D A T A S H E E T

Power Supplies

DC-DC Converters
Mini Encapsulated - with screw terminals
REGULATED
single & dual tracking outputs
• Shipped Within 3 Days
• One Year Warranty
RoHS
COMPLIANT

Don’t forget these facts about Acopian....

• Fast Shipping? Acopian invented it! For over half a century, Acopian has built and shipped
millions of power supplies within 3-DAYS after receipt of order. And we still do today!
View our 3-DAY Shipping Promise: www.acopian.com/3dayship.html
• You ALWAYS talk to a real person when you call Acopian.
• Acopian power supplies last a very long time!
• You can email [email protected] anytime for 24/7 product support.
• The Online System Builder (www.acopian.com/SystemBuilder) is a convenient way to
get your own custom power supply or power system (and most ship within 9 Days).
• You can order Acopian power supplies factory direct.
• ALL Acopian products are made in the USA.

POWER SUPPLIES
Easton, PA & Melbourne, FL
1-800-523-9478 • www.acopian.com
Order Factory Direct
Made in USA
 DC-DC Converters
Mini Encapsulated - with screw terminals
REGULATED
single & dual tracking outputs
DC – DC CONVERTERS

• Shipped Within 3 Days

• One Year Warranty
RoHS
COMPLIANT

These DC-DC Converters have the versatility to be used Input/output isolation prevents ground loops, and permits
in a broad range of applications. Threaded mounting holes the use of inputs of either polarity; outputs of single output
permit them to be mounted to a chassis, cabinet wall or models may be used in either polarity and floated up to
bracket, or they may be used on a test bench or tabletop. 500 volts above the input. Short circuit and thermal
Screw terminals provide easy connectionwithout sockets protection, and rugged encapsulated construction, assure
or soldering. years of reliable service.

SPECIFICATIONS
Input Voltage: Nominal voltage ±10%.
Input Reflected Ripple: 1% Ein (max.)
Output Ripple (@25 MHz bandwidth):
1 mV rms, 50 mV p-p (5-15V outputs).
1.5 mV rms, 75 mV p-p (18-28V outputs).
Output Voltage Setting: Outputs are factory preset to
within ±1% of the nominal output voltage.
T/C terminal: For single output models, the T/C terminal
can be used to trim the output more precisely to the
nominal voltage rating by connecting an external resistor
from the T/C terminal to either the + or – terminal. For dual
output models, the T/C terminal is the output common.
Polarity: The output of single output models may be
connected in either polarity. Dual output models have a
positive/common/negative output terminal configuration.
Transient Response (NL-FL): 50 microseconds.
Overload/Short Circuit Protection: Electronic current
limiting with automatic recovery. All models have thermal
protection with automatic reset.
Input/Output Isolation:
Voltage: 500 Vdc
Resistance: 100 megohms
Capacitance: 100 pF
Switching Frequency: 20 kHz minimum.
Temperature Coefficient: 0.02%/°C (Typical).
Ambient Operating Temperature: – 20 to +71°C. Case Size EBC-10
Storage Temperature: – 40 to +85°C. Approx. Weight: 14 oz.
Humidity: 20% to 80% R.H. (non-condensing).
All dimensions in inches.
Case Size: EBC-10.
Mounting: Threaded mounting holes permit mounting to
a chassis, cabinet wall or bracket, or they may be used
on a test bench or tabletop. When wall-mounting or DIN
rail mounting is desired, use accessory Mounting Kits on
page H4.

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
D3 131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
211108
DC-DC Converters
Mini Encapsulated - with screw terminals

DC – DC CONVERTERS
SINGLE OUTPUT, WITH SCREW TERMINALS
Nominal Nominal Output Current Nominal Nominal Output Current
Input Output Amps. at Regulation Input Output Amps. at Regulation
Voltage Voltage 40°C 55°C 71°C Load ±% Line ±% Model Voltage Voltage 40°C 55°C 71°C Load ±% Line ±% Model
5 5 2.50 2.25 2.00 .15 .02 5EB5E250 15 13 1.10 1.00 .90 .05 .02 15EB13E110
5 6 2.00 1.80 1.60 .15 .02 5EB6E200 15 15 1.00 .90 .80 .05 .02 15EB15E100
5 8 1.50 1.35 1.20 .10 .02 5EB8E150 15 18 .80 .70 .60 .05 .02 15EB18E80
5 9 1.40 1.25 1.10 .10 .02 5EB9E140 15 20 .70 .60 .50 .05 .02 15EB20E70
5 10 1.30 1.15 1.00 .10 .02 5EB10E130 15 24 .60 .55 .50 .05 .02 15EB24E60
5 12 1.20 1.10 1.00 .05 .02 5EB12E120 15 28 .50 .45 .40 .05 .02 15EB28E50
5 13 1.10 1.00 .90 .05 .02 5EB13E110 24 5 2.50 2.25 2.00 .15 .02 24EB5E250
5 15 1.00 .90 .80 .05 .02 5EB15E100 24 6 2.00 1.80 1.60 .15 .02 24EB6E200
5 18 .80 .70 .60 .05 .02 5EB18E80 24 8 1.50 1.35 1.20 .10 .02 24EB8E150
5 20 .70 .60 .50 .05 .02 5EB20E70 24 9 1.40 1.25 1.10 .10 .02 24EB9E140
5 24 .60 .55 .50 .05 .02 5EB24E60 24 10 1.30 1.15 1.00 .10 .02 24EB10E130
5 28 .50 .45 .40 .05 .02 5EB28E50 24 12 1.20 1.10 1.00 .05 .02 24EB12E120
12 5 2.50 2.25 2.00 .15 .02 12EB5E250 24 13 1.10 1.00 .90 .05 .02 24EB13E110
12 6 2.00 1.80 1.60 .15 .02 12EB6E200 24 15 1.00 .90 .80 .05 .02 24EB15E100
12 8 1.50 1.35 1.20 .10 .02 12EB8E150 24 18 .80 .70 .60 .05 .02 24EB18E80
12 9 1.40 1.25 1.10 .10 .02 12EB9E140 24 20 .70 .60 .50 .05 .02 24EB20E70
12 10 1.30 1.15 1.00 .10 .02 12EB10E130 24 24 .60 .55 .50 .05 .02 24EB24E60
12 12 1.20 1.10 1.00 .05 .02 12EB12E120 24 28 .50 .45 .40 .05 .02 24EB28E50
12 13 1.10 1.00 .90 .05 .02 12EB13E110 28 5 2.50 2.25 2.00 .15 .02 28EB5E250
12 15 1.00 .90 .80 .05 .02 12EB15E100 28 6 2.00 1.80 1.60 .15 .02 28EB6E200
12 18 .80 .70 .60 .05 .02 12EB18E80 28 8 1.50 1.35 1.20 .10 .02 28EB8E150
12 20 .70 .60 .50 .05 .02 12EB20E70 28 9 1.40 1.25 1.10 .10 .02 28EB9E140
12 24 .60 .55 .50 .05 .02 12EB24E60 28 10 1.30 1.15 1.00 .10 .02 28EB10E130
12 28 .50 .45 .40 .05 .02 12EB28E50 28 12 1.20 1.10 1.00 .05 .02 28EB12E120
15 5 2.50 2.25 2.00 .15 .02 15EB5E250 28 13 1.10 1.00 .90 .05 .02 28EB13E110
15 6 2.00 1.80 1.60 .15 .02 15EB6E200 28 15 1.00 .90 .80 .05 .02 28EB15E100
15 8 1.50 1.35 1.20 .10 .02 15EB8E150 28 18 .80 .70 .60 .05 .02 28EB18E80
15 9 1.40 1.25 1.10 .10 .02 15EB9E140 28 20 .70 .60 .50 .05 .02 28EB20E70
15 10 1.30 1.15 1.00 .10 .02 15EB10E130 28 24 .60 .55 .50 .05 .02 28EB24E60
15 12 1.20 1.10 1.00 .05 .02 15EB12E120 28 28 .50 .45 .40 .05 .02 28EB28E50
120 to 180 See pages C1-C2.

DUAL TRACKING OUTPUTS

Nominal Nominal Amps. per Output Nominal Nominal Amps. per Output
Input Output at Regulation Input Output at Regulation
Voltage Voltages 40°C 55°C 71°C Load ±% Line ±% Model Voltage Voltages 40°C 55°C 71°C Load ±% Line ±% Model
5 ±10 .60 .55 .50 .05 .02 5EB10D60 15 ±15 .50 .45 .40 .05 .02 15EB15D50
5 ±12 .60 .55 .50 .05 .02 5EB12D60 15 ±18 .40 .35 .30 .05 .02 15EB18D40
5 ±15 .50 .45 .40 .05 .02 5EB15D50 24 ±10 .60 .55 .50 .05 .02 24EB10D60
5 ±18 .40 .35 .30 .05 .02 5EB18D40 24 ±12 .60 .55 .50 .05 .02 24EB12D60
12 ±10 .60 .55 .50 .05 .02 12EB10D60 24 ±15 .50 .45 .40 .05 .02 24EB15D50
12 ±12 .60 .55 .50 .05 .02 12EB12D60 24 ±18 .40 .35 .30 .05 .02 24EB18D40
12 ±15 .50 .45 .40 .05 .02 12EB15D50 28 ±10 .60 .55 .50 .05 .02 28EB10D60
12 ±18 .40 .35 .30 .05 .02 12EB18D40 28 ±12 .60 .55 .50 .05 .02 28EB12D60
15 ±10 .60 .55 .50 .05 .02 15EB10D60 28 ±15 .50 .45 .40 .05 .02 28EB15D50
15 ±12 .60 .55 .50 .05 .02 15EB12D60 28 ±18 .40 .35 .30 .05 .02 28EB18D40

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
D4
211108
 MOUNTING KITS & SOCKETS
Mounting Kits for ‘Mini Encapsulated - with screw terminals’ power supplies:
WALL MOUNTING DIN RAIL MOUNTING
Model EB4A Model EB35DIN
Use Mounting Kit EB4A to mount from Mounting Kit EB35DIN consists of an

OTHER PRODUCTS & INFO

the power supply side of the mounting aluminum plate, with two DIN clips
surface, necessary when the other attached to it, and four screws for

M iniEncapsulated
side of the mounting surface is attaching the plate to the bottom of

Pow erSupply
inaccessible. This kit consists of an any Mini Encapsulated power supply
aluminum plate and four screws for with screw terminals or any Mini
attaching it to the power supply, DC-DC Converter with screw
effectively adding mounting flanges to terminals. The power supply can then
any Mini Encapsulated power supply be snapped onto a 35mm ‘top hat’
with screw terminals or any Mini type of DIN rail.
DC-DC Converter with screw
terminals.

Sockets for ‘Mini Encapsulated - PC Board mounting’ power supplies:

For use with PC board mounting Mini Linears and PC board mounting DC-DC Converters.
Each of these sockets has a sturdy phenolic base with gold plated teflon-insulated contacts.

Model ES-1 Model EL-1 Model ELW-1

For case sizes ES-10 and ESC-10 For case sizes EL-10, EL-13, EL-20 and ELC-10 For case sizes ELW-13 and ELW-20

Sockets for ‘Plug-In’ power supplies:

RETMA-numbered screw-type terminals simplify wiring and permit the use of wire terminals or
bare wire, 12 to 20 guage. Rated at 300 volts RMS, 10 amp.

Model SL608 Model SL611

For 8-pin plugs. For 11-pin plugs.

All dimensions in inches.

All dimensions in inches.

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
H4
211108
 ORDERING INFO / TERMS & CONDITIONS
ACOPIAN SELLS FACTORY DIRECT WORLDWIDE: We do not use representatives or distributors. Contact Acopian for technical information or a quote.
WARRANTY: Acopian power supplies are warranted to be free from defects in material and workmanship for a period of five years (encapsulated devices, for
one year) from date of original shipment. Acopian’s obligation under this warranty is limited to repairing any power supply returned to the factory Service
Department in Easton, PA or Melbourne, FL, and replacing any defective parts. Mini Encapsulated power supplies are not repairable. Authorization must be
obtained from Acopian before a power supply may be returned for repair. Units must be well packed when shipping to Acopian; the repair of any damage incurred

OTHER PRODUCTS & INFO

during shipment will be charged. Transportation charges are to be paid by the purchaser. A reinspection and handling charge will be applied to returned units
found to have no defects. If a failure has been caused by misuse, operation in excess of specifications, or modification by the customer, repairs will be billed
at cost; in such cases, a cost estimate will be submitted before work is started.
Acopian reserves the right to make changes or improvements in its products without incurring any obligation to install the same on products previously
manufactured.
This warranty is in lieu of all other warranties, obligations, and liabilities, expressed or implied, and is the purchaser’s exclusive remedy. Acopian makes
no warranty, either express or implied, of merchantability, fitness for a particular purpose or otherwise. In no event shall Acopian be liable whether in contract,
tort, or negligence, for special, indirect, incidental or consequential damages of any kind, including loss of business or profits, or any other losses incurred by
the purchaser or any third party, the Customer’s remedies being limited, at Acopian’s option, to replacement, repair or credit at the price on the date of claim.
The validity, performance and construction of all terms and conditions and any sale made by Acopian shall be determined by the law of Pennsylvania,
without regard to its conflict of law principles, and all parties to the transaction expressly consent to the jurisdiction of such courts and consent to the venue of
the Court of Common Pleas for Northampton County, Pennsylvania.
PRICES: The prices shown are F.O.B. our factory; Easton, PA or Melbourne, FL. (‘EXW Factory’ if outside the 50 United States.) All prices and specifications
are subject to change without notice.
TERMS: Net 30 days, subject to credit approval. Visa, MasterCard and American Express also accepted.
SHIPPING: Location permitting, small shipments are made by United Parcel Service, FedEx, DHL (international orders) or by Parcel Post; larger shipments,
by insured motor freight collect. Shipments can be made by air upon request. Risk of loss shall be F.O.B. Our Factory, even in cases where freight may be
prepaid or allowed to destination by Acopian. If equipment is received in damaged condition, it is the customer’s responsibility to contact the carrier and file a
claim for damages.
TIME FOR DELIVERY: The time for delivery quoted by Acopian is the time required to ship from our plants. We will not be liable for delays in delivery caused
by any reason beyond our control, including but not limited to acts of God, casualty, civil disturbance, labor disputes, transportation or supply difficulties, or any
interruption of our facilities, and the quoted time for delivery shall be extended during the continuance of such conditions and for a reasonable time thereafter.
In no event will Acopian be liable for any premium transportation, reprocurement, or similar costs incurred by the Customer as a result of conditions beyond
Acopian’s control resulting in Acopian’s inability to deliver product in accordance with customer’s requested delivery schedules.
QUANTITY DISCOUNTS: Discounts are available to quantity buyers and are dependent upon the order quantity and the manufacturing scheduling anticipated
by the order, and apply only to the quantity and delivery ordered. Partial shipments are considered as separate orders for discounting purposes.
EXPORT ORDERS: A minimum export documentation charge of $60.00 applies. (A minimum charge of $25.00 applies on orders to certain U.S. territories
requiring customs forms.)
MOISTURE/FUNGUS PROOFING: Power supplies can be furnished with a moisture and fungus resistant varnish applied to interior surfaces. To order, add
the suffix letter F to the model number. This option requires two additional days and is not available on High Voltage, Mini Encapsulated, Rack Mounting, and
Gold Box Switching models.
TAGGING: Add $10.00 to price.
TEST DATA: Cost, $35.00 or 2% of order, whichever is greater.
SPECIAL MODELS/MODIFICATIONS: Cataloged models can be altered at the factory to meet special requirements. Contact the Applications Engineering
Department to discuss your needs.
PARTS: The designs used in Acopian power supplies utilize standard components to the greatest practical extent. When replacements are required, the types
originally used, or their equivalents, can usually be obtained most quickly from a local electronic components distributor.
Special components, such as transformers, are stocked at the factory warehouses. Contact the Applications Engineering Department for information on
the parts required, referencing the model number of the power supply, the circuit designation of the component, and a description.
PURCHASE ORDER ACCEPTANCE: Orders are accepted subject to Acopian’s Terms and Conditions. Any Terms and Conditions of any Purchaser’s order,
agreement, or understanding which are in addition to or inconsistent with Acopian’s shall not be binding upon Acopian unless made in writing and accepted
over the signature of an authorized officer of Acopian. Orders shall not be considered accepted until entered into production at our plant. Acopian reserves the
right to refuse any order. All typographical and clerical errors are subject to correction by Acopian.
RETURNED GOODS: Acopian products are built on a per-order basis, and ordinarily no credit can be extended for their return. No goods will be accepted for
return unless authorized in writing by Acopian.
CHANGES: The customer may, by a written notice, request changes within the general scope of the order, in the drawings, designs or specifications; method
of shipment; and place of delivery. If any such change causes an increase or decrease in the cost, or the time required for the processing of any part of the
order, an equitable adjustment shall be made in the price or delivery schedule, or both, and the order shall be modified in writing accordingly.
CANCELLATION: Suspension or cancellation of orders may be made only upon our written approval and on terms that will indemnify us against all loss.
OVERTIME: It is anticipated that any order will be processed during regular working hours on regular working days. If for any reason the Purchaser requests
Acopian to process the order, or any portion of it, outside of such regular working hours, any overtime or other additional expense occasioned thereby shall be
billed to and paid by the Purchaser as an extra cost. Acopian reserves the right to decline to process the order outside regular working hours.
CUSTOMER DELAY OF WORK: If the performance of all or any part of the work is delayed or interrupted by Customer’s failure to act within the time specified
(or within a reasonable time if no time is specified) and such act is not expressed or implied by the order, an adjustment shall be made in the cost of performance
of the order caused by such delay or interruption and the order modified in writing accordingly. Adjustment will also be made in the delivery or performance
dates and any other contractual provisions affected by such delay or interruption.
GOVERNMENT SPECIFICATIONS: Pricing is based upon industrial-grade construction, marking, packing, and packaging. Exception is taken to any MIL
specifications, and to any requirements for the use of special forms, documentation other than quoted, and Government Source Inspection. Acopian must decline
to quote on any other basis.
APPLICATIONS ASSISTANCE: Questions regarding the specifications, features, and use of any Acopian product should be directed to the
Applications Engineering Department. A staff of power supply specialists will be pleased to assist you.
ACOPIAN IS AN ISO 9001 CERTIFIED COMPANY

Online Ordering and Instant Quotes for ALL Acopian power supplies at www.acopian.com
131 Loomis Street, Easton, PA 18045 • Phone: (610) 258-5441 • FAX: (610) 258-2842
H8
211108