Version 1.

0
Published March 2019
Copyright©2019 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage caused by our
goods. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure. If
you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard
International call charges apply)

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents

Chapter 1 Introduction 1
1.1 Package Contents 1

1.2 Specifications 2

1.3 Motherboard Layout 7

1.4 I/O Panel 9

Chapter 2 Installation 11
2.1 Installing the CPU 12

2.2 Installing the CPU Fan and Heatsink 15

2.3 Installing Memory Modules (DIMM) 16

2.4 Expansion Slots (PCI Express Slots) 18

2.5 Jumpers Setup 19

2.6 Onboard Headers and Connectors 20

2.7 Post Status Checker 26

2.8 CrossFireX TM and Quad CrossFireX TM Operation Guide 27

2.8.1 Installing Two CrossFireX TM-Ready Graphics Cards 27

2.8.2 Driver Installation and Setup 29

2.9 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)

Installation Guide 30

2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1) 32

2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2) 36

Chapter 3 Software and Utilities Operation 40

3.1 Installing Drivers 40
3.2 A-Tuning 41

3.3 ASRock Live Update & APP Shop 44

3.3.1 UI Overview 44

3.3.2 Apps 45

3.3.3 BIOS & Drivers 48

3.3.4 Setting 49

3.4 ASRock Polychrome RGB 50

Chapter 4 UEFI SETUP UTILITY 51

4.1 Introduction 53

4.2 EZ Mode 54

4.3 Advanced Mode 55

4.3.1 UEFI Menu Bar 55

4.3.2 Navigation Keys 56

4.4 Main Screen 57

4.5 OC Tweaker Screen 58

4.6 Advanced Screen 70

4.6.1 CPU Configuration 71

4.6.2 Chipset Configuration 73

4.6.3 Storage Configuration 76

4.6.4 Intel® Thunderbolt 77

4.6.5 Super IO Configuration 79

4.6.6 ACPI Configuration 80

4.6.7 USB Configuration 82

4.6.8 Trusted Computing 83

 4.7 Tools 84

4.8 Hardware Health Event Monitoring Screen 87

4.9 Security Screen 90

4.10 Boot Screen 91

4.11 Exit Screen 94

English

6
 Z390 Steel Legend

Chapter 1 Introduction
Thank you for purchasing ASRock Z390 Steel Legend motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the software and utilities. Chapter 4 contains the configuration guide of
the BIOS setup.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any
modifications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specific information about the model
you are using. You may find the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.

1.1 Package Contents

• ASRock Z390 Steel Legend Motherboard (ATX Form Factor)
• ASRock Z390 Steel Legend Quick Installation Guide
• ASRock Z390 Steel Legend Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 3 x Screws for M.2 Sockets (Optional)
• 2 x Standoffs for M.2 Sockets (Optional)
• 1 x I/O Panel Shield
English

1
 1.2 Specifications

Platform • ATX Form Factor

CPU • Supports 9th and 8th Gen Intel® CoreTM Processors (Socket
1151)
• Digi Power design
• 8 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology
• Supports Intel® K-Series unlocked CPUs
• Supports ASRock BCLK Full-range Overclocking

Chipset • Intel® Z390

Memory • Dual Channel DDR4 Memory Technology

• 4 x DDR4 DIMM Slots
• Supports DDR4 4266+(OC)*/4133(OC)/4000(OC)/3866
(OC)/3800(OC)/3733(OC)/3600(OC)/3200(OC)/2933
(OC)/2800 (OC)/2666/2400/2133 non-ECC, un-buffered
memory
* Please refer to Memory Support List on ASRock's website for
more information. (http://www.asrock.com/)
• Supports ECC UDIMM memory modules (operate in non-
ECC mode)
• Max. capacity of system memory: 128GB
• Supports Intel® Extreme Memory Profile (XMP) 2.0
• 15μ Gold Contact in DIMM Slots

Expansion • 2 x PCI Express 3.0 x16 Slots (PCIE1/PCIE4: single at x16

Slot (PCIE1); dual at x16 (PCIE1) / x4 (PCIE4))
* Supports NVMe SSD as boot disks
• 3 x PCI Express 3.0 x1 Slots (Flexible PCIe)
• Supports AMD Quad CrossFireXTM and CrossFireXTM
• 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module
and Intel® CNVi (Integrated WiFi/BT)
English

2
 Z390 Steel Legend

Graphics * Intel® UHD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.
• Supports Intel® UHD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW
Encode1,
• Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel®
InsiderTM, Intel® UHD Graphics
• DirectX 12
• HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit,
HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode
only), MPEG2, MJPEG, VC-1 (Decode only)
• Dual graphics output: Support HDMI and DisplayPort 1.2
ports by independent display controllers
• Supports HDMI 1.4 with max. resolution up to 4K x 2K
(4096x2160) @ 30Hz
• Supports DisplayPort 1.2 with max. resolution up to 4K x 2K
(4096x2304) @ 60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI 1.4 Port (Compliant
HDMI monitor is required)
• Supports HDCP 2.2 with HDMI 1.4 and DisplayPort 1.2
Ports
• Supports 4K Ultra HD (UHD) playback with HDMI 1.4 and
DisplayPort 1.2 Ports

Audio • 7.1 CH HD Audio with Content Protection (Realtek

ALC1200 Audio Codec)
• Premium Blu-ray Audio support
• Supports Surge Protection
• Nichicon Fine Gold Series Audio Caps
• 110dB SNR DAC with Differential Amplifier
• PCB Isolate Shielding
• Individual PCB Layers for R/L Audio Channel
• Gold Audio Jacks
English

3
 LAN • Gigabit LAN 10/100/1000 Mb/s
• Giga PHY Intel® I219V
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection
• Supports Energy Efficient Ethernet 802.3az
• Supports PXE

Rear Panel • 1 x Antenna Bracket

I/O • 1 x PS/2 Mouse/Keyboard Port
• 1 x HDMI Port
• 1 x DisplayPort 1.2
• 1 x Optical SPDIF Out Port
• 2 x USB 2.0 Ports (Supports ESD Protection)
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) (ReDriver) (Supports
ESD Protection)
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) (ReDriver) (Supports
ESD Protection)
• 2 x USB 3.2 Gen1 Ports (Intel® Z390) (Supports ESD
Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Rear Speaker / Central / Bass / Line in /
Front Speaker / Microphone (Gold Audio Jacks)

Storage • 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
16), NCQ, AHCI and Hot Plug*
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_1 will
be disabled.
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_5 will
be disabled.
* If M2_1 is occupied by a PCIE-type M.2 device, SATA3_0 will
be disabled.
• 1 x Ultra M.2 Socket (M2_1), supports M Key type
2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)**
English

• 1 x Ultra M.2 Socket (M2_2), supports M Key type

2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2
PCI Express module up to Gen3 x4 (32 Gb/s)**
** Supports Intel® OptaneTM Technology
** Supports NVMe SSD as boot disks
4 ** Supports ASRock U.2 Kit
 Z390 Steel Legend

Connector • 1 x COM Port Header

• 1 x SPI TPM Header
• 1 x Power LED and Speaker Header
• 2 x RGB LED Headers
* Support in total up to 12V/3A, 36W LED Strip
• 1 x Addressable LED Header
* Supports in total up to 5V/3A, 15W LED Strip
• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* The CPU/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
• 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan
Speed Control)
* The Chassis/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
* CPU_FAN2/WP, CHA_FAN1/WP, CHA_FAN2/WP and
CHA_FAN3/WP can auto detect if 3-pin or 4-pin fan is in use.
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 1 x Thunderbolt AIC Connector (5-pin)
• 2 x USB 2.0 Headers (Support 3 USB 2.0 ports) (Supports
ESD Protection)
• 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports)
(Supports ESD Protection)

BIOS • AMI UEFI Legal BIOS with multilingual GUI support

Feature • ACPI 6.0 Compliant wake up events
• SMBIOS 2.7 Support
• DRAM, PCH 1.0V, VCCIO, VCCST, VCCSA, VPPM Voltage
Multi-adjustment
English

5
 Hardware • Temperature Sensing: CPU, CPU/Water Pump, Chassis/Wa-
Monitor ter Pump Fans
• Fan Tachometer: CPU, CPU/Water Pump, Chassis/Water
Pump Fans
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera-
ture): CPU, CPU/Water Pump, Chassis/Water Pump Fans
• Fan Multi-Speed Control: CPU, CPU/Water Pump, Chassis/
Water Pump Fans
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,
VPPM, PCH 1.0V, VCCSA, VCCST

OS • Microsoft® Windows® 10 64-bit

Certifica- • FCC, CE
tions • ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
English

6
 Z390 Steel Legend

1.3 Motherboard Layout

1 2 3 4 5

1
RGB_LED2
ANT1
CPU_FAN1

ATX12V1
Keyboard
B: USB3_2
T: USB3_1
USB 3.2 Gen1

/Mouse

PS2
DP1
HDMI1

DDR4_A1 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)

DDR4_B2 (64 bit, 288-pin module)

DDR4_A2 (64 bit, 288-pin module)
Z390 STEEL LEGEND

ATXPWR1
USB 3.2 Gen2
T: USB31_TA_1
B: USB31_TC_1
6

USB 2.0 Top:

T: USB_1 LAN1
B: USB_2

29
Central/Bass
Top:
REAR SPK
Center:
SPDIF
Optical
Bottom:

CHA_FAN2/WP
CPU_FAN2/WP
MIC IN
Bottom:

LINE IN
Top:
FRONT
Center:

USB3_3_4
7
28
M2_1

8
SATA3_2

SATA3_3

PCIE1 9
SATA3_0

SATA3_1

CMOS
M2_3

10
PCIE2 Battery Intel
11
Z390
PCIE3

PCIE4
TB1
1
27
M2_2

Ultra M.2
PCIe Gen3 x4
RoHS
PCIE5 USB5
CLRMOS1

1
SPK_PLED1

1
SPI_TPM_J1

COM1 1 1
USB3_5_6 CHA_FAN1/WP CHA_FAN3/WP
HD_AUDIO1 USB_3_4 PLED PWRBTN

ADDR_LED1 RGB_LED1
1 1
1 1 1 1 1
HDLED RESET
PANEL1 SATA3_5 SATA3_4

26 25 24 23 22 21 20 19 18 17 16 15 14 13 12
English

7
 No. Description
1 ATX 12V Power Connector (ATX12V1)
2 CPU Fan Connector (CPU_FAN1)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
5 RGB LED Header (RGB_LED2)
6 ATX Power Connector (ATXPWR1)
7 USB 3.2 Gen1 Header (USB3_3_4)
8 SATA3 Connector (SATA3_2)
9 SATA3 Connector (SATA3_3)
10 SATA3 Connector (SATA3_1)
11 SATA3 Connector (SATA3_0)
12 SPI TPM Header (SPI_TPM_J1)
13 SATA3 Connector (SATA3_4)
14 SATA3 Connector (SATA3_5)
15 System Panel Header (PANEL1)
16 Power LED and Speaker Header (SPK_PLED1)
17 Chassis Fan / Waterpump Fan Connector (CHA_FAN3/WP)
18 Chassis Fan / Waterpump Fan Connector (CHA_FAN1/WP)
19 Clear CMOS Jumper (CLRMOS1)
20 USB 3.2 Gen1 Header (USB3_5_6)
21 USB 2.0 Header (USB5)
22 USB 2.0 Header (USB_3_4)
23 RGB LED Header (RGB_LED1)
24 Addressable LED Header (ADDR_LED1)
25 COM Port Header (COM1)
26 Front Panel Audio Header (HD_AUDIO1)
27 Thunderbolt AIC Header (TB1)
28 CPU Fan / Waterpump Fan Connector (CPU_FAN2/WP)
29 Chassis Fan / Waterpump Fan Connector (CHA_FAN2/WP)
English

8
 Z390 Steel Legend

1.4 I/O Panel

4 6
1 2 3 5 7

15 14 13 12 11 10 9 8

No. Description No. Description

1 PS/2 Mouse/Keyboard Port 9 Optical SPDIF Out Port
2 USB 3.2 Gen2 Type-A Port (USB31_TA_1) 10 USB 2.0 Ports (USB_1_2)
3 LAN RJ-45 Port* 11 USB 3.2 Gen2 Type-C Port (USB31_TC_1)
4 Central / Bass (Orange) 12 HDMI Port
5 Rear Speaker (Black) 13 DisplayPort 1.2
6 Line In (Light Blue) 14 USB 3.2 Gen1 Ports (USB3_1_2)
7 Front Speaker (Lime)** 15 Antenna Bracket
8 Microphone (Pink)

English

9
 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Port

Activity / Link LED Speed LED

Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below
for connection details in accordance with the type of speaker you use.

Audio Output Front Speaker Rear Speaker Central / Bass Line In

Channels (No. 7) (No. 5) (No. 4) (No. 6)
2 V -- -- --
4 V V -- --
6 V V V --
8 V V V V
English

10
 Z390 Steel Legend

Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

English

11
 2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any bent pins in the
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

2
English

12
 Z390 Steel Legend

3 4

English

13
 Please save and replace the cover if the processor is removed. The cover must be
placed if you wish to return the motherboard for after service.
English

14
 Z390 Steel Legend

2.2 Installing the CPU Fan and Heatsink

1 2

N
FA
U_
CP

English

15
 2.3 Installing Memory Modules (DIMM)

This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.

Dual Channel Memory Configuration

Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated
2 Populated Populated Populated Populated

The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English

16
 Z390 Steel Legend

3
English

17
 2.4 Expansion Slots (PCI Express Slots)
There are 5 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.
PCIE5 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIe Slot Configurations

PCIE1 PCIE4

Single Graphics Card x16 N/A

Two Graphics Cards in

x16 x4
CrossFireXTM Mode

For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1/WP, CHA_FAN2/WP or CHA_FAN3/WP) when
using multiple graphics cards.
English

18
 Z390 Steel Legend

2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.

Clear CMOS Jumper Short: Clear CMOS

(CLRMOS1) Open: Default
(see p.7, No. 19) 2-pin Jumper

CLRMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please turn
off the computer and unplug the power cord, then use a jumper cap to short the
pins on CLRMOS1 for 3 seconds. Please remember to remove the jumper cap after
clearing the CMOS. If you need to clear the CMOS when you just finish updating
the BIOS, you must boot up the system first, and then shut it down before you do
the clear-CMOS action.

English

19
 2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.

System Panel Header PLED+ Connect the power

PLED-
(9-pin PANEL1) PWRBTN#
GND
button, reset button and
(see p.7, No. 15) system status indicator on
1
GND
the chassis to this header
RESET#
GND according to the pin
HDLED-
HDLED+ assignments below. Note
the positive and negative
pins before connecting
the cables.

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way
to turn off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to
restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when
the system is operating. The LED keeps blinking when the system is in S1/S3 sleep
state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on
when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists
of power button, reset button, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
English

20
 Z390 Steel Legend

Power LED and Speaker SPEAKER Please connect the

DUMMY
Header DUMMY
chassis power LED and
(7-pin SPK_PLED1) +5V the chassis speaker to this
(see p.7, No. 16) header.
1

PLED+
PLED+
PLED-

Serial ATA3 Connectors SATA3_0 SATA3_2 These six SATA3

SATA3_1 SATA3_3
(SATA3_0: connectors support SATA
see p.7, No. 11) data cables for internal
(SATA3_1: storage devices with up to
see p.7, No. 10) 6.0 Gb/s data transfer rate.
(SATA3_2: * If M2_1 is occupied by
see p.7, No. 8) a SATA-type M.2 device,
(SATA3_3: SATA31 will be disabled.
see p.7, No. 9) SATA3_5 SATA3_4 * If M2_2 is occupied by
(SATA3_4: a SATA-type M.2 device,
see p.7, No. 13) SATA3_5 will be disabled.
(SATA3_5: * If M2_1 is occupied by
see p.7, No. 14) a PCIE-type M.2 device,
SATA3_0 will be disabled.

USB_PWR
USB 2.0 Headers P-
P+ There are two USB
GND
(9-pin USB_3_4) DUMMY 2.0 headers on this
(see p.7, No. 22) motherboard.
1
GND
P+
P-
USB_PWR

(4-pin USB5)
(see p.7, No. 21)
English

21
 USB 3.2 Gen1 Headers Vbus There are two headers on
Vbus IntA_PB_SSRX-

(19-pin USB3_3_4) IntA_PA_SSRX- IntA_PB_SSRX+ this motherboard. Each

IntA_PA_SSRX+ GND

(see p.7, No. 7) GND IntA_PB_SSTX- USB 3.2 Gen1 header can
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+ GND support two ports.
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1

(19-pin USB3_5_6) IntA_P_D+

IntA_P_D-
GND

(see p.7, No. 20) IntA_P_SSTX+

IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus

1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID

Front Panel Audio Header GND This header is for

PRESENCE#
(9-pin HD_AUDIO1) MIC_RET
OUT_RET
connecting audio devices
(see p.7, No. 26) to the front audio panel.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
English

22
 Z390 Steel Legend

Chassis/Water Pump Fan 4 3 2 1 This motherboard

Connectors provides three 4-Pin water
(4-pin CHA_FAN1/WP) cooling chassis fan
FAN_SPEED_CONTROL
(see p.7, No. 18) CHA_FAN_SPEED connectors. If you plan to
(4-pin CHA_FAN2/WP) FAN_VOLTAGE
connect a 3-Pin chassis
GND
(see p.7, No. 29) water cooler fan, please
(4-pin CHA_FAN3/WP) connect it to Pin 1-3.
(see p.7, No. 17)

CPU Fan Connector +12V This motherboard pro-

CPU_FAN_SPEED
(4-pin CPU_FAN1) GND FAN_SPEED_CONTROL vides a 4-Pin CPU fan
(see p.7, No. 2) (Quiet Fan) connector.
1 2 3 4
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.

CPU/Water Pump Fan 4 3 2 1 This motherboard

Connector provides a 4-Pin water
(4-pin CPU_FAN2/WP) GND
cooling CPU fan
FAN_VOLTAGE
(see p.7, No. 28) CPU_FAN_SPEED connector. If you plan
FAN_SPEED_CONTROL
to connect a 3-Pin CPU
water cooler fan, please
connect it to Pin 1-3.

ATX Power Connector 12 24 This motherboard

(24-pin ATXPWR1) provides a 24-pin ATX
(see p.7, No. 6) power connector. To use a
20-pin ATX power supply,
please plug it along Pin 1
1 13 and Pin 13.

ATX 12V Power 8 5 This motherboard

Connector provides an 8-pin ATX
(8-pin ATX12V1) 12V power connector. To
4 1
English

(see p.7, No. 1) use a 4-pin ATX power

supply, please plug it along
Pin 1 and Pin 5.

23
 SPI TPM Header SPI_DQ3 This connector supports
+3.3V
(13-pin SPI_TPM_J1) Dummy
CLK
SPI Trusted Platform
SPI_MOSI
(see p.7, No. 12) RST# Module (TPM) system,
TPM_PIRQ
which can securely store
1 keys, digital certificates,
GND
SPI_TPM_CS#
passwords, and data. A
RSMRST#
SPI_MISO TPM system also helps
SPI_CS0
SPI_DQ2 enhance network security,
protects digital identities,
and ensures platform
integrity.

Thunderbolt AIC Please connect a Thunderbolt™

Connector add-in card (AIC) to the
(5-pin TB1) Thunderbolt AIC connector via
(see p.7, No. 27) the GPIO cable.
* Please install the Thunderbolt™
AIC card to PCIE4 (default
slot).

RGB LED Headers RGB header is used to connect

1
(4-pin RGB_LED1) 12V G R B
RGB LED extension cable which
(see p.7, No. 23) allows users to choose from vari-
(4-pin RGB_LED2) ous LED lighting effects.
(see p.7, No. 5) Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
* Please refer to page 50 for
further instructions on this
header.
English

24
 Z390 Steel Legend

Addressable LED Header 1

This header is used to connect
(3-pin ADDR_LED1) GND
Addressable LED extension cable
(see p.7, No. 24) DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
* Please refer to page 51 for
further instructions on this
header.

Serial Port Header RRXD1 This COM1 header

DDTR#1
(9-pin COM1) DDSR#1
CCTS#1
supports a serial port
(see p.7, No. 25) module.
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1

English

25
 2.7 Post Status Checker
Post Status Checker (PSC) diagnoses the computer when users power on the
machine. It emits a red light to indicate whether the CPU, memory, VGA or storage
is dysfunctional. The lights go off if the four mentioned above are functioning
normally.
English

26
 Z390 Steel Legend

2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide

This motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you
to install up to three identical PCI Express x16 graphics cards.

1. You should only use identical CrossFireXTM-ready graphics cards that are AMD
certified.
2. Make sure that your graphics card driver supports AMD CrossFireXTM technology.
Download the drivers from the AMD’s website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD’s website for details.
4. If you pair a 12-pipe CrossFireXTM Edition card with a 16-pipe card, both cards will
operate as 12-pipe cards while in CrossFireXTM mode.
5. Different CrossFireXTM cards may require different methods to enable CrossFi-
reXTM. Please refer to AMD graphics card manuals for detailed installation guide.

2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards

Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.

Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
CrossFire Bridge Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
English

27
 Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE1 slot.
English

28
 Z390 Steel Legend

2.8.2 Driver Installation and Setup

Step 1
Power on your computer and boot into OS.

Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.

The Catalyst Uninstaller is an optional download. We recommend using this utility

to uninstall any previously installed Catalyst drivers prior to installation. Please
check AMD’s website for AMD driver updates.

Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.

Step 4
Double-click the AMD Catalyst Control
AMD Catalyst Control Center Center icon in the Windows® system tray.

Step 5
In the left pane, click Performance and
then AMD CrossFireXTM . Then select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click Apply. English

29
 2.9 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)
Installation Guide
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key
E) supports type 2230 WiFi/BT module and Intel® CNVi (Integrated WiFi/BT).
* The M.2 socket does not support SATA M.2 SSDs.

Before you install Intel® Integrated Connectivity (CNVi) module, be sure to turn off
the AC power.

Installing the WiFi/BT module or Intel® CNVi (Integrated WiFi/BT)

Step 1

Prepare a type 2230 WiFi/BT module

or Intel® CNVi (Integrated WiFi/BT)
and the screw.

Step 2

Find the nut location to be used.

PCB Length: 3cm

Module Type: Type2230

A
English

30
 Z390 Steel Legend

Step 3

Gently insert the WiFi/BT module

or Intel® CNVi (Integrated WiFi/
BT) into the M.2 slot. Please be aware
that the module only fits in one
orientation.
A

A 20o

Step 4

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
A

English

31
 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1) supports M Key type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s
module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_1 will be disabled.
* If M2_1 is occupied by a PCIE-type M.2 device, SATA3_0 will be disabled.

Installing the M.2_SSD (NGFF) Module

Step 1

Prepare a M.2_SSD (NGFF) module

and the screw.

5 Step 2
4
3 Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
2
1

E D C B A

No. 1 2 3 4 5
Nut Location A B C D E
PCB Length 3cm 4.2cm 6cm 8cm 11cm
Module Type Type2230 Type 2242 Type2260 Type 2280 Type 22110
English

32
 Z390 Steel Legend

Step 3

Before installing a M.2 (NGFF) SSD

module, please loosen the screws to
remove the M.2 heatsink.

Step 4

Prepare the M.2 standoff that comes

with the package. Then hand tighten
the standoff into the desired nut
E D C B A location on the motherboard. Align
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.

E D C B A 20o

Step 5

Tighten the screw with a screwdriver

to secure the module into place.
Please do not overtighten the screw as
E D NUT2 NUT1

this might damage the module.

English

33
 M.2_SSD (NGFF) Module Support List

Vendor Interface P/N

ADATA SATA3 AXNS330E-32GM-B
ADATA SATA3 AXNS381E-128GM-B
ADATA SATA3 AXNS381E-256GM-B
ADATA SATA3 ASU800NS38-256GT-C
ADATA SATA3 ASU800NS38-512GT-C
ADATA PCIe3 x4 ASX7000NP-128GT-C
ADATA PCIe3 x4 ASX8000NP-256GM-C
ADATA PCIe3 x4 ASX7000NP-256GT-C
ADATA PCIe3 x4 ASX8000NP-512GM-C
ADATA PCIe3 x4 ASX7000NP-512GT-C
Apacer PCIe3 x4 AP240GZ280
Corsair PCIe3 x4 CSSD-F240GBMP500
Crucial SATA3 CT120M500SSD4
Crucial SATA3 CT240M500SSD4
Intel SATA3 Intel SSDSCKGW080A401/80G
Intel PCIe3 x4 SSDPEKKF256G7
Intel PCIe3 x4 SSDPEKKF512G7
Kingston SATA3 SM2280S3
Kingston PCIe3 x4 SKC1000/480G
Kingston PCIe2 x4 SH2280S3/480G
OCZ PCIe3 x4 RVD400 -M2280-512G (NVME)
PATRIOT PCIe3 x4 PH240GPM280SSDR NVME
Plextor PCIe3 x4 PX-128M8PeG
Plextor PCIe3 x4 PX-1TM8PeG
Plextor PCIe3 x4 PX-256M8PeG
Plextor PCIe3 x4 PX-512M8PeG
Plextor PCIe PX-G256M6e
Plextor PCIe PX-G512M6e
Samsung PCIe3 x4 SM961 MZVPW128HEGM (NVM)
Samsung PCIe3 x4 PM961 MZVLW128HEGR (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250) (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250BW) (NVME)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe3 x4 SM951 (MZHPV256HDGL)
Samsung PCIe3 x4 SM951 (MZHPV512HDGL)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
SanDisk PCIe SD6PP4M-128G
English

SanDisk PCIe SD6PP4M-256G

Team SATA3 TM4PS4128GMC105
Team SATA3 TM4PS4256GMC105
Team SATA3 TM8PS4128GMC105
Team SATA3 TM8PS4256GMC105

34
 Z390 Steel Legend

TEAM PCIe3 x4 TM8FP2240G0C101

TEAM PCIe3 x4 TM8FP2480GC110
Transcend SATA3 TS256GMTS400
Transcend SATA3 TS512GMTS600
Transcend SATA3 TS512GMTS800
V-Color SATA3 VLM100-120G-2280B-RD
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
V-Color SATA3 VLM100-240G-2280B-RD
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
WD PCIe3 x4 WDS256G1X0C-00ENX0 (NVME)
WD PCIe3 x4 WDS512G1X0C-00ENX0 (NVME)

For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com

English

35
 2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_2) supports M Key type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_5 will be disabled.

Installing the M.2_SSD (NGFF) Module

Step 1

Prepare a M.2_SSD (NGFF) module

and the screw.

4 Step 2
3
2 Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
1

D C B A

No. 1 2 3 4
Nut Location A B C D
PCB Length 3cm 4.2cm 6cm 8cm
Module Type Type2230 Type 2242 Type2260 Type 2280
English

36
 Z390 Steel Legend

1
Step 3

Before installing a M.2 (NGFF) SSD

2 module, please loosen the screws to
1 remove the M.2 heatsink.
1

Step 4

Prepare the M.2 standoff that comes

with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
English

Step 5

Tighten the screw with a screwdriver

E D NUT2 NUT1
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
37
 M.2_SSD (NGFF) Module Support List

Vendor Interface P/N

ADATA SATA3 AXNS330E-32GM-B
ADATA SATA3 AXNS381E-128GM-B
ADATA SATA3 AXNS381E-256GM-B
ADATA SATA3 ASU800NS38-256GT-C
ADATA SATA3 ASU800NS38-512GT-C
ADATA PCIe3 x4 ASX7000NP-128GT-C
ADATA PCIe3 x4 ASX8000NP-256GM-C
ADATA PCIe3 x4 ASX7000NP-256GT-C
ADATA PCIe3 x4 ASX8000NP-512GM-C
ADATA PCIe3 x4 ASX7000NP-512GT-C
Apacer PCIe3 x4 AP240GZ280
Corsair PCIe3 x4 CSSD-F240GBMP500
Crucial SATA3 CT120M500SSD4
Crucial SATA3 CT240M500SSD4
Intel SATA3 Intel SSDSCKGW080A401/80G
Intel PCIe3 x4 SSDPEKKF256G7
Intel PCIe3 x4 SSDPEKKF512G7
Kingston SATA3 SM2280S3
Kingston PCIe3 x4 SKC1000/480G
Kingston PCIe2 x4 SH2280S3/480G
OCZ PCIe3 x4 RVD400 -M2280-512G (NVME)
PATRIOT PCIe3 x4 PH240GPM280SSDR NVME
Plextor PCIe3 x4 PX-128M8PeG
Plextor PCIe3 x4 PX-1TM8PeG
Plextor PCIe3 x4 PX-256M8PeG
Plextor PCIe3 x4 PX-512M8PeG
Plextor PCIe PX-G256M6e
Plextor PCIe PX-G512M6e
Samsung PCIe3 x4 SM961 MZVPW128HEGM (NVM)
Samsung PCIe3 x4 PM961 MZVLW128HEGR (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250) (NVME)
Samsung PCIe3 x4 960 EVO (MZ-V6E250BW) (NVME)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe3 x4 SM951 (MZHPV256HDGL)
Samsung PCIe3 x4 SM951 (MZHPV512HDGL)
Samsung PCIe3 x4 SM951 (NVME)
Samsung PCIe x4 XP941-512G (MZHPU512HCGL)
SanDisk PCIe SD6PP4M-128G
English

SanDisk PCIe SD6PP4M-256G

Team SATA3 TM4PS4128GMC105
Team SATA3 TM4PS4256GMC105
Team SATA3 TM8PS4128GMC105
Team SATA3 TM8PS4256GMC105

38
 Z390 Steel Legend

TEAM PCIe3 x4 TM8FP2240G0C101

TEAM PCIe3 x4 TM8FP2480GC110
Transcend SATA3 TS256GMTS400
Transcend SATA3 TS512GMTS600
Transcend SATA3 TS512GMTS800
V-Color SATA3 VLM100-120G-2280B-RD
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
V-Color SATA3 VLM100-240G-2280B-RD
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
WD PCIe3 x4 WDS256G1X0C-00ENX0 (NVME)
WD PCIe3 x4 WDS512G1X0C-00ENX0 (NVME)

For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com

English

39
 Chapter 3 Software and Utilities Operation
3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard’s features.

Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
“ASRSETUP.EXE” in the Support CD to display the menu.

Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.

Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.
English

40
 Z390 Steel Legend

3.2 A-Tuning
A-Tuning is ASRock’s multi purpose software suite with a new interface, more new
features and improved utilities.

3.2.1 Installing A-Tuning

A-Tuning can be downloaded from ASRock Live Update & APP Shop. After the
installation, you will find the icon “A-Tuning“ on your desktop. Double-click the “A-
Tuning“ icon, A-Tuning main menu will pop up.

3.2.2 Using A-Tuning

There are five sections in A-Tuning main menu: Operation Mode, OC Tweaker,
System Info, FAN-Tastic Tuning and Settings.

Operation Mode
Choose an operation mode for your computer.

English

41
 OC Tweaker
Configurations for overclocking the system.

System Info
View information about the system.
*The System Browser tab may not appear for certain models.
English

42
 Z390 Steel Legend

FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically shift
to the next speed level when the assigned temperature is met.

Settings
Configure ASRock A-Tuning. Click to select "Auto run at Windows Startup" if you
want A-Tuning to be launched when you start up the Windows operating system.

English

43
 3.3 ASRock Live Update & APP Shop
The ASRock Live Update & APP Shop is an online store for purchasing and
downloading software applications for your ASRock computer. You can quickly and
easily install various apps and support utilities. With ASRock Live Update & APP
Shop, you can optimize your system and keep your motherboard up to date simply
with a few clicks.

Double-click on your desktop to access ASRock Live Update & APP Shop
utility.

*You need to be connected to the Internet to download apps from the ASRock Live Update & APP Shop.

3.3.1 UI Overview
Category Panel Hot News

Information Panel

Category Panel: The category panel contains several category tabs or buttons that
when selected the information panel below displays the relative information.

Information Panel: The information panel in the center displays data about the
currently selected category and allows users to perform job-related tasks.
English

Hot News: The hot news section displays the various latest news. Click on the image
to visit the website of the selected news and know more.

44
 Z390 Steel Legend

3.3.2 Apps
When the "Apps" tab is selected, you will see all the available apps on screen for you
to download.

Installing an App
Step 1
Find the app you want to install.

The most recommended app appears on the left side of the screen. The other various
apps are shown on the right. Please scroll up and down to see more apps listed.

You can check the price of the app and whether you have already intalled it or not.

- The red icon displays the price or "Free" if the app is free of charge.

- The green "Installed" icon means the app is installed on your computer.

Step 2
Click on the app icon to see more details about the selected app.
English

45
 Step 3

If you want to install the app, click on the red icon to start downloading.

Step 4
When installation completes, you can find the green "Installed" icon appears on the
upper right corner.

To uninstall it, simply click on the trash can icon .

English

*The trash icon may not appear for certain apps.

46
 Z390 Steel Legend

Upgrading an App
You can only upgrade the apps you have already installed. When there is an
available new version for your app, you will find the mark of "New Version"
appears below the installed app icon.

Step 1
Click on the app icon to see more details.

Step 2

Click on the yellow icon to start upgrading.

English

47
 3.3.3 BIOS & Drivers

Installing BIOS or Drivers

When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.

Step 1

Please check the item information before update. Click on to see more details.
Step 2

Click to select one or more items you want to update.

Step 3

Click Update to start the update process.

English

48
 Z390 Steel Legend

3.3.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock Live Update & APP Shop
on Windows startup.

English

49
 3.4 ASRock Polychrome RGB
ASRock Polychrome RGB is a lighting control utility specifically designed for unique individuals
with sophisticated tastes to build their own stylish colorful lighting system. Simply by connect-
ing the LED strip, you can customize various lighting schemes and patterns, including Static,
Breathing, Strobe, Cycling, Music, Wave and more.

Connecting the LED Strip

Connect your RGB LED strips to the RGB LED Headers (RGB_LED1, RGB_LED2) on the
motherboard.

RGB_LED2
1
12V G R B
Z390 STEEL LEGEND

1 B
R
G
12V

RGB_LED1
1
12V G R B

1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.

1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.
English

50
 Z390 Steel Legend

Connecting the Addressable RGB LED Strip

Connect your Addressable RGB LED strip to the Addressable LED Header (ADDR_LED1) on
the motherboard.

Z390 STEEL LEGEND

ADDR_LED1

GND
DO_ADDR
VOUT

1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.

1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.
English

51
 ASRock Polychrome RGB Utility

Now you can adjust the RGB LED color through the ASRock Polychrome RGB utility.
Download this utility from the ASRock Live Update & APP Shop and start coloring your
PC style your way!

Drag the tab to customize your

preference.

Toggle on/off the

RGB LED switch
Select a RGB LED light effect
from the drop-down menu.

Sync RGB LED effects

for all LED regions of
the motherboard
English

52
 Z390 Steel Legend

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
after you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system off
and then back on.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

English

53
 4.2 EZ Mode
The EZ Mode screen appears when you enter the BIOS setup program by default. EZ
mode is a dashboard which contains multiple readings of the system’s current status.
You can check the most crucial information of your system, such as CPU speed,
DRAM frequency, SATA information, fan speed, etc.

Press <F6> or click the "Advanced Mode" button at the upper right corner of the
screen to switch to "Advanced Mode" for more options.

1 2 3 4 5 6

No. Function
1 Help
2 Load UEFI Defaults
3 Save Changes and Exit
4 Discard Changes
5 Change Language
6 Switch to Advanced Mode
English

54
 Z390 Steel Legend

4.3 Advanced Mode

The Advanced Mode provides more options to configure the BIOS settings. Refer to
the following sections for the detailed configurations.

To access the EZ Mode, press <F6> or click the "EZ Mode" button at the upper right
corner of the screen.

4.3.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:

Main For setting system time/date information

OC Tweaker For overclocking configurations

Advanced For advanced system configurations

Tool Useful tools

H/W Monitor Displays current hardware status

Security For security settings

Boot For configuring boot settings and boot priority

Exit Exit the current screen or the UEFI Setup Utility

English

55
 4.3.2 Navigation Keys
Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.

Please check the following table for the descriptions of each navigation key.

Navigation Key(s) Description

+ / - To change option for the selected items

<Tab> Switch to next function

<PGUP> Go to the previous page

<PGDN> Go to the next page

<HOME> Go to the top of the screen

<END> Go to the bottom of the screen

<F1> To display the General Help Screen

<F5> Add / Remove Favorite

<F7> Discard changes and exit the SETUP UTILITY

<F9> Load optimal default values for all the settings

<F10> Save changes and exit the SETUP UTILITY

<F12> Print screen

<ESC> Jump to the Exit Screen or exit the current screen

English

56
 Z390 Steel Legend

4.4 Main Screen

When you enter the UEFI SETUP UTILITY, the Main screen will appear and
display the system overview.

My Favorite
Display your collection of BIOS items. Press F5 to add/remove your favorite items.

English

57
 4.5 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.

Because the UEFI software is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.

Advanced Turbo
You can use this option to increase your system performance. This option appears only
when your CPU supports this function. This option appears only when you adopt K-Series
CPU.

Load Optimized CPU OC Setting

You can use this option to load optimized CPU overclocking setting. Please note that
overclocking may cause damage to your CPU and motherboard. It should be done at your
own risk and expense.

Load Optimized GPU OC Setting

English

You can use this option to load optimized GPU overclocking setting. Please note that
overclocking may cause damage to your GPU and motherboard. It should be done at your
own risk and expense. This option appears only when you adopt K-Series CPU.

58
 Z390 Steel Legend

CPU Configuration
Multi Core Enhancement
Improve the system's performance by forcing the CPU to perform the highest
frequency on all CPU cores simultaneously. Disable to reduce power consumption .

CPU Ratio
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
affecting the clock speed of other components.

CPU Cache Ratio

The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.

Minimum CPU Cache Ratio

Set the minimum CPU Internal Bus Speed Ratio.

BCLK Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the BCLK will increase the internal CPU clock speed but also affect the
clock speed of other components.

BCLK Spread Spectrum

Enable BCLK Spread Spectrum to reduce electromagnetic interference for passing
EMI tests. Disable to achieve higher clock speeds when overclocking.

Boot Performance Mode

Select the performance state that the BIOS will set before OS handoff.

FCLK Frequency
Configure the FCLK Frequency.

AVX Ratio Offset

AVX Ratio Offset specifies a negative offset from the CPU Ratio for AVX workloads.
AVX is a more stressful workload that lower the AVX ratio to ensure maximum
possible ratio for SSE workloads.
English

BCLK Aware Adaptive Voltage

BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for

59
 BCLK OC to avoid high voltage overrides.

Ring to Core Ratio Offset

Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.

Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.

Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.

Intel Speed Shift Technology

Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-states.

Long Duration Power Limit

Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered after a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

Long Duration Maintained

Configure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.

Short Duration Power Limit

Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.

CPU Core Current Limit

Configure the current limit of the CPU core. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

GT Current Limit
English

Configure the current limit of the GT slice. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

GT Frequency

60
 Z390 Steel Legend

Configure the frequency of the integrated GPU.

DRAM Configuration
DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to confirm and
apply your new settings.

DRAM Timing Configuration

Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard specifications.

BCLK Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK. Increasing the
BCLK will increase the internal CPU clock speed but also affect the clock speed of other
components.

DRAM Reference Clock

Select Auto for optimized settings.

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.

DRAM Clock
Choose a frequency to override to clock delay for memory training. DRAM Clock
controls memory training only if ASRock Timing Optimization is disabled.

Primary Timing
CAS# Latency (tCL)
The time between sending a column address to the memory and the beginning of the data
in response.

RAS# to CAS# Delay and Row Precharge (tRCDtRP)

RAS# to CAS# Delay : The number of clock cycles required between the opening of a row
English

of memory and accessing columns within it.

Row Precharge: The number of clock cycles required between the issuing of the precharge
command and opening the next row.

61
 RAS# Active Time (tRAS)
The number of clock cycles required between a bank active command and issuing the
precharge command.

Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.

Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.

Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.

RAS to RAS Delay (tRRD_L)

The number of clocks between two rows activated in different banks of the same
rank.

RAS to RAS Delay (tRRD_S)

The number of clocks between two rows activated in different banks of the same
rank.

Write to Read Delay (tWTR_L)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.

Write to Read Delay (tWTR_S)

The number of clocks between the last valid write operation and the next read command to
the same internal bank.

Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row pre-
charge command to the same rank.
English

Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.

62
 Z390 Steel Legend

CAS Write Latency (tCWL)

Configure CAS Write Latency.

Third Timing
tREFI
Configure refresh cycles at an average periodic interval.

tCKE
Configure the period of time the DDR4 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.

Turn Around Timing

tRDRD_sg
Configure between module read to read delay.

tRDRD_dg
Configure between module read to read delay.

tRDRD_dr
Configure between module read to read delay.

tRDRD_dd
Configure between module read to read delay.

tRDWR_sg
Configure between module read to write delay.

tRDWR_dg
Configure between module read to write delay.

tRDWR_dr
Configure between module read to write delay.

tRDWR_dd
Configure between module read to write delay.
English

tWRRD_sg
Configure between module write to read delay.

63
 tWRRD_dg
Configure between module write to read delay.

tWRRD_dr
Configure between module write to read delay.

tWRRD_dd
Configure between module write to read delay.

tWRWR_sg
Configure between module write to write delay.

tWRWR_dg
Configure between module write to write delay.

tWRWR_dr
Configure between module write to write delay.

tWRWR_dd
Configure between module write to write delay.

Round Trip Timing

RTL Init Value
Configure round trip latency init value for round trip latency training.

IO-L Init Value

Configure IO latency init value for IO latency training.

RTL (CH A)
Configure round trip latency for channel A.

RTL (CH B)
Configure round trip latency for channel B.

IO-L (CH A)
Configure IO latency for channel A.
English

IO-L (CH B)
Configure IO latency for channel B.

64
 Z390 Steel Legend

IO-L Offset (CH A)

Configure IO latency offset for channel A.

IO-L Offset (CH B)

Configure IO latency offset for channel B.

RFR Delay (CH A)

Configure RFR Delay for Channel A.

RFR Delay (CH B)

Configure RFR Delay for Channel B.

ODT Setting
ODT WR (A1)
Configure the memory on die termination resistors' WR for channel A1.

ODT WR (A2)
Configure the memory on die termination resistors' WR for channel A2.

ODT WR (B1)
Configure the memory on die termination resistors' WR for channel B1.

ODT WR (B2)
Configure the memory on die termination resistors' WR for channel B2.

ODT NOM (A1)

Use this to change ODT (CH A1) Auto/Manual settings. The default is [Auto].

ODT NOM (A2)

Use this to change ODT (CH A2) Auto/Manual settings. The default is [Auto].

ODT NOM (B1)

Use this to change ODT (CH B1) Auto/Manual settings. The default is [Auto].

ODT NOM (B2)

Use this to change ODT (CH B2) Auto/Manual settings. The default is [Auto].
English

ODT PARK (A1)

Configure the memory on die termination resistors' PARK for channel A1.

65
 ODT PARK (A2)
Configure the memory on die termination resistors' PARK for channel A2.

ODT PARK (B1)

Configure the memory on die termination resistors' PARK for channel B1.

ODT PARK (B2)

Configure the memory on die termination resistors' PARK for channel B2.

COMP Setting
RCOMP0: DQ ODT (Read)
Default is 121.

RCOMP1: DQ /CLK Ron (Drive Strength)

Default is 75.

RCOMP2: CMD/CTL Ron (Drive Strength)

Default is 100.

DQ ODT Driving
Adjust ODT Driving for better signal. Default is 60.

DQ Driving
Adjust DQ Driving for better signal. Default is 26.

Command Driving
Adjust Command Driving for better signal. Default is 20.

Control Driving
Adjust Control Driving for better signal. Default is 20.

Clock Driving
Adjust Clock Driving for better signal. Default is 26.

DQ Slew Rate
Adjust DQ Slew Rate for better signal. Default is 59.
English

Command Slew Rate

Adjust Command Slew Rate for better signal. Default is 53 for IN, 89 for 2N.

66
 Z390 Steel Legend

Contorl Slew Rate

Adjust Control Slew Rate for better signal. Default is 53.

Clock Slew Rate

Adjust Clock Slew Rate for better signal. Default is 53.

MRS Setting
MRS tCL
Configure the tCL for Memory MRS MR0.

MRS tWRtRTP
Configure the tWRtRTP for Memory MRS MRC.

MRS tCWL
Configure the tCWL for Memory MRS MR2.

MRS tCCD_L
Configure the tCL for Memory MRS MR6.

Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.

Realtime Memory Timing

Configure the realtime memory timings.

[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.

Command Tristate
Configure the Command Tristate Support.

Exit On Failure
Configure the Exit On Failure for MRC training steps.

Reset On Training Fail

English

Reset system if the MRC training fails.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

67
 Voltage Configuration
CPU Core/Cache Voltage
Configure the voltage for the CPU Core/Cache.

CPU Load-Line Calibration

CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy loading.

GT Voltage
Configure the voltage for the integrated GPU.

GT Load-Line Calibration
GT Load-Line Calibration helps prevent integrated GPU voltage droop when the
system is under heavy load.

DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].

DRAM Activating Power Supply

Configure the voltage for the DRAM Activating Power Supply.

PCH +1.05 Voltage

Configure the chipset voltage (1.05V).

VCCIO Voltage
Configure the voltage for the VCCIO.

VCCST Voltage
Configure the voltage for the VCCST.

VCCSA Voltage
Configure the voltage for the VCCSA.

CPU Internal PLL Voltage

Default is 0.900V. Each step is 0.015V. Adding 9- 15 steps will helps CPU PLL to lock
internal clock during High frequency under Ln2 cooling. For example: 1.020V -
English

1.125V will be proper value. But the voltage level will be different on each processor.
User has to find the best value for your own processor. CPU Vcore Voltage must
higher than CPU Internal PLL Voltage, or your processor will hang.

68
 Z390 Steel Legend

GT PLL Voltage
Default is 0.900V. Each step is 0.015V. Adding 9 -15 steps will help CPU PLL to lock
internal clock during High frequency under Ln2 cooling. For example: 1.020V -
1.125V will be proper value. Bu the voltage level will be different on each processor.
User has to find the best value for user’s own processor.

Ring PLL Voltage

Default is 0.900V. Each step is 0.015V. Adding 9 -15 steps will help CPU PLL to lock
internal clock during High frequency under Ln2 cooling. For example: 1.020V -
1.125V will be proper value. Bu the voltage level will be different on each processor.
User has to find the best value for user’s own processor.

System Agent PLL Voltage

Default is 0.900V. Each step is 0.015V. Adding 9 -15 steps will help CPU PLL to lock
internal clock during High frequency under Ln2 cooling. For example: 1.020V -
1.125V will be proper value. Bu the voltage level will be different on each processor.
User has to find the best value for user’s own processor.

Memory Controller PLL Voltage

Default is 0.900V. Each step is 0.015V. Adding 9 -15 steps will help CPU PLL to lock
internal clock during High frequency under Ln2 cooling. For example: 1.020V -
1.125V will be proper value. Bu the voltage level will be different on each processor.
User has to find the best value for user’s own processor.

Save User Default

Type a profile name and press enter to save your settings as user default.

Load User Default

Load previously saved user defaults.

Save User UEFI Setup Profile to Disk

It helps you to save current UEFI settings as an user profile to disk.

Load User UEFI Setup Profile from Disk

You can load previous saved profile from the disk.
English

69
 4.6 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Intel(R) Thunder-
bolt, Super IO Configuration, ACPI Configuration, USB Configuration and Trusted
Computing.

Setting wrong values in this section may cause the system to malfunction.

UEFI Configuration
UEFI Setup Style
Select the default mode when entering the UEFI setup utility.

Active Page on Entry

Select the default page when entering the UEFI setup utility.

Full HD UEFI
When [Auto] is selected, the resolution will be set to 1920 x 1080 if the monitor
supports Full HD resolution. If the monitor does not support Full HD resolution,
English

then the resolution will be set to 1024 x 768. When [Disable] is selected, the
resolution will be set to 1024 x 768 directly.

70
 Z390 Steel Legend

4.6.1 CPU Configuration

Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so
that the overall performance on threaded software is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6,
C7 and C10 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C3 State Support

Enable C3 sleep state for lower power consumption.

CPU C6 State Support

English

Enable C6 sleep state for lower power consumption.

CPU C7 State Support

71
 Enable C7 sleep state for lower power consumption.

CPU C10 State Support

Enable C10 sleep state for lower power consumption.

Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

CFG Lock
This item allows you to disable or enable the CFG Lock.

CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.

Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.

Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.

Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.

Software Guard Extensions (SGX)

Use this item to enable or disable Software Controlled Software Guard Extensions
(SGX).
English

72
 Z390 Steel Legend

4.6.2 Chipset Configuration

Primary Graphics Adapter

Select a primary VGA.

Above 4G Decoding
Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space
(only if the system supports 64 bit PCI decoding).

VT-d
Intel® Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.

SR-IOV Support
Enable/disable the SR-IOV (Single Root IO Virtualization Support) if the system
has SR-IOV capable PCIe devices.

PCIE1 Link Speed

Select the link speed for PCIE1.
English

PCIE2 Link Speed

Select the link speed for PCIE2.

73
 PCIE3 Link Speed
Select the link speed for PCIE3.

PCIE4 Link Speed

Select the link speed for PCIE4.

PCIE5 Link Speed

Select the link speed for PCIE5.

PCI Express Native Control

Select Enable for enhanced PCI Express power saving in OS.

PCIE ASPM Support

This option enables/disables the ASPM support for all CPU downstream devices.

PCH PCIE ASPM Support

This option enables/disables the ASPM support for all PCH PCIE devices.

DMI ASPM Support

This option enables/disables the control of ASPM on CPU side of the DMI Link.

PCH DMI ASPM Support

This option enables/disables the ASPM support for all PCH DMI devices.

Share Memory
Configure the size of memory that is allocated to the integrated graphics processor when
the system boots up.

IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics enabled at all times.

Inte(R) Ethernet Connection I219-V

Enable or disable the onboard network interface controller (Intel® I219V).

Onboard HD Audio
English

Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and

automatically disable it when a sound card is installed.

74
 Z390 Steel Legend

Front Panel
Enable/disable front panel HD audio.

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

Onboard WAN Device

Enable/disable the onboard WAN device.

WAN Radio
Enable/disable the WiFi module's connectivity.

Bluetooth
Enable/disable the bluetooth.

Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.

Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

Turn On Onboard LED in S5

Turn on/off the LED in the ACPI S5 state.

Restore Onboard LED Default

Restore the onboard LED default value.

RGB LED
This option enables/disables the RGB LED.
English

75
 4.6.3 Storage Configuration

SATA Controller(s)
Enable/disable the SATA controllers.

SATA Mode Selection

[AHCI] Supports new features that improve performance.

[Intel RST Premium (RAID)] Combine multiple disk drives into a logical unit.

SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.

Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.
English

76
 Z390 Steel Legend

4.6.4 Intel® Thunderbolt

Discrete Thunderbolt(TM) Support

Enable or disable the Discrete Thunderbolt(TM) Support.

Thunderbolt Boot Support

Enabled to allow booting from Bootable devices which are present behind
Thunderbolt.

Thunderbolt Usb Support

Enabled to allow booting from Usb devices which are present behind Thunderbolt.

Titan Ridge Workaround for OSUP

Enable or disable Titan Ridge Workaround for OSUP.

Security Level
This item allows you to choose a security level for the Thunderbolt ports.

SW SMI on TBT hot-plug

English

When enbled, BIOS generates software SMI to assign resource to TBT devices.

ACPI Notify on TBT Hot-plug

When enbled, BIOS generates ACPI Notify.

77
 Windows 10 Thunderbolt support
Specify Windows 10 Thunderbolt support level.

Disabled: No OS native support.

Enabled: OS Native support only. no RTD3.

English

78
 Z390 Steel Legend

4.6.5 Super IO Configuration

Serial Port
Enable or disable the Serial port.

Serial Port Address

Select the address of the Serial port.

PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto. English

79
 4.6.6 ACPI Configuration

Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.

ACPI HPET Table

Enable the High Precision Event Timer for better performance and to pass WHQL
tests.

PS/2 Keyboard S4/S5 Wakeup Support

Allow the system to be waked up by a PS/2 Keyboard in S4/S5.

PCIE Devices Power On

Allow the system to be waked up by a PCIE device and enable wake on LAN.

I219 LAN Power On

Allow the system to be waked up by I219 LAN.

Ring-In Power On
English

Allow the system to be waked up by onboard COM port modem Ring-In signals.

RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let

80
 Z390 Steel Legend

it be handled by your operating system.

USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.

USB Mouse Power On

Allow the system to be waked up by an USB mouse.

English

81
 4.6.7 USB Configuration

Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
English

82
 Z390 Steel Legend

4.6.8 Trusted Computing

Security Device Support

Enable or disable BIOS support for security device.

English

83
 4.7 Tools

ASRock Polychrome RGB

ASRock Polychrome RGB allows you to adjust the RGB LED color to your liking.

UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.

Easy RAID Installer

Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. After copying the drivers please change the SATA mode to
RAID, then you can start installing the operating system in RAID mode.

SSD Secure Erase Tool

Use this tool to securely erase SSD.
English

84
 Z390 Steel Legend

Event Logs
Use this to configure event log settings.

Erase Event Log

Choose options for erasing Smbios Event Log. Erasing is done prior to any logging
activation during reset.

View Event Log

View the Event Log records.

Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
UEFI.

Internet Flash - DHCP (Auto IP), Auto

ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.
English

85
 Network Configuration
Use this to configure internet connection settings for Internet Flash.

Internet Setting
Enable or disable sound effects in the setup utility.

UEFI Download Server

Select a server to download the UEFI firmware.
English

86
 Z390 Steel Legend

4.8 Hardware Health Event Monitoring Screen

This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.

Fan Tuning
Measure Fan Min Duty Cycle.

Fan-Tastic Tuning
Select a fan mode for CPU Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

CPU Fan 1 Setting

Select a fan mode for CPU Fan 1, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.

CPU Fan 1 Step Up

Set the value of CPU Fan 1 Step Up.

CPU Fan 1 Step Down

English

Set the value of CPU Fan 1 Step Down.

CPU_FAN2 / W_Pump Switch

Select CPU Water Pump mode.

87
 CPU Fan 2 Control Mode
Select PWM mode or DC mode for CPU Fan 2.

CPU Fan 2 Setting

Select a fan mode for CPU Fan 2, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

CPU Fan 2 Step Up

Set the value of CPU Fan 2 Step Up.

CPU Fan 2 Step Down

Set the value of CPU Fan 2 Step Down.

CHA_FAN1 / W_Pump Switch

Select Chassis Fan 1 or Water Pump mode.

Chassis Fan 1 Control Mode

Select PWM mode or DC mode for Chassis Fan 1.

Chassis Fan 1 Setting

Select a fan mode for Chassis Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 1 Temp Source

Select a fan temperature source for Chassis Fan 1.

Chassis Fan 1 Step Up

Set the value of Chassis Fan 1 Step Up.

Chassis Fan 1 Step Down

Set the value of Chassis Fan 1 Step Down.

CHA_FAN2 / W_Pump Switch

Select Chassis Fan 2 or Water Pump mode.

Chassis Fan 2 Control Mode

English

Select PWM mode or DC mode for Chassis Fan 2.

Chassis Fan 2 Setting

Select a fan mode for Chassis Fan 2, or choose Customize to set 5 CPU temperatures

88
 Z390 Steel Legend

and assign a respective fan speed for each temperature.

Chassis Fan 2 Temp Source

Select a fan temperature source for Chassis Fan 2.

Chassis Fan 2 Step Up

Set the value of Chassis Fan 2 Step Up.

Chassis Fan 2 Step Down

Set the value of Chassis Fan 2 Step Down.

CHA_FAN3 / W_Pump Switch

Select Chassis Fan 3 or Water Pump mode.

Chassis Fan 3 Control Mode

Select PWM mode or DC mode for Chassis Fan 3.

Chassis Fan 3 Setting

Select a fan mode for Chassis Fan 3, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 3 Temp Source

Select a fan temperature source for Chassis Fan 3.

Chassis Fan 3 Step Up

Set the value of Chassis Fan 3 Step Up.

Chassis Fan 3 Step Down

Set the value of Chassis Fan 3 Step Down.
English

89
 4.9 Security Screen
In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.

Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.

User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.

Secure Boot
Use this item to enable or disable support for Secure Boot.

Intel(R) Platform Trust Technology

Enable/disable Intel PTT in ME. Disable this option to use discrete TPM Module.
English

90
 Z390 Steel Legend

4.10 Boot Screen

This section displays the available devices on your system for you to configure the
boot settings and the boot priority.

Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. The VBIOS must support UEFI GOP if you are using
an external graphics card. Please notice that Ultra Fast mode will boot so fast that
the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to
UEFI utility in Windows.

Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.

Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.

Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.

Boot Beep
English

Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.

91
 Full Screen Logo
Enable to display the boot logo or disable to show normal POST messages.

AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Boot Failure Guard Message

If the computer fails to boot for a number of times the system automatically restores
the default settings.

CSM (Compatibility Support Module)

CSM
Enable to launch the Compatibility Support Module. Please do not disable unless
you’re running a WHCK test.

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
English

execute both legacy and UEFI option ROM.

92
 Z390 Steel Legend

Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.

Other PCI Device ROM Priority

For PCI devices other than Network. Mass storage or Video defines which OpROM
to launch.

English

93
 4.11 Exit Screen

Save Changes and Exit

When you select this option the following message, “Save configuration changes
and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP
UTILITY.

Discard Changes and Exit

When you select this option the following message, “Discard changes and exit
setup?” will pop out. Select [OK] to exit the UEFI SETUP UTILITY without saving
any changes.

Discard Changes
When you select this option the following message, “Discard changes?” will pop
out. Select [OK] to discard all changes.

Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.

Launch EFI Shell from filesystem device

Copy shellx64.efi to the root directory to launch EFI Shell.
English

94
Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at https://event.asrock.com/tsd.asp

ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

ASRock EUROPE B.V.

Bijsterhuizen 11-11

6546 AR Nijmegen

The Netherlands

Phone: +31-24-345-44-33

Fax: +31-24-345-44-38

ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710

U.S.A.

Phone: +1-909-590-8308

Fax: +1-909-590-1026
 DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2.1077(a)

Responsible Party Name: ASRock Incorporation

Address: 13848 Magnolia Ave, Chino, CA91710

Phone/Fax No: +1-909-590-8308/+1-909-590-1026

hereby declares that the product

Product Name : Motherboard

Model Number : Z390 Steel Legend

Conforms to the following specifications:

FCC Part 15, Subpart B, Unintentional Radiators

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Representative Person’s Name: James

Signature :

Date : May 12, 2017

EU Declaration of Conformity

For the following equipment:
Motherboard
(Product Name)
Z390 Steel Legend / ASRock
(Model Designation / Trade Name)
ASRock Incorporation
(Manufacturer Name)
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.)
(Manufacturer Address)

‫ ڛ‬EMC —Directive 2014/30/EU (from April 20th, 2016)

☐ EN 55022:2010/AC:2011 Class B ‫ ڛ‬EN 55024:2010/A1:2015
‫ ڛ‬EN 55032:2012+AC:2013 Class B ‫ ڛ‬EN 61000-3-3:2013
‫ ڛ‬EN 61000-3-2:2014

☐ LVD —Directive 2014/35/EU (from April 20th, 2016)

☐ EN 60950-1 : 2011+ A2: 2013 ☐ EN 60950-1 : 2006/A12: 2011

‫ ڛ‬RoHS — Directive 2011/65/EU

‫ ڛ‬CE marking

(EU conformity marking)

ASRock EUROPE B.V.

(Company Name)
Bijsterhuizen 1111 6546 AR Nijmegen The Netherlands
(Company Address)
Person responsible for making this declaration:

(Name, Surname)
A.V.P
(Position / Title)
April 26, 2019
(Date)
P/N: 15G062155001AK V1.1