INCEPTA PHARMACEUTICALS LTD.

(CHEMICAL DIVISION)
NEW SPARE REQUIREMENT FOR CONTROL
PROJECT: PB02-B, PB03 VALVE
Dhankura, Saturia, Manikganj,
LOCATION:
Dhaka, Bangladesh

Sr. No. Description Size FLUID NAME Fail Safe Position

1 Globe Valve 25 NB LPST Fail to close

2 Globe Valve 40 NB LPST Fail to close
3 Globe Valve 50 NB LPST Fail to close
4 Globe Valve 80 NB LPST Fail to close
5 Globe Valve 40 NB CHW, CW, HW & CHB Fail to open
6 Globe Valve 50 NB CHW, CW, HW & CHB Fail to open
7 Globe Valve 80 NB CHW, CW, HW & CHB Fail to open
TOTAL

Freight Cost

Grand Total
 REV. NO.: R1
T FOR CONTROL

DATE: 28/07/24

UNIT PRICE TOTAL PRICE

Required
(BDDE) (BDDE) Remark
Qty (Nos.)
USD USD

2 $ 1,467.70 $ 2,935.40 Spec mentioned in "CV" Sheet

3 $ 1,613.56 $ 4,840.68 Spec mentioned in "CV" Sheet
3 $ 1,626.43 $ 4,879.29 Spec mentioned in "CV" Sheet
1 $ 1,845.22 $ 1,845.22 Spec mentioned in "CV" Sheet
1 $ 1,613.56 $ 1,613.56 Spec mentioned in "CV" Sheet
1 $ 1,626.43 $ 1,626.43 Spec mentioned in "CV" Sheet
3 $ 1,845.22 $ 5,535.66 Spec mentioned in "CV" Sheet

14 $ 23,276.24

$ 600.00

$ 23,876.24
PROJECT: PB02-B, PB03

INCEPTA PHARMACEUTICALS LTD. (CHEMICAL DIVISION)

LOCATION: Dhankura, Saturia, Manikganj, Dhaka, Bangladesh

OPERATING TEMPERATURE
FLUID STATE NATURE OF FLUID OPERATING PRESSURE
PROCESS CONNECTION (Size, LINE SIZE
SR. NO. TAG NO. FLUID NAME (Liquid/ Gas/ Vapour/ (Clear/ Viscous/ Slurry/
Type & Std.) (NB)
Steam) Corrosive/ Sticky) (kg/cm2(g))
(°C)

Min. Nor. Max. Min. Nor.

1 SPARE
LPST Vapor Clear Flanged, 150# 25 - 2.5 2.5 AMB 148

2 SPARE LPST Vapor Clear Flanged, 150# 40 - 2.5 4 AMB 148

3 SPARE LPST Vapor Clear Flanged, 150# 50 - 2.5 2.5 AMB 148
4 SPARE CHW, CW, HW & CHB Liquid Clear Flanged, 150# 40 - 3 4 -30 AMB
5 SPARE CHW, CW, HW & CHB Liquid Clear Flanged, 150# 50 - 3 4 -30 AMB
6 SPARE CHW, CW, HW & CHB Liquid Clear Flanged, 150# 80 - 3 4 -30 AMB
7 Spare LPST Vapor Clear Flanged, 150# 80 3 3.5 3.5 125 150
 IPDS OF CONTROL VALVE

OPERATING FLOW MAX. SHUTOFF MAX.

EMPERATURE LINE THERMAL
(Vapor- kg/hr) PRESSURE IN DIFFERENTIAL
DENSITY VISCOSITY FAIL SAFE POSITION SEAT LEAKAGE INSULATION
CLOSED PRESSURE ΔP Valve Type MATERIAL COMPATIBILITY OF FLUID
(kg/m3) (cP) (Open/ Close) CLASS THICKNESS
CONDITION ACROSS VALVE
(°C) (mm)
(Liquid- m3/hr) (kg/cm2(g)) (kg/cm²(g))
Max. Min. Nor. Max. gm/cc POSITION Body

2.417 @ 2.5 kg/cm2

148 0.0 105 kg/hr 105 kg/hr 2.5 0.25 0.02 Globe Fail to close Class V 35 mm CS
(g)
2.417 @ 2.5 kg/cm2
148 0.0 280 kg/hr 280 kg/hr 4 0.25 0.02 Globe Fail to close Class V 35 mm CS
2.417 @ (g)
2.5 kg/cm2
148 0.0 400 kg/hr 400 kg/hr 2.5 0.25 0.02 Globe Fail to close Class V 40 mm CS
(g)
90 0 9 m3/hr 9 m3/hr 4 0.4 1000 1 Globe Fail to open Class VI 102 mm CS
90 0 14 m3/hr 14 m3/hr 4 0.4 1000 1 Globe Fail to open Class VI 102 mm CS
90 0 36 m3/hr 36 m3/hr 4 0.4 1000 1 Globe Fail to open Class VI 119 mm CS
150 - 1100 kg/hr. 1100 kg/hr. 3.5 Vendor to specify 2.4 0.02 Globe FC Class V 50 CS
 REVISION: R1

VENDOR TO FILL
DATE: 28/07/24

AREA CLASSIFICATION
RIAL COMPATIBILITY OF FLUID (Zone, Gas Group, Temp.
Class) OFFERED VALVE
REMARKS MODEL NO. UNIT PRICE. CALCULATED CV SELECTED CV EQUAL %
SIZE
Wetted Parts

SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN25 $ 1,467.70 25

SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN40 $ 1,613.56 40

SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN50 $ 1,626.43 50
SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN40 $ 1,845.22 40
SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN50 $ 1,613.56 50
SS-304 Zone-1 ,IIA, IIB ,T4 - CV-ZJHP-DN80 $ 1,626.43 80
SS304 Zone-1 ,IIA, IIB ,T5 - CV-ZJHP-DN80 $ 1,845.22 80
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS

1 GENERAL SPECIFICATIONS
1.1 Make
1.2 Model
1.3 Process Data
1.4 Hazardous Area Classification
2 BODY, TRIM & BONNET
2.1 Body form
2.2 Bonnet type
2.3 Stem Extension
2.4 Line Size
2.5 Valve Size
2.6 Body Rating
2.7 Guiding
2.8 Body Material
2.9 Trim Material
2.1 Bonnet Material
2.11 Gland Packing Material
2.12 Seat Type
2.13 Flow characteristics
2.14 Seat leakage class
2.15 Flow Direction
2.16 Process Connection
3 ACTUATOR
3.1 Type
3.2 Model No.
3.3 Fail safe position
3.4 Spring Range
3.5 Spring MOC
3.6 Actuator Diaphragm MOC
3.7 Hand wheel
3.8 Travel Indication
3.9 Air Connection
4 I/P POSITIONER
4.1 Type
4.2 Input Control signal
4.3 Air supply
4.4 Enclosure
4.5 Cable Entry
4.6 Pneumatic Connection

4.7 Electrical Parameters vender to specify

4.8 Make/Model
5 AIR FILTER REGULATOR
5.1 Size
5.2 Input Pressure
5.3 Medium
5.4 Output Pressure
5.5 Output Pressure Gauge
 5.6 Body
5.7 Filter
5.8 Mounting
5.9 Make
5.1 Model
6 CERTIFICATIONS:
6.1 ATEX / IEC
6.2 Emission Requirement Certificate
6.3 IBR Certification
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 CONTROL VALVE - 2 WAY

OUR REQUIREMENT

Vendor to Specify
Vendor to Specify
Refer Attached Annexure
Zone-1 Class IIA IIB Temp Class: T4

Globe, 2 Way
Standard
100 mm
Refer Attached Annexure
Same as Line Size
Refer Attached Annexure
Top
Refer Attached Annexure
Refer Attached Annexure
Refer Attached Annexure
Grafoil / Vendor to specify based on process temperature
Screwed
Equal percentage
Refer the IPDS (as per ANSI/FCI 70-2 2006)
Unidirectional
Refer Attached Annexure (AS PER EN-DIN STD)

Pneumatic spring opposed diaphragm

Vendor to specify
Refer the IPDS
Vendor to specify
Spring Steel
Vendor to specify
Not Required
0 to 100%
¼” NPT (F)

Electro Pneumatic SMART with HART, Intrinsically Safe

4-20 mA DC + HART
1.4 kg/cm2 ± 10%
Weatherproof IP 65, IS Certified for Hazardous area
½” NPT(F)
¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
Siemens- 6DR5210-0EP00-0AA9-R1A
¼" NPT (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
transparent bowl with Manual Drain Facility
Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
necessary SS 316 tubing from regulator to actuator
Shavo
Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)

Required
Not Required
Not Required
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN25
LPST, Max P: 2.5 Bar, Max Temp: 148°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN25
DN25
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to close
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
 Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN40
LPST, Max P: 4 Bar, Max Temp: 148°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN40
DN40
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to close
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN50
LPST, Max P: 2.5 Bar, Max Temp: 148°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN50
DN50
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to close
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN40
CHW, CW, HW & CHB, Max P: 4 Bar, Max Temp: 90°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN40
DN40
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to open
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN50
CHW, CW, HW & CHB, Max P: 4 Bar, Max Temp: 90°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN50
DN50
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to open
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN80
CHW, CW, HW & CHB, Max P: 4 Bar, Max Temp: 90°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN80
DN80
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
Fail to open
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db
 CONTROL VALVE - 2 WAY

SR. NO. SPECIFICATIONS OUR REQUIREMENT

1 GENERAL SPECIFICATIONS
1.1 Make Vendor to Specify
1.2 Model Vendor to Specify
1.3 Process Data Refer Attached Annexure
1.4 Hazardous Area Classification Zone-1 Class IIA IIB Temp Class: T4
2 BODY, TRIM & BONNET
2.1 Body form Globe, 2 Way
2.2 Bonnet type Standard
2.3 Stem Extension 100 mm
2.4 Line Size Refer Attached Annexure
2.5 Valve Size Same as Line Size
2.6 Body Rating Refer Attached Annexure
2.7 Guiding Top
2.8 Body Material Refer Attached Annexure
2.9 Trim Material Refer Attached Annexure
2.1 Bonnet Material Refer Attached Annexure
2.11 Gland Packing Material Grafoil / Vendor to specify based on process temperature
2.12 Seat Type Screwed
2.13 Flow characteristics Equal percentage
2.14 Seat leakage class Refer the IPDS (as per ANSI/FCI 70-2 2006)
2.15 Flow Direction Unidirectional
2.16 Process Connection Refer Attached Annexure (AS PER EN-DIN STD)
3 ACTUATOR
3.1 Type Pneumatic spring opposed diaphragm
3.2 Model No. Vendor to specify
3.3 Fail safe position Refer the IPDS
3.4 Spring Range Vendor to specify
3.5 Spring MOC Spring Steel
3.6 Actuator Diaphragm MOC Vendor to specify
3.7 Hand wheel Not Required
3.8 Travel Indication 0 to 100%
3.9 Air Connection ¼” NPT (F)
4 I/P POSITIONER
4.1 Type Electro Pneumatic SMART with HART, Intrinsically Safe
4.2 Input Control signal 4-20 mA DC + HART
 4.3 Air supply 1.4 kg/cm2 ± 10%
4.4 Enclosure Weatherproof IP 65, IS Certified for Hazardous area
4.5 Cable Entry ½” NPT(F)
4.6 Pneumatic Connection ¼” NPT (F)
Wattage:
In Rush Current :
Min. operating current :
4.7 Electrical Parameters vender to specify Min. operating voltage :
Plunger drop out :
Safety Parameters:
Entity Parameters:
Rotex Model – RTX-7-5-1-2R-H-4R-A
4.8 Make/Model
Siemens- 6DR5210-0EP00-0AA9-R1A
5 AIR FILTER REGULATOR
5.1 Size ¼" NPT (F)
5.2 Input Pressure Max. 7 Kg/cm2 (g)
5.3 Medium Air
5.4 Output Pressure 0-6 Kg/cm2 (g), adjustable
5.5 Output Pressure Gauge 2” Dial, 0-7 Kg/cm2 (g) range
Aluminium with transparent slots or Polycarbonate
5.6 Body
transparent bowl with Manual Drain Facility
5.7 Filter Sintered Bronze, 5 micron
Vendor to mount regulator on valve actuator and do
5.8 Mounting
necessary SS 316 tubing from regulator to actuator
5.9 Make Shavo
5.1 Model Shavo Model 11-4S-N201M-M6KA-NN ( METAL BOWL)
6 CERTIFICATIONS:
6.1 ATEX / IEC Required
6.2 Emission Requirement Certificate Not Required
6.3 IBR Certification Not Required
1. Actuator sizing to be done at 3.5 bar
Note:
air pressure
2. Noise level must be <85 Db
 VENDOR TO FILL

FT-Tech, China
CV-ZJHP-DN80
LPST, Max P: 3.5 Bar, Max Temp: 150°C
EX ia-IIC T4 Ga

Globe, 2 Way
Standard
100 mm
DN80
DN80
150#
Top
WCB
SS304
WCB
GRAPHITE
Welding
Lining
ANSI/FCI 70-2 2006 CLASS IV
Unidirectional
ASME B16.5 150LB

Diaphragm SINGLE SPRING TYPE

Zhengtai Dianqi
FC
20-100 kpa (Standard)
Spring Steel
Ethylene propylene Rubber clip nylon
WITHOUT HANDWHEEL
0 to 100%
¼”G (F)
SMART TYPE with HART 7 , Intrinsically Safe BRAND:POWER
FLOW, CHINA
4-20 mA DC + HART
 WITHIN 4 BAR /kg/cm2
IP66, ,IS Certified for Hazardous area
½” G (F)
¼”G (F)
MAX input 0.66W
0.03 Amp Max
MINI input 3.8mA
MAX input 28V

Near to 0
Near to 0
MODEL:IP6000 LINEEAR-SINGLE ACTION EXIX PROOF-FEEDBACK-
LINEAR SET SAFE , BRAND POWER FLOW .

¼" G (F)
Max. 7 Kg/cm2 (g)
Air
0-6 Kg/cm2 (g), adjustable
2” Dial, 0-7 Kg/cm2 (g) range
Aluminium
Sintered Bronze, 5 micron
SS304 Tubing
DELIXI, China
UTU CA-188

ATEX CERT. FOR POSITONER

N/A
N/A
3.5 BAR OK FOR AIR WORKING
Noise level will be <85 Db