AMETHYSTFIELD SCHOOL
FIRST TERMINAL EXAMINATION 2023/2024
SUBJECT: TECHNICAL DRAWING CLASS: SS2 DURATION: 2HRS
INSTRUCTION: EIGHT (8) QUESTIONS TO ANSWER FOUR (4)
Note: Use all the necessary drawing instruments and materials, all dimensions are in mm, marks will be awarded
for good draughtsmanship and show all the construction lines.
1. Draw the development of the frustum of the cylinder below.
70mm
X y 45°
15mm
60mm
2. Draw an ellipse with a major axis 120 mm and minor axis 80 mm by the auxiliary circles method.
3. Draw a cycloid for a rolling circle 60 mm, making the initial position of the tracing point at the top of
the vertical Centre line of the circle.
4. Using 60 mm as diameter, draw an involute of a circle.
5. Given the span as 130mm and divide half-span into six (6) equal part, for the height use 60 mm,
radiate line from the Centre. Draw vertical lines from the points to intersect their corresponding radial
lines to mark the curve points of the required parabola.
6. Using 25 mm as the base line draw the development of a pyramid.
7. Draw the true shape of a truncated hexagonal prism
X1
70mm y1
X y 45°
60°
22
60°
25mm
8. Draw the development of the frustum of the hexagonal prism
