N95 VALVED RESPIRATOR

TECHNICAL SPECIFICATION SHEET

Our N95 Valved Respirator are designed to help you stay cool while
providing you with a better fit. The respirator valve reduces temperature
by 10°F keeping you cool while at work. MILWAUKEE® masks feature
two soft adjustable straps and a flexible nose bridge
allowing you to achieve a better fit. Flexible Nose Bridge

Stay Cool Valve

 Material Composition: Straps: Braided Spandex, Nose Bridge: Reduces Heat by 10°
Aluminum, Nose Pad: Polyester Foam, Cinch Lock: Polypropylene,
Cinch Loop: Polypropylene, Filter Media: Polypropylene, Valve
Base: Polypropylene, Valve Cover: Polypropylene, Valve: TPE

 Country of Origin: INDIA

Soft
U
 se For Statement/Applications: use for protection against Adjustable Straps
non-oil based particulates from sanding, cutting, grinding, insulation
particles, mowing, sweeping, bagging, processing minerals, coal, iron Staple-Free Attachment
ore, flour, metal, wood, and pollen. Reduces Irritation
Always refer to regulations and procedures from federal, state and
government agencies, such as OSHA, for selecting, using, and
maintaining proper respiratory protection in the workplace.

 Do Not Use: Do not use for any toxic or harmful substances (lead or
asbestos), gases, vapors, paint spray, oil based mists or particulates,
concentrations of particulates that exceed OSHA’s 10X the
permissible exposure limit (PEL), concentrations of containments that
are unknown or are immediately dangerous to life and health (IDLH).
Not for medical use.

SCAN

SCAN
A
 pprovals and Standards: NIOSH N95 Approved. Meets 42
CFR 84 N95 filtration efficiency requirements. Assigned Protection
Factor (APF) of 10 per OSHA & CSA TO SEE
 T C number: TC-84A-8143 MORE or visit https://qr.mke.tl/2r828

T
 ime Use Limitations: Replace the respirator when it is damaged
or difficult to breathe through. Check with your local authorities for
proper disposal of used respirators.

 Inspection, Use, & Care: Before first use, inspect all parts of Acceptable Fit
Fit Test Protocol
the respirator for defects or signs of wear, including the head straps, Test Protocols
nose clip, foam, etc. Do not use dirty, damaged, or defective respirators. SACCHARIN X
Always refer to instructions provided with your respirator.
BITREX ™
X
QUALITATIVE PROTOCOLS
S
 helf Life: 5 years from the date of manufacture. Use respirators IRRITANT SMOKE
before the “USE BY” date specified on the packaging.
ISOAMYL ACETATE
S
 torage: Keep respirator sealed in its original packaging and away QUANTITATIVE PROTOCOLS X
from contaminates, dust, sunlight, extreme temperatures, excessive
moisture and damaging chemicals.

 F it Test Protocols: Recommend Quantitative Fit Testing or Qualitative

Fit Tests (saccharin or Bitrex™). Refer to company’s written program Respirator Classification
protocols and OSHA 29 CFR 1910.134 for additional information. PARTICULATE FILTERING
FILTER CLASS OIL RESISTANCE
EFFICIENCY
 SKUs
48-73-4011 N95 VALVED RESPIRATOR N NOT RESISTANT TO OIL 95%

48-73-4012 3 Pk N95 VALVED RESPIRATOR *Refer to OSHA 29 CFR 1910.134 for additional information

48-73-4014 10 Pk N95 VALVED RESPIRATOR

 Read and understand all safety warnings, instructions, illustrations and specifications provided. Failure to follow all instructions may result in sickness or death.
Save all warnings and instructions for future reference. Respirators are intended to help protect the wearer by reducing their exposure to airborne harmful contaminants from a level that may be
hazardous to one that is considered safe or acceptable according to government established levels. Employers must comply with regulations and procedures from federal, state and government agencies,
such as OSHA, for selecting, using, and maintaining proper respiratory protection in the workplace. Before occupational use of this respirator, a written respiratory protection program must be implemented
meeting all the local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical evaluation, training, and fit testing.
In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate.
W
 arranty: Limited Lifetime Warranty against manufacturer defects
C
 ontact Info: 1-800-SAWDUST or MILWAUKEETOOL.COM