P.T.

Weir Minerals Indonesia

Jl. Mulawarman No.020 RT.020 Manggar
Balikpapan 76116 - East Kalimantan Phone

T +62 542 746098

F +62 542 746099
www.weirminerals.com

TECHNICAL

Weir Minerals Indonesia Commercial in Confidence P a g e |8

 P.T. Weir Minerals Indonesia
Jl. Mulawarman No.020 RT.020 Manggar
Balikpapan 76116 - East Kalimantan Phone

T +62 542 746098

F +62 542 746099
www.weirminerals.com

Standard Inclusions
General

▪ Heavy duty, solids handling dewatering pump

▪ Close coupled pump assembly ensuring
accurate pump alignment
▪ Reliable automatic vacuum pump priming
system
▪ Built to withstand harsh dewatering conditions
▪ Compact heavy duty base with inbuilt baffled
fuel cell
▪ Pump unit base designed for various mounting
options
▪ Heavy duty engine canopy
▪ Lift points (2)
▪ Two-pack epoxy paint system
▪ Pump shaft fitted with a Stainless Steel shaft sleeve
▪ Steel battery box with a vented lid
▪ Fire extinguisher mount
▪ Comprehensive installation, operations and spare parts manual

Pump

▪ Multiflo® 100MV single stage centrifugal bare shaft pump

in AS 2074 H7A Cast Stainless Steel materials with grease
lubricated bearings
▪ Gland packed
▪ DN250 suction, DN200 discharge
▪ Close coupled
▪ Maximum 1,800RPM

Weir Minerals Indonesia Commercial in Confidence P a g e |9

 P.T. Weir Minerals Indonesia
Jl. Mulawarman No.020 RT.020 Manggar
Balikpapan 76116 - East Kalimantan Phone

T +62 542 746098

F +62 542 746099
www.weirminerals.com

Engine

▪ Caterpillar® C13 310 kW diesel engine

▪ Exhaust system heat shielding
▪ Air filter fitted with pre-filter

Priming System

▪ Automatic ball float priming system

▪ Rotary vacuum pump
▪ Carbon Steel priming tank with DN250, Table E flange connection
▪ Vacuum gauge
▪ Vacuum line water trap

Electrical

▪ 24V electrical system

▪ Kensho K37 electronic control panel, mounted in
an IP66 Stainless Steel enclosure
▪ Starter motor and battery isolators LOTO
▪ LED flashing amber light
▪ LED work lights (2)
▪ Two emergency stops
▪ Low flow switch

Discharge

▪ Single DN200, Table E, Stainless Steel discharge pipe

▪ DN200 Multiflo NRV-200 non return valve
▪ DN200 Bray S30H isolation valve
▪ DN50 Pacific SB drain valve

Weir Minerals Indonesia Commercial in Confidence P a g e | 10

 P.T. Weir Minerals Indonesia
Jl. Mulawarman No.020 RT.020 Manggar
Balikpapan 76116 - East Kalimantan Phone

T +62 542 746098

F +62 542 746099
www.weirminerals.com

Additional Options
Standard Options

☒ Suction Strainer Stainless Steel

☒ Double Discharge – Stainless Steel

☒ Full Stainless-Steel Suction and Discharge

☒ Mining Rubber Suction Hose (DN250, Table E, 5m)

☒ Suction Boom Kit

☒ Discharge Pressure Transmitter

☒ Jump Start Terminals

☒ Fire Extinguisher

☒ Hydrau-Flo® – Fast Fill, Non-Pressurised Fuel System

☒ Highwall float fuelling

☒ Additional LED Work Lights (2)

☒ Engine Oil Drain Hose (To Service Panel)

☒ Coolant Fast Fill Connection

☒ Auto Matic - Grease Distribution System and Gland Oil tank

Weir Minerals Indonesia Commercial in Confidence P a g e | 11

 P.T. Weir Minerals Indonesia
Jl. Mulawarman No.020 RT.020 Manggar
Balikpapan 76116 - East Kalimantan Phone

T +62 542 746098

F +62 542 746099
www.weirminerals.com

Mounting Options
Bolt-On Push Bar

☒ Push bar INCLUDED

The heavy duty, bolt on, dozer push bar can be added to the
unit for increased manoeuvrability. The design allows for the
unit to be both pushed and towed around mine sites.

Pontoon

☒ 10T Pontoon

For pond dewatering applications, the pontoon mounting option is available. The pontoon is fabricated in three
separate sections for effective containerisation and incorporates multiple pressure tested floatation cells. This
design significantly reduces the risk of hull rupture affecting stability of the pump unit. The pontoon deck is self-
draining and fabricated from 6mm floor plate to provide a non-slip surface. Additional features of this mounting
option include: access stairs, heavy duty pushbar, four mooring bollards, lift points, 16mm wear plates, hand
rails, self-closing gate, tow ropes and two life saver rings.

Weir Minerals Indonesia Commercial in Confidence P a g e | 12

 RF100MV
SN : RF100MV-C130000002
 Pontoon P10T
SN : MFI-P10T-SAT-210008751-01.33
Multiflo® RF-100MV Dewatering Pump Unit
Technical Specifications Minerals


Features
• Heavy duty, solids handling
dewatering pump
• Close coupled pump assembly
ensuring accurate pump alignment
• Auto vacuum pump priming system
• Built to withstand harsh dewatering
conditions
• Compact heavy duty pump unit
base with inbuilt baffled fuel cell
• Heavy duty engine canopy
• Lift points (2)
• Two-pack epoxy paint system
• Pump shaft fitted with a stainless
steel shaft sleeve
• Comprehensive installation,
operations and spare parts manual

Medium volume flow at high heads Standard Inclusions

• Stainless steel bare shaft pump
The new diesel driven Multiflo® RF dewatering pump unit incorporates a robust, heavy duty
base which features an auto vacuum priming system and an integrated skid, all within a • Caterpillar** C13 diesel engine
compact design.
• Skid runners fitted with 16mm wear
The RF range has been developed to operate in harsh environments and is suited to plates
mining, quarrying, industrial, water transfer and environmental water management
applications. • Kensho** electronic control panel

The Multiflo® model 100MV bare shaft pump is a heavy duty, solids handling dewatering • Stainless steel, heavy duty
pump capable of producing medium volume flow at high heads while maintaining high non-return valve
efficiency. • Auto vacuum priming system
The Multiflo RF-100MV pump unit provides a wide range of standard inclusions and a
®
• Exhaust system heat shielding
comprehensive selection of optional features to suit your dewatering needs.
• LED flashing amber light
• LED work lights (2)
• Two emergency stops
• Starter motor and battery isolators
• Vented steel battery box with lid
• Low flow protection
• Fuel gauge
• Engine oil drain

Above: Multiflo® 100MV stainless steel bare shaft

pump
Options Operating curve

• Caterpillar** C9 diesel engine

• Caterpillar** C11 diesel engine
• Cummins** QSM11 diesel engine
• Galvanised suction strainer
• Hydrau-Flo® fast fill, non pressurised
fuel system
• Double discharge
• Full stainless steel suction and
discharge arrangements
• Linatex® suction hose and boom kit
• Booster arrangement
• Suction and discharge pressure
gauges
• Telemetry
• Auto start/stop Technical data

• Jump start terminal Dry Weight 5500kg

• Fire extinguisher Passage Size 33mm

• Highwall float fuelling Shaft Sealing Gland packed

• LED work lights (4 or 6) Engine Type Caterpillar** C13

• Flow meter Engine Power 310kW

• Bolt-on pushbar Material - Casing and Impeller AS 2074 H7A cast stainless steel
• Pontoon Material - Shaft E05 - 1045 carbon steel

Material - Shaft Sleeve C23 - 316 stainless steel

Non-standard options
(available on request) Unit Connections
• Bunded fuel base
Suction
• Sound attenuated canopy
DN 250mm
• Additional customised options
Flange Specification Table E

Discharge

DN 200mm

Flange Specification Table E

2596

4141 2299

Copyright © 2018, Weir Minerals Australia Ltd. All rights reserved. MULTIFLO and HYDRAU-FLO are trademarks and/or registered
NOTE: FOR DRAWING, FABRICATION AND ASSEMBLY STANDARDS REFER TO
WEIR MINERALS MULTIFLO ENGINEERING DEPARTMENT STANDARDS AND PROCEDURES.
-
-
-
-
trademarks of Weir Minerals Australia Ltd; LINATEX is a trademark and/or registered trademark of Linatex Limited; WEIR and
-

MASS: 5328.6 kg
- -
-
-
-
-
WELD CAT.
FINISH CODE

Weir Minerals -
-
-
-
WEIR (logo) are trademarks and/or registered
DO NOT SCALE trademarks of Weir Engineering Services Ltd. Certain features of the technology
IF IN DOUBT - ASK
-
-
-
-
-
-
-
- RF-100MV
Copyright © Weir Minerals Australia Ltd. 2017
Weir Minerals Austalia Ltd. ("the Company") is the owner of the copyright and all confidential information in this drawing.
The drawing must not be copied in whole or in part, in any form or by any means, and the information in it must not be
disclosed to any person, or used for any purpose other than the specific purpose for which it has been provided,
SCALE
DESIGN
0.04 : 1 U.N.O.
J.A 22.11.16
3rd ANGLE PROJECTION U.N.O.
DRAWING STATUS
A3

featured in this publication may be protected by pending and granted patents in the name of The Weir Group PLC and/or one of
without the prior written consent of the Company.

- - - - - - MULTIFLO
®

DRAWN A.R 18.05.17 WORK IN PROGRESS

TOP LEVEL ASSEMBLY
MINE DEWATERING SOLUTIONS
Mine Dewatering Solutions
HYDRAU-FLO
®
15 Dacmar Road Coolum Beach, QLD 4573 Australia
00 APPROVED FOR CONSTRUCTION AS PER APPROVALS CHECK - - Drawing Number REV
its subsidiaries. ** CATERPILLAR, CUMMINS and KENSHO are not trademarks belonging to any company forming part of The
Safety Solutions for Liquid Filling Telephone: +617 5449 3000 Facsimile: +617 5446 4304
MF256564 P0
®
ASPIR
No. Description DWN CHK APPD DATE Coal Processing Solutions Email: [email protected] Web: www.weirminerals.com APPD - - SHEET 1 OF 1

[email protected] Weir Group PLC. WMD0694/012018

www.minerals.weir
 Horizontal Pump
250/200 100MV
CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (Australian Standard AS 2417-2001 unless otherwise specified). For media other than water, corrections must be
made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame suitability must be
checked for each duty and drive arrangement. Not all frame alternatives are necessarily available from each manufacturing centre.
150 Pump
Power ratings supplied are nominal for direct drive application.
Consult Multiflo engineering to confirm power ratings. Discharge 200mm
Note: NPSHr lines are predicted, use as a guide only. Suction 250mm
Impeller
Vanes 5
Vane ø 460mm
51% 62%
30% Type Closed
68%
120 2000 rpm Part No Material
MF212145 Metal
73%
Frame (Rating - KW)
1900 rpm
MF-6AS 350
74.3%
Seal
1800 rpm
Gland Sealed Pump
70%
90
1700 rpm
Y
NC

Liner (Norm Max r/min)

Head, H (m)

IC IE

64% Unlined 2000

1600 rpm
EFF

Min Passage Size

1500 rpm 33mm

Curve
NPSHr
60 1400 rpm Revision 1
Revision Notes
1300 rpm NPSHr data increas ed to full speed.
Supers edes curve 100 TMA0313-06.
Issued Oct 19
1200 rpm
7m
6m

1100 rpm

1000 rpm
30
5m

900 rpm
4m
3m

© 10/2019 Weir Minerals Multiflo

All Rights Reserved
50 100 150 200 250 300 350 TYPICAL PUMP PERFORMANCE CURVE

Flow Rate, Q (L/s) TMA-100MV/1