D-NWR-DY-01

Exam Name: Dell NetWorker Deploy Exam

Full version: 714 Q&As

Full version of D-NWR-DY-01 Dumps

Share some D-NWR-DY-01 exam dumps

below.

1. In a NetWorker environment, a daily scheduled backup was started. However, the volume did
not mount, and the backup failed.
What is the reason for the failure?
A. Volumes labeled in the required pool are appendable.
B. Protection group is not selected on the pool.
C. There are no appendable volumes that match the pool.
D. Tape volumes attached to the NetWorker server are recyclable.
Answer: C

2. In a Microsoft Windows environment, what is a characteristic of a bare metal recovery when

using Dell EMC NetWorker?
A. Can be used to restore individual files
B. Can be used for recovery of networker server database
C. Required when a host encounters a catastrophic failure
D. Restores only the operating system
Answer: C

3. What application does the Enhanced Server Recovery option in EMC NetWorker allow us to
interact with?
A. Home Base
B. Avamar
C. EMC NetWorker module for Microsoft applications
D. Data Protection Advisor
Answer: A

4. An EMC NetWorker administrator configures an advanced file type device, setting the device
target sessions to two, and max sessions to four.
How is data written to the advanced file type device?
A. Each save set is written to a separate file.
B. Each file written by the storage node contains up to four save sets.
C. Four backup jobs will be multiplexed for every two files written to the device.
D. Two save sets will be stored in each file.
Answer: A

5. In a Dell EMC NetWorker datazone, what is contained in a single Client File Index record?
A. Backup volume information
B. Hash of backup contents
C. Path name of a file
D. Backup media location
Answer: C
6. A Dell EMC NetWorker administrator is configuring a staging resource to automatically move
sets that were saved in the past 7 days to another volume. However, the administrator
discovered that no source devices were available.
What is possible reason for this issue?
A. All tape devices are in write-enabled mode only
B. Source volumes on the library are not completely full
C. No disk-based devices were configured
D. Automatic staging to a different device type is not supported
Answer: C

7. What type of Microsoft SQL VSS backup is supported in NMM?

A. Transaction logs
B. Synthetic incremental
C. Database differential
D. Named instance
Answer: D

8. What is the benefit of using the EMC NetWorker Client Direct feature?
A. Reduced bandwidth usage
B. Reduced CPU utilization on the client
C. Reduced number of full backups
D. Reduced client disk access
Answer: A

9. An administrator is configuring backups on a client that requires the use of a directive.

Which application-specific module should be specified to ensure specific files are saved
regardless of the backup level?
A. always
B. swapasm
C. AES
D. rawasm
Answer: A

10. A customer using EMC NetWorker Power edition attempts to set server parallelism to 96.
When saving the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96?
A. Add NetWorker Storage Node Enabler Code.
B. Set device max sessions to 96.
C. Configure group parallelism to 96.
D. Enable diagnostic mode.
Answer: A

11. A backup administrator manages a server environment consisting of hosts running many
different operating systems. The administrator wants to deploy Dell EMC NetWorker to back up
this environment.
On which hosts' OS can the NetWorker server be installed?
A. Windows x86 and Windows x64
B. Windows x64 and Linux x64
C. Solaris and Linux ia64
D. Linux ia64 and Linux x64
Answer: A

12. Thaw application

B. 1. Flush buffers
13. Refer to the Exhibit.

What is the size of the EMC NetWorker synthetic full back up on Saturday?
A. 1.5 TB
B. 1.7 TB
C. 2.45 TB
D. 2.55 TB
Answer: A
14. What is a characteristic of the EMC NetWorker Block Based Backup for Windows feature?
A. Reboot is required before an incremental backup can be performed
B. Full and incremental backups must be on different devices
C. No more than 25 incremental backups can be created between full backups
D. Backup storage must be a deduplication device
Answer: A

15. What is a benefit of performing DD Boost backups with EMC NetWorker Client Direct?
A. Reduced network bandwidth usage
B. Deduplication only occurs on the storage device
C. Failed backup operations resume at a known good point
D. Reduced frequency of performing full backups
Answer: A

16. Which type(s) of Dell EMC NetWorker devices need to be created to implement NetWorker
integration with Data Domain Cloud Tier?
A. Data Domain, Cloud Tier, and CloudBoost devices
B. Data Domain devices only
C. Data Domain and Cloud Tier devices only
D. Cloud Tier and CloudBoost devices only
Answer: C

17. An administrator is configuring Dell EMC NetWorker for a client. They configured 2
NetWorker service ports. The backup is failing.
What needs to be corrected?
A. The number of service ports needs to be increased
B. Unblock the local ports on the firewall
C. The number of connection ports needs to be increased
D. The user should be authorized to configure service ports
Answer: A

18. A Dell EMC NetWorker storage node is connected to a Data Domain system with a virtual
tape library (VTL) configured.
Which type of device should be configured on NetWorker for this VTL on Data Domain?
A. AFTD
B. Tape
C. Cloud
D. Data Domain
Answer: B

19. When performing a server-initiated backup, which EMC NetWorker command is run by the
policy framework and issues a remote execution request to clients?
A. nsrpolicy
B. savegrp
C. savefs
D. nsradmin
Answer: B

20. During the configuration of a tape library attached to a remote EMC NetWorker storage
node, an"Access denied" error message is reported.
What is the root cause of the issue?
A. User on the storage node must have privileges to create the jukebox resources on the
NetWorker server.
B. User configuring the tape library must match the name of the administrative user on the
storage node.
C. The NetWorker storage node has to be defined as a client on the NetWorker server.
D. User on the NetWorker server must have "logon as a service" privileges on the storage node.
Answer: A

21. A Dell EMC NetWorker backup administrator is deciding between guest-level backups
versus NetWorker VMware Protection.
What are the advantages of using NetWorker VMware Protection?
A. Local storage, VLAN, and file-level incremental backups
B. Disaster recovery, application consistent, and instant access
C. Disaster recovery, changed block tracking, and instant access.
D. Disaster recovery, deduplication, and file-level incremental backups
Answer: D

22. What is a supported action sequence for traditional workflows in Dell EMC NetWorker?
A. Probe, Backup Traditional, and Clone
B. Check Connectivity, Clone, and Clone
C. Backup Traditional, Probe, and Clone
D. Check Connectivity, Probe, and Clone
Answer: A

23. Which EMC NetWorker host can belong to multiple data zones?
A. Client
B. Storage Node
C. Server
D. Remote Storage Node
Answer: A

24. What port is required tor NMC access?

A. 443
B. 9000
C. 8080
D. 9090
Answer: B

25. A backup administrator is looking for recent notifications from workflows and actions in a
policy. Where can they find this information?
A. policy_notifications.log
B. policy_log.log
C. policy_log.log
D. workflow_notifications.log
Answer: A

26. Take snapshot

27. A backup administrator wants to configure PSS for a client to have this configuration: 3 PSS
for save set '/data1' 5 PSS for save set '/data2' How can this be achieved?
A. PSS:stream_ss=3,/data1; 5,/data2
B. PSS:streams_per_ss=3,/data1: streams_per_ss=5,/data
C. PSS:streams_per_ss=3,/data1, 5,/data2
D. PSS:streams_per_ss=3,/data1t PSS:streams
Answer: C

28. An administrator needs to find volume and save set information within NetWorker. Where
should they look for this information?
A. Media Database
B. Client File Index
C. Resource Database
D. NMC Database
Answer: A

29. A system administrator has recently performed a recovery of Microsoft Exchange server
using NMM. Where can the administrator check the operation status?
A. NetWorker User for Microsoft application only
B. NetWorker Management Console only
C. NetWorker Management Console and NetWorker User for Microsoft application
D. Application API reporting tools
Answer: C

30. Thaw application

D. 1. Commit writes
31. A company is running an EMC NetWorker server on a UNIX platform and wants to monitor
backup operations from the UNIX command line.
Which utility can be used?
A. nsrwatch
B. nsradmin
C. nsrinfo
D. nsralist
Answer: A

32. What allows Dell EMC NetWorker with CloudBoost to extend on-premises data protection to
the cloud?
A. Backups to the cloud only after first cloning data to a staging server
B. Direct backups to the cloud with the NetWorker Linux and Windows clients
C. DD Boost library for data deduplication before transferring data to the cloud
D. Amazon EC2 and Amazon S3 to enable backups to the cloud
Answer: D

33. How many nsrlcpd processes are running in the EMC NetWorker backup environment
shown in the exhibit?
A. 1
B. 2
C. 3
D. 8
Answer: B

34. In a Dell EMC NetWorker environment, what is a characteristic of Open Tape Format?
A. Supported on DD Boost devices
B. Allows multiplexed, heterogeneous data on the same volume
C. Only one save stream is written to a tape device at a time
D. Backs up only changed blocks
Answer: B

35. Which EMC NetWorker process coordinates all scheduled backups?

A. nsrjobd
B. nsrd
C. nsrindexd
D. nsrmmdbd
Answer: A

36. Refer to the exhibit.

To which EMC NetWorker pool is the client save set backed up?
A. Pool A
B. Pool B
C. Pool C
D. Pool D
Answer: A

37. What is a characteristic of a Dell EMC NetWorker storage node?

A. Provides source data for backups
B. Provides centralized management of NetWorker datazones
C. Maintains tracking and configuration information
D. Reads and writes data to backup devices
Answer: D

38. An incremental backup is performed and combined with the most recent full backup and
subsequent incremental backups to make a new full backup. A non-PowerProtect DD series
appliance is used.
Which backup level is described?
A. Synthetic Full
B. Incremental
C. Virtual Synthetic Full
D. Cumulative Incremental
Answer: A

39. A backup administrator needs to upgrade NVE.

To which folder on the NVE appliance must the upgrade package be copied before starting the
upgrade?
A. /home/avamar/repo/packages
B. /upgrade
C. /data01/avamar
D. /data01/avamar/repo/packages
Answer: D

40. An EMC NetWorker administrator wants to back up Microsoft SQL server using EMC
NetWorker Module for SQL.
What needs to be specified in the Backup command field?
A. nsrsqlsv
B. nsrsnap_vss_save
C. save
D. nsrsqlrc
Answer: A

41. Which backup device type(s) is supported for NMM Exchange backups?
A. AFTD, Data Domain, and tape
B. AFTD and Data Domain only
C. Data Domain only
D. Data Domain and tape only
Answer: B

42. Commit writes

43. Based on the graphic, what is the size of the Dell EMC NetWorker synthetic full backup on
Wednesday?
A. 1.1 TB
B. 1.5 TB
C. 1.65 TB
D. 1.85 TB
Answer: A

44. EMC NetWorker is using a library controlled by an ACSLS server. Information about a tape
volume was accidentally deleted from the media database.
What is run to recover the information?
A. scanner
B. mmrecov
C. jbconfig
D. nsrmm
Answer: A

45. A Dell EMC storage administrator has configured a client snapshot backups using
Networker Snapshot Management. The backup completed successfully and the administrator is
now ready to restore the data.
Which type of restore will destroy all existing data on the target application volume?
A. Snapshot
B. Rollback
C. Restore from rollover
D. Directed
Answer: B

46. Which task is performed by the Dell EMC NetWorker storage node component?
A. Reads the data volume during recovery
B. Generates backups
C. Executes the save command
D. Initiates recoveries
Answer: B

47. Refer to the exhibit.

A Dell EMC NetWorker administrator is monitoring Cloud Tier save sets.

What does the "T" flag in the clone flags column represent?
A. Save set exists on a Data Domain device
B. Save set exists on both a Cloud Tier device and a cloud provider
C. Save set exists only on a cloud provider
D. Save set exists only on a Cloud Tier device
Answer: D

48. In EMC NetWorker, what is a characteristic of a probe-based group backup?

A. Name of the probe script must begin with "nsr" or "save"
B. Probe script must reside on a user-defined directory
C. A group does not allow multiple probes to be run
D. Probe processing occurs throughout the day
Answer: A

49. An EMC NetWorker administrator wants to allow multiple tenants to share a single
NetWorker data zone without purchasing any additional licenses.
What solution will address the administrator’s needs?
A. Restricted Data Zones
B. NetWorker Snapshot Management
C. Client Direct backups
D. Cloud Optimize
Answer: A
50. Which databases can be backed up using a NetWorker with NMM?
A. MongoDB and MySQL
B. Microsoft SQL and Exchange
C. PostgreSQL and MongoDB
D. Oracle and Microsoft SQL
Answer: B

51. A customer has recently purchased a Data Domain appliance to use with EMC NetWorker
as the primary storage. The backup administrator needs to configure EMC NetWorker so that
multiple backups and recoveries can be performed from a single device at any given time.
What type of device should the backup administrator configure?
A. AFTD
B. LTO
C. FTD
D. NFS
Answer: A

52. What is a consideration when using the Dell EMC NetWorker block based backup feature on
Microsoft Windows?
A. An incremental level results in a virtual full backup when using Data Domain
B. Backup storage must be a deduplication device
C. Full and incremental backups must be on different devices
D. No more than 25 incremental backups can be created between full backups
Answer: A

53. An Administrator has deployed the EMC NetWorker server software with clustering. There
are 50 clients and an autochanger with 4 drives controlled by a remote storage node.
What is the path of the backup data from the client to the media?
A. Client C> Storage Node C> Media
B. Client C> Media
C. Client C> Cluster Server C> Media
D. Client C> Cluster Server C> Storage Node C> Media
Answer: A

54. You want to perform a single file recovery from an EMC NetWorker NDMP backup of a
Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.
What recovery must be performed?
A. Directed
B. recover
C. nsrsnap recover
D. nsrndmp_recover
Answer: A

55. What is integrated with NMDA to provide snapshot-based protection for DB2?
A. PowerSnap
B. SnapImage
C. VSS
D. VMware
Answer: A

56. In an EMC NetWorker environment, Auto Media Management is currently enabled on the
autochanger. The customer requires unlabeled volumes in the autochanger to be used before
recyclable volumes are reused.
In addition, the unlabeled volumes need to be automatically labeled before they are used.
How can this be achieved?
A. Disable Auto Media Management and set all labeled volumes to a mode of Manual Recycle.
B. Set all labeled volumes to a mode of Manual Recycle.
C. Set all labeled volumes to a mode of Automatic Recycle.
D. Disable Auto Media Management.
Answer: B

57. Which tool is available to help determine and track source capacity usage in an EMC
NetWorker environment?
A. EMC AMP Utility
B. EMC NetWorker License Manager
C. nsradmin
D. nsrlic
Answer: A

58. On what type of device is a virtual synthetic full backup performed?

A. Multiple PowerProtect DD using DD Boost
B. Cloud Tier using PowerProtect DD
C. ProtectPoint device on PowerProtect DD
D. Single PowerProtect DD using DD Boost
Answer: D

59. What types of IDS logical log backups are supported with NMDA for Informix?
A. Level 1 & Level 2 backup only
B. Automatic (continuous) logical log and manual logical log
C. Level 0 & Level 1 backup only
D. Automatic (continuous) logical log only
Answer: B

60. A customer is adding new tape devices to an EMC NetWorker server. The command is
issued to scan for devices but does not find the new devices.
What is the most likely cause?
A. Devices are not initialized until jbconfig has been initiated.
B. Local device bootstrap has not been configured on the hard drive.
C. Devices have not been added at the OS level.
D. PAX translation mini-driver has not been installed.
Answer: C

61. A Dell EMC NetWorker backup administrator is trying to restore Client A form Client B in the
same datazone. After clicking the "Recover" option using NetWorker User for Windows, the
administrator is not able to see Client A in the source window.
What is the reason for this issue?
A. This type of recovery is not supported
B. Remote access field of Client B is not populated
C. Administrator user must perform the recovery
D. Remote access field of Client A is not populated
Answer: A

62. What is the correct sequence of events in a scheduled backup workflow using Dell EMC
NetWorker Module for Databases and Applications (NMDA)?
Answer:

63. Which EMC NetWorker command line tool is used to modify both the Media database and
client file indexes?
A. nsrmm
B. mminfo
C. nsrim
D. nsrck
Answer: A

64. Which three components comprise EMC NetWorker’s three tier architecture?
A. Server, Storage Node and Client
B. Master Server, Media Server and Client
C. Server, Storage Agent and Client
D. Cell Manager, Devices and Client
Answer: A

65. An EMC NetWorker administrator wants to create a new custom notification. The notification
needs to send an e-mail with a critical severity when a backup failure of a savegroup occurs.
Which attribute causes the notification to be sent when the backup fails?
A. Event
B. Alert
C. Priority
D. Action
Answer: A

66. A backup administrator wants to exclude all user temp directories during backups.
How can this be implemented using EMC NetWorker?
A. Exclude the files using a NetWorker directive
B. Create a backup_exclusion file
C. Specify each file to exclude in the client resource
D. Specify only the files to back up in the client save set attribute
Answer: B

67. An Administrator needs to back up a Windows file server that has a million small files in a
high density file system.
What is the best way to fulfill the Administrator’s requirements?
A. Block level backup using SnapImage
B. Volume level backup
C. Enable client-side compression
D. Increase client parallelism
Answer: A
68. Which EMC NetWorker process keeps a record of TCP/IP port ranges?
A. nsrexecd
B. nsrmmdbd
C. nsrd
D. nsrpm
Answer: A

69. Which EMC NetWorker command line utility is used to view, create, delete, and modify
resources?
A. nsradmin
B. nsraddadmin
C. nsrim
D. winworkr
Answer: A

70. What is a characteristic of an EMC NetWorker advanced file type device?

A. Duplicate media database records
B. Only clones to another advanced file type device
C. Requires CIFS or NFS shares
D. Requires a separate pool
Answer: A

71. What is the effect of disabling Recover Pipe to Save (RPS) on the NetWorker server?
A. Vproxy clones are slower.
B. All clones are slower.
C. VBA restore fails.
D. All clones fail.
Answer: C

72. You have been tasked to move the EMC Net Worker Management Console (NMC) from the
EMC Net Worker server to an alternate server. To utilize the new server as an NMC, what is the
complete list of software that needs to be installed?
A. Client software
Console server software
Java Runtime Environment
B. Console server software
Java Runtime Environment
C. Client software
Console server software
Change Journal Manager software
D. Storage node software
Java Runtime Environment
Answer: A

73. A backup administrator is migrating policies from a VMware Backup appliance to the
NetWorker vProxy appliance.
Which pre-requisite must be met?
A. vCenter server is a minimum of version 5.5.x
B. vProxy version should be 4.x
C. DDOS version should be 5.7.x and later
D. NetWorker server and storage node version should be same
Answer: D

74. An administrator using EMC NetWorker Power edition plans to add a storage node. In
preparation for adding the storage node, they attempt to set server parallelism to 96. When
saving the changes to the configuration, the administrator notices that server parallelism reverts
back to 64.
Which action needs to be taken to set server parallelism to 96?
A. Add a storage node enabler code
B. Set device max sessions to 96
C. Configure group parallelism to 96
D. Enable diagnostic mode
Answer: A

75. An EMC NetWorker administrator must perform a recovery of data from a failed client to a
new client.
Which type of recovery should the administrator use?
A. Directed
B. Browsable
C. Saveset
D. Server Recovery
Answer: A
76. An EMC NetWorker backup administrator wants to monitor a data protection environment
consisting of Avamar, Data Domain, and NetWorker through a single interface. In addition, the
administrator wants the ability to configure Avamar replication through the same interface.
Which EMC tool is recommended?
A. Backup and Recovery Manager
B. Data Protection Advisor
C. NetWorker Management Console
D. Avamar Administrator Console
Answer: A

77. A Dell EMC Networker backup is configured as a probe-based backup.

What must be configured in the workflow for this backup?
Probe and backup actions
Backup and clone actions
Probe action only
Check Connectivity and probe actions
Answer: A

78. A backup administrator is asked to install NWUI on a Linux-based non-NetWorker Server.

Which software package should be used?
A. lgtoclnt-nw-19.2-0.x86_64.rpm
B. lgtoxtdclnt-19.2-0.x86_64.rpm
C. lgtonwui-19.2.x86_64.rpm
D. lgtonwuiserv-19.2.x86_64.rpm
Answer: C

79. Which command must be used to recover the NMC database only?
A. nsradmin
B. nsrdr
C. nsrpolicy
D. recoverpsm
Answer: D

80. When a user logs into the Dell EMC NetWorker Management Console (NMC) server, what
provides token-based verification of NMC and CLI users?
A. AuthC
B. External authentication
C. nsrla
D. nsradmin
Answer: A

81. An EMC NetWorker administrator wants to create a Save Set Summary report and share it
with all console users. In what sequence should this task be completed?
A. Create
Save
Share
B. Create
Share
Save
C. Create
Select users
Save
D. Create
Save
Select users
Answer: A

82. Which are NetWorker modules?

A. NMSQL and NMSAP
B. NMM and NDMP
C. NMDA and NMMEDI
D. NMC and NSM
Answer: C

83. A backup administrator wants to use an mminfo utility to run a query for several save sets
from a NetWorker client running Windows 2019 However, they receive an error that the mminfo
executable is not found.
What is the fastest way to resolve this issue?
A. Install the NetWorker Extended Client package.
B. Use an nsrinfo utility instead
C. Open a case with Dell Support
D. Use a Windows Explorer to find the mminfo.exe file
Answer: A

84. You have an EMC NetWorker backup group containing 10 clients. Each client will be backed
up at either a Level Full, Incremental, or Differential every day. The backup level for each is
controlled by one of five different schedules applied at the client level. The group is used only to
control the start time.
What is the most efficient method to force an immediate Full backup of all clients?
A. Set the Level Override on the group to Full
B. Modify each of the five schedules to perform only Full backups
C. Create a new group, add each client to it, set the Level Override to Full
D. Perform a client-initiated Full backup of each client individually
Answer: A

85. An EMC NetWorker backup administrator needs to do a disaster recovery of the NetWorker
server from a tape containing the metadata required for recovery.
What is the first thing the administrator needs to do?
A. Load and mount the tape
B. Load and scan the tape
C. Load the tape without mount
D. Label and mount the tape
Answer: C

86. Which EMC NetWorker command lists save sets stored on each volume?
A. mminfo
B. nsrinfo
C. nsrmm
D. nsrretrieve
Answer: A

87. When performing a backup of a Microsoft Windows 2008 host, which VSS function does
EMC NetWorker perform?
A. Requests the shadow copy
B. Creates the shadow copy
C. Freezes the activities
D. Maintains the shadow copy
Answer: A

88. Which directory holds the tracking information of each file backed up by the client "tuba" on
EMC NetWorker server "soprano"?
A. /nsr/index/tuba/db6
B. /nsr/tuba/db6
C. /nsr/index/soprano/db6
D. /nsr/soprano/db6
Answer: A

89. What is a characteristic of Dell EMC NetWorker virtual synthetic full backups?
A. No backup data is moved across the network
B. Backup processing occurs on the storage node, bypassing the client
C. Eliminates the need to run traditional full backups
D. Participating save sets must use a deduplication node
Answer: C

90. An EMC NetWorker client has a file system with two files; A and B.
As the NetWorker administrator, you have created a backup schedule for this client consisting of
the following:
- Full back up every Sunday
- Level 2 on Monday
- Level 3 on Wednesday
- Incremental on Thursday
- Level 2 on Friday
File B is changed on Monday, file C is created on Tuesday, file A is changed on Wednesday,
and file D is created on Thursday.
Which files will be backed up on Friday?
A. A, B, C, and D
B. D only
C. A and D only
D. A, C, and D only
Answer: A

91. In Dell EMC NetWorker, what is a requirement when creating an action for the data
movement policy with Cloud Tier devices?
A. Data Domain devices and Cloud Tier devices should be in same media pool
B. NetWorker can configure only one Data Domain Cloud Unit name for the Cloud Tier devices
C. Both source and destination storage nodes must belong to the same Data Domain MTree
D. NetWorker staging to Data Domain Cloud Tier devices should not be used
Answer: C

92. A customer wants to back up two EMC NetWorker clients at the same time every day.
Which NetWorker resource is configured to include both clients?
A. Group
B. Policy
C. Pool
D. Schedule
Answer: B

93. What is used to configure and start the CLP/ELMS license server service on a Linux host?
A. nsrlic
B. nsraddadmin
C. Imgrd
D. LMTools
Answer: D

94. What is a characteristic of a CloudBoost appliance?

A. Standalone product that can back up to the cloud using the CloudBoost plug-in.
B. Managed and configured through the Internet using the Cloud portal interface.
C. Only available as a physical appliance to integrate with a public cloud.
D. Enables Dell EMC storage products to use only public cloud storage solutions.
Answer: C

95. What is used to configure and start the CLP license server service on a Linux host?
A. nsrlic
B. lmgrd
C. LMTools
D. NMC
Answer: B

96. An EMC NetWorker administrator configured a Microsoft Exchange client with the
NetWorker Module for Microsoft (NMM). In which resource is the backup command specified?
A. Protection Group
B. Schedule
C. Client
D. Policy
Answer: C

97. What is a requirement for performing Client Direct backups with the Dell EMC NetWorker
Module for SAP on Oracle?
A. Oracle RMAN channels must be used.
B. Backup must be initiated from SAPDBA.
C. Backup must always be a scheduled backup.
D. Target must be an AFTD or Data Domain device.
Answer: D

98. A Dell EMC Networker administrator is protecting a VMware environment with Networker
vProxy appliances and needs to perform a recovery.
Which recovery method will create a new virtual machine running directly off the backup image?
A. Revert a Virtual Machine
B. Emergency Recovery
C. Virtual Machine Recovery
D. Instant Recovery
Answer: C

99. A Dell EMC backup administrator is setting up a schedule for backups to use the virtual
synthetic full backup feature.
What is the recommended minimum number of full backups to run each year?
A. 0
B. 6
C. 12
D. 24
Answer: B

100. An EMC NetWorker Administrator needs to be able to back up and recover a high density
active file system to the backup devices connected to local or remote storage nodes.
A. Add the SnapImage module
B. Add the NDMP module
C. Add the PowerSnap module
D. Add EMC NetWorker Module for Microsoft Applications
Answer: A

101. Which NetWorker component communicates with AD/LDAP?

A. NetWorker Authentication Service
B. Networker Management Console
C. NetWorker REST API
D. NetWorker Authentication Database
Answer: A

102. Refer to the exhibit.

Based on the save set attribute defined in the EMC NetWorker client properties window, what is
backed up?
A. NMC installation directory
B. NMC database
C. /gst_on_noos1demo01 directory
D. Media database
Answer: B

103. What is a characteristic of a Dell EMC NetWorker online database backup?

A. Uses a vendor specific API to extract data
B. Shuts down the database before backing up the data
C. Used only in an active/passive environment
D. Copies the data to a temporary location before backup
Answer: A

104. Which daemon supports remote execution requests for backup requested by EMC
NetWorker Management Console?
A. nsrfsra
B. nsrexecd
C. nsrjobd
D. nsrd
Answer: A

105. A Dell EMC NetWorker administrator wants to create a custom notification that sends an e-
mail when a backup failure of a specific group of clients occurs.
What is configured to send an e-mail notification?
A. Notification on the protection group
B. Notification at the client level
C. Notification at the senior level
D. Notification for the workflow
Answer: A

106. An administrator added several new LDAP user accounts for backup configuration and
monitoring tasks. The LDAP users have been authenticated in NetWorker Management
Console (NMC).
What must be done so that these tasks can be performed on the Dell EMC NetWorker server?
A. Add the user accounts to the ‘Users’ user group on the NMC server
B. Add the user accounts to the ‘External roles’ field of the user groups on the NetWorker
server
C. Add the user accounts to the ‘Users’ field of the Security Administrators group on the
NetWorker server
D. Add the user accounts to the ‘Registrations’ resource on the NMC server
Answer: A

107. In an EMC NetWorker environment with a single datazone, which EMC NetWorker
software component would you install on hosts that manage backup devices?
A. storage node
B. client
C. server
D. Management Console
Answer: A

108. Bootstrap save set is cloned.

Answer: A

109. Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the
same tape?
A. OTF
B. TAR
C. CPIO
D. ZIP
Answer: A

110. What is a requirement for performing a synthetic full backup?

A. A full backup must be run after every 28 incremental operations
B. A full backup or a synthetic full backup must exist
C. Synthetic full backups must be directed to Data Domain devices
D. All devices used in synthetic full operations must be the same device type
Answer: B

111. If a NetWorker backup is using a dedicated storage node, what is responsible for storing
the tracking information?
A. NetWorker Server
B. NetWorker Storage Node
C. AuthC
D. NMC
Answer: A

112. An EMC NetWorker customer uses a custom schedule for backups and has disabled auto
start in all save groups. Backup reports indicate that a bootstrap backup occurs after each save
group is run.
 What can you do to ensure that only one bootstrap backup occurs daily?
A. Place the NetWorker server in its own group and enable autostart.
B. Run savegrp -O manually for each group.
C. Disable manual saves in the server configuration.
D. Run a savefs -O manually for each group.
Answer: A

More Hot Exams are available.

350-401 ENCOR Exam Dumps

350-801 CLCOR Exam Dumps

200-301 CCNA Exam Dumps

Powered by TCPDF (www.tcpdf.org)