Bostik S300 SILICONE MULTI PURPOSE
Low modulus acetoxy silicone sealant for sanitary applications
Additional information
100 % modulus DIN 53504 S2 0,28 N/mm²
Application rate 6.3 bar/3mm 900 g/min
Application temperature +5°C till +40°C
Base Silicone
@ +23°C/50%
Curing time 2 mm/24 hours
RH
Density ISO 1183-1 0,97 g/ml
Elongation at break DIN 53504 S2 410%
Frost resistance during
till -15°C
transportation
Shorea hardness DIN 53505 11
Product Description
10-12 minutes
BOSTIK S300 SILICONE MULTI PURPOSE is a versatile acetoxy Skin formation DBTM 16
@ +23°C/50%
silicone sealant for sanitary and kitchen applications which cures by
reacting to moisture to form a durable elastic rubberseal. The product -40°C till
Temperature resistance
is UV and weather resistant. +120°C
Tensile strength DIN 53504 S2 0,75 N/mm²
Benefits
• Perfect adhesion to glass, painted wood, ceramic and enamelled Viscosity 75
substrates These are typical values
• Colourfast
Limitations
• Mould resistant
• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics,
neoprene and bituminous substrates
Applications
• Not suitable for applications on concrete, marble, lead, copper
BOSTIK S300 SILICONE MULTI PURPOSE was specifically
and galvanized steel
developed for top sealing in kitchens and bathrooms.
Directions Of Use Surface Preparations and Finishing
A joint with the correct dimensions is able to absorb movements Application temperature: + 5°C to + 40°C (applies to environment and
between building materials. The joint depth should always be in the substrates). All substrates must be solid,clean, dry, and free of
correct relationship of the joint width. A general rule is the ratio of grease and dust. Clean substrates with BOSTIK Cleaner. BOSTIK
joint depth to the width of the joint with a joint width up to 10mm is 1:1, S300 SILICONE MULTI PURPOSE adheres perfectly without the
with a minimum of 5mm in width and depth. For joints wider than use of a primer to most non porous substrates, like glass, painted
10mm, the depth is the width divided by 3 plus 6mm. wood, ceramic and enamelled. Always test adhesion prior to
application. Use BOSTIK Finisher to smooth the joint
Bostik Benelux B.V
Denariusstraat 11, 4903 RC Oosterhout, The Netherlands 22-10-2024
Phone: +31 (0)162491000, E-mail:
[email protected] 21:39:42
www.bostik.com | www.denbraven.com CEST
Bostik S300 SILICONE MULTI PURPOSE
Low modulus acetoxy silicone sealant for sanitary applications
Paintability Health & Safety
BOSTIK S300 SILICONE MULTI PURPOSE is not paintable. We Product Safety Data Sheet must be read and understood before use.
recommend covering the edges of the joint with masking tape to These are available on request and via our websites
prevent surfaces that need to be painted from being contaminated by
silicone. Warranty & Guarantee
Bostik warrants that its product complies, within its shelf life, to its
Cleaning specification.
Tools should be cleaned after use with water. Hands can be cleaned
Disclaimer
with BOSTIK Wipes and/or water and soap. Cured material can only
All information in this document and in all our other publications (including electronic ones) is based on our current
be mechanically removed. knowledge and experience and is the exclusive (intellectual) property of Bostik. No part of this document may be
copied, shown to third parties, reproduced, communicated to the public or used in any other way without Bostik
written consent. The technical information in this document serves as an indication and is non-exhaustive. Bostik is
Colour(s) not liable for any damage, either directly or indirectly, due to (editorial) errors, incompleteness and/or incorrectness
of this document. This includes, but is not limited to, incompleteness and/or incorrectness due to technological
• White changes or any research conducted between the date of publication of this document and the date on which
the product is acquired. Bostik reserves the right to amend the wording of this document. Bostik cannot be held
liable for any damage, either directly or indirectly, due to the use of the product(s) depicted in this document. The
• Transparent user must read and understand the information in this document and other documents relating to the products
prior to the use of the product. The user is responsible for performing all the requisite tests to make sure that the
• Black product is suitable for its intended use. We have no influence in what way the product is applied and/or any
circumstances relating to events occurring during storage or transport and therefore we do not accept any liability
for damage whatsoever. All deliveries are made exclusively in accordance with our general terms of conditions
• Concrete Grey which have been filed at the Dutch Chamber of Commerce.
Packaging
• Cartridge
For product specifications, please refer to the Product Detail Page
Shelf Life
In unopened original packaging between +5°C and +25°C, shelf life
up to 18 months from production date, stored in a dry place.
Certifications
EN 15651-3: S S1
EN 15651-1: F-EXT-INT-CC
A+ French VOC Regulation
EN 15651-2: G-CC
Bostik Benelux B.V
Denariusstraat 11, 4903 RC Oosterhout, The Netherlands 22-10-2024
Phone: +31 (0)162491000, E-mail:
[email protected] 21:39:42
www.bostik.com | www.denbraven.com CEST
