10/25/24, 1:38 PM SIS 2.
2007/06/11 Fuel Tank - Remove (KENR6018-15)
SMCS - 1273 i02766798
Removal Procedure
PIP
Start By:
-
202 1098
- Remove". 4
05: 10/2 809
/ 0
a. Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure (Hood)
3
KE 8:38+ 5
b. Remove the secondary steering motor. Refer to Disassembly and Assembly, "Secondary
Steering Pump and Motor - Remove and Install".
N
© 2 R60 08:00
NOTICE
024 18
Cat
Keep all parts clean from contaminants.
erp
Contaminants may cause rapid wear and shortened component
life.
illa
rI nc.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and
repair of the product. Be prepared to collect the fluid with
suitable containers before opening any compartment or
disassembling any component containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain
fluids on Cat® products.
Dispose of all fluids according to local regulations and
mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation
purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep
contaminants from entering the system.
1. Connect the steering frame lock. Refer to Operation and Maintenance Manual, "Steering
Frame Lock".
https://sis2.cat.com/#/print-preview/service/a478a93c-72f7-40ac-8905-1f984ceb7fe9 1/4
10/25/24, 1:38 PM SIS 2.0
2. Drain the fuel tank into a suitable container for storage or disposal. Refer to Operation and
Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Illustration 1 g01384401
3. Remove hose (1). Disconnect hose assembly (2).
Illustration 2 g01384405
4. Disconnect hose assembly (3). Disconnect hose (4).
https://sis2.cat.com/#/print-preview/service/a478a93c-72f7-40ac-8905-1f984ceb7fe9 2/4
10/25/24, 1:38 PM SIS 2.0
Illustration 3 g01384453
5. Attach a suitable lifting device onto fuel tank (5). The weight of fuel tank (5) is approximately
231 kg (510 lb).
Illustration 4 g01384412
Illustration 5 g01386121
6. Disconnect hose assembly (6).
7. Remove bolts (7). Repeat this step for the opposite side.
https://sis2.cat.com/#/print-preview/service/a478a93c-72f7-40ac-8905-1f984ceb7fe9 3/4
10/25/24, 1:38 PM SIS 2.0
Illustration 6 g01384453
8. Remove fuel tank (5).
PIP-10980809
2024/10/25
05:38:35+08:00
i02766798
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/a478a93c-72f7-40ac-8905-1f984ceb7fe9 4/4
