V4.70.
1A Summary of Firmware Changes
Release date: 12 July 2006
This firmware release includes all features of the previous V4.59 release. It is for use with
the following EPL printer models:
• LP 2844
• TLP 2844
New Features
• This version supports an alternate Flash memory device. This change is transparent
to the user.
• The head up sensor can now be enabled or disabled. The default condition is
enabled. The command to disable the head up sensor is Oh0. The command to re-
enable the head up sensor is Oh1.
• Updated EAN128 barcode application identifiers, series 4xx, 7xxx, 8xxx and 90.
Issues Corrected
• Corrected an issue where the timestamp string (TT) was corrupted in a Code128
barcode.
• Corrected an issue relating to the compaction of Datamatrix barcodes. Some
barcodes will now appear smaller in size due to the correction in the compaction
algorithm.
• Corrected an issue where the printer would occasionally stall in Line Mode causing
inconsistent print positioning.
• Corrected an issue where a combination of JB, Qx,0 with x less than 96 did not
detect media out.
• Corrected a PDF417 issue where a combination of parameters and data produced a
non scannable symbol or no symbol at all.
• Corrected an issue where MSI barcodes produced at 90 or 270 degrees would not
scan.
• Corrected an issue where double responses to the ^ee command could occur over
the USB port.
• Improved the USB communications to handle more ^ee requests.
© 2006 ZIH Corp. All product names and numbers are Zebra 07/28/2006
Trademarks, and Zebra and the Zebra logo are registered
Trademarks of ZIH Corp. All rights reserved.
