Phoenix Contact 2816399 en
Phoenix Contact 2816399 en
2816399
https://www.phoenixcontact.com/in/products/2816399
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal
monitoring, visual fault warning. Design: 400 V AC
Your advantages
• Quality proven millions of times over in the widest range of applications
• Rapid installation with bridges, thanks to industry-standard overall width of 1 HP
• Easy testing and insulation measurement, thanks to pluggable protection modules
• Wide range of applications due to various nominal voltages
• High degree of modularity provides individual solutions for every application
Commercial data
Item number 2816399
Packing unit 10 pc
Minimum order quantity 1 pc
Sales key CL1
Product key CL1321
Catalog page Page 69 (C-4-2019)
GTIN 4017918131593
Weight per piece (including packing) 55.106 g
Weight per piece (excluding packing) 51 g
Customs tariff number 85363010
Country of origin IN
Technical data
Notes
General Use in DC applications on request
General
Note Usable in all low-voltage systems between L-N or L-PEN.
Only usable in IT Systems between L-PE, if the exposed-
conductive-parts (bodies) of the equipment of the low-voltage
installation is connected to the earthing arrangement of the
transformer substation. (interconnected earthing arrangement of
the HV-transformer substation with the bodies of the LV-
installation. RE = RA accordance to IEC 60364-4-442 / VDE
0100-442 Fig. 44D / Example a)
Product properties
IEC test classification II
T2
EN type T2
IEC power supply system TN
TT
IT
Type DIN rail module, two-section, divisible
Product type Replacement plug
Product family VALVETRAB MS
Number of positions 1
Surge protection fault message optical
Arrester can be tested with CHECKMASTER from software From SW rev. 1.10
version:
Insulation characteristics
Overvoltage category III
Pollution degree 2
Electrical properties
Nominal frequency fN 50 Hz (60 Hz)
Connection data
Connection method pluggable
Dimensions
Dimensional drawing
Width 17.5 mm
Height 52.4 mm
Depth 55.3 mm
Horizontal pitch 1 Div.
Material specifications
Color black (RAL 9005)
Copper
Flammability rating according to UL 94 V-0
CTI value of material 600
Insulating material PA 6.6
Material group I
Housing material PA 6.6
Protective circuit
Mode of protection L-N
L-PE
L-PEN
Direction of action 1L-N/PE
Nominal voltage UN 240/415 V AC (TN)
240/415 V AC (TT)
230 V AC (IT)
Nominal frequency fN 50 Hz (60 Hz)
Maximum continuous voltage UC 440 V AC
Residual current IPE ≤ 0.45 mA
Standby power consumption PC ≤ 200 mVA
Nominal discharge current In (8/20) µs 20 kA
Maximum discharge current Imax (8/20) µs 40 kA
Short-circuit current rating ISCCR 25 kA
Voltage protection level Up ≤ 2.2 kV
Residual voltage Ures ≤ 2.2 kV (at In)
≤ 1.8 kV (at 10 kA)
≤ 1.5 kV (at 5 kA)
≤ 1.4 kV (at 3 kA)
TOV behavior at UT 440 V AC (5 s / withstand mode)
440 V AC (120 min / withstand mode)
Response time tA ≤ 25 ns
Max. backup fuse with branch wiring 125 A (gG)
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Approvals
UL specifications
Maximum continuous operating voltage MCOV (L-N) 440 V AC
Nominal discharge current In (L-N) 20 kA
Mode of protection L-N
Nominal voltage 400 V AC
Power distribution system Single phase
Nominal frequency 50/60 Hz
Measured limiting voltage MLV (L-N) 2280 V
SPD Type 4CA
Mounting
Mounting type on base element
Drawings
Dimensional drawing
52,4
44,8 17,5
43,3
55,3
Circuit diagram
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/in/products/2816399
cUL Recognized
Approval ID: FILE E 330181
UL Recognized
Approval ID: FILE E 330181
IECEE CB Scheme
Approval ID: AT 2905/M1
EAC
Approval ID: EAC-Zulassung
CCA
Approval ID: NTR-AT 1947-A
KEMA-KEUR
Approval ID: 71-113273 REV.1
DNV GL
Approval ID: TAE000041M
EAC
Approval ID: RU C-DE.*09.B.00169
CSA
Approval ID: 13631
ÖVE
Approval ID: 18583-001-17
UAE-RoHS
Approval ID: 22-09-51251
cULus Recognized
Classifications
ECLASS
ECLASS-11.0 27130890
ECLASS-13.0 27171292
ETIM
ETIM 9.0 EC002496
UNSPSC
UNSPSC 21.0 39121600
Accessories
2830443
https://www.phoenixcontact.com/in/products/2830443
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 10 pitches
with contact sequence 1-0-0
2809283
https://www.phoenixcontact.com/in/products/2809283
Wiring bridge for modules with connecting pitch 17.5 mm, 4-phase, 8-pos.
2809241
https://www.phoenixcontact.com/in/products/2809241
Wiring bridge for modules with connecting pitch 17.5 mm, 3-phase, 6-pos.
2809238
https://www.phoenixcontact.com/in/products/2809238
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 57-pos.
2748593
https://www.phoenixcontact.com/in/products/2748593
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 12-pos.
2748580
https://www.phoenixcontact.com/in/products/2748580
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 9-pos.
2748577
https://www.phoenixcontact.com/in/products/2748577
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 8-pos.
2748564
https://www.phoenixcontact.com/in/products/2748564
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 6-pos.
2809225
https://www.phoenixcontact.com/in/products/2809225
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 4-pos.
2809212
https://www.phoenixcontact.com/in/products/2809212
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 3-pos.
2809209
https://www.phoenixcontact.com/in/products/2809209
Wiring bridge for modules with connecting pitch 17.5 mm, 1-phase, 2-pos.
2749589
https://www.phoenixcontact.com/in/products/2749589
Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol,
mounting type: snapped, for terminal block width: 18 mm, lettering field size:
18 x 5 mm, Number of individual labels: 5
2749576
https://www.phoenixcontact.com/in/products/2749576
Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND,
mounting type: snapped, for terminal block width: 18 mm, lettering field size:
18 x 5 mm, Number of individual labels: 5
2809128
https://www.phoenixcontact.com/in/products/2809128
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-
PLOTTER, PLOTMARK, mounting type: snapped, for terminal block width: 18
mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
0825059
https://www.phoenixcontact.com/in/products/0825059
Zack marker strip, can be ordered: Strip, white, labeled according to customer
specifications, mounting type: snap into tall marker groove, for terminal block
width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5
2817741
https://www.phoenixcontact.com/in/products/2817741
2817738
https://www.phoenixcontact.com/in/products/2817738
1051993
https://www.phoenixcontact.com/in/products/1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and
waterproof, line thickness 0.5 mm
+91.1275.71420
[email protected]