HG8245H5 Fast Setting telecomadmin Logout
WAN
WAN Configuration
LAN On this page, you can set WAN port parameters. A home gateway communicates with an upper-layer device using the WAN
port. During the communication, WAN port parameters must be consistent with upper-layer device parameters.
Security
New Delete
Route Connection Name VLAN/Priority Protocol Type
1_INTERNET_R_VID_700 700/0 IPv4
Forward Rules
Application Basic Information
Enable WAN:
WLAN
Encapsulation Mode: IPoE PPPoE
Voice Protocol Type: IPv4
WAN Mode: Route WAN
System Management
Service Type: INTERNET
Maintenance Diagno... Enable VLAN:
VLAN ID: 700 *(1-4094)
802.1p Policy: Use the specified value
802.1p: 0
MRU: 1492 (1-1540)
User Name: b00005983413
Password: ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Enable LCP Detection:
LAN1 LAN2 LAN3 LAN4
Binding Options:
SSID1 SSID2 SSID3 SSID4
IPv4 Information
IP Acquisition Mode: Static DHCP PPPoE
Enable NAT:
NAT type: Port-restricted cone NAT
Enable DNS Override:
Dialing Method: Automatic
Multicast VLAN ID: (0-4094; 0 indicates untagged VLAN.)
Apply Cancel