Teaching Labs

The FoE (Faculty of Engineering) has the following teaching laboratories:

Sr # Laboratory Name Location Apparatus & Software Safety Regulations

& Area Equipment

1 Electronics Lab 6th Level Listed below All relevant software Affixed inside Labs in
is available form of posters

2 Embedded Computing 6th Level Listed below All relevant software Affixed inside Labs in
Lab is available form of posters

3 Digital and Control 4th Level Listed below All relevant software Affixed inside Labs in
Systems Lab is available form of posters

4 Microware 4th Level Listed below All relevant software Affixed inside Labs in
Engineering & is available form of posters
Communication
Systems Lab

5 Digital Signal 4th Level Listed below All relevant software Affixed inside Labs in
Processing Lab is available form of posters

6 Machines Lab 4th Level Listed below All relevant software Affixed inside Labs in
is available form of posters

7 Computer Lab 6th Level Listed below All relevant software Affixed inside Labs in
is available form of posters

8 Circuits Lab 4th Level Listed below All relevant software Affixed inside Labs in
is available form of posters

9 Programming Lab 4th Level Listed below All relevant software Affixed inside Labs in
is available form of posters

10 High Performance 4th Level Listed below All relevant software Affixed inside Labs in
Computing Lab is available form of posters
Lab Staff is available in all Labs, working in shifts to keeps the labs working
efficiently, and ensures the provision of core technology services to the faculty, the
students, and the staff.
The details of equipment within each teaching lab are summarized below.
Digital and Control Systems Lab

Digital Systems and Controls Lab has 24 Work-bench with Core i7 Systems, relevant
software and internet facility. The List of Equipment is given below.

Sr Equipment Qty
#

1 NI Elvis II + Hardware 25

2 Cables PITS. 50-OHM, BNC, Male both end, 12-in, Qty 2 50

3 Cables PITS, Banana Plugs, Male-Both Ends, 12-in, Black & Red 25+25

4 NI MYRIO-1900 50

5 NI MYRIO Mechatronics Kits 50

6 NI MYRIO Starter Kit 50

7 NI MYRIO Embedded Kit 50

8 Shield Adapter UNO R3 for NI MYRIO 50

9 Digilent NXT Sensor Adapter For MYRIO 50

10 High Current Adapter for NI MYRIO 50

11 Wire Wrap OR Protoboard Expansion For MYRIO 50

12 MyParts Texas Instruments kit 25

13 Double Inverted Pendulum Module 2

14 Quanser terminal Board for MYRIO 4

15 NI PCI-E-6351, X-Series Multifunction DAQ 2

16 NI-M&X-Series Terminal Board For RCP 2

17 1 Channel linear voltage amplifer, 4A, 24V Contin, current sense, over heat current 4
 indication

18 Rotary Flexible Joint Module 2

19 Rotary Flexible Link Module, Strain Gage Flex Sensor, Abet-Aligned Lab Teaching 2
Material and Vis

20 EPM Shielded Cable 68-Pin 2

21 Rapid control prototype toolkit for LV CDSM, Code: Quanserrcp_download 4

22 NI MY RIO MXP Assessory-1900 50

23 Rotary Servo Experiment, DC Motor and Gearbox, Encoder, Tach, ABET-ALIGNED 4

Lab Teaching Materials And VIS

24 NI MY DIGITAL QTY5 MAIN (ASSEMBLY) 10

25 SELF ERECTING ROTARY INVERTED PENDULUM MODULE FOR SRV02-ET 2

HIGH RESOLUTION ENCODER

26 Quanser Qunet Myoelectric Board for NI Elvis (Acad Only) 2

27 NI SP200B 10:1 and 1:1 Switchable Passive Oscilloscope probe, 60 V 25

28 P2 probe set, Include verity of probve termination options for use with DMM device 25

29 Power Cords ,240V,10A 25

30 FATEK PLC 7

31 Nexys 4 Artix-7 FPGA Board 12

32 Snap Circuits 30

33 QUANSER QNET 2.0 HVAC BOARD FOR NI ELVIS (ACAD ONLY) 12

34 QUANSER QUNET 2.0 DC MOTOR BOARD FOR NI ELVIS (ACAD ONLY) 12

35 QUANSER QUNET 2.0 VTOL BOARD FOR NI ELVIS (ACAD ONLY) 12

36 Quanser Qunet 2.0 Mechantronic Actuator Board 12

37 QUANSER QUNET 2.0 ROTARY INVERTED PENDULAM BOARD FOR NI ELVIS 12

 (ACAD ONLY)

38 IEEE 802.15.4 WSN platform, TI MSP430F1611 Microcontroller, CC2420 RF with 15

additional power amplifier & LAN, TinyOS2.X & ContikiOS Compatible, 2xAA
Battery Holder, External 5dBi SMA antenna included, Hirose 51-pin connector, DC
Input, Included DC Power Supply

39 Compatible with WSN Motes (Item 1, Lot 5): ADC 4 ports, GPIO(User INT) 2 ports, 45
RS232, 2 ports SP3232 SIPEX, VoltAmp, 2Ports LMV932 National Semiconductor

40 Xilinx SoC ZC702 based development board with device locked Vivado Licence 2

41 Snap Circuits 10

42 Tetrix Robotic Kits 20

43 work bench 25

44 PC Core i7 24

45 Mouse 24

46 Key boards 24

47 Wifi module 24
MICROWAVE AND COMMUNICATION SYSTEMS LAB
Antenna and Microwave Lab has 12 workstations with core i7 systems, relevant software
and internet facility. The list of equipment is given below.

Sr. # Description Quantity

1 12 Workstations (Vector Network Analyzer,up 12

to 6 GHz)
2 Antennas (Mono pole, Dipole, yagi yuda, 12
helical, horn, Cophasal, Parabolic Antenna)
3 Hack RF 4

4 Mini Circuits (Amplifiers, couplers, voltage 6

control oscillator, Choke, BIAS tee)
5 Manual VNA calibration kit K-Type 3

Machines Lab

Sr. # Power Electronics related Equipment Qty.

1 Academic Kit, NI SBRIO-9607 GPIC 15
2 NI Power Quality Analyzer-Full Package 2
3 LCR Meter 5
4 Pyranometer 1
5 Flux Meter 12
Sr. # EMS Workstations Qty.
1 Inductive Load 12
2 Capacitive Load 12
3 Synchronizing Module 12
4 Resistive Load 12
5 Fully Protected Transformer 12
6 Three-Phase Transformer Bank 12
7 Data Acquisition and Control Interface 12
8 Connection Leads 12
9 DC Motor / Generator 12
10 Synchronous Motor / Generator 12
11 Four-Pole Squirrel-Cage Induction Motor 12
12 Power Supply 12
13 Capacitor-Start Motor 12
14 Universal Motor 12
15 Four-Quadrant Dynamometer/Power Supply 12
Sr. # EMS Workbench Qty.
1 Work Bench 12
2 PC's (Core i5, Windows 10, 64 bit, Smart card, 4 + 6 + 3 = 13
Core i3, Core i7)
3 Chairs 24 + 31 = 55
Sr. # Dissectible Machine Training System Qty.
1 Work Bench for the Dissectible Machine 2
2 Assembly Housing Module 2
3 Dissectible Machine Parts 2
Sr. # Renewable Energy Training System Qty.
1 Solar Wind Energy Training System 1
2 Basic Renewable Energy Training System 1
3 Three-Module Workstations 1
Sr. # EMS User Manual Qty.
1 AC/DC Motor Instruction Manual 12
2 AC/DC Motor Student Manual 12
3 Power Circuit And Transformer Instructor Manual 12
4 Power Circuit And Transformer Student Manual 12
5 Magnetic Circuit and Transformer Student Manual 12
6 Dissectible Machine User Guide 1
7 Electric Power Technology User Guide 21

Electronics lab

WORKSTATIONS: 50

DESKTOP PCS: 50

Sr. # Description Qty Held

1 Switching Dc power Supply (0-60 V) 50

2 Digital Storage Oscilloscope 50
3 Function Generator 50
4 Dual Measurement Multimeter 50
5 DC Power Supply Probe 100 pairs
6 Oscilloscope Probe 100
7 Function Generator Probe 110
8 DMM Probe 50 pairs
9 Analogue Multimeter 16
10 Handheld Multimeter 10
11 PCB Drill Machine 5
12 Silicon Gun 2
13 Wire Stripper 5
14 Nose Plier 10
15 Screw Driver Set 10
16 Plier 10
17 Wire Cutter 2
18 Screw Driver Kit 2
19 Sucker 8
20 Solder Iron 20
21 Bread Board 30
22 Bread Board Pro'sKit 19
23 L-298 Motor Driver 10
24 Arduino UNO 20
25 Arduino Mega 2560 5
26 i2c 20
27 Robot car chassis 20
28 Ultra Sonic Sensor 20
29 IR Tx Rx 20
30 Servo Motor 20
31 Transformer 45
32 Magnifying Glass 1
33 Auto Transformer 1
34 Resistors (values in Ohms Ω) 400 each
35 Resistors (values in kilo Ohms KΩ) 400 each
36 Resistors (Values in Ohms MΩ) 50 each
37 Potentiometer KΩ 50 each
38 Capacitors (Values in pF) 50 each
39 Capacitors (Vaues in nF) 50 each
40 Capacitors (Values in uF) 50 each
41 Inductors (Values in uH) 50 each
42 Inductors (Values in mH) 50 each
43 Zener in Volts 50 each
44 1N4001 200
45 1N4007 200
46 2N3904 NPN 50
47 2N3906 PNP 50
48 2N2222 NPN 50
49 LM741 150
50 LM324 100
51 LM317 100
52 LM337 50
53 LM386 25
54 LM7812 30
55 LM7805 50
56 BT151 280
57 BT152 35
58 BD139 70
59 BD140 85
60 TL494 20
61 KIA494 50
62 4N25 50
63 LM555 30
64 K117 50
65 K705 50
66 NE556N 100
67 IRF634 50
68 IRF1404 80
69 IRF540N 80
70 J103 50
71 Push Button 50
72 LED (red, yellow, blue, green, white) 40 each
73 LDR 30
74 BS170 100
75 BS547 100
76 BS558 100
77 Relay 6V 50
78 Relay 12V 50
79 Battery 9 Volt 22
80 1.5V AAA cell 32
81 Fuse 150(approx)
82 Jumper wire 4kg(approx)
83 Soldering Elements 60 WATT 10
84 Soldering Bits 60 WATT 10
85 Soldering Wire 70/30
86 Soldering Sponge 20
87 Wiring Pipe 23
88 Male /Female Socket 24
89 LED Bulb 50
90 Dimmer 24
91 Piano Socket 24
 92 Piano Switch One way 60
93 Piano Switch Two way 36
94 Piano Light 24
95 Bulb Holder 52
96 Electric Board 16
97 3/4 Tee 100
98 3/4 Elbows 100
99 3/4 Sockets 24
100 3/4 Tee Box 48
101 3/4 Clamps 200
102 Circuit Breaker Single 12
103 Electrical Wire 3/29 6 Packet
104 Insulation Tape 20
105 Rubber Gloves 14 pairs
106 Wooden Sheets 31*27 13
107 Saw Teeth Cutter 2
108 Cutter Handle 2
109 Inches Tape 3
110 L-Key Set 2
111 Haksaw Frame 2
112 Blades 12
113 Screw Driver (+) & (-) 2
114 Winding Machine 2

DIGITAL SIGNAL PROCESSING lab

NUMBER OF WORKSTATIONS: 25

NUMBER OF DESKTOP PCS: 25

Sr. Equipment Qty

1
# Cables PITS, Banana Plugs, Male-Both Ends, 12-in , Black & Red 15
2 Cables PITS. 50-OHM, BNC, Male both end, 12-in, Qty 2 15
3 NI Elvis II + Hardware (For academics use only) (main assembly) 15
4 NI USRP-2943R, 40MHz BW, 1.2GHz To 6GHz SDR (Main Assembly) 4
5 Power cord 240 V/10A 15
6 P2 probe set (2 wires + 8 terminals of different types) 15
7 NI SP200B 10:1 and 1:1 Switchable Passive Oscilloscope probe, 60 V 15
(probe + 6 sub parts)
8 Dual Band 2.4-2.48GHz And 4.9-5.9GHz Vertical Antenna, 3dBi Gain 32
9 VERT 400:144 MHZ, 1200MHZ, TRI BAND VERTIAL ANTENNA 28
10 VERT 900: 824-960 MHZ DUAL-BAND VERTICAL ANTENNA 28
11 GPIO Connection Kit for USRP RIO (GPIO breakout board + DB-15, 1 6
meter cable)
12 PCIe-MXI Express Interface Kit For USRP RIO (REV 3 + CCA + Cable 6
+ Documentation)
13 International Power Cords For USRP RIO (Main Assembly) (6 cables) 8

14 PXIe-MXI Express Interface Kit For USRP RIO 7

(CCA+cables+CD+Setup docs)
15 6V DC 3A POWER SUPPLY, 100-240VAC IN, 50-60HZ, PSE 24
CERTIFIED (4 shoe)
16 NI USRP-2940R, 40MHz BW, 50 MHz to 2.2GHz SDR (Main Assembly) 4

17 NI myDAQ-University Kit-Hardware Only (CD, 2 probes, usb cables, 25

screw driver, myDAQ, AUX cable, connector)
18 EMONA SIGEX SIGNALS AND SYSTEMS EXPERIMENTER BOARD
15
FOR ELVIS (BOARD ONLY) (board+CD+manual+3 black cables+4
yellow+4 blue)
19 NI Elvis II + Hardware (For academics use only) (main assembly) 10
20 COMMUNICATION SYSTEMS MIMP TEACHING BUNDLE, 2X USRP- 24
2901, CABLES, COURSEWARE
21 EMONA myDSP(5 Pieces in each box) 5

Embedded Computing lab

Equipment Description

50 Logic Trainers with the following features:

● Logic inputs
● Logic outputs
Digital Logic Trainers
● Clock generation
● DC Power supply for circuits
● BCD-to-seven-segment display
● Logic probe
Basic ICs for Digital Around 25 different types of 7400 series ICs, ADCs, memory ICs
Logic Design Lab (RAM and ROM), etc.

8051 microcontroller 8051 microcontroller kits with the following features:

kits
 ● 1 microcontroller socket
● 1×8 female headers for all 4 ports of microcontroller
● 1×8 LED banks connected to all ports
● RS 232 socket connected to the microcontroller through
MAX232
● 16×2 LCD attachment socket
● Reset button
● On board VCC (5V) and ground connection
● Input socket for 9V adapter
50 embedded development devices based on the Xilinx Zync
NI MyRIO 1900
7010 SOC

Digilent Nexys4 FPGA

12 Xilinx Artix7 FPGA based development boards
development board

NI MYRIO Mechatronics 50
Kits

NI MYRIO Starter Kit 50

NI MYRIO Embedded 50
Kit

G540 MCU programmer 2 programmers for MCUs

PICkit 3 10

Raspberry Pi 2 Model B 5

STM32F4-Discovery 25 STM32F407 MCU based microcontroller development board

STM32 IoT Node 40 STM32L475 MCU based IoT device

Resistors, Capacitors, Inductors, LEDs, wire, keypads, LCDs,

Other
stepper motors, DC motors, small transformers, DC batteries,
minor/consumable
headers, connectors, switches, Raspberry Pi, Arduino UNO, PIC
items
microcontrollers etc.

Utility equipment (tools) Wire strippers, wire cutters, soldering irons, glue gun, pliers,
screw-driver kits.
Other than the hardware equipment, the Embedded Lab has 50 PCs (Optiplex 390, core i3
and core i5) and a seating capacity for more than 50 persons. The PCs are installed with the
latest software applications relevant to Embedded Systems including:

1. MATLAB
2. Multisim 13.0
3. Proteus 8 Professional
4. Keil μVision 5
5. Visual Studio
6. ModelSim Altera 10.1
7. Arduino IDE

This list is also updated on a regular basis.

COMPUTER LAB

• Facilities: Seating facility for 90 students. Each computer has Visual Studio, DevC and
Python installed.

Well equipped to hold the following BSCE labs

• CE Engineering Foundation: Computer Fundamentals & Programming, CAD, OOP, DSA.

• Breadth, Core & MDEEs Courses: Operating Systems, Database Management Systems,
Computer Networks, Computer Graphics, Parallel & Distributed Computing, Data
warehousing & Mining, Cloud Computing & Big Data Analytics.

CIRCUITS LAB

 Facilities: Computers, Power Supplies, Multimeter, Oscilloscope, Function

Generators, hand-held DMMs, and basic components (resistors, capacitors,
inductors, diodes, op-amps, transistors etc.) required for electronics courses lab
are available. Multisim, Proteus are installed on each PC.
 CE Engineering Foundation: Linear Circuit Analysis, Electronic System
Design.
Has a dedicated workplace for Soldering, PCB & Automation related Final Year
Projects (7th/8th Semester)

PROGRAMMING LAB
  Facilities: Seating facility for 40 students. Computers with Wi-Fi and
Multimedia. Each has Visual Studio, Dev C++, Cylion, Cygwin, GitHub
Desktop, Power Bi installed.
Well equipped to hold the following BSCE labs:
 CE Engineering Foundation: Computer Fundamentals & Programming,
CAD, OOP, DSA.
 Breadth, Core & MDEEs Courses: Operating Systems, Computer Networks,
Computer Graphics, Parallel & Distributed Computing, Data warehousing &
Mining, Cloud Computing & Big Data Analytics.

HIGH PERFORMANCE COMPUTING LAB

 Facilities: Seating facility for 45 students. Computers with Wi-Fi and

Multimedia. Access to HPC (High Performance Computing Facility). GPU
Compatible Core i-7 11th Gen. Workstation with 16GB RAM are being
sourced as well. Each computer has Android Studio, Solid Works, Xilinix
Vivado, and Cisco Packet Tracer installed.
Well equipped to hold the following BSCE labs:

 CE Engineering Foundation: Computer Aided Engineering Design,

Computer Organization and Architecture, Computer Communication and
Networks, Mobile App Development.


 Breadth, Core & MDEEs Courses: Operating Systems, Database

Management Systems, Computer Networks, Computer Graphics, Parallel &
Distributed Computing, Data warehousing & Mining, Cloud Computing & Big
Data Analytics.

HIGH PERFORMANCE CENTRE – HPC

• Facilities: HPC Facility at Computer Engineering Department provides

computer servers for a variety of teaching courses and research.
• Notable Server:
• IBM System x3650-M4, Power Supply:550w x 2 (One Supply Active),
Memory: 240 GB, Processor: Xeon E5 2690 3.00 GHzX2
• H3C Uni Server R4900 G3, Power Supply: 1100 w x 2,
Storage: 690 x 8 SSD
• Provides support for Industrial IoT, Database Management Systems, VLSI
Systems, Data warehousing & Mining, Cloud Computing & Big Data
Analytics.
• This enables the training on modern toolchain for digital design.
• For CE courses such as : Digital System Design, VLSI, Design Verification

Tools Explanation
Cadence Chip Design. Link
Xcellum Logic simulation. Link
Spectre Block-level, chip-level, and mixed signal simulation. Link
Innovus A physical implementation tool. Link
Virtuoso IC layout tool. Link
Conformal Formal verification. Link
Allegro PCB Designer. Link
Genus Synthesis solution. Link
Modus Testing. Link
Tempus Timing signoff. Link
Voltus Power signoff and design closure. Link