Memory Module Specifications
KF436C16RB1/16
16GB 2G x 64-Bit
DDR4-3600 CL16 288-Pin DIMM
SPECIFICATIONS
CL(IDD) 17 cycles
Row Cycle Time (tRCmin) 45.75ns(min.)
Refresh to Active/Refresh 350ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 32ns(min.)
UL Rating 94 V - 0
Operating Temperature 0o C to +85o C
Storage Temperature -55o C to +100o C
DESCRIPTION FEATURES
Kingston FURY KF436C16RB1/16 is a 2G x 64-bit (16GB) • Power Supply: VDD = 1.2V Typical
DDR4-3600 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory • VDDQ = 1.2V Typical
module, based on sixteen 1G x 8-bit FBGA components per module.
• VPP = 2.5V Typical
Each module kit supports Intel® Extreme Memory Profiles
• VDDSPD = 2.2V to 3.6V
(Intel® XMP) 2.0. Each module has been tested to run at
DDR4-3600 at a low latency timing of 16-20-20 at 1.35V. The • On-Die termination (ODT)
SPDs are programmed to JEDEC standard latency • 16 internal banks; 4 groups of 4 banks each
DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM
• Bi-Directional Differential Data Strobe
uses gold contact fingers. The JEDEC standard electrical
and mechanical specifications are as follows: • 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.66” (42.2mm), w/heatsink
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
• XMP Profile #1: DDR4-3600 CL16-20-20 @1.35V
• XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V
Continued >>
kingston.com Document No. 4810048B 08/12/22 Page 1
continued
MODULE WITH HEAT SPREADER
133.35 mm 8.3 mm
42.2 mm
MODULE DIMENSIONS
All measurements are in millimeters.
(Tolerances on all dimensions are ±0.12 unless otherwise specified)
133.35
129.55
2.10·
·0.15
31.25
3.00
11.00
14.60
Detail A Detail B Detail D Detail E Detail C
17.60
2.70·0.15
8.00
Pin 1 Pin 35 Pin 47 Pin 105 Pin 117
3.35
64.60 56.10
28.90 22.95
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Kingston reserves the right to change any information at anytime without notice.
FOR MORE INFORMATION, GO TO KINGSTON.COM
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at
the published Kingston FURY memory speeds and timing settings. Kingston does not recommend that any user attempt to run their
computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.
©2022 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. Document No. 4810048B Page 2
Kingston FURY and the Kingston FURY logo are trademarks of Kingston Technology Corporation.
All trademarks are the property of their respective owners. kingston.com
