MAGIC-X Wired USB Controllers 04 Button on the side of the adapter The different game console systems can

Wired USB Controllers 04 Button on the side of the adapter The different game console systems can 3. Pair your Xbox Series S/X controller with MAGIC-X again by pressing the button on the adapter and pair
DualSense, DualShock 4, DualShock 3, Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 Press the button shortly to pair the recognize the adapter automatically. If not, button on your controller (LED indicator blinks quickly). The pairing process may take a few seconds. Please be
Connect your Bluetooth or wired USB controllers to your Xbox Series X/S, Xbox One, PS3, Switch,
TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and controllers and the adapter. The indicator you can press and hold the button on the side patient! The connection may be disconnected shortly and then connected again during the pairing process.
PC Windows, macOS, NEOGEO mini, NEOGEO Arcade Stick Pro, PS Classic, SEGA MEGA DRIVE
SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic blinks quickly. of the adapter for 3-5 seconds to switch the Please wait patiently until the LEDs stop blinking.
mini, SEGA Genesis Mini, SEGA Astro City Mini, Raspberry Pi, Steam entertainment system.
Controller, Switch Taiko Drum, PS4 Taiko Drum. mode you need. 4. The LED indicator becomes solid when connection is successful.

MAGIC-X
If you find any issues or have any difficulty operating the device,please reach out to us at
[email protected] and we will be more than happy to help you out. Update to the latest The wireless controller that comes from your console will become a wired controller by simply 06 Wired Controllers Set UP
firmware at www.mayflash.com connecting a standard USB cable (with exception of Xbox 360 which requires an official Microsoft Switch Xbox PC Connect the adapter into any spare USB port on your game
USB Wireless Adapter wired Xbox 360 controller). For best results, it is recommended that you use original Switch console.
System Compatibility
Controllers, or genuine Xbox or PlayStation controllers and quality certified USB cables.
Connect the wired controller to the adapter. The wireless
Quick Start Guide 05 Bluetooth Controllers Set Up controller that comes from your console will become a wired
controller by simply connecting a standard USB cable (with
Connect the adapter into any spare USB port on your
01 USB A-Male Switch Button exception of Xbox 360 which requires an official Microsoft
game console.
Switch Xbox Series X Xbox Series S Xbox One PlayStation 3 Connect the adapter to your game console. LED Indicator wired Xbox 360 controller).
To switch the modes, press and hold the button on the Your controller is now ready to use.
02 USB A-Female side of the adapter for 3-5 seconds. The LED indicator
Connect the wired game controllers to the USB A-Male
blinks slowly. Using Bluetooth Headset (For Switch / LED Red and Xbox / LED Blue)
adapter. Turn on the Bluetooth controller, press the Button on the
Windows macOS NEOGEO mini NEOGEO Arcade PS Classic Mini USB A-Female Turn on your Bluetooth headset to enter into the pairing mode.
Stick Pro 03 LED Indicators side of the adapter, and then press the pair button on your
Bluetooth controller. The LED indicator blinks quickly. Press the pair button on the side of the adapter, LED indicator starts to blink rapidly, wait
NEOGEO Arcade SEGA MEGA DRIVE Mini/ for a few seconds.
System mode Switch Switch Pro Xbox/macOS
PS3/Raspberry Pi/ Raspberry Pi/
Stick Pro/ PS Classic SEGA Genesis Mini/ LED indicator becomes solid when connection is successful.
PC (Dinput) PC/Steam (Xinput)
NEOGEO mini SEGA Astro City Mini LED becomes solid when the connection is successful.
Note:
Note:
SEGA Genesis Mini SEGA Mega SEGA Astro Raspberry Pi Steam LED Indicator Red Purple Blue Yellow Green White Cyan White * If the Bluetooth pairing failed, please connect the Bluetooth controller to the adapter using a USB cable (not
* Xbox mode works with both A2DP(High quality audio signals) and HFP(Audio and chatting) connections.
Drive Mini City Mini included in the packaging, you can purchase it separately). As soon as the controller is identified by the system,
* LED Indicator blinks slowly: The Bluetooth is not connected yet. System Settings Switch mode only works with A2DP connection.
you can remove the USB cable and start to pair it again.
Controller Compatibility * LED Indicator blinks quickly: The Bluetooth is Pairing. * To use HFP connection on Xbox, press and hold the START + X/□ button on your controller.
* If you are having the issues connecting a Xbox Series S/X or Xbox Elite 2 controller to the MAGIC-X, this is To use A2DP connection on Xbox, press and hold the START + Y/△ button on your controller.
* LED Indicator becomes solid: The connection is successful. Controllers Pro Controller Wired *
Bluetooth Controllers
ON what we recommend: Switch mode (LED is Red) does not support 6-axis motion and vibration.
*
and Sensors Communication

User manual
* Switch Pro mode (LED is purple): Go to System Setting > Controller
1. Disable or turn off any Bluetooth device (like your Smart TV or Set Top Box etc.) within range of the controller. If you need the 6-axis motion and vibration, please go to Switch Pro mode (LED is Purple).
DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox and Sensors > Turn on Pro Controller Wired Communication.
2. Turn off your Xbox Series S/X controller and turn it on again.
Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro. * Bluetooth headset works for Switch mode (LED is red) and PS4 mode (LED is blue).
Modify the Vibration Intensity Update the Software The Touch Pad button on the PS4 Controller
PS5 DualSense L1 R1 Create OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
If you are having problems with the adapter, you can follow the below instructions to update. works as the Capture button of the
Press and hold the Button R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
Joy-Con or Switch Pro controller when you DualShock 4/macOS L1 R1 SHARE OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
(Please keep holding these two buttons until you finish the below whole process). Download the software from http://www.mayflash.com/Support connect your PS4 controller to the Switch
To modify the vibration intensity, press the D-Pad “Up” or “Down”. and install it on your Windows system. system by the adapter. Please see more
DualShock 3 L1 R1 SELECT START L3 R3 LS RS POV L2 R2 PS SELECT + START

To quit the modification, release any button of R1/RB or R3 once you’ve got your preferred Double click on the updater and leave the updater window details about the other controllers on the Switch Pro L R L3 R3 LS RS POV ZL ZR HOME + or

vibration intensity. open on your screen. below “Controllers Buttons Table”. Joy-Con L R L3 R3 LS RS POV ZL ZR HOME + or

There are 7 levels of the vibration intensity. The default one is 100%. Press and hold the button on the side of To disconnect the controller and the
Xbox Series X/S LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU
the adapter, and connect the USB from adapter, press the button on the side of
Switch Pro mode vibration levels:
your adapter into any spare port on your the adapter. But if you want to disconnect Xbox One LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU
0% 25% 37.5% 50% 62.5% 75% 100%
PC. Wait for 3-5 seconds. the Xbox Elite 2 and the adapter, you need
Xbox 360 LB RB BACK START L3 R3 LS RS POV LT RT HOME BACK + START
PS3, PC Xinput vibration levels:
As soon as the adapter has been to press and hold the HOME button on
50% 62.5% 75% 87.5% 100% 125% 150%
recognized, you may release the button. your controller to shut off the power. PC-Xinput X/Y Axis X/Y Circle POV Z+ Z- HOME

Select “Update”. The adapter can remember up to 6 paired PC-Dinput X/Y Axis Z Axis Circle POV
Adjust the Dead Zone D-Pad “Down” 50% 62.5% 75% 87.5% 100% 125% 150% D-Pad “Up”
wireless controllers. But if your controller is
Do not disconnect the device until you are a BLE device like Xbox Series X/S, then the
Wii U Pro L R L3 R3 LS RS POV ZL ZR HOME +
Press and hold the Button START and D-Pad Left or D-Pad Right. Once the LED on the adapter informed that the update is completed adapter can only remember one. Wii Classic Pro L R LS RS POV ZL ZR HOME +
starts to blink, you may release the Button D-Pad Left or D-Pad Right, BUT keep holding the successfully.
Button START. Wii mote + Nunchuck LS POV Z+ HOME +
To increase or decrease the dead zone, press the D-Pad “Up” or “Down”. Additional Functions
GENESIS mini Controller START POV POV
As soon as you get the right dead zone value, you may release the Button START to quit the Only one Bluetooth controller is supported for one adapter.
MEGA DRIVE mini Controller MODE START POV POV
process.
A wired USB controller and a wireless Bluetooth controller can be connected at the same time,
There are 7 levels of the Dead Zone Value. The default one is Level 3. This device complies with part 15 of the FCC PS4 Taiko Drum L1 R1 SHARE OPTIONS
Beat the Beat the
POV
Beat the Beat the
PS
but both of them have the same functions and can only play one game character. Drum Left Drum Right Drum Left Drum Right
Rules. Operation is subject to the following Beat the Beat the Beat the Beat the
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 To switch A-B,B-A,X-Y,Y-X, press and hold two conditions:(1) This device may not cause Switch Taiko Drum L R
Drum Left Drum Right
POV
Drum Left Drum Right
HOME Capture
0% 2.5% 5% 7.5% 10% 12.5% 15% the button “START” and “A” for 3 harmful interference, and(2) this device must PS Classic L1 R1 POV
SELECT START L2 R2
You can know the Dead Zone Level by the times of the LED
seconds.To switch A-A, B-B, X-X, Y-Y, press accept any interference received, including
blinking during the adjusting process. For example, LED on and hold the button “START” and “B” for 3 interference that may cause undesired
NEOGEO mini SELECT START Joystick Joystick
the adapter blinks 3 times then stops when Dead Zone seconds. (This function is optional. It operation. NEOGEO Arcade Stick PRO SELECT START Stick Options
Level is Level 3.
D-Pad “Down” 0% 2.5% 5% 7.5% 10% 12.5% 15% D-Pad “Up”
depends on the different controllers.) White Button Gray Button White Button Gray Button