QuickSpecs HPE Networking Comware Switch Series 5140 EI

Overview

HPE Networking Comware Switch Series 5140 EI

The HPE Networking Comware Switch Series 5140 EI comprises Gigabit Ethernet switches that support static, OSPF and RIP Layer
3 routing, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.

Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device,
which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide
Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers.

High availability, simplified management, and comprehensive security control policies are among the key features that distinguish
this series.

HPE Networking Comware 5140 48G PoE+ 4SFP+ EI Switch (JL824A)

HPE Networking Comware 5140 24G PoE+ 4SFP+ EI Switch (JL827A)

Page 1
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Overview

HPE Networking Comware 5140 24G 4SFP+ EI Switch (JL828A)

HPE Networking Comware 5140 48G 4SFP+ EI Switch (JL829A)

HPE Networking Comware 5140 24G POE+2SFP+2XGT EI Switch (JL823A)

Page 2
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Overview

HPE Networking Comware 5140 48G PoE+ 4SFP+ EI Switch (JL824A)

HPE Networking Comware 5140 24G 2SFP+ 2XGT EI Switch (R8J41A)

HPE Networking Comware 5140 8G 2SFP 2GT Combo EI Switch (R8J42A)

Page 3
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Overview

Models
HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 JL826A
HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A
HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A

Key features
• Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10GbE uplinks and POE+ models for voice,
video and wireless
• IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices
• Embedded network management capabilities at no additional cost with Smart Management Centre (SmartMC)
• Energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down
unused ports

Page 4
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Standard Features

Software-defined networking
• OpenFlow
Supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths

Quality of Service (QoS)

• Broadcast control
Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
• Advanced classifier-based QoS
Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting
priority level and rate limit to selected traffic on a port, VLAN, or whole switch
• Powerful QoS feature
Supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR
• Traffic policing
Supports Committed Access Rate (CAR) and line rate

Connectivity
• Auto-MDIX
Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
• Flow control
Provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
• High-density connectivity
Provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch
• IEEE 802.3at Power over Ethernet (PoE+) support
Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in
supplying local power at each access point location
• Ethernet operations, administration and maintenance (OAM)
Detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the
status of the link between two devices

Resiliency and high availability

• Separate data and control paths
Separate control from services and keeps service processing isolated; increases security and performance
• External redundant power supply
Provides high reliability
• Smart link
Allows 100 ms failover between links
• Spanning Tree/MSTP, RSTP, PVST+, RPVST+
Link redundancy with support for protocols such as Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree
Protocol (RSTP), Per-VLAN Spanning Tree (PVST+), Rapid Per-VLAN Spanning Tree (RPVST+), and Smart Link provides
high availability
• Intelligent Resilient Fabric (IRF)
Creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router;
switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached
using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like
Spanning Tree Protocol, (), or VRRP, thereby simplifying network operation

Page 5
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Standard Features

Layer 3 routing
• Static IP routing
Provides manually configured routing for both IPv4 and IPv6 networks
• Open Shortest Path First (OSPF)
An Interior Gateway Protocol (IGP) that uses a link state routing algorithm; supports OSPFv1/v2 and OSPFv3
• Routing Information Protocol (RIP)
Uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes
loop protection

Management
• Remote configuration and management
Enables configuration and management through a secure Web browser or a CLI located on a remote device
• Manager and operator privilege levels
Provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
• Command authorization
Leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides
an audit trail
• Secure Web GUI
Provides a secure, easy-to-use graphical interface for configuring
the module via HTTPS
• Multiple configuration files
Stores easily to the flash image
• Complete session logging
Provides detailed information for problem identification and resolution
• Remote monitoring (RMON)
Uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a
private alarm extension group
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network management applications
• sFlow (RFC 3176)
Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this
allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and
real-time network monitoring purposes
• Management VLAN
Segments traffic to and from management interfaces, includingCLI/telnet, a Web browser interface, and SNMP
• Remote intelligent mirroring
Mirrors ingress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
• Device Link Detection Protocol (DLDP)
Monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which
prevents network problems such as loops
• IPv6 management
Provides future-proof networking because the switch is capable of being managed whether the attached network is
running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and
RADIUS for IPv6
• Troubleshooting
Ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable
problems
• Smart Management Center (SmartMC)
Embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management.
It is made available at no additional cost and offers centralized configuration backup, software version management and
seamless switch replacement.

Page 6
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Standard Features

• HPE Intelligent Management Center (IMC)

Integrates fault management, element configuration, and network monitoring from a central vantage point; built-in
support for third-party devices enables network administrators to centrally manage all network elements with a variety of
automated tasks, including discovery, categorization, baseline configurations, and software images; the software also
provides configuration comparison tools, version tracking, change alerts, and more
• Network Management
SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management
tool with secure access

Security
• Access control lists (ACLs)
Provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
• IEEE 802.1X
Industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a
RADIUS server
• MAC-based authentication
Client is authenticated with the RADIUS server based on the client's MAC address
• Identity-driven security and access control
− Per-user ACLs
Permits or denies user access to specific network resources based on user identity and time of day, allowing
multiple types of users on the same network to access specific network services without risking network security
or providing unauthorized access to sensitive data
− Automatic VLAN assignment
Automatically assigns users to the appropriate VLAN based on their identities
• Secure management access
Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, HTTPS and/or SNMPv3
• Secure FTP/ SCP
Allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a
switch configuration file
• Guest VLAN
Provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
• Port security
Allows access only to specified MAC addresses, which can be learned or specified by the administrator
• Port isolation
Secures and adds privacy, and prevents malicious attackers from obtaining user information
• STP BPDU port protection
Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• STP root guard
Protects the root bridge from malicious attacks or configuration mistakes
• DHCP protection
Blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• IP source guard
Helps prevent IP spoofing attacks
• Dynamic ARP protection
Blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• RADIUS/HWTACACS
Eases switch management security administration by using a password authentication server

Page 7
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Standard Features

Performance
• Nonblocking architecture
Up to 176 Gb/s nonblocking switching fabric provides wirespeed switching with up to 130.9 Mpps throughput
• Hardware-based wirespeed access control lists (ACLs)
Help provide high levels of security and ease of administration without impacting network performance with a feature-rich
TCAM-based ACL implementation

Device support
• Prestandard PoE Support
Detects and provides power to prestandard PoE devices such as wireless LAN access points and IP phones

Convergence
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Facilitates easy mapping using network management applications with LLDP automated device discovery protocol
• LLDP-MED
Is a standard extension that automatically configures network devices, including LLDP-capable IP phones
• LLDP-CDP compatibility
Receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
• IEEE 802.3at Power over Ethernet (PoE+)
Provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments
• PoE allocations
Supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
• Voice VLAN
Automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
• IP multicast snooping (data-driven IGMP)
Prevents flooding of IP multicast traffic

Additional information
• Green IT and power
Improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes variable-speed fans, reducing energy costs
• Green initiative support
Provides support for RoHS and WEEE regulations
• Unified Hewlett Packard Enterprise Comware operating system with modular architecture
Provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing,
and security platforms leverage the Comware OS, a common unified modular operating system

Energy Efficient Ethernet (EEE) Support

Reduces power consumption in accordance with IEEE 802.3az

Layer 2 switching
• 16K MAC address table
Provides access to many Layer 2 devices
• VLAN support and tagging
Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
• IEEE 802.1ad QinQ and selective QinQ
Increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-
speed campus or metro network

Page 8
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Standard Features

• 10GbE port aggregation

Allows grouping of ports to increase overall data throughput to a remote device
• Device Link Detection Protocol (DLDP)
Monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-
based networks
• Jumbo Frame Support
Improves the performance of large data transfers; supports frame size of up to 9K-bytes

Layer 3 services
• Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows
detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are
separated by a Layer 2 network
• Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
• Loopback interface address
Defines an address that can always be reachable, improving diagnostic capability
• User Datagram Protocol (UDP) helper function
Allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and
prevents server spoofing for UDP services such as DHCP
• Route maps
Provide more control during route redistribution; allow filtering and altering of route metrics
• DHCP server
Centralizes and reduces the cost of IPv4 address management

Warranty and support

• Limited Lifetime Warranty
See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your
product purchase.
• Software releases
To find software for your product, refer to http://www.hpe.com/networking/support; for details on the software
releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Page 9
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

BTO Models
Switch Chassis
Rule # Description SKU
2, 3, 4 HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
• 24 POE RJ-45 autosensing 10/100/1000 ports
• 2 SFP Ports, 2 XGT Ports
• min=0 \ max=2 SFP Transceivers
• Power supply included
• 1U - Height
HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 24G POE+2SFP+2XGT EI 5140 JL823A
• No Localized Power Cord Selected
2, 3, 4 HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
• 48 RJ-45 autosensing 10/100/1000BASE-T ports
• 4 SFP+ ports
• min=0 \ max=4 SFP+ Transceivers
• Power supply included
• 1U - Height
HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 48G PoE+ 4SFP+ EI 5140 JL824A
• No Localized Power Cord Selected
2, 3, 4 HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
• 48 POE RJ-45 autosensing 10/100/1000 ports
• 2 SFP+ Ports, 2 XGT Ports
• min=0 \ max=2 SFP+ Transceivers
• Power supply included
• 1U - Height
HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 48G POE+ 2SFP+ 2XGT EI 5140 JL825A
• No Localized Power Cord Selected

Page 10
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

1, 2 HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 JL826A
• 24 SFP ports
(Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)
min=0 \ max=24 SFP Transceivers
• 4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
• Must select min 1 power supply 1U - Height
2, 3, 4 HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
• Power supply included
1U - Height
HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 24G PoE+ 4SFP+ El 5140 JL827A
No Localized Power Cord Selected
2, 3, 4 HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
• 24 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
• Power supply included
1U - Height
HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 24G 4SFP+ EI 5140 JL828A
• No Localized Power Cord Selected
2, 3, 4 HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
• 48 RJ-45 autosensing 10/100/1000 ports
• 4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
• Power supply included
1U - Height
HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829A
• No Localized Power Cord Selected

Page 11
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

2, 3, 4 HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A

• 24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP+ Ports, 2 XGT Ports
• min=0 \ max=2 SFP+ Transceivers
• Power supply included
• 1U - Height
HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 24G 2SFP+ 2XGT EI 5140 R8J41A
• No Localized Power Cord Selected
1, 3, 4 HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A
• 8 RJ-45 autosensing 10/100/1000 ports
• 2 SFP Ports, 2 GT Ports (4 port combo unit, can use 1 pair of 2 ports at a time)
• min=0 \ max=2 SFP Transceivers
• Power supply included
• 1U - Height
HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A
• C15 PDU Jumper Cord (ROW)
HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE Networking Comware Switch 8G 2SFP 2GT Combo EI 5140 R8J42A
• No Localized Power Cord Selected
Configuration Rules
Rule # Description
1 The following Transceivers install into this Switch: (SFP Ports)
HPE Networking X115 100M SFP LC FX Transceiver JD102B
HPE Networking X110 100M SFP LC LX Transceiver JD120B
HPE Networking X115 100M SFP LC BX 10-U Transceiver JD100A
HPE Networking X115 100M SFP LC BX 10-D Transceiver JD101A
HPE Networking X120 1G SFP LC SX Transceiver JD118B
HPE Networking X120 1G SFP LC LX Transceiver JD119B
HPE Networking X120 1G SFP RJ45 T Transceiver JD089B
HPE Networking X120 1G SFP LC BX 10-U Transceiver JD098B
HPE Networking X120 1G SFP LC BX 10-D Transceiver JD099B
HPE Networking X120 1G SFP LC LH100 Transceiver JD103A
2 The following Transceivers install into this Switch: (SFP+ Ports)
HPE Networking X120 1G SFP LC SX Transceiver JD118B
HPE Networking X120 1G SFP LC LX Transceiver JD119B
HPE Networking X120 1G SFP RJ45 T Transceiver JD089B
HPE Networking X120 1G SFP LC BX 10-U Transceiver JD098B
HPE Networking X120 1G SFP LC BX 10-D Transceiver JD099B
HPE Networking X120 1G SFP LC LH100 Transceiver JD103A
HPE Networking X130 10G SFP+ LC SR Transceiver JD092B
HPE Networking X130 10G SFP+ LC LR Transceiver JD094B
HPE X130 10G SFP+ LC BiDi 10km-Uplink Transceiver JL737A
HPE X130 10G SFP+ LC BiDi 10km-Downlink Transceiver JL738A
HPE X130 10G SFP+ LC BiDi 40km-Uplink Transceiver JL739A

Page 12
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

HPE X130 10G SFP+ LC BiDi 40km-Downlink Transceiver JL740A

HPE Networking X240 10G SFP+ SFP+ 0.65m DAC Cable JD095C
HPE Networking X240 10G SFP+ SFP+ 1.2m DAC Cable JD096C
HPE Networking X240 10G SFP+ SFP+ 3m DAC Cable JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable JL292A
3 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord), #B2E or
#AC3. (See HPN Localization Menu)
4 #B2E is Offered only in NA, Mexico, Taiwan and Japan.
Notes: − Drop down under power supply should offer the following options and results:
o Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
o Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default
for BTO and Box Level CTO)
o High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered
only in North America, Mexico, Taiwan, and Japan)
o No Localized Power Cord Selected - #AC3 Option
− OCA Only Model Selection Form -
HPE Offering > HPE Aruba Networking > Switches - FlexNetwork:
5140 EI Switch Series
Transceivers
SFP Transceivers
Notes: Enter the following menu selections as integrated to the CTO Model X above if order is factory built.
Rule # Description SKU
HPE Networking X115 100M SFP LC FX Transceiver JD102B
HPE Networking X110 100M SFP LC LX Transceiver JD120B
HPE Networking X115 100M SFP LC BX 10-U Transceiver JD100A
HPE Networking X115 100M SFP LC BX 10-D Transceiver JD101A
HPE Networking X120 1G SFP LC SX Transceiver JD118B
HPE Networking X120 1G SFP LC LX Transceiver JD119B
HPE Networking X120 1G SFP RJ45 T Transceiver JD089B
HPE Networking X120 1G SFP LC BX 10-U Transceiver JD098B
HPE Networking X120 1G SFP LC BX 10-D Transceiver JD099B
HPE Networking X120 1G SFP LC LH100 Transceiver JD103A
SFP+ Transceivers
Rule # Description SKU
HPE Networking X130 10G SFP+ LC SR Transceiver JD092B
HPE Networking X130 10G SFP+ LC LR Transceiver JD094B
HPE X130 10G SFP+ LC BiDi 10km-Uplink Transceiver JL737A
HPE X130 10G SFP+ LC BiDi 10km-Downlink Transceiver JL738A
HPE X130 10G SFP+ LC BiDi 40km-Uplink Transceiver JL739A
HPE X130 10G SFP+ LC BiDi 40km-Downlink Transceiver JL740A
HPE Networking X240 10G SFP+ SFP+ 0.65m DAC Cable JD095C
HPE Networking X240 10G SFP+ SFP+ 1.2m DAC Cable JD096C
HPE Networking X240 10G SFP+ SFP+ 3m DAC Cable JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable JL292A

Page 13
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

Cables
Multi-Mode Cables
Rule # Description SKU
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable AJ835A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 1m Cable QK732A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 2m Cable QK733A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 5m Cable QK734A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 15m Cable QK735A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 30m Cable QK736A
HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 50m Cable QK737A
Internal Power Supplies
HPE X361 150W DC Power Supply
Rule # Description SKU
1, 2 HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B
Notes: Includes 1 x c13, 150w
HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B
Notes: C13 PDU Jumper Cord (NA/MEX/TW/JP)
HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B
Notes: C13 PDU Jumper Cord (ROW)
HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B
Notes: HPE 2.3m C13 to NEMA 6-15P Pwr Cord(J9936A)
HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B
Notes: No Localized Power Cord Selected
Configuration Rules
Rule # Description
1 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for
switch . (Offered only in North America, Mexico, Taiwan, and Japan)
2 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See
Localization Menu)REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C
should be the Defaulted Power Cable option on the Switches/Routers.
Notes: − Drop down under power supply should offer the following options and results:
o Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico,
Taiwan, and Japan or #B2C ROW. (OCA Default B2B or B2C for Rack Level CTO)
o Switch/Router/Power Supply to Wall Power Cord - Localized Option (OCA Default for
BTO)
o High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered
only in North America, Mexico, Taiwan, and Japan)
o No Localized Power Cord Selected - #AC3 Option

Page 14
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Configuration Information

Switch Enclosure Options

Rack Mount Kits
Rule # Description SKU
HPE 5140 Rack Mount Kit R8M91A
External/Redundant Power Supplies
Rule # Description SKU
2, 3, 5, 6 HPE Networking RPS 800 Redundant Power Supply JD183A
Notes: Height = 1U
includes 1 x c13, 800w
2, 3, 5 HPE RPS1600 Redundant Power System JG136A
Notes: Height = 1U
includes 1 x c13, 1600w and Power Supply port
1, 5 HPE RPS1600 1600W AC Power Supply JG137A
Notes: Installs into JG136A only
Configuration Rules
Rule # Description
1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be
on order or onsite.
2 Localization required. (See Localization Menu for list.)
3 Only 1 JD183A or JG136A can be connected per switch.
5 Supported on JL827A and JL824A
6 Supported on JL826A only when connected to DC Power Supply JD366B with cable JD186A.
External/Redundant Power Cables
Rule # Description SKU
1 HPE X290 500 V 1m RPS Cable JD186A
2 HPE X290 1000 A JD5 2m RPS Cable JD187A
3 HPE X290 1000 A JD5 NonPoE 2m RPS Cable JD188A
Configuration Rules
Rule # Description
1 Supported on JL826A with JD366B to connect to JD183A.
2 Supported on JL829A, JL827A, JL823A, JL825A to connect to JG136A.
3 Supported on JG829A and JL826A to connect to JG136A.

Page 15
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

HPE FlexNetwork 5140 24G 4SFP+ EI Switch (JL828A)

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height)
Weight 5.5 lb (2.5 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 95 Mpps
Routing/Switching 128 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 113°F (-5°C to 45°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic High-speed fan: 36.8 dB; ISO 7779
Electrical characteristics Frequency 50/60 Hz
Maximum heat 64/88 BTU/hr (67.52/92.84 kJ/hr)
dissipation
Voltage 100 - 240 VAC, rated
Current 2A
Maximum power rating 24 W
Idle power 19 W
Notes: − Idle power is the actual power consumption of the device with no ports
connected.
− Maximum power rating and maximum heat dissipation are the worst-
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance

Page 16
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)

I/O ports and slots 16 SFP 100/1000 Mbps ports
8 SFP dual-personality ports - 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and 1 RJ-45 serial console port
slots
Power supplies 2 power supply slots
1 minimum power supply required (ordered separately)
Physical characteristics Dimensions 17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
Weight 13.23 lb (6kg)
Memory and processor 512 MB SDRAM, 256 MB flash;
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 95 Mpps
Routing/Switching 128 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 113°F (-5°C to 45°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779

Page 17
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Electrical characteristics Frequency 50/60 Hz

Maximum heat 102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC
dissipation powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max.
Voltage 100 - 240 VAC
-48 to -60 VDC
Current 5A
Maximum power rating 60 W
Idle power 30 W
Notes: − Idle power is the actual power consumption of the device with no
ports connected.
− Maximum power rating and maximum heat dissipation are the worst-
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
− Power Ratings for AC Power Supply indicated above.
− For DC input power, Idle Power is 38W and Max is 68W.
− DC Max input current is 8A. Units are supplied without a power
supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC)
power supply.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

Page 18
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

HPE FlexNetwork 5140 48G 4SFP+ EI Switch (JL829A)

I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 9.04(d) x 1.72(h) in (44 x 23 x 4.36 cm) (1U height)
Weight 7.72 lb (3.5 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 131 Mpps
Routing/Switching 176 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 113°F (-5°C to 45°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 42.2 dB, High-speed fan: 49.3 dB; ISO 7779
Electrical characteristics Frequency 50/60 Hz
Maximum heat 130/153 BTU/hr (137.15/161.42 kJ/hr), For AC powered units. For DC
dissipation powered units heat dissipation is 130 BTU/hr min, 171 BTU/hr max
Voltage 100 - 240 VAC
-48 to -60 VDC
Current 10 A
Maximum power rating 44 W
Idle power 38 W
Notes: − Idle power is the actual power consumption of the device with no
ports connected.
− Maximum power rating and maximum heat dissipation are the worst-
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all
ports plugged in, and all modules populated.
− Power ratings for AC power indicated above. Current used is 5A Max
when DC Power used. For DC input power, idle power is 38W,
maximum DC power used is 50W.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance

Page 19
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 24G PoE+ 4SFP+ (370W) EI Switch (JL827A )

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T) with 4 combo ports (RJ-45 or SFP); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 10.24(d) x 1.72(h) in (44 x 26 x 4.36 cm) (1U height)
Weight 17.64 lb (8 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 95 Mpps
Routing/Switching 128 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 113°F (-5°C to 45°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 44.4 dB, High-speed fan: 53.6 dB; ISO 7779

Page 20
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Electrical Frequency 50/60 Hz

characteristics Maximum heat 102/1569 BTU/hr (107.61/1655.29 kJ/hr), for AC Power. For DC Power
dissipation min heat dissipation is 85 BTU/hr and max heat dissipation is 2695 BTU/hr
Voltage 100 - 240 VAC,
-54 to -57 VDC
Current 10 A
Maximum power rating 451 W
Idle power 30 W
PoE power 370 W PoE+
Notes: − Maximum power rating and maximum heat dissipation are the worst-
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power
supplied by the internal power supply. When supplemented with the
use of an HPE RPS1600 Redundant Power System, up to 740 W of
PoE+ can be supplied.
− Max current rating for DC power is 25A. AC Input power is 30W
typical, and 460W max(including 370W PoE+ consumption. DC Input
voltage range is -54 to -57VDC. Total DC input power is 25W Typical
and 790W with 740W PoE+ Power consumption. DC Input voltage
range is -54VDC to -57VDC. DC Input Source is the HPE RPS1600.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS
CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254;
YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 48G PoE+ 4SFP+ (370W) EI Switch (JL824A )

I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only
4 SFP+ fixed 1000/10000 SFP+ ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)
Weight 17.64 lb (8 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
enclosure separately)

Page 21
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Performance IPv6 Ready Certified

1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 131 Mpps
Routing/Switching 176 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 113°F (-5°C to 45°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 43.5 dB, High-speed fan: 52.8 dB; ISO 7779
Electrical Frequency 50/60 Hz
characteristics Maximum heat 160/1671 BTU/hr (168.8/1762.91 kJ/hr), for AC power. For DC power min
dissipation heat dissipation is 147 BTU/hr and 3037 BTU/hr max.
Voltage 100 - 240 VAC
-54 to -57 VDC
Current 10 A
Maximum power rating 478 W
Idle power 47 W
PoE power 370 W PoE+
Notes: − Idle power is the actual power consumption of the device with no
ports connected. Maximum power rating and maximum heat
dissipation are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in, and all modules
populated. PoE Power is the power supplied by the internal power
supply. When supplemented with the use of an HPE RPS1600
Redundant Power System, up to 740 W of PoE+ can be supplied.
− Max current rating for DC power is 25A. AC Input power is 47W
typical, and 490W max(including 370W PoE+ consumption. DC Input
voltage range is -54 to -57VDC. Total DC input power is 43W typical
and 890W with 800W PoE+ Power consumption. DC Input voltage
range is -54VDC to -57VDC. DC Input Source is the HPE RPS1600.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter
J; ROHS Compliance
Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager

Page 22
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 24G PoE+ 2SFP+ 2XGT (370W) EI Switch (JL823A )
I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-24 support 10BASE-T/100BASE-TX,
1000BASE-T (full only)
2 SFP+ fixed 1000/10000 SFP+ ports
2X1/2.5/5/10G BASE-T ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 12.6(d) x 1.72(h) in (44 x 32 x 4.36 cm) (1U height)
Weight 9.92 lb (4.5 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
enclosure separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 95 Mpps
Routing/Switching 128 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 122°F (-5°C to 50°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 44.4 dB, High-speed fan: 52.8 dB; ISO 7779
Electrical Frequency 50/60 Hz
characteristics Maximum heat dissipation 83.6/1433 BTU/hr (88.2/1511.9 kJ/hr)
Voltage 100 - 240 VAC
Current 10 A
Maximum power rating 420 W
Idle power 24.5 W
PoE power 370 W PoE+
Notes: Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated. PoE Power is the power supplied by the internal
power supply.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance

Page 23
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS
CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254;
YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 48G PoE+ 2SFP+ 2XGT (370W) EI Switch (JL825A )
I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only
2 SFP+ fixed 1000/10000 SFP+ ports
2X1/2.5/5/10G BASE-T ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 17.32(w) x 12.6(d) x 1.72(h) in (44 x 32 x 4.36 cm) (1U height)
Weight 13.23 lb (6 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
enclosure separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 131 Mpps
Routing/Switching 176 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 122°F (-5°C to 50°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 43.5 dB, High-speed fan: 52.8 dB; ISO 7779

Page 24
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Electrical Frequency 50/60 Hz

characteristics Maximum heat dissipation 117.7/1467 BTU/hr (124/1547.77 kJ/hr)
Voltage 100 - 240 VAC
Current 10 A
Maximum power rating 430 W
Idle power 34.5 W
PoE power 370 W PoE+
Notes: Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated. PoE Power is the power supplied by the internal
power supply.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS
CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254;
YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch (R8J42A )

I/O ports and slots 8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-8 support 10BASE-
T/100BASE-TX, 1000BASE-T (full only)
2 SFP fixed 1GbE ports
2 GT ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics Dimensions 10.47(w) x 6.3(d) x 1.72(h) in (26.6 x 16 x 4.36 cm) (1U height)
Weight 3.3 lb (1.5 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
enclosure separately)
Performance IPv6 Ready Certified
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 18 Mpps
Routing/Switching 24 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries

Page 25
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Environment Operating temperature 23°F to 122°F (-5°C to 50°C)

Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic High-speed fan: 36.8 dB; ISO 7779
Electrical characteristics Frequency 50/60 Hz
Maximum heat 27.3/51.2 BTU/hr (28.8/54 kJ/hr)
dissipation
Voltage 100 - 240 VAC
Current 10 A
Maximum power rating 15 W
Idle power 8W
Notes: Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated. PoE Power is the power supplied by the internal
power supply.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch (R8J41A)

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T
(full only)
2 SFP+ fixed 1000/10000 SFP+ ports
2X1/2.5/5/10G BASE-T ports
Additional ports and 1 RJ-45 serial console port
slots
Physical characteristics
Dimensions 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height)
Weight 5.51 lb (2.5 kg)
Memory and processor 512 MB SDRAM, 256 MB flash
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold
separately)

Page 26
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Performance IPv6 Ready Certified

1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput 95 Mpps
Routing/Switching 128 Gbps
capacity
Routing table size 1024 entries
MAC address table size 16384 entries
Environment Operating temperature 23°F to 122°F (-5°C to 50°C)
Operating relative 10% to 90%, noncondensing
humidity
Non-operating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Non-operating/Storage 5% to 95%, noncondensing
relative humidity
Acoustic Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779
Electrical characteristics Frequency 50/60 Hz
Maximum heat 49.5/112.6 BTU/hr (52.2/118.8 kJ/hr)
dissipation
Voltage 100 - 240 VAC
Current 10 A
Maximum power rating 33 W
Idle power 14.5 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated. PoE Power is the power supplied by the internal
power supply.
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR
Subchapter J; ROHS Compliance
Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS;
AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386;
GB/T 9254; YD/T 993
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

Page 27
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Standards and Protocols (Applies to all products in series)

Device Management
• RFC 1157 SNMPv1/v2c
• RFC 1305 NTPv3
• RFC 2573 (SNMPv3 Applications)
• RFC 2819 (RMON groups Alarm, Event, History and Statistics only)
• RFC 3416 (SNMP Protocol Operations v2)
• HTML and telnet management
• Multiple Configuration Files
• SNMP v3 and RMON RFC support
• SSHv1/SSHv2 Secure Shell
• TACACS/TACACS+
• Web UI

QoS/CoS
• RFC 2474 DS Field in the IPv4 and IPv6 Headers
• RFC 3260 New Terminology and Clarifications for DiffServ

General Protocols
• IEEE 802.1ad Q-in-Q
• IEEE 802.1ak Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP)
• IEEE 802.1AX-2008 Link Aggregation
• IEEE 802.1D MAC Bridges
• IEEE 802.1p Priority
• IEEE 802.1Q VLANs
• IEEE 802.1s Multiple Spanning Trees
• IEEE 802.1w Rapid Reconfiguration of Spanning Tree
• IEEE 802.1X PAE
• IEEE 802.3 Type 10BASE-T
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3ac (VLAN Tagging Extension)
• IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• IEEE 802.3ae 10-Gigabit Ethernet
• IEEE 802.3af Power over Ethernet
• IEEE 802.3at Power over Ethernet Plus
• IEEE 802.3az Energy Efficient Ethernet
• IEEE 802.3i 10BASE-T
• IEEE 802.3u 100BASE-X
• IEEE 802.3x Flow Control
• IEEE 802.3z 1000BASE-X
• RFC 768 UDP
• RFC 783 TFTP Protocol (revision 2)
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
• RFC 854 TELNET
• RFC 855 Telnet Option Specification
• RFC 894 IP over Ethernet

Page 28
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

• RFC 950 Internet Standard Subnetting Procedure

• RFC 951 BOOTP
• RFC 1027 Proxy ARP
• RFC 1042 IP Datagrams
• RFC 1071 Computing the Internet Checksum
• RFC 1123 Requirements for Internet Hosts
• RFC 1166 - IP Addresses
• RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
• RFC 1256 ICMP Router Discovery Protocol (IRDP)
• RFC 1305 NTPv3
• RFC 1350 TFTP Protocol (revision 2)
• RFC 1519 CIDR
• RFC 1533 DHCP Options and BOOTP Vendor Extensions
• RFC 1591 DNS (client only)
• RFC 1643 - Definitions of Managed Objects for the Ethernet-like Interface Types
• RFC 1812 IPv4 Routing
• RFC 1866 Hypertext Markup Language - 2.0
• RFC 1901 - Introduction to Community-based SNMPv2
• RFC 1902-1907 - SNMPv2
• RFC 2131 DHCP
• RFC 2236 IGMP Snooping
• RFC 2462 IPv6 Stateless Address Autoconfiguration
• RFC 2474 Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers
• RFC 2475 Architecture for Differentiated Services
• RFC 2597 Assured Forwarding PHB Group
• RFC 2616 HTTP Compatibility v1.1
• RFC 2665 Definitions of Managed Objects for the Ethernet-like Interface Types
• RFC 2668 Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs)
• RFC 2865 Remote Authentication Dial In User Service (RADIUS)
• RFC 2866 RADIUS Accounting
• RFC 3046 - DHCP Relay Agent Information Option
• RFC 3246 Expedited Forwarding PHB
• RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)
• RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)
• RFC 3416 Protocol Operations for SNMP
• RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
• RFC 3576 Ext to RADIUS (CoA only)
• RFC 3580 - IEEE 802.1X Remote Authentication Dial In User Service (RADIUS) Usage Guidelines
• RFC 3587 IPv6 Global Unicast Address Format
• RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
• RFC 4030 Authentication Suboption for DHCP Relay Agent
• RFC 4213 Basic IPv6 Transition Mechanisms
• RFC 4291 IP Version 6 Addressing Architecture
• RFC 4541 Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD)
Snooping Switches
• RFC 4575 A Session Initiation Protocol (SIP) Event Package for Conference State
• RFC 4675 RADIUS VLAN & Priority
• RFC 5095 Deprecation of Type 0 Routing Headers in IPv6
• 802.1r - GARP Proprietary Attribute Registration Protocol (GPRP)

Page 29
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

IPv6
• RFC 1981 IPv6 Path MTU Discovery
• RFC 2460 IPv6 Specification
• RFC 2461 IPv6 Neighbor Discovery
• RFC 2463 ICMPv6
• RFC 2464 Transmission of IPv6 over Ethernet Networks
• RFC 3162 RADIUS and IPv6
• RFC 3306 Unicast-Prefix-based IPv6 Multicast Addresses
• RFC 3315 DHCPv6 (client and relay)
• RFC 3484 Default Address Selection for IPv6
• RFC 3736 Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6
• RFC 4291 IP Version 6 Addressing Architecture
• RFC 4293 MIB for IP
• RFC 4443 ICMPv6
• RFC 4861 IPv6 Neighbor Discovery
• RFC 4862 IPv6 Stateless Address Auto-configuration
• RFC 6724 Default Address Selection for Internet Protocol Version 6 (IPv6)

MIBs
• RFC 1212 Concise MIB Definitions
• RFC 1213 MIB II
• RFC 1493 Bridge MIB
• RFC 1757 Remote Network Monitoring MIB
• RFC 2096 IP Forwarding Table MIB
• RFC 2233 Interface MIB
• RFC 2571 SNMP Framework MIB
• RFC 2572 SNMP-MPD MIB
• RFC 2573 SNMP-Notification MIB
• RFC 2573 SNMP-Target MIB
• RFC 2574 SNMP USM MIB
• RFC 2618 RADIUS Authentication Client MIB
• RFC 2620 RADIUS Accounting Client MIB
• RFC 2665 Ethernet-Like-MIB
• RFC 2668 802.3 MAU MIB
• RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
• RFC 2737 Entity MIB (Version 2)
• RFC 2819 RMON MIB
• RFC 2863 The Interfaces Group MIB
• RFC 2925 Ping MIB
• RFC 3414 SNMP-User based-SM MIB
• RFC 3415 SNMP-View based-ACM MIB
• RFC 3418 MIB for SNMPv3
• RFC 3621 Power Ethernet MIB

IP Multicast
• RFC 1112 IGMPv1
• RFC 3376 IGMPv3

Page 30
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Technical Specifications

Network Management
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
• RFC 2579 Textual Conventions for SMIv2
• RFC 2580 Conformance Statements for SMIv2
• RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
• ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
• SNMPv1/v2c/v3

Security
• IEEE 802.1X Port Based Network Access Control
• RFC 1492 TACACS+
• RFC 2138 RADIUS Authentication
• RFC 2139 RADIUS Accounting
• RFC 2865 RADIUS (client only)
• RFC 2866 RADIUS Accounting
• RFC 3260 New Terminology and Clarifications for DiffServ
• Secure Sockets Layer (SSL)
• SSHv2 Secure Shell

Page 31
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Summary of Changes

Date Version History Action Description of Change:

04-Dec-2023 Version 12 Changed Series name was updated.
17-Apr-2023 Version 11 Changed Standard Features section was updated.
20-Feb-2023 Version 10 Changed Technical Specifications section was updated.
03-Oct-2022 Version 9 Changed Configuration Information section was updated.
06-Jun-2022 Version 8 Changed Standard Features section was updated.
16-May-2022 Version 7 Changed Configuration Information and Technical Specifications sections were
updated.
18-Apr-2022 Version 6 Changed Configuration Information and Technical Specifications sections were
updated.
17-Jan-2022 Version 5 Changed Technical Specifications section was updated.
06-Dec-2021 Version 4 Changed Technical Specifications section was updated.
25-Oct-2021 Version 3 Changed Technical Specifications section was updated.
02-Aug-2021 Version 2 Changed Overview, Standard Features, Configuration Information, and Technical
Specifications sections were updated, and SKUs were added.
07-Jun-2021 Version 1 New New QuickSpecs

Page 32
QuickSpecs HPE Networking Comware Switch Series 5140 EI

Copyright

Make the right purchase decision.

Contact our presales specialists.

Get updates
© Copyright 2023 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.

Products within this series are IPv6 Ready certified. See the Specifications section of this series for more
information.

To learn more, visit: http://www.hpe.com/networking

a50002579enw - 16734 - Worldwide - V12 - 04-December-2023

Page 33