0% found this document useful (0 votes)
9 views1 page

AdBlue Solutions for SCR Vehicles

Uploaded by

hhasnidabinti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
9 views1 page

AdBlue Solutions for SCR Vehicles

Uploaded by

hhasnidabinti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Puma ADBLUE

 Highway Trucks
Puma Adblue is made from automotive grade urea and de-ionized water. It is
 Off highway equipment
used to breakdown the NOx from the exhaust of Selective Catalytic Convertor
fitted engines. It converts the NOx within the SCR to nitrogen and water, thus  Agriculture equipment
reducing the NOx in the exhaust.

Recommendations
Puma Adblue is suitable for all vehicles fitted with SCR including:
• Highway trucks
• Off highway equipment
• Agricultural equipment
• Passenger cars

Puma AdBlue must not be diluted or in any way contaminated with any other products. This could lead to the vehicle
going into “limp home” mode and damage to the AdBlue injection system.

Typical Physical Characteristics


The high quality urea solution also known as AUS 32 is defined by the standard ISO 22241 specification,
“Diesel engines – NOx reducing agent AUS 32” Part 1, quality requirements, Part 2, test methods, and Part 3,
handling, transportation and storage”.
Specifications AUS 32, according to ISO 22241-1
Urea 31.8-33.2 % by weight
Alkalinity as NH3 max 0.2 % by weight
Biuret max 0.3 % by weight
Insolubles max 20 mg/kg
Aldehyde max 5 mg/kg
Phosphate (PO4) max 0.5 mg/kg
Aluminium max 0.5 mg/kg
Calcium max 0.5 mg/kg
Iron max 0.5 mg/kg
Copper max 0.2 mg/kg
Zinc max 0.2 mg/kg
Chromium max 0.2 mg/kg
Nickel max 0.2 mg/kg
Magnesium max 0.5 mg/kg
Sodium max 0.5 mg/kg
Potassium max 0.5 mg/kg
3
Density at 20°C max 1087-1093 Kg/m
These characteristics are typical of current product methods whilst future production will conform to Puma Lubricants specifications, variations in these physical
characteristics may occur.

Health & Safety Environment

• This product is unlikely to present any significant health and safety hazard when properly used in the recommended application and good standards of personal hygiene are
maintained.

• Avoid contact with eyes and skin, use proper impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on health and safety is
available on the appropriate Safety Data Sheet (SDS) which can be obtained from pumaenergypng.datasheetdownloads.com, sds.pumaenergy.com.au

Puma Energy Australia Puma Energy Singapore Puma Energy Papua New Guinea
365 Macarthur Ave, Hamilton, QLD 4007 10 Colyer Quay Ocean Financial Centre PO Box 1971, Port Moresby NCD
Ph +61 (7) 3457 2500 Singapore 049305 Ph +675 309 9300
Ph +65 63 19 2960

The information contained herein is accurate at the time of this review. However specifications change from time to time. Ensure specifications meet equipment manufacture
requirements.

You might also like