EN-US
New question
Recent
My stuff
Study tools
Perks
Honor Code
Any follow-up questions?
Your Privacy Choices
Do Not Sell My Info
Instant responses come from subject-matter experts, AI models trained on Chegg's learning content, or OpenAI.
Automated chats are recorded & may be used to improve your experience. Please don’t share sensitive info.
© 2003-2024 Chegg Inc. All
rights reserved.
Show Image Transcript
Here's the best solution from Chegg's library
Solution 100% (71 ratings)
Solution ::
step 1
The Ideal Reheat Rankin cycle operating between the given
conditions is shown below.
step 2
Pressure at the inlet of the high-pressure turbine
Temperature at the inlet of the high-pressure turbine
Pressure at the inlet of the low-pressure turbine
Temperature at the inlet of the low-pressure turbine
Condenser Pressure
Mass ow rate
Calculate the properties of water at each state in the cycle:
State1:
From the saturated water pressure table
And saturated liquid, at these conditions
State 2:
Pressure at the inlet of the high-pressure turbine at pressure
15000 kPa.
Calculate the work done in the compression process.
Enthalpy at state 2 is
step 3
Calculate the power used by the pump.
step 4
At state 3:
From the superheated water
And
State 4:
From the saturated water pressure table
At state 5:
From the superheated water.
By using interpolation,
State 6:
From the saturated water pressure table
step 5
Net power output is given by,
Therefore, the power produced by the cycle is
step 6
Calculate the rate of heat transfer in the re-heater.
Therefore, the rate of heat addition in the re-heater is
step 7
Rate of heat transfer is given by,
Efficiency of the cycle is given by,
Therefore, the thermal efficiency of the cycle is .
Your rating is valuable for me please give positive rating it will
help me ❣🙏
Was this solution helpful? 71 10
More matches
Q: 10-36 An ideal reheat Rankine cycle with water as the
working uid operates the boiler at 15,000 kPa, the
reheater at 2000 kPa, and the condenser at 100 kPa. The
temperature is 450^∘C at the entrance of the high-pressure
and low-pressure turbines. The mass ow rate through t…
Get the solution
Not what you’re looking for?
Submit your question to a subject-matter
Send to expert
expert.
You have 20 expert questions left.
Q: An ideal reheat Rankine cycle with water as the working
uid operates the boiler at 30,000 kPa, the reheater at
2000 kPa, and the condenser at 100 kPa. The temperature
is 450°C at the entrance of the high-pressure and low-
pressure turbines. The mass ow rate through the cycle i…
Get the solution
Q: 10-36 An ideal reheat Rankine cycle with water as the
working uid operates the boiler at 15,000 kPa, the
reheater at 2000 kPa, and the condenser at 100 kPa. The
temperature is 450^∘C at the entrance of the high-pressure
and low-pressure turbines. The mass ow rate through t…
Get the solution
Q: An ideal reheat Rankine cycle with water as the working
uid operates the boiler at 15,000 kPa , the reheater at
2000kPa , and the condenser at 100kPa . The temperature
is 450deg C at the entrance of the high-pressure and low
pressure turbines. The mass ow rate through the cycle i…
Get the solution
What would you like to do next?
Send to expert Explore Learning Lab
You have 20 expert questions left.
