SANDPIPER BEAST 2” CLOG RESISTANT HEAVY DUTY FLAP VALVE PUMP

TECHNICAL DATA SHEET

SERIES
BEAST NON-METALLIC HEAVY DUTY FLAP VALVE PUMP
Patent pending, clog resistant flap valve design

PERFORMANCE
SUCTION / DISCHARGE PORT SIZE
• 2" NPT (F)
• 2" BSPT (F)
• 2" ANSI / DIN Flange
CAPACITY
• 0 to 170 GPM (0 to 644 LPM)
AIR DISTRIBUTION VALVE
• No-lube, no-stall design BAR

PSI 10 (17)
Performance based on water at ambient temperature.
SOLIDS-HANDLING 7 100
100 P
20 (34)
30 (51)
AIR CONSUMPTION IN SCFM
SI (6.8
• Up to 1.8 in. (45.7mm)
40 (68)
Bar) AIR PRESSURE IN PSI
6
HEADS UP TO
50 (85)
80
80 PSI Dim B
• 100 psi or 231 ft. of water 5
(5.44 B
ar)
29.70
Dim A
(7 bar or 70 meters) 60
754
HEAD

4 60 PSI 60 (102)
MAXIMUM OPERATING PRESSURE (4.08 B
ar)

• 100 psi (7 bar) 3

40
40 PSI (2
DISPLACEMENT/STROKE .72 Bar)
2
• .50 Gallon / 1.9 liter
20
WEIGHTS 1 20 PSI (1.36 Bar
) Air Inlet Pressure
20.89
531

• Pump: 58 lbs. (27kg)

• Shipping: 70 lbs. (31.7kg) 0
0 20 40 60 80 100 120 140 160 180 GPM PORT
DISCHARGE
2" FNPT
0 100 200 300 400 500 600 700 2" BSPTLPM

CAPACITY
DIMENSIONS 2X .13
2.00
51 3
3
12.65 7
321 12.65
29.70 3.00
29.70 6.88 321 3.00
754 76
175 6.88
754 76
SUCTION
175 PORT SUCTION
2" NPT PORT 12.02
2" BSPT 2" NPT STANDARD ENCAPSULATED
305
2" BSPT
MUFFLER 1" NPT EXHAUST PORT FOR
4X .41 OPTIONAL MUFFLER STYLES OR PIPING
10 EXAUST AIR IN SUBMERGED APPLICATIONS

DIMENSIONAL TOLERAN
20.89 9.00
20.89
531 17.56 229 MUFFLER OPTION D
531 17.56
446 INTEGRAL MUFFLER 6.
446
MESH MUFFLER
9.
SOUND DAMPENING MUFFLER
DISCHARGE PORT
2" FNPT DISCHARGE PORT 9.78
2" FNPT 9.78
2" BSPT 248
2" BSPT 248
AIR INLET
3/4 NPT

2.00
2X .13 2.00
2X .13 51 3.00 3.00
3 51
3 76 76

12.02 12.02
305 305
STANDARD ENCAPSULATED
STANDARD ENCAPSULATED
MUFFLER 1" NPT EXHAUST
MUFFLER PORT
1" NPT FOR PORT FOR
EXHAUST
OPTIONAL MUFFLER STYLES
OPTIONAL OR PIPING
MUFFLER STYLES OR PIPING
4X .41 4X .41 EXAUST AIR IN SUBMERGED APPLICATIONS
EXAUST AIR IN SUBMERGED APPLICATIONS
10 10
5 YEAR LIMITED PRODUCT WARRANTY USE ONLY GENUINE SANDPIPER PARTS
EX
CLUSIVE
5 Year Guarantee for defects in material or workmanship. See All certification, standards, guarantees & warranties
sandpiperpump.com/content/warranty-certifications originally supplied with this pump will be invalidated by the use of
DIMENSIONAL TOLERANCE
DIMENSIONAL.13 [3]
TOLERANCE .13 [3]
9.00 9.00
FE
AT U R E
for complete warranty, including terms and conditions,
229 MUFFLER OPTION
limitations service parts not identified as “Genuine
229 DIM "A"
MUFFLER OPTION DIM"A"
DIM "B" DIM "B"
INTEGRAL MUFFLER 6.88 [175]
INTEGRAL MUFFLER 12.65
6.88 [321]
[175] 12.65 [321]

and exclusions. MESH MUFFLERMESH MUFFLER

9.38 [238] 9.38 [238]
15.15 [385] 15.15 [385] SANDPIPER Parts.”
SOUND
SOUND DAMPENING DAMPENING MUFFLER
MUFFLER

AIR INLET AIR INLET

3/4 NPT 3/4 NPT

Warren Rupp, Inc. • A Unit of IDEX Corporation

800 N. Main St., Mansfield, Ohio 44902 USA ISO 9001 Certified
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 ISO 14001 Certified
EXPLANATION OF PUMP NOMENCLATURE
Your Model #: SP B 20 F 0 S S 0 R 1
(fill in from
pump nameplate)

Pump Product Pump Check Wetted Non-Wetted Diaphragm Backup Check Valve Seat Air Air Valve Exhaust Port Port Design
Brand Line Size Valve Type Material Material Material Diaphragm Material Material Valve Option Option Type Option Level

PUMP BRAND DIAPHRAGM MATERIAL AIR VALVE OPTION

SP SANDPIPER B Nitrile (Buna) 0 None
E EPDM B Stainless Steel Sleeve & Brass Spool
PRODUCT LINE F FDA Nitrile
B The Beast Flap N Neoprene
R Santoprene EXHAUST OPTION
PUMP SIZE
H Hytrel 0 Encapsulated Polypropylene
20 2”
V FKM (Viton) 6 Threaded Metal
CHECK VALVE TYPE
PORT TYPE
F Flap Valve
BACKUP DIAPHRAGM B BSPT
WET END MATERIALS 0 None N NPT
A Aluminum U Universal ANSI/DIN Flange
CHECK VALVE MATERIAL
I Cast Iron S Stainless Steel PORT OPTION
P Polypropylene R Center Ported
S Stainless Steel SEAT MATERIAL
S Stainless Steel DESIGN LEVEL
NON-WETTED MATERIAL 1 Design Level
A Aluminum AIR VALVE
0 SANDPIPER Standard ESADS
I Cast Iron
P Polypropylene
W White Epoxy Coated Aluminum

MATERIALS
Material Profile: Operating
Temperatures:
POLYPROPYLENE: A thermoplastic polymer. Moderate tensile
and flex strength. Resists stong acids and alkali. Attacked by
180°F
82°C
32°F
0°C
CAUTION! Operating temperature limitations are as follows: chlorine, fuming nitric acid and other strong oxidizing agents.
Max. Min.
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with 250°F 0°F
CONDUCTIVE ACETAL: Tough, impact resistant, ductile. Good 190°F -20°F
excellent chemical resistance. Excellent for UV applications. 121°C -18°C
abrasion resistance and low friction surface. Generally inert, 88°C -29°C
High tensile strength and impact resistance.
with good chemical resistance except for strong acids and
oxidizing agents. SANTOPRENE®: Injection molded thermoplastic elastomer with 275°F -40°F
no fabric layer. Long mechanical flex life. Excellent abrasion 135°C -40°C
EPDM: Shows very good water and chemical resistance. Has 280°F -40°F
resistance.
poor resistance to oils and solvents, but is fair in ketones and 138°C -40°C
alcohols. UHMW PE: A thermoplastic that is highly resistant to a broad 180°F -35°F
range of chemicals. Exhibits outstanding abrasion and impact 82°C -37°C
FKM (FLUOROCARBON): Shows good resistance to a wide 350°F -40°F
resistance, along with environmental stress-cracking resistance.
range of oils and solvents; especially all aliphatic, aromatic and 177°C -40°C
halogenated hydrocarbons, acids, animal and vegetable oils. URETHANE: Shows good resistance to abrasives. Has poor 150°F 32°F
Hot water or hot aqueous solutions (over 70°F(21°C)) will attack resistance to most solvents and oils. 66°C 0°C
FKM.
VIRGIN PTFE: (PFA/TFE) Chemically inert, virtually impervious. 220°F -35°F
HYTREL®: Good on acids, bases, amines and glycols at room 220°F -20°F Very few chemicals are known to chemically react with PTFE; 104°C -37°C
temperatures only. 104°C -29°C molten alkali metals, turbulent liquid or gaseous fluorine and a few
fluoro-chemicals such as chlorine trifluoride or oxygen difluoride
NEOPRENE: All purpose. Resistance to vegetable oils. Gener- 200°F -10°F
which readily liberate free fluorine at elevated temperatures.
ally not affected by moderate chemicals, fats, greases and 93°C -23°C
many oils and solvents. Generally attacked by strong oxidizing Maximum and Minimum Temperatures are the limits for which these materials can be
acids, ketones, esters and nitro hydrocarbons and chlorinated operated. Temperatures coupled with pressure affect the longevity of diaphragm pump
aromatic hydrocarbons. components. Maximum life should not be expected at the extreme limits of the
temperature ranges.
NITRILE: General purpose, oil-resistant. Shows good solvent, 190°F -10°F
oil, water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
88°C -23°C
Metals:
hydrocarbons and nitro hydrocarbons. ALLOY C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.
NYLON: 6/6 High strength and toughness over a wide tem- 180°F 32°F STAINLESS STEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-
perature range. Moderate to good resistance to fuels, oils and 82°C 0°C sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for
chemicals. general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.

Warren Rupp, Inc. • A Unit of IDEX Corporation

800 N. Main St., Mansfield, Ohio 44902 USA
S A N D P I P E R P U M P. C O M Telephone 419.524.8388 • Fax 419.522.7867 SP_DS_BeastNM_0122