Vertiv™ VR Rack
Selection Guide
Vertiv™ VR Rack
Rapid Deployments High Density Cable Doors
Everywhere You Operate Entry Top Panel Single and split 77%
Removable openings for perforated doors
Standardize your deployments around cable entry — ready for providing maximum
the world and bring them online faster front / rear cabling. Can airflow. Lift off hinges
with the Vertiv™ VR rack. The Vertiv accommodate over for easy removal, and
VR Rack supports a wide variety of 2000 Cat 6 cables. field reversibility.
equipment, including: servers, storage,
switches, routers, PDUs, UPSs, console Frame
port servers and KVM switches. More usable depth
compared to similar
The Vertiv VR Rack is delivered ready for sized rack.
high density environments to serve your
mission critical needs — even as they
evolve and change. This rack gives you the
flexibility you need with easy installation.
The Vertiv™ VR Rack offers
these advantages: Tool-less Cable
y Available in 10 standard sizes. Management
y Full depth adjustability of the 19” rails. Requires just inserting
and twisting the tool-
y Frame design allow for more than less accessories on 19"
2.5” more usable depth than similar
vertical mounting rail,
sized racks.
or the PDU / cable
y Doors that have 77% perforation and management brackets.
can be hinged on either side.
y Tool-less removable top panel has four
cable entry holes allowing for up to
2000 Cat6 cables, or 60A PDU plugs.
y Two dual purpose full height depth
adjustable PDU / cable management
brackets mounted in the zero U space
with tool-less button mounting of rack Integrated 19”
PDUs, accessory mounting holes Rail Alignment
for tool-less cable management Ensures 19" rails are
accessories, and integrated cable tie positioned correctly
off positions. without measuring.
y 42U frame height that allows for the
rack to pass through standard doors
on casters.
y Simple external baying, allows for
metric baying or on 24” centers.
y Split side panels with single locking
slam latch allows for easy single Split Locking
person removal / installation. Side Panels Leveling Feet
For quick and easy Accessible from
Pre-Integrated Rack PDUs
Save time and money by pre-integrating Vertiv™ installation and the top of the
Geist™ rPDUs with the Vertiv™ VR Rack. Contact your maintenance. Locks frame for easy
local sales representative to get started. provide security. adjustment.
2
Vertiv™ VR Rack Complete Rack Complete rack includes:
Part Number U Height Mm (Inches)* Width Mm (Inches)* Depth Mm (Inches)* y Single 77% perforated locking
front door.
VR3100 42 2000 (78.6") 600 (23.6") 1100 (43.3")
y Split 77% perforated locking
VR3100SP 42 2000 (78.6") 600 (23.6") 1100 (43.3")
rear doors.
VR3300 42 2000 (78.6") 600 (23.6") 1200 (47.8")
y 2 pair split locking side panels.
VR3300SP 42 2000 (78.6") 600 (23.6") 1200 (47.8")
y High density cable entry top
VR3150 42 2000 (78.6") 800 (31.5") 1100 (43.3")
cover (2000 Cat 6 cables).
VR3150SP 42 2000 (78.6") 800 (31.5") 1100 (43.3")
y 2 sets of 19” EIA Rails.
VR3350 42 2000 (78.6") 800 (31.5") 1200 (47.8")
y 2 full height rack PDU Mounting /
VR3350SP 42 2000 (78.6") 800 (31.5") 1200 (47.8")
cable management brackets
VR3107 48 2265 (89.2") 600 (23.6") 1100 (43.3") (one per side).
VR3107SP 48 2265 (89.2") 600 (23.6") 1100 (43.3") y Low profile casters and leveling feet.
VR3307 48 2265 (89.2") 600 (23.6") 1200 (47.8")
y Baying brackets.
VR3307SP 48 2265 (89.2") 600 (23.6") 1200 (47.8")
y Bolt down brackets.
VR3157 48 2265 (89.2") 800 (31.5") 1100 (43.3")
y Hardware includes (50 each M6 cage
VR3157SP 48 2265 (89.2") 800 (31.5") 1100 (43.3")
nuts and screws), Cage nut installation
VR3357 48 2265 (89.2") 800 (31.5") 1200 (47.8") tool, edge protection for top panel
VR3357SP 48 2265 (89.2") 800 (31.5") 1200 (47.8") cable entry, T30 / Phillips L key, T30
extension driver.
*Nominal dimensions, reference submittal drawings for exact dimensions
VRXXXXSP ship with 2000 lb. rated shock packaging y Keys.
Features
Frame Top Panel PDU / Cable Management Brackets
Two dual purpose full height depth adjustable
Frame capable of supporting up to 3000 lbs (1360kg) Tool-less removeable top panel.
PDU / Cable Management brackets mounted in
Static, 2250 lbs (1022kg) Dynamic, 2000 lbs (907kg)
the zero U space.
Transport (with Shock Package). Integrated hole pattern for easy installation of top
panel accessories (cable management, modular Button mount keyholes throughout to
busway support brackets, ladder / cable tray accommodate tool-less button mounting of
Simple external baying, allows for metric or on 24”
support brackets). rack PDUs of various heights.
centers and leveling feet incorporated into the frame
for easy adjustment. Four cable entry holes allowing for up to 2000 Cat6 Accessory mounting holes allow for mounting
cables, or 60A PDU plugs. of tool-less cable management accessories.
42U frame height that will allow access through Top Panel load capacity of 150 lbs. Integrated cable tie off positions.
standard doors on four swivel casters.
Depth adjustable.
19” Mounting Rails
Door & Side Panels
(2) Pair of full height 19” EIA mounting rails, accepts
Color
Single perforated front door and split rear cage nuts, U markings on front and rear of each rail. Frame, doors, side panels, top panel, rails and PDU
doors with tool-less lift off hinges.
brackets are powder coated RAL 7021 (Black).
Depth markings included on frame for easy alignment.
Locking handles.
Certifications
Accessory mounting holes along rails allow for
mounting of cable management fingers and EIA 310E
Field reversible doors.
tool-less accessories.
Rectangular cutouts for routing cables through UL2416
77% perforation exceeds IT 800mm (31.5”) wide 19” EIA rails from front to rear
manufacturers specifications. or for airflow for side breathing equipment. RoHS
Split side panels with single locking slam latch. Full depth adjustability within the usable space.
REACH
3
Vertiv™ VR Rack
Cable Management
Horizontal Cable Organizers with Metal D Rings
19" rack mounted cable routing panels with D rings provide the solution for
loose cables in the front or rear of your rack. Panels available in 1U and 2U
heights. Color: black.
Part Number Description
VRA1000 1U Horizontal Cable Organizer with Metal D Rings (Qty. 1)
VRA1001 2U Horizontal Cable Organizer 2U with Metal D Rings (Qty. 1) VRA1000 VRA1001
Horizontal Cable Managers with Covers
19" Horizontal Cable Manager with cover. Mounts on the EIA rails to easily
manage cables. Available with 4” deep or 6” deep finger sections. Color: black.
Part Number Description
VRA1002 Horizontal Cable Manager, 1U x 4" Deep, Single-Sided with Cover (Qty. 1)
VRA1003 2U x 4" Deep Horizontal Cable Manager, Single-Sided with Cover (Qty. 1)
VRA1022 2U x 6" Deep Horizontal Cable Manager, Single-Sided with Cover (Qty. 1)
VRA1023 1U x 6" Deep Horizontal Cable Manager, Single-Sided with Cover (Qty. 1)
VRA1002 VRA1022
Tool-Less Cable Management: Lobster Claw
1/4 Turn Tool-less Cable Management Lobster Claw offers the ultimate in
flexibility in cable management for moves, adds, and changes. Lobster claws
install on 19" vertical mounting rails. Claw can also be installed on PDU/cable
management rails. Color: black.
Part Number Description
VRA1004 Tool-Less Cable Management -Lobster Claw (Qty. 10)
VRA1006 Tool -Less Cable Management -Lobster Claw (Qty. 100)
VRA1004
Tool-Less Cable Management: Velcro Strap
1/4 turn tool-less cable management Velcro Straps offers the ultimate in
flexibility in cable management. These can be installed on the outside edge of
the 19" rail or on the PDU/cable management rail. Color: black.
Part Number Description
VRA1005 Tool Less Cable Management - Velcro Strap (Qty. 10)
VRA1007 Tool Less Cable Management - Velcro Strap (Qty. 100)
VRA1005
1/4 Turn Tool-Less Cable Management: D Rings
1/4 Turn Tool-less Cable Management D Rings offer the ultimate in flexibility in
cable management. These can be installed on the 19" rail or on the PDU/ Cable
Management rail. Color: black.
Part Number Description
VRA1008 Tool-less D Rings Small (Qty. 10)
VRA1009 Tool-less D Rings Small (Qty. 100)
VRA1010 Tool-less D Rings Large (Qty. 10)
VRA1011 Tool-less D Rings Large (Qty. 100) VRA1008 and VRA1009 VRA1010 and VRA1011
Horizontal Cable Manager Side Channel
The Horizontal Cable Manager Side Channel manages cables from the front to
rear of 800 wide racks. Depth adjustability allows for installation in racks with
different rail spacing. Color: black.
Part Number Description
VRA1013 Horizontal Cable Organizer Side Channel 20 to 33 inch adjustment (Qty. 1)
VRA1024 Horizontal Cable Organizer Side Channel 22 to 38 inch adjustment (Qty. 1) VRA1013
Vertical Cable Management Kit
Vertical Cable Finger Sections can be installed on front or rear 19" rails; Fingers
align with "U" marking to create clean cable pathways, providing a vertical row
of cable management fingers. The 600 mm wide version has a single row of
vertical fingers, the 800mm wide version as two rows. Color: black.
Part Number Description
VRA1014 Vertical Cable Manager 600mm Wide 42U (Qty. 2)
VRA1015 Vertical Cable Manager for 600mm Wide 48U (Qty. 2)
VRA1016 Vertical Cable Manager for 800mm Wide 42U (Qty. 2)
VRA1017 Vertical Cable Manager for 800mm Wide 48U (Qty. 2)
VRA1014 VRA1016
Hinged Covers
Snap-on hinge covers for the Vertical Cable Managers conceal cables for a
clean, professional look and easy access.
Part Number Description
VRA1018 Hinged Covers 800mm Wide 42U Vertical Cable Manager (Qty. 2)
VRA1020 Hinged Covers 800mm Wide 48U Vertical Cable Manager (Qty. 2) VRA1018
Vertical Cable Organizer
Vertical Cable Organizers provide easy cable management solutions for a single
rack. Tool-lessly attaches to the PDU/Cable management brackets providing a
vertical cable pathway. Color: black.
Part Number Description
VRA1021 Vertical Cable Organizer, 8 Cable Rings, Zero U (Qty. 2)
VRA1021
5
Vertiv™ VR Rack
Cable Trough
Power and Communications cabling on top of a row of equipment can be a
hassle. Cable Troughs are designed to organize and protect your sensitive
wiring. Color: black.
Part Number Description
VRA8581 Cable Trough, 300mm
VRA8561 Cable Trough, 600mm
VRA8571 Cable Trough, 800mm
VRA8567 Cable Trough, End Caps (Set of 2)
VRA8573 Cable Trough Cover, 300mm
VRA8574 Cable Trough Cover, 600mm
VRA8575 Cable Trough Cover, 800mm
VRA8501 Cable Trough, Cable Alignment Kit (Set of 2)
VRA8502 Cable Trough, Connector Kit (Set of 2) VRA8561 Cable Trough 600mm
VRA8503 Cable Trough, Cable Separation Kit (Set of 12)
VRA8504 Cable Trough Grounding Wire, 750mm (Set of 10)
VRA8505 Cable Trough, 300mm Height Extension
VRA8506 Cable Trough, 600mm Height Extension
Air Flow Management
Blank Panel 19” Tool Less Blanking Panel
A frequently over looked component in air flow management, blanking panels
allow you to close unused U space within the rack. Promoting proper airflow,
and minimizing bypass air. Color: black.
Part Number Description
VRA2000 1U 19" Black Plastic Tool Less Airflow Blanking Panel (Qty. 10)
VRA2001 1U 19" Black Plastic Tool Less Airflow Blanking Panel (Qty. 200)
VRA2002 19" Sheet Metal Airflow Blanking Panel Kit (1U, 2U, 4U, 8U) Black (Qty. 1 ea. Size)
VRA2003 1U 19" Sheet Metal Airflow Blanking Panel Kit Black (Qty. 2) Black VRA2002
Air Recirculation Prevention Kit
Prevent air recirculation within the rack by filling the space between the 19”
rails and side panels on 600 mm and 800 mm wide racks. Color: black.
Part Number Description
VRA2004 Air Recirculation Prevention Kit VRA2004
19" Rail Brush Strips
The 19" Rail Brush Strips prevent air recirculation within the rack by sealing the
cable pass through holes on 800 mm wide 19” rails. Color: black.
Part Number Description
VRA2005 19" Rail Brush Strips, 800mm Wide (Qty. 12) VRA2005
Cable Pass Through Brush Kit for Top Panel
The Cable Pass Through Brush Kit for Top Panels allow cabling to enter the
rack while restricting by pass air. Color: black.
Part Number Description
VRA2006 Cable Pass Through Brush Kit for Top Panel (Qty. 8) VRA2006
Shelves and Support Brackets
19" Depth Adjustable Fixed Shelf 250lbs Black
The 19" Fixed Tool-less Shelf can be used for non 19" rack mount equipment or
as additional support for 19" rack mount equipment. The shelves have an
adjustable installation depth from 27.6"(700mm) to 33.6"(854mm)D, Color: black
Part Number Description
VRA3000
VRA3000 1U Depth Adjustable Fixed shelf 250lbs Black (Qty. 1)
2U 19" Cantilever Fixed Shelf 50Lbs Black
Enables the mounting of a monitor or other equipment into the rack
environment. Color: black.
Part Number Description
VRA3001 2U 19" Cantilever Fixed Shelf 50lbs Black (Qty. 1) VRA3001
1U Depth Adjustable Sliding Shelf 200lbs Black
The 19" Telescopic Shelf utilizes high quality bearing slide rails to provide
smooth and convenient action. Depth adjustability range from 21.7"(550mm) to
33.6"(854mm)D, Color: black
Part Number Description
VRA3002 1U Depth Adjustable Sliding Shelf 100lbs Black (Qty. 1)
VRA3003 1U Depth Adjustable Sliding Shelf 200lbs Black (Qty. 1)
VRA3003
1U Depth Adjustable Equipment Support Rails 100lbs
When additional support is needed for heavy loads, our support rails provide a
suitable option. Depth Adjustable from 28.5"(724mm) to 31.6"(803mm), the rails
mount into the 19” rail side flanges and can support loads up to 100lbs (45kg).
Part Number Description
VRA3004 1U Depth Adjustable Equipment Support Rails 100lbs (Qty. 2) VRA3004
7
Vertiv™ VR Rack
Bolt Down Brackets
Bolt Down Brackets are used to secure rack to data center floor when anti-tip is
required. Brackets are included with shipment of rack. Additional brackets
canbe ordered. Color: black.
Part Number Description
VRA4000 VR Bolt Down Brackets (Qty. 2)
VRA4001 VR Anti Tip Stabilizer Plate for 600mm/800mm Wide cabinets (Qty. 2) VRA4000 VRA4001
Baying and Hardware
Baying Hardware Kits come standard with every Vertiv™ VR Rack. Additional
kits may be purchased if the original brackets have been misplaced. When
baying racks together on 24-in. centers, use a Baying Gasket Kit to seal the gap
between the racks to maintain proper are circulation.
Part Number Description
VRA5002 Baying Kit: Baying Hardware Kit (1 Kit)
VRA5003 Baying Gasket kit for use when baying racks on 24" centers
VRA5002
Mounting Hardware
One set included with each rack. Includes 50 each M6 cage nuts and plastic
cup washers with matching screws. Includes one cage nut installation/removal
tool. Additional packs of hardware can be ordered if needed.
Part Number Description
VRA5001 10-32 Cage Nuts (Qty. 50)
VRA5000 Mounting Hardware (Qty. 50 M6 cage nuts, screws, washers)
VRA5001
Zero U Accessory Mounting Bracket (Qty. 2)
Installs in various locations within the rack, providing mounting options for rack
PDUs and other small accessories.
Part Number Description
VRA5004 Zero U Accessory Mounting Bracket (Qty. 2)
VRA5004
Doors and Security
Handle Options
Interchange rack handles for various degrees of security.
Part Number Description
VRA6023 Combination Lock Handle (Qty. 2)
VRA6022 VRA6023
VRA6022 Standard Door Handle (Qty. 1)
Service Parts
19" Server Rails
Part Number Description
VRA6013 42U x 600mm Wide 19" Server Rails (Cage Nut) Black (Qty. 2)
VRA6014 42U x 800mm Wide 19" Server Rails (Cage Nut) Black (Qty. 2)
VRA6015 48U x 600mm Wide Server Rails (Cage Nut) Black (Qty. 2)
VRA6016 48U x 800mm Wide 19" Server Rails (Cage Nut) Black (Qty. 2)
VRA6013
Single Perforated Doors
Will be for the rack front as per the specs ref.(Clause. 2.1.L.9.a in
Section 27 11 16 - COMMUNICATION CABINETS, RACKS, FRAMES AND
Part Number Description
ENCLOSURE’S
VRA6001 42U x 600mm Wide Single Perforated Door Black (Qty. 1)
VRA6002 42U x 800mm Wide Single Perforated Door Black (Qty. 1)
VRA6001
VRA6003 48U x 600mm Wide Single Perforated Door Black (Qty. 1)
VRA6004 48U x 800mm Wide Single Perforated Door Black (Qty1)
Split Perforated Doors
Will be for the rack rear as per the specs ref.(Clause. 2.1.L.9.b in
Section 27 11 16 - COMMUNICATION CABINETS, RACKS, FRAMES AND
Part Number Description
ENCLOSURE’S
VRA6005 42U x 600mm Wide Split Perforated Doors Black (Qty. 2) VRA6005
VRA6006 42U x 800mm Wide Split Perforated Doors Black (Qty. 2)
VRA6007 48U x 600mm Wide Split Perforated Doors Black (Qty. 2)
VRA6008 48U x 800mm Wide Split Perforated Doors Black (Qty. 2)
9
Vertiv™ VR Rack
Split Side Panels
Part Number Description
VRA6009 42U x 1100mm Deep Split Side Panels Black (Qty. 2)
VRA6010 42U x 1200mm Deep Split Side Panels Black (Qty. 2)
VRA6011 48U x 1100mm Deep Split Side Panels Black (Qty. 2)
VRA6012 48U x 1200mm Deep Split Side Panels Black (Qty. 2)
VRA6009
PDU/Cable Management Brackets
Part Number Description
VRA6025 42U 4" Wide PDU/Cable Management Bracket Black (Qty 2)
VRA6026 48U 4" Wide PDU/Cable Management Bracket Black (Qty 2)
VRA6025
Top Panels
Part Number Description
VRA6017 600mm Wide x 1100mm Deep Top Panel Black (Qty. 1)
VRA6018 800mm Wide x 1100mm Deep Top Panel Black (Qty. 1)
VRA6019 600mm Wide x 1200mm Deep Top Panel Black (Qty. 1) VRA6017
VRA6020 800mm Wide x 1200mm Deep Top Panel Black (Qty. 1)
Miscellaneous
Part Number Description
VRA6021 Replacement Roof Grommets Black (Qty. 8)
VRA6021
VRA6024 Caster Kit (Qty. 4)
VRA6024
11
Vertiv™ VR Rack
Vertiv™ VR RACK Vertiv™ VR RACK
42U 600W 1100 D 42U 600W 1200 D
Part #: VR3100 Part #: VR3107
Vertiv™ VR RACK Vertiv™ VR RACK
42U 800W 1100 D 48U 800W 1100 D
Part #: VR3150 Part #: VR3157
Vertiv™ VR RACK Vertiv™ VR RACK
42U 600W 1200 D 48U 600W 1200 D
Part #: VR3300 Part #: VR3307
Vertiv™ VR RACK Vertiv™ VR RACK
42U 800W 1200 D 48U 800W 1200 D
Part #: VR3350 Part #: VR3357
13
Vertiv.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2020 Vertiv Group Corp. All rights reserved. Vertiv™ and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every
precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications, rebates and other promotional
offers are subject to change at Vertiv’s sole discretion upon notice.
MKA4L0UKvr-rack (R11/20)
