0% found this document useful (0 votes)
32 views5 pages

6GK52062BB002AC2 Datasheet en

Uploaded by

toni.wadih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
32 views5 pages

6GK52062BB002AC2 Datasheet en

Uploaded by

toni.wadih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Data sheet 6GK5206-2BB00-2AC2

SCALANCE XC206-2 manageable Layer 2 IE switch; IEC 62443-4-2 certified; 6x


100 Mbit/s RJ45 ports; 2x 100 Mbit/s ST/BFOC ports; 1x console port; diagnostics
LED; redundant power supply; temperature range -40 °C to +70 °C; assembly: DIN
rail/S7 mounting rail/wall redundancy functions; office features (RSTP, VLAN,...);
PROFINET IO device; Ethernet/IP-compliant C-PLUG slot;

product type designation


product brand name SCALANCE
product type designation XC206-2
transfer rate
transfer rate 10 Mbit/s, 100 Mbit/s
interfaces / for communication / integrated
number of electrical connections
● for network components or terminal equipment 6; RJ45
number of 10/100 Mbit/s RJ45 ports
● with securing collar 6
number of 100 Mbit/s ST(BFOC) ports
● for multimode 2
transmission method / of the optical interface 100BaseFX
interfaces / other
number of electrical connections
● for operator console 1
● for signaling contact 1
● for power supply 1
type of electrical connection
● for operator console RJ11
● for signaling contact 2-pole terminal block
● for power supply 4-pole terminal block
design of the removable storage
● C-PLUG Yes
operating voltage / of the signaling contacts
● at DC / rated value 24 V
operational current / of the signaling contacts
● at DC / maximum 0.1 A
supply voltage, current consumption, power loss
product component / connection for redundant voltage supply Yes
type of voltage / 1 / of the supply voltage DC
● supply voltage / 1 / rated value 24 V
● power loss [W] / 1 / rated value 6W
● consumed current / 1 / at rated supply voltage / maximum 0.25 A
● supply voltage / 1 / rated value 9.6 ... 31.2 V
● consumed current / 1 / maximum 0.5 A
● type of electrical connection / 1 / for power supply 4-pole terminal block
● product component / 1 / fusing at power supply input Yes
● fuse protection type / 1 / at input for supply voltage 2.5 A/ 125 V
ambient conditions

6GK52062BB002AC2 Subject to change without notice


10/1/2024
Page 1/5 © Copyright Siemens
ambient temperature
● during operation -40 ... +70 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
relative humidity
● at 25 °C / without condensation / during operation / 95 %
maximum
protection class IP IP20
design, dimensions and weights
design compact
width 60 mm
height 147 mm
depth 125 mm
net weight 0.54 kg
material / of the enclosure Polycarbonate (PC-GF10) / pressure die cast aluminum
fastening method
● 35 mm top hat DIN rail mounting Yes
● wall mounting Yes
● S7-300 rail mounting Yes
● S7-1500 rail mounting Yes
product features, product functions, product components / general
cascading in the case of a redundant ring / at reconfiguration 50
time of <\~0.3\~s
cascading in cases of star topology any (depending only on signal propagation time)
product function
● QoS according to DSCP Yes
product feature
● Cut Through switching method No
● Store & Forward switching method Yes
product functions / management, configuration, engineering
product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
● configuration with STEP 7 Yes
● RMON Yes
● SMTP server No
● port mirroring Yes
● multiport mirroring Yes
● CoS Yes
● PROFINET IO diagnosis Yes
● switch-managed Yes
PROFINET conformity class B
telegram length / for Ethernet / maximum 1632 byte
protocol / is supported
● Telnet Yes
● HTTP Yes
● HTTPS Yes
● TFTP Yes
● SFTP Yes
● BOOTP No
● GMRP Yes
● DCP Yes
● LLDP Yes
● EtherNet/IP Yes
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
● IGMP (snooping/querier) Yes
identification & maintenance function

6GK52062BB002AC2 Subject to change without notice


10/1/2024
Page 2/5 © Copyright Siemens
● I&M0 - device-specific information Yes
● I&M1 - higher level designation/location designation Yes
product functions / diagnostics
product function
● port diagnostics Yes
● statistics Packet Size Yes
● statistics packet type Yes
● error statistics Yes
● SysLog Yes
product functions / VLAN
product function
● VLAN - port based Yes
● VLAN - protocol-based No
● VLAN - IP-based No
number of VLANs / maximum 257
number of VLANs - dynamic / maximum 257
number of VLANs / at ring redundancy (HRP; MRP; standby 257
link)
product functions / DHCP
product function
● DHCP server Yes
● DHCP client Yes
● DHCP Option 82 Yes
● DHCP Option 66 Yes
● DHCP Option 67 Yes
product functions / redundancy
protocol / is supported / Media Redundancy Protocol (MRP) Yes
product function
● media redundancy protocol (MRP) with redundancy Yes
manager
● Media Redundancy Protocol Interconnection (MRP-I) Yes
● of the PROFINET IO device / is supported / H-Sync Yes
forwarding
● of the PROFINET IO device / is supported / PROFINET Yes
system redundancy
● ring redundancy Yes
● high speed redundancy protocol (HRP) with redundancy Yes
manager
● high speed redundancy protocol (HRP) with standby Yes
redundancy
● redundancy procedure STP Yes
● redundancy procedure RSTP Yes
● redundancy procedure RSTP+ Yes
● redundancy procedure MSTP Yes
● Parallel Redundancy Protocol (PRP)/operation in the Yes
PRP-network
● Parallel Redundancy Protocol (PRP)/Redundant Network No
Access (RNA)
● passive listening Yes
protocol / is supported
● LACP Yes
system modification during operation
product function / configuration in RUN via CiR/H-CiR Yes
product functions / security
product function
● IEEE 802.1x (radius) Yes
● RADIUS client Yes
● broadcast/multicast/unicast limiter Yes
● broadcast blocking Yes
protocol / is supported
● SSH Yes
● SSL Yes
product functions / time

6GK52062BB002AC2 Subject to change without notice


10/1/2024
Page 3/5 © Copyright Siemens
product function
● SICLOCK support Yes
● NTP-client Yes
● SNTP client Yes
protocol / is supported
● NTP Yes
● SNTP Yes
standards, specifications, approvals
certificate of suitability
● CE marking Yes
● Regulatory Compliance Mark (RCM) Yes
product conformity / according to EMC-guideline 2014/30/EU
standard
● for EMC interference emission EN 61000-6-4, EN 50121-4
● for immunity to EMC EN 61000-6-2, EN 50121-4
● for safety / from CSA and UL UL 60950-1 E115352
standards, specifications, approvals / hazardous environments
certificate of suitability
● ATEX Yes
● UKEX Yes
● IECEx Yes
● ULhazloc approval Yes
● CCC / for hazardous zone according to GB standard Yes
● FM registration Yes
standards, specifications, approvals / other
certificate of suitability
● railway application in accordance with EN 50121-4 Yes
● RoHS conformity Yes
IT security for industrial automation systems / according to IEC Yes
62443-4-2:2019
standards, specifications, approvals / marine classification
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS) Yes
● French marine classification society (BV) Yes
● DNV GL Yes
● Korean Register of Shipping (KRS) Yes
● Lloyds Register of Shipping (LRS) Yes
● Nippon Kaiji Kyokai (NK) Yes
● Polski Rejestr Statkow (PRS) Yes
● Royal Institution of Naval Architects (RINA) Yes
standards, specifications, approvals / Environmental Product Declaration
Environmental Product Declaration Yes
Global Warming Potential [CO2 eq]
● total 220.3 kg
● during manufacturing 32.08 kg
● during operation 187.75 kg
● after end of life 0.48 kg
product functions / general
MTBF 46 a
reference code
● according to IEC 81346-2 KF
● according to IEC 81346-2:2019 KFE
Warranty period 5a
product function / is supported / identification link Yes; according to IEC 61406-1:2022
further information / internet links
internet link
● to website: Selection guide for cables and connectors https://support.industry.siemens.com/cs/ww/en/view/109766358
● to web page: selection aid TIA Selection Tool https://www.siemens.com/tstcloud
● to website: Industrial communication https://www.siemens.com/simatic-net
● to web page: SiePortal https://sieportal.siemens.com/
● to website: Image database https://www.automation.siemens.com/bilddb

6GK52062BB002AC2 Subject to change without notice


10/1/2024
Page 4/5 © Copyright Siemens
● to website: CAx-Download-Manager https://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
security information
security information Siemens provides products and solutions with industrial cybersecurity functions
that support the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber
threats, it is necessary to implement – and continuously maintain – a holistic,
state-of-the-art industrial cybersecurity concept. Siemens’ products and
solutions constitute one element of such a concept. Customers are responsible
for preventing unauthorized access to their plants, systems, machines and
networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or
network segmentation) are in place. For additional information on industrial
cybersecurity measures that may be implemented, please visit
www.siemens.com/cybersecurity-industry. Siemens’ products and solutions
undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are
no longer supported, and failure to apply the latest updates may increase
customer’s exposure to cyber threats. To stay informed about product updates,
subscribe to the Siemens Industrial Cybersecurity RSS Feed under
https://www.siemens.com/cert. (V4.7)
Approvals / Certificates
General Product Approval

Declaration of Con- Declaration of Con-


formity formity

General Product Ap-


EMV For use in hazardous locations
proval

KC FM CCC-Ex

Marine / Shipping

NK / Nippon Kaiji Ky-


okai

Marine / Shipping Environment Industrial Communication

Confirmation PROFINET

last modified: 8/16/2024

6GK52062BB002AC2 Subject to change without notice


10/1/2024
Page 5/5 © Copyright Siemens

You might also like