D8R TRACK-TYPE TRACTOR 9EM00001-UP (MACHINE) POWERED BY 3406C E...
Page 1 of 2
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D8R TRACK-TYPE TRACTOR 9EM
Configuration: D8R TRACK-TYPE TRACTOR 9EM00001-UP (MACHINE)
POWERED BY 3406C Engine
Operation and Maintenance Manual
D8R Track-Type Tractor
Media Number -SEBU6891-02 Publication Date -01/04/1999 Date Updated -12/05/2004
i01107744
Radiator Guard Pin Joint - Inspect
SMCS - 7155-040
1. Park on a level surface.
2. Raise the bulldozer blade.
Illustration 1 g00584863
3. Install the magnetic base of a dial indicator on the main frame of the machine. Place the tip of the
indicator on the bottom edge of the radiator guard directly beneath one of the pins.
4. Lower the bulldozer blade. Apply sufficient down pressure in order to raise the front of the
machine off the ground.
5. If the travel of the indicator is more than 1 mm (0.04 inch), replace the pin and replace the
bushing.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 1/21/2010
D8R TRACK-TYPE TRACTOR 9EM00001-UP (MACHINE) POWERED BY 3406C E... Page 2 of 2
6. Check the other three pin locations. Contact your Caterpillar dealer for service.
Copyright 1993 - 2010 Caterpillar Inc. Thu Jan 21 13:53:13 PST 2010
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 1/21/2010
