused Deposition Modelling
2. Which of the following is not a Powder-Based RP system?
Answer: (b) Solid Object Ultraviolet-Laser Printer (SOUP)
3. Which of the following is used as base material in Selective laser sintering (SLS)?
Answer: (b) Thermoplastics, Metal powders
4. Which one of the processes is NOT using a laser?
Answer: (a) LOM
5. Which of the processes is using the extrusion concept?
Answer: (c) FDM
6. In Fused Deposition Modelling, the raw material is used in the form of
Answer: (b) wire
7. Device for drug delivery is an RP application in
Answer: (d) all the above
8. Hip implant is an RP application in
Answer: (a) customized implants and prosthesis
9. Form and fit is verified during
Answer: (a) Design
10. Industries in which rapid prototyping is used are
Answer: (d) all the above
11. Ceramic tools can be used in
Answer: (b) metal processing
12. Which of the following is an indirect rapid tooling method?
Answer: (a) RTV epoxy tools
13. MIMICS is most preferred in
Answer: (a) Medical and bioengineering
14. Newly proposed formats are
Answer: (d) all the above
15. Coloured prototypes can be built using
Answer: (d) all the above
16. Wax patterns are used in
Answer: (a) Investment casting
17. 3D keltool process is based on
Answer: (c) SLS
18. Rhino software is also known as
Answer: (a) Rhinoceros
19. Burn masks are related to
Answer: (b) complex surgery
20. Applications of RP technology in the area of tooling and manufacturing are
Answer: (d) all of the above
1. Coloured prototypes can be built using... [ ]
(a)LOM (b) FDM (c) 3D printing (d) all the above
2. Wax pattern are used in [ ]
(a)Investment casting (b) sand casting (c) 3D printing (d) all the above
3. 3D keltool process is based on [ ]
(a)LOM (b) SLA (c) SLS (d) FDM
4. Rhino software is also known as [ ]
(a)Rhinoceros (b) MIMICS (c) MAGICS (d) solid view
5. Burn masks are related to [ ]
(a) Customized implants (b)complex surgery (c) medical device (d) anthropology
6. Applications of RP technology in the area of tooling and manufacturing is [ ]
(a)tooling parts of mould (b)master patterns (c) EDM electrodes (d) all of the above
7. Ceramic tools can be used in [ ]
(a)plastic processing (b) metal processing (c) metal casting (d) all the above
8. Which of the following is a indirect rapid tooling method. [ ]
(a)RTV epoxy tools (b) spray metal deposition (c) 3D keltool (d) LOM

9. MIMICS is most preferred in [ ]

(a) Medical and bioengineering (b) coin (c) jewellery (d) all the above

10. Newly proposed formats are [ ]

(a)SLC file (b) CLI file (c) LEAF file (d) all the above
 11. Full form of FDM is_______ [ ]
(a)Fixed Development Modelling (b)Fusion Development Modelling
(c)Fused Deposition Modelling (d) Focused Deposition Modelling
12. Which of the following is not Powder-Based RP system? [ ]
(a)Selective Laser Sintering (SLS) (b)Solid Object Ultraviolet-Laser Printer (SOUP)
(c)Electron Beam Melting (EBM) (d)Direct Metal Deposition (DMD)
13. Which of the following is used as base material in Selective laser sintering (SLS)? [ ]
(a)Photopolymer (b) Thermoplastics, Metal powders (c) Titanium alloys (d) Various materials
14. Which one of the processes is NOT using a laser? [ ]
(a)LOM (b)SLA (c)SLS (d)FDM
15. Which of the process is using the extrusion concept? [ ]
(a)SLA (b)SLS (c)FDM (d)MJM
16. In Fused Deposition Modelling, the raw material is used in the form of _____. [ ]
(a)wax (b)wire (c)powder (d)all the above mentioned
17. Device for drug delivery is RP application in [ ]
(a)Design and production (b) engineering, planning and analysis (c) tooling& manufacturing (d)all the above
18. Hip implant is RP application in [ ]
(a)customized implants and prosthesis (b) coin (c) jewellery (d) all the above
19.Form and fit is verified during [ ]
(a)Design (b)engineering, planning and analysis (c) tooling& manufacturing (d)all the above
20.Industries in which rapid prototyping is used are [ ]
(a)Jewellery (b)coin (c) Aerospace (d)all the above

Here are the answers:

1. Coloured prototypes can be built using...

Answer: (d) all the above
2. Wax pattern is used in
Answer: (a) Investment casting
3. 3D keltool process is based on
Answer: (c) SLS
4. Rhino software is also known as
Answer: (a) Rhinoceros
5. Burn masks are related to
Answer: (b) complex surgery
6. Applications of RP technology in the area of tooling and manufacturing are
Answer: (d) all of the above
7. Ceramic tools can be used in
Answer: (b) metal processing
8. Which of the following is an indirect rapid tooling method?
 Answer: (a) RTV epoxy tools
9. MIMICS is most preferred in
Answer: (a) Medical and bioengineering
10. Newly proposed formats are
Answer: (d) all the above
11. Full form of FDM is
Answer: (c) Fused Deposition Modelling
12. Which of the following is not a Powder-Based RP system?
Answer: (b) Solid Object Ultraviolet-Laser Printer (SOUP)
13. Which of the following is used as base material in Selective laser sintering (SLS)?
Answer: (b) Thermoplastics, Metal powders
14. Which one of the processes is NOT using a laser?
Answer: (a) LOM
15. Which of the processes is using the extrusion concept?
Answer: (c) FDM
16. In Fused Deposition Modelling, the raw material is used in the form of
Answer: (b) wire
17. Device for drug delivery is an RP application in
Answer: (d) all the above
18. Hip implant is an RP application in
Answer: (a) customized implants and prosthesis
19. Form and fit is verified during
Answer: (a) Design
20. Industries in which rapid prototyping is used are
Answer: (d) all the above