SCHEDULE

INDONESIAN PLAXIS ADVANCED COURSE 2022

PRE TRAINING DAY, Sunday, 11 December 2022 Bali - Indonesia, 11-16 December 2022

Review and monitoring of Plaxis projects

- Introduction to Plaxis 2D Connect
- Introduction to Plaxis 3D Connect
Day 1, Monday, 12 December 2022
- Geotechnical Finite Element Modelling

Numerical modeling and analysis

- Linear Elastic Perfect Plasticity Model and Mohr-Coloumb Criterion
- Nonlinear Computation
- Critical State Soil Mechanics and Soft-Soil Model
- Hardening Soil and HS-small Mod
Day 2,Tuesday, 12 December 2022
- Structural Elements in PLAXIS – Update required
- Undrained Condition and Consolidation Analysis
- Modelling of Groundwater in PLAXIS

In house training
- Concrete Model & applications
- Modelling of Excavations in 2D and 3D-

For information contact : www.plaxis.com

Day 3, Wednesday, 13 December 2022
- Initial Stresses, Slope Stability Analysis
- Embedded Beams (3D), Embedded Beams with interaction surface and
Embedded Beam Rows - Update
- Modelling of Ground Improvement using Full Displacement Column (FDC)
Case Study: Padang Sicincin Toll Road (Tentative)
- Modelling of Deep Foundations
- Modelling of Ground Improvements

Ü
Ü
Ü
Day 4,Thursday, 14 December 2022
- Modeling of dynamic problems
- Soil properties and damping
- Modelling of Dynamic problems with Plaxis
- Earthquake engineering using FEM
- Soil-structure interaction
- Modelling of liquefaction
Day 5, Friday, 15 December 2022
- Modelling of Low Strain Integrity Testing on Retaining Wall (Tentative)
- Numerical Modelling of Soft Soils (special focus on embankments & deep excavations)

Dates 11-16 December 2022

Sponsored by:
Location Bali Tropic Resort & Spa
Jl. Pratama 34A, Tanjung Benoa, Nusa Dua, Bali, Indonesia

PT. Delta Sigma Nusantara

www.balitropic-resort.com
Course Leader Prof. Helmut Schweiger (Graz University of Technology, Austria)
Lecturers Prof. Helmut Schweiger (TU Graz, Austria)
Assoc.Prof. Dipl.Ing. Dr.techn. Franz Tschuchnigg (TU Graz, Austria)
Prof. Juan Pestana (University of California, Berkeley, US)
Prof. Masyhur Irsyam (Institut Teknologi Bandung, Indonesia)
Prof. Widjojo Prakoso (University of Indonesia, Indonesia)
Dr. William Cheang (Bentley Systems)
Dr.techn. Indra Noer Hamdhan (Itenas Bandung, Indonesia)
Ikhya S.T., M.T., M.M. (Itenas Bandung, Indonesia)
Trainers Dr. William Cheang (Bentley Systems)
Assoc.Prof. Dipl.Ing. Dr.techn. Franz Tschuchnigg (TU Graz, Austria) Graz University of Technology

Dr.techn. Indra Noer Hamdhan (Itenas Bandung, Indonesia)

Ikhya S.T., M.T., M.M. (Itenas Bandung, Indonesia)
Asistant Trainers Desti Santi Pratiwi, S.T., M.T. (Itenas Bandung, Indonesia)
Rinaldy Alamsyah, S.T., (Itenas Bandung, Indonesia) essential for geotechnical professionals
 INTRODUCTION
The course brings together experts and analysts from across the region.This computational
REGISTRATION geotechnics course is tailored for engineers and researchers seeking knowledge on the use of
Plaxis. Discover new potentials for effective and confident usage of Plaxis Finite Element
Codes within your professional organisation.
In order to register, please send the following information
to the course organiser SCOPE
In this course, you will learn advanced techniques and solutions from experts from Plaxis and
partner academic institutions. Plaxis numerical analysts will have the opportunity to further
Titles and Name :
develop their understanding of Plaxis Code's extensive range of capabilities.
Dwi Susanto
FORMAT
Organization : The course starts with registration on 11 December 2022. The course consists of intensive
PT. Wijaya Karya Persero Tbk. session blocks and each block is made of two full 45 min lectures and a 60 min exercise with
full tutoring. COURSE FEE
Address :
SOFTWARE Registration:
Jl. D.I. Panjaitan Kav. 10, Jakarta 13340
Exercises and case studies are based on Plaxis software. PLAXIS 2D is a user friendly Ü Local Participant : 7.500.000 IDR (1 Aug - 31 Oct 2022)
computer program that is used by geotechnical engineers worldwide for deformation 8.500.009 IDR (1 Nov - 11 Dec 2022)
calculations, stability assessment and consolidation analysis. It contains special options for soil
structure interaction, has a fully automatic mesh generator based on graphical input of soil-
Ü Intertional Participant : 800 USD
Country : layer geometries and several features to facilitate input and analysis of complex situations. In Ü The course fee includes a full set of instruction materials and the use of a computer.
addition PLAXIS 3D is used for the introduction into 3D finite analysis of complex problems. The participants are asked to bring their own Notebook or Laptop. The course fee does not
Indonesia
cover accommodation.
HOTEL
E-mail :
The venue for the course is the Bali Tropic Resort & Spa, Bali, Indonesia. Please contact the
[email protected] BENEFITS
course secretariat for a list of hotels around the venue of the course. During registration
After the course, participants will receive an official letter/certificate about the number
please select the relevant dates for your hotel reservation. Each participant will be required to
Telephone and Faximile : of Professional Development Hours (PDH) they have earned from this course.
pay the hotel directly upon departure.
+6281311583067
LECTURES
Prof. Helmut F. Schweiger (Graz University ofTechnology - Austria) Prof. Juan M. Pestana (University of California, Berkeley - US)
Signature : Prof. Helmut F. Schweiger established the Computational Geotechnics Group at the Institute of Soil Pestana is Professor Emeritus from the Civil and Environmental Engineering Department at the University
Mechanics, Foundation Engineering and Computational Geotechnics of the Graz University of Technology of California at Berkeley and is currently a Senior Principal for Geosyntec Consultants in Acton,
in Austria in 1995 and has over 25 years of experience in developing and applying numerical methods in Massachusetts. He has nearly 35 years of consulting experience in Geotechnical and Geotechnical
geomechanics. In 2019 he retired ”formally” from university but he is still active in research and various Earthquake Engineering. He has worked extensively on numerical modeling and analysis for a wide range of
technical committees. Helmut obtained his Ph.D from the University College of Swansea, United Kingdom applications including levees, dams, buildings, bridges and tunnels under static and seismic conditions. He
and teaches courses on Advanced Soil Mechanics and Computational Geomechanics at the Graz University served as Program Manager at the National Science Foundation for the Geoenviromental Engineering and
of Technology, Austria. He has over 15 years of experience in development and application of the finite Geohazards Mitigation Program, as Director of the UC Berkeley Pavement Research Center in Richmond,
element method. As a member of several committees Helmut is involved in formulating guidelines and CA and as member of the Committee on Geological and Geotechnical Engineering, of the National
COURSE SECRETARIAT recommendations for the use of finite elements in practical geotechnical engineering. Academies among others. He continues to serve in technical committees and organizations, including
ASCE, BSCE, and the GeoInsitute
Nasional Institute of Technology (Itenas) Prof. Masyhur Irsyam (Bandung Institute of Technology, Indonesia)
Civil Engineering Department Masyhur Irsyam is a Profesor in the Faculty of Civil and Environmental Engineering, Bandung Institute of Dr.William Cheang Wai Lum (Bentley System)
Jl. P.K.H. Hasan Mustafa No. 23 Technology, Bandung, Indonesia. He graduated from the University of Michigan, USA in 1991. Irsyam has William is currently a Principal Geotechnical Consultant in Plaxis AsiaPac. He received his BEng (Hons) and
Bandung 40124, West Java, Indonesia specialties in the areas of seismic hazard analysis, soil improvement, and foundation engineering. He has MSc in Civil Engineering from the University of East London. He holds a Ph.D from the National University
t: +62 227272215 (ext 164), f: +62 227202892 been involved as a geoetechnical expert in main infrastructure projects in Indonesia and he is currently of Singapore. His interest is in Computational Geotechnics. He lectures around Asia on the use of Plaxis
conducting research to revise the Indonesian seismic hazard map. He had been serving as the head of finite element codes and a member of the Plaxis Expert Service team. He has been involved with Plaxis finite
e: [email protected] element codes since 2000
Geotechnical Engineering Division of Bandung Institute of Technology.
Contact Person:
Indra Noer Hamdhan (+62(0)8122334533) Assoc.Prof. Dipl.Ing. Dr.techn. Franz Tschuchnigg, (Graz University of Technology -
Prof. Widjojo Prakoso (University of Indonesia, Indonesia)
Austria)
Dr. Prakoso is a member of the teaching and research staff, as well as the Head of Geotechnical
Franz is Head of the Computational Geotechnics Group at the Institute of Soil Mechanics, Foundation
PAYMENT METHOD Engineering Laboratory, at the University of Indonesia. He did his undergraduate work at the University
Engineering and Computational Geotechnics of the Graz University of Technology in Austria. Franz studied
Direct Bank Transfer to the following account: of Indonesia and received his BEng in Civil Engineering with an emphasis in structural engineering in
civil engineering in Graz and works since 2006 in the Computational Geotechnics Group of Graz
1993. From 1996 to 2001, he pursued graduate studies at the School of Civil and Environmental
Bank Name : BNI University of Technology. He is expert in 3D finite element modelling and his main research topic is related
Engineering of Cornell University, Ithaca, NY, USA. His master’s thesis focused on the design method
Branch/Bank Address: Perguruan Tinggi Bandung to deep foundations focusing on the improvement of the embedded pile formulation in Plaxis 3D
development of a novel foundation system, while his doctoral dissertation concentrated on using the
Account Number : 0308333555 Foundation and pile soil interactions. Since 2007 he is also involved in consulting and carried out numerical
reliability theory to better design foundations on and in rock masses. Prof. Widjojo currently serves as
analysis for a couple of high rise buildings in Europe.
Account Name : Indra Noer Hamdhan the head of Indonesian Society of Geotechnical Engineering (ISGE).
Swift Code : BNINIDJAXXX Dr. techn. Indra Noer Hamdhan, S.T., M.T. (Itenas Bandung, Indonesia)
Ikhya, S.T., M.T. , M.M. (Itenas Bandung, Indonesia) Indra is a Geotechnical Lecturer in the Civil Engineering Department, National Institute of Technology
Ikhya is a Geotechnical Lecturer in the Civil Engineering Department, National Institute of Technology (Itenas), Bandung, Indonesia. He graduated from the Graz University of Technology, Austria in 2012. His
REGISTRATION (Itenas), Bandung, Indonesia. Currently, he takes postgraduate in Graz University of Technology, Austria. His main research topic is related to slope stability using numerical method. He gave lectures related to soil
To register for the course please complete the main research topic is related to ground improvement using numerical method. He gave lectures related to mechanics and foundation engineering in Civil Engineering Department, National Institute of Technology,
registration form and send it to the course secretariat, soil mechanics and foundation engineering in Civil Engineering Department, National Institute of Bandung. He had been serving as the head of Civil Engineering Departement in National Institute of
including the proof of bank transfer. Technology, Bandung. Technology (Itenas) Bandung.