Technical Data Sheet
Previous Name: Shell Morlina Oils
• Reliable Protection
Shell Morlina S2 B 150 • Industrial Application
• Water Shedding
Industrial Bearing & Circulating Oils
Shell Morlina S2 B oils are high performance oils designed to provide outstanding oxidation and water separation
protection for most general industrial bearing and circulating oil system applications and certain other industrial
applications which do not require oils with extreme pressure (EP) properties. These oils meet the requirements of the
Morgan Construction Company and Danieli for common bearing oils.
Performance, Features & Benefits · Roll-neck bearings
· Long oil life – Maintenance saving · Enclosed industrial gear systems
Shell Morlina S2 B oils are formulated with a well proven rust Low or moderately loaded enclosed gears where EP
and oxidation inhibitor additive package that helps provide performance is not required.
consistent performance and protection throughout the
Specifications, Approvals & Recommendations
maintenance interval.
· Morgan Morgoil® Lubricant Specification New Oil (Rev. 1.1)
· Reliable wear & corrosion protection (Morgoil is a registered trademark of the Morgan Construction
Shell Morlina S2 B oils help prolong the life of bearings and
Company)
circulating systems through:
- Excellent water separation characteristics that helps ensure
· Danieli Standard Oil 6.124249.F
that critical oil films are retained between highly loaded parts. · DIN 51517-1 – type C
- Good air release characteristics to minimize cavitation and · DIN 51517-2 - type CL
For a full listing of equipment approvals and recommendations,
associated damage to circulating pumps.
please consult your local Shell Technical Helpdesk, or the OEM
- Helps protect against corrosion, oxidation, and emulsion
Approvals website.
formation, even in the presence of water.
Compatibility & Miscibility
· Maintaining system efficiency
Shell Morlina S2 B oils are blended with high quality, solvent · Paint Compatibility
refined base oils that promote good water separation and air Shell Morlina S2 B oils are compatible with seal materials and
release to ensure the efficient lubrication of the machines and paints normally specified for use with mineral oils.
systems.
Main Applications
· Machine circulation systems
· Oil lubricated bearings
Suitable for most plain and rolling element bearings and
general industrial applications.
Page 1 of 4 Shell Morlina S2 B 150, v 2 20.05.2013.11.05
Typical physical characteristics
Properties Method Shell Morlina S2 B
ISO Viscosity Grade ISO 3448 150
Kinematic Viscosity @40°C mm²/s ASTM D445 150
Kinematic Viscosity @100°C mm²/s ASTM D445 15
density @15°C kg/m³ ISO 12185 887
Viscosity Index ISO 2909 95
Flash Point (COC) °C ISO 2592 262
Pour Point °C ISO 3016 -15
Rust, Distilled Water ASTM D665A Pass
Emulsion Test - @82°C (Unless specified by *) Mins ASTM D1401 20
Oxidation Control Test : Tost Hrs ASTM D943 1300+
Oxidation Control Test : Rbot Mins ASTM D2272 400+
Foam Test, Seq II ml foam at 0/10 ASTM D892 10/0
mins
· These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur. *@54°C
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your shell representative.
Page 2 of 4 Shell Morlina S2 B 150, v 2 20.05.2013.11.05
Page 3 of 4 Shell Morlina S2 B 150, v 2 20.05.2013.11.05
Page 4 of 4 Shell Morlina S2 B 150, v 2 20.05.2013.11.05
