SHREEYASH PRATISHTHAN’S
SHREEYASH COLLEGE OF ENGINEERING AND TECHNOLOGY
(POLYTECHNIC), CHH. SAMBHAJINAGAR
MICRO-PROJECT REPORT
NAME OF DEPARTMENT:-COMPUTER SCIENCE ENGINEERING
ACADEMIC YEAR:- 2024-25
SEMESTER:-THIRD
COURSE NAME:-DIGITAL TECHNIQUE
COURSE CODE:-313303
MICRO-PROJECT TITLE:-BLINKING LED USING 555 TIMER IC
PREPARED BY:-
1) ADITYA SUSLADE EN. NO.23511510247
2) DIPALI ATHAWALE EN. NO. 23511510248
3) CHAITANYA TALEKAR EN. NO. 23511510249
4) ADITYA DAHALE EN. NO. 23511510250
UNDER THE GUIDANCE OF:- Prof.V.S.JOSHI
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI
CERTIFICATE
This is to certify that Mr./ Ms.DIPALI BALU ATHAWALE of THIRD Semester of Diploma in
COMPUTER SCIENCE ENGINEERING of Institute SHREEYASH COLLEGE OF ENGINEERING
AND TECHNOLOGY has successfully completed Micro-Project Work in Course of DIGITAL
TECHNIQUE for the academic year 2024-25 as prescribed in the I-Scheme Curriculum.
Date:-________________ Enrollment No:-23511510248
Place:-CHH.SAMBHAJINAGAR Exam Seat No.:-432147
Signature Signature Signature
Guide HOD Principal
V.S.JOSHI A.C.NAIK S.S.KHANDAGALE
Seal of Institute
ACKNOWLEDGEMENT
We wish to express our profound gratitude to our guide Prof.V.S.JOSHI who guided
us endlessly in framing and completion of Micro-Project. She guided us on all the main
points in that Micro-Project. We are indebted to his constant encouragement, cooperation and
help. It was his enthusiastic support that helped us in overcoming of various obstacles in the
Micro-Project.
We are also thankful to our Principal, HOD, Faculty Members and
classmates for extending their support and motivation in the completion of this MicroProject.
1) ADITYA SUSLADE EN. NO.23511510247
2) DIPALI ATHAWALE EN. NO. 23511510248
3) CHAITANYA TALEKAR EN. NO. 23511510249
4) ADITYA DAHALE EN. NO. 23511510250
Annexure-1
Micro Project Proposal
Title of Micro-Project:-BLINKING LED USING 555 TIMER IC
1.0Course Outcomes Addressed
A Blinking LED course can teach student about the funcationing of circuits,the use of electronic
components and their real world application. it can also help students understand LED technology and its
impact on everyday life.
2.0 Proposed Methodology
To propose a methodology for a blinking LED circuit using a 555 timer IC, we need to outline
the step-by-step approach to building and understanding the operation of the circuit.
1) 555 Timer IC
2) Resistors (R1, R2)
3) Capacitor (C1)
4) LED
5) Power supply (e.g., 9V battery)
6) Breadboard and connecting wires
1.0 Action Plan
Name of
Sr. Details of activity Planned Planned Responsible
No. Week Start Finish
date date Team Members
1 1 &2 Discussion & Finalization of 20/7/24 27/7/24 DIPALI
Topic
2 3 Preparation of the Abstract 27/27/24 3/8/24 ADITYA
3 4 Literature Review 3/8/24 10/8/24 ADITYA CHAITNYA
4 5 Submission of Microproject 10/8/24 24/8/24 DIPALI
Proposal ( Annexure-I)
5 6 Collection of information about 24/8/24 31/8/24 ADITYA
Topic
6 7 Collection of relevant 31/8/24 14/9/24 ALL MEMBER
content / materials for the
execution of Microproject.
7 8 Discussion and submission of 14/9/24 21/9/24 DIPALI
outline of the Microproject.
8 9 Analysis / execution of 21/9/24 28/9/24 ADITYA
Collected data / information and
preparation of Prototypes /
drawings / photos / charts /
graphs / tables / circuits /
Models / programs etc.
9 10 Completion of Contents of 28/9/24 5/10/24 CHAITNYA
Project Report
10 11 Completion of Weekly progress 5/10/24 19/10/24 DIPALI
Report
11 12 Completion of Project Report ( 19/10/24 19/10/24 DIPALI
Annexure-II)
12 13 Viva voce / Delivery of 11/11/24 11/11/24 ALL MEMBER
Presentation
2.0 Resources Required
Sr. Name of Resources / Materials Specification Qty Remarks
No.
1 Power Supply 1
2 LED 1
3 555 Timer Ic 1
Names of Team Members with En. Nos.
1) ADITYA SUSLADE EN. NO.23511510247
2) DIPALI ATHAWALE EN. NO. 23511510248
3) CHAITANYA TALEKAR EN. NO.
23511510249
4) ADITYA DAHALE EN. NO. 23511510250
Micro-Project Report
Title of Micro-Project:- BLINKING LED USING 555 TIMER IC
1.0 Rationale
A Blinking LED circuit using a 555 timer IC can be easily designed by configuring the 555 in astable mode
where it continuously oscillates between high and low states, creating a blinking effect for the LED. Here's a
simple relational breakdown of how the components work
2.0 Aims/Benefits of the Micro-Project:-
The aim of a blinking LED circuit using a 555 timer IC is to design a simple electronic circuit that toggles an
LED on and off at regular intervals. The 555 timer IC is used in astable mode to generate a continuous
square wave output, which drives the LED to blink at a certain frequency.
Benefits:
1. Learning Basic Electronics: Building a blinking LED circuit introduces beginners to the concepts of
oscillators, timers, and basic components like resistors, capacitors, and LEDS.
2.Understanding the 555 Timer ICThis project helps users understand how the versatile 555 timer works in
astable mode, which is crucial for generating oscillations and timing signals.
3. Simple and Cost-Effective The components required are inexpensive and widely available, making
this a budget-friendly project.
3.0 Course Outcomes Achieved
1) Understand if the 555 timer ic
2) Circuit diagram
3) Practical implementation.
4.0 Literature Review:-
1) Overview of 555 Timer IC
2) Components and Circuit Design
3)Working principle
4) Application
5.0 Actual Methodology Followed
The 555 timer IC is a versatile integrated circuit used in various timing and pulse generation applications. To
create a blinking LED circuit using a 555 timer IC, we configure it in astable mode, where it generates a
continuous square wave. This output can turn an LED on and off, creating the blinking effect.
Pin 1 (Ground): Connect to the negative terminal of the power supply.
Pin 2 (Trigger) and Pin 6 (Threshold): These are connected together to form a feedback loop.
Pin 3 (Output): This will provide the signal to blink the LED. Connect the positive side of the LED to this
pin, and use a current-limiting resistor in series with the LED.
Pin 4 (Reset): Connect to the positive terminal of the power supply (Vcc) to avoid resetting the timer.
Pin 5 (Control Voltage): Bypass this pin to ground using a small capacitor (~10nF) for noise filtering. Pin 7
(Discharge): Connect to a resistor (R2) that is also connected to the junction between pins 2 and 6. Pin 8
(Vcc): Connect to the positive terminal of the power supply.
6.0 Actual Resources Used
sr.
Name of Resource/material Specifications Qty Remarks
No.
1 Power Supply 1
LED 1
2
555 Timer Ic 1
3
8.0 Skill Developed/Learning outcome of this Micro-Project
Circuit Design: Learn to design basic electronic circuits using the 555 timer in astable mode.Understand
component selection, such as resistors and capacitors, to set the frequency of the blinking Soldering and
Assembly:Gain hands-on experience in assembling electronic components on a breadboard or PCB.Develop
soldering skills if using a PCB for a permanent setup.
Troubleshooting: Learn to diagnose common issues in electronic circuits, such as incorrect connections or
faulty components. Use of Multimeter:Develop skills in measuring voltage, current, and resistance, which
are essential for testing and debugging circuits.
Understanding of Timing Circuits:Learn how the 555 timer operates, including its astable mode, and how to
calculate frequency and duty cycle.
Basic Programming (optional):If incorporating a microcontroller for advanced control, learn basic
programming concepts.
Leaming OutcomesUnderstanding the 555 Timer: Comprehend the functionality of the 555 timer IC,
Including its pin configuration and operating modes (astable, monostable, and bistable).
LED Behavior:Understand the behavior of LEDs, including forward voltage and current ratings, and how to
use resistors to limit current to protect the LED..
9.0 Applications of this Micro-Project:-
Blinking LED circuit can be used for any visual sign indication in any highways or it can be used in
advertisement hoarding also.L.ED blinking circuit can be used in signaling purpose (It can be used as signal
for help, if you are in danger)LED blinking circuit can be used as flashing beacon.LED blinking circuit can
be used as vehicle indicator when it is broke down in the middle of the road. It can be used in operation
theaters or offices as an indication that you are engaged in work. There are lots of applications with these
two circuits.
MICRO-PROJECT EVOLUTION SHEET
Name of Student:-Dipali Balu Athawale En. No:- 23511510248
Name of Program:-_Digital Technique Semester:-Third
Course Name:- Computer Engineering Course Code:-313303
Title of The Micro-Project:- Blinking LED using 555 Timer Ic
Course Outcomes Achieved:-
The course outcome for a project or lesson involving the blinking LED using a 555 timer IC
Understanding of 555 Timer IC Circuit Design and AnalysisPractical SkillsTroubleshooting Circuit Issues
Simulation and Testing
Sr. Poor Average Good Excellent Sub
Characteristic to be
No. (Marks1-3) (Marks4-5) (Marks 6-8) (Marks9-10) Total
assessed
(A) Process and Product Assessment (Convert Below total marks out of 6Marks)
1 Relevance to the course
2 Literature
Review/information
collection
3 Completion of the Target as
Per project proposal
4 Analysis of Data and
representation
5 Quality of Prototype/Model
6 Report Preparation
(B) Individual Presentation/Viva(Convert Below total marks out of 4Marks)
7 Presentation
8 Viva
(A) (B) Total Marks
Process and Product Individual Presentation/ Viva
Assessment (6 marks) (4 marks) 10
Name of Course Teacher:-V.S.JOSHI
Dated Signature:-_____
_____________
