- Code (DR) Information required.

- E ns ure full c omp lianc e w ith th ermal requirements , v erify th e th ic k nes s and dens ity of th e s ub mitted ins ulation lay er.
- V erify th e th ic k nes s of th e s ub mitted c ement b oard lay er.
- A ll s teel memb ers s h all b e g alv aniz ed s teel 0 .9 mm th ic k nes s as p er s p ec ific ations .
MADA GYPSUM COMPANY
[MADA PLUS SYSTEMS]

TECHNICAL SUBMITTAL
 PROJECT: THE AVENUES RIYADH

MATERIAL APPROVAL SUBMITTALS

Item Description Compliance

Comp
Co mplianc
No. Yess
Y
Ye No N/A
1 Name of Manufacturer and Contact details
2 Manufacturer’s catalogue of relevant product only or Data sheet.
3 Manufacturer’s relevant Product Specification
4 Statement of Compliance with Specified Reference Standards / Con Contract
ontr
tractt
Specification.
5 Testing by Recognized Testing Agency of relevant / specificc product.
6 Mill Certificate (If applicable)
7 History of Previous Approvals or Submittal on Project only list.
lis
ist.
t.
8 Product Certifications from SASO, BSI, EU and / or UL
9 Design Approval Request
10 Warranties
11 Project specification
12 Reference list
13 LEED V4 Questionnaire-Attached (Stamp) p)
14 Beneficial Impact (RFA)

Syed Jahed
[Specification Engineer]

Name: Sign
Si
Signature:
gnatur
uree: Date:09/04/2023

Page 1 of 1
NAME OF MANUFACTURER
AND CONTACT DETAILS
KDWEzED͗D'zW^hDKDWEz

Z/z,Z'/KEDE'Z͗ <,>/h>>,

K&&/Z^^͗/DZh>Y/^^dZd͕'ŶŽ͗ϵϯ

KEddd/>^͗нϵϲϲϱϬϲϰϯϮϱϲϭ

ŽƉLJƌŝŐŚƚƐDĂĚĂ'LJƉƐƵŵŽŵƉĂŶLJ͘ůůZŝŐŚƚƐZĞƐĞƌǀĞĚͮ^ĂƵĚŝƌĂďŝĂͮdĞů͗;ϬϬϵϲϲͿϭϰϯϮϱϯϮϱϯͮ &Ădž͗нϵϲϲϭϰϯϮϱϬϰϮϬ
 CEMENT BOARD PARTITION

Copyrights Mada Gypsum Company. All Rights Reserved | Saudi Arabia | Tel: (00966) 14 325 3253 | Fax: +966 14 325 0420
 DEPENDENT LINER PARTITION
WALL TYPE W19

System Construction
Material Description Units Side A Side B
Board Type 12 mm Substrate Wall Mada Fiber Cement board
Board Layers - 1
Metal Framing : C- Stud 0.90 mm Size 48 mm Spacing 600 mm
Metal Framing : DHT 0.90 mm Size 50 x 50 x 50mm flanges - For Top
Metal Framing : U - Track 0.90 mm Size 50 x 32 x 32mm flanges - For Bottom
Metal Framing : U - Track 0.90 mm Size 50 x 32 x 32mm Bracing & Noggins
Anchor M6 x 55mm Trubolt Anchor
Bracing Anchor Wall Plug Anchor, HIT M5 x 35/15P
Insulation 50 mm Mada Rockwool Insulation 50kg/m3
M3.5 x 25 mm Procem Self Drilling Screw
Drywall Screws
M4.2 x 13mm Wafer Head Screw
Finishing Mada Fibre Joint Tape & Mada Cement Jointing Compound/Basecoat
Sealant SECTIONAL ELEVATION Mada Fire Guard Acrylic Sealant PLAN VIEW Optional

Mada Anchor

Mada Fire Guard PLAN VIEW

Acrylic Sealant

Mada DHT
Mada Drywall Screw

Mada U-Track as bracing bend on

flanges and fixed @ 1200 mm

Mada Fiber Cement Baord

System Performance Criteria
Project/SBC
Description MGC System Compliance
Requirement
Mada Insulation Fire Rating N/A N/A Comply
Acoustic Rating N/A N/A Comply
Mada C-Stud
Wall thickness 62.5 mm 62.5 mm Comply
Wall Plug Anchor,
HIT M5 x 35/15P @Every Load (UDL) 0.25 kPa 0.25 kPa Comply
Bracing
Deflection Limit L/240 L/240 Comply
Mada U-Track
Mada Drywall Screw Height (mm) N/A 3500 Comply
Horizontal and vertical board joints are to be staggered from side to
Mada Fire Guard side and layer to layer.
Acrylic Sealant Horizontal board cut joints to be backed up by metal profile (Flat strap
or fixing channel or noggins) to achieve the fire rating.
The maximum height of liner partition is based on the height of
substrate (block wall / concrete wall) it is being fixed to.
Mada Anchor * Fire and Acoustic Performance Depend Upon Background.
Head fixing details are for illustrative purpose only. For head detail
other than concrete slab, consult MGC Technical Department.
Copyrights Mada Gypsum Company. All Rights Reserved | Saudi Arabia | Tel: (00966) 14 325 3253 | Fax: +966 14 325 0420
www.madagypsum.com

MADA
FIBER
CEMENT BOARD
Technical Data Sheet TDS-FCB-R02-Rev2 Fiber Cement Board - 2024

Advantage Fire Termite Sound &

resistance resistance thermal
insulation

Easy to Weather High

work with resistance impact
strength

Easy to Radiation Chemical

decorate resistance resistance

Product Description Mada Fiber Cement Board is manufactured according to ASTM C-1186 standards. It is available
in standard dimension with smooth texture finish to meet the requirements of modern buildings
for interior and exterior applications.

Field of Application Mada Fiber Cement Board is a flexible and aesthetically appealing product suitable for wall
paneling, false ceiling, mezzanine flooring, fire rated partitions, acoustic partitions, wet area
application, external application, etc.

Manufacturing Mada Fiber Cement Boards are manufactured in accordance with ASTM C1186 & tested
Standard according to ASTM C1185 & ASTM E84.

Tested and Certified as part of complete Mada System to ASTM E119 for Fire Rated Systems

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|2
 MADA FIBER CEMENT BOARD
MADA PLUS REGULAR PLASTERBOARD

TECHNICAL
DATA SHEET

Technical Test Mada Fiber Cement Board

Specification
Dimension 2400 mm ×1200 mm
Thickness 6mm, 8mm, 9mm, 12mm, 15mm, 16mm, 18mm
Special Thickness can be produced on demand
Edges Squared
Density 1.3 g/cm3 + 0.05 g/cm3
Flexural Strength Wet Strength: > 7.0 MPa (Grade 2)
Water Absorption < 35%
Water Tightness PASS
Moisture Movement 0.04
Moisture Content < 12%
Thermal Conductivity at 250°C 0.15 w/m.K
Ph Value 7-8
Acoustic Rating (Mada System application) -Tested as per ASTM E90

Fire Resistant Properties Mada Fiber Cement Board

Combustibility Class ‘0’ - Non Combustible
Ignitibility PASS
Fire Propagation Index I=0
Surface Spread Of Flame Class - 1
*Given test results are based on 9mm thick specimen

Handling and Mada Fiber Cement Board to be stored on pallets or on a pack of boards and supported evenly on
Storage a firm, dry, level, and structurally sound floor.
Protect Mada Fiber Cement Board from direct rain, sunlight or other extensive weather conditions.
Mada Fiber Cement Board to be stored in dry area inside the building which is ready to receive
drywall fixings.
Cover it with plastic sheet or tarpaulin.
Use forklift for the horizontal transportation and designed hoists for vertical transportation
of pallets.
Loose Mada Fiber Cement Board must be handled by two people. The board must be lifted in a
vertical direction to avoid breaking due to flexing.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department”
2|2
www.madagypsum.com

MADA
WALL STUD
(C-STUD)
Technical Data Sheet TDS-MM-R04-Rev1 WALL STUD (C-STUD) - May 2022

Product Description Manufactured from cold-rolled steel using a Hot-Dipped Galvanization process
conforming to ASTM 653, our studs connect the top and bottom wall tracks via a friction
fit. Mada’s Wall Studs (C-Stud) feature a knurled surface for superior strength, increased
stiffness, and less screw slippage.

Field of Application Non-load bearing partition systems

Liner systems
Metal stud ceiling systems
And other non-load bearing assemblies

Tested and Certified to meet and exceed ASTM E119 for Fire Rated Systems

MGC reserves the right to update technical parameters per its own discretion. For official use of this TDS, please consult the Mada Technical Department 1 | 02
 MADA WALL STUD(C-STUD)

TECHNICAL
DATA SHEET

Manufacturing All Mada Metal Profiles are manufactured to meet or exceed ASTM C645 and ASTM C955.
Standards Galvanized Steel Coils meet or exceed ASTM A653.
For recommended storage and installation, please refer to ASTM C754 and ASTM C1007.

Product Description Technicals Parameters

Characteristics
Coating Z120, Z180 & Z275
Yield Strength 240MPa-310MPa
Tensile Strength 340MPa - 420MPa
Material Galvanized Steel
Flanges (mm) (F) 32/32, 34/36
Lip (mm) 4.5, 5.0, 5.5 & 6.0
Length Minimum 3m and varies as
per project requirement
Thickness (mm), [TCT] 0.50, 0.55, 0.60, 0.70, 0.80,

F
0.90, 1.00, 1.20 & 1.50.
Sizes (mm), [Depth] (D) 40, 48, 58, 68, 73, 90, 98, 148
& 198 D

Recommendations Use Mada Wafer Head Screw for metal-to-metal connection.

Use Mada Wall Track and Mada Deflection Head Track for partition installation.
Contact [email protected] for additional information.

Material Storage Metal products are available in both pack and sub-pack quantities and should be handled in
and Handling accordance with the recommendations contained in Local Health and Safety at Work
Principles and Practices.
Use only properly trained and licensed operators when for mechanical lifting or movement.
Store metal products away from airborne contaminants such as acid or salt spray in an
environmentally friendly area.
Always wash hands for personal hygiene and before eating/drinking. Those with sensitive skin
conditions should seek medical advice before prolonged handling of metal products.
When cutting metal profiles, always wear non-fogging goggles for maximum eye protection.
Consult the Mada System Guide for additional information about related systems and installations.
Refer to Mada Safety Data Sheet for additional guidance with health and safety, storage, and handling.

Cold-Formed Steel North American Specification for the Design of Cold-Formed Steel Structural Members
Design References (AISI S100 and AISI S200).
Analysis and Design of Cold Formed Members per the LRFD and ASD Methods.

General Notes This product should not be used for purposes other than those shown on the Mada
Technical Proposal.
This product is a component of the Mada Plus System. Our System Performance Warranty
applies to only framing systems made up entirely of Mada Plus System components.
As products are improved, Mada Gypsum Company may amend this information as needed,
without prior notice. Please refer to www.madagypsum.com for the latest information.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 2 | 02
www.madagypsum.com

MADA
(U-TRACK)
WALL TRACK
Technical Data Sheet TDS-MM-R02-Rev1 WALL TRACK - May 2022

Product Description Manufactured from cold-rolled steel using a Hot-Dipped Galvanization process conforming
to ASTM 653, Mada Wall Track (U-Track) supports the wall or soffit studs of assemblies where
vertical deflection is not needed or required. Mada’s Wall Track (U-Track) features a knurled
surface for superior strength, increased stiffness, and less screw slippage.

Field of Application Non-load bearing partition systems

Liner systems
Metal stud ceiling systems
And other non-load bearing assemblies

Tested and Certified to meet and exceed ASTM E119 for Fire Rated Systems

MGC reserves the right to update technical parameters per its own discretion. For official use of this TDS, please consult the Mada Technical Department 1 | 02
 MADA (U-TRACK) WALL TRACK

TECHNICAL
DATA SHEET

Manufacturing All Mada Metal Profiles are manufactured to meet or exceed ASTM C645 and ASTM C955.
Standards Galvanized Steel Coils meet or exceed ASTM A653.
For recommended storage and installation, please refer to ASTM C754 and ASTM C1007.

Product Description Technicals Parameters

Characteristics
Coating Z120, Z180 & Z275
Yield Strength 240MPa - 310MPa
Tensile Strength 340MPa - 420MPa
Material Galvanized Steel
Flanges (mm) (F) 32/32, 27/27
Length 3000 mm
Thickness (mm), [TCT] 0.50, 0.55, 0.60, 0.70, 0.80,

F
0.90, 1.00, 1.20 & 1.50.

Sizes (mm), [Depth] (D) 42, 50, 60, 62, 70, 75, 90, 92,
100,125,150 & 200
D

Recommendations Use Mada Anchors to attach Mada Wall Track on the substrate.
Use Mada Wafer Head Screw for metal-to-metal connection.
Use only Mada Wall Stud (C-Stud) for most partition installation.
Contact [email protected] for additional information.

Material Storage Metal products are available in both pack and sub-pack quantities and should be handled in
and Handling accordance with the recommendations contained in Local Health and Safety at Work
Principles and Practices.
Use only properly trained and licensed operators when for mechanical lifting or movement.
Store metal products away from airborne contaminants such as acid or salt spray in an
environmentally friendly area.
Always wash hands for personal hygiene and before eating/drinking. Those with sensitive skin
conditions should seek medical advice before prolonged handling of metal products.
When cutting metal profiles, always wear non-fogging goggles for maximum eye protection.
Consult the Mada System Guide for additional information about related systems and installations.
Refer to Mada Safety Data Sheet for additional guidance with health and safety, storage, and handling.

Cold-Formed Steel North American Specification for the Design of Cold-Formed Steel Structural Members
Design References (AISI S100 and AISI S200).
Analysis and Design of Cold Formed Members per the LRFD and ASD Methods.

General Notes This product should not be used for purposes other than those shown on the Mada
Technical Proposal.
This product is a component of the Mada Plus System. Our System Performance Warranty
applies to only framing systems made up entirely of Mada Plus System components.
As products are improved, Mada Gypsum Company may amend this information as needed,
without prior notice. Please refer to www.madagypsum.com for the latest information.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 2 | 02
www.madagypsum.com

MADA (DHT)
DEFLECTION
HEAD TRACK
Technical Data Sheet TDS-MM-R01-Rev1 DEFLECTION HEAD TRACK - May 2022

Product Description Mada DHT (Deflection Head Track) supports the wall or soffit studs, allowing for the vertical
deflection of floor beams and floor decks above. Our DHT track features a knurled surface for
superior strength, increased stiffness, and less screw slippage.

Field of Application Our Deflection Head Track (DHT) can be used for:

Non-load bearing partition systems

Liner systems
Metal stud ceiling systems
And other non-load bearing assemblies

Tested and Certified to meet and exceed ASTM E119 for Fire Rated Systems

MGC reserves the right to update technical parameters per its own discretion. For official use of this TDS, please consult the Mada Technical Department 1 | 02
 MADA (DHT) DEFLECTION HEAD TRACK

TECHNICAL
DATA SHEET

Manufacturing All Mada Metal Profiles are manufactured to meet or exceed ASTM C645 and ASTM C955.
Standards Galvanized Steel Coils meet or exceed ASTM A653.
For recommended storage and installation, please refer to ASTM C754 and ASTM C1007.

Product Description Technicals Parameters

Characteristics
Coating Z120, Z180 & Z275
Yield Strength 240MPa - 310MPa
Tensile Strength 340MPa - 420MPa
Material Galvanized Steel D

Flanges (mm) (F) 50/50

Length 3000 mm
Thickness (mm), [TCT] 0.50, 0.55, 0.60, 0.70, 0.80,

F
0.90, 1.00, 1.20 & 1.50.

Sizes (mm), [Depth] (D) 42, 50, 60, 62, 70, 75, 90, 92,
100,125,150 & 200

Recommendations Use Mada Anchors to fix Mada Wall Track on the substrate.
Use Mada Wafer Head Screw for metal-to-metal connection.
Use Mada Wall Stud (C-Stud) for most partition installation.
Contact [email protected] for additional information.

Material Storage Metal products are available in both pack and sub-pack quantities and should be handled in
and Handling accordance with the recommendations contained in Local Health and Safety at Work
Principles and Practices.
Use only properly trained and licensed operators when for mechanical lifting or movement.
Store metal products away from airborne contaminants such as acid or salt spray in an
environmentally friendly area.
Always wash hands for personal hygiene and before eating/drinking. Those with sensitive skin
conditions should seek medical advice before prolonged handling of metal products.
When cutting metal profiles, always wear non-fogging goggles for maximum eye protection.
Consult the Mada System Guide for additional information about related systems and installations.
Refer to Mada Safety Data Sheet for additional guidance with health and safety, storage, and handling.

Cold-Formed Steel North American Specification for the Design of Cold-Formed Steel Structural Members
Design References (AISI S100 and AISI S200).
Analysis and Design of Cold Formed Members per the LRFD and ASD Methods.

General Notes This product should not be used for purposes other than those shown on the Mada
Technical Proposal.
This product is a component of the Mada Plus System. Our System Performance Warranty
applies to only framing systems made up entirely of Mada Plus System components.
As products are improved, Mada Gypsum Company may amend this information as needed,
without prior notice. Please refer to www.madagypsum.com for the latest information.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 2 | 02
www.madagypsum.com

MADA TRUBOLT STUD

ANCHOR
Technical Data Sheet TDS-ACC-R32-Rev1 Trubolt Stud Anchor - July 2022

Product Description Mada Trubolt Stud Anchor is a true-to-size, heavy duty, torque controlled expansion anchor, for
permanent anchoring into concrete. The anti-rotation expansion three leg sleeve is designed
to grip the sides of the hole distribute the sleeve on the whole core, preventing anchor rotation
during installation.

Field of Application Applicable in CMU walls, Solid concrete walls, concrete(slab, beams, columns, etc.).

Manufacturing Body : Cold formed steel, DIN 1654, part 2 or 4 / Zinc electroplated Zn5C/Fe (5 μm), NFA 91102,
Standards Sleeve : S355 MC as per NF EN 10- 149-2, Nut : Steel strength grade 6 or 8, ISO 898-2 &
Washer : Steel, NF E 25513, 25514

Product Parameters Details

Characteristics
Fixing Method Through fixture
Coating Galvanized
Setting Method Torque controlled
Material Cold Formed Steel
Supplier SPIT or other equivalent approved by Mada
Maximum Shear Load 14.9 kN (C20/C25)
Maximum Tensile Load 9.1 kN (C20/C25)
Sizes (mm) M6 x 55, M6 x 65, M8 x 65 and M8 x 95
Packing 100Pcs/Box and 50Pcs/Box

Handling and The dimensions and weight of the packaging vary depending on the size. Consider load centers
Storage when loading trucks.
Puncture resistant gloves and safety goggles should used when handling the product.
Store in dry conditions.
The products do not pose a fire hazard. However, the protective coating may be combustible
and can emit hazardous fumes. Use uistable extinguishing means: water, foam, carbon dioxide
or dry powder.

Installation Torque controlled expansion anchor, installed by ammering

Guidelines the bolt through the fixture. Expansion clip profile ensures
the anchor pregrips the hole surface prior to setting.
Tightening the anchor pulls into the expansion sleeve expanding
the clip and securing the fixture against the substrate.
The products should not be used for purposes other than those
shown on the Mada Technical Proposal.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|1
www.madagypsum.com

MADA PROCEM SELF DRILLING

SCREW
Technical Data Sheet TDS-ACC-R39-Rev1 Procem Self Drilling Screw - July 2022

Product Description Mada Procem Self Drilling screw with ribs under head has the ability to advance while creating its
own thread and also drills for seating of screw head. It is used for fastening Mada Procem cement
board and other accessories mounting on steel structures up to 1.20mm thick.
Mada Procem Self Drilling screw has fine thread, drill point providing good control in driving and
a wider area than flat heads.

Field of Application Applicable for all Cement Board Drywall systems and other such applications. Requires less
torque to drive than a standard twin fast drywall screw.

Manufacturing In compliance with ASTM C954

Standards

Product Parameters Details

Characteristics
Head Type CSK Flat Head
Coating Yellow Zinc, White Zinc or Black PhosphateThread Type
Thread Type Single Lead
Drive Type #2 Phillips
Material Hardened Steel, AISI 1018 or equivalent steel
Case Hardness Minimum Rockwell C44
Size (mm) M3.9 x 20, M3.9 x 25, M3.9 x 35 and M3.9 x 45

Handling and The dimensions and weight of the packaging vary depending on the size. Consider load centers
Storage when loading trucks.
Puncture resistant gloves and safety goggles should used when handling the product.
Store in dry conditions.
The products do not pose a fire hazard. However, the protective coating may be combustible
and can emit hazardous fumes. Use uistable extinguishing means: water, foam, carbon dioxide
or dry powder.

Installation Overdriving may result in failure of the fastener or stripout of the work surface.
Guidelines The CSK flat head to be fully seated when the head is flush with the work surface.
The products should not be used for purposes other than those shown on the Mada
Technical Proposal.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|1
www.madagypsum.com

MADA WAFER HEAD SELF DRILLING

SCREW
Technical Data Sheet TDS-ACC-R34-Rev1 Wafer Head Self Drilling Screw - July 2022

Product Description Mada Wafer Head Self Drilling screws with a head diameter of 11mm are designed for
assembling steel framing components for up to 3.0mm thick. The additional bearing forces
provided by a wider head mean fewer screws are required.
It is an excellent choice for general purpose, light-to-medium-duty use.

Field of Application Designed for metal-to-metal fixing of light gauge steel framing.

Manufacturing Mada Drywall Screws comply to ASTM C1002-98 and EN 14566 - Type A1.
Standards

Product Parameters Details

Characteristics
Head Type Wafer Head
Coating Yellow Zinc or White Zinc
Thread Type Single Lead
Drive Type #2 Phillips
Fastener Point Grabber
Material Hardened Steel, AISI 1018 or equivalent steel
Case Hardness Minimum Rockwell C44
Size (mm) M4.2 x 13 and M4.8 x 19
Packing 1000Pcs/Box and 500Pcs/Box

Handling and The dimensions and weight of the packaging vary depending on the size. Consider load centers
Storage when loading trucks.
Puncture resistant gloves and safety goggles should used when handling the product.
Store in dry conditions.
The products do not pose a fire hazard. However, the protective coating may be combustible
and can emit hazardous fumes. Use uistable extinguishing means: water, foam, carbon dioxide
or dry powder.

Installation Overdriving may result in failure of the fastener or stripout of the work surface.
Guidelines The wafer head to be fully seated when the head is flush with the work surface.
The products should not be used for purposes other than those shown on the Mada
Technical Proposal.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|1
www.madagypsum.com

MADA FIBER
JOINT TAPE
Technical Data Sheet TDS-ACC-R46-Rev1 Fiber Joint Tape - July 2022

Product Description Mada Fiber Joint Tape is composed of twisted strands of fiber glass woven at right angles to one
another for reinforcing drywall joints. Mada Fiber Joint Tape is easy to apply, eliminates the need
for embedding coat, fuses with the compound for stronger joints, eradicates bedding coat and
provides smooth finished joint.

Field of Application Mada Fiber Joint Tape is self adhering fiber mesh tape for use with setting type joint compounds.

Manufacturing In compliance with ASTM C475 and ASTM C 840.

Standards
Product Parameters Details
Characteristics
Width (mm) 50
Length (m) 90
Mesh Size (mm) 2.85 x 2.85
Mass (g/m²) 65
TensileStrength (N/50mm) 400
Packing 24Rolls/Cartoon

Handling and All materials should be delivered in their original, unopened packages and stored off the
Storage ground in an enclosed shelter and protected from weather. Damaged or deteriorated materials
should be removed.
Good housekeeping and regular safe removal of waste materials are recommended. Avoid contact
with eyes, skin and clothing. Minimize generation of dust.
Fiberglass Mesh Tape should not be stacked more than two pallets in height.
Store in a cool, dry ventilated area away from sources of heat, moisture and incompatibilities.
This product has no known adverse effect on ecology.

Installation Guidelines Position the Mada fiber tape and spread jointing compound along each joint.
To minimize the risk of cracking, ensure jointing compound is pushed through the fiber tape well into
any gaps between the plasterboards / cement board.
The products should not be used for purposes other than those shown on the Mada
Technical Proposal.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|1
www.madagypsum.com

MADA
ROCKWOOL
INSULATION
Technical Data Sheet SDS-ACC-R08-Rev1 Mada Rockwool - June 2022

Advantage Rot-proof. Zero depletion Zero global

potential (ODP) warming
potential (GWP)

Reducing
green house
effect

Product Description Rockwool is an insulating material manufactured from natural minerals mainly basalt which is
melted at very high temperature and spun using advanced production techniques. The fibers
are then bonded with minimum quantity of thermosetting resin binder and special additives.
It has good Thermal & Acoustic properties, Rockwool is light in weight, strong, re-silent, and
easy to handle cut intricate to suit shapes.

Field of Application Applicable for all Drywall Systems and all such applications.

Manufacturing Rockwool insulation complies to ASTM C665, ASTM C177, ASTM C518, BS 874:1986 and BS 476.
Standard

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|2
 MADA ROCKWOOL INSULATION

TECHNICAL
DATA SHEET

Technical Parameters Detail

Specification
Color Yellowish
Rigidity Semi-Flexible
Supplier Saudi-Rockwool, SIIMCO or other equivalent
approved by Mada
Water vapor sorption < 1 (Weight %) ASTM C1104
Thickness (mm) 50, 75, 100
Density (kg/m3) 40, 48, 64, 80, 100
Max. use temperature 7500C, ASTM C411
Thermal Conductivity 0.036 – 0.040 (w/mK)
NRC 0.7-1.0, ASTM C423
Flame Index 0, ASTM E84
Smoke Developed 0, ASTM E84
Fungal Resistance Nil, ASTM C665
Packing (1.2 x 0.6) m / Slab

Handling and Handling – unpack material at application site to avoid unnecessary handling of product. keep
Storage work areas clean.
Avoid unnecessary handling of scrap material and debris by placing such materials in suitable
containers, whichshould be kept as close to the work area as possible.
Ensure good ventilation. local exhaust ventilation may be required if the method of use produces
dust levels which exceed applicable exposure limits.
Avoid excessive eye and skin contact with dusts and fibers.
Use recommended cleanup rocedures to avoid buildup of dusts and fibers in the work area.
Material Storage - keep material in original packaging until it is to be used Store material to
protect against adverse conditions including precipitation.
Health Hazard - Inhalation: inhalation of dust can cause nose, throat lungs and upper respiratory
tract irritation. persons exposed to dust may be forced to leave area because of nuisance
conditions such as coughing, sneezing and nasal irritation. Eye Contac : direct contact will
cause some mechanical irritation. Skin Contact: may cause transitory mechanical dermatitis.

General Note The products should not be used for purposes other than those shown on the
Mada Technical Proposal.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 2|2
www.madagypsum.com

MADA
CEMENT JOINTING
COMPOUND / BASECOAT
Technical Data Sheet TDS-JC-R02-Rev1 Cement Jointing Compound - June 2022

Advantage For interior High Exceptional

and exterior flexibility bond to the
applications. substrate

High performance Asbestos-free

Designed for use product
in EIFS system.

Product Description Mada Cement Jointing Compound / Basecoat is composed of Portland cement and dry latex
polymers specially designed for interior and exterior walls, ceilings and EIFS. It is mixed
with water on site and applied, with Mada Joint Tape, on board joints and on inside and
outside corners.

Field of Application Mada Cement Jointing Compound is used for:

First, Second and finishing coat
Patching
Skimming
Using hand or mechanical tools

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 1|2
 MADA CEMENT JOINTING COMPOUND / BASECOAT

TECHNICAL
DATA SHEET

Manufacturing Mada Cement Jointing Compound / Basecoat is manufactured to meet the standards of EN
Standard 12004, ISO 13007 with a classification of C2TE S1 for Grey.

Product 20kg pail.

Characteristics

Technical Parameters
Specification
Color Grey
Working Time 8 Hr to Dry
Packaging 20kg / Pail
Shelf Life 24 Months

Product Application Pour 4 - 5 liters of water in a container. Use a cage-type paddle driven by a heavy-duty drill
capable of producing 300 to 450 rpm. Start the drill and slowly add Mada Cement Jointing
Compound / Basecoat. Mix until obtaining a homogeneous mixture. Add more water if
necessary. The water / cement mixing ratio is 3L / 10kg approximately.
When the mixture is smooth and free of lumps, let it settle for 15 minutes, and then re-mix to a
smooth paste.
The application surface should be clean, dry and free of dust, ice, grease, oil or other
substances that may prevent adhesion..
Fill the joints with Mada Cement Jointing Compound / Basecoat using a hammer-end joint
knife and then place Mada Joint Tape, troweling and removing cement excess in order to
embed the tape. The thickness of the Mada Cement Jointing Compound / Basecoat should
not exceed 1 mm. Remove excess with a flat metal bar and wet wool or polystyrene cloth.
Allow to dry for at least 4 hours.
Once the joints are dry, apply a uniform layer of 2 mm thick over the entire surface of Mada
Cement Jointing Compound / Basecoat with a flat trowel. Allow to dry for at least 24 hours
before applying any seal or finish.

Handling and Dust may cause irritation to eyes, skin, nose, throat and upper respiratory tract. Avoid irritation by
Storage reducing exposure to dust. Use in a well-ventilated area or provide sufficient local ventilation.
Follow good safety/industrial hygiene practices during installation. Wear appropriate personal
protective equipment..
We recommend the following safety equipment:
Mask to protect nose and mouth to prevent dust inhalation.
Safety glasses for protection during cement application.
Gloves, the alkalinity of the product can irritate the skin if the contact is prolonged.
Hard hat, steel-toe boots, tool belt are some of the accessories required to work on site.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this TDS please consult Mada Technical department” 2|2
www.madagypsum.com

MADA
FIBER CEMENT
BOARD
Safety Data Sheet SDS-FCB-R02-Rev1 Fiber Cement Board - July 2022

Product Identification Product Name:

Mada Fiber Cement Board.

Standard Thickness:
6mm, 9mm, 12mm, 18mm.

Contact Information:

Mada Gypsum Company For Emergency Product

Yanbu Al Sinayah 51000 Information Call
P.O.Box 31542 Telephone: +966 14 325 3253
Kingdom of Saudi Arabia
Web: www.madagypsum.com

Composition / Component CAS – Number Weight in % OSHA* PEL Hazard Identification

Information On (mg/m3) Remark
Ingredients
Crystalline Silica 14808-60-7 40-58% 10 mg/m3 Non Hazardous
OPC 65997-15-1 < 40% 15 mg/m 3
Non Hazardous
Cellulose 9004-34-6 <9% 5 mg/m 3
Non Hazardous
Other additives Proprietary <8% NA Non Hazardous
*OSHA Permissible Exposure Limit, 1910.1000, Nuisance Dust (Respirable)
NA = Not Applicable, NE = Not Established

Physical Data Appearance and Odor: with light grey color no significant odor, standard surface
Boiling Point (Degrees F): NA
Melting Point: NA
Vapor Pressure: NA
Percent Volatile by Volume: NA
Specific Gravity (Water = 1): 0.7
Vapor Density (Air = 1): NA
Evaporation Rate (Ethyl Ether = 1): NA
Solubility in Water: Approximately 0.29 - 0.35

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this MSDS please consult Mada Technical department” 1|5
 MADA FIBER CEMENT BOARD

SAFETY
DATA SHEET

Fire And Explosion Flash point: None

Hazard Data Flash Point: NA
Flammable Limits: LEL: NA UEL: NA
Extinguishing Media: Water, foam or dry chemical
Special Fire Fighting Procedures: None
(NFPA Ratings: 4 = Severe Hazard, 3 = Serious Hazard, 2 = Moderate Hazard, 1 = Slight Hazard, 0 = Minimal,
Hazard Flammability: 0, Health: 0, Reactivity: 0)

Unusual Fire and Explosion Hazards: None

Reactivity Data Stability: Stable

Condition to Avoid: High humidity condition on back of panel may cause warping.
Incompatibility: None
Hazardous Decomposition Products: None
Hazardous Polymerization: None

Health Hazard Data Primary Routes of Entry: Inhalation, skin and eye contact.
Health Hazards: (Acute and Chronic)
Inhalation: Acute: This material is not known to be toxic. When cutting with a power saw, a
nuisance dust is created. Persons exposed to large amounts of dust may be forced to leave the
area because of nuisance conditions including coughing, sneezing and nasal irritation.
Chronic: In June 1997, the International Agency for Research on Cancer (IARC) concluded there
is “sufficient evidence” in humans for the carcinogenicity of inhaled crystalline silica in the
form of quartz or cristobalite from occupational sources.

In making the overall evaluation, the Working Group noted that carcinogenicity in humans was
not detected in all industrial circumstances studied. Carcinogenicity may be dependent on
inherent characteristics of the crystalline silica or on external factors affecting its biological
activity or distribution of its polymorphs. IARC states that crystalline silica inhaled in the form of
quartz or cristobalite from occupational sources “is carcinogenic to humans” (Group 1). In June
1987, the International Agency for Research on Cancer (IARC) concluded there is “inadequate
evidence” for the carcinogenicity of glass filaments in humans. IARC states that glass filaments
are “not classifiable as to their carcinogenicity to humans” (Group 3).
Skin Contact: Acute: May dry skin.
Chronic: None known
Eye Contact: Acute: May cause irritation.
Chronic: None known
Exposure Limits: OSHA PEL: 5mg/M3 (respirable nuisance dust); 15 mg/M3 total dust. .

First Aid Measures Signs and symptoms of over exposure: Breathlessness, wheezing, cough, sputum production
First Aid: Swallowed: If swallowed, dilute by drinking large amounts of water. Do not induce
vomiting. Seek medical attention. If unconscious, loosen tight clothing and lay the person on
his/her left side. Give nothing by mouth to an individual who is not alert and conscious.
Eye Contact: Remove contact lens. Flush with running water or saline for at least 15 minutes.
Seek medical attention if redness persists or if visual changes occur.
Skin Contact: Wash with mild soap and water. Contact physician if irritation persists or later
develops. Inhaled: Remove to fresh air. If shortness of breath or wheezing develops, seek
medical attention.
Advice To Doctor: Treat symptomatically.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this MSDS please consult Mada Technical department” 2|5
 MADA FIBER CEMENT BOARD

SAFETY
DATA SHEET

Spill And Leak Procedures for Spills/Leaks: No special precautions, sweep or vacuum material into a waste
Procedures container for disposal. Avoid creating excessive dust.
Waste Disposal Method: May be disposed of as an inert solid in a sanitary landfill or by other
procedures in accordance with all federal, state, and local regulations.
Special Handling/Storage: Store flat in a dry area.

Special Protection Inhalation: Move to fresh air.

Information Skin Contact: Wash promptly with water.
Eye Contact: Flush with water to remove particles. If irritation persists, see a physician

Disposal Consideration Dispose of material as inert, non-metallic mineral in conformance with local regulations.

Transportation There are no special requirements for storage and transport.

Information UN No: None Allocated Dangerous Goods
Class: None Allocated Hazchem
Code: None Allocated Poisons
Schedule: None Allocated
Packing Group: Not Applicable
Label: Local regulations may apply

Special Precautions Ventilation: Local exhaust if PEL is exceeded to minimize dust when power sawing.
Eye Protection: Safety glasses or goggles when power sawing or installing overhead.
Gloves: Not normally required, may be desirable to protect against drying of hands.
Respirator: Not normally required. If cut with a power saw, use local health authority approved
or equivalents approved respirator for nuisance dust if PEL is exceeded.
As of the date of preparation of this document, the foregoing information is believed to be
accurate and is provided in good faith to comply with applicable Laws. However, no
warranty or representation with respect to such information is intended or given.

The fibre cement products in their intact state do not present a health hazard. The controls
below apply to dust generated from the boards by cutting, drilling, routing, sawing, crushing, or
otherwise abrading, and cleaning or moving sawdust.

Keep exposure to dust as low as reasonably possible. Respirable crystalline silica levels should
not exceed exposure limits established by local jurisdictions, and identified in this safety data
sheet. Exposure to respirable (fine) silica dust depends on a variety of factors, including activity
rate (e.g. cutting rate), method of handling (e.g. electric shears), environmental conditions (e.g.
weather conditions, workstation orientation) and control measures used. Wherever possible,
practices likely to generate dust should be carried out in well-ventilated areas (e.g. outside).
The work practices and engineering controls set out in this Safety Sheet should be followed to
reduce silica exposures. Keep away from reactive products. Do not store near food, beverages
or smoking materials. Avoid spilling and creating dust. Maintain appropriate dust controls
during handling. Use appropriate respiratory protection during handling.

“MGC reserves the right to update technical parameters as per its own discretion. For official use of this MSDS please consult Mada Technical department” 3|5
 DEPENDENT LINER PARTITION
WALL TYPE W19

System Construction
Material Description Units Side A Side B
Board Type 12 mm Substrate Wall Mada Fiber Cement board
Board Layers - 1
Metal Framing : C- Stud 0.90 mm Size 48 mm Spacing 600 mm
Metal Framing : DHT 0.90 mm Size 50 x 50 x 50mm flanges - For Top
Metal Framing : U - Track 0.90 mm Size 50 x 32 x 32mm flanges - For Bottom
Metal Framing : U - Track 0.90 mm Size 50 x 32 x 32mm Bracing & Noggins
Anchor M6 x 55mm Trubolt Anchor
Bracing Anchor Wall Plug Anchor, HIT M5 x 35/15P
Insulation 50 mm Mada Rockwool Insulation 50kg/m3
M3.5 x 25 mm Procem Self Drilling Screw
Drywall Screws
M4.2 x 13mm Wafer Head Screw
Finishing Mada Fibre Joint Tape & Mada Cement Jointing Compound/Basecoat
Sealant SECTIONAL ELEVATION Mada Fire Guard Acrylic Sealant PLAN VIEW Optional

Mada Anchor

Mada Fire Guard PLAN VIEW

Acrylic Sealant

Mada DHT
Mada Drywall Screw

Mada U-Track as bracing bend on

flanges and fixed @ 1200 mm

Mada Fiber Cement Baord

System Performance Criteria
Project/SBC
Description MGC System Compliance
Requirement
Mada Insulation Fire Rating N/A N/A Comply
Acoustic Rating N/A N/A Comply
Mada C-Stud
Wall thickness 62.5 mm 62.5 mm Comply
Wall Plug Anchor,
HIT M5 x 35/15P @Every Load (UDL) 0.25 kPa 0.25 kPa Comply
Bracing
Deflection Limit L/240 L/240 Comply
Mada U-Track
Mada Drywall Screw Height (mm) N/A 3500 Comply
Horizontal and vertical board joints are to be staggered from side to
Mada Fire Guard side and layer to layer.
Acrylic Sealant Horizontal board cut joints to be backed up by metal profile (Flat strap
or fixing channel or noggins) to achieve the fire rating.
The maximum height of liner partition is based on the height of
substrate (block wall / concrete wall) it is being fixed to.
Mada Anchor * Fire and Acoustic Performance Depend Upon Background.
Head fixing details are for illustrative purpose only. For head detail
other than concrete slab, consult MGC Technical Department.
Copyrights Mada Gypsum Company. All Rights Reserved | Saudi Arabia | Tel: (00966) 14 325 3253 | Fax: +966 14 325 0420
Statement of Compliance with
Specified Reference Standards
/ Contract Specification.
 Classification | Company General Use

Technical
al Comparison
C / Compliance Sheet
Proposed Material /
Manufacturer/ Specification Remarks
Proposed Material/ Product Properties / Product / Equipment Compliant
Sr. No. Supplier/ Applicator / Section/ Sub- Specification Requirements
ents Drawing Reference (Justify any Deviations
Specification with Model Number (Yes, No)
Installer Section/ Clause from Project Specification)
and Serial Number
SECTION 09 29 00 A. Provide in maximum lengths and widths available Mada Plus Plasterboard is produced with
Mada Gypsum
1 GYPSUM BOARD that will minimize joints in each correspo
h area and correspond following dimension to minimize joints Width: YES
Company
(2.2) with support system indicated.ed. 1200mm Length: 2400mm
Mada PLUS Plasterboard Complying with, ASTM YES
2.2 B. Gypsum Wallboard: To
o ASTM C36. BS EN 520. C1396 /C1396M and EN 520
C. Standard gypsum board.oard. YES
1. Regular Gypsum Board:oard: Gypsum core panel solid
set core enclosed in paper.
Complying with ÅSTM STM C1396. 1. Mada PLUS Regular Plasterboard Complying
a. Product: as approved Engineer
pproved by Engineer. with, ASTM C1396 /C1396M and EN 520 Type A
b. Thickness: 12.5 mm
2.2 b. Thickness: 1/2/2 inch. c. Width: 1200mm
c. Width: 48 or 54 inches. d. Length: 2400mm
d. Length: Use longest length a available to avoid e. Long Edges: Tapered.
joints.
e. Edges: oth
s: Square unless otherwise indicated on the
ngs
drawings
2. Fire
ire resistant gypsum board: Gypsum core panel YES
h a specially formula
with formulated core for use in fire-
resistive
esistive Type. Complying
Comp with ÅSTM C 1396. 2. Mada PLUS Fire Resistant Plasterboard
appro
a. Product: as approved by Engineer. Complying with, ASTM C1396 /C1396M and EN
520 Type I & F
b. Thickness: 1/2 inch.
2.2 b. Thickness: 16 mm
c. Width: 48 or 554 inches. c. Width: 1200mm
d. Length: Use longest length available to avoid d. Length: 2400mm
joints. e. Long Edges: Tapered.
T
e. Edges: Tapered unless otherwise indicated on
drawi
the drawings
3. Mois
Moisture resistant gypsum board: Gypsum core YES
panel with enhanced core formulated for resistance
to m
moisture and mold; surfaced with moisture/mold
res
resistant paper on front, back, and long edges. 3. Mada PLUS Moisture Resistant Plasterboard
C
Complying with ASTM C 1396. Complying with, ASTM C1396 /C1396M and EN
a. Product: as approved by Engineer. 520 Type I & F
b. Thickness: 1/2 inch. b. Thickness: 16 mm
2.2 c. Width: 48 or 54 inches. c. Width: 1200mm
d. Length: Use longest length available to avoid d. Length: 2400mm
joints. e. Long Edges: Tapered.
e. Edges: Tapered unless otherwise indicated on f. Mold resistance score 10 in accordance with
ASTM D3273.
the drawings
f. Mold Resistance: Panel score of 10 (highest rating
available) when tested in accordance with ÅSTM D
3273.
4. Water-Resistant Gypsum Board: Gypsum core YES
panel with enhanced water-resistant core for use
behind tile in wet areas. Complying with ÅSTM C 4. Mada PLUS Moisture Resistant Plasterboard
1396. Complying with, ASTM C1396 /C1396M and EN
a. Product: as approved by Engineer. 520 Type I & F
2.2 b. Thickness: 1/2 inch. b. Thickness: 16 mm
c. Width: 48 or 54 inches. c. Width: 1200mm
d. Length: Use longest length available to avoid d. Length: 2400mm
joints. e. Long Edges: Tapered.
e. Edges: Tapered unless otherwise indicated on
the drawings

Classification | Company General Use

 Classification | Company General Use

2.3 GYPSUM A. Exterior Soffit Board A. Exterior Soffit Board YES

BOARD CEILING 1. Moisture and Mold Resistant Gypsum Board, 1. Mada ProGuard Glass Mat Sheathing Board
AND SOFFIT Paperless Sheathing: Gypsum core Complying with, ASTM C1177 / C1177M Type X
PANELS panel with enhanced core formulated for resistance and EN 15283-1:2008
to moisture and mold, complying b. Thickness: 12.5 mm
b
c. Width: 1200mm
with ÅSTM C 1177. d. Length: 2400mm
ineer.
a. Product: as approved by Engineer. e. Long Edges: Tapered.
b. Thickness: 1/2 inch.
c. Width:48 inches. f. Mold Resistance: Panel score of 10
d. Length:10 feet. (highest rating available) when tested in
e. Edges: Square unless otherwise indicated on the accordance with ÅSTM D 3273
drawings
f. Mold Resistance: Panel
anel score of 10 (hig
(highest rating
available) when tested
ed in
accordance with ÅSTMSTM D 3273.
YES

B. Interior Ceiling
iling Board
1. Regular Gypsum Ceiling BoaBoard: Gypsum Core B. Interior Ceiling Board
resis
panel with enhanced sag resistant 1. Mada PLUS Regular Plasterboard Complying
core. Complying
omplying with ÅSTM C 1396. with, ASTM C1396 /C1396M and EN 520 Type A
2.3 a. Thickness: 12.5 mm
a. Thickness:
kness: 1/2 inch. b. Width: 1200mm
b. Width:
dth: 48 inches. c. Length: 2400mm
c. Length: Use longest length available to avoid d. Long Edges: Tapered.
oints.
joints.
u
d. Edges: Tapered unless otherwise indicated on
the drawings
YES
Mada Metal Profiles are generally in
2.4 METAL STUD
UD
A. Components,
Componen General: Comply with ASTM C754. compliance with ASTM C645, ASTM C754,
SYSTEM
and ASTM C955.

Mada Steel Coils are hot-dipped galvanized YES

B. Stee
Steel Sheet Components: Comply with ASTM as per ASTM ASTM A653, Z120, Z180, and
2.4 C645 requirements for metal and with hot-dip Z275.
galvanized zinc coating.
gal Mada Metal Profiles are generally in
compliance with ASTM C645.
YES
C. Non-Load bearing steel studs with top and
Mada Metal Profiles are generally in
bottom tracks 0.9mm (20 gauge) steel studs shall
2.4 compliance with ASTM C645.
be roll formed, and rigid furring channels,
Metal Thickness: 0.90mm
conforming to ASTM C645.
D. Furring Channels: ASTM C645, flanges not less YES
H. Mada furring channel comply with ASTM
than 38mm edge to be bent back 90
C 645.
degrees and doubled to form a 5mm minimum
1. Thickness: 0.60mm to 0.90
2.4 return, faces knurled and webs provided with use 0 .9 mm.
2. Depth: 22mm
suitable knock-out, pass-through holes. Floor and
Profile Sizes: 70x35x22mm,
ceiling runner channels to be fabricated
from same material as studs.
YES

E.Mada Trubolt Stud Anchor is a true-to

size, heavy duty, torque-controlled
E. Fasteners for Metal Framing: Of type, material,
expansion anchor, for permanent anchoring
size, corrosion resistance, holding power and
2.4 into concrete. The anti-rotation expansion
other properties required to fasten steel members to
sleeve is designed to grip the sides of the
substrates.
hole, preventing anchor rotation during in
stellation. Applicable in CMU walls, Solid
concrete walls, concrete (slab, beams,
columns, etc.)

Classification | Company General Use

 Classification | Company General Use

Indicative working loads in 32 Mpa

Max. Shear Load (kN): 2.8Max.
Tension Load (kN): 3.4

YES
F. Shaftwall Framing Materials.
1. Shaftwall assemblies including channels
ding studs, channels,
runners, struts and fastenerss as
required by CW stud typess of size indicated, as
required by fire rating andd air
resistance, and as approved Engine
roved by the Engineer.
F. Shaftwall Framing Materials.
Members shall conform rm to applicable
1.Mada Plus Shaftwall system assemblies
provisions of ASTM C645, BS EN 520.
including studs, channels, runners and
2. Assembly shall meet the following requirements:
r
fasteners as Required by Mada PLUS Shaft
3. Deflection of the
he shaftwall shall be limited to
2.4 Board/Panels in 25 mm Thick. with Fire &
L/240 of the span
pan in height.
Moisture Resistant in Shaft side.
4. Leakage off Air (Shaftwall): Sha
Shaftwall construction
Comply to ASTM C1396 / C1396M Type X
tight and free from
shall be airtight
Mada CH-Studs, Comply with ASTM C645,
Meeting such
whistling and other noise. Mee
Mada E-Stud, Mada J Runner track,
requirements
ments shall be the reresponsibility of this
Mada J Runner Deflection Head Track
Section,
on, whether or not it b
becomes necessary to
Track Sizes: 66, 102, 152
use additional material and
a labour to
Stud Sizes: 64, 100, & 150
accomplish
complish this result. Such additional materials
Thickness:0.80, 0.90, 1.00, 1.20
and labour (materials as specified or
other proposed matmaterials) shall be included by this
Section at no add
additional cost.
YES

2.5
ACOUSTICAL/FIRE
STICAL/FIRE B. F
Fire Resistive Sealant: High quality, ready to use, B. Mada Fire Guard Sealant is approved for
RESISTING caulking grade, fire resistive silicone
ca Mada Fire and Acoustic rated systems. It is
SEALANT ssealants. developed for use as a joint seal in fire
resistant and sound insulation Mada drywall
systems. As an acrylic based caulk with a
tenacious bond regardless of porosity, it is
easy to use on virtually any job.
Advantages: Easy to apply, Odorless,
Paintable, Good water & Chemical resistant,
Flexible and compressible,
2.6 T
TRIM Mada Trim accessories comply to ASTM YES
A. Trim: Comply with ASTM C 1047.
ACCESSORIES
ACCE C1047
B. Material: Galvanized steel sheet. YES
1. Cornerbead.
1. Cornerbead: Use at outside corners.
2. LC-Bead
2. LC - Bead: Use at exposed panel edges.
3. Control / Expansion joint.
3. Expansion (Control) Joint: Provide as indicated.
2.7 AUXILIARY A. General: Provide auxiliary materials that comply YES
Noted
MATERIALS with referenced installation standards.
Mada Slef Tapping Screw is in comply with YES
B. Steel Screws: Screws for use with furring ASTM C1002, for metal thickness from
channels to ASTM C-1002 to be self-tapping, 0.55mm up to 0.80mm
2.7
type, case hardened, with socketed counter-sunk Mada Self Drilling Screw is in comply with
heads. ASTM C954, for metal thickness from
0.90mm up to 1.50mm
C. Joint treatment materials: Comply with ASTM C Mada Joint Treatment Materials generally YES
2.7
475. comply with ASTM C475/ C475M.

Classification | Company General Use

 Classification | Company General Use

E. Mada Rockwool Insulation complies to

E
BS
B 874:1986 and equivalent ASTM C177,
2.7 E. Sound Attenuation Blankets (Batt
att Insulation): To C518 for Thermal Conductivity and British
BS 3533:1981 ASTM C-665, Type pe I Standard BS 476 for Fire. Thickness: as per YES
(Blankets with acoustic glass tissue
issue facing) project requirement Density: 40kg/m3
produced by combining thermosetting
mosetting resins with
sity 40kg/cu.m.
mineral fibers and with density Mada Rockwool Insulation comply to ASTM
C665, Type I.
DISCLAIMER: WE CERTIFY THAT ALL THE REQUIREMENTS OF THIS SPECIFICATION FOR THE PROPOSED MATERIALS/PRODUCT/EQUIPMENT
ODUCT/EQUIPMENT HAS BEEN COMPARED, AND THE DEVIATIONS FROM THE SPECIFICATION (IF ANY) HAVE BEEN SPECIFICALLY IDENTIFIED AND ARE DEEMED ACCEPTABLE. PERMISSION TO PROCEED SHALL NOT CONSTITUTE ACCEPTANCE
OR APPROVAL OF MATERIALS SELECTED BY CONTRACTOR AND SHALL NOT RELIEVE CONTRACTOR FROM FULL COMPLIANCE TECHNICAL SPECIFICATIONS, AND APPLICABLE LOCAL AUTHORITIES' SPECIFICATIONS.
PLIANCE WITH CONTRACT TEC

Manufacturer / Supplier Name Manufacturer / Supplier Representatives

Representat Signatures & Stamps Contractor Name Contractor Representatives Signatures & Stamps

MADA GYPSUM COMPANY

Classification | Company General Use

 ‫إدارة مختبر دبي المركزي‬
Organization/Unit: :‫الوحدة التنظيمية‬
Dubai Central Laboratory Department
TEST REPORT
Document Title: THERMAL TRANSMISSION PROPERTIES BY :‫عنوان الوثيقة‬
HOTPLATE APPARATUS
Doc. Ref. : DM-DCLD-F-CM-0100 ‫ل‬:‫رقم الوثيقة‬
CONSTRUCTION MATERIAL LABORATORY SECTION
GREEN BUILDING PRODUCT UNIT
Report No: 459063 Request No: EMTX-2022-1026849

Project No: BP-2022-418 Report Date: 04/07/2022 12:00PM

Project Name: TESTING SERVICE FOR M PLUS SYSTEMS CO. L.L.C

Consultant: M PLUS SYSTEMS CO. L.L.C

Contractor: M PLUS SYSTEMS CO. L.L.C

Location: * SITE
Source: * NOT GIVEN
Sample Description: * FIBER CEMENT BOARD
Product Name: * FIBER CEMENT BOARD

Sampling Date/Time: * 17/06/2022 10:16AM Lot/Batch/Coil/Heat No.* NA

Receiving Date/Time: 22/06/2022 08:51AM Lot Size: * -

Sample Size /Quantity: 4 pieces Sender No: FCB-1
Material/Mix Type: * NA Laying Date/Production Date: * NA
Nominal Size / Working Block Size (mm) : 200 X 200 X 12

TEST RESULTS
PARAMETER RESULTS

SUPPORT / FACING* NIL

NOM. THICKNESS (mm)* 12
NOM. DENSITY (kg/m3)* NG
APPARATUS TAURUS HOTPLATE APPARATUS [TLP 800-S]
SIZE OF PLATE (mm) 200
SHAPE OF PLATE SQUARE
ORIENTATION OF PLATE HORIZONTAL
SINGLE OR DOUBLE SIDE OPERATION SINGLE
SECONDARY GUARDING DETAILS EXPANDED POLYSTYRENE
FILL GAS PRESSURE (Pa) N/A.
TYPE OF MATERIAL USED FOR CERTIFIED REFERANCE MATERIAL 1RMM-440
CALIBRATION
DATE OF CERTIFICATION OF CALIBRATION MARCH - 2010
MATERIAL
SOURCE OF CERTIFICATION INSTITUTE OF REFERENCE MATERIALS AND MEASUREMENTS
SPECIMEN DEGREE OF HOMOGENITY OR FIBER CEMENT BOARD
ANISOTROPY
TEMPERATURE, RH & TIME AT WHICH 35 deg C & 60% RH, 48 H
SPECIMEN CONDITIONED
TIME REQUIRED FOR STEADY 16
TEMPERATURE CONDITION

PO Box 67, Dubai, UAE - Tel: (+971 4) 3027216 - Email: [email protected] - Website: http://www.dm.gov.ae
This report shall not be reproduced except in full without approval of the laboratory.
Date of Issue : 02/05/2021 Rev No. : 3
Open Data / ‫بيانات مفتوحة‬ Level of Confidentiality / ‫درجة السرية‬ Page 1 of 3
 ‫إدارة مختبر دبي المركزي‬
Organization/Unit: :‫الوحدة التنظيمية‬
Dubai Central Laboratory Department
TEST REPORT
Document Title: THERMAL TRANSMISSION PROPERTIES BY :‫عنوان الوثيقة‬
HOTPLATE APPARATUS
Doc. Ref. : DM-DCLD-F-CM-0100 ‫ل‬:‫رقم الوثيقة‬
CONSTRUCTION MATERIAL LABORATORY SECTION
GREEN BUILDING PRODUCT UNIT
Report No: 459063 Request No: EMTX-2022-1026849
TIME TO REACH STEADY STATE 01:04:21
DATA ACQUISITION TIME PERIOD 1 Hr.
FREQUENCY OF DATA COLLECTION 1 Min.
END DATE & TIME 02-07-2022 08:04:00 PM
TEST NO / SPECIMEN NO. 1/1
LENGTH BEFORE CONDITIONING (mm) 199.83
WIDTH BEFORE CONDITIONING (mm) 201.00
THICKNESS BEFORE CONDITIONING (mm) 24.38
MASS BEFORE CONDITIONING (kg) 1.1607
LENGTH AFTER CONDITIONING (mm) 199.83
WIDTH AFTER CONDITIONING (mm) 201.00
THICKNESS AFTER CONDITIONING (mm) 24.38
MASS AFTER CONDITIONING (kg) 1.1250
MASS AFTER TEST (kg) 1.1255
MEATERED SECTION AREA (m2) 0.040
DENSITY (MEASURED) (kg/m3) 1148.8
HEATING POWER (W) 6.587
HOT SURFACE TEMPERATURE (deg C) 44.5
COLD SURFACE TEMPERATURE (deg C) 23.8
TEMPERATURE DIFFERENCE ON SAMPLE ( 20.8
K)
SPECIFIED MEAN TEMPERATURE (deg C) 35
THERMAL CONDUCTIVITY AT SPECIFIED 0.20359
MEAN TEMPERATURE (W/m.K)
THERMAL RESISTANCE AT SPECIFIED 0.11978
MEAN TEMPERATURE (m2K/W)

Sampled By: CLIENT REPRESENTATIVE/ VINAYAK Tested By: SSRAJU

Sampled Brought By: CLIENT REPRESENTATIVE/ VINAYAK Testing Date: 22/06/2022 08:51AM
Sampling Method: NOT GIVEN Sampling Report No: NA
Test Method: ASTM C177-19 Test Method Variation: NIL

Remarks: CUSTOMER PERFORMED SAMPLING AND PROVIDED THE SAMPLE; THE RESULTS APPLY ONLY TO THE SAMPLE AS
RECEIVED AND TESTED. - TWO SAMPLES KEPT TOGETHER TO ACHIEVE 25mm THICKNESS

Disclaimer : * Information is supplied by the customer and Laboratory is not responsible for this data.

To verify this document please go to : https://www.dm.gov.ae/#check-tab5

Enter Document ID: EMTX-2022-1026849 and Verification Code: 716037
or Scan the QR code below.

PO Box 67, Dubai, UAE - Tel: (+971 4) 3027216 - Email: [email protected] - Website: http://www.dm.gov.ae
This report shall not be reproduced except in full without approval of the laboratory.
Date of Issue : 02/05/2021 Rev No. : 3
Open Data / ‫بيانات مفتوحة‬ Level of Confidentiality / ‫درجة السرية‬ Page 2 of 3
 ‫إدارة مختبر دبي المركزي‬
Organization/Unit: :‫الوحدة التنظيمية‬
Dubai Central Laboratory Department
TEST REPORT
Document Title: THERMAL TRANSMISSION PROPERTIES BY :‫عنوان الوثيقة‬
HOTPLATE APPARATUS
Doc. Ref. : DM-DCLD-F-CM-0100 ‫ل‬:‫رقم الوثيقة‬
CONSTRUCTION MATERIAL LABORATORY SECTION
GREEN BUILDING PRODUCT UNIT
Report No: 459063 Request No: EMTX-2022-1026849

*** END OF REPORT ***

This report is computer approved and authorized by Head of Unit and does not require any signature .

PO Box 67, Dubai, UAE - Tel: (+971 4) 3027216 - Email: [email protected] - Website: http://www.dm.gov.ae
This report shall not be reproduced except in full without approval of the laboratory.
Date of Issue : 02/05/2021 Rev No. : 3
Open Data / ‫بيانات مفتوحة‬ Level of Confidentiality / ‫درجة السرية‬ Page 3 of 3
 TEST REPORT
REACTION TO FIRE TEST
Test Sponsor:
Mada Gypsum Company
Yanbu Al Sinayah 51 000
P.O. Box 31542
Kingdom of Saudi Arabia
T: +966 14 3253253 ext.1374| F: +966 14 3250420
Website: www.madagypsum.com

Test Material / Assembly:

12 mm thick Fibre cement board
Test Standard:
ASTM E84-20: Standard Test Method for Surface Burning Characteristics of Building
Materials

Test Date: 9-Mar-21

Issue Date: 5-Apr-21
Test Reference No: VB128

PO BOX 26385, DUBAI UAE T +971 (0)4 821 5777 [email protected] www.bell-wright.com

DUBAI ABU DHABI DOHA RIYADH

Copyright© This document shall not be reproduced except in full without written approval of Thomas Bell-Wright International Consultants
 Test Report Ref. No. VB128

Accreditation
Testing
ISO/IEC 17025: General requirements for the competence of testing and calibration
laboratories with:

United Kingdom Accreditation Service (UKAS) - Testing Laboratory: 4439

www.ukas.com

GCC Accreditation Center (GAC) Testing Laboratory: ATL-0017

www.GCC-accreditation.org

Memberships
Members of European Group of Organization for Fire Testing, Inspection and Certification
www.egolf.org.uk
Member of Association for Specialist Fire Protection
www.asfp.org.uk
Member of Centre for Window and Cladding Technology
www.cwct.co.uk

The work which is the subject of this report falls under the accreditations of ISO 17025 UKAS and ISO 17025
GAC.

Page 2 of 10
 Test Report Ref. No. VB128

Table of Contents
INTRODUCTION ....................................................................................................................................... 4
SPONSOR ................................................................................................................................................. 4
TESTING LABORATORY ............................................................................................................................ 4
DATE OF TEST .......................................................................................................................................... 4
SPECIMEN DESCRIPTION ......................................................................................................................... 5
SPECIMEN VERIFICATION ........................................................................................................................ 5
METHOD OF TEST .................................................................................................................................... 5
7.1. Placing of test specimen ................................................................................................................. 5
7.2. Test Method .................................................................................................................................... 5
7.3. Conditioning .................................................................................................................................... 6
OBSERVATION ......................................................................................................................................... 6
SUMMARY OF RESULTS ........................................................................................................................... 6
10. CLASSIFICATIONS .................................................................................................................................... 7
11. LIMITATIONS ........................................................................................................................................... 8
12. APPENDIX 1 GRAPHS ............................................................................................................................ 9
13. APPENDIX 2 PICTURES........................................................................................................................ 10

Page 3 of 10
 Test Report Ref. No. VB128

INTRODUCTION
Determination of the flame spread index and the smoke developed index of 12 mm thick Fibre cement
board as per ASTM E84-20; Standard Test Method for Surface Burning Characteristics of Building
Materials.

SPONSOR
Name: Mada Gypsum Company
Address: Yanbu Al Sinayah 51 000
P.O. Box 31542
Kingdom of Saudi Arabia
T: +966 14 3253253 ext.1374 | F: +966 14 3250420
Website: www.madagypsum.com

TESTING LABORATORY
Name: Thomas Bell-Wright International Consultants (TBWIC)
Address: Corner of 46th and 47th streets, Jebel Ali Industrial Area 1
P.O. Box 26385, Dubai, U.A.E.
T: +971 (0) 4 821 5777
www.bell-wright.com

DATE OF TEST
Sample received date: 3-Mar-21
Test date: 9-Mar-21
The test was not witnessed by the sponsor.

Page 4 of 10
 Test Report Ref. No. VB128

SPECIMEN DESCRIPTION
Note: The testing laboratory does not hold any responsibility for the information that has been provided
by the test sponsor which could not be verified by the testing laboratory, as this could affect the validity
of the test result. All information that could not be verified will be indicated by an asterisk (*) mark.
Product Tested 12 mm thick Fibre cement board* (Stated)
Trade Name Mada Fiber Cement Board* (Stated)
Mada Fiber Cement Board is manufactured to meet the requirements of
ASTM C-1185. Available in standard dimension with smooth texture
Product Description
finishes to meet the requirements of modern buildings for interior
applications* (Stated)
Panels 1-3: 2015 x 600 x 12 mm, Panel 4: 1320 x 600 x 12 mm (l x w x thk)
Dimensions per panel
(Measured by TBIWC)
Quantity of panels 4 Nos.
Total dimension 7365 x 600 x 12 mm (l x w x thk) (Measured by TBIWC)
Area Weight 18 Kg/m²* (Stated)
Density 1300 kg/m3* (Stated)
The 4 panels of 12 mm thick Fibre cement board were butt jointed end-
Specimen placement to-end. The test specimen was placed directly to the tunnel ledges with
the top surface (fire side) towards the flame source.

SPECIMEN VERIFICATION
The choice and design and the definition of the specimen have been made by Mada Gypsum Company,
and TBWIC testing laboratory has not been involved in the selection or design of the specimen. The
results apply to the samples as received.
Note: There are contexts where information has been provided by the sponsor and verification of
information has been done through either technical datasheet or other document submission, or as
indicated directly by the sponsor. For this reason, materials have been tested in an as-received
condition and TBWIC bears no liability for the legitimacy of the submitted information.

METHOD OF TEST
7.1. Placing of test specimen
The test specimen consisted of 4 panels of 12 mm thick Fibre cement board. The dimension for
Panels 1-3: 2015 x 600 x 12 mm, and for Panel 4: 1320 x 600 x 12 mm (l x w x thk) and was butt
jointed end-to-end. The total dimension of the specimen was 7365 x 600 x 12 mm (l x w x thk).
Several sections of cement board butt jointed end-to-end with overall dimensions of 7350 x
600mm (l x w), were placed at the back of the sample to protect the furnace lid assembly.
7.2. Test Method
The specimen was placed in the ceiling position, supported horizontally on the ledges of the Steiner
Tunnel. The top surface (fire side) was exposed face down to the ignition source during the 10-
minute test duration.

Page 5 of 10
 Test Report Ref. No. VB128

Flame Spread and Smoke Density were measured, and the results were compared against standard
calibration materials (fiber-cement board, heptane and red oak flooring).
7.3. Conditioning
After delivery on 3-Mar-21, the specimen was placed in a conditioned space where temperature
and humidity were maintained between 23 ± 2.8°C and 50 ± 5% respectively, until constant weight
was attained.

OBSERVATION
Test Data and Observation

Observations Result
Ignition Time (min:sec) None
Time to maximum flame front advance (min:sec) None
Maximum flame spread (ft) None
Time to end of tunnel reached (min:sec) Not Reached
Maximum temp recorded at the exposed thermocouple located
547/286
near the end of the tunnel ( F / C)
Dripping (min:sec) None
Flaming on the floor (min:sec) None
After flame on the top (min:sec) None
After flame on the floor (min:sec) None
Delamination (min:sec) None
Cracking (min:sec) 3:22
Shrinkage (min:sec) None
Fallout (min:sec) None

FS*Time Area (ft*min) 0.0

Smoke Area (%A*min) 0.9
Heptane Smoke Area (%A*min) 85.6

SUMMARY OF RESULTS
The test specimen has been evaluated in accordance with ASTM E84-20; Standard Test Method for
Surface Burning Characteristics of Building Materials.

The test results are:

FLAME SPREAD INDEX (FSI) 0

SMOKE DEVELOPED INDEX (SDI) 0

Results are valid for the tested configuration only.

Page 6 of 10
 Test Report Ref. No. VB128

CLASSIFICATIONS
The following information is designed to help put these test results into context. Flame Spread Index
and Smoke Developed Index results from an ASTM E84 test are often used by regulatory agencies to
approve materials for various applications. For example, the International Building Code 2018, Section
803.1.2 requires that:

Interior wall and ceiling finish materials shall be classified in accordance with ASTM E84 or UL 723-11th
Ed. 2018. Such interior finish materials shall be grouped in the following classes in accordance with
their flame spread and smoke-developed indexes.

Class A: Flame spread index 0 - 25; smoke-developed index 0 - 450.

Class B: Flame spread index 26 - 75; smoke-developed index 0 - 450.
Class C: Flame spread index 76 - 200; smoke-developed index 0 - 450.

Note that the above example is the IBC requirement for interior wall and ceiling finishes only; the
application of the tested specimen may differ.

Page 7 of 10
 Test Report Ref. No. VB128

LIMITATIONS
Testing of materials that melt, drip, or delaminate to such a degree that the continuity of the flame
front is destroyed, results in low flame spread indices that do not relate directly to indices obtained
by the testing materials that remain in place.

Thomas Bell-Wright International Consultants recommend that the relevance of test reports should
be considered after a period of five years.

This test report is respectfully submitted by: Thomas Bell-Wright International Consultants

Prepared/Tested By: Reviewed By:

_________________________________________ _______________________________
Vibin Mohanan Fredilyn Paragoso
Technical Laboratory Assistant Fire Testing Support Engineer

Approved By:

________________________________
Suketa Tyagi
Reaction to Fire - Manager

Page 8 of 10
 Test Report Ref. No. VB128

APPENDIX 1 GRAPHS

20
18
16
Flame Spread (feet)

14
12
10
8
6
4
2
0
0 1 2 3 4 5 6 7 8 9 10
Time (min)

Red Oak Calibration Test Specimen

Graph 1: Flame Spread Index (FSI)

100
90
80
% Light Absorption

70
60
50
40
30
20
10
0
0 1 2 3 4 5 6 7 8 9 10
Time (min)
Heptane Calibration Test Specimen

Graph 2: Smoke Developed Index (SDI)

Page 9 of 10
 Test Report Ref. No. VB128

APPENDIX 2 PICTURES

Photo 1: Specimen before the test. Photo 2: Specimen before the test.
(Non-Fire Side) (Fire Side)

Photo 3: Specimen after the test. Photo 4: Specimen after the test.
(As seen from the fire-end) (As seen from the exhaust end)

----- End of Test Report -----

Page 10 of 10
 00)
THAILAND INSTITUTE OF SCIENTIFIC AND TECHNOLOGICAL RESEARCH (TISTR)

INDUSTRIAL METROLOGY AND TESTING SERVICE CENTRE, ANALYTICAL CHEMISTRY LABORATORY

TEST REPORT

Request No. : 25-64/0269 MTC.ACL.No. 360/64

Client : BLUE LABEL CO.,LTD. Date of receipt : February 1, 2021

48/58 Moo 1, Ekachai Road, Khok-Krabue, Started date : February 24, 2021

Muang, Samutsakhon, 74000, Thailand. Finished date : March 2, 2021

Condition of testing Temperature (25 + 5) "C, Relative humidity (50 ‡ 20) % Page : 1 of 1

Sample Identification : Cement Jointing Compound (RF-103, RF-136, RF-230, MD-008)

Result

Items Unit Results Method

VOCs Contents LOQ (LOQ = 0.0005)

< LOQ (LOQ = 0.0005)

Trichloroethane (TCE) LOQ (LOQ = 0.0005)

n-Hexane < LOQ (LOQ = 0.0005)

< LOQ (LOQ = 0.0005)

In-house method
o-Xylene < LOQ (LOQ = 0.0005)
TM-503-04 based on
p-Xylene g/g LOQ (LOQ = 0.0005)
ISO 11890-2 2013 (E)
m-Xylene < LOQ (LOQ = 0.0005)

Benzene < LOQ (LOQ = 0.0005)

Toluene < LOQ (LOQ = 0.0005)

< LOQ (LOQ = 0.0005)

Unidentified Compounds LOQ (LOQ = 0.0005)

END OF TEST REPORT

Tested / analysed by Approved by .................... ..

1 ..............1....................... 132 (Mrs. Thippaya Junvee Fortune)

2 .................................... .............. Director of Analytical Chemistry Laboratory
3 Date : March 9, 2021

Ref. 2025264020100420001

The results relate only to the items tested/calibrated or value assigned.

Advertising the Report/Certificate and publicity of the results except in full are prohibited unless written permission is obtained from the governor of TISTR.

FM.BL.MTC.002 Rev.4

Head Office Office/Laboratory Office

35 Mu 3 Tambon Khlone Ha, Amphoe Khlong Luang, Soi 1C, Bangpoo Industrial Estate, Sukhumvit Road, 196 Phahonyothin Road, Chatuchak, Bangkok 10900,
Changwat Pathumthani 12120, Thailand Amphoe Muang, Changwat Samutprakan 10280, Thailand Thailand
Tel. (66) 0 2577 9000 Tel. (66) 0 2323 1672-80 ext. 115, 116 Tel. (66) 0 2579 1121-30 ext. 5219, 5225, 5217
Fax. (66) 0 2577 9009 Fax. (66) 0 2323 9165 Fax. (66) 0 2579 8592
E-mail : [email protected]
 BLUE LABEL CO.,LTD.
48/58 Moo.1 Ekachai Road, Khok-Krabue, Amphur Muang, Samutsakhon, 74000 Thailand
Tel : +66 3449 4774-5 Fax : +66 3449 4776 Website : www.bluelabelgroup.com

LABORATORY TEST REPORT

Date : September 7, 2016

Theme : Check film properties of RHINOZ Cement Plaster Base. Report No. : LTR-160222
Reported by : Phitchaya Approved by : Sombat

Specification & Film properties

RF-103
Checking item Test standard
RHINOZ Cement Plaster Base

1. Base Cement & Acrylic

2. Component 2 part
3. Mixing ratio, by wt. (A:B) 3:1
4. Pull-off adhesion (N/mm2) ASTM D4541 1.0 (a)
5. Bending, 28 days (Ø mm.) ISO 1519
5.1 Film thickness 0.5 mm. 6 mm.
5.2 Film thickness 1 mm. 8 mm.
5.3 Film thickness 2 mm. 16 mm.

Remark : 1. Failure pattern of pull-off adhesion

(a) Failure within tested sample
(b) Tested sample is a stretch, but not torn
(c) Failure between tested sample and substrate
(d) Failure within the substrate
(e) Failure between tested sample and epoxy
(f) Failure between dolly and epoxy

2. Bending test by mandrel tester, order from flexible to stiff

Rod diameter sizes : 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32 mm.

The data shown are based on laboratory tests only. Actual measured data may vary due to circumstances beyond our control
Page 1 of 1
To, Date: 11th Nov, 2022.

Mr Sumayah Hamed
Specification Engineer,
Mada Gypsum Company Ltd. Al-Sinayah, KSA.

Subject: Declaration letter on LATICRETE Joint-O-Fix (254 Platinum)

Greetings,

LATICRETE Middle East LLC hereby confirms that LATICRETE Joint-O-Fix (254 Platinum) are from same family & formulation with a high-
performance multi-purpose polymer fortified cementitious compound with high deformability. Ideally designed as a jointing compound, repairing
cement board joints, and tile/stone fixing adhesive. The ultimate one-step, thin-set mortar designed to just mix with water has a long open time with
unsurpassed adhesion and workability cementitious compound with high deformability.
• That Meets & Exceeds specialized product tested accordance to ASTM D454, Exceeds ANSI A118.4, A118.11 and ANSI A118.15 and
Conforms to EN 12004, ISO 13007 as tile adhesive with a classification of C2TE S1.
• LATICRETE Joint-O-Fix (254 Platinum) - Water Base Adhesives for Specific Application (Cementitious) - VOC (Al Sa’fat DGBS limit is
max. 80 g/l), Dubai Central Laboratory Department (DCLD) of Dubai Municipality hereby attests that the product(s) Low Emitting Materials.

Kindly follow the LATICRETE Method Statement, Technical Datasheet, and Standard Application on Hot Weather Guidelines for ideal installation
and durability. Please feel free to contact the Laticrete Technical team in case of any further assistance or clarifications.

Regards,

Meher Mukherjee,
Head of Technical Services,
LATICRETE Middle East LLC

Letter No #112022002
CC: Shiv
Encl: Dubai Central Laboratory Department (DCLD) of Dubai Municipality – Test Report LATICRETE 254 Platinum.

“As a professional courtesy, LATICRETE International, Inc. (LATICRETE) offers technical services free of charge. LATICRETE does not have any expressed or implied contractual obligation or duty to provide those
technical services. The user maintains all responsibility for verifying the applicability and suitability of the technical service or information provided. Moreover, technical service site visits and consultations by any
LATICRETE representatives do not constitute expressed or implied approval of product use or other construction means or methods. By providing technical services, LATICRETE does not perform any duty owed
by the user to any third party, and no third party should rely on LATICRETE providing technical services.”

Globally Proven Construction Solutions

LATICRETE MIDDLE EAST LLC PO BOX 86028 JAZEERAT AL HAMRA RAS AL KHAIMAH,
UNITED ARAB EMIRATES, TEL.: +971 7 2446396, FAX: +971 7 244 5915;
Email: [email protected], Website: www.laticrete.me
5th June 2023

TO WHOM SO EVER IT MAY CONCERN

This is to hereby confirm that LATICRETE TILE JOINT O FIX is a polymer modified cementitious JOINTING
COMPOUND and the VOC (volatile organic compound) is less than 1.0 g/L.

The above-mentioned product falls in the category of Adhesives and the VOC limit is 65.0 g/L.

Please feel free to contact Laticrete Technical team in case of any further assistance or clarifications.

Thank you and best regards,

Amit Vyas
Manager Specifications/LEED GA
LATICRETE Middle East LLC
Ref: SPA 05230073

CC :Vivek

“As a professional courtesy, LATICRETE International, Inc. (LATICRETE) offers technical services free of charge. LATICRETE does not have any
expressed or implied contractual obligation or duty to provide those technical services. The user maintains all responsibility for verifying the applicability
and suitability of the technical service or information provided. Moreover, technical service site visits and consultations by any LATICRETE representatives
do not constitute expressed or implied approval of product use or other construction means or methods. By providing technical services, LATICRETE
does not perform any duty owed by the user to any third party, and no third party should rely on LATICRETE providing technical services.”

Globally Proven Construction Solutions

LATICRETE MIDDLE EAST LLC PO BOX 86028 JAZEERAT AL HAMRA RAS AL KHAIMAH,
UNITED ARAB EMIRATES, TEL.: +971 7 2446396, FAX: +971 7 244 5915;
Email: [email protected], Website: www.laticrete.me
 CERTIFICATE OF PRODUCT CONFORMITY
Dubai Central Laboratory Department (DCLD) of Dubai Municipality
hereby attests that the product(s)

Low Emitting Materials

(Details as per the attached Scope of Certification)
manufactured by:

LATICRETE MIDDLE EAST LLC

RAK Ceramics Bldg. 3rd Floor Al Jazeera Al Hamra-RAK, UAE
have been assessed in accordance with DCLD Document Ref. No. DM-DCLD-RD-DP21-2001 (IC) "General Rules for DM third party product
certification system through factory assessment" and the relevant Specific Rules, and were found in conformity with the standard specification:

2020 AL SA'FAT DUBAI GREEN BUILDING SYSTEM

Accordingly, DCLD hereby authorizes the above manufacturer
to affix the DCL Product Conformity Mark on the above-mentioned product(s).

for / ENGR. AMIN AHMED AMIN

Director, Dubai Central Laboratory Department
Dubai Municipality

Certificate No: CL20020733 Current Issue Date: 10/03/2022

Valid Until: 09/03/2023 Original Issue Date: 10/03/2020

DM-DCLD-F-IC-2031 Rev 18
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCL PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL20020733

Certificate Issued To LATICRETE MIDDLE EAST LLC

RAK Ceramics Bldg. 3rd Floor Al Jazeera Al Hamra‐RAK, UAE

Applicable Standard Specification: 2020 Al Sa’fat - Dubai Green Building System.

Applicable Specific Rules: DM-DLCD-RD-DP21-2180-(IC) Specific Rules for Low-

Emitting Materials through Factory Assessment as per the

2020 Al Sa’fat Dubai Green Building system.

Product
S/N Brand Name Product Details
Description

9235 WATERPROOFING MEMBRANE Water Base Coatings

9237 WATERPROOFING MEMBRANE for Interior Application

HYDRO BAN (Waterproofing undercoat)

302 WATERPROOF SLURRY VOC (Al Sa’fat DGBS limit is max.140 g/l)

Water Base Coatings

LEVEL PRIMER for interior Application
One-pack
ADMIX & PRIMER (Under layer floor coating)
performance
VOC (Al Sa’fat DGBS limit is max.140 g/l)
1 coatings
(Sub-category 9) Water Base Coatings

STONETECH BULLETPROOF SEALER for Interior Application

(other types)
190 SEALER (Tile & Stone top sealer)

VOC (Al Sa’fat DGBS limit is max.140 g/l)

Solvent Base Coatings

STONETECH IMPREGNATOR PRO SEALER for Interior Application

STONETECH ENHANCER PRO SEALER (Tile & Stone top sealer)

VOC (Al Sa’fat DGBS limit is max.140 g/l)

LATICRETE BASE
Two Pack Reactive
LATICRETE CLEAR
Performance Solvent Base Coatings
LATICRETE FLOW
Coating for Specific for Interior Application
2 LATICRETE GUARD
End Use such as (Floor-Top coating)
LATICERTE PRIMER
Floors VOC (Al Sa’fat DGBS limit is max.140 g/l)
LATICRETE SEALER
(Sub-category 10)
LATICRETE CLEAR PU

Page 1 of 3 DM-DCLC-F-IC-2032 R9
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCL PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL20020733

Water Base Coatings

LEVEL for Interior Application
LATASCREED 100 (Under layer floor coating)
VOC (Al Sa’fat DGBS limit is max.140 g/l)

Water Base Coatings

DRYTEK 9400 for Interior Application
LEVEL DL PLUS (Floor-Top coating)
VOC (Al Sa’fat DGBS limit is max.140 g/l)

Water Base Coatings

for Interior Application
LATAFINISH WALL PUTTY
(Under layer finish before painting)
VOC (Al Sa’fat DGBS limit is max.140 g/l)

305 TILE GLUE

315 TILE ADHESIVE
317 FLOOR AND WALL
325 PREMIUM TILE ADHESIVE
Water Base Adhesives
335 PREMIUM PLUS TILE ADHESIVE
for Specific Application
290 PREMIUM FLOOR & WALL
220 MARBLE AND GRANITE THICK BED (Cementitious Tile & Stone Adhesives)

ADHESIVE VOC (Al Sa’fat DGBS limit is max. 80 g/l)

211 CRETE FILLER POWDER
3 ADHESIVES
211 CRETE FILLER POWDER S2 + 4237
LATEX THIN-SET
SUPERSET
254 PLATINUM / 254 PLATINUM-RAPID
Solvent Base Adhesives
LATAPOXY 300 ADHESIVE
for Specific Application
LATAPOXY 310 STONE ADHESIVE
(Polymer based Tile & Stone Adhesives)
LATALASTIK
VOC (Al Sa’fat DGBS limit is max. 80 g/l)

1500 SANDED GROUT

1600 UN SANDED GROUT Water Base Sealants
PERMACOLOR GROUT for Architectural Applications
4 SEALANTS PERMACOLOR SELECT GROUT
VOC (Al Sa’fat DGBS limit is max. 250 g/l)
1776 GROUT ADMIX PLUS
SPECTRALOCK PRO PREMIUM GROUT
STELLAR GROUT

Page 2 of 3 DM-DCLC-F-IC-2032 R9
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCL PRODUCT CONFORMITY CERTIFICATION SCHEME

SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL20020733
LATAPOXY SP-100 Solvent Base Sealants

LATAPOXY 2000 INDUSTRIAL EPOXY for Architectural Applications

GROUT VOC (Al Sa’fat DGBS limit is max. 250 g/l)

NOTE 1: This document forms part of the Certificate of Product Conformity bearing the same certificate number.
NOTE 2: The above product shall bear the DCL Conformity Mark (applied on each product or on the packaging).

Original Issue Date : 10 MARCH 2020

Current Issue Date : 10 MARCH 2022
Valid Until : 09 MARCH 2023

ARIF HUSAIN AL MARZOOQI

Products Conformity Assessment Section Manager
Dubai Central Laboratory Department

Page 3 of 3 DM-DCLC-F-IC-2032 R9
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
MADA
PROJECTS

-
 *ÀœiVÌ
*Àœi
iVÌ
V ˆ˜} >i`˜ÌiÀ˜>̈œ˜>čˆÀ«œÀÌ ˆÃŽ-V œœ
KSA
A – Ri
Riya
Riyadh
ya
adh KSA – Riyadh KSA – Riyadh

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
Manens - Tifs
Manens
M Tiffs 20
018
2018 202
18 - 2025 AECOM Arabia Ltd. 2019 - 2022 DAR Al Handasah 2022 - 2022

>ˆ˜
>ˆ˜
> ˆ˜ œ˜ÌÀ>V̜À
ˆ˜ œ˜ÌÀ>V ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
AB
ABV Ro
ABV Rock G
R ck Group iˆˆ˜}
iˆˆ˜} RTCC - IC ICTAS JV iˆˆ˜} Saudi Arabian Baytur iˆˆ˜}
1 Mil
Million m2 150,000 m2 Construction 120,000 m2

www.madagypsum.com
www
w.ma
m dag m.com
om
om
 %QORCP[2TQƂNG

-č + *ÕLˆV˜ÛiÃ̓i˜Ì՘`­*®/œÜiÀ č  ˆ˜i“>‡>À>“>

KSA
A – Ri
Riya
Riyadh
yadh
yadh KSA – Riyadh KSA – Majmah

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆ ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
Khatib & Alami
Kh Alaami 20
018
18 - 202
2018 2022 Jones Lang LaSalle 2022 - 2023 Jones Lang LaSalle 2020 - 2020
Incorporated Incorporated

>ˆ˜
> ˆ˜
>ˆ˜ œ˜ÌÀ>V
ˆ˜ œ˜ÌÀ>V̜À ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
U
Unnit
ited
United d Tech gy Fo
Technology For
For iˆˆ˜}
iˆˆ˜} ABSAL PAUL iˆˆ˜} CINE Construction & iˆˆ˜}
Cons
Constuction
n tuctio Co.. 75,00
75,000 - 90,000 m2 Contracting Co. 100,000 m2 Development 10,000 m2

MADA GYPSUM 13
MADA
PROJECTS

č˜`>ÕÈ>œÃ«ˆÌ>‡
`>Õ
ÕÈ>œ
Õ œ œÃ«
à ˆÌ>‡ iÜ>ˆč>“i>
>ˆˆ č>
 “i
>“i>> ÕÀ>˜œÃ«ˆÌ> ->ˆ/œÜiÀ
œÃ«ˆÌ
ˆÌ>
ˆÌ KSA
>KS
>
œÃ«ˆÌ> A - Jeddah
Je
Je KSA - Jeddah KSA - Jeddah

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
KGP Engineer
KG Engineering
e ing
er 20
021
21 - 202
2021 2023 AJ Saudi 2021 - 2023 Al Issa Consulting Co. 2018 - 2022

>ˆ˜
> ˆ˜
>ˆ˜ œ˜ÌÀ>V
ˆ˜ œ˜ÌÀ>V̜À ÞÜ>*
ÀÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Andalusia
A
An
nda
d lusia H
Hospital
al i ˆˆ˜}
iˆˆ˜} Ta'Afuf Company For iˆˆ˜} Al Saad Contracting iˆˆ˜}
Mana
n gem
Management 40,00
40,000 m2 Electrical Works 55,000 m2 Company 140,000 m2

www.madagypsum.com
www
w.ma
m dag m.com
om
om
 %QORCP[2TQƂNG

i``>
`>
> čµÕ
čµÕ>,>vyiÃ
Õ>
>,>vy
vy
yià č`“ˆ˜ˆÃÌÀ>̈Ûi œÕÀÌ*ÀœiVÌi``> -Տˆ“>˜č>LiiLœÃ«ˆÌ>
KSA
A - Jeddah
J dd
Jeddah
ah KSA - Jeddah KSA – Jeddah

œ˜ÃՏÌ>˜Ì
˜ÌÌ / ˆ“i
iˆ ˜i
/ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
Morganti Saudi
Morganti
M Sauudi Arabia
Ara 2019
20
019
19 - 2023
202 Dubai Engineering 2020 - 2023 Sulaiman Al Habib 2021 - 2023
Consultancy Center Engineering

>ˆ˜
> ˆ˜
>ˆ˜ œ˜ÌÀ>V
ˆ˜ œ˜ÌÀ>V̜À ÞÜ>*
ÀÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Al Arrab
Al Arrab i ˆˆ˜}
iˆˆ˜} Saudi Constructions iˆˆ˜} Saudi Aircon Co. iˆˆ˜}
Cont
Contracting
nttractin Co.. Ltd. 90,00
90,000 m2 Development Co. 20,000 m2 120,000 m2

MADA GYPSUM 15
MADA
PROJECTS

/ >Ž
Ž iÀVˆÌÞ
iÀVˆÌÞ
ÌÞ
Þ -č œÃ«ˆÌ>/>ˆv “>“čL`ՏÀ> “>˜ ˆ˜>ˆÃ>1˜ˆÛiÀÈÌÞ
KSA
A - Ma
M
Makkah
kkah
kk ah KSA - Taif KSA – Dammam

œ˜ÃՏÌ>˜Ì˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆ ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
El Kheriji Co. - Khat
Khatib & Alami
Alam
mi 20
019
19 - 202
2019 2024 DAR Al Handasah 2017 - 2021 Zuhair Faiz 2015 - 2017

>ˆ˜
> ˆ˜
>ˆ˜ œ˜ÌÀ>V
ˆ˜ œ˜ÌÀ>V̜À ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Al A
Al riff Cont
Arif g
Contracting iˆˆ˜}
iˆˆ˜} Nesma iˆˆ˜} Azmeel Contracting iˆˆ˜}
Comp
m any
Company 60,00
60,000 m2 500,000 m2 Company 130,000 m2

www.madagypsum.com
www
w.ma
m dag m.com
om
om
 %QORCP[2TQƂNG

À>˜`>Þ>ÌÌœÌi
˜`
` >Þ>
` >ÌÌ
Ì œÌi œˆ`>Þ˜˜œÌi č->>“œÃ«ˆÌ>
KSA
A – Kh
Khob
Khobar
obar
obar KSA – Khobar KSA – Khobar

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
Saud
Sa
a Counsul
Counsult
ult
ul 20
015
15 - 201
2015 2016 OPECO 2018 - 2019 Al Outhman Engineering 2017 - 2019

>ˆ˜
>ˆ˜
> ˆ
ˆ˜ œ˜ÌÀ>V̜À
œ˜ÌÀ>V ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Al Mabbani G
Al Mabani al
General iˆˆ˜}
iˆˆ˜} .G2TGOKGT1HƂEG iˆˆ˜} Al Outhman Construction iˆˆ˜}
Conttracto
Contractors 100,0
100,000 m2 50,000 m2 100,000 m2

MADA GYPSUM 17
MADA
PROJECTS

i“«ˆ˜ÃŽÞœÌi
“«
«ˆ˜
ˆ ÎÞœ
œÌi
œ -č  >ˆ˜ Ո`ˆ˜}EœL> >Ì> čœÕÃ>œÃ«ˆÌ> œÀÌ /œÜiÀ
KSA
A – Kh
Khob
Khobar
obar
obar i˜ÌiÀ‡KSA - Jubail KSA – Al Hassa

œ˜ÃՏÌ>˜Ì
˜ÌÌ /ˆ“iˆ˜i
/ˆ“iiˆ ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
Al Outhman Engineering
Engine 2014
20
014
14 - 2016
201 SABIC 2020 - 2023 Ahmad Al Mousa Engineering 2018 - 2021
& Counsultants

>ˆ˜
>ˆ˜
> ˆ˜
˜ œ˜ÌÀ>V̜À
œ˜ÌÀ>V ÀÞÜ>*>À̈̈œ˜
ÀÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Al
A OOuthman
utthman Construction
stru
uct
ctio
ion
ion iˆˆ˜}
iˆˆ˜} Shapoorji Pallonji LLC iˆˆ˜} Masah Specialized iˆˆ˜}
80,000 m2
80,00 150,000 m2 Construction Co. 150,000 m2

www.madagypsum.com
www
w.ma
m dag m.com
om
om
 %QORCP[2TQƂNG

/,čč­ˆ˜}čL`Տ>âˆâ
,ččč ­ˆ
ˆ˜}
ˆ ˜} čL`
L Տ i˜
i˜ÌiÀœÀ
˜Ìi
ÌiÀ
iÀ œ
œÀ 蓓>` ÕȘiÃÃ*>ÀŽ čà >À/i˜Ìi`,iÜÀÌ
œÀ`
` Õ
7œÀ` ՏÌ
ÌÌÕÀ
ÕÀi® hran
n
i®KSA – Dhahran
i®
ՏÌÕÀi® KSA – Dhahran KSA- Alula

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
ARAMCO
AR 20
018 - 2019
2018 Wood Al Hejailan Consultants 2019 - 2021 HCO 2020 - 2022
*QWUGQH%QPUWNVKPI1HƂEG

>ˆ˜

> ˆ˜ œ˜ÌÀ>V̜À
>ˆ˜
>ˆ˜ œ˜ÌÀ>V
ÌÌÀ> ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Saud
Sa
Saudi Oger
u i Oger i ˆˆ˜}
iˆˆ˜} Al-Kifah Construction iˆˆ˜} DEPA Interiors iˆˆ˜}
10,00
10,000 m2 75,000 m2 15,000 m2

MADA GYPSUM 19
MADA
PROJECTS

iœ“
œ“
“ œ˜ÃÌ
œ˜ÃÌÀÕV̈œ˜6ˆ>}i
ÃÌÌÀÀÕ
ÕV̈œ˜6 i œ>ÃÌ>6ˆ>}i,iÈ`i˜Ìˆ> œ>ÃÌ>6ˆ>}i ‡6ˆ>ÃE/œÜ˜œÕÃiÃ
KSA
A - Ne
N
Neom
om KSA – Umluj KSA – Umluj

œ˜ÃՏÌ>˜Ì
˜ÌÌ /
/ˆ“iˆ˜i
ˆ“i
iˆˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
ECEC (East C
EC Consulting
onsult 20
019
19 - 202
2019 2022 SDT 2020 - 2023 SDT 2020 - 2022
E ngi
ginneering Cent
Engineering Center) (Services Design Technology) (Services Design Technology)

>ˆ˜
>ˆ˜
> ˆ˜ œ˜ÌÀ>V̜À
ˆ˜ œ˜ÌÀ>V ÀÞÜ>*>À̈̈œ˜
ÀÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
Ma
Many
M ny Main acttor
orss
Main Contractors iˆˆ˜}
iˆˆ˜} Many Main Contractors iˆˆ˜} Al Bawani iˆˆ˜}
60,000 m2
60,00 100,000 m2 15,000 m2

www.madagypsum.com
www
w.ma
m dag m.com
om
om
 %QORCP[2TQƂNG

-œÕÌÌ iÀ˜
iÀ˜ ՘
Õ
՘iÃ
ià č7>Ï/œÜiÀ ˆi/œÜiÀ
KSA
A – Umlu
U
Um
Umluj
mlu
luj
uj UAE - Dubai UAE - Dubai

œ˜ÃՏÌ>˜Ì˜ÌÌ /ˆ“iˆ˜i
/ˆ“iiˆ ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i œ˜ÃՏÌ>˜Ì /ˆ“iˆ˜i
SDT
SD D 20
021
21 - 202
2021 2023 UN Studio & Werner Sobek 2021 - 2024 Norr Group Consultants 2020 - 2023
Serrvi
((Service
vicce Design Te ology)
Technology) Engineering Consultant International LTD.

>ˆ˜
>ˆ˜
> ˆ˜ œ˜ÌÀ>V̜À
ˆ˜ œ˜ÌÀ>V ÀÀÞÜ>*>À̈̈œ˜
ÞÜ>* >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜ >ˆ˜ œ˜ÌÀ>V̜À ÀÞÜ>*>À̈̈œ˜
N
Ne
esm
s a Unit
Nesma dusstr
trie
trie
United Industriesiess iˆˆ˜}
iˆˆ˜} Saleh Construction LLC iˆˆ˜} China Railway 18th Bureau iˆˆ˜}
12,00
12,000 m2 275,000 m2 Group Ltd 60,000 m2

MADA GYPSUM 21
 CEMENT BOARD PARTITION

Copyrights Mada Gypsum Company. All Rights Reserved | Saudi Arabia | Tel: (00966) 14 325 3253 | Fax: +966 14 325 0420
WARRANTY
 THE AVENUES, RIYADH CONSULTING ENGINEERS
Plot No: 24, Sector No: SE 45_05, Riyadh, “EHAF”
Kingdom of Saudi Arabia

2. Install three (3) sample expansion anchors in manner proposed for anchorage
chorage and
test each anchor to prove a factor of safety of 8 or more when compared
pared to actual
service load.
3. ed. If one or more
If one or more anchors fail in the first test, the test shall be repeated.
xpansion type anchor
anchors fail the second test, the anchor is rejected and another expansion ancho
shall be tested as above until an anchor is accepted.
B. Advise Consultant three (3) working days in advance of tests and submit ubmit a written report
repo of
k.
the results. Include cost of all the aove mentioned tests in this work.

1.10 EXTRA SPARE FINISHING ITEMS

A. The Contractor shall supply 5% extra spare finishing items ms as for each type of tiles and
ceiling and its accessories used in the Project. The spares and delivered to
s shall be packed an
Employer’s stores as directed by the Engineer for future maintenance or rep
replacement:

PART 2 - PRODUCTS

2.1 ACCEPTABLE FABRICATORS

A. (Refer Separate List of Manufacturers)

2.2 WALL BOARD MATERIALS

A. Provide in maximum lengths and widths
dths available that will
w minimize joints in each area and
correspond with support system indicated.
icated.
B. Gypsum Wallboard: To ASTM C36.
36. BS EN 520;
C. Standard gypsum board.
1. Regular Gypsum Board:
oard: Gypsum core panel solid set core enclosed in paper.
Complying with ÅSTM
TM C1396.
a. Product: as approved by Engineer.
Engin
b. Thickness:
ss: 1/2 inch.
c. Width:
h: 48 or 54 inches.
d. Length:
ngth: Use longest length
le available to avoid joints.
e. Edges: Square unless
unles otherwise indicated on the drawings
2. Fire resistant gypsum board:
bo Gypsum core panel with a specially formulated core for
usee in fire-resistive Typ
Type. Complying with ÅSTM C 1396.
a. Product: as approved
a by Engineer.
b. Thickness: 1/2 inch.
c. Width: 48
4 or 54 inches.
d. Length: Use longest length available to avoid joints.
Lengt
e. Edges:
Edg Tapered unless otherwise indicated on the drawings
3. Moisture
Moistur resistant gypsum board: Gypsum core panel with enhanced core formulated
for resistance
re to moisture and mold; surfaced with moisture/mold resistant paper on
front,
fron back, and long edges. Complying with ASTM C 1396.
a.
a Product: as approved by Engineer.
b. Thickness: 1/2 inch.

REV: 00 GYPSUM BOARD

09 29 00 - Page 4 of 11
 THE AVENUES, RIYADH CONSULTING ENGINEERS
Plot No: 24, Sector No: SE 45_05, Riyadh, “EHAF”
Kingdom of Saudi Arabia

c. Width: 48 or 54 inches.
d. Length: Use longest length available to avoid joints.
e. Edges: Tapered unless otherwise indicated on the drawings
f. able) when tested in
Mold Resistance: Panel score of 10 (highest rating available)
accordance with ÅSTM D 3273.
4. Water-Resistant Gypsum Board: Gypsum core panel with enhancednhanced water resistant
resi
core for use behind tile in wet areas. Complying with ÅSTM C 1396.
a. Product: as approved by Engineer.
b. Thickness: 1/2 inch.
c. Width: 48 or 54 inches.
d. id joints.
Length: Use longest length available to avoid
e. ed on the drawings
Edges: Tapered unless otherwise indicated
5. Acoustic gypsum board: Gypsum core panell with enhanced acoustice
aco core for use in
reamnet requirements.
designated areas to Comply with acoustic treamnet requiremen
D. Cement Board units: ANSI A118.9.

2.3 GYPSUM BOARD CEILING AND SOFFIT PANELS

A. Exterior Soffit Board
1. Moisture and Mold Resistant Gypsum Board, Paperless
Pa Sheathing: Gypsum core
panel with enhanced core formulated
rmulated for resistance
resistan to moisture and mold, complying
with ÅSTM C 1177.
a. Product: as approved
ved by Engineer.
b. Thickness: 1/2 inch.
nch.
c. Width:48 inches.
hes.
d. Length:10 feet.
e. Edges: Square unless otherwise
otherw indicated on the drawings
f. Mold Resistance: Panel score of 10 (highest rating available) when tested in
accordance
ordance with ÅSTM D 3273.
B. Interior Ceiling
g Board
1. Regular
lar Gypsum Ceiling Board: Gypsum Core panel with enhanced sag resistant
e. Complying with ÅSTM
core. ÅS C 1396.
a.. Thickness: 1/2 inch.
b. Width: 48 inches.
in
c. U longest length available to avoid joints.
Length: Use
d. Edges Tapered unless otherwise indicated on the
Edges:
drawi
drawings
2. Gypsum Ceiling Cove and Cornice: Profile molding for installation at wall/ceiling joint.
Comply
Complying with ÅSTM C 1396.
a. Thickness, Profile Width and length as shown on the drawings.

2.4 METAL STUD SYSTEM

A. Components, General: Comply with ASTM C754.
Com

REV: 00 GYPSUM BOARD

09 29 00 - Page 5 of 11
 THE AVENUES, RIYADH CONSULTING ENGINEERS
Plot No: 24, Sector No: SE 45_05, Riyadh, “EHAF”
Kingdom of Saudi Arabia

B. Steel Sheet Components: Comply with ASTM C645 requirements for metal and
d with hot-dip
galvanized zinc coating.
C. Non-Load bearing steel studs with top and bottom tracks 0.9mm (20 gauge)) steel studs shall
be roll formed, and rigid furring channels, conforming to ASTM C645.
D. Furring Channels: ASTM C645, flanges not less than 38mm edge to be bent back 90 9
degrees and doubled to form a 5mm minimum return, faces knurled and webs provided with w
hannels to be fabric
suitable knock-out, pass-through holes. Floor and ceiling runner channels fabricated
from same material as studs.
E. esistance, holding power
Fasteners for Metal Framing: Of type, material, size, corrosion resistance, po and
s.
other properties required to fasten steel members to substrates.
F. Shaftwall Framing Materials.
1. Shaftwall assemblies including studs, channels, runners, struts an
and fasteners as
fir rating and air
required by CW stud types of size indicated, as required by fire
con
resistance, and as approved by the Engineer. Members shall conform to applicable
provisions of ASTM C645, BS EN 520.
2. ments:
Assembly shall meet the following requirements:
3. d to L/240 of the span
Deflection of the shaftwall shall be limited spa in height.
4. Leakage of Air (Shaftwall): Shaftwallll construction shall
shal be airtight and free from
uch requirements shall
whistling and other noise. Meeting such sh be the responsibility of this
Section, whether or not it becomess necessary to use additional
a material and labour to
ditional materials and labour (materials as specified or
accomplish this result. Such additional
S
other proposed materials) shall be included by this Section at no additional cost.

2.5 ACOUSTICAL/FIRE RESISTING SEALANT

A. Nonsag, paintable, nonstaining
g latex sealant com
complying with ASTM C834 that effectively
reduces airborne sound transmission
ransmission through
throug perimeter joints as demonstrated by
representative assemblies according to ASTM EE90.
B. Fire Resistive Sealant: High quality, ready to use, caulking grade, fire resistive silicone
sealants.
C. Steel Screws;
1. Screws for use with furring channels
cha to ASTM C-1002 to be self-tapping type, case
hardened,, with socketed counter-sunk
coun heads as per the specification of the approved
cturer.
manufacturer.
2. w type for steel stud and for gypsum board to gypsum board framing as per the
Screw
cification of the appr
specification approved manufacturer.

2.6 TRIM ACCESSORIES

A. m: Comply with ASTM C 1047.
Trim:
B. Material: Galvanized steel sheet.
1. Cornerbead
Cornerbead: Use at outside corners.
2. LC - Bead:
Bead Use at exposed panel edges.
3. Expan
Expansion (Control) Joint: Provide as indicated.

2.7 AUXILIA
AUXILIARY MATERIALS
A. Gener
General: Provide auxiliary materials that comply with referenced installation standards.

REV: 00 GYPSUM BOARD

09 29 00 - Page 6 of 11
 THE AVENUES, RIYADH CONSULTING ENGINEERS
Plot No: 24, Sector No: SE 45_05, Riyadh, “EHAF”
Kingdom of Saudi Arabia

B. Steel Screws: Screws for use with furring channels to ASTM C-1002 to be self-tapping,
type,case
ha
rdened, with socketed counter-sunk heads.
C. Joint treatment materials: Comply with ASTM C 475.
D. Other Materials.
1. Metal corner beads, casing beads and stops shall be for or drywall application
applicatio of
e length per location where
galvanized sheet metal with perforated flanges, one piece
practical.
2. ed by manufacturer of gypsum
Tape to be 50 mm wide, perforated type, and approved
wallboard products.
3. Jointing compounds to be either case in vinyl or latex, slow setting,
setting bedding and
acturer of gypsum wa
finishing compounds of type approved by manufacturer wallboard products.
Fast setting joint fillers shall not be used.
4. Sound seal gaskets for use between top track and suspendedsuspend ceilings (or other
-adhering sealant ta
surfaces) to be a closed cell vinyl foam self-adhering tape 6mm x 25mm wide.
5. Other materials, not specifically describeded but required for a complete and operable
installation of the work in this Section,, shall be first quality and to approval.
E. Sound Attenuation Blankets (Batt Insulation):tion): To BS 3533
3533:1981 ASTM C-665, Type I
g) produced by com
(blankets with acoustic glass tissue facing) combining thermosetting resins with
m.
mineral fibers and with density 40kg/cu.m.

PART 3 - EXECUTION

3.1 EXAMINATION
A. Prior to commencement ensure that work of other trades is complete to the point where
installation of work underr this Section may pr
properly commence.
B. ins
Verify that gypsum board may be installed in accordance with pertinent codes and
cturers' approved recommendations,and
regulations, manufacturers' rec the original design.
C. o not commence installation
Discrepancies: Do ins of system board until unsatisfactory conditions
cted.
have been corrected.

3.2 S
LOCATIONS
A. Refer to schedules and drawings
dr for locations of fire rated and acoustical assembly
partitions.
ns.

3.3 METAL
TAL STUD INSTALLATION
INSTAL
A. Installation Standards: ASTM C 754, ASTM C 840, BS 2989: 1982 and BS 2994 1976, 1982
nstallation Standard
requirements that apply
a to framing installation.
B. Install runner channels
ch at floor (or top of wall) and ceiling accurately align according to
partition layout
layout.
C. Install steel studs vertically at 600mm to centres or as indicated on drawings and fix studs to
runners by screwing or crimping.
D. Splice sstuds where necessary by nesting and lap a minimum of 200mm, fix with minimum of
one (1
(1) screw per stud flange.

REV: 00 GYPSUM BOARD

09 29 00 - Page 7 of 11
 5 4 3 2 1 Owner:

h
o
m
o
u
l
S
INTERNAL WALL
EXTERNAL WALL TYPES PARTITION GENERAL NOTES ‫ﺷﻣﻭﻝ‬
1. GENERAL
AAC WALL 200MM A. REFER TO ENLARGED PARTIAL PLANS (SCALE 1/100) FOR SCHEDULED PARTITION LOCATIONS AND TYPES.
REFLECTED CEILING
200X200MM REFER TO RCP DRAWINGS B. REFER TO INTERIOR DESIGN DWGS FOR ROOM FINAL FINISHES NOT SHOWN ON PARTITION TYPES. SHOMOUL HOLDING COMPANY W.L.L.

REINFORCED LINTEL C. FIRE RATED PARTITIONS REFER TO LIFE SAFETY DWGS Project Management:
RESERVATION FOR AIR D. ALL DIMENSIONS ARE IN MILLIMETERS, ALL LEVELS ARE IN METERS.
585 SUPPLY ANCHOR PLATE AECOM Arabia Ltd
155 430 BEIGE MUD FINISH_R01 2. FRAMING Riyadh-King Fahad Road
INSULATED METAL PANEL (AS PER AI FINISH MANUAL) A. ISOLATE PARTITION FRAMING FROM STRUCTURAL ELEMENTS TO PREVENT THE TRANSFER OF LOADS TO PARTITION ASSEMBLIES. INSTALL SLIP TRACK ASSEMBLIES 58729 Riyadh, 11414 Saudi Arabia

REINFORCED LINTEL
PER DETAILS.
RAINSCREEN CLADDING SINGLE LAYER B. PROVIDE ADEQUATE SHEET METAL OR STEEL BACKING FOR ALL WALL MOUNTED ARCHITECTURAL WOODWORK, FINISH CARPENTRY, TOILET PARTITIONS AND
GYPSUM BOARD SUPPORTED ON DRY WALL 12.5MM Prime Consultant:
ACCESSORIES AND SIMILAR MOUNTED ITEMS.
WALL TYPES SECTIONS METAL STUDS
METAL STUDS EVERY 300MM
THICK
C. REFER TO MEP AND FIRE PROTECTION DRAWINGS FOR OPENING AND PENETRATION FOR FIRE STOP & PLUMBING REQUIREMENTS FOR FULL HEIGHT PARTITIONS. Al Zaid Engineering
MAIN STEEL STRUCTURE, RESERVATION FOR AIR "C"CHANNELS AL - ZAID ‫ﺍﻟﺰﻳﺪ‬

E
RETURN 100X50X1 MM
Consultants (ZEC)
FOIL FACED STONEWOOL REFER TO STRUCTURAL

C
Z
3. FIRE RATED PARTITIONS ENGINEERING P.O. Box 20179 Riyadh 11455, KSA
10 100 150 100 20 THERMAL INSULATION, 125MM DRAWINGS @600MM CONSULTANTS ‫ﻟﻺﺳﺗﺷﺎﺭﺍﺕ ﺍﻟﻬﻧﺩﺳﻳﺔ‬
Riyadh, KSA
150 THICK A. FIRE RATED PARTITIONS ARE TO BE CONSTRUCTED BEFORE NON-FIRE RATED PARTITIONS.
PLASTER + FINISH AS ANCHOR PLATE Lead Consultant:
125 B. ALL FIRE-RESISTANCE RATED PARTITIONS SHALL BE CONSTRUCTED FROM TOP OF NON FINISHED FLOOR CONSTRUCTION TO BOTTOM OF FLOOR CONSTRUCTION
D PER ABOVE. D SHAREKAT ALMOHANEDSOON
FINISHING SCHEDULE 50MM X 100MM X ALISTESHAREYOON WE SHARIKOH

/ INTERIOR

EXTERIOR
C. ALL PARTITIONS NOTED TO BE FIRE RATED SHALL BE CONSTRUCTED IN STRICT ACCORDANCE WITH THE REFERENCED FIRE RESISTANCE TEST. IF NO TEST IN

EXTERIOR
REINFORCED CONCRETE MAIN 3MM STEEL TUBE LEISTESHARAT ALHANDASEYA
STRUCTURE, REFER TO WHERE REFERENCED, PROVIDE AN INDUSTRY RECOGNIZED FIRE-RESISTANCE TEST WITH LETTER OF ENGINEERING JUDGEMENT FOR REVIEW PRIOR TO CONSTRUCTION. C O N S U L T I N G E N G I N E E R S Euro Marché center
RAINSCREEN CLADDING STRUCTURAL DRAWINGS REFLECTED CEILING PLAN REQUIRED King Abdulla road & Osman Ibn Afan road junction
D. ALL THROUGH PENETRATIONS IN FIRE RATED PARTITIONS SHALL BE SEALED WITH MATERIALS AND ASSEMBLIES NECESSARY TO MAINTAIN THE REQUIRED FIRE- Riyadh, Saudi arabia
BY TENANT
100 MM THICK SOLID RATING DURATION OF THE SYSTEM.
FOIL FACED STONEWOOL
CONCRETE MASONRY
THERMAL INSULATION,
E. PENETRATIONS FOR CABLES, CABLE TRAYS, CONDUIT PIPES, TUBES, COMBUSTION VENTS AND EXHAUST VENTS, WIRES, SIMILAR ITEMS TO ACCOMMODATE Construction Supervision:
UNIT ELECTRICAL, MECHANICAL, PLUMBING AND COMMUNICATION SYSTEMS THAT PASS THROUGH THE FIRE BARRIERS ARE PROTECTED BY FIRE-STOP SYSTEMS TESTED IN
125 125MM THICK
H=3500 ACCORDANCE WITH ASTM E 814, STANDARD TEST METHOD FOR FIRE TESTS OF THROUGH-PENETRATION FIRE STOPS OR UL 1479, STANDARD FOR SAFETY FOR FIRE
"C"CHANNELS TESTS OF THROUGH PENETRATION FIRE STOPS.
150 MM ROCK-WOOL
THERMAL INSULATION
100X50X1 MM F. NON METALLIC AND NON PRESSURIZED PIPES THAT EXCEED 40 MM IN DIAMETER ARE PROVIDED WITH FIRE STOP JACKETS (COLLARS) ON BOTH SIDES OF THE
W 09 (REFER TO DETAIL) METAL STUDS EVERY 300MM INSULATED METAL PANEL @300MM WITH BARRIER.
FOIL FACED STONEWOOL RAINSCREEN CLADDING MAXIMUM SPAN G. ALTERNATIVE FOR FIRE-STOPPING: ALTERNATIVELY CONCRETE, GROUT OR MORTAR USED TO FILL THE ANNULAR SPACES AROUND CAST IRON, COPPER OR STEEL
INSIDE OUTSIDE THERMAL INSULATION, 125MM 3500MM
MAIN STEEL STRUCTURE, REFER PIPING, OR STEEL CONDUIT OR TUBING THAT PENETRATES FIRE BARRIER WHERE THE NOMINAL DIAMETER OF EACH PENETRATING ITEM DOES NOT EXCEED 150 MM Main Contractor:
THICK TO STRUCTURAL DRAWINGS DOUBLE LAYER OF
AND THE OPENING SIZE DOES NOT EXCEED 92,909 SQ. MM. THE ASSEMBLY. Nesma ‫ﻧﺳﻣﺎ‬ Nesma & Partners
.

REINFORCED CONCRETE MAIN WALL TYPE 02 DRYWALL 12.5MM

Contracting Co. Ltd
.

STRUCTURE, REFER TO EXTERIOR EACH UPTO 2M FROM THICKNESS OF CONCRETE, GROUT OR MORTAR IS THE FULL THICKNESS OF THE
STRUCTURAL DRAWINGS F.F.L H. ELECTRICAL BOXES: RECESSED STEEL ELECTRICAL BOXES SHALL BE INSTALLED IN FIRE RESISTANT WALLS ON OPPOSITE SIDES OF THE WALL AND SEPARATED BY A & Partners ‫ﻭﺷﺭﻛﺎﻫﻡ‬ PO Box 1498 Al Khobar, 31952
Saudi Arabia
FOIL FACED STONEWOOL HORIZONTAL DISTANCE OF NOT LESS THAT 610 MM.
Contractor Consultant:

430
THERMAL INSULATION,

585
125MM THICK 4. SOUND RESISTANCE RATING Dar al Handasah (Shair
VERTICAL SECTION A. ALL PARTITIONS NOTED TO BE SOUND RESISTANCE RATED, SHALL BE CONSTRUCTED IN STRICT ACCORDANCE WITH THE REFERENCED TEST LISTED FSTC RATINGS
WALL TYPES PLANS W 09 (REFER TO DETAIL)
& Partners)
King Fahd Rd., Olaya, Al-

155
"C"CHANNELS WITH NO REFERENCED TEST ASSEMBLY ARE ESTIMATED RATINGS. Mass Centre
50MM X100MM X 3MM
100X50X1 MM @300MM WITH B. ALL THROUGH PENETRATIONS IN SOUND RESISTANCE RATED PARTITIONS SHALL BE SEALED WITH ACOUSTICAL SEALANT TO MAINTAIN REFERENCED SOUND P.O. Box: 612, Riyadh 11421
125

STEEL TUBE(WHERE
MAXIMUM SPAN 3500MM .
.

REQUIRED)
RESISTANCE RATING.

150
20

OUTSIDE C. ALL THROUGH PENETRATIONS IN ALL PARTITIONS NOTED TO BE SOUND RESISTANCE RATED AND FIRE RESISTANCE RATED ARE REQUIRED TO BE SEALED WITH
MATERIALS CAPABLE OF MEETING BOTH SOUND AND FIRE RESISTANCE RATINGS.
10 100 150 100

EXTERIOR

125
Notes/Legends:
/ INTERIOR D. PROVIDE ACOUSTICAL PADS AROUND ANY ITEMS PENETRATING FACE OF WALL, SUCH AS JUNCTION BOXES, OUTLETS, SWITCHES, ETC. INSTALL ACOUSTICAL 'PUTTY
GYPSUM BOARD SUPPORTED ON PADS' BEHIND & AROUND EACH J-BOX AND MAINTAIN A MINIMUM OF 610 MM O/C WHERE BACK/BACK LAYOUTS MAY OCCUR WHERE OUTLETS NEED TO BE RELOCATED,
300 NOTIFY ARCHITECT IMMEDIATELY.
METAL STUDS
INSIDE E. PROVIDE ACOUSTICAL SEALANT ALL AROUND THROUGH FLOOR PIPE/ DUCT PENETRATION.

W18 - SOLID CMU INS-02-INSULATION CMU WALL INS-01 - INSULATION RC WALL W15- METAL WALL RAINSCREEN CLADDING DRY WALL
5. PLASTERING
A. PLASTERING IS A MUST FOR MASONRY WALLS, TO MAINTAIN THE DESIRED STC RATING; HOWEVER, PLASTERING IS NOT NECESSARY FOR CONCRETE WALLS.
18 17 16 15
.

MUD FINISH C - CHANNEL

B. PLASTERING MIXES FOR WALLS TO BE PLASTERED SHALL BE IN STRICT ACCORDANCE WITH ASTM 926.
.
.

1 : 20 1 : 20 1 : 20 1 : 20 HORIZONTAL SECTION
C. PLASTER TO BE 15 MM THICK FOR INTERNAL WALLS AND 20 MM THICK FOR EXTERNAL WALLS ASTMC 926.
W14 / DRY WALL + STEEL STRUCTURE D. THE GENERAL NOTES SHALL BE READ IN CONJUNCTION WITH THE TECHNICAL SPECIFICATIONS AND DRAWINGS.

15MM INTERIOR PLASTER

GYPSUM BOARD SUPPORTED ON
METAL STUDS
14 1 : 20
20MM PLASTER & PAINT 6. CODES AND STANDARDS
HOLLOW CMU WALL, 200MM THICK
METAL STUDS EVERY 300MM FINISH ON BACK EXTERIOR A. FOR LIST OF ALL CODES AND STANDARDS. REFER TO THE ARCHITECTURE BASIS OF DESIGN REPORT (SHO001-NAP-GN-RP-AR-0001-01-01)
FACE
FOIL FACED STONEWOOL
LIQUID APPLIED WATERPROOFING THERMAL INSULATION, 125MM HOLLOW CMU WALL, 200MM
THICK
WALLS SCHEDULE
MEMBRANE THICK
HOLLOW CMU, 200MM THICK
C RAINSCREEN SYSTEM LIQUID APPLIED WALL C
530
370 THICKNESS MATERIAL AREA OF USE
315 20MM PLASTER & PAINT FINISH
535
WATERPROOFING MEMBRANE CODE
125
150
200
20 Any liquid applied waterproofing membrane 20 200 315
15 200 required behind plaster? W01 200MM REINFORCED CONCRETE WALL VERTICAL CIRCULATION (V.C.)
HORIZONTAL REINFORCED CONCRETE W02 200MM BLOCK WALL AUTOCLAVED SREATED CONCRETE (AAC) F.O.H
STIFFENER (REFER TO DETAIL _ 14 /
HORIZONTAL REINFORCED CONCRETE STIFFENER SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00)
HORIZONTAL REINFORCED CONCRETE W03 200MM SOLID CMU - INTERNAL PARTITION BOH - SHAFTS - WET AREAS
(REFER TO DETAIL _ 14/ STIFFENER (REFER TO DETAIL _ 14/
SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00) SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00) 20MM PLASTER & W04 100MM SOLID CMU - INTERNAL PARTITION V.C. SHAFTS
INTERIOR

PAINT FINISH
EXTERIOR
EXTERIOR

EXTERIOR

EXTERIOR
INTERIOR

HOLLOW CMU
WALL, 200MM W05 130MM GYPSUM BOARD PARTITION - DRY APPLICATION ESCALATOR PITS
THICK PRECAST REINFORCED
15 200 20
CONCRETE PANEL, PAINTED W06 350MM CEMENT BOARD + STEEL SUB STRUCTURE + INSULATION CINEMA AREA
ON SITE TO MATCH
HORIZONTAL REINFORCED CONCRETE 200 ADJACENT FACADE
STIFFENER(REFER THE DETAIL _ 14/ W07 270MM 100 mm SOLID CMU + 70 mm THERMAL INSULATION + 100mm SOLID CMU PARKING FLOORS + DCP AREA
SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00)
VERTICAL REINFORCED CONCRETE W08 450MM CEMENT BOARD + STEEL SUB STRUCTURE + INSULATION CINEMA AREA

EXTERIOR
EXTERIOR
STIFFENER (REFER TO DETAIL _ 14 FROM

EXTERIOR
INTERIOR
SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00) GYPSUM BOARD SUPPORTED ON METAL STUDS
METAL STUDS EVERY 300MM W09 530MM 200MM HOLLOW CMU,PLASTERED AND PAINTED FROM INSIDE(15MM),+LIQUID APPLIED MEMBRANE BUILDING FACADES
15MM INTERIOR PLASTER
FOIL FACED STONEWOOL THERMAL 20MM PLASTER & PAINT FINISH ON ON EXTERIOR FACE COVERED BY RAIN SCREEN Contractor ( Nesma & Partners):
HOLLOW CMU WALL, 200MM THICK
INSULATION, 125MM THICK INTERIOR
BACK EXTERIOR FACE
INS-02 (REFER DETAIL 17) 200MM HOLLOW CMU, PLASTERED AND PAINTED FROM OUTSIDE(20MM), WITH 125MM INTERNAL CHECKED BY:
HOLLOW CMU WALL, 200MM THICK W10 370MM BUILDING FACADES
STONE WOOL THERMAL INSULATION STAGGERED IN 2 LAYER(50MM+75MM) AND GYPSUM BOARD
15

150

INTERIOR 20 APPROVED BY:

EXTERIOR VERTICAL REINFORCED LINING ATTACHED TO METAL STUDS EVERY 300MM.
CONCRETE STIFFENER EXTERIOR
200
125

20

15
200

INTERIOR
W11 535MM 200MM HOLLOW CMU, PLASTERED AND PAINTED FROM BACK EXTEROIR FACE(20MM), +LIQUID BUILDING FACADES RFI REF:

200
530

APPLIED MEMBRANE ON FRONT EXTERIOR - COVERED BY RAIN SCREEN.

535

EXTERIOR VERTICAL REINFORCED CONCRETE STIFFENER

315

200
315

(REFER TO DETAIL _ 14 / General Key Plan:

SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-04-00)
EXTERIOR W12 200MM 200MM HOLLOW CMU, PLASTERED(20MM) AND PAINTED ON BOTH EXTERIOR SIDE BUILDING FACADES NORTH

20MM PLASTER & PAINT FINISH EXTERIOR PRECAST REINFORCED CONCRETE MECCA

20
EXTERIOR RAINSCREEN SYSTEM
HOLLOW CMU, 200MM THICK EXTERIOR VERTICAL REINFORCED CONCRETE STIFFENER 20MM PLASTER & PAINT FINISH
PANEL, PAINTED ON SITE TO MATCH W13 200MM 200MM PRE-CAST REINFORCED CONCRETE PANEL, PAINTED ON SITE TO MATCH ADJACENT FACADE BUILDING FACADES
LIQUID APPLIED WATER PROOFING ADJACENT FACADE
MEMBRANE W10-DRYWALL RENDERED CMU WITH INTERIOR LIQUID APPLIED WATERPROOFING MEMBRANE HOLLOW CMU WALL, 200MM THICK
W09-RAINSCREEN SYSTEM ON CMU WALL THERMAL INSULATION AND DRYWALL LINING W12 - CMU WALL W13- PRECAST R.C. WALL W14 VARIOUS (100X50X3) MM ' C' CHANNEL + (50MMX100X3)MM STEEL FRAME STRUCTURE + CEMENT BOARD BUILDING FACADES(SOUK
09 W11- CLADDING ON CMU WALL 12 13 FRONT)
1 : 20 10 1 :20 11 1 : 20 1 : 20
MALL

1 : 20 W15 VARIOUS SANDWICH PANE MADE OF INSULATED METAL CORE SYSTEM SUPPORTED ON SECONDARY STEEL BUILDING FACADES
STRUCTURE - COVERED BY RAIN SCREEN FROM THE FRONT SIDE.

125MM INTERNAL STONE WOOL THERMAL INSULATION STAGGERED IN 2 LAYERS (50MM+75MM) AND BUILDING FACADES
INS-01 125MM GYPSYM BOARD LINING ATTACHED TO METAL STUDS EVERY 300MM, COVERING MAIN CONCRETE
B INTERNAL WALL TYPES STRUCTURE. B Project Name:

INS-02 125MM 125MM EXTERNAL STONE WOOL THERMAL INSULATION STAGGERED IN TWO LAYERS (50MM+75MM) BUILDING FACADES
15 100 70 100 20
Avenue Mall Riyadh
130
200
W18 350MM 150MM ROCK-WOOL THERMAL INSULATION + 100MM THICK SOLID CONCRETE AT BOTH END. TECHNICAL ROOMS - ROOF
PLASTER + FINISH AS PER SOUND ATTENUATION 200mm THICK SOLID
200
FINISHING SCHEDULE CONCRETE
150 BATTS WHERE 2 LAYER OF MASONRY UNIT
200mm THICK
INDICATED 15mm (EACH) BLOCK WALL W19 62.5MM 50MM STONE WOOL THERMAL INSULATION + 12.5MM CEMENT BOARD (CB) STAIRCASE
SOLID BLOCKS GYPSUM BOARD (AERATED) Project Number SHO001
AS PER PLANS FINISH AS PER AT BOTH SIDE.
SUSPENDED
SUSPENDED SCHEDULE CEILING AS
SUSPENDED CEILING W20 150MM SOLID CMU - INTERNAL PARTITION SOUK ROOM
CEILING AS AS REQUIRED
REQUIRED INSIDE INSIDE
REQUIRED INSIDE
INSULATED DEMOUNTABLE PANEL + STEEL SHEET BOH SHAFTS (PARKING) 100% Detailed Design
OUTSIDE

150MM THICK THERMAL INSULATION CONTINUOUS SUSPENDED

CEILING AS
W21 175MM
SOLID CONCRETE AS PER THE MANUFACTURER BOTTOM TRACK
MASONRY UNIT REQUIRED FINISH AS
INSIDE
FINISH AS INSIDE PER
METAL STUDS FINISH AS PER
PER
SCHEDULE SECTION @100mm O.C. SCHEDULE SCHEDULE
MAY 2023
INSIDE INSIDE
100mm THICK SOLID INSIDE INSIDE
175 SECTION CONCRETE MASONRY UNIT
SECTION

LINTEL SCHEDULE
METAL STUDS @100mm & 2 LAYERs
MASONRY UNIT
150mm THICK SOLID CONCRETE OF 15mm GYPSUM BOARD EACH SIDE
50 BARS T 10 a 200 50 BARS
FINISH AS PER SCHEDULE
FOR ALL SILL AND LINTELS
200

200
DIA. DIA.
BETWEEN COLUMNS AND NOT
130
150

INSULATED METAL PANEL WITH SUPPORTED BY A WALL, PROVIDE

50 BARS
200mm THICK SOLID
STEEL SHEET 1MM AT BOTH FIXES. DOWELS IN THE COLUMN OF SAME

DIA.
CONCRETE MASONRY UNIT 200mm THICK BLOCK WALL
PLAN
PLAN PLAN (AERATED) AND NUMBER AS THE
W20-150MM SOLID CMU W07-270mm SOLID CMU W05-130mm G.B. PARTITION W03-200MM SOLID CMU W02-200MM B.W(AAC) REINFORCEMENT OF THE LINTEL OR
FIRE RATING AS SPECIFIED IN FLS 20 1 : 10
7 1 : 10
5 1 : 10
3 1 : 10
2 1 : 10 SILL. THESE DOWELS SHALL
T 10 a 200 TOP REINFORCEMENT 00 12-05-2023 APPROVED ISSUE J.H
EXTEND 50 BAR DIA. FROM THE Rev Date Description Appr
350
50 VARIOUS 15
450 CEMENT BOARD
FACE OF THE COLUMN.
12.5 MM THICK Issue:
CEMENT BOARD HORIZONTAL STEEL

d
TUBE 80x80x3MM PROJECTION OF FILE NAME : SHO001-NAP-DD2-TD-XX-ZZ-DR-AR-5001-03-00
MINERAL CORE CEMENT BOARD VERTICAL STEEL
EVERY 2000MM

SUSPENDED CEILING
MODEL NAME : SHO001-NAP-XXX-TD-XX-XX-M2D-AR-0001-00-00
BRACING AT
EVERY 2000MM

55 mm STONE WOOL WHEN APPLICABLE TUBE 80x80x3MM

BRACING AT

THERMAL INSULATION PROJECTION OF HORIZONTAL STEEL SCALE: As indicated

VERTICAL BOTTOM REINFORCEMENT
TUBE 80x80x3MM SHEET FORMAT: A0
STEEL TUBE
200 CLEAR SPAN 200
80x80x3MM DRAWN BY: M.O./ K.M.
FINISH AS
PER
MIN. MIN.
OUTSIDE INSIDE DESIGN BY: M.O.
SCHEDULE
CHECKED BY: F.H.
SCHEDULE OF LINTELS REINFORCEMENT (MASONRY WALLS) APPROVED BY:
A INSULATED METAL PANEL WITH STEEL SUSPENDED CELING A J.H.
VARIABLE THICKNESS - AS REQUIRED LINTEL WIDTH
SHEET 1MM AT BOTH FIXES. SECTION
100
100mm THICK
REFER STRUCTURAL
DRAWINGS 15mm PLASTER SECTION SOLID CONCRETE =b b=10cm. b=15cm. b=20cm to 25cm b=25cm to 30cm
SECTION
AND PAINT
CEMENT BOARD
CEMENT BOARD MASONRY UNIT DEPTH=
MINERAL CORE
PROJECTION OF VERTICAL STEEL PROJECTION OF
VERTICAL STEEL
SUSPENDED TOP BOTTOM TOP BOTTOM TOP BOTTOM TOP BOTTOM d
HORIZONTAL STEEL 80 TUBE 80x80x3MM HORIZONTAL STEEL INSIDE INSIDE CEILING AS
CLEAR SPAN REINF. REINF. REINF. REINF. REINF. REINF. REINF. REINF. Sheet Title
VARIABLE THICKNESS - TUBE 80x80x3MM TUBE 80x80x3MM REQUIRED
REFER STRUCTURAL 55 mm STONE WOOL TUBE 80x80x3MM 80 FINISH AS VARIABLE THICKNESS
175

THERMAL INSULATION
DRAWINGS PER -REFER TO STRUCTURAL < 200 1T10 1T14 2T10 2T12 2T10 2T12 3T10 3T12 20
20mm PLASTER AND
PAINT
12.5 MM THICK
CEMENT BOARD
SCHEDULE DRAWINGS MISCELLANEOUS DETAILS-WALL
INSIDE
200-300 1T10 1T16 2T10 2T14 2T10 2T16 3T10 3T16 25 TYPES & WALL DETAILS - 01
15

450

350

301-400 1T10 1T20 2T10 2T16 2T10 2T20 3T10 3T20 30

W21-175MM DEMOUNTABLE PANEL
300

21 1 : 10 401-500 1T10 1T20 2T10 2T16 2T10 2T20 3T10 3T20 40

100mm THICK SOLID CONCRETE Sheet No.
MASONRY UNIT VARIABLE THICKNESS
PLAN -REFER TO STRUCTURAL 501-600 1T10 1T20 2T10 2T16 2T10 2T20 3T10 3T20 50 Design Plot /
50

Project Originator Module Level Type Discipline Number Partial No. REV
Phase Zone
DRAWINGS
PLAN OUTSIDE PLAN W06- 350mm THICKNESS W04-100MM SOLID CMU W01-200MM RC WALL 601-700 1T10 1T20 2T10 2T16 2T10 2T20 3T10 3T20 55
W19 - 62.5MM WALL INS.(CB) W08-450MM WALL (CB) 6 4 SHO001 NAP DD2 TD XX ZZ DR AR 5001 03 00
19 8 1 : 10 1 : 10 1 1 : 10
5 1 : 10 1 : 10 4 3 2 1

E
LEED V4 Questionnaire –
Attached (Stamp).
Intertek does hereby certify that an independent assessment has been conducted on behalf of

MADA GYPSUM COMPANY

Certificate Number: CA-71325-2021d
Certification valid until: 05 October 2022

Applicant Address: PO Box 31542

Yanbu Al Sinayah 51000, Kingdom of Saudi Arabia

Product Category: Building Products

Product Details: See Appendix

Conformance Criteria: California Department of Public Health (CDPH) Standard Method v1.2: Private Office and School Classroom.

Issuing Office Name & Address: Intertek Testing Services NA, Inc.
4700 Broadmoor Ave SE, Suite 200
Kentwood, MI 49512 USA
Ph: +1-616-656-7401

Jesse Ondersma
Certification Officer
06 October 2021

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes
no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate. Any
use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are
relevant only to the sample tested/inspected. This Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Testing Services NA, Inc. SFT-CLEAN AIR-OP-19e (29 September-2020)

1 of 2
 Certificate Appendix

MADA GYPSUM COMPANY

Certificate Number: CA-71325-2021d

Product Category Hardware, Steel

Model Name(s) Mada Metal Profile

Product
None
Restrictions
TVOC Range* 0.5 mg/m3 or less
*TVOC range stated is based on the most stringent modeling scenario as listed in the Conformance Criteria on page 1.

This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes
no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate. Any
use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Certificate are
relevant only to the sample tested/inspected. This Certificate by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Testing Services NA, Inc. SFT-CLEAN AIR-OP-19e (29 September-2020)

2 of 2
 >sϰ^ƵƐƚĂŝŶĂďůĞDĂƚĞƌŝĂůƐYƵĞƐƚŝŽŶŶĂŝƌĞ
dŚĞǀĞŶƵĞDĂůů
WƌŽĚƵĐƚEĂŵĞͬDŽĚĞů͗ EĂŵĞŽĨDĂŶƵĨĂĐƚƵƌĞƌ͗DĂĚĂ'LJƉƐƵŵŽŵƉĂŶLJ
WƌŽĚƵĐƚĞƐĐƌŝƉƚŝŽŶ͗ EĂŵĞŽĨƐƵƉƉůŝĞƌ͗DĂĚĂ'LJƉƐƵŵŽŵƉĂŶLJ

EĂŵĞͬdŝƚůĞŽĨWĞƌƐŽŶŝŶĐŽŶƚĂĐƚ ^z:,ͬ^W/&/d/KEE'/EZ ŵĂŝů͗dĞĐŚŶŝĐĂůΛŵĂĚĂŐLJƉƐƵŵ͘ĐŽŵ dĞů͗ϬϱϯϮϲϯϰϭϵϰ

DĂƚĞƌŝĂůƐĐŽƉĞ͗ŝǀŝůͬDWͬƌĐŚ ĂƚĞ͗ϵͬϰͬϮϬϮϯ ^ƵďŵŝƚƚĂůEƵŵďĞƌ͗
>ŽĐĂƚŝŽŶŽĨƵƐĂŐĞ͗WůĞĂƐĞŚŝŐŚůŝŐŚƚƚŚĞĂƉƉůŝĐĂďůĞ͗΀/ŶĚŽŽƌͬKƵƚĚŽŽƌ΁
dŚŝƐ^DYĨŽƌŵĂƚǁĂƐWƌĞƉĂƌĞĚďLJsŝũŝƐŚWƵŶĂƚŚŝů;>WͿ
ĂƚĂƚŽďĞĨŝůůĞĚďLJ
η >ƌĞĚŝƚƐ ĂƚĞŐŽƌLJ DĂƚĞƌŝĂůƐͬƋƵŝƉŵĞŶƚƐ ^ƵƉƉŽƌƚŝŶŐŽĐƵŵĞŶƚƐZĞƋƵŝƌĞĚ Eͬ
ŵĂŶƵĨĂĐƚƵƌĞƌͬ^ƵƉƉůŝĞƌ
/ĨǁŝƚŚŝŶϭϲϬŬŵŽƌǁŝƚŚŝŶ'DĞŶƚŝŽŶĚŝƐƚĂŶĐĞƐĂƐďĞůŽǁ͗
ǁŝƚŚŝŶϭϲϬŬŵŝƐƚĂŶĐĞƚŽƐŝƚĞ
džƚƌĂĐƚŝŽŶŝƐƚĂŶĐĞƚŽƐŝƚĞ͗;ŬŵͿ
;ŽƵŶƚƌLJŽĨKƌŝŐŝŶĞƌƚŝĨŝĐĂƚĞĂƚƚĂĐŚĞĚͿ
;ŽƵŶƚƌLJŽĨKƌŝŐŝŶĞƌƚŝĨŝĐĂƚĞͿ
ůůDĂƚĞƌŝĂůƐdžĐĞƉƚDW DĂŶƵĨĂĐƚƵƌŝŶŐŝƐƚĂŶĐĞƚŽƐŝƚĞ͗;ŬŵͿ
;ZĞŐŝŽŶĂůĐŽŶƚĞŶƚͿ ϴϲϬŬŵĨƌŽŵDĂŶƵĨĂĐƚƵƌŝŶŐŝƐƚĂŶĐĞƚŽƐŝƚĞ
;>ĞƚƚĞƌŽĨŽŶĨŝƌŵĂƚŝŽŶĨŽƌZĞŐŝŽŶĂůͿ
WĞƌĐĞŶƚĂŐĞŽĨŵĂƚĞƌŝĂůĐŽŵƉůLJŝŶŐďLJǁĞŝŐŚƚ͗;йͿ
DZƌĞĚŝƚƵŝůĚŝŶŐWƌŽĚƵĐƚĞĐůĂƌĂƚŝŽŶĂŶĚ
ϭ ƌĐŚͬ>ĂŶĚƐĐĂƉĞͬDWͬŝǀŝů
KƉƚŝŵŝnjĂƚŝŽŶ DĂŶƵĨĂĐƚƵƌĞĚŽƵŶƚƌLJ͗
<^
;DĂƉĨƌŽŵdžƚƌĂĐƚŝŽŶĂŶĚDĂŶƵĨĂĐƚƵƌŝŶŐůŽĐĂƚŝŽŶƚŽƚŚĞƉƌŽũĞĐƚͿ

WŽƐƚͲĐŽŶƐƵŵĞƌĐŽŶƚĞŶƚ;йͿ
Ϯ͘ϱϬй
ůůDĂƚĞƌŝĂůƐdžĐĞƉƚDW ;ĂƚĂƐŚĞĞƚͬƚĞƐƚĐĞƌƚŝĨŝĐĂƚĞĨƌŽŵŵĂŶƵĨĂĐƚƵƌĞƌͿ
;ZĞĐLJĐůĞĚĐŽŶƚĞŶƚͿ WƌĞŽŶƐƵŵĞƌŽŶƚĞŶƚ;йͿ
ϰ͘ϱϬй
ƚĐĞƌƚŝĨŝĐ
;ĂƚĂƐŚĞĞƚͬƚĞƐƚĐĞƌƚŝĨŝĐĂƚĞĨƌŽŵŵĂŶƵĨĂĐƚƵƌĞƌͿ
ŐŐƌĞŐĂƚĞƐ /ƐŝƚƌĞĐLJĐůĞĚĂŐŐƌĞŐĂƚĞ͍
ĂŐŐƌĞŐĂƚĞ͍ zĞƐ

tŚŝĐŚŽĨƚŚĞďĞůŽǁůŝƐƚĞĚůŝĨĞͲĐLJĐůĞŝŶĨŽƌŵĂƚŝŽŶ;ĚŝƐĐůŽƐƵƌĞĐƌŝƚĞƌŝĂͿ
ĨƚŚĞďĞůŽǁůŝƐƚĞĚůŝĨĞͲĐLJĐůĞŝŶĨŽ
ŝƐĂǀĂŝůĂďůĞĨŽƌƚŚĞŵĂƚĞƌĂŝů͍
ůĂďůĞĨŽƌƚŚĞŵĂƚĞƌĂŝů͍
ĂͿWƌŽĚƵĐƚͲƐƉĞĐŝĨŝĐ>
ƌŽĚƵĐƚͲƐƉĞĐŝĨŝĐ>
WĐĞƌƚŝĨŝĐĂƚĞƐĂƚƚĂĐŚĞĚ͘
ďͿ/ŶĚƵƐƚƌLJͲǁŝĚĞͬŐĞŶĞƌŝĐW
/ŶĚƵƐƚƌLJͲǁŝĚĞͬŐĞŶĞƌŝĐW
DZƌĞĚŝƚƵŝůĚŝŶŐWƌŽĚƵĐƚĞĐůĂƌĂƚŝŽŶĂŶĚ ĐͿWƌŽĚƵĐƚͲƐƉĞĐŝĨŝĐdLJƉĞ////ŶƚĞƌŶĂůW
ĐͿWƌŽĚƵĐƚͲƐƉĞĐŝĨŝĐdLJƉĞ////ŶƚĞ
ϴ ƌĐŚͬŝǀŝů ůůDĂƚĞƌŝĂůƐ ĚͿWƌŽĚƵĐƚ^ƉĞĐŝĨŝĐdLJƉĞ///džƚĞƌŶĂůW
ĚͿWƌŽĚƵĐƚ^ƉĞĐŝĨŝĐdLJƉĞ/// dž
KƉƚŝŵŝnjĂƚŝŽŶ

tŚŝĐŚŽĨƚŚĞďĞůŽǁůŝƐƚĞ
tŚŝĐŚŽĨƚŚĞďĞůŽǁůŝƐƚĞĚƌĞĚƵĐƚŝŽŶƉůĂŶͬŝŵƉĂĐƚƌĞĚƵĐƚŝŽŶƌĞƉŽƌƚ
ŝƐĂǀĂŝůĂďůĞĨŽƌƚŚĞ ŵĂ
ŝƐĂǀĂŝůĂďůĞĨŽƌƚŚĞŵĂƚĞƌŝĂů͍
Ͳ Eͬ
ĂͿ>ŝŵƉĂĐƚƌĞĚƵĐ
ĂͿ>ŝŵƉĂĐƚƌĞĚƵĐƚŝŽŶĐƚŝŽŶWůĂŶ
ďͿϯƌĚƉĂƌƚLJǀĞƌŝĨŝĞĚŝŵƉĂĐƚƌĞĚƵĐƚŝŽŶŝŶ'tW
ďͿϯƌĚƉĂƌƚLJǀĞƌŝĨŝĞ

ϭ͘tŚŝĐŚŽĨƚŚ
ϭ͘tŚŝĐŚŽĨƚŚĞďĞůŽǁůŝƐƚĞĚŽŵƉůŝĂŶƚƌĞƉŽƌƚŝƐĂǀĂŝůĂďůĞĨŽƌ
ǀĞƌŝĨŝĐĂƚŝŽŶŽĨĐŚĞŵŝĐĂůŝŶǀĞƚŽƌLJ;ŵĂƚĞƌŝĂůŝŶĐƌĞĚŝĞŶƚͿ͗
ǀĞƌŝĨŝĐĂƚŝŽŶ
ĂͿƌĂĚůĞƚŽƌĂĚůĞĞƌƚŝĨŝĐĂƚĞ
ĂͿƌĂĚůĞ
ďͿ,ĞĂůƚŚWƌŽĚƵĐƚĞĐůĂƌĂƚŝŽŶ
ďͿ,ĞĂůƚ
ƚƚĂĐŚĞĚ,WĐĞƌƚŝĨŝĐĂƚĞƐ͘
ĐͿ>ŝǀŝŶŐWƌŽĚƵĐƚŚĂůůĞŶŐĞ
ĐͿ>ŝǀŝ
ĚͿDĂŶƵĨĂĐƚƵƌĞƌ/ŶǀĞŶƚŽƌLJ;^ZEͬEƵŵďĞƌͿ
ĚͿD
ĞͿĞĐůĂƌĞ
Ğ
ĨͿE^/ͬ/&D
DZƌĞĚŝƚƵŝůĚŝŶŐWƌŽĚƵĐƚĞĐůĂƌĂƚŝŽŶĂŶĚ
ϵ ƌĐŚͬŝǀŝů ůůDĂƚĞƌŝĂůƐ
KƉƚŝŵŝnjĂƚŝŽŶ Ϯ͘tŚĞƚŚĞƌƚŚĞƌĞƉŽƌƚŝƐϯƌĚƉĂƌƚLJǀĞƌŝĨŝĞĚ͍;zĞƐͬEŽͿ zĞƐ

ϯ͘tŚŝĐŚŽĨƚŚĞďĞůŽǁůŝƐƚĞĚĐŽŵƉůŝĂŶƚŵĂƚĞƌŝĂůŝŶŐƌĞĚŝĞŶƚƌĞƉŽƌƚŽƌ
ĂĐƚŝŽŶƉůĂŶŝƐĂǀĂŝůĂďůĞ͍
ĂͿDĂƚĞƌŝĂů/ŶŐƌĞĚŝĞŶƚ^ĐƌĞĞŶŝŶŐĂŶĚKƉƚŝŵŝnjĂƚŝŽŶĐƚŝŽŶWůĂŶ
ůĞĂŶŝƌ'ŽůĚĐĞƌƚŝĨŝĐĂƚĞĂƚƚĂĐŚĞĚ͘
ďͿĚǀĂŶĐĞĚ/ŶǀĞŶƚŽƌLJΘƐƐĞƐƐŵĞŶƚ
ĐͿZ,KƉƚŝŵŝnjĂƚŝŽŶ
ĚͿ'ůŽďĂůŐƌĞĞŶdĂŐ

ŶƚƌLJǁĂLJƐLJƐƚĞŵƐ͗ƐĐĂůĞĚĨůŽŽƌƉůĂŶƐƐŚŽǁŝŶŐůŽĐĂƚŝŽŶƐĂŶĚ
ŶƚƌLJǁĂLJ^LJƐƚĞŵ
ŶƚƌLJǁĂ Ͳ Eͬ
ŵĞĂƐƵƌĞŵĞŶƚƐ͘
/ŶƚĞƌŝŽƌĐƌŽƐƐͲĐŽŶƚĂŵŝŶĂƚŝŽŶƉƌĞǀĞŶƚŝŽŶ͗ůŝƐƚŽĨƌŽŽŵƐ͕ĂƌĞĂƐ͕
/ŶƚĞƌŝŽƌĐƌŽƐƐͲĐ
/ŶƚĞƌŝŽƌĐƌŽƐƐͲĐŽŶƚĂŵŝŶĂƚŝŽŶƉƌĞǀĞŶƚŝŽŶ Ͳ Eͬ
ĞdžŚĂƵƐƚƌĂƚĞ͕ƐĞƉĂƌĂƚŝŽŶŵĞƚŚŽĚ͘

ƌĐŚͬDW
DW &ŝůƚƌĂƚŝŽŶ͗ĂƚĂƐŚĞĞƚŚŝŐŚůŝŐŚƚŝŶŐDZsŽƌĐůĂƐƐƌĂƚŝŶŐƐĨŽƌĂůůƵŶŝƚƐ
ϭϬ /YƌĞĚŝƚŶŚĂŶĐĞĚ/ŶĚŽŽƌŝƌYƵĂůŝƚLJ^ƚƌĂƚĞŐŝĞƐ &,hDZsĨŝůƚĞƌ Ͳ Eͬ
ƚŚĂƚƐƵƉƉůLJŽƵƚĚŽŽƌĂŝƌ;DZsϭϯͬůĂƐƐ&ϳƚŽďĞƵƐĞĚͿ

ĂƌďŽŶĚŝŽdžŝĚĞŵŽŶŝƚŽƌŝŶŐ͗dĞĐŚŶŝĐĂůĚĂƚĂƐŚĞĞƚĂŶĚůŝƐƚŽĨ
KϮ ĚĞŶƐĞůLJŽĐĐƵƉŝĞĚƐƉĂĐĞƐ͕ƐƉĂĐĞƚLJƉĞ͕ĚĞƐŝŐŶKϮĐŽŶĐĞŶƚƌĂƚŝŽŶƐ͕ Ͳ Eͬ
ĨůŽŽƌƉůĂŶƐŚŽǁŝŶŐƐĞŶƐŽƌůŽĐĂƚŝŽŶƐ͕KϮƐĞƚƉŽŝŶƚƐ͘

WƌŽĚƵĐƚsKŽŶƚĞŶƚ;ŐͬůͿ ƚƚĂĐŚĞĚsKŽŶƚĞŶƚĐĞƌƚŝĨĐĂƚĞĨŽƌ^ĞĂůĂŶƚ͘

sKĐĂƚĞŐŽƌLJ;ĂƐƉĞƌ>ƐƚĂŶĚĂƌĚƐͿ
Ͳ Ͳ
ZĞĨĞƌ^ŚĞĞƚϬϰ
DĂdžŝŵƵŵsKĂůůŽǁĞĚ;ŐͬůͿ;ĂƐƉĞƌ>^ƚĂŶĚĂƌĚͿ;EŽŶĞĞĚƚŽĨŝůů
/YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲĚŚĞƐŝǀĞƐΘ Ͳ Ͳ
ϭϭ ƌĐŚͬDW ĚŚĞƐŝǀĞƐΘ^ĞĂůĂŶƚƐ ƚŚŝƐƐĞĐƚŝŽŶͿ
^ĞĂůĂŶƚƐ sŽůƵŵĞ;>Ϳ Ͳ Ͳ
ƌĞĂ;^Ƌ͘ĨƚͿ Ͳ Ͳ
ƉƌŽŽĨŽĨĐŽŵƉůŝĂŶĐĞ͗dĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsK
ŵŝƐƐŝŽŶ;dĞƐƚDĞƚŚŽĚ͗ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ ƚƚĂĐŚĞĚsKŵŝƐƐŝŽŶĐĞƌƚŝĨŝĐĂƚĞĨŽƌƐĞĂůĂŶƚ
;W,ͿŽƌƋƵŝǀĂůĞŶƚ
WƌŽĚƵĐƚsKŽŶƚĞŶƚ;ŐͬůͿ Ͳ Eͬ
sKĐĂƚĞŐŽƌLJ;ĂƐƉĞƌ>ƐƚĂŶĚĂƌĚƐͿ
Ͳ Eͬ
ZĞĨĞƌ^ŚĞĞƚϬϱ
DĂdžŝŵƵŵsKĂůůŽǁĞĚ;ŐͬůͿ;ĂƐƉĞƌ>^ƚĂŶĚĂƌĚͿ
Ͳ Eͬ
;EŽŶĞĞĚƚŽĨŝůůƚŚŝƐƐĞĐƚŝŽŶͿ

ϭϮ /YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲWĂŝŶƚƐΘŽĂƚŝŶŐƐ
ƚŝŶŐDĂƚĞƌŝĂůƐͲWĂŝŶƚƐΘŽĂƚŝŶ ƌĐŚͬDW WĂŝŶƚƐΘŽĂƚŝŶŐƐ /ƐŝƚtĂƚĞƌďĂƐĞĚŽƌƐŽůǀĞŶƚďĂƐĞĚ͍ Ͳ Eͬ
sŽůƵŵĞ;>Ϳ Ͳ Eͬ
ƌĞĂ;^Ƌ͘ĨƚͿ Ͳ Eͬ

dĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsKŵŝƐƐŝŽŶ;dĞƐƚDĞƚŚŽĚ͗
Ͳ Eͬ
ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ;W,ͿŽƌƋƵŝǀĂůĞŶƚ

&ůŽŽƌŝŶŐ^LJƐƚĞŵdLJƉĞ͗ Ͳ Eͬ
DŽĚĞůEĂŵĞ͗ Ͳ Eͬ

ůĂƐƐŝĨŝĐĂƚŝŽŶͮ/ŶƚĞƌŶĂů
 ͻ&ůŽŽƌ^ĐŽƌĞĐĞƌƚŝĨŝĐĂƚĞ;ŽƌͿ
ͻZ/'ƌĞĞŶ>ĂďĞůWůƵƐWƌŽŐƌĂŵ;ŽƌͿ
ϭϯ /YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲ&ůŽŽƌŝŶŐ^LJƐƚĞŵƐ ƌĐŚ ĂƌƉĞƚƐͬ,ĂƌĚĨůŽŽƌŝŶŐ ͻ'ƌĞĞŶŐƵĂƌĚ/YĞƌƚŝĨŝĐĂƚĞĨŽƌůŽǁĞŵŝƚƚŝŶŐƉƌŽĚƵĐƚƐ
Ͳ Eͬ
ͻdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsKŵŝƐƐŝŽŶ;dĞƐƚDĞƚŚŽĚ͗
ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ;W,ͿŽƌƋƵŝǀĂůĞŶƚ

ƌĞĂ;^Ƌ͘ĨƚͿ Ͳ Eͬ
tĂůůWĂŶĞůdLJƉĞ͗
DŽĚĞůEĂŵĞ͗
ƌĞĂ;^Ƌ͘ĨƚͿ
ϭϰ /YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲtĂůůWĂŶĞůƐ ƌĐŚ tĂůůWĂŶĞůƐ
WƌŽǀŝĚĞdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsKŵŝƐƐŝŽŶ;dĞƐƚ
DĞƚŚŽĚ͗ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ;W,ͿŽƌ
ƋƵŝǀĂůĞŶƚ
ĞŝůŝŶŐ^LJƐƚĞŵdLJƉĞ͗
DŽĚĞůEĂŵĞ͗
ƌĞĂ;^Ƌ͘ĨƚͿ
ϭϱ /YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲĞŝůŝŶŐƐ ƌĐŚ ĞŝůŝŶŐƐ
WƌŽǀŝĚĞdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsKŵŝƐƐŝŽŶ;dĞƐƚ
DĞƚŚŽĚ͗ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ;W,ͿŽƌ
ƋƵŝǀĂůĞŶƚ
/ŶƐƵůĂƚŝŽŶdLJƉĞ͗
DŽĚĞůEĂŵĞ͗
ƌĞĂ;^Ƌ͘ĨƚͿ
ϭϲ /YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲ/ŶƐƵůĂƚŝŽŶ ƌĐŚͬDW /ŶƐƵůĂƚŝŽŶ
WƌŽǀŝĚĞdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚZĞƉŽƌƚĨŽƌsKŵŝƐƐŝŽŶ;dĞƐƚ
DĞƚŚŽĚ͗ĂůŝĨŽƌŶŝĂĞƉĂƌƚŵĞŶƚŽĨWƵďůŝĐ,ĞĂůƚŚ;W,ͿŽƌ
ƋƵŝǀĂůĞŶƚ
ƉƉůŝĐĂƚŝŽŶƚLJƉĞͬůŽĐĂƚŝŽŶ Ͳ Eͬ
ƌĞĂ;^Ƌ͘ĨƚͿ Ͳ Eͬ

WƌŽǀŝĚĞdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚƌĞƉŽƌƚŚŝŐŚůŝŐŚƚŝŶŐĐŽŵƉŽŶĞŶƚƐ
/YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲŽŵƉŽƐŝƚĞtŽŽĚ
ϭϳ ƌĐŚ ŽŵƉŽƐŝƚĞtŽŽĚΘŐƌŝĨŝďĞƌ ;EŽĚĚĞĚ&ŽƌŵĂůĚĞŚLJĚĞͬhůƚƌĂ>ŽǁŵŝƚƚŝŶŐ&ŽƌŵĂůĚĞŚLJĚĞͿ
ΘŐƌŝĨŝďĞƌ
;dĞƐƚDĞƚŚŽĚ͗ ĂůŝĨŽƌŶŝĂŝƌZĞƐŽƵƌĐĞƐŽĂƌĚ;ZͿϵϯϭϮϬ Ͳ Eͬ
ŝƌďŽƌŶĞdŽdžŝĐŽŶƚƌŽůDĞĂƐƵƌĞ;dDͿŽƌEϳϭϳͲϭ͗ϮϬϭϰůĂƐƐϭ
^ƚĂŶĚĂƌĚdĞƐƚDĞƚŚŽĚ

ƉƉůŝĐĂƚŝŽŶƚLJƉĞͬůŽĐĂƚŝŽŶ Ͳ Eͬ

ϭϳ WƌŽǀŝĚĞdĞƐƚĞƌƚŝĨŝĐĂƚĞŽƌdĞƐƚƌĞƉŽƌƚŚŝŐŚůŝŐŚƚŝŶŐĐŽŵƉŽŶĞŶƚƐ
/YƌĞĚŝƚ>ŽǁͲŵŝƚƚŝŶŐDĂƚĞƌŝĂůƐͲ&ƵƌŶŝƚƵƌĞ ƌĐŚ &ƵƌŶŝƚƵƌĞ
;sKŵŝƐƐŝŽŶͿ;dĞƐƚDĞƚŚŽĚ͗E^/ͬ/&DDϳ͘ϭʹϮϬϭϭΘ Ͳ Eͬ
^ƚĂŶĚĂƌĚdĞƐƚDĞƚŚŽĚ
ƚ

dŚĞŝŶĨŽƌŵĂƚŝŽŶƉƌŽǀŝĚĞĚĂďŽǀĞŝƐĐŽƌƌĞĐƚƚŽŵLJŬŶŽǁůĞĚŐĞ͘

ŽŶĨŝƌŵĞĚͲDĂŶƵĨĂĐƚƵƌĞƌ
WƌŝŶƚEĂŵĞ͗ͺͺͺͺͺͺD'zW^hDKDWEzͺͺͺͺͺͺͺͺ

  
^ŝŐŶĂƚƵƌĞ͗ͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺ
ͺͺͺͺͺ
ͺͺͺͺͺ
ͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺ
ͺ ͺ

ϬϮϯ
ĂƚĞ͗ͺͺͺͺͺͺϰͬϵͬϮϬϮϯ

ͺͺͺͺͺͺͺͺ
ͺͺͺͺͺͺ
ͺͺͺͺ
ͺͺͺͺ
ͺͺͺͺ
DĂŶƵĨĂĐƚƵƌĞƌƐƚĂŵƉͺͺͺͺͺͺͺͺͺͺͺͺ

ZĞǀŝĞǁĞĚͲ^ƵƐƚĂŝŶĂďŝůŝƚLJdĞĂŵ
ŝƚLJdĞĂŵ
d

WƌŝŶƚEĂŵĞ͗ͺͺͺVijish Pͺ

^ŝŐŶĂƚƵƌĞ͗ͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺ

ĂƚĞ͗ͺͺͺͺ19-09-23ͺͺͺͺ

ŽŵŵĞŶƚƐ͗

ůĂƐƐŝĨŝĐĂƚŝŽŶͮ/ŶƚĞƌŶĂů
ZĞĨ͗D'ͬdͬϬϭϰͬϮϯ WĂŐĞϭͬϮ

dŽǁŚŽŵƐŽĞǀĞƌŝƚŵĂLJĐŽŶĐĞƌŶ

tĞŚĞƌĞďLJĐŽŶĨŝƌŵƚŚĂƚDĂĚĂ'LJƉƐƵŵŽŵƉĂŶLJŚĂƐŵĂŶƵĨĂĐƚƵƌŝŶŐĨĂĐŝůŝƚLJĨŽƌŐLJƉƐƵŵƉůĂƐƚĞƌďŽĂƌĚƐĂŶĚDĂĚĂ
ƌŐLJƉƐƵŵƉůĂƐƚĞƌďŽĂƌĚ
:ŽŝŶƚŝŶŐĐŽŵƉŽƵŶĚ͕WůĂƐƚĞƌƐΘZĞŶĚĞƌƐ͘
DĂĚĂŬĞĞƉƐŵŽƐƚŽĨŝƚ ƉƌŽĚƵĐƚƐ͕ƐƉĞĐŝĂůŵĞƚĂůƉƌŽĨŝůĞƐĂŶĚĂĐĐĞƐƐŽƌŝĞƐŝŶƐƚŽĐŬƐŽĂƌĞŽƵƌƉĂƌƚŶĞƌƐ͘dŚĞƚĂďůĞ
ƐƚŽĐŬƐŽĂƌĞŽƵƌƉĂƌƚŶĞ
ďĞůŽǁǁŝůůŐŝǀĞƚŚĞĐŽƵŶƚƌLJŽĨŽƌŝŐŝŶĨŽƌƚŚĞƚLJƉĞŽĨƉƌŽĚƵĐƚƐƚŚĂƚǁŝůůďĞƐƵƉƉůŝĞĚƚŽƚŚŝƐƉƌŽũĞĐƚĂůŽŶŐǁŝƚŚƚŚĞ
ƐƵƉƉůŝĞĚƚŽƚŚŝƐƉƌŽũĞĐ
ĐŽͲďƌĂŶĚŝŶŐƵŶĚĞƌǁŚŝĐŚƚŚĞƐĞŝƚĞŵƐǁŝůůďĞŵĂŶƵĨĂĐƚƵƌĞĚ͘

SL. Country of Branding

Product Type Product Description
No Origin Name

ZĞŐƵůĂƌ WůĂƐƚĞƌďŽĂƌĚ͕
ďŽĂƌĚ͕ &ŝƌĞ ZĂƚĞĚ Ɖů ƉůĂƐƚĞƌďŽĂƌĚ͕
DŽŝƐƚƵƌĞ ZĞƐŝƐƚĂŶƚ
ĞƐŝƐƚĂŶƚ WůĂƐƚĞƌďŽĂƌ
WůĂƐƚĞƌďŽĂƌĚƐ͕ &ŝƌĞ Θ
DĂĚĂ 'LJƉƐƵŵ
ϭ 'LJƉƐƵŵ WůĂƐƚĞƌďŽĂƌĚƐ DŽŝƐƚƵƌĞ ZĞƐŝƐƚĂŶƚ ƉůĂƐƚĞƌďŽĂƌĚ͕
ƉůĂƐƚĞƌď /ŵƉĂĐƚ <^
ŽŵƉĂŶLJ
ZĞƐŝƐƚĂŶƚ ƉůĂƐƚĞƌďŽĂƌĚ͕ ĐŽƵƐƚŝĐ
ĐŽƵƐƚ WůĂƐƚĞƌďŽĂƌĚ͕
WƌŽĐĞŵŵ ĞŵĞŶƚ ďŽĂƌĚ Θ ^ŚĂ^ŚĂĨƚ ǁĂůů ƉůĂƐƚĞƌďŽĂƌĚ

DĂĚĂƌLJǁĂůů/ŶƚĞƌŶĂů Ͳ^ƚƵĚƐ͕ tĂůů dƌĂĐŬ͕ ĞĨůĞĐƚŝŽŶ

 ,ĞĂĚ dƌĂĐŬ &ŝdžŝŶŐ DĂĚĂDĞƚĂů
Ϯ <^
WĂƌƚŝƚŝŽŶƐLJƐƚĞŵƐ ŚĂŶŶĞů͕ DĞƚĂů ^ƚƌĂ
^ƚƌĂƉ͕ tĂůů ĂŶŐůĞ͘ WƌŽĨŝůĞƐ

,Ͳ^ƚƵĚƐ͕:ʹ ZƵŶŶĞƌƚƌĂĐŬΘĞĨůĞĐƚŝŽŶ:ͲZƵŶŶĞƌ DĂĚĂ WůƵƐ

ϯ DĂĚĂ^ŚĂĨƚǁĂůůWĂƌƚŝƚŝŽŶƐ
ŝƚŝŽŶƐ h
ƚƌĂĐŬ͕Ͳ^ƚƵĚ
ƚƌĂĐŬ͕Ͳ^ƚƵ DĞƚĂůWƌŽĨŝůĞƐ

ϰ ŶĐŚŽƌƐ dƌƵďŽůƚ ŶĐŚŽƌ Θ tĞĚŐĞ ŶĐŚŽƌ

dƌƵďŽ <^ DĂƐĚĂƌ ͬ^Ɖŝƚ

DĂĚĂ
ϱ ƌĂĐŬĞƚƐƐ > ƌĂĐŬĞƚ Θ ^ůŽƚƚĞĚ ǁĞď > ƌĂĐŬĞƚ <^
ŽŵƉĂŶLJ
ZĞĨ͗D'ͬdͬϬϯϴͬϮϬ
ĂƚĞ͗:ƵŶĞϮϵ͕ϮϬϮϬ

Country of
SL. No Product Type Product Description Branding
Bra Name
Origin

^ĞůĨ dĂƉƉŝŶŐ ^ĐƌĞǁƐ͕

^ĞůĨ ƌŝůůŝŶŐ ^ĐƌĞǁ͕ hͬ
ϲ ^ĐƌĞǁƐ DĂĚĂ ^ĐƌĞǁ
,Ğdž ,ĞĂĚ ^ĐƌĞǁƐ͕ tĂĨĞƌ ,ĞĂĚ ^ĐƌĞǁƐ͕ DĂůĂLJƐŝĂ
>ĂŵŝŶĂƚŝŽŐ ^ĐƌĞǁƐ

ŽƌŶĞƌ ĞĂĚƐ͕ ^ŚĂĚŽǁ ůŝŶĞ ƐƚŽƉƉŝŶŐƉƉŝŶŐ ŶŐůĞ͕

ϳ &ŝŶŝƐŚŝŶŐ WƌŽĨŝůĞƐ h
h DĂĚĂ WƌŽĨŝůĞƐ
^ƚŽƉƉŝŶŐ ŶŐůĞ͕ ĂƐŝŶŐ ĞĂĚ͕ ƚĐĐ

:ŽŝŶƚŝŶŐ ƉƌŽĚƵĐƚƐ DĂĚĂ DƵůƚŝƵƐĞ

ϴ :ŽŝŶƚŝŶŐ ĐŽŵƉŽƵŶĚ <^
:ŽŝŶƚŝŶŐ ŽŵƉŽƵŶŐ

DĂĚĂͲĨŝĐŽ /ŶƐƵůĂƚŝŽŶ
&ŝďĞƌ'ůĂƐƐ tŽŽů /ŶƐƵůĂƚŝŽŶ
ƐƵůĂƚŝŽŶ <^ DĂĚĂͲ<ŝŵŵĐŽ
/ŶƐƵůĂƚŝŽŶ
ϵ /ŶƐƵůĂƚŝŽŶ DĂĚĂͲ^ĂƵĚŝ
ZŽĐŬǁŽŽů /ŶƐƵůĂƚŝŽŶ
ZŽĐŬǁŽŽů /ŶƐƵůĂƚŝŽŶ
ƐƵůĂƚŝŽŶ <^
DĂĚĂͲ^ŝŝŵĐŽ
/ŶƐƵůĂŝƚŽŶ
DĂĚĂ &ŝƌĞ 'ƵĂƌĚ
ϭϬ ^ĞĂůĂŶƚ DĂĚĂ &ŝƌĞ ŐƵĂƌĚ ĐƌLJůŝĐ ƐĞĂ
ƐĞĂůĂŶƚ h
^ĞĂůĂŶƚ

ZĞŐĂƌĚƐ͕

ďĚƵůZĂŚĞĞŵ^ƵůƚĂŶ
Ŷ
΀^LJƐƚĞŵ^ĂůĞƐΘdĞĐŚŶŝĐĂůDĂŶĂŐĞƌ΁
ŶŝĐĂůDĂŶĂŐĞƌ΁
MGC-TD-LD-005-22
Date: 08th NOV. 2022

Subject: Recycled & Regional Material Contents of Construction

nstruction M
Materials
aterials

Recycled Content Regional Ma

Material
M teria Content

Material Manufacturer 1Pre- 2Post- Extraction/harvesting

traccti
tion
on/h
on/h
on /har
/har
arvest
stin
sti g
in Manufacturing distance
Name Consumer Consumer distance
tance (of
(of
of ra
raw
aw materials)
matte
ma terials) from site
Content (%) Content (%) from
fro m site
om
o site
Location
Locaattiio
on
n Miles
Mile Location Miles
The
The Gy
Th Gypsum
Gypspsum
ps u rocks which Mada Gypsum Company’s
contributes
co
ont
ntri
ribu
ri
ibu tess tto
ute o almost
almo 90% by plasterboard manufacturing
weight ht in tthee ma
in th manufacture of plant is located in light
Mada Mada Gypsum the plasterboard
plasterboa is sourced industrial area, Yanbu Al
4.5 2.5
5
Plasterboard Company ffrom
fr o mines within the 200
rom Sinaiyah, Yanbu, KSA which
mile
m ile radius
ra from the is more than 200 miles from
manufacturing facility
manu the project site.

1 Pre Consumer Content –Also referred as Post Industrialial Content,

Contnten
nt en
nt, is defined
defi
fiine
ned as materials
m diverted from the waste stream during the
manufacturing process. Excluded is the reutilization of ma
mate teeri
r als su
materials such
ch as
a rework
rework, regrind or scrap generated in a process and capable of being
reclaimed with the same process that generated it..
2 Post Consumer Content- This is the material generated
nera
raate
ted by the hou ho
household
ousehold or o by commercial, industrial and institutional facilities in their role as
end users of the product which can no longer be used
s d for
use for its
it intended
inteen ded purpose.
nd pu

AbdulRaheem Sultan
n
age
er]
[System Sales Manager]