Differential pressure
Differential pressure switch mechanical
Model DPSM-550
WIKA data sheet DPSM-550
Applications
■■ Pumps
■■ Compressors
■■ Filters
■■ Evaporators
■■ Hydraulic systems
■■ Marine equipment
■■ Turbines
Special features
■■ Wide adjustable range
■■ Adjustable on-off differential
■■ Sturdy snap action switch
■■ High repeatability
■■ Dough mould compound (DMC) enclosure
■■ Weatherproof to IP67
Differential pressure switch mechanical,
model DPSM-550
Description
The model DPSM-550 is used in industrial control,
monitoring and alarm applications. The switch point can be
specified by the customer on site. The instrument can switch
electrical loads of up to AC 230 V, 10 A. The DPSM-550
differential pressure switch offers many application
possibilities with non-corrosive media like oil, water and air.
Switzer data sheet DPSM-550 ∙ 10/2020 Page 1 of 3
Ordering matrix
Maximum test Standard version
Adjustable differential
pressure (bar) Permissible ambient temperature
Range Contact –40°C ... 70°C
Model DPDT Code
(bar) system / Code
micro 41 & Permissible medium temperature
1 SPDT 11
switch 22 ■■ –20°C ... 70°C for code 11 and 41
microswitch
■■ –20°C ... 170°C for code 22
K1 0.1 ... 1.5 0.15 ... 1.4 0.3 ... 1.7 15 25
K2 0.2 ... 4 0.3 ... 1.7 0.5 ... 2.1 15 25 Electrical entry
1/2" NPT(F)
K3 1 ... 6 0.5 ... 2.8 0.8 ... 3.0 25 45
Repeatability
± 1% FSR
Notes:
1. For Ammonia service sensing shall be 316 SS bellows Mounting
with treated steel wetted parts. Back Panel / Wall / Pipe
2. Process connection : G 3/8 B standard. Others through Confirmity
adaptor. Generally to BS : 6134 : 1991
Sensing element
11 Copper alloy (PB) Bellows with brass wetted Parts –
standard Model Number to be ordered as below
41 304 SS Bellows with brass wetted parts
22 316 SS Bellows with 316 SS wetted parts Sensing Switch
Model Range Enclosure
element element
Switching element
Example DPSM-550-K1-41-C-D
C One SPDT contact system
Model: K1
S One SPDT microswitch
Range: 0.1 ... 1.5 bar
D DPDT microswitch
304 SS Bellows with brass wetted parts
1 SPDT contact system
Electrical rating for contact system
DMC housing, weatherproof to IP:67
Current consumption 1) Voltage Current
as per IEC:60529-2001
Resistive load AC-1 AC 230 V, 50/60 Hz 10 A
Inductive load AC-15 AC 230 V, 50/60 Hz 4A
Direct load DC-13 DC 230V 12W
1) Low port, falling pressure and High port, rising pressure
ONE SPDT Microswitch
15A Res. 125 / 250V AC
15A Ind. 125 / 250V AC
0.5A Res. 125V / 0.25A 250V DC
6A Ind. 30V / 0.05A 125V / 0.03A 250V DC
DPDT Microswitch
10A 125 / 250 V AC, 2A 480V AC
0.25A 250V DC
Enclosure
D DMC Enclosure, weatherproof to IP:67 as per
IS/IEC:60529-2001 – Std.
A Die cast Aluminium housing, weatherproof to IP:67 as per
IS/IEC:60529-2001
WIKA data sheet DPSM-550 ∙ 12/2021 Page 2 of 3
Dimensions in mm
Ordering information
Model / Range / Sensing element / Switch element / Enclosure
© 2021 WIKA Instruments India Pvt. Ltd., all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.
WIKA data sheet DPSM-550 ∙ 12/2021 Page 3 of 3
WIKA Instruments India Pvt. Ltd.
Plot no B-20 and B-21, Industrial area
Site-3, Meerut Road
Ghaziabad 201003, Uttar Pradesh
Tel. +91 0120-2712134
[email protected] www.wika.co.in
