0% found this document useful (0 votes)
346 views49 pages

CP-CP22065 Discover Our Formulation Universes in Cos Korea May 2022 - Compressed

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
346 views49 pages

CP-CP22065 Discover Our Formulation Universes in Cos Korea May 2022 - Compressed

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 49

Discover

Our Formulation Universes

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022


SEPIPLUS™ K a Graceful Touch for Clean Beauty

CLEAN PERFORMING SENSORIAL

Concentrated liquid polymer


Solvent Silicone-like gliding
Preservative free Multifunctional
Thickening Non-sticky & non-tacky
EO
Emulsifying-stabilizing
Emotional benefits
Cold processable Texturizing
Non-microplastic Pre-neutralized
Multifunctional thus suitable for Large pH range 3 to 12
minimalist formulation concepts
Non sensitive to heat or shear
EWG friendly
Dominant elastic network for
Halal certified; Vegan suitable improved stability

10186 GB 01 October 2021 - SEPIPLUS™ K - Presentation 2


AS40140A I CLEAN MOISTURE LOTION
SKIN CARE

A MONTANOV™ L 1.50% MONTANOV™ L associated with SEPIPLUS™ K


EMOGREEN™ L15 4.00% stabilizes the formula and provides liquid crystal
Caprylic/Capric Triglyceride 4.00% structure which offers long term moisturizing effect
combined with AQUAXYL™!
B Water Up to 100.00% MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside )

Glucolipid emulsifier in harmony with nature. MONTANOV™ L is well-suited to formulate different textures
SOLAGUM™ AX 0.10% (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes
Glycerin 3.00% emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent the skin
from dehydration (efficacy proven in vivo). Ecocert and Natrue approved.
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
C SEPIPLUS™ K 0.70% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
MADECASSOSIDE (Madecassoside)

D AQUAXYL™ 1.50% MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin
and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin).
Phenoxyethanol and 0.70% EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
Ethylhexylglycerin MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile
Caprylyl glycol and 0.30% silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.
Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used
Ethylhexylglycerin in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum)

Combination of natural thickening polymers. It allows you to formulate non-stringy translucent gels and
E MADECASSOSIDE 0.20%
©UNSPLASH

can be used with hot or cold process. Ecocert and Natrue approved.
Water 2.00% SEPIPULS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10 Laurate)

NOC= Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a
slippery silicone-like feel and can be used to reduce the use of silicone in formulas. Compatible with
98,6% White Lotion / Packaging: Pump Ethylene Oxide free formulas and Clean Beauty concept.
pH: 6.0 / VISCOSITIES: 1M at RT: 10 300 mPa.s Brookfield LV2-6 /
NATURALITY
Recovery at RT (after 1M at 45°C): 10 100 mPa.s Brookfield LV2-6.
Clean
PROFILE
according to
ISO 16128 norm STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.

Moisturization PROCEDURE ADVICES / Weigh ingredients of phase A and heat to


80℃. Disperse SOLAGUM™ AX in water and heat phase B 80℃.
ADDITIONAL INGREDIENTS: Caprylic capric triglyceride - Myritol 318 (BASF ) / Phenoxyethanol and
Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR)./ Caprylyl glycol and Ethylhexylglycerin - Sensiva SC 10
(SCHÜLKE & MAYR).
Pre-disperse phase C in phase A, add phase B into phase A+C,
Soothing homogenize it by Silverson at 4000 rpm for 5 minutes. Stir the
emulsion under anchor stirring 100 rpm and gentle cooling. Mix phase
E until clear. Add phase D and E into the emulsion and stir it under
anchor stirring at 150 rpm until uniform. A formula related to “Clean Cosmetics” concept.
More informations available on seppic.com
LX201805-2005

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40139A I CLEAN MOISTURE CREAM
SKIN CARE

A MONTANOV™ 68 MB 1.00%
MONTANOV™ 68 MB + 202 associated with
MONTANOV™ 202 2.00%
SEPIPLUS™ K stabilizes the formula and provides
EMOGREEN™ L15 6.00%
liquid crystal structure which offers long term
Caprylic Capric Triglyceride 6.00%
moisturizing effect combined with AQUAXYL™!
MONTANOV™ 68 MB (Cetearyl Alcohol and Cetearyl Glucoside )

Glucolipid emulsifier derived from vegetable origin. It can be used to formulate rich, smooth textures with
B Pure Water Up to 100.00% any type of oil phase. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time.
Ecocert, Cosmos and Natrue approved.
SOLAGUM™ AX 0.10%
MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
Glycerin 3.00% Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining
skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to
keep skin moisturized. Ecocert and Natrue approved.
C SEPIPLUS™ K 0.80% AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
D AQUAXYL™ 1.50% MADECASSOSIDE (Madecassoside)

Phenoxyethanol and Ethylhexylglycerin 0.70% MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin
and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin).
Caprylyl glycol and Ethylhexylglycerin 0.30% EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))

MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile
silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.
E MADECASSOSIDE 0.20% Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used
©UNSPLASH

in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).


Pure Water 2.00%
SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum)

NOC= Combination of natural thickening polymers. It allows you to formulate non-stringy translucent gels and
98,6% White Cream / Packaging: Jar
can be used with hot or cold process. Ecocert and Natrue approved.
SEPIPLUS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10 Laurate)
pH: 6.1 / VISCOSITIES: 1M at RT: 29 800 mPa.s Brookfield LV3-6 / EWG-friendly liquid concentrated polymer, easy to use pre neutralized and cold-processable.
NATURALITY
Recovery at RT (after 1M at 45°C): 28 700 mPa.s Brookfield LV3-6.
Clean
PROFILE
according to
ISO 16128 norm STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.

Moisturization PROCEDURE ADVICES / Weigh ingredients of phase A and heat to


80℃. Disperse SOLAGUM™ AX in water and heat phase B 80℃.
Pre-disperse phase C in phase A, add phase B into phase A+C,
Soothing
ADDITIONAL INGREDIENTS: Caprylic Capric Triglyceride - Myritol 318 (BASF ) / Phenoxyethanol and
homogenize it by Silverson at 4000 rpm for 5 minutes. Stir the Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR)./ Caprylyl glycol and Ethylhexylglycerin - Sensiva SC 10
(SCHÜLKE & MAYR).
emulsion under anchor stirring 100 rpm and gentle cooling. Mix phase
E until clear. Add phase D and E into the emulsion and stir it under
anchor stirring at 150 rpm until uniform. A formula related to CLEAN COSMETICS concept.
More informations available on seppic.com
LX201804-2005

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40132A I SUN GEL SPF30
Calculated SPF 30 PA++
SUN CARE
A SEPIPLUS™ K 1.00% SEPIPLUS™ K has powerful stabilizing ability &
Ethylhexyl Methoxycinnamate 7.50% provides none sticky sensory after using !
Bis-Ethylhexyloxyphenol Methoxyphenyl 3.00%
Triazine
LANOL™ 99 2.00%
SEPIPLUS™ K (Polyacrylate-13 and Hydrogenated Polyisobutene and Polyglyceryl-10
LANOL™ 37T 5.00% Laurate)
EWG-friendly liquid concentrated polymer, easy to use pre neutralized and cold-processable.
B D.I Water Up to 100.00%
SEPIMAT™ CP 5 (Methyl Methacrylate Crosspolymer)
C Methylene Bis-Benzotriazolyl 5.00% SEPIMAT™ CP5 is a versatile texturizing agent, consisting of solid spheres with a
Tetramethylbutylphenol smooth surface. These ultra-soft microspheres do not dry out the skin and are perfect
SEPIMAT™ CP 5 3.00% for all types of formulations. In formulation, it imparts a soft and powdery feel onto the
skin with a matte finish. At higher percentages of SEPIMAT™ CP5 result in a more
Phenoxyethanol (and) Ethylhexylglycerin 1.00%
pronounced powdery feel.
Phenylpropanol (and) Caprylyl Glycol 0.50%
LANOL™ 37T (Triheptanoin)
D Citric Acid (20%) Q.S. LANOL 37T is a good organic sunscreen solubilizer.

LANOL™ 99 (Isononyl Isononanoate)


Emollient agent. Polar ester. Soft and light touch, non greasy finish and short play-time.
©UNSPLASH

Yellowish Cream / Packaging: Tube


SPF30 PA++ pH: 6.5 / VISCOSITIES: 1M at RT: 24 400mPa.s Brookfield LV2-6 / ADDITIONAL INGREDIENTS: Ethylhexyl Methoxycinnamate - PARSOL MAC (DSM) / Bis-Ethylhexyloxyphenol
Methoxyphenyl Triazine - Tinosorb S (BASF) / Methylene Bis-Benzotriazolyl Tetramethylbutylphenol – Tinosorb M
Recovery at RT (after 1M at 45°C): 24 350mPa.s Brookfield LV2-6. (BASF) / Phenoxyethanol (and) Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE AND MAYR) / Phenylpropanol (and)
Smooth STABILITY: Stable M1 at RT, 45°C,-18°C and cycles -5°C/+40°C. Caprylyl Glycol - sensiva® PA 40 (SCHÜLKE AND MAYR).

PROCEDURE ADVICES / Mix UV filters with emollients in phase A and heat to 85℃
None Sticky! until clear, and then disperse Sepiplus K into phase A and stir it until homogeneous.
Heat phase B to 85℃. Add phase B to phase A by stirring at 150 rpm with anchor
stirrer, homogenize it at 4000 rpm for 4 minutes. Cool down, add phase C and stir it
with anchor stirrer at 300 rpm for 5 min. Add phase D to adjust pH value to 6.5 and stir
it gently until homogeneous.
LX201803-2005

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
Upgraded
Cleansers

10157/GB/01/June 2021 - Discover our natural world 6


Cleansers with a Brain KOREA - Glowing cleanse

Clean cleansing/ low pH


Non Ecotoxic/ Biodegradability
Solid cleansers
Waterless/ Less water
USA - Clean & Exfoliate

AHA/BHA cleansers
Superfood EUROPE - Sustainable above all
Creamy textures CosrXLow pH
Dry / Sensitive skins CHINA - Sensitive skin Cleansing foam

Micellar waters
Solid cleansers Foam JAPAN - Rituals
Minimalist Oil Control
Upcycling Water based Double cleansing (oil
No packaging Amino acid based + cleanser)
Mild cleansing High foam
GLOSSIER
Moisturizing Barrier protection
Cleanser Concentrate
LUSH Jade Roller Naked
Cleansing Balm

ZHIBEN Soothing
recovery cleanser DHC Deep
Cleansing OIl

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 7


Elevate cleansers to skin heros

Skin Minimalism Solid & Waterless Psychodermatology


In China 40% of Adults Waterless, solid brands Beauty with a Brain, it
are seeking cleansers with a genuine care for links skin with psyche.
with strong cleansing humans and the planet This concept aligns with
properties while caring are the ones to watch Wellness and mental
for the skin health awareness
Short INCI list Promote relaxation and
boost mood

Super Facialist Purifying Waterless Shampoo Tabs. Change Hand sanitizer tabs. MIP Vita Cleansing foam
Cleansing wash Just crush, add water drops Kill germs without the single use Loum Beauty of Calm use yellow foam and Vit B,C
Use of Sal Acid and Niacinamide create à paste and use as normal plastic, dissolves easily in water. Stress Detox Enzymatic and E to boost energy and
as key ingredients Cleanser clean

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 8


AS40075 I SMOOTH BI-PHASE MAKEUP REMOVER
Bi-Phasic with strong cleansing power
HYGIENE

A Bi-phasic solution with Stable interface


A Water 48.2% thanks to FLUIDANOV™ 20X .
AQUAXYL™ 2.00%
Butylene Glycol 3.00% Strong cleansing and quick phases separation.
Sodium Chloride 0.30% AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
Magnesium Chloride 0.10% Aquaxyl™ moisturizes and restructures the skin by harmonizing hydric flows of the skin.
Phenoxyethanol Methylparaben Water reserves are instantly boosted, water circulation is improved in all skin layers and
Ethylparaben Ethylhexylglycerin water loss is reduced (in vitro and in vivo tests proven). Its mechanism of action has
been validated by cosmetogenomics. Ecocert and Natrue approved.
Polypropylene Glycol 0.30%
B EMOSMART™ L15 (C13-15 Alkane)
EMOSMART™ L15 23.00%
EMOSMART™ L15 is a high-purity, non polar, and biodegradable emollient. This high
EMOSMART™ L19 23.00%
purity alkane shows an excellent compatibility with all types of oils, especially with
FLUIDANOV™ 20X 0.02% silicone oils. It gives a fresh and vanishing texture with a dry and matt afterfeel. Inert and
CI6115651 (2%) 0.06% stable, it can be used in all types of applications, even in extreme conditions (pH,
Fragrance 0.10% oxidizing/reducing media…)

EMOSMART™ L19 (C15-19 Alkane, (natural & renewable)


EMOSMART™ L19 is a high-purity, non polar and biodegradable emollient. It shows an
excellent compatibility with all types of oils and helps to disperse minerals (TiO2/ZnO). It
gives a fresh and vanishing texture with a matt afterfeel. Inert and stable, it can be used
in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).

Bi Phasic solution / Packaging: bottle FLUIDANOV™ 20X (Octyldodecanol and Octyldodecyl Xyloside)

pH: NA “EAS’EMOLLIENT” from original xylolipidic emulsifier, extra-fluid, easy-to-use,


Bi-Phase with strong cleansing VISCOSITIES: 1M at RT: water fluid
FLUIDANOV™20X is a smart emollient: texturing effect in cream gels, it will also
contribute to stabilize W/O emulsions and improve skin feeling.
Recovery at RT (after 1M at 45°C): water fluid
Even waterproof make-up STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C., 1 month Freeze Thaw

Mild cycles -5/+40°C


ADDITIONAL INGREDIENTS: Sodium Chloride GUOYAO/ Magnesium Chloride GUOYAO / Phenoxyethanol
FORMULATION ADVICES / A: weight phase A and mix well, make 2% Methylparaben Ethylparaben Ethylhexylgycerin Polypropylene Glycol EUXYL K350 SCHULKE & MAYR/ CI615654
Gentle for eyes! pigment solution by EMOSMART™ L15 / B: weight phase B and mix
well. Dispatch phase A and B in the packaging respecting the ratio.
COLD
(2%) Unicert Green K7016-J LCW/ Fragrance Frag 86318953 DROM

PROCESS

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
AS40114A I SILK SOFT ROSE OIL FOAM
Rose essence in a foam!
HYGIENE

Creamy and rich foam for a SPA like experience


A AMONYL™ 380 BA 9.00%
AMONYL™ 675 SB 3.00% Destressing foam with essential oils!
ORAMIX™ L30 10.00%
PROTEOL™ APL EF 5.00%
ORAMIX™ L30 (Sodium Lauroyl Sarcosinate)
ORAMIX™ CG110 5.00%
Alternative to LESNa in sulfate free formulations. Respects the structure of the skin and provides
PEG-7 Glyceryl Cocoate 1.50% abundant, light and soft foam

B Water up to 100% ORAMIX™ CG 110 (Caprylyl/ Capryl Glucoside)


Sapindus Mukorossi Fruit extract 0.50% Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because
CAPIGEL™ 98 4.00% it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing
effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used
to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
C Sodium Hydroxide (20%) 0.90% AMONYL™ 380 BA (Cocamidopropyl Betaine))
Provides a fine foam that is stable over time. Ecocert approved.
D AQUAXYL™ 1.00% Readily biodegradable : 100% in 28 days* with * : OECD 301 B method”
Citrus Limon (lemon) Peel Oil 0.12% AMONYL™ 675 SB (Cocamidopropyl Hydroxysultaine)
Camelia Sinensis Leaf Oil 0.08% Provides a fine foam that is stable over time. Provides significantly greater conditioning properties
Citrus Aurantium Dulcis (orange) Flower Oil 0.10% compared to classical betaines
Rosa Canina Fruit Oil 0.50% Readily biodegradable : 67% in 28 days* with * : OECD 301 B method”
Pelargonium Graveolens Oil 0.20%
PROTEOL™ APL EF (Sodium Cocoyl Apple Aminoacids)
Methylchloroisothiazolinone & Fruit surfactant, derived from essential amino-acids present in apple juice, for a gentle approach:
©UNSPLASH

Methylisothiazolinone 0.10% unctuous foam, extremely mild to the skin and the eyes and also respectful of the environment.
Readily biodegradable : 95% in 28 days* with * : OECD 301 B method”

CAPIGEL™ 98 (Acrylates Copolymer)


Ready-to-use thickening liquid polymer that creates high viscosity in aqueous media following
Yellowish Clear Liquid / Packaging: pump neutralization (pH> 6.5). It also produces perfectly clear gels with a good resistance to electrolytes and
polar solvents
pH: 6.6
Abundant & pleasant foam VISCOSITIES: 1M at RT: 6000 mPa.s Brookfield LVDV1 S62-V6 /
Recovery at RT (after 1M at 45°C): 6100mPa.s Brookfield LVDV1 S62-V6.
Senses activation with wellbeing for STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C. ADDITIONAL INGREDIENTS: Methylchloroisothiazolinone & Methylisothiazolinone EUXYL K100 (Schulke & Mayr)/
PEG-7 Glyceryl Cocoate Cetiol HE (BASF)/ Sapindus Mukorossi Fruit Extract SanSoap III (Sanhetian)/ Cirus Limon
a stress less experience (Lemon Peel OIl) WangXiang/ Camelia Sinensis Leaf Oil WangXiang/ Citrus Aurantium Dulcis (orange) WangXiang/
Rosa Canina Fruit Oil ChiGuan/ Pelargonium Graveolens Oil ChiGuan
FORMULATION ADVICES / A: Weight ingredients of Phase A and mix
27.2% cleansing power well into water, filter the solution, add Capigel 98 into the solution. /
B:Add phase B into phase A/ C: add phase C to adjust pH around 6.5,
COLD
PROCESS
mix with anchor stirrer at 100 rpm till uniform. / D: add ingredients of
phase D one by one and mix with anchor stirrer at 100 rpm until More informations available on seppic.com
uniform.

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
AS40164 I NATURE PURE CONTROL FOAM
HYGIENE

A D.I. Water Up to 100%


This moisturizing cleanser combines
Glycerin 3.00%
sustainability and performances !
ORAMIX™ L30 EF 4.00% ORAMIX™ L30 EF (Sodium Lauroyl Sarcosinate)
ORAMIX™ CG 110 5.00% Respects the structure of the hair and scalp and provides abundant, light and soft foam.
PROTEOL™ OAT PF 6.00%
AMONYL™ 380 BA 6.00% ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside)
Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming
3 products because it solubilizes essential oils, fragrances and preservatives but also
boosts foam volume. Its mild cleansing effect is interesting for the formulation of
B D.I. Water 10.00% make-up removers, especially for lotions. It is particularly used to emulsify and disperse
LIPACIDE™ C8G 0.20% molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
Sodium Hydroxide (25%) 0.14%
PROTEOL ™ OAT PF (Sodium Lauroyl Oat Amino Acids)
4a It is a mild surfactant, based on oat essential amino acids, which develops good wetting
C AQUAXYL™ 1.00% properties and an abundant unctuous foam.

AMONYL™ 380 BA (Cocamidopropyl Betaine)


D Benzyl Alcohol 0.80%
Provides a fine foam that is stable over time. Ecocert approved.
Sodium Benzoate 0.50%
NOC = Citric Acid (25%) q.s. This optimized combination of surfactants allows the obtaintion of dense
96.6% and creamy foam even with only 7.8% a.m!
©UNSPLASH

NATURALITY
PROFILE LIPACIDE™ C8G (Capryloyl Glycine)
according to
ISO 16128 norm A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its
ecosystem. Ecocert approved.
Fluid Clear Solution / Challenge test: Criteria A / Packaging: Foam
Pump
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the
pH: 6.0 skin. It improves the foam quality. Its mechanism of action has been validated by
Mild & soft VISCOSITIES: 1M at RT: <50 mPa.s Brookfield LV1-6 / cosmetogenomics. Cosmos and Natrue approved.
Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.
Oil control! STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C. ADDITIONAL INGREDIENTS: Benzyl Alcohol: Microcare BNA (Thor)- Sodium Benzoate: Microcare SB(Thor)

Dense & abundant foam! FORMULATION ADVICES / Mix phase A well. Prepare phase B with
hot water and stir till solid solute well. Add phase B to phase A. Add
phase C and phase D to phase A+B and stir it till uniform.
A formula related to NATURAL COSMETICS concept.
More informations available on seppic.com
LZ203603-2009

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
AS40171 I JAPAN’EASE CLEANSING OIL
Traditional make-up remover routine
HYGIENE

All the benefits of the traditional double cleansing in


A LANOL 14M 3.00% only one simple formula!
MONTANE™ 80 VG 1.00%
LANOL 2681 20.00%
EMOGREEN™ L19 provides strong make-up removal properties while
EMOGREEN™ L19 33.45%
bringing a fresh and gliding touche. (C15-19 Alkane (Plant-based & Renewable))
Prunus Amygdalus Dulcis (Sweet 40.00%
It is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone
Almond) Oil oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a
Tocopherol 0.15% soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme
ANTILEUKINE 6™ 2.00% conditions.
Fragrance 0.40%
MONTANE™ 80 VG creates a very light emulsion when rinsing for a bare
skin feel. (Sorbitan Oleate)
Emulsifies all types of oil in combination with a hydrophilic emulsifier.

LANOL 14M gives substance and a rich feel to oil-to-milk textures.


(Myreth-3 Myristate)
This Waxy texturizing agent melts in contact with skin and brings softness and
smoothness during application.

With soft and light touch, LANOL 2681 provides a non greasy finish.
©UNSPLASH

(Coco-Caprylate/Caprate)
Emollient agent from vegetable origin. Polar ester with medium playtime. Cosmos
NOC = approved.
96.4%
Fluid / Packaging: Dropper Oily soluble, ANTILEUKINE 6™ protects and soothes the skin. (Caprylic/Capric
NATURALITY
PROFILE Challenge test: Criteria A Triglyceride and Laminaria Ochroleuca Extract)
Light skin feel according to
ISO 16128 norm
STABILITY: 1M & 3M at RT, 45°C, cycles -5°C/+40°C.
Active which regulates the inflammation mediators of the skin. It is an immediate
soother which also improves hydration and protects skin from photo-aging. Cosmos and
Natrue approved.
Refreshing and gliding
FORMULATION ADVICES: Pilot scale - 5 Kg - Propeller stirrer ADDITIONAL INGREDIENTS: Prunus Amygdalus Dulcis (Sweet Almond) Oil: LIPOVOL ALM (VANTAGE) / Tocopherol:
sensation Add LANOL 14M to EMOGREEN™ L19 and heat it to 60°C. Mix it with a propeller
TOCOPHEROL (DSM) / Fragrance: Frag61304865 (DROM).

stirrer until cooling down to room temperature. Add other ingredients and stir until the
Soft after feel mix is uniform.
A formula related to Breathtaking Rituals concept
More informations available on seppic.com
* Data provide from OECD tests, QSAR calculations, products SDS and literature.

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
AS40181 I JAPAN RITUAL HOT CLEANSING
HYGIENE

This moisturizing cleanser combines


sustainability and performances !
A Glycerin 50.00%
Butylene Glycol 34.10% ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside)
SEPILIFE™ NUDE 3.90% Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming
products because it solubilizes essential oils, fragrances and preservatives but also
boosts foam volume. Its mild cleansing effect is interesting for the formulation of
B ORAMIX™ CG 110 5.00% make-up removers, especially for lotions. It is particularly used to emulsify and disperse
EMOGREEN™ L19 5.00% molecules in cream-gels. Ecocert, Cosmos and Natrue approved.

C AQUAXYL™ 1.00% SEPILIFE™ NUDE (Sodium Acrylate/Sodium Acryloyl Dimethyl Taurate Copolymer
Pentylene Glycol 1.00% and C15-19 Alkane and Polyglyceryl-6 Laurate and Polyglycerin-6)
Pre-neutralized liquid polymeric thickener on a wide range of pH (5.5 to 12). It also
4a emulsifies and stabilizes all types of oily phases with a cold process. This polymer has
61% of natural origin content according to ISO 16128. Its improved biodegradability
makes it possible to formulate readily biodegradable finish products. SEPILIFE™ NUDE
allows formulating from sprayable to thick textures, with a quick-break effect and a nude
skin feel, for all your natural concept cosmetics.

EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable


The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE
©UNSPLASH

alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos
and Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable, it
can be used in all types of applications, even in extreme conditions (pH,
oxidizing/reducing media…).

Thick Translucent Gel / Packaging: Bottle AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
pH: 6.8 AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the
skin. It improves the foam quality. Its mechanism of action has been validated by
Warm touch! VISCOSITIES: 1M at RT: 120 000 mPa.s Brookfield LV4-6 /
Recovery at RT (after 1M at 45°C): 102 000 mPa.s Brookfield LV4-6. cosmetogenomics. Cosmos and Natrue approved.

Easy to rinse off! STABILITY: 1M at RT, 45°C, cycles -5°C/+40°C.


ADDITIONAL INGREDIENTS: Pentylene Glycol: Microcare emollient PTG (Thor)/Glycerine:Glycerine(Wilmar) /
Butylene glycol: 1,3 Butylene glycol (KH Neochem)
Deep Cleansing! FORMULATION ADVICES / Mix phase A well with deflocculator at
1000 rpm 10 minutes. Add phase B into phase A and stir till mix well.
Add phase C and to phase A+B and stir it till uniform.
A formula related to NATURAL COSMETICS concept.
More informations available on seppic.com
LZ212106 - 2105

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
AS40186 I SEA SALT SCALP CLEANSING SCRUB
Deep cleanser for oily hair or scalp
HAIR CARE Formulated with sea salts and LIPACIDE™ C8G, this
cream shampoo ensures mild massaging, deep
A Aqua/Water Up to 100% cleansing and repairing performances !
Tetrasodium Glutamate Diacetate 0.20% AMONYL™ 380 BA (Cocamidopropyl Betaine)
Guar Hydroxypropyltrimonium Chloride 0.10% Provides a fine foam that is stable over time. Ecocert approved.

2 Sodium Laureth Sulfate 70% 19.00% PROTEOL™ APL EF (Sodium Cocoyl Apple Amino Acids)
Fruit surfactant, derived from essential amino-acids present in apple juice, for a gentle approach: unctuous
foam, extremely mild to the skin and the eyes and also respectful of the environment.
B AMONYL™ 380 BA 6.00%
PROTEOL™ APL EF 5.00% MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)
MONTANOV™ L 1.00%
Glucolipid emulsifier in harmony with nature. MONTANOV L is well-suited to formulate different textures (from
sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions,
EMOGREEN™ L19 2.00% and has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration
(efficacy proven in vivo).
LIPACIDE™ C8G 0.20%
Cocamide MIPA EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable
3.00%
The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to
C Sodium Chloride 25.00% silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding
touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in extreme
Sodium Chloride* 15.00% conditions (pH, oxidizing/reducing media…).

SEL GRAIN™ 4.00% LIPACIDE™ C8G (Capryloyl Glycine)


A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. It also
XYLISHINE™ 2.00% protects cosmetic products by increasing the microbiological stability of formulas with a low preservative
content. Ecocert approved.
NOC= Polyquaternium-7 0.70%
73,5% Phenoxyethanol and Ethylhexylglycerin 0.50% SEL GRAIN™ exfoliates and revitalizes the skin while also increasing metabolism and
©UNSPLASH

Sodium Benzoate 0.50% circulation of the scalp. (Sea salt)


NATURALITY Its a Sea Salt, used in massage applications on the body and to help reduce stress.
PROFILE
according to Fragrance 0.50%
ISO 16 128 norm
Shampoo conditioning efficacy is ensured by PQ-7, while XYLISHINE™ (Xylitylglucoside
and Anhydroxylitol and Maltitol and Xylitol and Pelvetia Canaliculata Extract) moisturizes and repairs
White thick cream with coarse salts / Packaging: Jar hair: it helps maintain the deep hydration of the hair and protect the fiber.
As a result, hair fiber is smoothed and frizz effect limited.
Deep cleansing hair & scalp pH: 5.5 / VISCOSITIES: 1M at RT: 150,000 mPa.s Brookfield LV4-6
Recovery at RT (after 1M at 45°C): 150,000 mPa.s Brookfield LV4-6.
STABILITY: 1M at RT, 45°C and -18°C.

Repair damaged scalp ADDITIONAL INGREDIENTS: Sodium Laureth Sulfate : TEXAPON ALES 3-70A (BASF) / Guar
Hydroxypropyltrimonium Chloride: Rhodicare C-500 (Rhodia)/ Tetrasodium Glutamate Diacetate: Dissolvine GL-47S ()
/ Cocamide MIPA: Mackamide CPA Flake (Solvay) / Phenoxyethanol and Ethylhexylglycerin Microcare PEHG(Thor)/
FORMULATION ADVICES: Laboratory scale - 300 g - Anchor
Sodium Benzoate:Microcare SB (Thor)/ Sodium Chloride: Sodium Chloride (Guoyao) / Sodium Chloride*: Crude Salt
Add EDTA, guar to cold water and disperse them well. Add SLES to dissolve (Zhongyan)
uniformly. Heat up to 75-80℃ while stirring at 300 rpm. Then add phase B to phase
Reduce the head itching A, stir it uniformly at 75-80℃. Cool down to 50℃ slowly, stir it for 15 min, then cool
down to 45℃. Add phase C one by one, stir it uniformly. Adjust to pH 5.5 if needed.
More informations available on seppic.com
LZ213601-2109

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40189 I “CLEAN” DOUBLE CLEANSING BUTTER
HYGIENE

A melting balm texture able to remove even


A Aqua/Water Up to 100% waterproof make up
ORAMIX™CG 110 5.00%
Soft and non dry after feel after rinse off!
B EMOGREEN™ L15 20.00% ORAMIX™ CG 110 (Caprylyl/ Capryl Glucoside)
EMOGREEN™ L19 20.00% Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming products because
it solubilizes essential oils, fragrances and preservatives but also boosts foam volume. Its mild cleansing
MONTANOV™ S 5.00% effect is interesting for the formulation of make-up removers, especially for lotions. It is particularly used
3 MONTANOV™ L 5.00% to emulsify and disperse molecules in cream-gels. Ecocert, Cosmos and Natrue approved.
C10-18 Triglyceride 10.00%
EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))
Behenate Glycerol 8.00% EMOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile
Polyethylene 5.00% silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue.
Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used
Beeswax 8.00%
4a Hydroxyacetophenone 0.35%
in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).

Ethylhexylglycerin 0.50% EMOGREEN™ L19 (IC15-19 Alkane renewable)


EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone
oils. This high purity vegetable alkane is conformed to Cosmos and Natrue (certification on going). It give
a fresh and gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications,
C Fragrance 0.30% even in extreme conditions (ph, oxidizing/reducing media…)
NOC =
MONTANOV™ S
93.9% (Cocoglucoside and Coconut Alcohol)
Glucolipid co-emulsifier in harmony with nature. The combination with another emulsifier facilitates the
©UNSPLASH

NATURALITY formulation of stable sun care products in terms of texture, dispersion of sunscreens, protection factor,
PROFILE etc. Ecocert, Cosmos and Natrue approved.
according to
ISO 16128 norm
Melting Balm / Packaging: Jar MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)
pH: 5.0 Glucolipid emulsifier in harmony with nature. MONTANOV™ L is well-suited to formulate different
textures (from sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It
VISCOSITIES: 1M at RT: NA stabilizes emulsions, and has a strong moisturizing power since it promotes liquid crystals which prevent
Recovery at RT (after 1M at 45°C): NA the skin from dehydration (efficacy proven in vivo).
A double action cleansing STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
ADDITIONAL INGREDIENTS: Polyethylene: Performalene 400 (NEW PHASE)/ Beeswax: Beeswax(KAHL)/C10-18
Japanese inspired - non drying Triglyceride: DUB CIRE H1 (DUBIOS) /Behenate Glycerol : DUB BG (DUBOIS)/Hydroxyacetophenone: Microcare
Antioxidant HAP (Thor)/Ethylhexylglycerin: MIcrocare Emollient EHG/ Fragrance: 61304865 (DROM)

Excellent cleaning properties FORMULATION ADVICES /Weigh phase B in a 400ml beaker, heat it up to 85℃, stir it
until phase B is totally melted to liquid form. Stop heating, add phase A into phase B
under medium agitation, cool down to 60℃, add phase C, mix it uniformly, pour the A formula related to NATURAL COSMETICS concept.
Excellent rinse off mixture to the packaging.
More informations available on seppic.com
LZ213603-2110

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and shouldnot be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All PPIC according to its own described methods and processes. SEPPIC however does not assume any liability or risks involved in the use of its productsfor the preparation and the assessment of
CP-CP22065
the hereinabove formulation since the condition of use are Discover
beyond its control. SEPPIC ourmust
customer Formulation Universes
insure that the duplication of theIn Cos Korea
hereinabove Mayis2022
formulation not infringing any intellectual property rights and that it
complies with any regulatory status.
Maskmania

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 16


Maskmania the rise a new formats KOREA - Pad Mania

Quick skin care


Multifunctional
Applicable to creams and
essences
USA - Exfoliate & nourish

Use of PHA (less irritating)


Mud masks EUROPE - Sustainable above all Scinic Super moist cream
Ceramides essence Pad
Nourishing/ Balm textures Solid format CHINA - New Formats
No sheet => pollution
Barrier repair/ dermocosmetic Evolution towards new JAPAN - Conservative
Sensorial benefits forms
Focus on moisture Anti aging/ Whitening
Mud masks for oily skins Pore refining
Sheet masks
fermented actives

DRUNK ELEPHANT
F-Balm Electrolyte Water facial

Chioture Fermented mask Thin


layer for rinse off free mask
FLORENCE by MILLS
Moisture Mask Pearls
Hadabisei super penetration
3D aging care

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 17


Masks rebirth

Solid format DIY Hypercustomization


Easyness of use, more
Fun but also allows to
stable
keep some fragile Masks for different
microbiologically.
ingredients freshness. parts of the body or
Interesting for
Add just before even combined with
nourishing functions
application apps and specific tools
and fun application
Consumer involvement

Dr JART Shakking rubber SHISEIDO WASO Sakura Moshi FOREO Connected Mask COSNA YA PACK
Watermelon brightening face elastic shot Inspired by Moshi cake with Based on the principals of Outdoor mask pack
mask - MILK Fun and antiaging mask to gooey sensation DIY concept thermotherapy Integrated beauty routine
Clay mask base protect skin elasticity outside home.

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022


AS40042 I ROSE SLEEPING PACK
Moisture treatment in a jar!
SKIN CARE

A Caprylic Capric Triglyceride 1.00%


A jar full of moisture without sheet for à
Dimethicone 0.50% sustainable touc!
SIMULGEL™ INS 100 2.00% Elegant and fresh skin feel!
SEPIPLUS™ 400 1.00%

B Aqua/Water Up to 100%
Butylene Glycol 4.00% SIMULGEL™ INS 100 (Hydroethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer and Isohexadecane and Polysorbate 60)

Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It provides also excellent oil stabilizing effect. Versatile
SOLAGUM™ AX 0.10% and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to very thick formulas. It creates melting
textures with a fresh skin feel.

SEPIPLUS™ 400 (Polyacrylate-13 and Polyisobutene and Polysorbate 20)


C AQUAXYL™ 1.00% Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a slippery silicone-like feel
and can be used to reduce the use of silicone in formulas. Due to this benefit, which makes it easy to spread, along with its perfect
SEPICALM™ VG WP 1.00% compatibility with various sunscreen coatings, it is ideal for sun care products.
OLIGOGELINE SPE 1.50% SOLAGUM™ AX (Acacia Senegal Gum & Xanthan Gum)
Propylene/ Diazolidinyl Urea/ Trimethyl Iodo 0.70% Smart combination of natural thickening polymers. SOLAGUM™ AX also displays emulsifying properties that allow to stabilize up to
15% of oils. It also offer good compatibility with hydrophilic pigments and inorganic sunscreens allowing to create all kinf od
propynyl Butyl Ester formulation.
Can be used with hot or cold process. Ecocert and Natrue approved, it is the perfect ally for all natural formulation.
Fragrance 0.05% Readily biodegradable : >90% in 28 days* with * : OECD 301A method

AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)

AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted,
D Colorant 0.01% water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism
of action has been validated by cosmetogenomics. Cosmos and Natrue approved.

SEPICALM™ VG WP (Sodium Palmitoyl Proline and Nymphea Alba Flower Extract)

A successful marriage between palmitoylproline and water lily flower extract reaching a unique lightening and soothing effect:
thanks to an action towards both a modulation of inflammatory mediators and a reduction of genetic expression of tyrosinase (key
enzyme of pigmentation), SEPICALM™ VG WP decreases cutaneous pigmentation induced by stress or aging process (in vitro and
Pink cream gel/ Packaging: Jar in vivo proven efficacy).
pH: 5.6 / VISCOSITIES: 1M at RT: 41 000 mPa.s Brookfield S4S6/
OLIGOGELINE SPE (Chondrus Crispus Extract)
Recovery at RT (after 1M at 45°C): 42 000 mPa.s Brookfield S4S6. OLIGOGELINE SPE works as a second skin, forming a natural non occlusive shield to protect from pollution effects. 78% of
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C. microparticles are removed. Protection is about 43% versus non treated skin. Results are significant versus placebo.

A mask without sheet


Melting texture with fresh and FORMULATION ADVICES / A: Weight phase A/ B: Weight phase B, stir
elegant skin feel until uniform/ Add phase B to phase À directly, start homogenization at
4000 rpm for 4 mn/ Change to stir the mixture with anchor at 80 rpm
and add phase C one by one, mix until uniform./ Add phase D and mix
Filled with moisture until color is uniform.
COLD
PROCESS ADDITIONAL INGREDIENTS: Caprilic capric triglycerides Myritol 318 (BASF) / Dimethicone DC 200 350 cst (DOW CORNING)/ Propylene/ Diazolidinyl
Urea/ Trimethamine Iodopropynyl butyl ester - Liquid Germall Plus (ASHALAND)/ Fragrance - 276274 (DROM)/ Colorant Red 33 ( CI17200)

More informations available on seppic.com


All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40108A I HEALTHY GLOW SKIN MASK
SKIN CARE

A Water Up to 100%
SEPIMAXTM ZEN 0.25% Supple & Playful texture thanks to the
association of SEPIMAX ZEN™ and
B AQUAXYL™ 0.50% OLIGOGELINE.
OLIGOGELINE SPE 0.50% Pore Minimizing effect!
TALADVANCE 0.20%

C Water 5.00% SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)


Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior.
1,2 Hexanediol 0.60% Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming
Glycerin 2.00% formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels
and emulsions with any kind of active ingredients and to achieve ZEN.
CERAMOSIDES™ HP 0.08%
AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
D Fragrance 0.01% reserves are instantly boosted, water circulation is improved in all skin layers and water loss is reduced (in
vitro and in vivo tests prove this efficacy). It’s mechanism of action has been validated by
SIMULSOL 1293 0.03% cosmetogenomics. Ecocert and Natrue approved.
Water 2.00% CERAMOSIDES™ HP (Glycosphingolipids & Glycolipids)
The essence of perfect skin. CERAMOSIDES™ HP are an original combination (patented) of natural
CERAMIDES and OMEGA which protect the skin from the loss of elasticity, one of the primary causes of
E Butylene Glycol 3.00% enlarged pores with age. After 56 days of treatment, the skin roughness is smoothed (-73% skin
Hydroxyacetophenone 0.40% roughness) and the pores are visibly smaller.
©UNSPLASH

OLIGOGELINE SPE™ (Chondrus Crispus Extract)


Second skin ingredient: binds carrageenans and skin proteins, moisturizing skin and reduce TEWL,
re-mineralizing because of high calcium content (antiaging & slimming).
Transparent solution/ Packaging: Sheet mask
NOC=
pH: 5.7 / VISCOSITIES: 1M at RT: 700 mPa.s Brookfield LVDV1 S61/V6 /
98,2% Recovery at RT (after 1M at 45°C): 450 mPa.s Brookfield LVDV1 S61/V6.
SIMULSOL™ 1293
Solubilizer
(PEG-40 Hydrogenated Castor Oil)

NATURALITY STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.


PROFILE Turbidity 15 NTU (Turbidimeter2100Q)
Supple and soft skin feel according to
ISO 16 128 norm

FORMULATION ADVICES / Add water into a 400 ml beaker, start


Healthy pink glow agitation at 400 rpm, add SepimaxTM ZEN slowly, mix the mixture ADDITIONAL INGREDIENTS: Schülke & Mayr 1,2-Hexanediol: Hexanediol (Schülke & Mayr)/ Hydroxyacetophenone:
about 30 minutes until the batch is totally clear and uniform. Add the (Schülke & Mayr)/ Fragrance: Fragrance 86318952 (DROM)
ingredients in phase B one by one. Premix phase C in a 50 ml beaker
Moisturization and heat to 70°C until totally clear, and add it into the main beaker.
Premix phase D, add it into the main beaker. Premix phase E COLD
Hydroxyacetophenone till it dissolve, Add phase E to main beaker. PROCESS

More informations available on seppic.com


All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40142 I CHRONOBIO’ SLEEPING MASK
Resynch your natural rythm! Chronobio’ sleeping mask combines 3 active
SKIN CARE
ingredients with scientifically proven efficacy in
well-aging, skin radiance and pollution protection.
The new evening face massage ritual for a perfect complexion!
A Aqua/Water Up to 100%
Glycerin 5.00% The combination of functional ingredients creates this fluid, gliding and light
texture adapted to the roll-on tube packaging, ideal for a massage ritual!
B SEPINOV™ EMT 10 1.20%
SEPIMAX ZEN™ 0.30% FLUIDIFEEL™ EASY (Lauryl Glucoside and Myristyl Glucoside and Polyglyceryl-6 Laurate) gives
light and fluid texture, adapted to roll-on tube packaging.
3 Sustainable O/W emulsifier processable at room temperature.
C FLUIDIFEEL™ EASY 1.50% FLUIDANOV™ 20X (Octyldodecanol and Octyldodecyl Xyloside) is a co-emulsifier which
FLUIDANOV™ 20X 0.50% contributes to stabilize the emulsions and improves its skin feel.
EMOGREEN™ L19 6.00% EMOGREEN™ L19 (C15-19 Alkane - Plant-based & Renewable), together with LANOL
LANOL 2681 4.00% 2681 (Coco-Caprylate/Caprate), gives a fresh and gliding touch with a soft afterfeel.
4a SEPINOV™ EMT 10 (Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer)
imparts satiny and fresh skin feel. It stabilizes the formula supported by
D TALADVANCE™ 2.00%
ASPAR’AGE™ 1.00% SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6).
SEPITONIC™ M3.0 1.00%
4b TALADVANCE™ (Glycerin - Aqua/Water - Centella Asiatica Leaf Extract) regulates the
cellular cycle in the epidermis, increases fibroblast functionality & protects
E Phenoxyethanol - Ethylhexylglycerin 1.00% the dermis. It brings long term radiance and shows a powerful soothing
Phenylpropanol -Propanediol - Caprylyl activity (with inhibition of IL-1 (-76%) & of IL-8 (-34%)).
©UNSPLASH

Glycol - Tocopherol 0.50%


ASPAR’AGE™ (Aqua/Water and Propanediol and Asparagosis Armata Extract), regulates the
effect of "Senescent Messaging Secretome" in order to reduce the
NOC=
contagious aging on young cells.
97.0%
SEPITONIC™ M3.0 (Magnesium Aspartate and Zinc Gluconate and Copper Gluconat) is a cell
NATURALITY
chrono-energizing and anti-free radical agent.
Beige fluid lotion / Packaging: Roll-on tube / Tube
Perfect complexion
PROFILE
according to Increasing the cutaneous oxygenation (in vivo proven), SEPITONIC™ M3.0 is active at any
ISO 16128 norm pH: 6,0 / VISCOSITIES: 7J at RT: 15 800 mPa.s Brookfield LV3-6 / age for vitality, skin aging prevention and protection against stress and pollution.
STABILITY: 1M at RT, 45°C
Healthy aging
FORMULATION ADVICES: Laboratory scale - 200 g - Silverson
Mix phase A ingredients and stir at 50 rpm. Mix phase C
Ritual benefits ingredients until it gets clear then add phase B into phase C
and mix at 50 rpm. Add phase (B+C) into phase A then
ADDITIONAL INGREDIENTS: Phenoxyethanol - Ethylhexylglycerin - EUXYL PE 9010 (SCHÜLKE & MAYR) / Phenylpropanol
-Propanediol - Caprylyl Glycol - Tocopherol - SENSIVA PA 40 (SCHÜLKE & MAYR)
COLD
homogenize at 4000 rpm for 4 mins. Add phase D and mix. PROCESS
Add phase E ingredients one by one and mix. A formula related to BEAUTY TRILOGY concept.
* Data provide from OECD tests, QSAR calculations, products SDS and literature. More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40177 I OIL CONTROL MASK
SKIN CARE

A MONTANOV™ 202 0.30%


LANOL™ 2681 1.00% Long lasting fresh skin, avoid shiny face.
EMOGREEN™ L19 2.00% Stable low viscosity!
B SEPINOV™ WEO 0.55%
SEPIMAX™ ZEN 0.08% MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )

Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining
skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to
C D.I. Water 20.00% keep skin moisturized. Ecocert and Natrue approved.

Glycerin 3.00% SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)


Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high associative behavior.
Stable from pH 2 to 8, it enables the creation of formulas with a specific skin feeling, included foaming
D Water 5.00% formulas: rich, velvety and elegant. It is now possible to formulate transparent aqueous gels, cream-gels
and emulsions with any kind of active ingredients and to achieve ZEN.
Sodium Hydroxide(25%) 0.16%
0.20% AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)
LIPACIDE™ C8G AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).

EMOGREEN™ L19
D.I. Water Up to 100%
(C15-19 Alkane) Plant based and renewable
E The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to
AQUAXYL™ 0.50% silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and
gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in
1,2 Hexanediol 0.40% extreme conditions (pH, oxidizing/reducing media…).
Hydroxyacetophenone 0.40%
©UNSPLASH

SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )


Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with Ethylene
Oxide free formulas. It has good resistance to electrolytes and imparts a light, satin-like skin feel.

NOC= White lotion / Packaging: sheet mask LIPACIDE™ C8G (Capryloyl Glycine)
99,3% pH: 5.4 / VISCOSITIES: 1M at RT: 1000 mPa.s Brookfield LVDV1 S61V6 / A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem.
Ecocert approved.
Recovery at RT (after 1M at 45°C): 1200 mPa.s Brookfield LVDV1 S61V6
STABILITY: M3 at RT, 45°C, cycles -5°C/+40°C.
Smooth & non sticky
NATURALITY LANOL™ 2681 (Coco-Caprylate/Caprate)
PROFILE
according to Centrifugation: Passed 3000 rpm, 30 rpm Emollient agent from vegetable origin. Polar ester with medium playtime. Cosmos approved.
ISO 16 128 norm

Quick drying with comfort FORMULATION ADVICES / Weight phase A and heat to 85℃. Disperse ADDITIONAL INGREDIENTS: 1,2 Hexanediol : Effsin HD(Schülke & Mayr)- Hydroxyacetophenone:Effsin HDASchülke
phase B into heated phase A. Add the heated -80℃ phase C into phase A+B, & Mayr)
homogenize it at 4000 rpm for 4 minutes. Mix phaseD with 70~80℃ water
Oil Control and stir until lipacide C8G dissolve completely. Add phase D & E into the
emulsion at 45℃ and cool down the system under anchor stirring at 200 rpm
for 10 min.

LZ210102-2104
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40178 I GREEK YOGURT FACE MASK
SKIN CARE

A MONTANOV™ 202 3.00%


EMOGREEN™ L19 4.00% Comfortable skin feeling provided by
LANOL P ECAILLES 1.00%
Squalane 1.20% MONTANOV™ 202 associated with SEPINOV™ WEO!
Butyrospermum Parkii (Shea Butter) 0.70%
Oenothera Biennis (Evening Primrose) Oil 3.00%
Promotes healthy skin microbiota thanks to EQUIBIOME™!
Prunus Amygdalus Dulcis (Sweet Almond) Oil 1.00%

MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )
B Pure Water Up to 100.00%
Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining
Sodium Hyaluronate 0.05%
skin moisturization over time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to
Glycerin 2.00% keep skin moisturized. Ecocert and Natrue approved.

AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )


C SEPINOV™ WEO 0.60%
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).

D Pure Water 15.00% EMOGREEN™ L19 (C15-19 Alkane) Plant based and renewable
Glycerin 2.00%
The EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to
Sodium Polyacrylate Starch 0.70% silicone oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and
gliding touch, with a soft afterfeel. Inert and stable, it can be used in all types of applications, even in
extreme conditions (pH, oxidizing/reducing media…).
E AQUAXYL™ 1.50% SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )
SEPICALM™ VG WP 1.00% Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with Ethylene
EQUIBIOME™ 1.00% Oxide free formulas. It has good resistance to electrolytes and imparts a light, satin-like skin feel.
©UNSPLASH

Hydroxyacetophenone 0.50% EQUIBIOME™ (Propylene glycol, water, Arctium Lappa root extract)
1,2-Hexanediol 0.50%
Sourced at the core of the roots of Great Burdock using aeroponic culture*, EQUIBIOME™ offers a
Tocopherol 0.10% unique composition with higher content of rare root metabolites than classical root extracts.
NOC=
SEPICALM™ VG WP (Sodium Palmitoylproline and Nymphea Alba Flower Extract)
96,8% A successful marriage between palmitoylproline and water lily flower extract reaching a unique lightening
and soothing effect: thanks to an action towards both a modulation of inflammatory mediators and a
White Thick Cream / Packaging: Jar
Unctuous Texture NATURALITY
PROFILE
reduction of genetic expression of tyrosinase (key enzyme of pigmentation), SEPICALM™ VG WP
decreases cutaneous pigmentation induced by stress or aging process (in vitro and in vivo proven
according to pH: 6.2/ VISCOSITIES: 1M at RT: 105 000 mPa.s Brookfield LVT94-6 /
ISO 16 128 norm efficacy).
Favorises healthy Microbiota Recovery at RT (after 1M at 45°C): 85 000 mPa.s Brookfield LVT94-6.
STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C. LANOL P ECAILLES(Glycol Palmitate)
Texturing agent which improves the consistency of the formula and brings soft skin feel, without any
Soft after feel soaping effect.
PROCEDURE ADVICES / Weigh phase A and B and heat them to 85°C. Add phase
C to A, and then add phase B to phase A+C, homogenize it by Silverson rotor-stator ADDITIONAL INGREDIENTS: Butyrospermum Parkii (Shea Butter): Lipex shea( AAK)/ Tocopherol: (DSM)/
4000 rpm for 4 minutes. Cool down under anchor stirring 100 rpm without water Squalane:PRIPURE 3759 (CRODA)/ Oenothera Biennis (Evening Primrose) Oil:Evening Primrose Oil (local) /Prunus
Amygdalus Dulcis (Sweet Almond) Oil: Lipovol ALM-N(Vatange)/Sodium Hyaluronate(Freda)/Sodium Polyacrylate
bath for 10 minutes and followed with water bath cooling for another 10 minutes. Starch: Makimousse 25(KOBO)/Hydroxyacetophenone:Microcare Antioxidant HAP(Thor) / 1,2-Hexanediol: Effusin HA
Phase D: Pre-disperse Sodium Polyacrylate Starch into glycerin, then add water into (Ashland)
LZ211303 - 2104 it, and stir it till uniform. Add phase D and E one by one into the emulsion around More informations available on seppic.com
50°C and stir till uniform. Stop stirring at 30°C.
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40179 I MUDDY MASK
A pure moment of care for oily skin
SKIN CARE Strong purifying and oil control efficacy thanks to
Kaolin and Capryloyl glycine.
A D.I. Water Up to 100% The classical mud mask !
Glycerin 4.00%
Kaolin 19.00% LIPACIDE™ C8G purifies and treats oily skins.
CI77891 1.00% (Capryloyl Glycine)
CI77288 0.30% A glycine biovector and skin acidifying agent, it protects the skin and helps maintain its ecosystem. It also
protects cosmetic products by increasing the microbiological stability of formulas with a low preservative
CI77492 0.04% content.
CI77499 0.08%
Tromethamine 0.68% SENSANOV™ WR & MONTANOV™ L, form a nice soft cream, non drying
LIPACIDE™ C8G 0.80% for the skin.
PROTEOL™ OAT PF 0.50%
SOLAGUM™ AX 0.20% SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols)
Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of
lightness followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally
B MONTANOV™ L 2.00% SENSANOV™ WR emulsions leaves the skin supple with a long lasting sensation of comfort.
SENSANOV™ WR 1.00%
EMOGREEN™ L19 3.00% MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside )
Caprylic Capric Triglyceride 2.00% Glucolipid emulsifier in harmony with nature. it is well-suited to formulate different textures no
matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and has a strong
Behenyl Alcohol 3.00% moisturizing power since it promotes liquid crystals which prevent the skin from dehydration .

C SEPIGEL 305™ 1.50% EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable )
It is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This
D Silica 1.00% high purity vegetable alkane is conformed to Cosmos and Natrue. Beyond the lightweight and non-greasy
Ethylhexylglycerin 0.40% skin feel, it gives a powdery finish.
Hydroxyacetophenone 0.15%
Caprylyl Glycol 0.10% PROTEOL™ OAT PF (Sodium Lauroyl Oat Amino Acids)
©UNSPLASH
@taylormae

Surfactant based on oat essential amino acids. It is very useful as a pigment-dispersing agent in make-up
Perfume 0.10% formulas. It is a mild surfactant which develops good wetting properties and an abundant unctuous foam
NOC= without any drying effect on the skin. Thanks to its high tolerance, PROTEOL™ OAT is recommended for
sensitive skin.
93,9%
Green cream/ Packaging: Jar SOLAGUM™ AX (Acacia Senegal Gum and Xanthan Gum)
NATURALITY Smart combination of natural thickening polymers. It allows to formulate non-stringy translucent gels
Smooth texture PROFILE
according to
ISO 16128 norm
pH: 6 with intermediate viscosity. SOLAGUM™ AX also offers better stabilizing effect than xanthan gum while
ensuring easy spreading and film forming effect. Ecocert and Natrue approved, it is the perfect ally for all
VISCOSITIES: at RT: 73000 mPa.s Brookfield L4V6. natural formulation.
Recovery at RT (after 1M at 45°C): 73000 mPa.s Brookfield L4V6..
Fresh skin feel after use STABILITY: 1M at RT, 45°C, cycles -5°C / + 40°C. SEPIGEL 305™ (Polyacrylamide and C13-14 Isoparaffin and Laureth-7)
Liquid polymer, famous worldwide, easy to use. It provides a creamy skin feel and allows the formulation
FORMULATION ADVICE: Laboratory scale - 200 g - Silverson & Anchor of gels and cream gels even in cold process.
Skin purification Pre-mix the 6 powders in phase A by a powder machine, and then add it in water
ADDITIONAL INGREDIENTS: Perfume - Frag435243 (DROM) / Glycerin - Pricerine 9091 (KARRY) / Ethylhexylglycerin-
phase A under stirring until uniform. Weigh phase A & B, heat both phases to 80°C. Microcare® Emollient EHG (Thor) / Hydroxyacetophenone -Microcare Antioxidant HAP(Thor) / Chlorphenesin-Microcare® CPH(P)
Pre-disperse phase C in phase B, add phase A into phase B+C, homogenize it with (Thor) / Kaolin - Supreme (MERCURY) / Silica - SILNOS130 (ABC NANOTECH) /CI CI77289- UNIPURE GREEN LC 790 CF
Silverson 4000 rpm for 4 min. Stir the emulsion with anchor stirrer at 150 rpm 10 min (SENSIENT)/CI77891-Unipure White LC 987 PHY (SENSIENT)
without water bath and another 10 min with water bath. Add phase D one by one into More informations available on seppic.com
* Data provide from OECD tests, QSAR calculations, products SDS and literature. the emulsion and stir it under anchor stirring at 150 rpm until uniform.

All information contained herein is intended merely to demonstrate the utility of Seppic products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by Seppic according to its own described methods and processes. Seppic however
does not assume any liability or risks involved in the useCP-CP22065
of its products for theDiscover ourtheFormulation
preparation and assessment of theUniverses In Cos Korea
hereinabove formulation since theMay 2022
condition of use are beyond its control. Seppic customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40187 I RADIANT PURE MASK
SKIN CARE

A Pure Water Up to 100%


Carbomer 0.05% SEPIWHITE™ MSH allows to make a crystal
clear gel mask which brings your skin radiance.
B SEPIMAX™ ZEN 0.10%

C Tromethamine 0.05% SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)


Powder polymer with a MAXIMUM resistance to electrolytes thanks to its high
D Pure Water 30.00% associative behavior. Stable from pH 2 to 8, it enables the creation of formulas with a
specific skin feeling, included foaming formulas: rich, velvety and elegant. It is now
Hydroxyethylcellulose 0.10% possible to formulate transparent aqueous gels, cream-gels and emulsions with any
kind of active ingredients and to achieve ZEN.
E SEPIWHITE™ MSH 0.20%
Tromethamine 0.09% SEPIWHITE™ MSH (Undecylenoyl Phenylalanine)
A lightening active ingredient acting through an original pathway. Alpha MSH antagonist
(“Melanotropin”), it decreases effectively the melanic pigments by respecting the
F AQUAXYL™ 0.50%
cutaneous integrity. Ecocert approved.
Butylene Glycol 3.00%
Hydroxyacetophenone 0.20% AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
1,2-Hexanediol 0.40% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the
Ethylhexylglycerin 0.10% skin. Water reserves are instantly boosted, water circulation is improved in all skin layers
and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism
of action has been validated by cosmetogenomics. Cosmos and Natrue approved.
©UNSPLASH

G ORAMIX™ CG 110 0.10%


ORAMIX™ CG 110 (Caprylyl / Capryl Glucoside)
Non-ionic surfactant from vegetable origin. It is an ideal solubilizing agent for foaming
products because it solubilizes essential oils, fragrances and preservatives. Ecocert,
NOC=
Cosmos and Natrue approved.
99,3%
Transparent Solution /Packaging: Mask
Skin radiance NATURALITY
PROFILE
according to
pH: 6.8/ VISCOSITIES: 1M at RT: 500 mPa.s Brookfield S61-6 /
Recovery at RT (after 1M at 45°C): 400 mPa.s Brookfield S61-6 /
ISO 16 128 norm
whitening STABILITY: Stable M1 at RT, 45°C, 4°C and cycles -5°C/+40°C.

Crystal clear PROCEDURE ADVICES / Add carbomer to water under Vortex and stir at 600 rpm ADDITIONAL INGREDIENTS: Carbomer: Carbopol 981(Lubrizol)/ Hydroxyethylcellulose: Natrosol 250 HHR PC
till uniform. Then add Sepimax ZEN and stir till uniform. Then add phase C, and stir (Ashland)/Tromethamine: Tromethamine(Angus)/ Hydroxyacetophenone : Microcare® Antioxidant HAP (THOR) /
1,2-Hexanediol: Microcare® Emollient HXD (THOR) /Ethylhexylglycerin : Microcare® Emollient EHG (THOR) /
with anchor at 200 rpm till uniform. DIsperse Hydroxyethylcellulose in cold water
and stir while heat to 80℃ till uniform in another beaker, then add phase E to phase
D and stir till uniform, add phase F and G to phase D+E when cooling down at 50℃
while stirring at 400 rpm. Add phase D+E+F+G to phase A+B+C and stir with anchor
LZ213311 - 2108 at 200 rpm till uniform.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
SEPIMAX ZEN™

the Mask Sensorial


Kick!

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 26


AS40190A I SEPIMAX ZEN™ Sensorial Mask Kit
0.2% Hydroxyethyl Cellulose
SKIN CARE

A Water Up to 100% How SEPIMAX ZEN can be used as sensorial


Hydroxyethyl Cellulose 0.20% enhancer in sheet masks
Butanediol 3.00% for additional Moisture & Confort sensations!

B Hydroxyacetophenone 0.30%
Ethylhexylglycerin 0.15%

Hanging test : the more the mask hangs the best it is for
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 5.6 / VISCOSITIES: 1M at RT: 125 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 70 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant
COLD HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150~300 rpm until homogeneous. Add phase B to A under defloculator .
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40190B I SEPIMAX ZEN™ Sensorial Mask Kit
0.2% Hydroxyethyl Cellulose + 0.1% SEPIMAX ZEN™
SKIN CARE

A Water Up to 100% How SEPIMAX ZEN™ can be used as sensorial


Hydroxyethyl Cellulose 0.20% enhancer in sheet masks
Butanediol 3.00%
SEPIMAX ZEN™ 0.10%
for additional Moisture & Confort sensations!

B Hydroxyacetophenone 0.30%
SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)
Ethylhexylglycerin 0.15% Pre-neutralized powder polymeric thickener with a MAXIMUM
resistance to electrolytes thanks to its high associative behavior.
Efficient on a wide range of pH from 3 to 8, it is able to formulate
transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
Hanging test : the more the mask hangs the best it is for
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 5.6 / VISCOSITIES: 1M at RT: 925 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 560 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant
COLD HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150~300 rpm until homogeneous. Add phase B to A under defloculator .
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40190C I SEPIMAX ZEN™ Sensorial Mask Kit
0.1% Xanthan Gum
SKIN CARE

A Water Up to 100% How SEPIMAX ZEN can be used as sensorial


Xanthan Gum 0.10% enhancer in sheet masks
Butanediol 3.00%
for additional Moisture & Confort sensations!
B Hydroxyacetophenone 0.30%
Ethylhexylglycerin 0.15%

Hanging test : the more the mask hangs the best it is for
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 5.36 / VISCOSITIES: 1M at RT: 200 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 120 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
ADDITIONAL INGREDIENTS: KELTROL CG Xanthan Gum (CP KELCO ) / MICROCARE Antioxydant HAP
COLD Hydroxyacetophenone (THOR) / Butanediol / MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150 rpm until homogeneous. Add phase B to A under defloculator .
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40190D I SEPIMAX ZEN™ Sensorial Mask Kit
0.1% Xanthan Gum + 0.1% SEPIMAX ZEN™
SKIN CARE

A Water Up to 100% How SEPIMAX ZEN™ can be used as sensorial


Xanthan Gum 0.10% enhancer in sheet masks
Butanediol 3.00% for additional Moisture & Confort sensations!
SEPIMAX ZEN™ 0.10%

B Hydroxyacetophenone 0.30% SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)


Ethylhexylglycerin 0.15% Pre-neutralized powder polymeric thickener with a MAXIMUM
resistance to electrolytes thanks to its high associative behavior.
Efficient on a wide range of pH from 3 to 8, it is able to formulate
Hanging test : the more the mask hangs the best it is for transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 5.36 / VISCOSITIES: 1M at RT: 1300 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 700 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
COLD
ADDITIONAL INGREDIENTS: NATROSOL 250 HHR hydroxyethyl cellulose (ASHLAND ) / MICROCARE Antioxydant
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150 rpm until homogeneous. Add phase B to A under defloculator
HAP Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
.
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40190E I SEPIMAX ZEN™ Sensorial Mask Kit
0.02% Carbomer
SKIN CARE

A Water Up to 100%
Carbomer 0.02% How SEPIMAX ZEN can be used as sensorial
Butanediol 3.00% enhancer in sheet masks
Tromethamine 0.01% for additional Moisture & Confort sensations!
B Hydroxyacetophenone 0.30%
Ethylhexylglycerin 0.15%

Hanging test : the more the mask hangs the best it is for
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 6.5 / VISCOSITIES: 1M at RT: 900 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 400 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
ADDITIONAL INGREDIENTS: CARBOPOL 980 Carbomer (Lubrizol) / MICROCARE Antioxydant HAP
COLD Hydroxyacetophenone (THOR) / Butanediol / MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150~300 rpm until homogeneous. Add phase B to A under defloculator .
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40190F I SEPIMAX ZEN™ Sensorial Mask Kit
0.02% Carbomer + 0.1% SEPIMAX ZEN™
SKIN CARE

A Water Up to 100%
Carbomer 0.02% How SEPIMAX ZEN™ can be used as sensorial
Tromethamine 0.01% enhancer in sheet masks
Butanediol 3.00% for additional Moisture & Confort sensations!
SEPIMAX ZEN™ 0.10%

B Hydroxyacetophenone 0.30% SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)


Ethylhexylglycerin 0.15% Pre-neutralized powder polymeric thickener with a MAXIMUM
resistance to electrolytes thanks to its high associative behavior.
Efficient on a wide range of pH from 3 to 8, it is able to formulate
Hanging test : the more the mask hangs the best it is for transparent aqueous gels. It imparts rich, velvet and elegant skin feel.
perceived moisturization by mask user (24h soak /1h hang)
©UNSPLASH

Sepimax Zen real sensorial


enhancer
Increase drying time for increase Transparent liquid /mask
pH: 5.36 / VISCOSITIES: 1M at RT: 1300 mPa.s Brookfield S61 V6
moisture perception Recovery at RT (after 1M at 45°C): 700 mPa.s Brookfield S61 V6
STABILITY: M1 at RT, 45°C
COLD
ADDITIONAL INGREDIENTS: Carbopol 980 carbomer (Lubrizol) / MICROCARE Antioxydant HAP
FORMULATION ADVICES / Mix phase A under defloculator stirring at PROCESS
150~300 rpm until homogeneous. Add phase B to A under defloculator
Hydroxyacetophenone (THOR) / Butanediol/ MICROCARE Emollient EHG EthylhexylGlycerin (THOR)
.
stirring at 150 rpm until homogeneous.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
Senses in action
to relax & soothe

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 33


Well being key focus! KOREA - “N” Time Easy & Multiful to use

Stick balm
Small Luxury items
Rituals for wellbeing
Zero plastic
USA - Technological innovation Consumer experience

Microneedling
Laser for pigmentation EUROPE - Healthy not perfect skin
Radiofrequency AMORE PACIFIC Onhope
=> need for CARE and HEALING Care
Relaxing rituals
CHINA - Global skin care program
Comfort
Protect JAPAN - anti aging as a must
Cocoon Training program for the skin
Conservative market
Search for inside and out + body
Whitening, wrinkle correction
Pre-Care
Sun protection
Specialist consultancy
Pore minimizing
At home routine
=> long term results
Sarah Chapman - SKINESIS
Meso Melt Infusion System

LA ROCHE POSAY Age


Correct Tinted SPF 50 NATURIE
Skin conditioning gel

AVENE
Retinal 0.1

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 34


Senses activation

Resurect evening Eco efficiency Silver generation


rituals
To help strengthen More into online
To improve sleep and
brand image. Be shopping, search for
decrease stress,
credible and push comfort and healthy
interest of
brand’s achievement aging. Dedicated care
Aromatherapy
and goals on for menopause on the
reduce anxiety with
sustainability rise. In search of
trusted ingredients
comfortable textures

Zeila GARNIER FENTY Beauty Gel- Cream PAUSE


BIRCH Box Minimalism with African Qasil incorporates goals to bolster Gender neutral, vegan clean Hot flash cooling mist,
Mood improve set for sleep leaf powder eco-friendly reputation skincare line collagen booster, fascia
stimulation

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022


AS40093B I MY ICONIC HAND CREAM
SKIN CARE

A D.I. Water Up to 100%


Excellent skin protection thanks to Liquid crystals,
Glycerin 3.00% EMOGREEN™ L19 and 20% SHEA BUTTER
1,3-Butylene Glycol 3.00%
SOLAGUM™ AX 0.30%
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
B MONTANOV™ 202 4.00% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the
skin. Water reserves are instantly boosted, water circulation is improved in all skin layers
Butyrospermum Parkii (Shea Butter) 20.00% and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism of
EMOGREEN™ L19 10.00% action has been validated by cosmetogenomics. Cosmos and Natrue approved.
SEPINOV™ WEO(Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer )
C SEPINOV™ WEO 0.70% Pre-neutralized powder polymeric thickener on a wide pH range (3-12) and compatible with
4a Ethylene Oxide free formulas. It has good resistance to electrolytes and imparts a light,
satin-like skin feel.
D AQUAXYL™ 1.50% MONTANOV™ 202 Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside
Rosmarinus Officinalis (Rosemary) Leaf Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a
extract 0.20% role in maintaining skin moisturization over time. Thanks to liquid crystals which contain
NOC= Phenoxyethanol and Ethylhexylglycerin 0.70% water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved.
98,3% Ethylhexylglycerin and Caprylyl Glycol 0.30%
SOLAGUM™ AX Acacia Senegal Gum and Xanthan Gum
Fragrance 0.20%
©UNSPLASH

NATURALITY Smart combination of natural thickening polymers. SOLAGUM™ AX also displays


PROFILE emulsifying properties that allow to stabilize up to 15% of oils. Can be used with hot or cold
according to
ISO 16128 norm process. Ecocert and Natrue approved, it is the perfect ally for all natural formulation.
White Cream / Challenge test: Criteria A / Packaging: Jar EMOGREEN™ L19 C15-19 Alkane (Plant-based & Renewable)
Deep Moisturizing and Repair pH: 5.8 / VISCOSITIES: D7 at RT: 124 000 mPa.s Brookfield LV4-6 EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE
Recovery at RT (after 1M at 45°C): mPa.s Brookfield LV4-6 alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and
STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C. Natrue.
with
FORMULATION ADVICES / Weigh phase A and B and heat them to 85°C. Add
phase C to B, and then add phase A to phase B+C, homogenize it by Silverson
30% Emollients rotor-stator 4000 rpm for 4 minutes. Cool down under anchor stirring 100
ADDITIONAL INGREDIENTS: Glycerin - Pricerine 9091 (KARRY) /BUTYROSPERMUM PARKII (SHEA BUTTER): Lipex
Shea (AAK)/ROSMARINUS OFFICINALIS (ROSEMARY) LEAF EXTRACT:Duralax Oxidation management blend NH10
rpm without water bath for 10 minutes and followed with water bath cooling (Kalsec)/ Phenoxyethanol (and) Ethylhexylglycerin: Euxyl PE 9010 (S&M)/ Ethylhexylglycerin and Caprylyl glycol: Euxyl
SC 10( S&M)/Fragrance: Frag276148(Drom)
for another 10 minutes. Add phase D one by one below 45°C and stir till
uniform. Stop stirring at 30°C. .
More informations available on seppic.com
LZ201603 - 2005

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40107 I TWIST YOUR FACE
Color correcting GELTRAP™
MAKE UP

A Aqua/Water Up to 100%
Universal coverage non drying and comfortable,
SEPIPLUS™ S 1.60%
with Microbiome respect.
AQUAXYL™ 1.50% Thank you GELTRAP™!
EQUIBIOME™ 1.00%
Glycerin 3.00%
SEPIPLUS™ S (Hydroxyethyl Acrylate/ Sodium Acryloyldimethyl Taurate Copolymer and Polyisobutene and
PEG-7 Trimethylolpropane Coconut Ether))
Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It offers excellent resistance to
B EASYNOV™ 2.00% electrolytes. It can be used to formulate soft and rich textures that impart absolute comfort to the skin

SEPIMAT™ H10 1.00% AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol)


EMOSMART™ L15 2.00% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted,
water circulation is improved in all skin layers and water loss is reduced (in vitro and in vivo tests prove this efficacy). It’s mechanism
EMOSMART™ L19 3.00% of action has been validated by cosmetogenomics. Cosmos and Natrue approved.

Phenoxyethanol and 0.80% EQUIBIOME™(Propylene Glycol and Arctium Lappa Root Extract)
Ethylhexylglycerin Extracted from the roots of Great Burdock (Arctium lappa), EQUIBIOME™ is an active ingredient maintaining the delicate
skin-microbiota equilibrium for a perfect and harmonious skin. Tested in vivo & in vitro, EQUIBIOME™ has shown powerful soothing
properties and reinforces skin barrier.
Fragrance 0.10%
Titanium Dioxide and Stearoyl 2.00% EASYNOV™ (Octyldodecanol and Octyldodecyl Xyloside and PEG-30 Dipolyhydroxystearate)
Liquid lipophilic emulsifier. EASYNOV™ realizes emulsions with an internal gelled aqueous phase extra-rich in water by a cold
Glutamic acid process with gentle stirring: the GELTRAP™ emulsions. This novel formulation form offers surprising textures, marrying freshness
and cushion effect.
CI 77288 0.40%
SEPIMAT™ H10 (Methyl Methacrylate Crosspolymer and Paraffinum Liquidum and Silica)

SEPIMAT™ H10 is a hollow lipodispersible powder with excellent absorbent and matifying properties. Its hemispherical shape
Green GELTRAP™/ Packaging: Pump makes it easy to press and perfect for loose, hot poured and pressed powder applications.

pH: NA / VISCOSITIES: 1M at RT: 32 000 mPa.s Brookfield S4S6 / EMOSMART™ L15 (C13-15 Aljane) EMOSMART™ L19 (C15-19 Aljane)
Recovery at RT (after 1M at 45°C): 31 000 mPa.s Brookfield S4S6 EMOSMART™ L15 is a high-purity, non polar, and biodegradable emollient. This high purity alkane shows an excellent compatibility
STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C./ after centrifugation (3000 rpm 20 with all types of oils, especially with silicone oils. It gives a fresh and vanishing texture with a dry and matt afterfeel. Inert and stable,
it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…)
minutes)
Transforming texture with GELTRAP™ EMOSMART™ L19 is a high-purity, non polar and biodegradable emollient. It shows an excellent compatibility with all types of oils
and helps to disperse minerals (TiO2/ZnO). It gives a fresh and vanishing texture with a matt afterfeel. Inert and stable, it can be used
in all types of applications, even in extreme conditions (pH, oxidizing/reducing media…).
technology FORMULATION ADVICES / Add water and SEPIPLUS™ S into the
maint tank and homogenize (3000 rpm, 4 minutes). Add the rest of
phase A into the tank and stir (50 rpm, 15 minutes). In a separate
Color change, comfort and excellent beaker, mix phase B by IKA (Ultra Turrax T25) rotor stator 9500 rpm
for 4 mn. Add phase B into phase A and start agitation to ADDITIONAL INGREDIENTS: Phenoxyethanol and Ethylhexylglycerin EUXYL PE9010 (SCHULKE & MAYR) /

coverage without drying homogenize (50 rpm, 20 minutes). Fragrance 86395991 (DROM)/ CI 77288 Chromium Oxide Green Unipure Green LC 788 (SENSIENT)/ Titanium
Dioxide and Stearoyl Glutamic Acid BTD ASG2 (KOBO)

Room
Temperature More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40141B I MARINE POWER CELL RECOVERY SERUM
SKIN CARE Strong efficacy with CELTOSOME™ unique
A D.I. Water Up to 100% technology!
SOLAGUM™ TARA 0.08%
Sodium Hyaluronate 0.05% MONTANOV™ L (C14-22 Alcohols and C12-20 Alkyl Glucoside)
Glucolipid emulsifier in harmony with nature. MONTANOV L is well-suited to formulate different textures (from
sprayable to butter cream) no matter the nature or the quantity of fatty phase used. It stabilizes emulsions, and
has a strong moisturizing power since it promotes liquid crystals which prevent the skin from dehydration
B MONTANOV™ L 0.80%
(efficacy proven in vivo). Ecocert and Natrue approved.
LANOL 99 0.60%
SIMULGEL™ INS 100 (Hydroxyethyl Acrylate / Sodium Acryloyldimethyl Taurate Copolymer and Isohexadecane
EMOGREEN™ L15 2.80% and Polysorbate 60)
Hydrogenated Polyisobutene 0.60% Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It provides also excellent oil
stabilizing effect. Versatile and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid
to very thick formulas. It creates melting textures with a fresh skin feel.
C SIMULGEL™ INS 100 2.20% SOLAGUM™ TARA (Caesalpinia Spinosa Gum)
A powerful thickening natural gum from Caesalpinia spinosa endosperm seeds. Synergistic efficiency with
synthetic and natural polymers. Ecocert, Cosmos and Natrue approved.
D 1,3 Butylene Glycol 2.00% AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol )
Glycerin 8.00% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves
are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
CERAMOSIDES™ HP 0.20%
4a 1,2 Hexanediol 0.40% OLIGOGELINE™ SPE(Chondrus crispus extract)
Second skin ingredient: binds carrageenans and skin proteins, moisturizing skin and reduce TEWL,
Hydroxyacetophenone 0.40% re-mineralizing because of high calcium content (antiagiing & slimming).
CERAMOSIDES™ HP (Triticum vulgare (Wheat) seed extract)
The essence of perfect skin. CERAMOSIDES™ HP are an original combination (patented) of natural
E AQUAXYL™ 0.50% CERAMIDES and OMEGA which protect the skin from the loss of elasticity, one of the primary causes of
OLIGOGELINE™ SPE 0.50% enlarged pores with age. After 56 days of treatment, the skin roughness is smoothed (-73% skin roughness)
TALADVANCE™ 3.00% and the pores are visibly smaller.
CELTOSOME™ CRITHMUM MARITIMUM 0.20% TALADVANCE™ (Glycerin - Aqua/Water - Centella Asiatica Leaf Extract)
Centella asiatica extract, it regulates the cellular cycle in the epidermis, increases fibroblast functionality &
CELTOSOME™ ERYNGIUM MARITIMUM 0.05%
protects the dermis. It provides a flash & long-lasting radiance for a perfect complexion!
Tocopherol 0.20%
CELTOSOME™ CRITHMUM MARITIMUM(Crithmum Maritimum Callus Culture Filtrate)
Honey 0.30% Pure Sea Fennel stem cells which acts on the prevention of skin aging & cutaneous pigmentation (in vivo
NOC= Fragrance 0.03% study).

96,5% CELTOSOME™ ERYNGIUM MARITIMUM ( Eryngium Maritimum Callus Culture Filtrate


Pure marine plant stem cells (hydrodispersible powder form) to act on multiple factors of skin aging.
Baby skin feel NATURALITY
PROFILE
Translucent grey pourable emulsion/ Packaging: Dropper
Reinforces the dermo epidermal junction (self evaluation in vivo study on firmness)
LANOL 99 (Isononyl Isononanoate)
according to pH: 5.4/ VISCOSITIES: 1M at RT: 6,000 mPa.s Brookfield LV1-6 / Emollient agent. Polar ester. Soft and light touch, non greasy finish and short play-time.
Multifunction ISO 16 128 norm
Recovery at RT (after 1M at 45°C): 5, 800 mPa.s Brookfield LV1-6.
STABILITY: Stable 1M at RT, 45°C, -18°C and cycles -5°C/+40°C.
EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable) is a non polar and biodegradable, plant-based
CELTOSOME™ Technology emollient. It’s THE alternative to volatile silicone oils. This high purity vegetable alkane is conformed to Cosmos
and Natrue.
FORMULATION PROCESS ADVICES / Mix phase A well till uniform. Weigh phase
B. Heat phase A and phase B to 75°C. Add phase C to phase B, add phase A to
2 Million cells in 1gr of Serum (daily use) phase B+C, then homogenize it for 4 minutes at 4000 rpm by Silverson. Stir the ADDITIONAL INGREDIENTS: 1,2 Hexanediol : Effsin HD(Schülke & Mayr)- Hydroxyacetophenone:Effsin HDASchülke
emulsion under anchor stirring 150 rpm. Pre-mix phase D, heat and stir it at 80°C & Mayr)- Fragrance: Frag435243 (DROM)-Sclerotium Gum: Acitgum CS11 QD (CarGill)-Sodium Hyaluronate: Sodium
water bath till CERAMOSIDES™ HP and Hydroxyacetophenone dissolve well. Add Hyaluronate (Freda)-Dimethicone: PMX 200 350cst (Dowcorning)-Hydrogenated Polyisobutene: Palatane L-14E
LZ211701-2105 (Vatange)-Tocopherol : Tocopherol(DSM)-Honey: Honey (Guanshengyuan)
phase D into the emulsion and stir till 30°C, add phase E one by one separately and
stir it for 20 min till uniform.

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40151A I RESIST TRACES OF AGING
SKIN CARE

A SEPILIFT™ DPHP 0.50%


Say goodbye to wrinkles
Octyldodecanol 50.00% thanks to the SEPILIFT™ DPHP.
2
B Tocopheryl acetate 0.50%
SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline)
C Helianthus Annuus (SUNFLOWER) Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the
Seed Oil 15.00% skin and reduces the appearance of visible signs of aging (effectiveness proven in vivo).
SEPILIFT™ DPHP firms skin tissues by stimulating the contraction of the collagen fibers.
Caprylic Capric Triglyceride 3.99% It protects dermal fibers from enzymatic lysis and exerts an anti-free radical action.
EMOGREEN™ L19 30.00% SEPILIFT™ DPHP has intrinsic emulsifying properties and also gives the emulsion a
Lithospermum Erythrorhizon 0.01% specific feel. Ecocert and Nature approved.
4a Perfume 0.10%
EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable )
EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE
alternative to silicone oils. This high purity vegetable alkane is conformed to Cosmos and
Natrue. It gives a fresh and gliding touch, with a soft afterfeel. Inert and stable.
4b
©UNSPLASH

NOC=
Pink Clear Liquid Oil / Packaging: Dropper
Booster in Pro Base or use 99,9%
VISCOSITIES: 1M at RT: < 50 mPa.s Brookfield LV1-6 /
Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.
Essence itself NATURALITY
PROFILE STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
according to

DIY skin care


ISO 16 128 norm
FORMULATION PROCESS ADVICES / Mix phase A well, heat it with
80°C water bath and stir it till SEPILIFT™ DPHP dissolves well. Add
Anti-Wrinkle phase B, C in phase A separately and stir the system under anchor
stirring 150 rpm for 10 min or till uniform. ADDITIONAL INGREDIENTS: Octyldodecanol – Eutanol G (BASF) / Lithospermum Erythrorhizon - (GNL)/Helianthus
Annuus (SUNFLOWER) Seed Oil(YQ TECH)/ Caprylic Capric Triglyceride:Myritol 318(BASF)/ Tocopheryl acetate:()DSM)/
Perfume: Frag 86413672( Drom)

LZ214703-2112

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40154 I NATURAL CARE BUTTER
SKIN CARE
A MONTANOV™ 202 3.00%
EMOGREEN™ L15 10.00%
Caprylic Capric Triglyceride 4.00%
Hydrogenated Olive Oil Decyl Esters 1.00% MONTANOV™ 202 associated with SEPILIFE™ NUDE
C10-18 Triglyceride 1.00% stabilizes the oily phase and provides liquid crystal structure
Bees Wax 1.00% which offers long term moisturizing effect combined with
Carnauba Acid Wax 0.60%
AQUAXYL™!
Butyrospermum Parkii (Shea Butter) 2.80%
Tribehenin 2.20% MONTANOV™ 202 (Arachidyl Alcohol and Behenyl Alcohol and Arachidyl Glucoside )

SEPILIFT™ DPHP 1.00% Glucolipid emulsifier derived from vegetable origin. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over
time. Thanks to liquid crystals which contain water, MONTANOV™ 202 helps to keep skin moisturized. Ecocert and Natrue approved.
Tocopherol 0.30% AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water reserves are instantly boosted
and water loss is reduced (in vitro and in vivo tests prove this efficacy).
B Pure Water Up to 100.00% MADECASSOSIDE (Madecassoside)

MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin and atopic-prone skin (in
SOLAGUM™ TARA 0.15% vivo results on psoriasis & atopic dermatitis-prone skin).
Glycerin 4.00% EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable))

L-Arginine 0.10% MOGREEN™ L15 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to volatile silicone oils. This high purity
vegetable alkane is conformed to Cosmos and Natrue.
Beyond the lightweight and non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be used in all types of applications,
even in extreme conditions (pH, oxidizing/reducing media…).
C SEPILIFE™ NUDE 2.20% SOLAGUM™ TARA (Caesalpinia Spinosa Gum)

A powerful thickening natural gum from Caesalpinia spinosa endosperm seeds. Synergistic efficiency with synthetic and natural
polymers. Ecocert, Cosmos and Natrue approved.
SEPILIFE™ NUDE (Sodium Acrylate/Sodium Acryloyl Dimethyl Taurate Copolymer and C15-19 Alkane and Polyglyceryl-6 Laurate and Polyglycerin-6)
D AQUAXYL™ 3.00% Pre-neutralized liquid polymeric thickener on a wide range of pH (5.5 to 12). It also emulsifies and stabilizes all types of oily phases
Phenoxyethanol & Chlorphenesin & Glycerin 0.80% with a cold process. This polymer has 61% of natural origin content according to ISO 16128. Its improved biodegradability makes it
possible to formulate readily biodegradable finish products. SEPILIFE™ NUDE allows formulating from sprayable to thick textures,
with a quick-break effect and a nude skin feel, for all your natural concept cosmetics.

SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline)


©UNSPLASH

E MADECASSOSIDE 0.20% Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the skin and reduces the appearance of visible
signs of aging (effectiveness proven in vivo). SEPILIFT™ DPHP firms skin tissues by stimulating the contraction of the collagen fibers.
Pure Water 2.00% It protects dermal fibers from enzymatic lysis and exerts an anti-free radical action. SEPILIFT™ DPHP has intrinsic emulsifying
properties and also gives the emulsion a specific feel. Ecocert and Natrue approved.
NOC=
99,1% F Lavandula Angustifolia (LAVENDER) Oil 0.05%
ROSMARINUS OFFICINALIS (ROSEMARY) LEAF OIL 0.05%
NATURALITY

Natural
PROFILE
according to ADDITIONAL INGREDIENTS: Caprylic capric triglyceride - Myritol 318 (BASF )/ C10-18 Triglyceride - DUB CIRE H1
ISO 16128 norm (DUB ) / Hydrogenated Olive Oil Decyl Esters (Vatange)/ Bees Wax (Kahl)/ Carnauba Acid Wax (Kahl)/ Butyrospermum
White Thick Cream /Challenge test: Criteria A /Packaging: Jar Parkii (Shea Butter): Lipex shea( AAK)/ Tocopherol: (DSM)/ Tribehenin: Lipovol GBT (Vantage)/Phenoxyethanol &

Moisturization
Chlorphenesin & Glycerin :Microcare PHC (Thor) /Lavandula Angustifolia (LAVENDER) Oil (Puen) /ROSMARINUS
pH: 5.5/ VISCOSITIES: 1M at RT: 612 000 mPa.s Brookfield LV T96-6 / OFFICINALIS (ROSEMARY) LEAF OIL(Puen).
Recovery at RT (after 1M at 45°C): 692 000 mPa.s Brookfield LV T96-6.
Soothing STABILITY: Stable M3 at RT, 45°C, -18°C and cycles -5°C/+40°C.

PROCEDURE ADVICES / Weigh ingredients of phase A and heat to 80℃. Disperse


SOLAGUM™ TARA in water and heat phase B to 80℃. Pre-disperse phase C in A formula related to NATURAL COSMETICS concept.
More informations available on seppic.com
phase A, add phase B into phase A+C, homogenize it by Silverson at 4000 rpm for 5
minutes. Stir the emulsion under anchor stirring 100 rpm for 10 min. Mix phase E
LZ203001 - 2007 until clear. Add phase D, E and F into the emulsion and stir it under anchor stirring at
150 rpm until uniform. Hot-fill in jars.
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40158 I RESIST TRACES SMOOTHER
SKIN CARE

A D.I. Water Up to 100%


Say goodbye to wrinkles thanks to
SOLAGUM™ AX 0.30% SEPILIFT™ DPHP + ASPAR’AGE™ .
2 Glycerin 3.00%
L-Arginine 0.10% SEPILIFT™ DPHP (Dipalmitoyl Hydroxyproline)
Plant-derived hydroxyproline "Lipovector". An anti-wrinkle ingredient, it moisturizes the skin and reduces
the appearance of visible signs of aging (effectiveness proven in vivo). SEPILIFT™ DPHP firms skin tissues
by stimulating the contraction of the collagen fibers. It protects dermal fibers from enzymatic lysis and
B EMOGREEN™ L19 2.00% exerts an anti-free radical action. SEPILIFT™ DPHP has intrinsic emulsifying properties and also gives the
SEPILIFT™ DPHP 1.00% emulsion a specific feel. Ecocert and Nature approved.
Prunus Amygdalus Amygdalus Dulcis EMOGREEN™ L19 (C15-19 Alkane (Plant-based & Renewable )
(Sweet Almond) Oil 3.00% EMOGREEN™ L19 is a non polar and biodegradable, bio-sourced emollient. It’s THE alternative to silicone
oils. This high purity vegetable alkane is conformed to Cosmos and Natrue. It gives a fresh and gliding
Tocopherol 0.20% touch, with a soft afterfeel. Inert and stable.
4a AQUAXYL™ (Xylitylglucoside & Anhydroxylitol & Xylitol )
C SEPINOV™ EMT 10 0.80%
AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).

D Aloe Barbadensis Leaf Powder (200:1) 0.05% ASPAR’AGE™(Aqua/Water and Propanediol and Asparagosis Armata Extract)
4b Water 2.00% ASPAR’AGE™, an extract of Asparagopsis armata, regulates the effect of "Senescent Messaging
Secretome" in order to reduce the contagious aging on young cells. Thanks to this marine active, the skin
looks younger!
E AQUAXYL™ 1.50%
©UNSPLASH

SEPINOV™ EMT 10 (Hydroxyethyl Acrylate / Sodium Acryloyldimethyl Taurate Copolymer)


ASPAR'AGE™ 2.00%
Pre-neutralized powder polymeric thickener on a wide pH range (3-12). It provides also excellent oil
NOC=
Phenoxyethanol and Caprylyl Glycol 0.80% stabilizing property even in presence of a high percentage of oily phase. It imparts satiny and fresh skin
feel. Excellent tolerance even for baby care, irritated skin, intimate hygiene and oral care. A universal
99,3% Fragrance 0.06%
choice!

NATURALITY SOLAGUM™ AX(Acacia Senegal Gum and Xanthan Gum )


PROFILE
according to
White Fluid Serum/ Challenge test: Criteria A / Packaging: Pump Combination of thickening polymers. Eco-friendly product developed in accordance with sustainable
ISO 16128 norm pH: 5.4/ VISCOSITIES: 1M at RT: 2400 mPa.s Brookfield LV1-6 / development. Can be used with hot or cold process. Ecocert and Natrue approved.
Boost Effect Recovery at RT (after 1M at 45°C): 2200 mPa.s Brookfield LV1-6.
STABILITY: Stable M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
Light Texture ADDITIONAL INGREDIENTS: Prunus Amygdalus Dulcis (Sweet Almond) Oil– Lipovol ALM(LIPO) / Aloe Barbadensis
FORMULATION PROCESS ADVICES / Mix phase A and phase B separately well. Leaf Powder: 200:1 clear Aloe Powder( Aloecorp )/ L-Arginine(guoyao)/ Tocopherol(DSM)/ Phenoxyethanol and
Caprylyl Glycol : Microcare PHG(Thor)
Anti-Wrinkle Heat both phases with an 80°C water bath until SEPILIFT™ DPHP dissolved well.
Add phase C into phase B, and add phase A into phase (B+C), homogenize under the
Silverson rotor-stator at 4000 rpm for 4 minutes. Cool down under anchor stirring A formula related to NATURAL COSMETICS concept.
More informations available on seppic.com
at 100 rpm. Add premixed phase D and phase E at 45°C Separately. Stop stirring
LZ202910-2007 when uniform.

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40160 I WHIPPED BODY BUTTER
SKIN CARE

A D.I. Water Up to 100%


Glycerin 3.00% MONTANOV™ 68 MB (Cetearyl Alcohol and Cetearyl Glucoside)
2 Tromethamine 0.18% Glucolipid emulsifier derived from vegetable origin. It can be used to formulate rich, smooth textures with
any type of oil phase. Promoter of liquid crystals, it plays a role in maintaining skin moisturization over time.
Ecocert, Cosmos and Natrue approved.
B MONTANOV™ 68 MB 1.00%
SENSANOV™ WR 2.00% SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols )
EMOSMART™ V21 3.00% Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of lightness
LANOL™ 2681 4.00% followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally SENSANOV™ WR
emulsions leaves the skin supple with a long lasting sensation of comfort. This protective film sensation is
LANOL™ P 2.00% reflected in vivo by a water-resistant effect for the development of sun care formulations. SENSANOV™
Caprylic Capric Triglyceride 5.00% WR reduces oiliness of extra rich emulsion. Ideal for makeup products, SENSANOV™ WR is able to
Butyrospermum Parkii (Shea Butter) 3.00% emulsify a high percentage of fillers keeping a perfectly smooth texture.

C SEPIMAX™ ZEN 0.15% AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol )


4a SEPIPLUS™ 400 1.40% AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).
D AQUAXYL™ 1.50%
Hydroxyacetophenone 0.30% EMOSMART™ V21(C18-21 Alkane)
Ethylhexylglycerin 0.15% EMOSMART™ V21 is a high-purity, non polar and biodegradable emollient. It shows an excellent
compatibility with all types of oils. It allows to obtain fresh textures with a soft finish and matt veil. Inert and
Phenoxyethanol 0.20% stable, it can be used in all types of applications, even in extreme conditions (pH, oxidizing/reducing
Nylon-66 4.00% media…).
NOC= Unicert Yellow 08005-J (1% water solution) 0.07%
89,9% Unicert Yellow #4 (1% water solution) 0.01% SEPIPLUS™ 400 (Polyacrylate-13 and Polyisobutene and Polysorbate 20 )
©UNSPLASH

Fragrance 0.10% Pre-neutralized and concentrated liquid polymeric thickener on a wide range of pH (3 to 12). It imparts a
NATURALITY slippery silicone-like feel and can be used to reduce the use of silicone in formulas. Due to this benefit,
PROFILE which makes it easy to spread, along with its perfect compatibility with various sunscreen coatings, it is
according to
ISO 16 128 norm ideal for sun care products.
Yellowish Cream/ Challenge test: Criteria A / Packaging: Jar
VISCOSITIES: 1M at RT: 268 000 mPa.s Brookfield T-E95-6 / SEPIMAX™ ZEN (Polyacrylate Crosspolymer-6)
Recovery at RT (after 1M at 45°C): 278 900 mPa.s Brookfield T-E95-6. Pre-neutralized powder polymeric thickener with a MAXIMUM resistance to electrolytes thanks to its high
associative behavior. Efficient on a wide range of pH from 3 to 8. It provides oil stabilizing effect and
STABILITY: M1 at RT, 45°C, -18°C and cycles -5°C/+40°C.
imparts rich, velvet and elegant skin feel.
Luxurious Sensory
LANOL™ 2681 (Coco-Caprylate/ Caprate)
Nourishing Texture Emollient agent from vegetable origin. Polar ester with soft and light touch, non greasy finish, medium
FORMULATION PROCESS ADVICES / Mix phase A well and phase B well, heat playtime. Cosmos approved.
Moisturizing them with 80°C water bath until dissolve well. Add phase C into phase B. Add
phase A into phase B+C, homogenize at 4000 rpm for 4 minutes. Cool down to
45°C. Add phase D one by one under anchor stirring and stop stirring at 30°C. ADDITIONAL INGREDIENTS: Caprylic capric triglyceride– Myritol® 318(BASF) / Ethyl ascorbyl Ether-Ethyl ascorbyl
Ether(Anallerg)/ Hydroxyacetophenone-Microcare® Antioxidant HAP(THOR)/Ethylhexylglycerin - Microcare Emollient
LX202804-2007 EHG (THOR)/ Phenoxyethanol- Microcare PE(THOR) / Nylon-66 - GBN 039(Cornnell Bros.)

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40172 I SENSASKIN ANTI-FRICTION SPRAY
SKIN CARE

SENSANOV™ WR contributes to excellent


A D.I. Water Up to 100% sprayability, effective FIXATIVE &
Glycerin 3.00% ANTI-FRICTION ability.
Sodium Hydroxide (25% Water 0.51%
Solution)
SENSANOV™ WR (C20-22 Alkyl Phosphate and C20-22 Alcohols )
Versatile phosphate anionic emulsifier effective at low dosage (1 to 3%). Provides a feeling of lightness
B SENSANOV™ WR 4.00% followed by the sensation of a matt velvety veil which slowly envelops the skin. Finally SENSANOV™ WR
emulsions leaves the skin supple with a long lasting sensation of comfort. This protective film sensation is
reflected in vivo by a water-resistant effect for the development of sun care formulations. SENSANOV™
C AQUAXYL™ 1.00% WR reduces oiliness of extra rich emulsion. Ideal for makeup products, SENSANOV™ WR is able to
MADECASSOSIDE 0.20% emulsify a high percentage of fillers keeping a perfectly smooth texture.
Phenoxyethanol & Chlorphenesin & 0.80%
AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol )
4a Glycerin AQUAXYL™ moisturizes and restructures the skin by harmonizing the hydric flow of the skin. Water
reserves are instantly boosted and water loss is reduced (in vitro and in vivo tests prove this efficacy).

MADECASSOSIDE (Madecassoside)
MADECASSOSIDE is a pure active from Centella asiatica that soothes and brings comfort to sensitive skin
and atopic-prone skin (in vivo results on psoriasis & atopic dermatitis-prone skin).

NOC=
98,3%
©UNSPLASH

NATURALITY
PROFILE
according to
White Lotion/ Packaging: Spray
ISO 16 128 norm pH: 5.0 / VISCOSITIES: 1M at RT: 10 000 mPa.s Brookfield S1-V6 /
Recovery at RT (after 1M at 45°C): 20 500 mPa.s Brookfield S1-V6.
STABILITY: M3 at RT, 45°C, -18°C and 1 month after cycles -5°C/+40°C.

Fine Spray
Fights against irritation induced by masks ADDITIONAL INGREDIENTS: Sodium Hydroxide (Guoyao) / Phenoxyethanol & Chlorphenesin & Glycerin : Microcare
FORMULATION PROCESS ADVICES / Mix phase A well and phase B PHC (Thor)
Can also be used as make-up fixative Spray well, heat them with 80°C water bath until dissolve well. Add phase A
into phase B, homogenize with Silverson at 4000 rpm for 4 minutes.
Stir and cool down to 45°C under anchor stirrer. Add phase C one by
one under anchor stirring 100 rpm. Stop stirring at 30°C.
LZ202903-2101

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40182 I CLEAR HEALING TECA WATER
SKIN CARE

This crystal clear toner has skin remodeling,


redensifying and anti-stretch marks functions.
A D.I. Water Up to 100%
Butylene Glycol 3.00%
Phenoxyethanol and 0.70% TECA ™ (Asiaticoside - Madecassic Acid - Asiatic Acid )
Ethylhexylglycerin
Titrated Extract of Centella Asiatica, better known as TECA™, is a
B MONTANOX™ 20 DF 1.00% high purified composition of some of the most powerful
Methylpropanediol 5.00% molecules found within this plant. TECA™ works to repair
TECA™ 0.20% damaged skin restoring skin integrity by boosting the vital
proteins within the dermis and by soothing effect .
C AQUAXYL™ 1.00% AQUAXYL™ (Xylitylglucoside and Anhydroxylitol and Xylitol)
AQUAXYL™ moisturizes and restructures the skin by harmonizing
the hydric flow of the skin. Water reserves are instantly boosted,
water circulation is improved in all skin layers and water loss is
reduced (in vitro and in vivo tests prove this efficacy). It’s
©UNSPLASH

Transparent solution / Packaging: sheet mask mechanism of action has been validated by cosmetogenomics.
NOC= Cosmos and Natrue approved.
pH: 5.2 / Turbidity: 19.6 NTU (Turbidimeter 2100Q) /
93.3%
VISCOSITIES: 1M at RT: <50 mPa.s Brookfield LVDV1 S61V6 / MONTANOX™ 20 DF (Polysorbate 20)
NATURALITY
PROFILE STABILITY: M3 at RT, 5°C, 45°C, cycles -5°C/+40°C. Solubilizer.
according to

Transparence & repair ISO 16128 norm

FORMULATION ADVICES / Mix phase A clearly.


Reconstruction Weigh phase B in a beaker, heat it up to 60~70℃,
Remodeling dissolve to clear, and then cool down to room
temperature. Add phase B & C into phase A and stir it ADDITIONAL INGREDIENTS: Methylpropanediol : DUB DIOL (Dubois)
until uniform. Filter the sample with paper filter before
BW193611-2105 packing.
More informations available on seppic.com
All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the useCP-CP22065
of its products for the Discover our
preparation and theFormulation
assessment of theUniverses In Cos since
hereinabove formulation Korea May 2022
the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40195 I SKINSATION SUN GEL SPF50 PA+++ (calculated )
Fresh & comfortable feeling
SUN CARE
A soft skin sensation thanks to the
combination of our Emollient and Polymers
A Ethylhexyl Methoxycinnamate 7.50% A pleasure texture to play safe with the sun!
4-Methylbenzylidene Camphor 3.00%
Ethylhexyl Triazone 3.00% SEPIMAX ZEN™ (Polyacrylate Crosspolymer-6)
Bis-Ethylhexyloxyphenol Powder polymer with a MAXIMUM resistance to electrolytes thanks to its
Methoxyphenyl Triazine 3.00% high associative behavior. Stable from pH 2 to 8, it enables the creation of
5.00% formulas with a specific skin feeling, included foaming formulas: rich,
Ethylhexyl Salicylate velvety and elegant. It is now possible to formulate transparent aqueous
Diisopropyl sebate 3.00% gels, cream-gels and emulsions with any kind of active ingredients and to
LANOL™ 37T 4.00% achieve ZEN.
B SEPIMAX™ ZEN 0.20% SIMULGEL™ INS 100 (Hydroxyethyl Acrylate/ Sodium Acryloyldimethyl Taurate
SIMULGEL™ INS 100 1.50% Copolymer and Isohexadecane and Polysorbate 60)
Pre-neutralized liquid polymeric thickener on a wide range of pH (3 to 12). It
C D.I Water Up to 100% provides also excellent oil stabilizing effect. Versatile and efficient,
SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to
D Methylene Bis-Benzotriazolyl very thick formulas. It creates melting textures with a fresh skin feel.
Tetramethylbutylphenol 6.00%
LANOL™ 37 T (Triheptanoin)
E Citric acid (20%) 0.09% LANOL 37T is a good organic sunscreen solubilizer.
©UNSPLASH

Hydroxyacetophenone 0.50%
1,2-Hexanediol 0.50%

Ivory Cream gel / Packaging: pump


pH: 6.5 / VISCOSITIES: 1M at RT: 29000 mPa.s Brookfield LVDV1 S63/V6
Recovery at RT (after 1M at 45°C): 30 200 mPa.s Brookfield LVDV1 S63/V6 ADDITIONAL INGREDIENTS: Ethylhexyl Methoxycinnamate:Uvinul® MC 80 (BASF)/ Ethylhexyl Triazone:Uvinul® T
High protection base STABILITY: M1 at RT, 45°C, cycles -5°C/+40°C.
150 (BASF)/ Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine:Tinosorb® S (BASF)/ Methylene Bis-Benzotriazolyl
Tetramethylbutylphenol:Tinosorb® M (BASF) / Ethylhexyl Salicylate: Neo Heliopan® HMS (Symrise)/
Hydroxyacetophenone: Microcare HAP(Thor)/ 1,2-Hexanediol: Microcare HA (Thor) / Diisopropyl sebate: DUB DIS
(Dub)

FORMULATION ADVICES /Mix phase A and heat to 85℃ until clear. Add phase B into
Fresh and smooth finish phase A and stir it until even. Heat phase C to 85℃. Add phase C into phase A+B,
homogenize it by Silverson at 4000 rpm for 4 min. Cool down and add phase D and stir
it with anchor stirrer at 300 rpm for 5 min. Add phase E to adjust pH value to 6.5 and
stir it gently.
LZ214906 - 2201 More informations available on seppic.com

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
AS40196 I WHEAT ESSENTIAL CERAMOSIDES OIL
SKIN CARE

Fresh complexion and visibly beautiful


A CERAMOSIDES™ HP 0.50%
skin thanks to the CERAMOSIDES™ HP.
2 EMOGREEN™ L15 50.00%
Caprylic/Capric Triglyceride 15.00%

B Simmondsia Chinensis (Jojoba) 10.00% CERAMOSIDES™ HP (Glycosphingolipids & Glycolipids)


Seed Oil The essence of perfect skin. CERAMOSIDES™ HP are an original
combination (patented) of natural CERAMIDES and OMEGAs which protect
Helianthus Annuus (Sunflower) 24.30% the skin from the loss of elasticity, one of the primary causes of enlarged
Seed Oil pores with age. After 28 days of application, the complexion is fresher, the
pores are visibly smaller.
4a
C Tocopheryl acetate 0.20% EMOGREEN™ L15 (C15-19 Alkane (Plant-based & Renewable ))
EMOGREEN™ L15 is a non polar and biodegradable, plant-based emollient.
It’s THE alternative to volatile silicone oils. This high purity vegetable alkane
4b is conformed to Cosmos and Natrue. Beyond the lightweight and
non-greasy skin feel, it gives a powdery finish. Inert and stable, it can be
used in all types of applications, even in extreme conditions (pH,
oxidizing/reducing media…)
©UNSPLASH

NOC=
99,8% Yellow Clear Liquid Oil / Packaging: Dropper
NATURALITY
VISCOSITIES: 1M at RT: < 50 mPa.s Brookfield LV1-6 /
Firmness protection PROFILE
according to
Recovery at RT (after 1M at 45°C): <50 mPa.s Brookfield LV1-6.
STABILITY: M1 at RT, 45°C, 4°C and cycles -5°C/+40°C.
ISO 16 128 norm

Antioxidant efficacy FORMULATION PROCESS ADVICES / Mix phase A well, heat it with
65~70°C water bath and stir it till CERAMOSIDES™ HP dissolves well.
Hydration & Glow Add ingredients of phase B and C in phase A separately and stir the
system under cross paddle stirring 150 rpm for 10 min or till uniform.

ADDITIONAL INGREDIENTS: Simmondsia Chinensis (Jojoba) Seed Oil - DW Jojoba Golden (Vantage) / Helianthus
Annuus (Sunflower) Seed Oil - High Oleic Sunflower Oil (Yiqun) / Tocopheryl Acetate - dl-a-Tocopheryl Acetate (DSM)

GS214902 - 2201

All information contained herein is intended merely to demonstrate the utility of SEPPIC products, and should not be construed as granting license to practice any compositions or methods covered by a patent or a A company
patent application. All information contained in this specific technical documentation is believed to be accurate and has been set up by SEPPIC according to its own described methods and processes. SEPPIC however
does not assume any liability or risks involved in the use of its products for the preparation and the assessment of the hereinabove formulation since the condition of use are beyond its control. SEPPIC customer must
insure that the duplication of the hereinabove formulation is not infringing any intellectual property rights and that it complies with any regulatory status.
INULA HC
Protective oil for dry hair & scalp

1% INULA HC Placebo

After only 1 single rinse-off application

Enhances color uptake


Enhances shine
Provides a soft touch

INULA HC INULA HC INULA HC


replenishes the provides promotes cell
hair lipidic barrier antioxidant action metabolism

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022


Thank you!

Connect with us

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022


Contacts
Nota
The analytical specifications warranted are only those mentioned on the certificate of analysis supplied with each delivery of the product.
Except as set forth above, Seppic* makes no warranties, whether express, implied or statutory, as to the product which is the subject of this document. Without limiting the generality of the foregoing, Seppic* makes no warranty of merchantability of the product or of the fitness of the
product for any particular purpose. Buyer assumes all risk and liability resulting from the use or sale of the product, whether singly or in combination with other goods. The information set forth herein is furnished free of charge and is based on technical data that Seppic* believes to be
reliable. It is intended for use by persons having technical skill and at their own discretion and risk. Since conditions of use are outside Seppic*'s control, Seppic* makes no warranties, express or implied, and assumes no liability in connection with any use of this information. Nothing
herein is to be taken as a license to operate under or a recommendation to infringe any patents.

* Seppic being:

Seppic S.A. - Paris Seppic S.A. - Villers-sur-Fère COLOMBIA - Seppic Colombia SAS RUSSIA - Seppic Office JAPAN - Seppic Office
Paris La Défense 3, rue de Préaux Calle 71 n°10-40 Kosmodamianskaya nab., Air Liquide Japan's Office
50 boulevard National 02130 Villers-sur-Fère Edificio Orbe 71 of 401 52, bld. 2 115035 Granpark Tower 3-4-1 Shibaura
CS 90020 FRANCE Bogota Moscow, Minato-ku, Tokyo 108-8509
92257 La Garenne Colombes Cedex Tél : +33 (0)1 42 91 40 00 COLOMBIA RUSSIA JAPAN
FRANCE [email protected] Tél : +571 702 44 48 Tel. +7 495 641 28 98 ext. 1375 Tél : +81 3 6414 6725
Tél : +33 (0)1 42 91 40 00 [email protected] [email protected]
[email protected]

Seppic S.A. - Castres UNITED STATES - Seppic Inc. GERMANY- Seppic GmbH CHINA - Seppic Shanghai Chemical Specialities Co. KOREA - Seppic Office
127, chemin de la poudrerie – BP 90128 30, Two Bridges Road, suite 210 Martinstrasse 16-20 819 West Nanjing Rd, 12FL, V-Plex,
81105 Castres Cedex Fairfield 50667 Köln Room 1508 Zhongchuang Building, 501, Teheran-ro
FRANCE New Jersey 07004-1530 GERMANY Shanghai 200041 Gangnam-gu,
Tél : +33 (0)5 63 72 69 69 UNITED STATES Tél : +49 (0)221 888824 0 CHINA Seoul, KOREA 06168
Fax : +33 (0)5 63 72 69 70 Tél : +1 973 882 5597 [email protected] Tél : +86 (21) 64 66 01 49 Tél : +82-2-3019-2569
[email protected] [email protected] [email protected]

Seppic S.A. - Pontrieux UNITED STATES - Polykon Manufacturing LLC ITALY - Seppic Italia Srl INDIA - Seppic Speciality Ingredients Pvt Ltd
Zone Industrielle 6201 Engineered Wood Way Via Quarenghi 27 O2 Commercial Twin Tower © 2022 Seppic
B.P. 72 Sandston 20151 Milano B/1304, Asha Nagar Road Seppic is a subsidiary
22260 Pontrieux Henrico County VA 23150 ITALY Mulund (W) of the AIR LIQUIDE group
FRANCE UNITED STATES Tél : +39 02 38009110 Mumbai 400080
Tél : +33 (0)2 96 95 31 32 Tél : +1-804-624-9057 [email protected] INDIA
[email protected] [email protected] Tél : + 91 22 61046464
[email protected]

Seppic S.A. - Lons BRASIL- Seppic Brasil EQCI Ltda POLAND - Seppic Office SINGAPORE - Seppic Office
1 avenue Normandie Niemen Alameda Santos 745/ cj 72/ 7ºfloor Schülke Polska Sp. z o.o. No. 2 Venture Drive
64140 LONS Cerqueira Cesar Al. Jerozolimskie 132 #22-28 Vision Exchange
FRANCE 01419-001 02-305 Varsovie Singapore 608526
Tél : + 33 (0)5 59 13 04 20 São Paulo – SP POLAND SINGAPORE
[email protected] BRASIL Tel. +48 22 11 60 759 Tél : +65 6378 5213
Tél : +55 11 3252 3911 [email protected] [email protected]
[email protected]

CP-CP22065 Discover our Formulation Universes In Cos Korea May 2022 49

You might also like