Xitanium
LED driver
Datasheet
Xitanium non-iso DALI dimmable & programmable
Xitanium 75W 0.12-0.4A 215V TD 230V
9290 008 52103
Xitanium non-isolated DALI drivers are ideal for High Voltage (HV) linear systems and stand on three pillars: quality of light, reliability and
flexibility.
By using Xitanium LED drivers in your luminaires, you can be sure to offer your customers high quality of light without visual flicker and
stroboscopic effects. The reliability of our drivers is based on in-depth electronics knowledge and extensive testing.
Finally, application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that
lighting specifiers and architects demand.
Benefits Features Application
• High quality of light • Configurable operating windows (AOC) • Offices
• High reliability • Adjustable Light Output (ALO) • Healthcare
• Future-proof flexibility • Constant Light Output (CLO) • Education
• Flicker and noise free dimming due to • Corridor Mode (CM) • Indoor parking areas
amplitude modulation dimming (AM) • Dimming supported during DC operation (DCemDim) • Retail: supermarkets, shopping malls
• Touch & Dim (TD) • Industry
August 2021
Electrical input data
Specification item Value Unit Condition
Rated input voltage range 220...240 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 50...60 Hz Performance range
Rated input current 0.37 A @ full output power @ rated input voltage
Rated input power 80 W @ rated output power @ rated input voltage
Power factor 0.9 @ rated output power @ rated input voltage
Total harmonic distortion 20 % @ rated output power @ rated input voltage
Efficiency 93 % @ full output power @ rated input voltage @ max. Uout
Rated input voltage DC range 186...250 Vdc Performance range
Input voltage AC range 198...264 Vac Operational range
Input frequency AC range 45...66 Hz Operational range
Input voltage DC range 168...275 Vdc Operational range
Standby Power 0.47 W
Isolation input to output No
Electrical output data
Specification item Value Unit Condition
Regulation method Constant Current
Output voltage 100...215 Vdc
Output voltage max. 275 V Maximum output voltage (rms)
Output current 0.12...0.4 A
Output current tolerance ± 5 %
Output current ripple LF ≤4 % Ripple = peak / average, < 3kHz
Output PstLM ≤ 0.12
Output SVM ≤ 0.07
Output power 21...75 W
Electrical data controls input
Specification item Value Unit Condition
Control method Corridor Mode, DALI, Touch & Dim See design-in guide at www.philips.com/oem for more
(TD) controllability details.
Dimming range 1...100 % >300mA 1% dimming; < 300mA min. current 3mA
Isolation controls input to output Basic acc. IEC61347-1
2/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
Wiring and Connections
Specification item Value Unit Type
Input wire cross-section 0.5...1.5 / 20...16 mm2 / AWG WAGO744, solid wire
Input wire strip length 8...9 mm
Output wire cross-section 0.5...1.5 / 20...16 mm2 / AWG WAGO744, solid wire
Output wire strip length 8...9 mm
Control wire cross-section 0.5...1.5 / 20...16 mm2 / AWG WAGO744, solid wire
Control wire strip length 8...9 mm
Maximum cable length 4 m Total length of wiring including LED module, one way
Insulation
Insulation per IEC61347-1 Input Output+LEDset DALI Housing
Input No Basic Basic
Output+LEDset No Basic Basic
DALI Basic Basic
Housing Basic Basic Basic
3/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
Dimensions and weight
Specification item Value Unit Tolerance (mm)
Length (A1) 360 mm
Mounting hole distance (A2) 350 mm
Width (B1) 30 mm
Height (C1) 22 mm
Mounting hole diameter (D1) 4.1 mm
Weight 248 gram
Logistical data
Specification item Value
Product name Xitanium 75W 0.12-0.4A 215V TD 230V
EOC 871829168402200
Logistic code 12NC 9290 008 52103
EAN1 (GTIN) 8718291684022
EAN3 (box) 8718291684039
Pieces per box 12
Operational temperatures and humidity
Specification item Value Unit Condition
Ambient temperature -20...+50 ºC Higher ambient temperature allowed as long as Tcase-max is not
exceeded
Tcase-max 75 ºC Maximum temperature measured at Tcase-point
Tcase-life 75 ºC Measured at Tcase-point
Maximum housing temperature 110 ºC In case of a failure, inherent by design
Relative humidity 10...90 % Non-condensing
4/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
Lifetime
Specification item Value Unit Condition
Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum
failures = 10%
Storage temperature and humidity
Specification item Value Unit Condition
Ambient temperature -25...+85 ºC
Relative humidity 5...95 % Non-condensing
Programmable features
Specification item Available Default setting Condition
Set Adjustable Output Current (AOC) Programmable, Rset2 120 mA
LED Module Temperature Protection (MTP) Yes
Adjustable Light Output (ALO) Yes OFF
Constant Light Output (CLO) Yes OFF
Touch & Dim (TD) Yes ON
Corridor Mode Yes ON Default: T1=55s, T2=12s, T3=30min
DC emergency (DCemDim) Yes ON Current output decreased to 15%
Features
Specification item Value Condition
Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I per IEC60598
Energy metering (DALI part 252) Yes
Diagnostics Yes
5/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
Inrush current
Specification item Value Unit Condition
Inrush current 22 A Input voltage 230V
Inrush peak width 275 µs Input voltage 230 V, measured at 50% height
Drivers / MCB 16A type B ≤ 24 pcs Indicative value
Please refer to the driver design in guide if you use other MCB-types.
Driver touch current / protective conductor current
Specification item Value Unit Condition
Typical Protective Conductor Current (ins. Class I) 0.4 mA rms Acc. IEC60598-1. LED module contribution not included
Surge immunity
Specification item Value Unit Condition
Mains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Application Info
Specification item Value
Approval marks BIS / CCC / CE / EL / ENEC / F-mark / RCM / TISI
Ingress Protection classification (IP) 20
Application Indoor Linear
Mounting Type Built-in
6/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
7/8 Xitanium 75W 0.12-0.4A 215V TD 230V August 2021
THD versus output power
©2021 Signify Holding, IBRS 10461, 5600 VB, NL. All rights reserved.
UK importer address: Signify Commercial UK Limited, 3, Guildford Business Park, GU2 8XG.
The information provided herein is subject to change without notice. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document
is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their
respective owners.
Date of release: August 16, 2021 v6
www.philips.com/oem
