Call transfer Programmable keys

V1 0
Attended transfer: 1. You can configure shortcuts for the programmable keys.
1. Press key or Xfer soft key during the active conversation, 2. Press Menu > Basic > Keyboard, select among the
the call is put on hold. configurable items, and select your desired type and value,
2. Dial the second telephone number. press OK key.
3. When the call is answered, then press key or Xfer soft
key to complete the operation.
Redial
Blind transfer:
1. Press key or Xfer soft key during the active conversation, 1. Press redial a call number.
the call will be on hold.
2. Then enter the 2nd telephone number and press key
or Xfer soft key.
Do not disturb
1. Press DND soft key, and enable the device do not disturb
mode.
Call forward 2. Or press Menu > Features > DND, and select the Mode and
Type, and press OK soft key.
1. Press Menu > Features > Call Forward.
2. Select the line, the type of forward, enter the destination
number and status and OK. Voice mail
1. To access your voice mailbox, press or Menu
Call Mute > Message > Voice Message, number of messages will be
indicated if provided by your server or pbx.
2. Select the line and press Play to call.
1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.
Bluetooth
Call list 1. Press Menu > Basic > Bluetooth.
2. Press OK soft key to enter the bluetooth open interface.
1. Press key or Menu > CallLog > Local Call Logs. After opening, press Scan soft key to display the list of
2. Scroll through the list using . bluetooth scanned. Select any device and press connect.
3. To dial an entry, press Dial soft key or pickup handset or
press or .
Wi-Fi
1. Plug the Wi-Fi Dongle. Press Menu > Basic > WLAN.
Phonebook 2. Press OK soft key to enter the WLAN open interface.
After opening, press Scan soft key to display the list of Wi-Fi
Access phonebook: scanned.

X6U
1. Press or Contact soft key or Menu > PhoneBook 3. Press Enter soft key to enter the available Network, select
> Local Contacts. the wireless network, press the Connect soft key and enter
2. Select All Contacts or other group. the password to connect.
3. To dial an entry, press Dial soft key or pickup handset or
press or .

Quick Installation Guide

Add new entry:
1. Press Contact soft key, Press All Contacts or other group
> Press Add.
2. Enter name and number and press OK soft key.

Fanvil Technology Co., Ltd

Website: www.fanvil.com
EMail: [email protected] [email protected] Fanvil Technology Co., Ltd
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 www.fanvil.com
Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II), 67th District, Bao'An, Shenzhen, China

P/N:CJBA100054A0
-4-
Packaging list Installation the device Configuration

Please follow the instructions in below picture to install the Configuration via Phone
device. 1. Press Menu > Advanced (Default password 123)
Bracket desktop installation 2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE)
3. Select Accounts: To configure enable the account, fill the
SIP server address, port, user name, password etc.

Configuration via Web

Handset Cord Ethernet Cord Quick Installation Guide
1. Get the IP address from the phone: Press key, or Menu
> Status > IPv4 / IPv6.
2. Loogin: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment(The default
username and password are both ‘admin’.)
3. Configure: Select network/Account etc, and fill the relevant
Wall mounting (Wall Stand need buy separately)
IP Phone Handset Stand Power Adapter Wall Stand content.
(Optional) (Buy separately) 4. Save the configuration.

Screen icon
Language setting
In hands-free mode Call Forward activated SMS
New SMS Dialed call(s)
Disable do not 1. Press Menu key > Basic > Language.
In headset mode disturb (Blue) New VM Messages Internet connected
2. Select the desired language and press OK soft key.
Do not disturb Voice Quality
In handset mode activated (Red) Internet is disconnected
Level of call
X

Mute activated SIP Hotspot activated Keypad locked No IP address Making a call
Ringer off VLAN activated Wireless network
Forward call(s)
connected 1. Pre-dialing: enter the phone number and pick up the handset.
Call is on hold VPN activated Wireless network
Missed call(s) 2. Direct dialing: lift the handset and enter the phone number.
disconnected
Auto-answering Bluetooth device 3. Handsfree: enter phone number and press or vice versa.
Received call(s) Wireless network failure
activated paired connection
4. Headset: enter phone number and press or vice versa.
Connecting to the Device 5. Designated line: press line key, enter phone number and
Keys features Please connect power adapter, network, PC, handset, and press dial key.
headset to the corresponding ports as described in below
picture.
Call transfer key Headset key, Activate/deactivate ① USB port: connect USB device (USB flash disk, WIFI Dongle)
Accepting a call
Headset ② Power port: connect the power adapter.
③ Network port: connecting local area network or Internet. 1. With the handset: pick up the handset.
Conference key ④ PC port: the network port connect to the computer. 2. With a headset: press .
Redial key, Access to redial the last
record ⑤ Headset port: connect headset. 3. With the handsfree: press .
⑥ Handset port: connect IP Phone handset.
Line keys
In idle mode: ringer off
In communication mode: mute/
Putting a call on hold
Soft keys un-mute a call
1. Press key or Hold soft key, caller is put on hold.
2. To retrieve the call press key or Resume soft key.
In idle mode or during ringing: Note: with more than one active call, select desired call with
Message waiting indicator
DSS Keys, It can be set as line key
increase or decrease ringer volume the navigator keys and use the corresponding soft key to
hold or resume.
/function key/speed dial key, etc. In communication: increase or
decrease
Page-Jump key, It can switch the earpiece, headset or hands-free
Left and right navigation keys
vice screen DSS pages volume 3-party conference
Up navigation key, Shortcut to
call log Phonebook key 1. Once in line with 1st caller, press key or Conf soft key,
Down navigation key, Shortcut to Hands-free key, Activate/deactivate 1st caller is put on hold.
Status Call logs key
hands free 2. Then call the 2nd number.
OK key, Shortcut to Menu 3. After, 2nd call is established, press key or Conf soft key to
Voice messages key set up the conference.
Long press to lock keypad.
Hold key, Hold/Resume the call Enter PIN to unlock keypad
-2- -3-