5 6

A01 REPUBLIC OF THE PHILIPPINES

SITE DEVELOPMENT PLAN
DEPARTMENT OF PUBLIC WORKS
VICINITY MAP AND HIGHWAYS
PERSPECTIVE OFFICE OF THE BUILDING OFFICIAL
LOT PLAN

A02
GROUND FLOOR PLAN
ROOF DECK PLAN DISTRICT / CITY / MUNICIPALITY
SCHEDULE OF DOORS AND WINDOWS
RECOMMENDING APPROVAL:

A03
FRONT ELEVATION
HEAD ARCH'L. SECTION DATE
RIGHT SIDE ELEVATION
APPROVED:
REAR ELEVATION
LEFT SIDE ELEVATION
BUILDABLE AREA SECTION THRU-A BUILDING OFFICIAL DATE
SECTION THRU-B
LAND USE AND ZONING
A04
FLOOR FINISH LAYOUT

A05
WALL FINISH LAYOUT

A06
REFLECTED CEILING PLAN
CEILING DETAIL LINE AND GRADE

A07
CEILING DETAIL
SPOT DETAILS

A08
SPOT DETAILS
ARCHITECTURAL
5
N 88° 36' E 30.00 M 6
S01
GENERAL NOTES
TYPICAL DETAILS

2
2
1
3
S02
FOUNDATION PLAN
ROOF DECK FRAMING PLAN
DETAILS
4 3
STRUCTURAL
S03
FENCE FOUNDATION PLAN

31.56 M
TYPICAL DETAILS

34.08 M
E1

S 01° 22' E
LOT 11-A-1 LIGHTING LAYOUT
TOTAL LOT AREA = 972 SQM. POWER LAYOUT

N 01° 24' W
SANITARY
SCHEDULE OF LOADS AND COMPUTATION
LINE DIAGRAM
LOT 11-A-1
POINT
1-2
BEARING
S 88° 36' W
DISTANCE
20.00 M
P1 LEGEND
2-3 S 01° 24' E 2.50 M
GENERAL NOTES
3-4 S 88° 30' W 9.98 M
4 4-5 N 01° 24' W 34.08 M
1 CLEAN-OUT DETAILS ELECTRICAL
5-6 N 88° 36' E 30.00 M
6-1 S 01° 22' E 31.56 M LEGEND
TOTAL LOT AREA = 972 SQM.
SAN MIGUEL GREASE TRAP DETAILS
MUNICIPAL HALL
SANITARY LAYOUT
AD

SAN MIGUEL CHURCH

LOAY INTERIOR RO

LOT 11-C WATER LINE LAYOUT

POINT BEARING DISTANCE
1-2 N 01° 24' W 15.01 M S 88° 36' W 20.00 M 1 GENERAL NOTES
2
2-3 N 88° 36' E 20.00 M 3
2 N 88° 36' E 20.00 M
3-4 S 01° 24' E 15.01 M
ST. THERESE SCHOOL OF
JAGNA SAN MIGUEL BRANCH 4-1 S 88° 36' W 20.00 M
S 01° 24' E 2.50 M MECHANICAL
S 88° 30' W 9.98 M
THIS SITE TOTAL LOT AREA = 300 SQM.
4 3

S 01° 24' E 15.01 M

N 01° 24' W 15.01 M
SAN MIGUEL
FOOD PARK
MARIA TOWNSQUARE
TIMO SHOTS CAFE
LOT 11-C
TOTAL LOT AREA = 300 SQM.
OR ROAD

GIAN'S FOODHOUSE SAN MIGUEL

PUBLIC MARKET
LOAY INTERI

ECE

4
1 S 88° 36' W 20.00 M
 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

DRYING AREA

LAUNDRY
DIRTY KITCHEN HEAD ARCH'L. SECTION DATE

APPROVED:

ROOF DECK SLOPE

KITCHEN

DISPLAY
MASTER' BEDROOM BUILDING OFFICIAL DATE
COUNTERTOP

T&B

WORK TABLE
LEGEND
BEDROOM 03

WALK-IN-CLOSET
150MM THICK WALL
(4" CHB)
STUDY TABLE
T&B
STUDY TABLE
DINING AREA
200MM THICK WALL
BEDROOM 04
(6" CHB)
STORAGE
LIVING AREA BEDROOM 01
SUMMARY OF AREAS:
ROOF DECK SLOPE ROOF DECK SLOPE ROOF DECK SLOPE
CARPORT = ±29.0 SQM
CARPORT
SHOE RACK
STUDY TABLE
PORCH = ±14.4 SQM
LIVING AREA = ±23.46 SQM
POWDER
ROOM DINING AREA = ±14.43 SQM
KITCHEN = ±10.92 SQM
BEDROOM 02 MASTER' BEDROOM = ±16.62 SQM
MASTER' BEDROOM T&B = ±4.50 SQM
PORCH BEDROOM 01 = ±14.65 SQM
BEDROOM 02 = ±10.40 SQM
BEDROOM 03 = ±13.96 SQM
BEDROOM 03 = ±13.96 SQM
BEDROOM 03 & 04 T&B = ±4.68 SQM
POWDER ROOM = ±1.52 SQM
STORAGE = ±4.68 SQM
DIRTY KITCHEN = ±10.44 SQM
LAUNDRY = ±3.52 SQM
COMMON AREAS = ±33.86 SQM
TOTAL FLOOR AREA = ±225.00 SQM.

TOTAL LOT AREA: = ±1272.00 SQM.

 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

APPROVED:

BUILDING OFFICIAL DATE

BEDROOM 01 DIRTY
T&B
KITCHEN

CARPORT
LIVING AREA

BEDROOM 04 STORAGE STORAGE

 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

APPROVED:

BUILDING OFFICIAL DATE

LEGEND

T-600 600X600 mm CERAMIC TILES

T-300/600
PCR DRYING AREA
T-300/600 300X600 mm CERAMIC TILES

DIRTY KITCHEN LAUNDRY

PCS
TNS-600 600X600 mm NONSKID TILES

ROOF DECK SLOPE

KITCHEN
PCS
W PCW
PCW ENGINEERED
T-600 MASTER' BEDROOM W WOOD FLOORING
T&B
PCW
T-600
BEDROOM 03 SMOOTH PLAIN CEMENT
PCS

WALK-IN-CLOSET
FINISH
T&B
T-600
DINING AREA W T-300/600 ROUGH PLAIN CEMENT
PCR FINISH

T-600 PLAIN CEMENT FINISH

T-600 W/ WATER PROOFING
TNS-600 PCW PCW PCW PCW
BEDROOM 04 T-600 & APPLY SIKA LITE TOGETHER
STORAGE WITH CONCRETE POURING
BEDROOM 01
LIVING AREA
NOTE:
ROOF DECK SLOPE ROOF DECK SLOPE ROOF DECK SLOPE
T-600 TILE FINISH:
· Inspect all surfaces for defects & should be corrected
before starting work.
POWDER
· Installation of tiles.
ROOM T-300/600 · Sample of tiles, grout & other floor finishes shall be
TNS-600 submitted to the Architect for approval.
· All joints between flooring, either the same or different
CARPORT TNS-600 T-600 PCW PCW PCW types of material shall be straight & true without any
PORCH BEDROOM 02 cracks or chips.
· Upon completion, clean all tile surfaces before turn-over.

PCR
PCR
 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

APPROVED:

BUILDING OFFICIAL DATE

LEGEND

LATEX PAINT
PL (SEMI-GLOSS)

PPW PPW PPW WALL TILES

DRYING AREA WT

LAUNDRY
DIRTY KITCHEN
PLEXIBOND IN WALLGUARD
PPW PL PPW PPW FINISH AS TOP COAT

KITCHEN
PPW SS SYNTHETIC GREY STONE
PL MASTER' BEDROOM
T&B
NOTE:
BEDROOM 03 WT INTERIOR PAINTING:

WALK-IN-CLOSET
LATEX SYSTEM :
· Inspect all surface to be painted for defects &
T&B should be corrected before starting work.
PPW DINING AREA
PL · Allow at least 2 weeks curing time before any
WT application.
PL · Cleaning & washing of concrete surface before
PL PPW PPW applying any paint.
PPW PPW · Apply concrete neutralizer, use Boysen (Plain
BEDROOM 04 PL
STORAGE

Roller), leave the surface overnight to cure

BEDROOM 01
PPW · Wash surface using clean water
LIVING AREA
· Patch all temperature cracks, corner joints,
PL openings using Epoxy.
· 1 coat Boysen Acrytex Primer (Plain Roller)
· For patching use Skimcoat until wall becomes
relatively plain and smooth
PL · 1 coat Boysen Flat Latex (Plain Roller)
POWDER
ROOM WT · 2 coats Boysen Top Coat any choice of color
(Plain Roller) to be approved by Architect.
EXTERIOR PAINTING :
PPW CARPORT · Inspect all surfaces to be painted for defects &
PPW should be corrected before starting work.
BEDROOM 02
PORCH · Allow at least 2 weeks curing time before any
PL PPW application.
· Cleaning & washing of concrete surface before
PPW PPW applying any paint.
· 2 coats w/ Cement Plexi-bond (TEXTURED
SS PPW ROLLER)
PPW PPW · 1 coat Flat LATEX (Plain Roller)
· 2 coats Wallguard top coat any choice of color
(Plain Roller) to be approved by Architect.
EXTERIOR WALL WATER PROOFING: (BOYSEN)
· Inspect all surfaces to be painted for defects
& should be corrected before starting work.
· Allow at least 2 weeks curing time before any
application.
· Cleaning & washing of concrete surface before
applying any paint.
2 coats w/ Cement Plexi-bond (Plain Roller)
ACRYLIC OR PAINT: - Metal
· Inspect all surface to be painted for defects &
should be corrected before starting work.
· If corrosion and rust is visible apply rust
converter
· Apply 1 coat Boysen Epoxy Primer (Plain
Roller)
· Apply 2 coats Automotive Paint as top coat any
choice of color (Spray or Roller) to be approved
by Architect.
 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

EP H
DISTRICT / CITY / MUNICIPALITY

LAUNDRY
H RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

H H
APPROVED:

BUILDING OFFICIAL DATE

H
LEGEND (FINISHES)
H H
H
4.5 mm THK. HARDIEFLEX /
H H FIBER CEMENT BOARD

H EXPOSED WITH PAINT

EP
H
H
LEGEND (LIGHTING FIXTURES)

CIRCULAR LED PINLIGHT (RECESSED TYPE)

9 WATTS
H
DROP LIGHT
H

H LINEAR RECESSED LIGHT (LED)

H H
ROPE LIGHT (LED)

CHANDELIER

SQUARE LIGHT

T8 LED TUBE 18W

WL WALL LAMP 8W

GL GARDEN LIGHT

CEILING VENT

NOTE:
FIBER CEMENT BOARD
· Use4.5 mm thk. Fiber Cement board for
ceiling w/ metal framing 600 X 600 space
B.W.O.C
· Use Epoxy w/ joint mesh as joint sealer.
· 1 coat Boysen Acrytex Primer (Plain Roller)
· Use Skimcoat until wall becomes relatively
plain and smooth
· 2 coats Flat Latex as final paint applied
using roller.
EXPOSED W/ PAINT CONCRETE
· Exposed concrete areas w/ paint apply
Boysen concrete neutralizer, (Plain Roller),
leave the surface overnight to cure.Wash
surface using clean water.Patch all
temperature cracks, corner joints using
Epoxy.1 coat Boysen Acrytex Primer (Plain
Roller).1 coat Boysen Flat Latex (Plain
Roller).2 coats Boysen Top Coat any choice
of color (Plain Roller) to be approved by
Architect.
 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

PORCH DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

APPROVED:

BUILDING OFFICIAL DATE

LEGEND (FINISHES)

4.5 mm THK. HARDIEFLEX /

H FIBER CEMENT BOARD

EP EXPOSED WITH PAINT

LEGEND (LIGHTING FIXTURES)

CIRCULAR LED PINLIGHT (RECESSED TYPE)

9 WATTS

DROP LIGHT

LINEAR RECESSED LIGHT (LED)

ROPE LIGHT (LED)

CHANDELIER

SQUARE LIGHT

T8 LED TUBE 18W

WL WALL LAMP 8W

GL GARDEN LIGHT

CEILING VENT

NOTE:
FIBER CEMENT BOARD
· Use4.5 mm thk. Fiber Cement board for
ceiling w/ metal framing 600 X 600 space
B.W.O.C
· Use Epoxy w/ joint mesh as joint sealer.
· 1 coat Boysen Acrytex Primer (Plain Roller)
· Use Skimcoat until wall becomes relatively
plain and smooth
· 2 coats Flat Latex as final paint applied
using roller.
EXPOSED W/ PAINT CONCRETE
· Exposed concrete areas w/ paint apply
Boysen concrete neutralizer, (Plain Roller),
leave the surface overnight to cure.Wash
surface using clean water.Patch all
temperature cracks, corner joints using
Epoxy.1 coat Boysen Acrytex Primer (Plain
Roller).1 coat Boysen Flat Latex (Plain
Roller).2 coats Boysen Top Coat any choice
of color (Plain Roller) to be approved by
Architect.
 REPUBLIC OF THE PHILIPPINES
DEPARTMENT OF PUBLIC WORKS
AND HIGHWAYS
OFFICE OF THE BUILDING OFFICIAL

DISTRICT / CITY / MUNICIPALITY

RECOMMENDING APPROVAL:

HEAD ARCH'L. SECTION DATE

APPROVED:

BUILDING OFFICIAL DATE