Scribd
Upload
18 views

ZL 3865

Uploaded by

cotin006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

ZL 3865

Uploaded by

cotin006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9116/10

Gantrail Welded Base Fixing


www.mingrail.com

9116/10
The GANTRAIL 9116/10 SPECIFICATIONS:
adjustable crane rail clip
is designed to fix light MAX SIDE LOAD 40kN
rails in the most arduous 10mm HORIZONTAL RAIL ADJUSTMENT
applications. It can
withstand a horizontal DIMENSIONS (mm):
force from the rail of
40kN (4.1 tonnes). Its low REF No. X Y Z WEIGHT
profile allows it to be used kg
with cranes that are fitted 9116/10/25 25 41 24 0.67
with guide rollers. 9116/10/32 32 41 24 0.69

15152258117

FEATURES 1 RAIL WITH PAD 2 RAIL WITHOUT PAD

• The proven design has been


used successfully for many
5 5
years throughout the world.
• The clip is welded to the rail
support. No access is required
from below.
• The two main parts are locked 8
together on tightening the
grade 8.8 bolt.
• The clip has a self-tightening
mechanism. M16
X
• A special vulcanised rubber
block applies a controlled
force to the rail.
Y

COMPONENTS
V
1 W

45 75
2

3
55
71

1. Flange nut
2. Clip cap with integral
rubber block
3. M16 Captive bolt
Minimum assembly width - W = Rail width (F) + 118mm V = Rail width (F) + 16mm
4. Weldable base

9116/10/DO/04/21
9116/10
Gantrail Welded Base Fixing

A
F C A 1. CLIP REFERENCE 2. CLIP REFERENCE
F mm mm mm FOR RAIL WITH PAD FOR RAIL WITHOUT PAD
A 45 125 45 55 9116/10/32 9116/10/25
A 55 150 55 65 9116/10/32 9116/10/25
A 65 175 65 75 9116/10/32 9116/10/25
A 75 200 75 85 9116/10/32 9116/10/25
S 20 82 44 100 9116/10/32 9116/10/25
S 30 108 60 108 9116/10/32 9116/10/25
S 33 105 58 134 9116/10/32 9116/10/25
S 41 125 67 138 9116/10/32 9116/10/25
ISCR 80 130 82 130 9116/10/32 9116/10/25
QU 70 120 70 120 9116/10/32 9116/10/25
QU 80 130 80 130 9116/10/32 9116/10/25
ISCOR 30 110 57 110 9116/10/32 9116/10/25
ISCOR 40 127 64 127 9116/10/32 9116/10/25
JIS 37 122 63 122 9116/10/32 9116/10/25
JIS 40N 122 64 140 9116/10/32 9116/10/25
22 kg BHP 94 51 94 9116/10/32 9116/10/25
31 kg AS 108 64 118 9116/10/32 9116/10/25
41 kg AS 127 64 137 9116/10/32 9116/10/25
UIC 54 140 70 159 9116/10/32 9116/10/25

This clip can be used for a wider selection of rails than illustrated.
Please contact GANTRAIL for the full range of possible rails. All rails can be fastened with bolted or welded base clips.
GANTRAIL may change or improve their products and also alter specifications without notice.

INSTALLATION INSTRUCTIONS: WELD DETAIL


Weld all round the clip base, except the side closest and parallel to the rail,
RAIL SEE INSTALLATION
with a 3mm throat thickness fillet weld, using low hydrogen electrodes. EDGE INSTRUCTIONS FOR
Recommended electrodes AWS E7018 or E7028. Clip base is made from INFORMATION ON WELDING
weldable grade steel. FRONT EDGE
8

If a continuous weld around the base is required, this is possible. a3


Please consult GANTRAIL for guidance. (3mm THROAT THICKNESS)

TIGHTENING TORQUE 125Nm


9116/10 CLIP BASE
Please contact GANTRAIL, for full installation instructions.

A world of crane rail expertise.


www.mingrail.com

Gantry Railing Ltd


Sudmeadow Road
GANTRAIL Hempsted
32 Gloucester GL2 5HG ISO 9001
Registered
[email protected] ENGLAND Quality
Management
15152258117 015

Certificate No. 5180


0510-66728110 Tel: +44 (0) 1452 300688
WWW.MRAIL.CN E-mail: [email protected]
9116/10/DO/04/21

You might also like