Scribd
Upload
34 views1 page

Paint Spec - Corroblast - 041023 Steel Structure

Uploaded by

Amnani Alias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
34 views1 page

Paint Spec - Corroblast - 041023 Steel Structure

Uploaded by

Amnani Alias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PAINTING SPECIFICATION

PROJECT STEEL STRUCTURE


CLIENT CORROBLAST SOLUTIONS SDN BHD
DATE 04/10/2023

PAINT SYSTEMS

Area Description Surface Area (m2)


1. Steel Structure First Coat Zinc Chromate Primer Alk Zinc Chromate Primer 4,221
Second Coat Epoxy MIO Epogarde Intracoat MIO
Finish Coat Epoxy MIO Epogarde Intracoat MIO

Total Surface Area 4,221

AREA 1 - STEEL STRUCTURE Area size 4,221 m2

Surface Preparations
Steel surfaces should be properly grit blasted to SSPC-SP 10 or swedish standard Sa 2.5. Any contamination should be air blown or solvent cleaned if oil grease is
found.

Product name Coats Colour Volume Loss WFT DFT TSR PSR Pot Life Touch Hard Area Volume
Solids Factor (µm) (µm) (m2/lt) (m2/lt) 30oC Dry Dry Size (lt)
(%) (%) 30oC 30oC (m2)
1. Alk Zinc Chromate Primer FC Grey Green 60 40 125 75 8.00 4.80 N/A 30 mins 4 hrs 4,221 879
2. Epogarde Intracoat MIO FC Dark Grey 80 40 63 50 16.00 9.60 6 hrs 1 hr 4 hrs 4,221 440
3 Epogarde Intracoat MIO FC Dark Grey 80 40 63 50 16.00 9.60 6 hrs 1 hr 4 hrs 4,221 440

Total DFT 175 Total Volume 1,759

The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or
specifically defined conditions and said Information is correct to the best of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the
Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do not guarantee the accuracy, completeness or appropriateness
of the Information when the Product is used in those conditions. Unless otherwise agreed in writing, all products supplied and technical advice given by us are subject to our terms and
conditions of sale.

www.gallantpaint.com

Pages: 1 of 1

You might also like