Hydraulic tools
Hydraulic pumps
50 MPa (7 250 psi) 100 MPa (14 500 psi)
Hydraulic pump TMJL 50 Hydraulic pump 729124
The SKF TMJL 50 is mainly intended for larger SKF Hydraulic Nuts and The SKF 729124 is mainly intended for SKF Hydraulic Nuts (≤ HMV 54E)
SKF OK Coupling hydraulic chambers, but is also suitable for applications to mount bearings or components where a maximum pressure of 100 MPa
where a maximum pressure of 50 MPa (7 250 psi) is required. (14 500 psi) is required.
• Large oil container capacity 2 700 cm3 (165 in.3) • Oil container capacity 250 cm3 (15 in..3)
• Over pressure valve and connection port for a pressure gauge • Fitted with a pressure gauge
• Packed in a sturdy protective case • Packed in a sturdy protective case
Applications Applications
• SKF OK Coupling hydraulic chambers • SKF Hydraulic Nuts ≤ HMV 54E
• All sizes SKF Hydraulic Nuts • Oil injection applications where the maximum pressure
• Oil injection applications where the maximum pressure is 100 MPa (14 500 psi)
is 50 MPa (7 250 psi)
Technical data
Designation TMJL 50 729124 TMJL 100 728619 E
Maximum pressure 50 MPa (7 250 psi) 100 MPa (14 500 psi) 100 MPa (14 500 psi) 150 MPa (21 750 psi)
Oil container capacity 2 700 cm3 (165 in.3) 250 cm3 (15 in.3) 800 cm3 (48 in.3) 2 550 cm3 (155 in.3)
Volume/stroke 3,5 cm3 (0.21 in.3) 0,5 cm3 (0.03 in.3) 1,0 cm3 (0.06 in.3) 1st stage: 20 cm3 below 2,5 MPa
(1.2 in.3 below 362 psi)
2nd stage: 1 cm3 above 2,5 MPa
(0.06 in.3 above 362 psi)
Length of pressure hose fitted with 3 000 mm (118 in.) 1 500 mm (59 in.) 3 000 mm (118 in.) 3 000 mm (118 in.)
quick connection coupling
Connection nipple (included) G 1/4 quick connection G 1/4 quick connection G 1/4 quick connection G 1/4 quick connection
Weight 12 kg (26 lb) 3,5 kg (8 lb) 13 kg (29 lb) 11,4 kg (25 lb)
All SKF Hydraulic Pumps are filled with SKF Mounting Fluid and are supplied with an extra litre of fluid.
Large oil container 100 MPa (14 500 psi) 150 MPa (21 750 psi)
Hydraulic pump TMJL 100 Hydraulic pump 728619 E
The SKF TMJL 100 pump is mainly intended for use with hydraulic nuts The SKF 728619 E is a two-stage pump suitable for use with SKF
(≤ HMV 92E) to mount bearings or components where a maximum Supergrip Bolts and to mount bearings or components where a maximum
pressure of 100 MPa (14 500 psi) is required. pressure of 150 MPa (21 750 psi) is required.
• Oil container capacity 800 cm3 (48 in.3) • Oil container capacity 2 550 cm3 (155 in.3)
• Fitted with a pressure gauge • Two stage pressure pumping
• Packed in a sturdy protective case • Fitted with a pressure gauge
• Packed in a sturdy protective case
Applications
• SKF Hydraulic Nuts ≤ HMV 92E Applications
• Oil injection applications where the maximum pressure • SKF Supergrip Bolts
is 100 MPa (14 500 psi) • Oil injection applications where the maximum pressure
• Suitable with SKF Hydraulic Assisted Pullers TMHP series is 150 MPa (21 750 psi)
• All sizes SKF Hydraulic Nuts
Mounting fluid LHMF 300 and
Dismounting fluid LHDF 900
SKF mounting and dismounting fluids are suitable for use with
SKF hydraulic equipment, including hydraulic pumps, HMV ..E nuts and
oil injection tools in mounting and dismounting jobs. All SKF Hydraulic
LHMF 300 LHDF 900 Pumps are filled with SKF Mounting Fluid LHMF 300 and are supplied
with an extra litre of fluid.
For more information, see page 76
