Grease separator EasyClean free NS 7, Auto Mix & Pump
Article information
Item no.: 93007.01/PVS
GTIN: 4026092060995
Price group: 60
Advantages
Direction of flow can be changed thanks to self-
sealing interchangeable hubs (NS 2- NS 10)
Clean and odour-free disposal and cleaning
Customisation possible through control unit
Description
The separator for greasy wastewater is suitable for free-standing set-up in frost-
protected rooms and comes without metallic components in the tank. The
collecting tank made of permanently resistant polymer (PE) is equipped with an
integrated sludge trap and has a tapered base for fast and clean disposal. Two
odour-tight covers with quick-release closures make easy access possible for
cleaning and maintenance work. The innovative Shredder-Mix-System with
integrated macerating system is responsible for homogenising and circulating the
tank contents. Cleaning and odour-neutral disposal takes place via an exterior
pump with 2-way valve and actuator which can be disconnected from the tank by a
shut-off valve. The fully automatic program run is controlled by a user-friendly
control unit with multi-line display that can be integrated into the building
management system through a potential-free contact. Cleaning and disposal can
be started remotely using the remote control, which is available as an option.
Thanks to the customisable cleaning program with fast-selection function, cleaning
can be adapted to the local circumstances as required. After disposal, a maximum
of 3 litres residual sludge volume is left in the tank. Observance of the Drinking
Water Hygiene Directive can be guaranteed through the fully automatic rinsing of
the drinking water pipes. 20 year polyethylene warranty.
Variant
Shut-off valve: yes
Disposal variant: Auto Mix & Pump
Shredder-Mix-System: yes
Sludge bucket: yes
Nominal size (NS): 7
SonicControl: no
Disposal system: Disposal pump
Refill inlet in accordance with DIN 1988: yes
Type of disposal: automatic disposal and cleaning system
Water supply: 2 solenoid valves 1"
Page 1 Subject to technical changes. 26.10.2024
Load-bearing capacity (DIN 19901): F3
General characteristics
Material: PE
Standard: EN 1825
Installation situation: free-standing installation
Delivery state: Installation-ready (electrical components,
connection parts must be connected on site)
Scope of delivery: Storz-B coupling R 2 1/2" for disposal vehicle
connection
Dimensions
Net weight: 220 kg
Gross weight: 250 kg
Set-up area, length: 2147 mm
Set-up area, width: 1108 mm
Set-up area, height: 1892 mm
Required access area, length: 1910 mm
Required access area, width: 940 mm
Required access area, height: 1678 mm
Packaging dimension: length
Packaging dimension: width
Packaging dimension: height
Tank/drain body
Nominal pressure (PN): 10
Pressure pipe connection (DN): 65
Pressure pipe connection (OD): 75 mm
Distance pipe bottom outlet to tank bottom: 1185 mm
Distance pipe bottom inlet to tank bottom: 1255 mm
Outlet nominal size (OD): 160 mm
Outlet nominal size (DN): 150 mm
Inlet nominal size (OD): 160 mm
Inlet nominal size (DN): 150 mm
Connection inlet/outlet sockets: PE-HD pipes in accordance with DIN 19537, HT pipes
in accordance with DIN 19560, PP or AS
Servicing opening: 420 mm
Coverage features
Type of cover: Cover
Cover material: Polymer
Colour of cover: violet
Locking: Quick-release closure
Tightness: odour-tight
Wastewater contents
Separator contents: 650 l
Total volume: 1350 l
Contents of sludge trap: 700 l
Storage quantity of grease: 280 l
Page 2 Subject to technical changes. 26.10.2024
Pumping device
Pump: SPF 300 KE 2.0
Number of pumps: 1
Weight, pump: 44 kg
Connection type: Direct connection
Rated current: 6,2 A
Length of mains cable for pump: 5m
Protection class: I
Insulation class: F
Cos phi - power factor: 0,87
Protection class (pump): IP 55
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed 40 °C
material:
Max. pumping capacity: 60 m³/h
Max. pumping height: 17 m
Speed: 2850 U/min
Power P1: 3,6 kW
Power P2: 3 kW
Operating mode: S2 - 30 min.
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Type of pump connection cable: H07RN-F 7G 1.5 mm²
Impeller type: Radial impeller with macerating system
Control
Control unit: yes
Motor protection switch: yes
Type of fuse required (RCD): 30 mA
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 400 V
Connection type: Direct connection
Potential-free contact: yes
GSM interface: no
USB interface: yes
Log book function: yes
Multi-line display: yes
Battery buffering: no
Self-diagnosis system (SDS): yes
Rated current: 6,2 A
Page 3 Subject to technical changes. 26.10.2024
