ENDURO 3 ™

Owner’s Manual
© 2024 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change
or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin , the Garmin logo, ANT+ , Approach , Auto Lap , Auto Pause , Edge , inReach , Move IQ , QuickFit , TracBack , Virtual Partner , and Xero are trademarks of Garmin Ltd.
® ® ® ® ® ® ® ® ® ® ® ®

or its subsidiaries, registered in the USA and other countries. Enduro™, Body Battery™, Connect IQ™, Firstbeat Analytics™, Garmin AutoShot™, Garmin Connect™, Garmin Explore™,
Garmin Express™, Garmin Golf™, Garmin Messenger™, Garmin Pay™, Health Snapshot™, HRM-Fit™, HRM-Pro™, Index™, NextFork™, PacePro™, Rally™, SatIQ™, tempe™, Varia™, and
Vector™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Android™ is a trademark of Google LLC. Apple , iPhone , and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH word mark and
® ® ® ®

logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. The Cooper Institute , as well as any related trademarks, are the property of
®

The Cooper Institute. Di2™ is a trademark of Shimano, Inc. Shimano is a registered trademark of Shimano, Inc. iOS is a registered trademark of Cisco Systems, Inc. used under
® ®

license by Apple Inc. Iridium is a registered trademark of Iridium Satellite LLC. STRAVA and Strava™ are trademarks of Strava, Inc. Training Stress Score™ (TSS), Intensity Factor™
®

(IF), and Normalized Power™ (NP) are trademarks of Peaksware, LLC. USB-C is a registered trademark of USB Implementers Forum. Wi‑Fi is a registered mark of Wi-Fi Alliance
® ®

Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Zwift™ is a trademark of Zwift, Inc. Other trademarks and trade
®

names are those of their respective owners.

This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
®
 Table of Contents Pairing Your Watch and Trolling
Motor.............................................. 15
Introduction......................................1 Activities................................................ 16
Starting an Activity............................ 17
Getting Started........................................ 1 Tips for Recording Activities.........17
Button Functions..................................... 1 Stopping an Activity.......................... 18
Touchscreen Functions.......................... 3 Evaluating an Activity.................... 18
Enabling and Disabling the Outdoor Activities.............................. 19
Touchscreen........................................ 3
Golfing............................................ 19
Customizing the Watch Face................. 4
Playing Golf................................ 19
Apps and Activities...........................4 Golf Menu................................... 21
Moving the Flag......................... 22
Apps......................................................... 5 Virtual Caddie............................. 22
Workouts.............................................. 7 PlaysLike Distance Icons.......... 23
Starting a Workout........................... 7 Measuring Distance with Touch
Workout Execution Score............ 7 Targeting.................................... 23
Following a Workout From Garmin Viewing Measured Shots.......... 23
Connect............................................ 8 Keeping Score............................ 24
Following a Daily Suggested Viewing the Wind Speed and
Workout............................................ 8 Direction..................................... 25
Starting an Interval Workout........... 9 Viewing the Direction to the
Customizing an Interval Pin............................................... 25
Workout........................................ 9 Saving Custom Targets............. 25
Recording a Critical Swim Speed Big Numbers Mode.................... 26
Test................................................. 10
Swing Tempo Training.............. 26
Using Virtual Partner®.................. 10
Recording a Bouldering Activity... 28
Setting a Training Target........... 11
Starting an Expedition................... 28
Racing a Previous Activity......... 11
Recording a Track Point
About the Training Calendar......... 11 Manually..................................... 28
Using Garmin Connect Training Viewing Track Points................. 29
Plans........................................... 12
Going Fishing................................. 29
Using the Saved App......................... 12
Going Hunting................................ 29
Garmin Pay........................................ 12
Running.............................................. 30
Setting Up Your Garmin Pay
Going for a Track Run................... 30
Wallet............................................. 12
Tips for Recording a Track
Paying for a Purchase Using Your
Run.............................................. 30
Watch............................................. 13
Going for a Virtual Run.................. 30
Adding a Card to Your Garmin Pay
Wallet............................................. 13 Calibrating the Treadmill
Distance......................................... 30
Managing Your Garmin Pay
Cards.......................................... 13 Recording an Ultra Run Activity.... 31
Changing Your Garmin Pay Ultra Run Auto Rest Settings..... 31
Passcode....................................... 13 Recording an Obstacle Racing
Viewing Tide Information..................14 Activity............................................ 31
Setting a Tide Alert........................ 14 PacePro™ Training......................... 31
Marking Your Anchor Location......... 15 Downloading a PacePro Plan
from Garmin Connect................ 32
Anchor Settings............................. 15
Creating a PacePro Plan on Your
Trolling Motor Remote...................... 15
Watch......................................... 32

Table of Contents i
 Starting a PacePro Plan............ 33 Segments....................................... 49
Swimming.......................................... 34 Strava™ Segments..................... 50
Swim Terminology......................... 34 Viewing Segment Details.......... 50
Stroke Types.................................. 34 Racing a Segment...................... 50
Tips for Swimming Activities........ 34
Swim Auto Rest and Manual Controls......................................... 51
Rest................................................ 35 Customizing the Controls Menu.......... 54
Training with the Drill Log............. 35 Using the LED Flashlight....................... 54
Cycling............................................... 35 Editing the Custom Flashlight
Using an Indoor Trainer................. 35 Strobe................................................. 55
Power Guide................................... 36
Creating and Using a Power Glances.......................................... 55
Guide.......................................... 36 Viewing Glances.................................... 58
Multisport........................................... 36 Customizing the Glances List.............. 59
Triathlon Training.......................... 37 Creating a Glances Folder................ 59
Creating a Multisport Activity....... 37 Body Battery.......................................... 59
Gym Activities.................................... 37 Tips for Improved Body Battery
Recording a Strength Training Data.................................................... 59
Activity............................................ 38 Performance Measurements............... 60
Recording a HIIT Activity............... 39 About VO2 Max. Estimates............... 61
Recording an Indoor Climbing Getting Your VO2 Max. Estimate for
Activity............................................ 39 Running.......................................... 61
Winter Sports..................................... 40 Getting Your VO2 Max. Estimate for
Viewing Your Ski Runs.................. 40 Cycling............................................ 61
Recording a Backcountry Skiing or Viewing Your Predicted Race
Snowboarding Activity.................. 40 Times................................................. 62
Cross-Country Skiing Power Heart Rate Variability Status............ 62
Data................................................ 40 Performance Condition..................... 62
Water Sports...................................... 41 Viewing Your Performance
Viewing Your Water Sport Runs....41 Condition........................................ 63
Sailing............................................. 41 Getting Your FTP Estimate............... 63
Tack Assist.................................41 Conducting an FTP Test............... 64
Customizing Activities and Apps......... 42 Lactate Threshold............................. 64
Customizing the App List..................43 Performing a Guided Test to
Customizing Your Favorite Activities Determine Your Lactate
List...................................................... 43 Threshold....................................... 65
Pinning a Favorite Activity to the Viewing Your Real-Time Stamina..... 66
List.................................................. 43 Viewing Your Power Curve............... 66
Customizing the Data Screens......... 44 Training Status...................................... 67
Adding a Map to an Activity.......... 44 Training Status Levels.......................67
Creating a Custom Activity............... 44 Tips for Getting Your Training
Activity Settings................................. 45 Status............................................. 68
Activity Alerts................................. 47 Acute Load......................................... 68
Setting an Alert.......................... 48 Training Load Focus...................... 68
Routing Settings............................ 48 Load Ratio...................................... 68
Using ClimbPro.............................. 48 About Training Effect.................... 69
Enabling Auto Climb...................... 49 Recovery Time................................... 70
Satellite Settings............................ 49 Recovery Heart Rate...................... 70

ii Table of Contents
 Heat and Altitude Performance Display and Brightness Settings..... 82
Acclimation........................................ 70
Pausing and Resuming Your Training Connectivity................................... 83
Status................................................. 70 Sensors and Accessories..................... 83
Training Readiness............................... 71 Wireless Sensors............................... 83
Endurance Score................................... 71 Pairing Your Wireless Sensors..... 85
Hill Score................................................72 Heart Rate Accessory Running Pace
Viewing Cycling Ability.......................... 72 and Distance.................................. 85
Race Calendar and Primary Race......... 72 Tips for Recording Running Pace
Training for a Race Event.................. 73 and Distance.............................. 85
Adding a Stock...................................... 73 Running Dynamics......................... 86
Adding Weather Locations................... 73 Tips for Missing Running
Using the Jet Lag Adviser..................... 74 Dynamics Data........................... 86
Planning a Trip in the Garmin Connect Running Power........................... 86
App..................................................... 74 Using the Varia Camera
Controls.......................................... 87
Clocks............................................ 74 inReach Remote............................ 87
Setting an Alarm.................................... 74 Using the inReach Remote........ 87
Editing an Alarm................................ 75 Xero Laser Location Settings....... 88
Using the Countdown Timer................. 75 Phone Connectivity Features............... 88
Deleting a Countdown Timer............ 76 Pairing Your Phone............................88
Using the Stopwatch............................. 76 Enabling Phone Notifications........... 88
Adding Alternate Time Zones.............. 77 Viewing Notifications.................... 89
Editing an Alternate Time Zone........ 77 Receiving an Incoming Phone
Adding a Countdown Event.................. 78 Call.................................................. 89
Editing a Countdown Event............... 78 Replying to a Text Message.......... 89
Managing Notifications.................89
History........................................... 78 Turning Off the Bluetooth Phone
Using History......................................... 79 Connection......................................... 90
Multisport History..............................79 Turning On and Off Find My Phone
Personal Records.................................. 79 Alerts.................................................. 90
Viewing Your Personal Records....... 79 Locating a Phone Lost During a GPS
Restoring a Personal Record............ 79 Activity............................................ 90
Clearing Personal Records............... 80 Wi‑Fi Connectivity Features.................. 90
Viewing Data Totals.............................. 80 Connecting to a Wi‑Fi Network......... 90
Garmin Share......................................... 91
Notifications and Alerts Settings.... 80 Sharing Data with Garmin Share...... 91
Health and Wellness Alerts.................. 81 Receiving Data with Garmin Share... 91
Setting an Abnormal Heart Rate Phone Apps and Computer
Alert.................................................... 81 Applications........................................... 91
Morning Report..................................... 81 Garmin Connect.................................92
Customizing Your Morning Report... 81 Using the Garmin Connect App.... 92
Setting Time Alerts............................... 82 Updating the Software Using the
Setting a Storm Alert............................. 82 Garmin Connect App................. 92
Turning On Phone Connection Alerts.. 82 Unified Training Status.............. 93
Using Garmin Connect on Your
Sound and Vibration Settings......... 82 Computer....................................... 93

Table of Contents iii

 Updating the Software Using Downloading TopoActive Maps. 104
Garmin Express.......................... 93 Deleting Maps.............................. 104
Manually Syncing Data with Garmin Showing and Hiding Map Data........... 105
Connect.......................................... 93
Connect IQ Features......................... 94 Navigation.................................... 105
Downloading Connect IQ Navigating to a Destination................ 105
Features......................................... 94 Navigating to a Nearby Point of
Downloading Connect IQ Features Interest............................................. 106
Using Your Computer.................... 94 Navigating to Your Starting Point
Garmin Explore™................................ 94 During an Activity............................ 106
Garmin Messenger App.................... 95 Marking and Starting Navigation to a
Using the Messenger Feature....... 95 Man Overboard Location................ 107
Garmin Golf App................................ 96 Stopping Navigation........................107
Saving Locations................................. 107
Focus Modes.................................. 96 Saving Your Location...................... 107
Customizing the Sleep Focus Mode.... 96 Saving a Dual Grid Location........... 107
Customizing the Activity Focus Sharing a Location From a Map Using
Mode...................................................... 96 the Garmin Connect App................ 108
Playing Voice Alerts During an Starting a GPS Activity From a
Activity............................................... 97 Shared Location.......................... 108
Navigating to a Shared Location
Health and Wellness Settings......... 97 During an Activity........................ 108
Wrist Heart Rate.................................... 97 Courses................................................ 108
Wearing the Watch............................ 98 Creating and Following a Course on
Tips for Erratic Heart Rate Data....... 98 Your Device...................................... 109
Wrist Heart Rate Monitor Settings... 98 Creating a Round-Trip Course.... 109
Broadcasting Heart Rate Data...... 99 Navigating with Sight 'N Go........ 110
Pulse Oximeter...................................... 99 Creating a Course on Garmin
Getting Pulse Oximeter Readings.. 100 Connect............................................ 110
Setting the Pulse Oximeter Mode.. 100 Sending a Course to Your
Tips for Erratic Pulse Oximeter Device........................................... 110
Data.................................................. 100 Projecting a Waypoint......................... 111
Auto Goal............................................. 101
Using the Move Alert.......................... 101 Safety and Tracking Features....... 111
Intensity Minutes.................................101 Adding Emergency Contacts.............. 111
Earning Intensity Minutes............... 101 Adding Contacts................................. 112
Sleep Tracking.....................................101 Turning Incident Detection On and
Using Automated Sleep Tracking...101 Off........................................................ 112
Requesting Assistance....................... 112
Map.............................................. 102 Starting a GroupTrack Session.......... 113
Viewing the Map................................. 102 Tips for GroupTrack Sessions........ 113
Saving or Navigating to a Location on
the Map................................................ 102 Music........................................... 113
Map Settings....................................... 103 Connecting to a Third-Party Provider 114
Managing Maps.............................. 103 Downloading Audio Content from a
Downloading Maps with Outdoor Third-Party Provider........................ 114
Maps+.......................................... 104 Downloading Personal Audio
Content................................................ 114

iv Table of Contents
 Listening to Music.............................. 115 Device Information....................... 124
Music Playback Controls.................... 115 Charging the Watch............................ 124
Connecting Bluetooth Headphones... 115 Solar Charging................................. 124
Changing the Audio Mode.................. 115 Tips for Solar Charging............... 125
Specifications......................................125
User Profile.................................. 116 Battery Information......................... 125
Setting Up Your User Profile............... 116 Device Care......................................... 126
Gender Settings............................... 116 Cleaning the Watch......................... 126
Viewing Your Fitness Age................... 116 Cleaning the Nylon Strap................ 126
About Heart Rate Zones..................... 116 Changing the UltraFit 2 Nylon Strap.. 127
Fitness Goals................................... 116 Changing the QuickFit® Bands.......... 128
Setting Your Heart Rate Zones....... 117
Letting the Watch Set Your Heart Rate Troubleshooting........................... 128
Zones............................................... 117 Product Updates................................. 128
Heart Rate Zone Calculations........ 118 Getting More Information................... 128
Setting Your Power Zones.................. 118 My device is in the wrong language...129
Detecting Performance Measurements Tips for Maximizing the Battery Life.. 129
Automatically...................................... 118
Restarting Your Watch........................ 129
Is my phone compatible with my
Power Manager Settings.............. 119
watch?................................................. 129
Customizing the Battery Saver My phone will not connect to the
Feature................................................. 119 watch................................................... 130
Customizing the Power Mode for an Can I use my Bluetooth sensor with my
Activity................................................. 119 watch?................................................. 130
Customizing Power Modes................ 120 My headphones will not connect to the
watch................................................... 130
System Settings........................... 120 My music cuts out or my headphones
Customizing the Button Shortcuts..... 120 won't stay connected.......................... 130
Compass............................................. 120 How can I undo a lap button press?.. 131
Setting the Compass Heading....... 121 Acquiring Satellite Signals.................. 131
Compass Settings........................... 121 Improving GPS Satellite Reception 131
Calibrating the Compass The heart rate on my watch is not
Manually....................................... 121 accurate............................................... 131
Setting the North Reference....... 121 The activity temperature reading is not
Altimeter and Barometer.................... 121 accurate............................................... 131
Altimeter and Barometer Settings. 122 Exiting Demo Mode............................. 131
Calibrating the Barometric Activity Tracking................................. 131
Altimeter...................................... 122 My step count does not seem
Time Settings...................................... 122 accurate........................................... 132
Syncing the Time............................. 122 The step counts on my watch and my
Advanced System Settings................ 123 Garmin Connect account don't
Changing the Units of Measure...... 123 match............................................... 132
Resetting All Default Settings............ 123 The floors climbed amount does not
Viewing Device Information............... 123 seem accurate................................. 132
Viewing E-label Regulatory and
Compliance Information................. 124 Appendix...................................... 133
Data Fields........................................... 133

Table of Contents v
 Color Gauges and Running Dynamics
Data...................................................... 147
Ground Contact Time Balance
Data.................................................. 147
Vertical Oscillation and Vertical Ratio
Data.................................................. 148
VO2 Max. Standard Ratings............... 148
FTP Ratings......................................... 149
Endurance Score Ratings................... 150
Wheel Size and Circumference.......... 151

vi Table of Contents
 Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Always consult your physician before you begin or modify any exercise program.

Getting Started
When using your watch the first time, you should complete these tasks to set it up and get to know the basic
features.

1 Hold to turn on the watch (Button Functions, page 1).

2 Follow the on-screen instructions to complete the initial setup.
During the initial setup, you can pair your phone with your watch to receive notifications, sync your activities,
and more (Pairing Your Phone, page 88). If you are upgrading from a compatible watch, you can migrate
your watch settings, saved courses, and more when you pair your new Enduro watch with your phone.
3 Charge the watch (Charging the Watch, page 124).
4 Start an activity (Starting an Activity, page 17).

Button Functions

Introduction 1
 • Press to illuminate the screen.
• Quickly press twice to turn the flashlight on or off (Using the LED Flashlight, page 54).
• Hold for three seconds to turn on the device.
• Hold for two seconds to view the controls menu (Controls, page 51).
Upper-left button • Hold for five seconds to request assistance (Requesting Assistance, page 112).

• From the watch face, press to view the notification center (Viewing Notifications,
page 89).
• Press to scroll through the menus or data screens.
• From the watch face, hold to access the main menu.
Middle-left button • Hold to access a contextual menu, if one is available in that part of the user interface.

• From the watch face, press to scroll through the glances list (Viewing Glances,
page 58).
• Press to scroll through the menus or data screens.
Lower-left button • Hold to view the music controls (Listening to Music, page 115).

• Press to choose an option in a menu.

• From the watch face, press to open the apps and activities menu (Apps and Activities,
page 4).
Upper-right button • Press to start or stop an activity (Starting an Activity, page 17).

• Press to return to the previous screen.

• During an activity, press to record a lap, rest, or advance to the next workout step.
• Hold to view a list of your recently used apps.
Lower-right button

2 Introduction
Touchscreen Functions

• Tap to choose an option in a menu.

• Hold to view the menu.
• Hold the watch face data to open the glance or feature.
NOTE: This feature is not available on all watch faces.
• From the watch face, swipe down to view the notification center.
• From the watch face, swipe up to scroll through the glances list.
• Swipe up or down to scroll through the menus.
• Swipe right to return to the previous screen.
• Cover the screen with your palm to return to the watch face and turn down the screen brightness.

Enabling and Disabling the Touchscreen

• Hold and .

• Hold , and select .

• Hold , select Watch Settings > Display & Brightness > Touch, and select an option.

Introduction 3
Customizing the Watch Face
You can customize the watch face information and appearance, or activate an installed Connect IQ™ watch face
(Connect IQ Features, page 94).

1 From the watch face, hold .

2 Select Watch Face.

3 Press or to preview the watch face options.

4 Select Add New to create a custom digital or analog watch face.

5 Scroll to a watch face, press , and select .

6 Select an option:
NOTE: Not all options are available for all watch faces.
• To activate the watch face, select Apply.
• To change the style of the watch face to digital or analog, select Styles.
• To change the data that appears on the watch face, select Data.
• To add or change an accent color for the watch face, select Accent Color.
• To change the color of the data that appears on the watch face, select Data Color.
• To remove the watch face, select Delete.

Apps and Activities

Your watch includes a variety of preloaded apps and activities.
Apps: Apps provide interactive features for your watch, such as viewing saved locations or checking the
weather forecast (Apps, page 5).
Activities: Your watch comes preloaded with indoor and outdoor activity apps, including running, cycling,
strength training, golfing, and more (Activities, page 16). When you start an activity, the watch displays and
records sensor data, which you can save and share with the Garmin Connect™ community.
For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.
Connect IQ Apps: You can add features to your watch by installing apps from the Connect IQ app (Connect IQ
Features, page 94).

4 Apps and Activities

Apps
You can customize your watch using the apps menu, which lets you quickly access watch features and options.
Some apps require a Bluetooth connection to a compatible phone. Many apps can also be found in the glances
®

(Glances, page 55) or controls (Controls, page 51).

From the watch face, press , and press to scroll through the apps.

Apps and Activities 5

Name More Information

ABC Select to view combined altimeter, barometer, and compass information.

Anchor Select to mark an anchor location (Marking Your Anchor Location, page 15).

Broadcast Heart Select to broadcast heart rate data to a paired device (Broadcasting Heart Rate Data,
Rate page 99).

Calendar Select to view upcoming events from your phone calendar.

Select to set an alarm, timer, stopwatch, alternate time zone, or countdown event (Clocks,
Clocks
page 74).

Select to display predictions for the best days and times for fishing based on your
Fish Forecast location, the moon's position, and the moon rise and set times. You can view the rating
for the day and major and minor feeding times.

Garmin Share Select to send or receive data with other Garmin devices (Garmin Share, page 91).
®

Select to record several key health metrics, such as your average heart rate, stress level,
Health Snapshot™ and respiration rate, while you hold still for two minutes. It provides a glimpse of your
overall cardiovascular status.

History Select to view your recorded activity history, records, and totals (Using History, page 79).

Map Select to view the map (Viewing the Map, page 102).

Map Manager Select to view and manage downloaded maps (Managing Maps, page 103).

Select to view and send messages from the Garmin Messenger™ phone app (Garmin
Messenger
Messenger App, page 95).

Select to view the moonrise and moonset times, along with the moon phase, based on
Moon Phase
your GPS position.

Music Select to control audio playback using your watch (Listening to Music, page 115).

Notifications Select to view your phone notifications (Viewing Notifications, page 89).

Select to save a new location by projecting the distance and bearing from your current
Project Wpt.
location (Projecting a Waypoint, page 111).

Pulse Ox Select to take a pulse oximeter reading (Pulse Oximeter, page 99).

Select to view your saved locations, courses, and waypoints (Using the Saved App,
Saved
page 12).

Settings Select to open the settings menu.

Sunrise & Sunset Select to view sunrise, sunset, and twilight times.

Tides Select to view tide information for a location (Viewing Tide Information, page 14).

Wallet Select to open your Garmin Pay™ wallet (Garmin Pay, page 12).

Weather Select to view the current weather forecast and conditions.

Workouts Select to view your saved workouts (Workouts, page 7).

6 Apps and Activities

Workouts
You can create custom workouts that include goals for each workout step and for varied distances, times, and
calories. During your activity, you can view workout-specific data screens that contain workout step information,
such as the workout step distance or current pace.
On your watch: You can open the workouts app from the activity list to show all workouts currently loaded on
your watch (Apps and Activities, page 4).
You can also view your workout history.
On the app: You can create and find more workouts, or select a training plan that has built-in workouts and
transfer them to your watch (Following a Workout From Garmin Connect, page 8).
You can schedule workouts.
You can update and edit your current workouts.
Starting a Workout
Your device can guide you through multiple steps in a workout.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press , and select Training.

4 Select an option:
• To start an interval workout or a workout with a training target, select Quick Workout (Starting an Interval
Workout, page 9, Setting a Training Target, page 11).
• To start a preloaded or saved workout, select Workout Library (Following a Workout From Garmin Connect,
page 8).
• To start a scheduled workout from your Garmin Connect training calendar, select Training Calendar
(About the Training Calendar, page 11).
NOTE: Not all options are available for all activity types.
5 Select a workout.
NOTE: Only workouts that are compatible with the selected activity appear in the list.
6 If necessary, select Do Workout.

7 Press to start the activity timer.

After you begin a workout, the device displays each step of the workout, step notes (optional), the target
(optional), and the current workout data. For strength, yoga, cardio, or Pilates activities, an instructional
animation appears.
Workout Execution Score
After you complete a workout, the watch displays your workout execution score based on how accurately you
completed the workout. For example, if your 60 minute workout has a target pace range, and you stay in that
range for 50 minutes, your workout execution score is 83%.

Good, 67 to 100%

Average, 34 to 66%

Low, 0 to 33%

Apps and Activities 7

Following a Workout From Garmin Connect
Before you can download a workout from Garmin Connect, you must have a Garmin Connect account (Garmin
Connect, page 92).
1 Select an option:
• Open the Garmin Connect app, and select .
• Go to connect.garmin.com.
2 Select Training & Planning > Workouts.
3 Find a workout, or create and save a new workout.
4 Select or Send to Device.
5 Follow the on-screen instructions.
Following a Daily Suggested Workout
Before the watch can suggest a daily run or bike workout, you must have a VO2 max. estimate for that activity
(About VO2 Max. Estimates, page 61).

1 From the watch face, press .

2 Select Activities.
3 Select an option:
• Select Running, and select an activity.
• Select Cycling, and select an activity.

4 Press , and select the daily suggested workout.

5 Press , and select an option:

• To do the workout, select Do Workout.
• To discard the workout, select Dismiss.
• To preview the workout steps, select Steps.
• To view workout suggestions for the upcoming week, select More Suggestions.
• To view the workout settings, such as Target Type, select Settings.
The suggested workout updates automatically to changes in training habits, recovery time, and VO2 max.

8 Apps and Activities

Starting an Interval Workout
1 From the watch face, press .
2 Select Activities, and select an activity.

3 Press .
4 Select Training > Quick Workout > Intervals.
Select an option:
5
• Select Open Repeats to mark your intervals and rest periods manually by pressing .

• Select Structured Repeats, press , and select Do Workout to use an interval workout based on
distance or time.
6 If necessary, select to include a warm up before the workout.

7 Press to start the activity timer.

8 When your interval workout has a warm up, press to begin the first interval.
9 Follow the on-screen instructions.

10 At any time, press to stop the current interval or rest period and transition to the next interval or rest
period (optional).
After you complete all of the intervals, a message appears.
Customizing an Interval Workout
1 From the watch face, press .
2 Select Activities, and select an activity.

3 Press .
4 Select Training > Quick Workout > Intervals > Structured Repeats.

5 Press , and select Edit Workout.

6 Select one or more options:
• To set the interval duration and type, select Interval.
• To set the rest duration and type, select Rest.
• To set the number of repetitions, select Repeat.
• To add an open-ended warm up to your workout, select Warm Up > On.

7 Press .
The watch saves your custom interval workout until you edit the workout again.

Apps and Activities 9

Recording a Critical Swim Speed Test
Your Critical Swim Speed (CSS) value is the result of a time-trial-based test expressed as a pace per 100 meters.
Your CSS is the theoretical speed you can maintain continuously without exhaustion. You can use your CSS to
guide your training pace and monitor your improvement.

1 From the watch face, press .

2 Select Activities > Swimming > Pool Swim.

3 Press .
4 Select Training > Workout Library > Critical Swim Speed > Do Critical Swim Speed Test.

5 Press to preview the workout steps (optional).

6 Press .

7 Press to start the activity timer.

8 Follow the on-screen instructions.
Using Virtual Partner
®

The Virtual Partner feature is a training tool designed to help you meet your goals. You can set a pace for the
Virtual Partner feature and race against it.
NOTE: This feature is not available for all activities.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press .
4 Select Activity Options > Data Screens > Add New > Virtual Partner.
5 Enter a pace or speed value.

6 Press or to change the location of the Virtual Partner screen (optional).

7 Start your activity (Starting an Activity, page 17).

8 Press or to scroll to the Virtual Partner screen and see who is leading.

10 Apps and Activities

Setting a Training Target
The training target feature works with the Virtual Partner feature so you can train toward a set distance,
distance and time, distance and pace, or distance and speed goal. During your training activity, the watch gives
you real-time feedback about how close you are to achieving your training target.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press , and select Training.

4 Select an option:
• Select Set a Target.
• Select Quick Workout.
NOTE: Not all options are available for all activity types.
5 Select an option:
• Select Distance Only to select a preset distance or enter a custom distance.
• Select Distance and Time to select a distance and time target.
• Select Distance and Pace or Distance and Speed to select a distance and pace or speed target.
The training target screen appears and displays your estimated finish time.

6 Press to start the activity timer.

TIP: You can hold , and select Cancel Target to cancel the training target.

Racing a Previous Activity

You can race a previously recorded or downloaded activity. This feature works with the Virtual Partner feature
so you can see how far ahead or behind you are during the activity.
NOTE: This feature is not available for all activities.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press .
4 Select Training > Race Yourself.
5 Select an option:
• Select From History to select a previously recorded activity from your device.
• Select Downloaded to select an activity you downloaded from your Garmin Connect account.
6 Select the activity.
The Virtual Partner screen appears indicating your estimated finish time.

7 Press to start the activity timer.

8 After you complete your activity, press , and select Save.

About the Training Calendar

The training calendar on your watch is an extension of the training calendar or schedule you set up in your
Garmin Connect account. After you have added a few workouts to the Garmin Connect calendar, you can send
them to your device. All scheduled workouts sent to the device appear in the calendar glance. When you select
a day in the calendar, you can view or do the workout. The scheduled workout stays on your watch whether
you complete it or skip it. When you send scheduled workouts from Garmin Connect, they overwrite the existing
training calendar.

Apps and Activities 11

Using Garmin Connect Training Plans
Before you can download and use a training plan, you must have a Garmin Connect account (Garmin Connect,
page 92), and you must pair the Enduro watch with a compatible phone.
1 From the Garmin Connect app, select .
2 Select Training & Planning > Training Plans.
3 Select and schedule a training plan.
4 Follow the on-screen instructions.
5 Review the training plan in your calendar.
Adaptive Training Plans
Your Garmin Connect account has an adaptive training plan and Garmin coach to fit your training goals. For
example, you can answer a few questions and find a plan to help you complete a 5 km race. The plan adjusts
to your current level of fitness, coaching and schedule preferences, and race date. When you start a plan, the
Garmin coach glance is added to the glances list on your Enduro watch.

Using the Saved App

You can use the saved app to view your saved locations and courses.

1 From the watch face, press .

2 Select Saved.
3 Select a saved item.
4 Select an option:
• To navigate to the location, select Go To.
• To navigate the course, select Do Course.
• To navigate the course in reverse, select More > Do Course in Reverse.
• To view location details, select More > Details.
• To edit the location or course details, select More > Edit.
• To view a list of ascents in the course, select More > View Climbs.
• To show the course on the map, even when you are not navigating, select More > Show on Map.
• To share the location or course with the Garmin Share feature, select More > Share (Garmin Share,
page 91).
• To delete the location or course, select More > Delete.

Garmin Pay
The Garmin Pay feature allows you to use your watch to pay for purchases in participating locations using credit
or debit cards from a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit cards to your Garmin Pay wallet. Go to garmin.com
/garminpay/banks to find participating financial institutions.
1 From the Garmin Connect app, select .
2 Select Garmin Pay > Get Started.
3 Follow the on-screen instructions.

12 Apps and Activities

Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases, you must set up at least one payment card.
You can use your watch to pay for purchases in a participating location.

1 Hold .
2 Select .
3 Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times, your wallet locks, and you must reset your
passcode in the Garmin Connect app.
Your most recently used payment card appears.
4 If you have added multiple cards to your Garmin Pay wallet, swipe to change to another card (optional).

5 If you have added multiple cards to your Garmin Pay wallet, select to change to another card (optional).
6 Within 60 seconds, hold your watch near the payment reader, with the watch facing the reader.
The watch vibrates and displays a check mark when it is finished communicating with the reader.
7 If necessary, follow the instructions on the card reader to complete the transaction.
TIP: After you successfully enter your passcode, you can make payments without a passcode for 24 hours while
you continue to wear your watch. If you remove the watch from your wrist or disable heart rate monitoring, you
must enter the passcode again before making a payment.
Adding a Card to Your Garmin Pay Wallet
You can add up to 10 credit or debit cards to your Garmin Pay wallet.
1 From the Garmin Connect app, select .
2 Select Garmin Pay > > Add Card.
3 Follow the on-screen instructions.
After the card is added, you can select the card on your watch when you make a payment.
Managing Your Garmin Pay Cards
You can temporarily suspend or delete a card.
NOTE: In some countries, participating financial institutions may restrict the Garmin Pay features.
1 From the Garmin Connect app, select .
2 Select Garmin Pay.
3 Select a card.
4 Select an option:
• To temporarily suspend or unsuspend the card, select Suspend Card.
The card must be active to make purchases using your Enduro watch.
• To delete the card, select .
Changing Your Garmin Pay Passcode
You must know your current passcode to change it. If you forget your passcode, you must reset the Garmin Pay
feature for your Enduro watch, create a new passcode, and reenter your card information.
1 From the Garmin Connect app, select .
2 Select Garmin Pay > Change Passcode.
3 Follow the on-screen instructions.
The next time you pay using your Enduro watch, you must enter the new passcode.

Apps and Activities 13

Viewing Tide Information
WARNING
Tide information is for information purposes only. It is your responsibility to heed all posted water-related
guidance, to remain aware of your surroundings, and to use safe judgment in, on, and around the water at all
times. Failure to heed this warning could result in serious personal injury or death.
You can view information about a tide station, including the tide height and when the next high and low tides will
occur. You can save up to ten tide stations.

1 From the watch face, press .

2 Select Tides.
3 Select an option:
• To use your current location when you are near a tide station, select Add > Current Location.
• To select a location on the map, select Add > Use Map.
• To enter the name of a city, select Add > City Search.
• To select a saved location, select Add > Saved Locations.
• To enter coordinates for a location, select Add > Coordinates.
A 24-hour tide chart appears for the current date with the current tide height and information about the
next high and low tides .

4 Press to see tide information for upcoming days.

5 Press , and select Set as Favorite to set this location as your favorite tide station.
Your favorite tide station appears at the top of the list in the app and in the glance.
Setting a Tide Alert
1 From the Tides app, select a saved tide station.

2 Press , and select Set Alerts.

3 Select an option:
• To set an alarm to sound before the peak tide, select Til High Tide.
• To set an alarm to sound before the low tide, select Til Low Tide.

14 Apps and Activities

Marking Your Anchor Location
WARNING
The anchor feature is a tool for situational awareness only and may not prevent groundings or collisions in all
circumstances. You are responsible for the safe and prudent operation of your vessel, for remaining aware of
your surroundings, and for using safe judgment on the water at all times. Failure to heed this warning could
result in property damage, serious personal injury, or death.

1 From the watch face, press .

2 Select Anchor.
3 Wait while the watch locates satellites.

4 Press , and select Drop Anchor.

Anchor Settings
From the watch face, press , select Anchor, hold , and select the app settings.
Drift Radius: Sets the allowable drift distance while anchored.
Update Interval: Sets the time interval for updating anchor data.
Anchor Alarm: Enables an alarm for when the boat moves beyond the drift radius.
Anchor Alarm Duration: Sets the anchor alarm duration. When the anchor alarm is enabled, an alert appears
each time the boat moves beyond the drift radius during the specified alarm duration.

Trolling Motor Remote

Pairing Your Watch and Trolling Motor
You can pair your watch with a Garmin trolling motor and use it as a remote control. For more information about
using a remote control, see your trolling motor owner's manual.
1 Turn on the trolling motor.
2 Bring the watch within 1 m (3 ft.) of the display panel on the trolling motor.

3 On the watch, press , and select Trolling Motor.

TIP: If necessary, you can pair your watch with another trolling motor (Pairing Your Wireless Sensors,
page 85).
4 On the trolling motor display panel, press three times to enter pairing mode.
on the trolling motor display panel illuminates blue as it searches for a connection.

5 On the watch, press to enter pairing mode.

6 Verify that the passkey shown on your trolling motor remote control matches your watch.

7 On the watch, press to confirm the passkey.

8 On the trolling motor remote control, press to confirm the passkey.
on the trolling motor display panel illuminates green when the connection to your watch is successful.

Apps and Activities 15

Activities
From the watch face, press , select Activities, and press to scroll through the activities. Your favorite
activities list appears at the top of the list (Customizing Your Favorite Activities List, page 43).
NOTE: Some activities appear in more than one category.

Category Activities

Archery, Bouldering, Disc Golf, Expedition, Fish, Golf, Hike, Horseback, Hunt, Inline Skating,
Outdoor
Mountaineering, Walk

Running Indoor Track, Run, Track Run, Trail Run, Treadmill, Obstacle Racing, Ultra Run, Virtual Run

Bike, Bike Commute, Bike Indoor, Bike Tour, BMX, Cyclocross, eBike, eMTB, Gravel Bike, MTB,
Cycling
Road Bike

Swimming Open Water, Pool Swim, Swimrun, Triathlon

Boxing, Cardio, Climb Indoor, Elliptical, Floor Climb, HIIT, Jump Rope, Mixed Martial Arts,
Gym
Pilates, Row Indoor, Stair Stepper, Strength, Walk Indoor, Yoga

Backcountry Ski, Backcountry Snowboard, Ice Skating, Ski, Snowboard, Snowmobile,

Winter Sports
Snowshoe, XC Classic Ski, XC Skate Ski

Boat, Kayak, Kiteboard, Row, Sail, SUP, Surf, Tube, Wakeboard, Wakesurf, Water Ski, Whitewater,
Water Sports
Windsurf

American Football, Baseball, Basketball, Cricket, Field Hockey, Ice Hockey, Lacrosse, Rugby,
Team Sports
Soccer/Football, Softball, Volleyball, Ultimate Disc

Racket Sports Badminton, Padel, Pickleball, Platform Tennis, Racquetball, Squash, Table Tennis, Tennis

Motorsports ATV, Motocross, Motorcycle, Overland

Other Breathwork, Tempo Training, Track Me

16 Apps and Activities

Starting an Activity
When you start an activity, GPS turns on automatically (if required).

1 From the watch face, press .

2 Select Activities.
3 Select an option:
• Select an activity from your favorites.
• Scroll to the More activities list, select an activity category, and select an activity.
4 If the activity requires GPS signals, go outside to an area with a clear view of the sky, and wait until the GPS
status bar is filled.
The watch is ready after it establishes your heart rate, acquires GPS signals (if required), and connects to
your wireless sensors (if required).

5 Press to start the activity timer.

The watch records activity data only while the activity timer is running.
Tips for Recording Activities
• Charge the watch before starting an activity (Charging the Watch, page 124).

• Press to record laps, start a new set or pose, or advance to the next workout step.
You can select to discard a lap for certain activities (How can I undo a lap button press?, page 131).

• Press or to view additional data screens.

• Swipe up or down to view additional data screens.
TIP: You can swipe down from the top of the screen to unlock the touchscreen during an activity.
• Swipe right or left to view the music controls or activity settings.

• During an activity, hold , and select Change Sport to transition to a different activity type.
When your activity includes two or more sports, it is recorded as a multisport activity.

• Hold , and select Activity Options > Power Mode to use a power mode to extend battery life (Customizing
Power Modes, page 120).

Apps and Activities 17

Stopping an Activity
1 Press .
Select an option:
2
• To resume your activity, select Resume.

• To save the activity and view the details, select Save, press , and select an option.
NOTE: After you save the activity, you can enter self-evaluation data (Evaluating an Activity, page 18).
• To suspend your activity and resume it at a later time, select Resume Later.
• To mark a lap, select Lap.
You can select to discard a lap for certain activities (How can I undo a lap button press?, page 131).
• To navigate back to the starting point of your activity along the path you traveled, select Back to Start >
TracBack.
NOTE: This feature is available only for activities that use GPS.
• To navigate back to the starting point of your activity by the most direct path, select Back to Start > Route.
NOTE: This feature is available only for activities that use GPS.
• To measure the difference between your heart rate at the end of the activity and your heart rate two
minutes later, select Recovery Heart Rate, and wait while the timer counts down (Recovery Heart Rate,
page 70).
• To discard the activity, select Discard.
NOTE: After stopping the activity, the watch saves it automatically after 30 minutes.
Evaluating an Activity
NOTE: This feature is not available for all activities.
You can customize the self-evaluation setting for certain activities (Activity Settings, page 45).
1 After you complete an activity, select Save (Stopping an Activity, page 18).
2 Select a number that corresponds with your perceived effort.
NOTE: You can select to skip the self evaluation.
3 Select how you felt during the activity.
You can view evaluations in the Garmin Connect app.

18 Apps and Activities

Outdoor Activities
Golfing
Playing Golf
Before you play golf, you should charge the watch (Charging the Watch, page 124).

1 From the watch face, press .

2 Select Activities > Outdoor > Golf.
The device locates satellites, calculates your location, and selects a course if there is only one course
nearby.
3 If the course list appears, select a course from the list.
4 If necessary, set your driver distance.
5 Select to keep score.

Apps and Activities 19

6 Select a tee box.
The hole information screen appears.

Current hole number

Par for the hole

Map of the hole

Driver distance from the tee box

Distances to the front, middle, and back of the green

NOTE: Because pin locations change, the watch calculates the distance to the front, middle, and back of the
green, but not the actual pin location.
Select an option:
7
• Tap the front, middle, or back distances to the green to view the PlaysLike distance (PlaysLike Distance
Icons, page 23).

• Press or to view additional data, including your handicap rating and the PlaysLike factors.
• Tap the map to view more detail or measure distance with touch targeting (Measuring Distance with
Touch Targeting, page 23).

• Tap the map and press or to view the location and distance to a layup or to the front and back of
a hazard.

• Press to open the golf menu (Golf Menu, page 21).

When you move to the next hole, the watch automatically transitions to display the new hole information.

20 Apps and Activities

Golf Menu
During a round, you can press to access additional features in the golf menu.
View Green: Allows you to move the pin location to get a more precise distance measurement (Moving the Flag,
page 22).
Virtual Caddie: Requests a club recommendation from the virtual caddie (Virtual Caddie, page 22).
Change Hole: Allows you to manually change the hole.
Change Green: Allows you to change the green when more than one green is available for a hole.
Scorecard: Opens the scorecard for the round (Keeping Score, page 24).
PinPointer: The PinPointer feature is a compass that points to the pin location when you are unable to see the
green. This feature can help you line up a shot even if you are in the woods or in a deep sand trap.
NOTE: Do not use the PinPointer feature while in a golf cart. Interference from the golf cart can affect the
accuracy of the compass.
Wind: Opens a pointer that shows the wind direction and speed relative to the pin (Viewing the Wind Speed and
Direction, page 25).
Round Info: Shows the recorded time, distance, and steps traveled. This automatically starts and stops when
you start or end a round.
Measure Shot: Shows the distance of your previous shot recorded with the Garmin AutoShot™ feature (Viewing
Measured Shots, page 23). You can also manually record a shot (Manually Measuring a Shot, page 24).
Custom Targets: Allows you to save a location, such as an object or obstacle, for the current hole (Saving
Custom Targets, page 25).
Club Stats: Shows your statistics with each golf club, such as distance and accuracy information. Appears when
you pair compatible Approach club tracking sensors or enable the Club Prompt setting.
®

Sunrise & Sunset: Shows the sunrise, sunset, and twilight times for the current day.
Settings: Allows you to customize the golf activity settings (Golf Settings, page 21).
End Round: Ends the current round.
Golf Settings
During a round, you can press , and select Settings to customize the golf settings.
Scoring: Allows you to set the scoring options (Scoring Settings, page 24).
Driver Distance: Sets the average distance the ball travels from the tee box on your drive. The driver distance
appears as an arc on the map.
PlaysLike: Sets preferences for the "plays like" distance feature, which shows adjusted distances to the green
while playing golf (PlaysLike Distance Icons, page 23).
Virtual Caddie: Allows you to select automatic or manual virtual caddie club recommendations. Appears after
you play five rounds of golf, track your clubs, and upload your scorecards to the Garmin Golf™ app.
Big Numbers: Changes the size of the numbers on the hole view screen.
Tournament Mode: Disables the PinPointer and PlaysLike distance features. These features are not allowed
during sanctioned tournaments or handicap calculation rounds.
Golf Distance: Sets the unit of measure for distance while playing golf.
Golf Wind Speed: Sets the unit of measure for wind speed while playing golf.
Club Prompt: Prompts you to enter which golf club you used after each detected shot to record your club
statistics (Recording Statistics, page 24).
Satellites: Sets the satellite system to use for the activity (Satellite Settings, page 49).
Club Sensors: Allows you to set up your compatible Approach club tracking sensors.
Pair Rangefinder: Allows you to pair the watch to your compatible rangefinder.

Apps and Activities 21

Moving the Flag
You can take a closer look at the green and move the pin location.

1 From the hole information screen, press .

2 Select View Green.
3 If necessary, use the slider on the right side of the screen to zoom in or out.
4 Tap or drag to move the pin location.

5 Press .
The distances on the hole information screen are updated to show the new pin location. The pin location is
saved for only the current round.
Virtual Caddie
Before you can use the virtual caddie, you must play five rounds with Approach club tracking sensors or enable
the Club Prompt setting (Activity Settings, page 45), and upload your scorecards. For each round, you must
connect to a paired phone with the Garmin Golf app. The virtual caddie provides recommendations based on the
hole, wind data, and your past performance with each club.

Displays the club or club combination recommendation for the hole. You can select or to view other
club options.

Displays the average number of strokes expected to score with the club recommendation.

Displays the aim direction for your next shot with the club recommendation, based on your shot history
with the club.

22 Apps and Activities

PlaysLike Distance Icons
The PlaysLike distance feature accounts for elevation changes on the course, wind speed, wind direction, and
air density by showing the adjusted distance to the green. During a round, you can tap a distance to the green to
view the PlaysLike distance. You can swipe up or press to see how much the distance has changed due to
each of the factors.
TIP: You can configure what data is factored into the PlaysLike adjustments in the activity settings (PlaysLike
Settings, page 23).
: Distance plays longer than expected.
: Distance plays as expected.
: Distance plays shorter than expected.
: The difference in the distance due to elevation changes.
: The difference in the distance due to the wind speed and direction.
: The difference in the distance due to the air density.
PlaysLike Settings
During a round, press , and select Settings > PlaysLike.
Wind: Enables wind speed and direction to be included in the PlaysLike distance adjustments.
Weather: Enables air density to be included in the PlaysLike distance adjustments.
Home Conditions: Allows you to manually change the altitude, temperature, and humidity settings used for the
air density.
NOTE: It can be helpful to set weather conditions that match where you typically play. If they do not match
the conditions at your normal course locations, the air density adjustments may seem inaccurate.
Measuring Distance with Touch Targeting
While playing a game, you can use touch targeting to measure the distance to any point on the map.
1 While playing golf, tap the map.
2 Tap or drag your finger to position the target circle .
You can view the distance from your current position to the target circle, and from the target circle to the pin
location.
3 If necessary, use the slider on the right side of the screen to zoom in or out.
Viewing Measured Shots
Your device features automatic shot detection and recording. Each time you take a shot along the fairway, the
device records your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the device on your leading wrist and make good
contact with the ball. Putts are not detected.

1 While playing golf, press .

2 Select Measure Shot.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the ball again, putt on the green, or move to the next
hole.

3 Press and select Previous Shots to view all recorded shot distances.
NOTE: The distance from the most recent shot also displays at the top of the hole information screen.

Apps and Activities 23

Manually Measuring a Shot
You can manually add a shot if the watch doesn't detect it. You must add the shot from the location of the
missed shot.
1 Take a shot and watch where your ball lands.

2 From the hole information screen, press .

3 Select Measure Shot.

4 Press .
5 Select Add Shot > .
6 If necessary, enter the club you used for the shot.
7 Walk or drive to your ball.
The next time you take a shot, the watch automatically records your last shot distance. If necessary, you can
manually add another shot.
Keeping Score
1 From the hole information screen, press .
2 Select Scorecard.
The scorecard appears when you are on the green.

3 Press or to scroll through the holes.

4 Press to select a hole.

5 Press or to set the score.

Your total score is updated.
Recording Statistics
Before you can record statistics, you must enable statistics tracking (Scoring Settings, page 24).
1 From the scorecard, select a hole.

2 Enter the total number of strokes taken, including putts, and press .

3 Set the number of putts taken, and press .

NOTE: The number of putts taken is used for statistics tracking only and does not increase your score.
4 If necessary, select an option:
NOTE: If you are on a par 3 hole, fairway information does not appear.
• If your ball hit the fairway, select In Fairway.
• If your ball missed the fairway, select Missed Right or Missed Left.
5 If necessary, enter the number of penalty strokes.
Scoring Settings
During a round, press , and select Settings > Scoring.
Scoring Method: Changes the method the device uses to keep score.
Handicap Scoring: Enables handicap scoring.
Set Handicap: Sets your handicap when handicap scoring is enabled.
Show Score: Displays your total score for the round at the top of the scorecard (Keeping Score, page 24).
Stat Tracking: Enables statistics tracking for the number of putts, greens in regulation, and fairways hit while
playing golf.
Penalties: Enables penalty stroke tracking while playing golf (Recording Statistics, page 24).
Prompt: Enables the prompt at the start of a round asking if you want to keep score.

24 Apps and Activities

About Stableford Scoring
When you select the Stableford scoring method (Activity Settings, page 45), points are awarded based on the
number of strokes taken relative to par. At the end of a round, the highest score wins. The device awards points
as specified by the United States Golf Association.
The scorecard for a Stableford scored game shows points instead of strokes.

Points Strokes Taken Relative to Par

0 2 or more over

1 1 over

2 Par

3 1 under

4 2 under

5 3 under

Viewing the Wind Speed and Direction

The wind feature is a pointer that shows the wind speed and direction relative to the pin. The wind feature
requires a connection with the Garmin Golf app.

1 Press .
2 Select Wind.
The arrow points to the wind direction relative to the pin.
Viewing the Direction to the Pin
The PinPointer feature is a compass that provides directional assistance when you are unable to see the green.
This feature can help you line up a shot even if you are in the woods or in a deep sand trap.
NOTE: Do not use the PinPointer feature while in a golf cart. Interference from the golf cart can affect the
accuracy of the compass.

1 From the hole information screen, press .

2 Select PinPointer.
The arrow points to the pin location.
Saving Custom Targets
While playing a round, you can save up to five custom targets for each hole. Saving a target is useful for
recording objects or obstacles that are not shown on the map. You can view the distances to these targets from
the hazards and layups screen (Playing Golf, page 19).
1 Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently selected hole.

2 From the hole information screen, press .

3 Select Custom Targets.
4 Select a target type.

Apps and Activities 25

Big Numbers Mode
You can change the size of the numbers on the hole information screen.

1 During a round, press .

2 Select Settings > Big Numbers.

The distances to the front, middle, and back of the green appear in large font on the hole information screen.

3 Press or to view additional data, including the PlaysLike distance to the middle of the green, wind
speed and direction, and your handicap rating.
Swing Tempo Training
The Tempo Training activity helps you perform a more consistent swing. The device measures and displays
your backswing time and downswing time. The device also displays your swing tempo. Swing tempo is the
backswing time divided by the downswing time, expressed in a ratio. A 3 to 1 ratio, or 3.0, is the ideal swing
tempo based on studies of professional golfers.

26 Apps and Activities

The Ideal Swing Tempo
You can achieve the ideal 3.0 tempo using different swing timings, for example, 0.7 sec./0.23 sec. or 1.2 sec./
0.4 sec. Each golfer may have a unique swing tempo based on their ability and experience. Garmin provides six
different timings.
The device displays a graph that indicates if your backswing or downswing times are too fast, too slow, or just
right for the selected timing.

Timing choices (backswing to downswing time ratio)

Backswing time

Downswing time

Your tempo

Good timing

Too slow

Too fast

To find your ideal swing timing, you should start with the slowest timing and try it for a few swings. When
the tempo graph is consistently green for both your backswing and downswing times, you can move up to the
next timing. When you find a timing that is comfortable, you can use it to achieve more consistent swings and
performance.
Analyzing Your Swing Tempo
You must hit a ball to view your swing tempo.

1 Press .
2 Select Activities > Other > Tempo Training .

3 Press .
4 Select Settings > Swing Speed, and select an option.
5 Complete a full swing, and hit the ball.
The watch displays your swing analysis.

Apps and Activities 27

Viewing the Tip Sequence
The first time you use the Tempo Training activity, the watch displays a tip sequence to explain how your swing
is analyzed.

1 During your activity, press .

2 Select Tips.

3 Press to view the next tip.

Recording a Bouldering Activity

You can record routes during a bouldering activity. A route is a climbing path along a boulder or small rock
formation.

1 From the watch face, press .

2 Select Activities > Outdoor > Bouldering.
Select a grading system.
3
NOTE: The next time you start a bouldering activity, the watch uses this grading system. You can hold ,
select the activity settings, and select Grading System to change the system.
4 Select the difficulty level for the route.

5 Press to start the route timer.

6 Start your first route.

7 Press to finish the route.

8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.

9 When you are done resting, press to start your next route.
10 Repeat this process for each route until your activity is complete.

11 After your last route, press to stop the route timer.

12 Select Save.
Starting an Expedition
You can use the Expedition activity to prolong the battery life while recording a multi-day activity.

1 From the watch face, press .

2 Select Activities > Outdoor > Expedition.

3 Press to start the activity timer.

The device enters low power mode and collects GPS track points once an hour. To maximize battery life, the
device turns off all sensors and accessories, including the connection to your smartphone.
Recording a Track Point Manually
During an expedition, track points are recorded automatically based on the selected recording interval. You can
manually record a track point at any time.

1 During an expedition, press .

2 Select Add Point.

28 Apps and Activities

Viewing Track Points
1 During an expedition, press .
2 Select View Points.
3 Select a track point from the list.
4 Select an option:
• To start navigating to the track point, select Go To.
• To view detailed information about the track point, select Details.
Going Fishing
1 From the watch face, press .
2 Select Activities > Outdoor > Fish.

3 Press .

4 Press , and select an option:

• To add the catch to your fish count and save the location, select Log Catch.
• To save your current location, select Save Location.
• To set an interval timer, end time, or end time reminder for the activity, select Fish Timers.
• To navigate back to the starting point of your activity, select Back to Start, and select an option.
• To view your saved locations, select Saved Locations.
• To navigate to a destination, select Navigation, and select an option.
• To edit the activity settings, select Settings, and select an option (Activity Settings, page 45).

5 After you complete your activity, press , and select End Fish.

Going Hunting
You can save locations relevant to your hunt and view a map of saved locations. During a hunting activity, the
device uses a GNSS mode that conserves battery life.

1 From the watch face, press .

2 Select Activities > Outdoor > Hunt.

3 Press , and select Start Hunt.

4 Press , and select an option:

• To navigate back to the starting point of your activity, select Back to Start, and select an option.
• To save your current location, select Save Location.
• To view locations saved during this hunt activity, select Hunt Locations.
• To view all previously saved locations, select Saved Locations.
• To navigate to a destination, select Navigation, and select an option.

5 After you complete your hunt, press , and select End Hunt.

Apps and Activities 29

Running
Going for a Track Run
Before you go for a track run, make sure you are running on a standard-shape, 400 m track.
You can use the track run activity to record your outdoor track data, including distance in meters and lap splits.
1 Stand on the outdoor track.

2 From the watch face, press .

3 Select Activities > Running > Track Run.
4 Wait while the watch locates satellites.
5 If you are running in lane 1, skip to step 8.
6 Select Lane Number.
7 Select a lane number.

8 Press .
9 Run around the track.

10 After you complete your activity, press , and select Save.

Tips for Recording a Track Run

• Wait until the watch acquires satellite signals before starting a track run.
• During your first run on an unfamiliar track, run four laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
• Run each lap in the same lane.
NOTE: The default Auto Lap distance is 1600 m, or four laps around the track.
®

• If you are running in a lane other than lane 1, set the lane number in the activity settings.
Going for a Virtual Run
You can pair your watch with a compatible third-party app to transmit pace, heart rate, or cadence data.

1 From the watch face, press .

2 Select Activities > Running > Virtual Run.
3 On your tablet, laptop, or phone, open the Zwift™ app or another virtual training app.
4 Follow the on-screen instructions to start a running activity and pair the devices.

5 Press to start the activity timer.

6 After you complete your activity, press , and select Save.

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run
at least 2.4 km (1.5 mi.) on a treadmill. If you use different treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1 Start a treadmill activity (Starting an Activity, page 17).
2 Run on the treadmill until your watch records at least 2.4 km (1.5 mi.).

3 After you finish the activity, press to stop the activity timer.
4 Select an option:
• To calibrate the treadmill distance the first time, select Save.
The device prompts you to complete the treadmill calibration.
• To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > .
5 Check the treadmill display for the distance traveled, and enter the distance on your watch.

30 Apps and Activities

Recording an Ultra Run Activity
1 From the watch face, press .
2 Select Activities > Running > Ultra Run.

3 Press to start the activity timer.

4 Start running.

5 Press to record a lap and start the rest timer.

TIP: You can configure how the Auto Rest setting records rest splits and laps (Ultra Run Auto Rest Settings,
page 31).

6 When you are done resting, press to resume running.

7 Press or to view additional data pages (optional).

8 After you complete your activity, press , and select Save.

Ultra Run Auto Rest Settings

You can customize the options for automatically starting and stopping the rest timer for the Ultra Run activity.
Status: Enables automatically recording rest splits.
Rest Start: Automatically starts the rest timer when you stop running. You can use the Manual Only option to
start the rest timer only when you press .
Rest End: Sets the pace required to end a rest split.
Minimum Time: Sets the amount of time before a rest split starts or ends.

Lap Key: Sets the button to record a lap and start the rest timer, start the rest timer only, or record a lap
only.
Recording an Obstacle Racing Activity
When you participate in an obstacle course race, you can use the Obstacle Racing activity to record your time on
each obstacle and your time running between obstacles.

1 From the watch face, press .

2 Select Activities > Running > Obstacle Racing.

3 Press to start the activity timer.

4 Press to manually mark the beginning and end of each obstacle.

NOTE: You can configure the Obstacle Tracking setting to save obstacle locations from your first loop of the
course. On repeat loops of the course, the watch uses the saved locations to switch between obstacle and
running intervals.

5 After you complete your activity, press , and select Save.

PacePro™ Training
Many runners like to wear a pace band during a race to help achieve their race goal. The PacePro feature allows
you to create a custom pace band based on distance and pace or distance and time. You can also create a pace
band for a known course to optimize your pace effort based on elevation changes.
You can create a PacePro plan using the Garmin Connect app. You can preview the splits and elevation plot
before you run the course.

Apps and Activities 31

Downloading a PacePro Plan from Garmin Connect
Before you can download a PacePro plan from Garmin Connect, you must have a Garmin Connect account
(Garmin Connect, page 92).
1 Select an option:
• Open the Garmin Connect app, and select .
• Go to connect.garmin.com.
2 Select Training & Planning > PacePro Pacing Strategies.
3 Follow the on-screen instructions to create and save a PacePro plan.
4 Select or Send to Device.
Creating a PacePro Plan on Your Watch
Before you can create a PacePro plan on your watch, you must create a course (Creating a Course on Garmin
Connect, page 110).

1 From the watch face, press .

2 Select an outdoor running activity.

3 Hold .
4 Select Navigation > Courses.
5 Select a course.
6 Select PacePro > Create New.
7 Select an option:
• Select Goal Pace, and enter your target pace.
• Select Goal Time, and enter your target time.
The watch displays your custom pace band.

8 Press .
9 Select an option:
• Select Accept Plan to start the plan.
• Select View Splits to preview the splits.
• Select Elevation Plot to view an elevation plot of the course.
• Select Map to view the course on the map.
• Select Remove to discard the plan.

32 Apps and Activities

Starting a PacePro Plan
Before you can start a PacePro plan, you must download a plan from your Garmin Connect account.

1 From the watch face, press .

2 Select an outdoor running activity.

3 Hold .
4 Select Training > PacePro Plans.
5 Select a plan.

6 Press .
TIP: You can preview the splits, elevation plot, and the map before you accept the PacePro plan.
7 Select Accept Plan to start the plan.
8 If necessary, select to enable course navigation.

9 Press to start the activity timer.

Target split pace

Current split pace

Completion progress for the split

Distance remaining in the split

Overall time ahead of or behind your target time

TIP: You can hold , and select Stop PacePro > to stop the PacePro plan. The activity timer continues
running.

Apps and Activities 33

Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with the device may damage the product and will
void the warranty.
NOTE: The watch has wrist-based heart rate enabled for swim activities. The watch is also compatible with
chest heart rate monitors, such as the HRM-Pro™ series accessories. If both wrist-based heart rate and chest
heart rate data are available, your watch uses the chest heart rate data.
Swim Terminology
Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts after a rest.
Stroke: A stroke is counted every time your arm wearing the watch completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool length and the number of strokes for that length.
For example, 30 seconds plus 15 strokes equals a swolf score of 45. For open water swimming, swolf is
calculated over 25 meters. Swolf is a measurement of swimming efficiency and, like golf, a lower score is
better.
Critical swim speed (CSS): Your CSS is the theoretical speed that you can maintain continuously without
exhaustion. You can use your CSS to guide your training pace and monitor your improvement.
Stroke Types
Stroke type identification is available only for pool swimming. Your stroke type is identified at the end of a
length. Stroke types appear in your swimming history and in your Garmin Connect account. You can also select
stroke type as a custom data field (Customizing the Data Screens, page 44).
Free Freestyle

Back Backstroke

Breast Breaststroke

Fly Butterfly

Mixed More than one stroke type in an interval

Drill Used with drill logging (Training with the Drill Log, page 35)

Tips for Swimming Activities

• Press to record an interval during open water swimming.
Before starting a pool swimming activity, follow the on-screen instructions to select your pool size or enter a
• custom size.
The watch measures and records distance by completed pool lengths. The pool size must be correct to
display accurate distance. The next time you start a pool swimming activity, the watch uses this pool size.
You can hold , select the activity settings, and select Pool Size to change the size.
• For accurate results, swim the entire pool length, and use one stroke type for the entire length. Pause the
activity timer when resting.

• Press to record a rest during pool swimming (Swim Auto Rest and Manual Rest, page 35).
The watch automatically records swim intervals and lengths for pool swimming.
• To help the watch count your lengths, use a strong push off the wall and glide before your first stroke.
• When doing drills, you must either pause the activity timer or use the drill logging feature (Training with the
Drill Log, page 35).

34 Apps and Activities

Swim Auto Rest and Manual Rest
The auto rest feature is available only for pool swimming. Your watch automatically detects when you are
resting, and the rest screen appears. If you rest for more than 15 seconds, the watch automatically creates a
rest interval. When you resume swimming, the watch automatically starts a new swim interval.
TIP: For best results using the auto rest feature, minimize your arm motions while resting.
To use manual rests instead, you can turn off the auto rest feature in the activity options (Activity Settings,
page 45). During a pool or open water swim activity, you can manually mark a rest interval by pressing .
Swim data is not recorded during a rest interval.
TIP: Use manual rests if you are taking short rests or you want very precise swim interval timing.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can use the drill log feature to manually record kick
sets, one-arm swimming, or any type of swimming that is not one of the four major strokes.

1 During your pool swim activity, press or to view the drill log screen.

2 Press to start the drill timer.

3 After you complete a drill interval, press .

The drill timer stops, but the activity timer continues to record the entire swim session.
4 Select a distance for the completed drill.
Distance increments are based on the pool size selected for the activity profile.
Select an option:
5
• To start another drill interval, press .

• To start a swim interval, press or to return to the swim training screens.

Cycling
Using an Indoor Trainer
Before you can use a compatible indoor trainer, you must pair the trainer with your watch using ANT+
®

technology (Pairing Your Wireless Sensors, page 85).

You can use your watch with an indoor trainer to simulate resistance while following a course, ride, or workout.
While using an indoor trainer, GPS is turned off automatically.

1 From the watch face, press .

2 Select Activities > Cycling > Bike Indoor.

3 Hold .
4 Select Smart Trainer Options.
5 Select an option:
• Select Free Ride to go for a ride.
• Select Follow Workout to follow a saved workout (Workouts, page 7).
• Select Follow Course to follow a saved course (Courses, page 108).
• Select Set Power to set the target power value.
• Select Set Grade to set the simulated grade value.
• Select Set Resistance to set the resistance force applied by the trainer.

6 Press to start the activity timer.

The trainer increases or decreases resistance based on the elevation information in the course or ride.

Apps and Activities 35

Power Guide
You can create and use a power strategy to plan your effort on a course. Your Enduro device uses your FTP, the
course elevation, and the projected time it will take you to complete the course to create a customized power
guide.
One of the most important steps in planning a successful power guide strategy is choosing your effort level.
Putting a harder effort into the course will increase the power recommendations, while choosing an easier effort
will reduce them (Creating and Using a Power Guide, page 36). The primary goal of a power guide is to help you
complete the course based on what is known about your ability, not to achieve a specific target time. You can
adjust the effort level during your ride.
Power guides are always associated with a course and cannot be used with workouts or segments. You can
view and edit your strategy in the Garmin Connect app and sync it with compatible Garmin devices. This feature
requires a power meter, which must be paired with your device (Pairing Your Wireless Sensors, page 85).
Creating and Using a Power Guide
Before you can create a power guide, you must pair a power meter with your watch (Pairing Your Wireless
Sensors, page 85). You must also have a course loaded to your watch (Creating a Course on Garmin Connect,
page 110).
You can also create a power guide in the Garmin Connect app.

1 From the watch face, press .

2 Select an outdoor biking activity.

3 Hold .
4 Select Training > Power Guide > Create New.
5 Select a course (Courses, page 108).
6 Select a riding position.
7 Select a gear weight.

8 Press , and select Use Plan.

TIP: You can preview the map, elevation plot, effort, settings, and splits. You can also adjust the effort,
terrain, riding position, and gear weight before you start riding.

Multisport
Triathletes, duathletes, and other multisport competitors can take advantage of the multisport activities, such
as Triathlon or Swimrun. During a multisport activity, you can transition between activities and continue to view
your total time. For example, you can switch from biking to running and view your total time for biking and
running throughout the multisport activity.
You can customize a multisport activity, or you can use the default triathlon activity set up for a standard
triathlon.

36 Apps and Activities

Triathlon Training
When you participate in a triathlon, you can use the triathlon activity to quickly transition to each sport segment,
to time each segment, and to save the activity.

1 From the watch face, press .

2 Select Activities > Swimming > Triathlon.

3 Press to start the activity timer.

NOTE: Auto Sport Change is the default setting for multisport activities (Activity Settings, page 45).

4 If necessary, press at the beginning and end of each transition (How can I undo a lap button press?,
page 131).
The transition feature is on by default, and the transition time is recorded separately from the activity time.
The transition feature can be turned on or off in the triathlon activity settings. If transitions are turned off,
press to change sports.

5 After you complete your activity, press , and select Save.

Creating a Multisport Activity

1 From the watch face, press .
2 Select Activities > Edit > Add > Multisport.
3 Select a multisport activity type, or enter a custom name.
Duplicate activity names include a number. For example, Triathlon(2).
4 Select two or more activities.
5 Select an option:
• Select an option to customize specific activity settings. For example, you can select whether to include
transitions.
• Select Done to save and use the multisport activity.

Gym Activities
The watch can be used for training indoors, such as running on an indoor track or using a stationary bike or
indoor trainer. GPS is turned off for indoor activities (Activity Settings, page 45).
When running or walking with GPS turned off, speed and distance are calculated using the accelerometer in the
watch. The accelerometer is self-calibrating. The accuracy of the speed and distance data improves after a few
outdoor runs or walks using GPS.
TIP: Holding the handrails of the treadmill reduces accuracy.
When cycling with GPS turned off, speed and distance data are not available unless you have an optional sensor
that sends speed and distance data to the watch, such as a speed or cadence sensor.

Apps and Activities 37

Recording a Strength Training Activity
You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move.

1 From the watch face, press .

2 Select Activities > Gym > Strength.
3 Select a workout.

4 Press to view a list of workout steps (optional).

TIP: While viewing workout steps, you can press and then press to view an animation of the
selected exercise, if available.

5 When you have finished viewing the workout steps, press , and select Do Workout.

6 Press , and select Start Workout.

7 Start your first set.
The watch counts your reps. Your rep count appears when you complete at least four reps.
TIP: The watch can only count reps of a single move for each set. When you want to change moves, you
should finish the set and start a new one.

8 Press to finish the set and move to the next exercise, if available.
The watch displays the total reps for the set.

9 If necessary, press or to edit the number of reps.

TIP: You can also add the weight used for the set.

10 If necessary, press when you are done resting to start your next set.
11 Repeat for each strength training set until your activity is complete.

12 After your last set, press , and select Stop Workout.

13 Select Save.

38 Apps and Activities

Recording a HIIT Activity
You can use specialized timers to record a high-intensity interval training (HIIT) activity.

1 From the watch face, press .

2 Select Activities > Gym > HIIT.
3 Select an option:
• Select Free to record an open, unstructured HIIT activity.
• Select HIIT Timers > AMRAP to record as many rounds as possible during a set time period.
• Select HIIT Timers > EMOM to record a set number of moves every minute on the minute.
• Select HIIT Timers > Tabata to alternate between 20-second intervals of maximum effort with 10 seconds
of rest.
• Select HIIT Timers > Custom to set your move time, rest time, number of moves, and number of rounds.
• Select Workouts to follow a saved workout.
4 If necessary, follow the on-screen instructions.

5 Press to start your first round.

The watch displays a countdown timer and your current heart rate.

6 If necessary, press to manually move to the next round or rest.

7 After you finish the activity, press to stop the activity timer.
8 Select Save.
Recording an Indoor Climbing Activity
You can record routes during an indoor climbing activity. A route is a climbing path along an indoor rock wall.

1 From the watch face, press .

2 Select Activities > Gym > Climb Indoor.
3 Select to record route statistics.
Select a grading system.
4
NOTE: The next time you start an indoor climbing activity, the device uses this grading system. You can hold
, select the activity settings, and select Grading System to change the system.
5 Select the difficulty level for the route.

6 Press .
7 Start your first route.
NOTE: When the route timer is running, the device automatically locks the buttons to prevent accidental
button presses. You can hold any button to unlock the watch.
When you finish the route, descend to the ground.
8
The rest timer starts automatically when you are on the ground.

NOTE: If necessary, you can press to finish the route.

9 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
10 Enter the number of falls for the route.

11 When you are done resting, press and begin your next route.
12 Repeat this process for each route until your activity is complete.

Apps and Activities 39

13 Press .
14 Select Save.

Winter Sports
Viewing Your Ski Runs
Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs when
you start moving down hill.
1 Start a skiing or snowboarding activity.

2 Hold .
3 Select View Runs.

4 Press and to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.
Recording a Backcountry Skiing or Snowboarding Activity
The backcountry skiing or snowboarding activity lets you switch between climbing and descending tracking
modes so you can accurately track your statistics. You can customize the Mode Tracking setting to
automatically or manually switch tracking modes (Activity Settings, page 45).

1 From the watch face, press .

2 Select an option:
• Select Activities > Winter Sports > Backcountry Ski.
• Select Activities > Winter Sports > Backcountry Snowboard.
3 Select an option:
• If you are starting your activity on a climb, select Climbing.
• If you are starting your activity moving downhill, select Descending.

4 Press to start the activity timer.

5 If necessary, press to switch between climbing and descending tracking modes.

6 After you complete your activity, press , and select Save.

Cross-Country Skiing Power Data

NOTE: The HRM-Pro series accessory must be paired to the Enduro watch using ANT+ technology.
You can use your compatible Enduro watch paired with the HRM-Pro series accessory to provide real-time
feedback about your cross-country skiing performance. The power output is measured in watts. Factors that
affect power include your speed, elevation changes, wind, and snow conditions. You can use power output to
measure and improve your skiing performance.
NOTE: Skiing power values are generally lower than cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at cycling. It is common for ski power values to be 30 to 40
percent lower than cycling power values at the same training intensity.

40 Apps and Activities

Water Sports
Viewing Your Water Sport Runs
Your watch records the details of each water sport run using the auto run feature. This feature automatically
records new runs based on your movement. The activity timer pauses when you stop moving. The activity timer
starts automatically when your movement speed increases. You can view run details from the paused screen or
while the activity timer is running.
1 Start a water sport activity, such as water skiing.

2 Hold .
3 Select View Runs.

4 Press and to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, and average speed.
Sailing
Tack Assist
CAUTION
The watch uses GPS-based course over ground to determine your course in the tack assist feature, and
does not account for other factors that can affect your boat's direction, such as currents and tides. You are
responsible for the safe and prudent operation of your vessel.
While cruising or racing into the wind, the tack assist feature can help you determine if your boat is being lifted
or headed. When you calibrate tack assist, the watch captures your boat's port and starboard course
over ground (COG) measurements, and uses the COG data to calculate the mean true wind direction and the
boat's tack angle .

The watch uses this data to determine whether your boat is being lifted or headed due to wind shifts.
By default, the tack assist feature is set to automatic. Each time you calibrate the port or starboard COG, the
watch recalibrates the opposite side and true wind direction. You can change the tack assist settings to enter a
fixed tack angle or true wind direction.

Apps and Activities 41

Calibrating the Tack Assist
1 From the watch face, select .
2 Select Water Sports, and select Sail.

3 Select or to view the tack assist screen.

NOTE: You may need to add the tack assist screen to the data screens for the activity (Customizing the Data
Screens, page 44).

4 Select .
Select an option:
5
• To calibrate the starboard side, select .

• To calibrate the port side, select .

TIP: If the wind is coming from the starboard side of the vessel, you should calibrate starboard. If the wind is
coming from the port side of the vessel, you should calibrate port.
6 Wait while the device calibrates the tack assist.
An arrow appears and indicates if your boat is being lifted or headed.
Entering a Fixed Tack Angle
1 From the watch face, press .
2 Select Water Sports, and select Sail.

3 Press or to view the tack assist screen.

4 Hold .
5 Select Tack Angle > Angle.

6 Press or to set the value.

Entering a True Wind Direction

1 From the watch face, press .
2 Select Water Sports, and select Sail.

3 Press or to view the tack assist screen.

4 Hold .
5 Select True Wind Direction > Fixed.

6 Press or to set the value.

Tips for Getting the Best Lift Estimate

To get the best lift estimate when using the tack assist feature, you can try these tips. See Entering a True Wind
Direction, page 42 and Calibrating the Tack Assist, page 42 for more information.
• Enter a fixed tack angle, and calibrate the port side.
• Enter a fixed tack angle, and calibrate the starboard side.
• Reset the tack angle, and calibrate both the port and starboard side.

Customizing Activities and Apps

You can customize the activities and apps list, data screens, data fields, and other settings.

42 Apps and Activities

Customizing the App List
1 From the watch face, press .
2 Select Edit.
3 Select Reorder.
Select an option:
4
• To change the location of an app in the list, select an app, press or to move the app, and press
to select the new location.
• To remove an app from the list, select the app, and select .
• To add an app, select Add, and select one or more apps.

Customizing Your Favorite Activities List

Your favorite activities list appears at the top of the list, and it provides quick access to the activities you use
frequently. You can add or remove favorite activities at any time.

1 From the watch face, press .

2 Select Activities.
Your favorite activities appear at the top of the list.
3 Select Edit.
Select an option:
4
• To change the location of an activity in the list, select an activity, press or to move the activity,
and press to select the new location.
• To remove a favorite activity, select the activity, and select .
• To add a favorite activity, select Add, and select one or more activities.
Pinning a Favorite Activity to the List
You can pin up to three favorite activities to the top of the app and activity lists.

1 From the watch face, press .

2 Select Activities.
3 Scroll to a favorite activity (Customizing Your Favorite Activities List, page 43).

4 Hold , and select Pin Activity.

The next time you press from the watch face to open the app and activity lists, the pinned activity appears
at the top of the list.

Apps and Activities 43

Customizing the Data Screens
You can show, hide, and change the layout and content of data screens for each activity.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press , and select Activity Options.

4 Select Data Screens.
5 Select a data screen to customize.
6 Select an option:
• Select Layout to adjust the number of data fields on the data screen.
• Select Data Fields, and select a field to change the data that appears in the field.
TIP: For a list of all the available data fields, go to Data Fields, page 133. Not all data fields are available
for all activity types.
• Select Reorder to change the location of the data screen in the loop.
• Select Remove to remove the data screen from the loop.
7 If necessary, select Add New to add a data screen to the loop.
You can add a custom data screen, or select one of the predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.

1 Hold .
2 Select Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens > Add New > Map.

Creating a Custom Activity

1 From the watch face, press .
2 Select Activities > Edit > Add.
3 Select an option:
• Select Copy Activity to create your custom activity starting from one of your saved activities.
• Select Other > Other to create a new custom activity.
4 If necessary, select an activity type.
5 Select a name or enter a custom name.
Duplicate activity names include a number, for example: Bike(2).
6 Select an option:
• Select an option to customize specific activity settings. For example, you can customize the data screens
or auto features.
• Select Done to save and use the custom activity.

44 Apps and Activities

Activity Settings
These settings allow you to customize each preloaded activity based on your needs. For example, you can
customize data screens and enable alerts and training features. Not all settings are available for all activity
types. Some activity types have separate settings lists (Golf Settings, page 21).

From the watch face, press , select Activities, select an activity, press , and select Activity Options.
3D Distance: Calculates your distance traveled using your elevation change as well as your horizontal
movement over ground.
3D Speed: Calculates your speed using your elevation change as well as your horizontal movement over ground.
Accent Color: Sets the accent color for the activity icon.
Add Activity: Adds an activity type to a multisport activity.
Alerts: Sets the training or navigation alerts for the activity (Activity Alerts, page 47).
Auto Climb: Detects elevation changes using the built-in altimeter and automatically displays relevant climb
data (Enabling Auto Climb, page 49).
Auto Lap: Sets the options for the Auto Lap feature to automatically mark laps. The Auto Distance option
marks laps at a specific distance. The Auto Position option marks laps at a location where you previously
pressed . When you complete a lap, a customizable lap alert message appears. This feature is helpful for
comparing your performance over different parts of an activity.
Auto Pause: Sets the options for the Auto Pause feature to stop recording data when you stop moving or when
®

you drop below a specified speed. This feature is helpful if your activity includes stop lights or other places
where you must stop.
Auto Rest: Automatically creates a rest interval when you stop moving during a pool swim activity (Swim Auto
Rest and Manual Rest, page 35). Sets the options for automatically starting and stopping the rest timer for the
ultra run activity (Ultra Run Auto Rest Settings, page 31).
Auto Run: Automatically detects ski or water sport runs using the built-in accelerometer (Viewing Your Ski Runs,
page 40, Viewing Your Water Sport Runs, page 41).
Auto Scroll: Automatically scrolls through all of the activity data screens while the activity timer is running.
Auto Set: Automatically starts and stops exercise sets during a strength training activity.
Auto Sport Change: Automatically detects a transition to the next sport in a multisport activity, such as a
triathlon.
Auto Start: Automatically starts a motocross or BMX activity when you start moving.
Background Color: Sets the background color of the data screens to black or white.
Broadcast Heart Rate: Automatically broadcasts heart rate data from your watch to paired devices when you
start the activity (Broadcasting Heart Rate Data, page 99).
ClimbPro: Displays ascent information for upcoming and current climbs while navigating a course (Using
ClimbPro, page 48).
Countdown Start: Enables a countdown timer for pool swimming intervals.
Data Screens: Customizes data screens and adds new data screens for the activity (Customizing the Data
Screens, page 44).
Edit Weight: Prompts you to add the weight used for an exercise set during a strength training or cardio activity.
Flashlight Strobe: Sets the LED flashlight strobe mode, speed, and color during the activity.
Grading System: Sets the grading system for rating the route difficulty for a rock climbing activity.
Jump Mode: Sets the jump rope activity target to a set time, number of reps, or open ended.
Lane Number: Sets your lane number for track running.
Laps: Configures the settings for the Auto Lap, Lap Key, and Lap Alert options.
Lap Alert: Sets the data fields to show for laps.

Lap Key: Enables the button for recording a lap or rest during an activity.

Apps and Activities 45

Lock Device: Locks the touchscreen and buttons during a multisport activity to prevent inadvertent button
presses and touchscreen swipes.
Map: Sets the display preferences for the map data screen for the activity (Map Settings, page 103).
Metronome: Plays tones or vibrates at a steady rhythm to help you improve your performance by training at a
faster, slower, or more consistent cadence. You can set the beats per minute (bpm) of the cadence you want
to maintain, beat frequency, and sound settings.
Mode Tracking: Sets the ascent and descent tracking mode to automatic or manual for backcountry skiing and
snowboarding.
Obstacle Tracking: Saves obstacle locations from your first loop of the course. On repeat loops of the course,
the watch uses the saved locations to switch between obstacle and running intervals (Recording an Obstacle
Racing Activity, page 31).
Pool Size: Sets the pool length for pool swimming.
Power Averaging: Controls whether the watch includes zero values for bike power data that occur when you are
not pedaling.
Power Mode: Sets the default power mode for the activity.
Power Save Timeout: Sets the timeout limit for the watch to stay in activity mode while waiting for you to start
the activity, for example, when you are waiting for a race to start. The Normal option sets the watch to enter
low-power watch mode after 5 minutes of inactivity. The Extended option sets the watch to enter low-power
watch mode after 25 minutes of inactivity. The extended mode can result in shorter battery life between
charges.
Record After Sunset: Sets the watch to record track points after sunset during an expedition.
Record Temperature: Records the ambient temperature around the watch or from a paired temperature sensor.
Record VO2 Max.: Records a VO2 max. estimate for trail run and ultra run activities.
Recording Interval: Sets the frequency for recording track points during an expedition. By default, GPS track
points are recorded once an hour, and they are not recorded after sunset. Recording track points less
frequently maximizes battery life.
Rename: Sets the activity name.
Rep Counting: Records rep counts during a workout. The Workouts Only option records rep counts during
guided workouts only.
Repeat: Records repeats for multisport activities. For example, you can use this option for activities that include
multiple transitions, such as a swimrun.
Restore Defaults: Resets the activity settings.
Route Stats: Records route statistics for indoor climbing activities.
Routing: Sets the preferences for calculating routes for the activity (Routing Settings, page 48).
Running Power: Records running power data and customizes the settings (Running Power Settings, page 87).
Runs: Configures the settings for the Auto Run, Lap Key, and Lap Alert options.
Satellites: Sets the satellite system to use for the activity (Satellite Settings, page 49).
Segments: Displays your saved segments for the activity (Segments, page 49). The Auto Effort option
automatically adjusts the target race time of a segment based on your performance during the segment.
Segment Alerts: Notifies you about approaching saved segments (Segments, page 49).
Self Evaluation: Sets how often you evaluate your perceived effort for the activity (Evaluating an Activity,
page 18).
SpeedPro: Records advanced speed metrics for windsurf activity runs.
Stroke Detection: Automatically detects your stroke type for pool swimming.
Swimrun Auto Sport Change: Automatically transitions between the swim portion and the run portion of a
swimrun multisport activity.
Touch: Enables the touchscreen during an activity or only for the map screen.
Touch Lock: Enables swiping down from the top of the screen to unlock the touchscreen.
Transitions: Enables transitions for multisport activities.

46 Apps and Activities

Units: Sets the units of measure for the activity.
Vibration Alerts: Notifies you to inhale or exhale during a breathwork activity.
Workout Videos: Plays instructive workout animations for a strength, cardio, yoga, or Pilates activity.
Animations are available for pre-installed workouts and workouts downloaded from your Garmin Connect
account.
Activity Alerts
You can set alerts for each activity, which can help you to train toward specific goals, to increase your
awareness of your environment, and to navigate to your destination. Some alerts are available only for specific
activities. There are three types of alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you one time. The event is a specific value. For example, you can set the
watch to alert you when you burn a specified number of calories.
Range alert: A range alert notifies you each time the watch is above or below a specified range of values. For
example, you can set the watch to alert you when your heart rate is below 60 beats per minute (bpm) and
over 210 bpm.
Recurring alert: A recurring alert notifies you each time the watch records a specified value or interval. For
example, you can set the watch to alert you every 30 minutes.

Alert Name Alert Type Description

Cadence Range You can set minimum and maximum cadence values.

Calories Event, recurring You can set the number of calories.

You can select an existing message or create a custom message and select
Custom Event, recurring
an alert type.

Distance Event, recurring You can set a distance interval.

Elevation Range You can set minimum and maximum elevation values.

You can set minimum and maximum heart rate values or select zone
Heart Rate Range changes. See About Heart Rate Zones, page 116 and Heart Rate Zone Calcu­
lations, page 118.

Pace Range You can set minimum and maximum pace values.

Pacing Recurring You can set a target swim pace.

Power Range You can set the high or low power level.

Proximity Event You can set a radius from a saved location.

Run/Walk Recurring You can set timed walking breaks at regular intervals.

Running Power Event, range You can set minimum and maximum power zone values.

Speed Range You can set minimum and maximum speed values.

Stroke Rate Range You can set high or low strokes per minute.

Time Event, recurring You can set a time interval.

Track Timer Recurring You can set a track time interval in seconds.

Apps and Activities 47

Setting an Alert
1 From the watch face, press .
2 Select Activities, and select an activity.
NOTE: This feature is not available for all activities.

3 Press , and select Activity Options.

4 Select Alerts.
5 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
6 If necessary, select the type of alert.
7 Select a zone, enter the minimum and maximum values, or enter a custom value for the alert.
8 If necessary, turn on the alert.
For event and recurring alerts, a message appears each time you reach the alert value. For range alerts, a
message appears each time you exceed or drop below the specified range (minimum and maximum values).
Routing Settings
You can change the routing settings to customize the way the watch calculates routes for each activity.
NOTE: Not all settings are available for all activity types.

From the watch face, press , select Activities, select an activity, press , and select Activity Options >
Routing.
Activity: Sets an activity for routing. The watch calculates routes optimized for the type of activity you are doing.
Popularity Routing: Calculates routes based on the most popular runs and rides from Garmin Connect.
Courses: Sets how you navigate courses using the watch. Use the Follow Course option to navigate a course
exactly as it appears, without recalculating. Use the Use Map option to navigate a course using routable
maps, and recalculate the route if you stray from the course.
Calculation Method: Sets the calculation method to minimize the time, distance, or ascent in routes.
Avoidances: Sets the road or transportation types to avoid in routes.
Type: Sets the behavior of the pointer that appears during direct routing.
Using ClimbPro
The ClimbPro feature helps you manage your effort for the upcoming climbs on a course. You can view climb
details, including gradient, distance, and elevation gain, before or in real time while following a course. Cycling
climb categories, based on length and gradient, are indicated by color.

1 From the watch face, press .

2 Select Activities, and select an activity.
NOTE: This feature is not available for all activities.

3 Press , and select Activity Options.

4 Select ClimbPro > Status > When Navigating.
5 Select an option:
• Select Data Field to customize the data field that appears on the ClimbPro screen.
• Select Alert to set alerts at the start of a climb or at a certain distance from the climb.
• Select Descents to turn descents on or off for running activities.
• Select Climb Detection to choose the types of climbs detected during cycling activities.
6 Review the climbs and course details for the course (Using the Saved App, page 12).
7 Start following a saved course (Navigating to a Destination, page 105).

48 Apps and Activities

Enabling Auto Climb
You can use the auto climb feature to detect elevation changes automatically. You can use it during activities
such as climbing, hiking, running, or biking.

1 From the watch face, press .

2 Select Activities, and select an activity.
NOTE: This feature is not available for all activities.

3 Press , and select Activity Options.

4 Select Auto Climb > Status.
5 Select Always or When Not Navigating.
6 Select an option:
• Select Run Screen to identify which data screen appears while running.
• Select Climb Screen to identify which data screen appears while climbing.
• Select Invert Colors to reverse the display colors when changing modes.
• Select Vertical Speed to set the rate of ascent over time.
• Select Mode Switch to set how quickly the device changes modes.
NOTE: The Current Screen option allows you to automatically switch to the last screen you were viewing
before the auto climb transition occurred.
Satellite Settings
You can change the satellite settings to customize the satellite systems used for each activity. For more
information about satellite systems, go to garmin.com/aboutGPS.

From the watch face, press , select Activities, select an activity, press , and select Activity Options >
Satellites.
NOTE: This feature is not available for all activities.
Off: Disables satellite systems for the activity.
Use Default: Enables the watch to use the default activity focus mode setting for satellites (Customizing the
Activity Focus Mode, page 96).
GPS Only: Enables the GPS satellite system.
All Systems: Enables multiple satellite systems. Using multiple satellite systems together offers increased
performance in challenging environments and faster position acquisition than using GPS only. However,
using multiple systems can reduce battery life more quickly than using GPS only.
All + Multi-Band: Enables multiple satellite systems on multiple frequency bands. Multi-band systems use
multiple frequency bands and allow for more consistent track logs, improved positioning, improved multi-
path errors, and fewer atmospheric errors when using the watch in challenging environments.
Auto Select: Enables the watch to use SatIQ™ technology to dynamically select the best multi-band system
based on your environment. The Auto Select setting offers the best positioning accuracy while still
prioritizing battery life.
UltraTrac: Records track points and sensor data less frequently. Enabling the UltraTrac feature increases
battery life but decreases the quality of recorded activities. You should use the UltraTrac feature for activities
that demand longer battery life and for which frequent sensor data updates are less important.
Segments
You can send running or cycling segments from your Garmin Connect account to your device. After a segment
is saved to your device, you can race a segment, trying to match or exceed your personal record or other
participants who have raced the segment.
NOTE: When you download a course from your Garmin Connect account, you can download all of the available
segments in the course.

Apps and Activities 49

Strava™ Segments
You can download Strava segments to your Enduro device. Follow Strava segments to compare your
performance with your past rides, friends, and pros who have ridden the same segment.
To sign up for a Strava membership, go to the segments menu in your Garmin Connect account. For more
information, go to www.strava.com.
The information in this manual applies to both Garmin Connect segments and Strava segments.
Viewing Segment Details
1 From the watch face, press .
2 Select Activities, and select an activity.
NOTE: This feature is not available for all activities.

3 Press , and select Activity Options.

4 Select Segments.
5 Select a segment.
6 Select an option:
• Select Race Times to view the time and average speed or pace for the segment leader.
• Select Map to view the segment on the map.
• Select Elevation Plot to view an elevation plot of the segment.
Racing a Segment
Segments are virtual race courses. You can race a segment, and compare your performance to past activities,
others' performance, connections in your Garmin Connect account, or other members of the running or cycling
communities. You can upload your activity data to your Garmin Connect account to view your segment position.
NOTE: If your Garmin Connect account and Strava account are linked, your activity is automatically sent to your
Strava account so you can review the segment position.

1 From the watch face, press .

2 Select an activity.
3 Go for a run or ride.
When you approach a segment, a message appears, and you can race the segment.
4 Start racing the segment.
A message appears when the segment is complete.

50 Apps and Activities

 Controls
The controls menu lets you quickly access watch features and options. You can add, reorder, and remove the
options in the controls menu (Customizing the Controls Menu, page 54).

From any screen, hold .

Controls 51
Icon Name Description

ABC Select to open the altimeter, barometer, and compass app.

Airplane Mode Select to enable or disable airplane mode to turn off all wireless communications.

Alarm Clock Select to add or edit an alarm (Setting an Alarm, page 74).

Altimeter Select to open the altimeter screen.

Select to view the current time of day in additional time zones (Adding Alternate
Alt. Time Zones
Time Zones, page 77).

Assistance Select to send an assistance request (Requesting Assistance, page 112).

Barometer Select to open the barometer screen.

Select to enable or disable the battery saver feature (Customizing the Battery
Battery Saver
Saver Feature, page 119).

Select to adjust the screen brightness (Display and Brightness Settings,

Backlight
page 82).

Broadcast Heart Select to turn on heart rate broadcasting to a paired device (Broadcasting Heart
Rate Rate Data, page 99).

Calendar Select to view upcoming events from your phone calendar.

Select to open the Clocks app to set an alarm, timer, stopwatch, or view alternate
Clocks
time zones (Clocks, page 74).

Compass Select to open the compass screen.

Turns off the screen for alerts, gestures, and Always On Display mode (Display
Display
and Brightness Settings, page 82).

Select to enable or disable do not disturb mode to dim the screen and disable
Do Not Disturb alerts and notifications. For example, you can use this mode while watching a
movie.

Select to play an audible alert on your paired phone, if it is within Bluetooth

range. The Bluetooth signal strength appears on the Enduro watch screen, and it
Find My Phone increases as you move closer to your phone.
Select to navigate to your lost phone during a GPS activity (Locating a Phone Lost
During a GPS Activity, page 90).

Flashlight Select to turn on the LED flashlight.

Garmin Share Select to open the Garmin Share app (Garmin Share, page 91).

History Select to view your activity history, records, and totals.

52 Controls
Icon Name Description

Select to lock the buttons and the touchscreen to prevent inadvertent presses and
Lock Device
swipes.

Messenger Select to open the Messenger app (Using the Messenger Feature, page 95).

Music Select to control music playback on your watch or phone.

Select to view calls, texts, social network updates, and more, based on your phone
Notifications
notification settings (Enabling Phone Notifications, page 88).

Select to enable or disable Bluetooth technology and your connection to your

Phone
paired phone.

Power Off Select to turn off the watch.

Pulse Oximeter Select to open the pulse oximeter app (Pulse Oximeter, page 99).

Select to save your current location to navigate back to it later (Using the Saved
Save Location
App, page 12).

Settings Select to open the settings menu.

Select to enable or disable Sleep Mode (Customizing the Sleep Focus Mode,
Sleep Mode
page 96).

Stopwatch Select to start the stopwatch (Using the Stopwatch, page 76).

Select to turn on the LED flashlight strobe. You can create a custom strobe mode
Strobe
(Editing the Custom Flashlight Strobe, page 55).

Sunrise & Sunset Select to view sunrise, sunset, and twilight times.

Sync Select to sync your watch with your paired phone.

Time Sync Select to sync your watch with the time on your phone or using satellites.

Timer Select to set a countdown timer (Using the Countdown Timer, page 75).

Touch Select to enable or disable touchscreen controls.

Select to open your Garmin Pay wallet and pay for purchases with your watch
Wallet
(Garmin Pay, page 12).

Weather Select to view the current weather forecast and current conditions.

Wi-Fi Select to enable or disable Wi‑Fi communications.

®

Controls 53
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut menu options in the controls menu (Controls,
page 51).

1 Hold to open the controls menu.

2 Hold .
Select an option:
3
• To add a control to the menu, select Add Controls, and select a control to add.
To change the location of a shortcut in the controls menu, select Reorder Controls, select a control to
•
move, press or to move the control to a new position, and press to select the new location.
• To remove shortcut from the controls menu, select Remove Controls, and select a control to remove.

Using the LED Flashlight

WARNING
This device may have a flashlight that can be programmed to flash at various intervals. Consult your physician if
you have epilepsy or are sensitive to bright or flashing lights.
Using the flashlight can reduce battery life. You can reduce the brightness to extend the life of the battery.

1 Hold .
2 Select .

3 If necessary, press to turn on the flashlight.

Select an option:
4
• To adjust the brightness or color of the flashlight, press or .

TIP: From any screen, you can quickly press twice to turn on the flashlight. For the first three seconds,
you can press or to adjust the brightness or color of the flashlight.

• To program the flashlight to flash in a selected pattern, hold , select Strobe, select a mode, and press
.
To display your emergency contact information and program the flashlight to flash in a distress pattern,
•
hold , select Distress Pattern, and press .

CAUTION
Programming the flashlight to flash in a distress pattern will not contact your emergency contacts or emergency
services on your behalf. Your emergency contact information will only appear if it has been configured in the
Garmin Connect app.

54 Controls
Editing the Custom Flashlight Strobe
1 Hold .
2 Select > Custom.

3 Press to turn on the flashlight strobe (optional).

4 Select .

5 Press or to scroll to a strobe setting.

6 Press to scroll through the setting options.

7 Press to save.

Glances
Your watch comes preloaded with glances that provide quick information (Viewing Glances, page 58). Some
glances require a Bluetooth connection to a compatible phone.
Some glances are not visible by default. You can add them to the glances list manually (Customizing the
Glances List, page 59).

Glances 55
Name Description

ABC Displays combined altimeter, barometer, and compass information.

Alternate time Displays the current time of day in additional time zones (Adding Alternate Time Zones,
zones page 77).

At altitudes above 800 m (2625 ft.), displays graphs showing altitude-corrected values for
Altitude acclima­
your average pulse oximeter reading, respiration rate, and resting heart rate for the last
tion
seven days.

Altimeter Displays the approximate elevation based on pressure changes.

Barometer Displays the environmental pressure data based on elevation.

With all-day wear, displays your current Body Battery level and a graph of your level for the
Body Battery™
last several hours (Body Battery, page 59).

Calendar Displays upcoming meetings from your phone calendar.

Calories Displays your calorie information for the current day.

Compass Displays an electronic compass.

Countdowns Displays upcoming countdown events.

Displays your rider type, aerobic endurance, aerobic capacity, and anaerobic capacity
Cycling Ability
(Viewing Cycling Ability, page 72).

Displays your dog's location information when you have a compatible dog tracking device
Dog tracking
paired with your Enduro watch.

Displays a score, graph, and a short message that describes your overall endurance
Endurance score
based on all recorded activities (Endurance Score, page 71).

Displays predictions for the best days and times for fishing based on your location, the
Fish forecast moon's position, and the moon rise and set times. You can view the rating for the day and
major and minor feeding times.

Floors climbed Tracks your floors climbed and progress toward your goal.

Displays scheduled workouts when you select a Garmin coach adaptive training plan in
Garmin coach your Garmin Connect account. The plan adjusts to your current level of fitness, coaching
and schedule preferences, and race date.

Golf Displays golf scores and statistics for your last round.

Starts a Health Snapshot session on your watch that records several key health metrics
while you hold still for two minutes. It provides a glimpse of your overall cardiovascular
Health Snapshot status. The watch records metrics such as your average heart rate, stress level, and
respiration rate.
Displays summaries of your saved Health Snapshot sessions.

Displays your current heart rate in beats per minute (bpm) and a graph of your average
Heart rate
resting heart rate (RHR).

Displays a score, graph, contributing metrics, and a short message that describes your hill
Hill score
climbing performance based on your recorded running activities (Hill Score, page 72).

History Displays your activity history and a graph of your recorded activities.

Displays your seven-day average of your overnight heart rate variability (Heart Rate Varia­
HRV Status
bility Status, page 62).

56 Glances
Name Description

Tracks your time spent participating in moderate to vigorous activities, your weekly
Intensity minutes
intensity minutes goal, and progress toward your goal.

Allows you to send messages on your paired inReach device (Using the inReach Remote,
inReach controls
®

page 87).

Displays your internal clock during travel, and provides guidance to help you acclimate to
Jet Lag Adviser
the time zone of your destination (Using the Jet Lag Adviser, page 74).

Last activity Displays a brief summary of your last recorded activity.

Last ride
Last run Displays a brief summary of your last recorded activity and history of the specified sport.
Last swim

Displays your Garmin Messenger app conversations and allows you to reply to messages
Messenger
from your watch (Garmin Messenger App, page 95).

Displays the moonrise and moonset times, along with the moon phase, based on your
Moon phase
GPS position.

Music Provides music player controls for your phone or watch music.

Displays total nap time and Body Battery level gains. You can start the nap timer and set
Naps
an alarm to wake you up (Customizing the Sleep Focus Mode, page 96).

Alerts you to incoming calls, texts, social network updates, and more, based on your
Notifications
phone notification settings (Enabling Phone Notifications, page 88).

Displays performance measurements that help you track and understand your training
Performance
activities and race performances (Performance Measurements, page 60).

Displays the race event you designate as the primary race in your Garmin Connect
Primary race
calendar (Race Calendar and Primary Race, page 72).

Allows you to take a manual pulse oximeter reading (Getting Pulse Oximeter Readings,
Pulse oximeter page 100). If you are too active for the watch to determine your pulse oximeter reading,
the measurements are not recorded.

Displays your upcoming race events set in your Garmin Connect calendar (Race Calendar
Race calendar
and Primary Race, page 72).

RCT camera Allows you to manually take a photo and record a video clip (Using the Varia Camera
controls Controls, page 87).

Recovery Displays your recovery time. The maximum time is four days.

Your current respiration rate in breaths per minute and seven-day average. You can do a
Respiration
breathing activity to help you relax.

Displays total sleep time, a sleep score, and sleep stage information for the previous
Sleep score
night.

Provides recommendations for your sleep need based on sleep and activity history, HRV
Sleep coach
status, and naps.

Displays a graph of the intensity of solar input for the last 6 hours, and the average for the
Solar intensity
previous week.

Steps Tracks your daily step count, step goal, and data for previous days.

Glances 57
Name Description

Stocks Displays a customizable list of stocks (Adding a Stock, page 73).

Displays your current stress level and a graph of your stress level. You can do a breathing
Stress activity to help you relax. If you are too active for the watch to determine your stress level,
stress measurements are not recorded.

Displays sunrise, sunset, dawn, and dusk times, along with a map of the sun's current
Sunrise and sunset
position and a graph of the day's sunlight.

Temperature Displays temperature data from the internal temperature sensor.

Displays information about a tide station, such as the tide height and when the next high
Tides
and low tides will occur (Viewing Tide Information, page 14).

Displays a score and a short message that helps you determine how ready you are for
Training readiness
training each day (Training Readiness, page 71).

Displays your current training status and training load, which shows you how your training
Training status
affects your fitness level and performance (Training Status, page 67).

Displays the current temperature and weather forecast. You can also view the current
Weather
weather conditions on the map using several map overlays.

Displays laser location information when you have a compatible Xero device paired with
Xero device
®

your Enduro watch (Xero Laser Location Settings, page 88).

Viewing Glances
Glances provide quick access to health data, activity information, built-in sensors, and more. When you pair your
watch, you can view data from your phone, such as health information, weather, and calendar events.

1 From the watch face, press to scroll through the glances list.

TIP: You can also swipe to scroll or tap to select options.

2 Press to view more information.

Select an option:
3
• Press to view details about a glance.

• Press to view additional options and functions for a glance.

58 Glances
Customizing the Glances List
1 From the watch face, press to view the glances list.
2 Select Edit.
Select an option:
3
• To change the location of a glance in the list, select a glance, press or to move the glance, and
press to select the new location.
• To remove a glance from the list, select a glance, and select .
• To add a glance to the list, select Add, and select one or more glances.
TIP: You can select Create Folder to create a folder that contains multiple glances (Creating a Glances
Folder, page 59).

Creating a Glances Folder

You can customize the glances list to create folders of related glances.

1 From the watch face, press to view the glances list.

2 Select Edit > Add > Create Folder.
3 Select the glances to include in the folder, and select Done.
NOTE: If the glances are already in the glance list, you can move or copy them into the folder.
4 Select or enter a name for the folder.
5 Select an icon for the folder.
If necessary, select an option:
6
• To edit the folder, scroll to the folder in the glances list, and hold .
• To edit the glances in the folder, open the folder and select Edit (Customizing the Glances List, page 59) .

Body Battery
Your watch analyzes your heart rate variability, stress level, sleep quality, and activity data to determine your
overall Body Battery level. Like a gas gauge on a car, it indicates your amount of available reserve energy. The
Body Battery level range is from 5 to 100, where 5 to 25 is very low reserve energy, 26 to 50 is low reserve
energy, 51 to 75 is medium reserve energy, and 76 to 100 is high reserve energy.
You can sync your watch with your Garmin Connect account to view your most up-to-date Body Battery level,
long-term trends, and additional details (Tips for Improved Body Battery Data, page 59).

Tips for Improved Body Battery Data

• For more accurate results, wear the watch while sleeping.
• Good sleep charges your Body Battery.
• Strenuous activity and high stress can cause your Body Battery to drain more quickly.
• Food intake, as well as stimulants like caffeine, has no impact on your Body Battery.

Glances 59
Performance Measurements
These performance measurements are estimates that can help you track and understand your training activities
and race performances. The measurements require a few activities using wrist-based heart rate or a compatible
chest heart rate monitor. Cycling performance measurements require a heart rate monitor and a power meter.
These estimates are provided and supported by Firstbeat Analytics™. For more information, go to garmin.com
/performance-data/running.
NOTE: The estimates may seem inaccurate at first. The watch requires you to complete a few activities to learn
about your performance.
VO2 max.: VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram
of body weight at your maximum performance (About VO2 Max. Estimates, page 61).
Predicted race times: The watch uses the VO2 max. estimate and your training history to provide a target race
time based on your current state of fitness (Viewing Your Predicted Race Times, page 62).
HRV status: The watch analyzes your wrist heart rate readings while you are sleeping to determine your heart
rate variability (HRV) status based on your personal, long-term HRV averages (Heart Rate Variability Status,
page 62).
Performance condition: Your performance condition is a real-time assessment after 6 to 20 minutes of activity.
It can be added as a data field so you can view your performance condition during the rest of your activity. It
compares your real-time condition to your average fitness level (Performance Condition, page 62).
Functional threshold power (FTP): The watch uses your user profile information from the initial setup to
estimate your FTP. For a more accurate rating, you can conduct a guided test (Getting Your FTP Estimate,
page 63).
Lactate threshold: Lactate threshold requires a chest heart rate monitor. Lactate threshold is the point where
your muscles start to rapidly fatigue. Your watch measures your lactate threshold level using heart rate data
and pace (Lactate Threshold, page 64).
Stamina: The watch uses your VO2 max. estimate and heart rate data to provide real-time stamina estimates.
It can be added as a data screen so you can view your potential and current stamina during your activity
(Viewing Your Real-Time Stamina, page 66).
Power curve (cycling): The power curve displays your sustained power output over time. You can view your
power curve for the previous month, three months, or twelve months (Viewing Your Power Curve, page 66).

60 Glances
About VO2 Max. Estimates
VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram of body
weight at your maximum performance. In simple terms, VO2 max. is an indication of athletic performance
and should increase as your level of fitness improves. The Enduro device requires wrist-based heart rate or a
compatible chest heart rate monitor to display your VO2 max. estimate. The device has separate VO2 max.
estimates for running and cycling. You must run either outside with GPS or ride with a compatible power meter
at a moderate level of intensity for several minutes to get an accurate VO2 max. estimate.
On the device, your VO2 max. estimate appears as a number, description, and position on the color gauge. On
your Garmin Connect account, you can view additional details about your VO2 max. estimate, such as where it
ranks for your age and sex.

Purple Superior

Blue Excellent

Green Good

Orange Fair

Red Poor

VO2 max. data is provided by Firstbeat Analytics. VO2 max. analysis is provided with permission from The
Cooper Institute . For more information, see the appendix (VO2 Max. Standard Ratings, page 148), and go to
®

www.CooperInstitute.org.
Getting Your VO2 Max. Estimate for Running
This feature requires wrist-based heart rate or a compatible chest heart rate monitor. If you are using a chest
heart rate monitor, you must put it on and pair it with your watch (Pairing Your Wireless Sensors, page 85).
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 116), and set
your maximum heart rate (Setting Your Heart Rate Zones, page 117). The estimate may seem inaccurate at first.
The watch requires a few runs to learn about your running performance. You can disable VO2 max. recording
for ultra run and trail run activities if you do not want those run types to affect your VO2 max. estimate (Activity
Settings, page 45).
1 Start a running activity.
2 Run for at least 10 minutes outdoors.
3 After your run, select Save.

4 Press or to scroll through the performance measurements.

Getting Your VO2 Max. Estimate for Cycling

This feature requires a power meter and wrist-based heart rate or a compatible chest heart rate monitor. The
power meter must be paired with your watch (Pairing Your Wireless Sensors, page 85). If you are using a chest
heart rate monitor, you must put it on and pair it with your watch.
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 116) and set
your maximum heart rate (Setting Your Heart Rate Zones, page 117). The estimate may seem inaccurate at first.
The watch requires a few rides to learn about your cycling performance.
1 Start a cycling activity.
2 Ride at a steady, high intensity for at least 20 minutes.
3 After your ride, select Save.

4 Press or to scroll through the performance measurements.

Glances 61
Viewing Your Predicted Race Times
For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 116), and set
your maximum heart rate (Setting Your Heart Rate Zones, page 117).
Your watch uses the VO2 max. estimate and your training history to provide a target race time (About VO2 Max.
Estimates, page 61). The watch analyzes several weeks of your training data to refine the race time estimates.

1 From the watch face, press to view the performance glance.

2 Press .

3 Press or to view a predicted race time.

4 Press to view predictions for other distances.

NOTE: The predictions may seem inaccurate at first. The watch requires a few runs to learn about your
running performance.

Heart Rate Variability Status

Your watch analyzes your wrist heart rate readings while you are sleeping to determine your heart rate variability
(HRV). Training, physical activity, sleep, nutrition, and healthy habits all impact your heart rate variability. HRV
values can vary widely based on gender, age, and fitness level. A balanced HRV status may indicate positive
signs of health such as good training and recovery balance, greater cardiovascular fitness, and resilience to
stress. An unbalanced or poor status may be a sign of fatigue, greater recovery needs, or increased stress. For
best results, you should wear the watch while sleeping. The watch requires three weeks of consistent sleep data
to display your heart rate variability status.
Color Zone Status Description

Green Balanced Your seven-day average HRV is within your baseline range.

Orange Unbalanced Your seven-day average HRV is above or below your baseline range.

Red Low Your seven-day average HRV is well below your baseline range.

Poor Your HRV values are averaging well below the normal range for your age.
No color
No status No status means that there is insufficient data to generate a seven-day average.

You can sync your watch with your Garmin Connect account to view your current heart rate variability status,
trends, and educational feedback.

Performance Condition
As you complete your activity, such as running or cycling, the performance condition feature analyzes your pace,
heart rate, and heart rate variability to make a real-time assessment of your ability to perform compared to
your average fitness level. It is approximately your real-time percentage deviation from your baseline VO2 max.
estimate.
Performance condition values range from -20 to +20. After the first 6 to 20 minutes of your activity, the device
displays your performance condition score. For example, a score of +5 means that you are rested, fresh, and
capable of a good run or ride. You can add performance condition as a data field to one of your training screens
to monitor your ability throughout the activity. Performance condition can also be an indicator of fatigue level,
especially at the end of a long training run or ride.
NOTE: The device requires a few runs or rides with a heart rate monitor to get an accurate VO2 max. estimate
and learn about your running or riding ability (About VO2 Max. Estimates, page 61).

62 Glances
Viewing Your Performance Condition
This feature requires wrist-based heart rate or a compatible chest heart rate monitor.
1 Add Performance Condition to a data screen (Customizing the Data Screens, page 44).
2 Go for a run or ride.
After 6 to 20 minutes, your performance condition appears.
3 Scroll to the data screen to view your performance condition throughout the run or ride.

Getting Your FTP Estimate

Before you can get your functional threshold power (FTP) estimate, you must pair a chest heart rate monitor
and power meter with your watch (Pairing Your Wireless Sensors, page 85), and you must get your VO2 max.
estimate (Getting Your VO2 Max. Estimate for Cycling, page 61).
The watch uses your user profile information from the initial setup and your VO2 max. estimate to estimate your
FTP. The watch will automatically detect your FTP during rides at a steady, high intensity with heart rate and
power.

1 From the watch face, press to view the performance glance.

2 Press .

3 Press or to view your FTP estimate.

Your FTP estimate appears as a value measured in watts per kilogram, your power output in watts, and a
position on the color gauge.

Purple Superior

Blue Excellent

Green Good

Orange Fair

Red Untrained

For more information, see the appendix (FTP Ratings, page 149).
NOTE: When a performance notification alerts you to a new FTP, you can select Accept to save the new FTP,
or Decline to keep your current FTP.

Glances 63
Conducting an FTP Test
Before you can conduct a test to determine your functional threshold power (FTP), you must pair a chest heart
rate monitor and a power meter with your device (Pairing Your Wireless Sensors, page 85), and you must get
your VO2 max. estimate (Getting Your VO2 Max. Estimate for Cycling, page 61).
NOTE: The FTP test is a challenging workout that takes about 30 minutes to complete. Choose a practical and
mostly flat route that allows you to ride at a steadily increasing effort, similar to a time trial.

1 From the watch face, select .

2 Select a cycling activity.

3 Hold .
4 Select Training > Workout Library > FTP Guided Test.
5 Follow the on-screen instructions.
After you begin your ride, the device displays each step duration, the target, and current power data. A
message appears when the test is complete.
6 After you complete the guided test, complete the cool down, stop the timer, and save the activity.
Your FTP appears as a value measured in watts per kilogram, your power output in watts, and a position on
the color gauge.
7 Select an option:
• Select Accept to save the new FTP.
• Select Decline to keep your current FTP.

Lactate Threshold
Lactate threshold is the exercise intensity at which lactate (lactic acid) starts to accumulate in the bloodstream.
In running, this intensity level is estimated in terms of pace, heart rate, or power. When a runner exceeds the
threshold, fatigue starts to increase at an accelerating rate. For experienced runners, the threshold occurs at
approximately 90% of their maximum heart rate and between 10 km and half-marathon race pace. For average
runners, the lactate threshold often occurs well below 90% of maximum heart rate. Knowing your lactate
threshold can help you determine how hard to train or when to push yourself during a race.
If you already know your lactate threshold heart rate value, you can enter it in your user profile settings (Setting
Your Heart Rate Zones, page 117). You can turn on the Auto Detection feature to automatically record your
lactate threshold during an activity.

64 Glances
Performing a Guided Test to Determine Your Lactate Threshold
This feature requires a Garmin chest heart rate monitor. Before you can perform the guided test, you must put
on a heart rate monitor and pair it with your watch (Pairing Your Wireless Sensors, page 85).
The watch uses your user profile information from the initial setup and your VO2 max. estimate to estimate
your lactate threshold. The watch will automatically detect your lactate threshold during runs at a steady, high
intensity with heart rate.
TIP: The watch requires a few runs with a chest heart rate monitor to get an accurate maximum heart rate value
and VO2 max. estimate. If you are having trouble getting a lactate threshold estimate, try manually lowering your
maximum heart rate value.

1 From the watch face, press .

2 Select an outdoor running activity.
GPS is required to complete the test.

3 Hold .
4 Select Training > Workout Library > Lactate Threshold Guided Test.

5 Press to start the activity timer, and follow the on-screen instructions.
After you begin your run, the watch displays each step duration, the target, and current heart rate data. A
message appears when the test is complete.
6 After you complete the guided test, stop the activity timer and save the activity.
If this is your first lactate threshold estimate, the watch prompts you to update your heart rate zones based
on your lactate threshold heart rate. For each additional lactate threshold estimate, the watch prompts you to
accept or decline the estimate.

Glances 65
Viewing Your Real-Time Stamina
Your watch can provide real-time stamina estimates based on your heart rate data and VO2 max. estimate
(About VO2 Max. Estimates, page 61).

1 From the watch face, press .

2 Select Activities.
3 Select a run or bike activity.

4 Press .
5 Select Activity Options > Data Screens > Add New > Stamina.

6 Press or to change the location of the data screen (optional).

7 Press to edit the primary stamina data field (optional).

8 Start your activity (Starting an Activity, page 17).

9 Press or to scroll to the data screen.

Primary stamina data field. Shows your current stamina percentage, distance remaining, or time
remaining.

Potential stamina.

Current stamina.

Red: Stamina is depleting.

Orange: Stamina is steady.

Green: Stamina is recharging.

Viewing Your Power Curve

Before you can view your power curve, you must record a ride that's at least one hour long using a power meter
in the last 90 days (Pairing Your Wireless Sensors, page 85).
You can create workouts in your Garmin Connect account. The power curve displays your sustained power
output over time. You can view your power curve for the previous month, three months, or twelve months.
1 From the Garmin Connect app, select .
2 Select Performance Stats > Power Curve.

66 Glances
Training Status
These measurements are estimates that can help you track and understand your training activities. The
measurements require you to complete activities for two weeks using wrist-based heart rate or a compatible
chest heart rate monitor. Cycling performance measurements require a heart rate monitor and a power meter.
The measurements may seem inaccurate at first when the watch is still learning about your performance.
These estimates are provided and supported by Firstbeat Analytics. For more information, go to garmin.com
/performance-data/running.
Training status: Training status shows you how your training affects your fitness and performance. Your
training status is based on changes to your VO2 max., acute load, and HRV status over an extended time
period.
VO2 max.: VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram
of body weight at your maximum performance (About VO2 Max. Estimates, page 61). Your watch displays
heat and altitude corrected VO2 max. values when you are acclimating to high heat environments or high
altitude (Heat and Altitude Performance Acclimation, page 70).
HRV: HRV is your heart rate variability status over the last seven days (Heart Rate Variability Status, page 62).
Acute load: Acute load is a weighted sum of your recent exercise load scores including exercise duration and
intensity. (Acute Load, page 68).
Training load focus: Your watch analyzes and distributes your training load into different categories based on
the intensity and structure of each activity recorded. Training load focus includes the total load accumulated
per category, and the focus of the training. Your watch displays your load distribution over the last 4 weeks
(Training Load Focus, page 68).
Recovery time: The recovery time displays how much time remains before you are fully recovered and ready for
the next hard workout (Recovery Time, page 70).

Training Status Levels

Training status shows you how your training affects your fitness level and performance. Your training status is
based on changes to your VO2 max., acute load, and HRV status over an extended time period. You can use
your training status to help plan future training and continue improving your fitness level.
No Status: The watch needs you to record multiple activities over two weeks, with VO2 max. results from
running or cycling, to determine your training status.
Detraining: You have a break in your training routine or you are training much less than usual for a week
or more. Detraining means that you are unable to maintain your fitness level. You can try increasing your
training load to see improvement.
Recovery: Your lighter training load is allowing your body to recover, which is essential during extended periods
of hard training. You can return to a higher training load when you feel ready.
Maintaining: Your current training load is enough to maintain your fitness level. To see improvement, try adding
more variety to your workouts or increasing your training volume.
Productive: Your current training load is moving your fitness level and performance in the right direction. You
should plan recovery periods into your training to maintain your fitness level.
Peaking: You are in ideal race condition. Your recently reduced training load is allowing your body to recover
and fully compensate for earlier training. You should plan ahead, since this peak state can only be maintained
for a short time.
Overreaching: Your training load is very high and counterproductive. Your body needs a rest. You should give
yourself time to recover by adding lighter training to your schedule.
Unproductive: Your training load is at a good level, but your fitness is decreasing. Try focusing on rest, nutrition,
and stress management.
Strained: There is imbalance between your recovery and training load. It is a normal result after a hard training
or major event. Your body may be struggling to recover, so you should pay attention to your overall health.

Glances 67
Tips for Getting Your Training Status
The training status feature depends on updated assessments of your fitness level, including at least one VO2
max. measurement per week (About VO2 Max. Estimates, page 61). Indoor run activities do not generate a VO2
max. estimate in order to preserve the accuracy of your fitness level trend. You can disable VO2 max. recording
for ultra run and trail run activities if you do not want those run types to affect your VO2 max. estimate (Activity
Settings, page 45).
To get the most out of the training status feature, you can try these tips.
• At least one time per week, run or ride outdoors with a power meter, and reach a heart rate higher than 70% of
your maximum heart rate for at least 10 minutes.
After using the watch for one or two weeks, your training status should be available.
• Record all of your fitness activities on your primary training device, allowing your watch to learn about your
performance (Syncing Activities and Performance Measurements, page 93).
• Wear the watch consistently while you sleep, to continue generating an up-to-date HRV status. Having a valid
HRV status can help maintain a valid training status when you do not have as many activities with VO2 max.
measurements.

Acute Load
Acute load is a weighted sum of your excess post-exercise oxygen consumption (EPOC) for the last several
days. The gauge indicates whether your current load is low, optimal, high, or very high. The optimal range is
based on your individual fitness level and training history. The range adjusts as your training time and intensity
increase or decrease.
Training Load Focus
In order to maximize performance and fitness gains, training should be distributed across three categories: low
aerobic, high aerobic, and anaerobic. Training load focus shows you how much of your training is currently in
each category and provides training targets. Training load focus requires at least 7 days of training to determine
if your training load is low, optimal, or high. After 4 weeks of training history, your training load estimate will
have more detailed target information to help you balance your training activities.
Below targets: Your training load is lower than optimal in all intensity categories. Try increasing the duration or
frequency of your workouts.
Low aerobic shortage: Try adding more low aerobic activities to provide recovery and balance for your higher
intensity activities.
High aerobic shortage: Try adding more high aerobic activities to help improve your lactate threshold and VO2
max. over time.
Anaerobic shortage: Try adding a few more intense, anaerobic activities to improve your speed and anaerobic
capacity over time.
Balanced: Your training load is balanced and provides all-around fitness benefits as you continue training.
Low aerobic focus: Your training load is mostly low aerobic activity. This provides a solid foundation and
prepares you for adding more intense workouts.
High aerobic focus: Your training load is mostly high aerobic activity. These activities help to improve lactate
threshold, VO2 max., and endurance.
Anaerobic focus: Your training load is mostly intense activity. This leads to rapid fitness gains, but should be
balanced with low aerobic activities.
Above targets: Your training load is higher than optimal, and you should consider scaling back the duration and
frequency of your workouts.
Load Ratio
Load ratio is the ratio of your acute (short-term) training load to your chronic (long-term) training load. It's
helpful for tracking your training load changes.

68 Glances
Status Value Description

No Status None Load ratio will be visible after 2 weeks of training.

Low Lower than 0.8 Your short-term training load is lower than your long-term training load.

The short-term and long-term training loads are balanced. The optimal range is
Optimal 0.8 to 1.4
based on your individual fitness level and training history.

High 1.5 to 1.9 Your short-term training load is higher than your long-term training load.

Your short-term training load is significantly higher than your long-term training
Very High 2.0 or higher
load.

About Training Effect

Training Effect measures the impact of an activity on your aerobic and anaerobic fitness. Training Effect
accumulates during the activity. As the activity progresses, the Training Effect value increases. Training Effect
is determined by your user profile information and training history, and heart rate, duration, and intensity of your
activity. There are seven different Training Effect labels to describe the primary benefit of your activity. Each
label is color coded and corresponds to your training load focus (Training Load Focus, page 68). Each feedback
phrase, for example, "Highly Impacting VO2 Max." has a corresponding description in your Garmin Connect
activity details.
Aerobic Training Effect uses your heart rate to measure how the accumulated intensity of an exercise affects
your aerobic fitness and indicates if the workout had a maintaining or improving effect on your fitness level.
Your excess post-exercise oxygen consumption (EPOC) accumulated during exercise is mapped to a range of
values that account for your fitness level and training habits. Steady workouts at moderate effort or workouts
involving longer intervals (>180 seconds) have a positive impact on your aerobic metabolism and result in an
improved aerobic Training Effect.
Anaerobic Training Effect uses heart rate and speed (or power) to determine how a workout affects your ability
to perform at very high intensity. You receive a value based on the anaerobic contribution to EPOC and the
type of activity. Repeated high-intensity intervals of 10 to 120 seconds have a highly beneficial impact on your
anaerobic capability and result in an improved anaerobic Training Effect.
You can add Aerobic Training Effect and Anaerobic Training Effect as data fields to one of your training screens
to monitor your numbers throughout the activity.

Training Effect Aerobic Benefit Anaerobic Benefit

From 0.0 to 0.9 No benefit. No benefit.

From 1.0 to 1.9 Minor benefit. Minor benefit.

From 2.0 to 2.9 Maintains your aerobic fitness. Maintains your anaerobic fitness.

From 3.0 to 3.9 Impacts your aerobic fitness. Impacts your anaerobic fitness.

From 4.0 to 4.9 Highly impacts your aerobic fitness. Highly impacts your anaerobic fitness.

Overreaching and potentially harmful without Overreaching and potentially harmful without
5.0
enough recovery time. enough recovery time.

Training Effect technology is provided and supported by Firstbeat Analytics. For more information, go to
firstbeat.com.

Glances 69
Recovery Time
You can use your Garmin device with wrist-based heart rate or a compatible chest heart rate monitor to display
how much time remains before you are fully recovered and ready for the next hard workout.
NOTE: The recovery time recommendation uses your VO2 max. estimate and may seem inaccurate at first. The
device requires you to complete a few activities to learn about your performance.
The recovery time appears immediately following an activity. The time counts down until it is optimal for you to
attempt another hard workout. The device updates your recovery time throughout the day based on changes in
sleep, stress, relaxation, and physical activity.
Recovery Heart Rate
If you are training with wrist-based heart rate or a compatible chest heart rate monitor, you can check your
recovery heart rate value after each activity. Recovery heart rate is the difference between your exercising heart
rate and your heart rate two minutes after the exercise has stopped. For example, after a typical training run,
you stop the timer. Your heart rate is 140 bpm. After two minutes of no activity or cool down, your heart rate
is 90 bpm. Your recovery heart rate is 50 bpm (140 minus 90). Some studies have linked recovery heart rate to
cardiac health. Higher numbers generally indicate healthier hearts.
TIP: For best results, you should stop moving for two minutes while the device calculates your recovery heart
rate value.
NOTE: Your recovery heart rate is not calculated for low-impact activities, such as yoga.

Heat and Altitude Performance Acclimation

Environmental factors such as high temperature and altitude impact your training and performance. For
example, high altitude training can have a positive impact on your fitness, but you may notice a temporary
VO2 max. decline while exposed to high altitudes. Your Enduro watch provides acclimation notifications and
corrections to your VO2 max. estimate and training status when the temperature is above 22ºC (72ºF) and when
the altitude is above 800 m (2625 ft.). You can keep track of your heat and altitude acclimation in the training
status glance.
NOTE: The heat acclimation feature is available only for GPS activities and requires weather data from your
connected phone.

Pausing and Resuming Your Training Status

If you are injured or sick, you can pause your training status. You can continue to record fitness activities,
but your training status, training load focus, recovery feedback, and workout recommendations are temporarily
disabled.
You can resume your training status when you are ready to start training again. For best results, you need at
least one VO2 max. measurement each week (About VO2 Max. Estimates, page 61).
When you want to pause your training status, select an option:
1
• From the training status glance, hold , and select Options > Pause Training Status.
• From your Garmin Connect settings, select Performance Stats > Training Status > > Pause Training
Status.
2 Sync your watch with your Garmin Connect account.
When you want to resume your training status, select an option:
3
• From the training status glance, hold , and select Options > Resume Training Status.
• From your Garmin Connect settings, select Performance Stats > Training Status > > Resume Training
Status.
4 Sync your watch with your Garmin Connect account.

70 Glances
Training Readiness
Your training readiness is a score and a short message that helps you determine how ready you are for training
each day. The score is continuously calculated and updated throughout the day using these factors:
• Sleep score (last night)
• Recovery time
• HRV status
• Acute load
• Sleep history (last 3 nights)
• Stress history (last 3 days)

Color Zone Score Description

Prime
Purple 95 to 100
Best possible

High
Blue 75 to 94
Ready for challenges

Moderate
Green 50 to 74
Good to go

Low
Orange 25 to 49
Time to slow down

Poor
Red 1 to 24
Let your body recover

To see your training readiness trends over time, go to your Garmin Connect account.

Endurance Score
Your endurance score helps you understand your overall endurance based on all recorded activities with heart
rate data. You can view recommendations for improving your endurance score, and the top sports contributing
to your score over time.

Color Zone Description

Pink Elite

Purple Superior

Blue Expert

Green Well Trained

Yellow Trained

Orange Intermediate

Red Recreational

For more information, see the appendix (Endurance Score Ratings, page 150).

Glances 71
Hill Score
Your hill score helps you understand your current capacity for uphill running based on your training history
and VO2 max. estimate. Your watch detects uphill segments with 2% grade or more during an outdoor running
activity. You can view your hill endurance, hill strength, and changes to your hill score over time.

Color Zone Score Description

Pink 95 to 100 Elite

Purple 85 to 94 Expert

Blue 70 to 84 Skilled

Green 50 to 69 Trained

Orange 25 to 49 Challenger

Red 1 to 24 Recreational

Viewing Cycling Ability

Before you can view your cycling ability, you must have a 7-day training history, VO2 max. data recorded in your
user profile (About VO2 Max. Estimates, page 61), and power curve data from a paired power meter (Viewing
Your Power Curve, page 66).
Cycling ability is a measurement of your performance across three categories: aerobic endurance, aerobic
capacity, and anaerobic capacity. Cycling ability includes your current rider type, such as climber. Information
you enter in your user profile, such as body weight, also helps determine your rider type (Setting Up Your User
Profile, page 116).

1 From the watch face, press to view the cycling ability glance.
NOTE: You may need to add the glance to your glances list (Customizing the Glances List, page 59).

2 Press to view your current rider type.

3 Press to view a detailed analysis of your cycling ability (optional).

Race Calendar and Primary Race

When you add a race event to your Garmin Connect calendar, you can view the event on your watch by adding
the primary race glance (Glances, page 55). The event date must be in the next 365 days. The watch displays a
countdown to the event, your goal time or predicted finish time (running events only), and weather information.
NOTE: Historical weather information for the location and date is available right away. Local forecast data
appears approximately 14 days before the event.
If you add more than one race event, you are prompted to choose a primary event.
Depending on the available course data for your event, you can view elevation data, the course map, and add a
PacePro plan (PacePro™ Training, page 31).

72 Glances
Training for a Race Event
Your watch can suggest daily workouts to help you train for a running or cycling event, if you have a VO2 max.
estimate (About VO2 Max. Estimates, page 61).
1 On your phone or computer, go to your Garmin Connect calendar.
2 Select the day of the event, and add the race event.
You can search for an event in your area or create your own event.
3 Add details about the event, and add the course if it's available.
4 Sync your watch with your Garmin Connect account.
5 On your watch, scroll to the primary event glance to see a countdown to your primary race event.

6 From the watch face, press , and select a running or cycling activity.
NOTE: If you have completed at least one outdoor run with heart rate data or one ride with heart rate and
power data, daily suggested workouts appear on your watch.

Adding a Stock
Before you can customize the stocks list, you must add the stocks glance to the glances list (Customizing the
Glances List, page 59).

1 From the watch face, press to view the stocks glance.

2 Press .
3 Select Edit > Add.
4 Enter the company name or stock symbol for the stock you want to add, and select .
The watch displays search results.
5 Select the stock you want to add.
Select the stock to view more information.
6
TIP: To display the stock on the glances list, you can press , and select Set as Favorite.

Adding Weather Locations

1 From the watch face, press to view the weather glance.

2 Press .

3 On the first glance screen, press .

4 Select Add Location, and search for a location.
5 If necessary, repeat steps 3 and 4 to add more locations.

6 Press , and select a location to show the weather for that location.

Glances 73
Using the Jet Lag Adviser
Before you can use the Jet Lag Adviser glance, you must plan a trip in the Garmin Connect app (Planning a Trip
in the Garmin Connect App, page 74).
You can use the Jet Lag Adviser glance while traveling to see how your internal clock compares to the local
time, and to receive guidance on how to reduce the effects of jet lag.

1 From the watch face, press to view the Jet Lag Adviser glance.

2 Press to see how your internal clock compares to the local time, and the overall level of your jet lag.
Select an option:
3
• To see an informational message about your current jet lag level, press .

• To see a timeline for recommended actions to help reduce symptoms of jet lag, press .

Planning a Trip in the Garmin Connect App

1 From the Garmin Connect app, select .
2 Select Training & Planning > Jet Lag Adviser > Add Trip Details.
3 Follow the on-screen instructions.

Clocks
Setting an Alarm
You can set multiple alarms.
Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
2 Select Clocks > Alarms.
3 Select an option:
• To set and save an alarm for the first time, enter the alarm time.
• To set and save additional alarms, select Add Alarm, and enter the alarm time.

74 Clocks
Editing an Alarm
Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
2 Select Clocks > Alarms.
3 Select an alarm.
4 Select an option:
• To turn the alarm on or off, select Status.
• To change the alarm time, select Time.
• To set the alarm to repeat regularly, select Repeat, and select when the alarm should repeat.
• To select the type of alarm notification, select Sound & Vibe.
• To turn the backlight on or off with the alarm, select Backlight.
• To select a description for the alarm, select Label.
• To delete the alarm, select Delete.

Using the Countdown Timer

Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
2 Select Clocks > Timers.
Select an option:
3
• To set a countdown timer for the first time, enter the time using the touchscreen or the and
buttons.
• To set a countdown timer without saving it, select Quick Timer, and enter the time.
• To set and save a new countdown timer, select Edit > Add Timer, and enter the time.
• To set a saved countdown timer, select the saved timer.

4 Press to start the timer.

5 If necessary, select an option:
• To stop the timer, select .
• To restart the timer, select .
• To save the timer, select > Save Timer.
• To automatically restart the timer after it expires, select > Auto Restart.
• To customize the timer notification, select > Sound & Vibe.

Clocks 75
Deleting a Countdown Timer
Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
2 Select Clocks > Timers > Edit.
3 Select a timer.
4 Select Delete.

Using the Stopwatch

Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
2 Select Clocks > Stopwatch.

3 Press to start the timer.

4 Press to restart the lap timer .

The total stopwatch time continues running.

76 Clocks
5 Press to stop both timers.
Select an option:
6
• To reset both timers, press .

• To save the stopwatch time as an activity, press , and select Save Activity.

• To reset the timers and exit the stopwatch, press , and select Done.

• To review the lap timers, press , and select Review.

NOTE: The Review option only appears if there have been multiple laps.

• To return to the watch face without resetting the timers, press , and select Go to Watchface.

• To enable or disable lap recording, press , and select Lap Key.

Adding Alternate Time Zones

You can display the current time of day in additional time zones.
Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
TIP: You can also view your alternate time zones in the glances list (Customizing the Glances List, page 59).
2 Select Clocks > Alt. Time Zones > Add.

3 Press or to highlight a region, and press to select it.

4 Select a time zone.

Editing an Alternate Time Zone

Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
TIP: You can also view your alternate time zones in the glances list (Customizing the Glances List, page 59).
2 Select Clocks > Alt. Time Zones.
3 Select a time zone.

4 Press .
5 Select an option:
• To set the time zone to display on the glances list, select Set as Favorite.
• To enter a custom name for the time zone, select Rename.
• To enter a custom abbreviation for the time zone, select Abbreviate.
• To change the time zone, select Change Zone.
• To delete the time zone, select Delete.

Clocks 77
Adding a Countdown Event
Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
TIP: You can also view your countdown events in the glances list (Customizing the Glances List, page 59).
2 Select Clocks > Countdowns > Add.
3 Enter a name.
4 Select a year, month, and day.
5 Select an option:
• Select All Day.
• Select Specific Time, and enter a time.
6 Select an icon.

Editing a Countdown Event

Select an option:
1
• From the watch face, hold .

• From the watch face, press .

• Hold .
TIP: You can also view your countdown events in the glances list (Customizing the Glances List, page 59).
2 Select Clocks > Countdowns.
3 Select a countdown event.

4 Press , and select Set as Favorite to show the countdown event in the glances list (optional).

5 Press , and select Edit Countdown.

6 Select an option to edit:
• To rename the event, select Name.
• To change the date, select Date.
• To change the time, select Time.
• To change the event type, select Type.
• To add an abbreviated name for the event, select Abbreviation.
• To add an event location, select Location.
• To add event reminders, select Reminders.
• To repeat the event every year, select Repeat Annually.
• To remove the event, select Delete Countdown.

History
History includes time, distance, calories, average pace or speed, lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is overwritten.

78 History
Using History
History contains saved activity data, records, and totals.
The watch has a history glance for quick access to your activity data (Glances, page 55).

1 From the watch face, hold .

2 Select History.
A bar graph of your recent activities appears.
Select an option:
3
• To change the time period for the bar graph, press , and select Graph Options.

• To view your personal records by sport, press , and select Records (Personal Records, page 79).

• To view your weekly or monthly totals, press , and select Totals (Viewing Data Totals, page 80).

• To view your activity history, press , and select an activity.

Multisport History
Your device stores the overall multisport summary of the activity, including overall distance, time, calories, and
optional accessory data. Your device also separates the activity data for each sport segment and transition so
you can compare similar training activities and track how quickly you move through the transitions. Transition
history includes distance, time, average speed, and calories.

Personal Records
When you complete an activity, the watch displays any new personal records you achieved during that activity.
Personal records include your fastest time over several typical race distances, highest strength activity weight
for major movements, and longest run, ride, or swim.
NOTE: For cycling, personal records also include most ascent and best power (power meter required).

Viewing Your Personal Records

1 From the watch face, hold .
2 Select History.

3 Press , and select Records.

4 Select a sport.
5 Select a record.
6 Select View Record.

Restoring a Personal Record

You can set each personal record back to the one previously recorded.

1 From the watch face, hold .

2 Select History.

3 Press , and select Records.

4 Select a sport.
5 Select a record to restore.
6 Select Previous > .
NOTE: This does not delete any saved activities.

History 79
Clearing Personal Records
1 From the watch face, hold .
2 Select History.

3 Press , and select Records.

4 Select a sport.
5 Select an option:
• To delete one record, select a record, and select Clear Record > .
• To delete all records for the sport, select Clear All Records > .
NOTE: This does not delete any saved activities.

Viewing Data Totals

You can view the accumulated distance and time data saved to your watch.

1 From the watch face, hold .

2 Select History.

3 Press , and select Totals.

4 Select an activity.
5 Select an option to view weekly or monthly totals.

Notifications and Alerts Settings

From the watch face, hold , and select Watch Settings > Notifications & Alerts.
Smart Notifications: Customizes the smart notifications that appear on your watch (Enabling Phone
Notifications, page 88).
Health & Wellness: Customizes the health and wellness alerts that appear on your watch (Health and Wellness
Alerts, page 81).
Morning Report: Shows the morning report and customizes the data in the report (Customizing Your Morning
Report, page 81).
System Alerts: Sets time (Setting Time Alerts, page 82), barometer (Setting a Storm Alert, page 82), or phone
connection alerts (Turning On Phone Connection Alerts, page 82).
Notification Center: Enables the notification center for viewing new notifications (Viewing Notifications,
page 89).

80 Notifications and Alerts Settings

Health and Wellness Alerts
From the watch face, hold , and select Watch Settings > Notifications & Alerts > Health & Wellness.
Daily Summary: A Body Battery daily summary appears a few hours before the start of your sleep window. The
daily summary provides insight on how your daily stress and activity history impacted your Body Battery level
(Body Battery, page 59).
Stress Alerts: Notifies you when periods of stress have drained your Body Battery level.
Rest Alerts: Notifies you after you have a restful period and its impact on your Body Battery level.
Abnormal Heart Rate Alerts: Notifies you when your heart rate exceeds or drops below a target value (Setting an
Abnormal Heart Rate Alert, page 81).
Jet Lag Adviser: Provides jet lag symptom advice for a trip, such as sleep and exercise recommendations
(Using the Jet Lag Adviser, page 74).
Move Alert: Reminds you to keep moving (Using the Move Alert, page 101).
Goal Alerts: Notifies you when you reach your daily steps goal, daily floors climbed goal, and weekly intensity
minutes goal.

Setting an Abnormal Heart Rate Alert

CAUTION
This feature only alerts you when your heart rate exceeds or drops below a certain number of beats per minute,
as selected by the user, after a period of inactivity. This feature does not notify you when your heart rate drops
below the selected threshold during your chosen sleep window configured in the Garmin Connect app. This
feature does not notify you of any potential heart condition and is not intended to treat or diagnose any medical
condition or disease. Always defer to your health care provider for any heart-related issues.
You can set the heart rate threshold value.

1 From the watch face, hold .

2 Select Watch Settings > Notifications & Alerts > Health & Wellness > Abnormal Heart Rate Alerts.
3 Select High Alert or Low Alert.
4 Set the heart rate threshold value.
Each time your heart rate exceeds or drops below the threshold value, a message appears and the watch
vibrates.

Morning Report
Your watch displays a morning report based on your normal wake time. Press to view the report, which
includes weather, sleep, overnight heart rate variability status, and more (Customizing Your Morning Report,
page 81).

Customizing Your Morning Report

NOTE: You can customize these settings on your watch or in your Garmin Connect account.

1 From the watch face, hold .

2 Select Watch Settings > Notifications & Alerts > Morning Report.
3 Select an option:
• Select Show Report to enable or disable the morning report.
• Select Edit Report to customize the order and type of data that appears in your morning report.

Notifications and Alerts Settings 81

Setting Time Alerts
1 From the watch face, hold .
2 Select Watch Settings > Notifications & Alerts > System Alerts > Time.
3 Select an option:
• To set an alert to sound a specific number of minutes or hours before the actual sunset occurs, select Til
Sunset > Status > On, select Time, and enter the time.
• To set an alert to sound a specific number of minutes or hours before the actual sunrise occurs, select Til
Sunrise > Status > On, select Time, and enter the time.
• To set an alert to sound every hour, select Hourly > On.

Setting a Storm Alert

WARNING
This alert is an informational feature and is not intended to be the primary source for tracking changes
in the weather. It is your responsibility to review weather reports and conditions, to remain aware of your
surroundings, and to use safe judgment, especially during times of severe weather. Failure to heed this warning
could result in serious personal injury or death.

1 From the watch face, hold .

2 Select Watch Settings > Notifications & Alerts > System Alerts > Barometer > Storm Alert.
3 Select an option:
• Select Status to turn the alert on or off.
• Select Rate to update the rate of barometric pressure change that triggers a storm alert.

Turning On Phone Connection Alerts

You can set your watch to alert you when your paired phone connects and disconnects using Bluetooth
technology.

1 From the watch face, hold .

2 Select Watch Settings > Notifications & Alerts > System Alerts > Phone.

Sound and Vibration Settings

From the watch face, hold , and select Watch Settings > Sound & Vibe.
Button Tones: Plays a tone when you press a button.
Vibration: Sets watch vibrations for alerts and button presses.

Display and Brightness Settings

From the watch face, hold , and select Watch Settings > Display & Brightness.
Backlight: Sets the brightness level of the screen.
Text Size: Adjusts the size of the text on the screen.
Gesture: Turns on the screen when you raise and turn your arm to look at your wrist.
Keys & Touch: Turns on the screen for button presses and screen taps.
Timeout: Sets the length of time before the screen turns off.
Touch: Enables the touchscreen. You can select Map Only to enable the touchscreen only on the map screen.
Touch Lock: Locks the touchscreen after the screen turns off. When this setting is enabled, you can swipe down
to unlock the touchscreen.

82 Sound and Vibration Settings

 Connectivity
Connectivity features are available for your watch when you pair with your compatible phone (Pairing
Your Phone, page 88). Additional features are available when you connect your watch to a Wi‑Fi network
(Connecting to a Wi‑Fi Network, page 90).

Sensors and Accessories

The Enduro watch has several internal sensors, and you can pair additional wireless sensors for your activities.

Wireless Sensors
Your watch can be paired and used with wireless sensors using ANT+ or Bluetooth technology (Pairing
Your Wireless Sensors, page 85). After the devices are paired, you can customize the optional data fields
(Customizing the Data Screens, page 44). If your watch was packaged with a sensor, they are already paired.
For information about specific Garmin sensor compatibility, purchasing, or to view the owner's manual, go to
buy.garmin.com for that sensor.

Connectivity 83
Sensor Type Description

You can use Approach golf club sensors to automatically track your golf shots, including
Club Sensors
location, distance, and club type.

DogTrack Allows you to receive data from a compatible handheld dog tracking device.

You can use your watch with your eBike and view bike data, such as battery and range
eBike
information, during your rides.

Extended You can use the Extended Display mode to display data screens from your Enduro watch on a
Display compatible Edge bike computer during a ride or triathlon.
®

You can use an external sensor, such as the HRM-Pro series or HRM-Fit™ heart rate monitor,
External HR to view heart rate data during your activities. Some heart rate monitors can also store data or
provide advanced running data (Running Dynamics, page 86) (Running Power, page 86).

You can use a foot pod to record pace and distance instead of using GPS when you are
Foot Pod
training indoors or when your GPS signal is weak.

You can use Bluetooth headphones to listen to music loaded onto your Enduro watch
Headphones
(Connecting Bluetooth Headphones, page 115).

The inReach remote function allows you to control your inReach satellite communicator using
inReach
your Enduro watch (Using the inReach Remote, page 87).

Lights You can use Varia™ smart bike lights to improve situational awareness.

You can use the Rally™ or Vector™ power meter bike pedals to view your power data on your
watch. You can adjust your power zones to match your goals and abilities (Setting Your Power
Power
Zones, page 118), or use range alerts to be notified when you reach a specified power zone
(Setting an Alert, page 48).

You can use a Varia rearview bike radar to improve situational awareness and send alerts
Radar about approaching vehicles. With a Varia radar camera tail light, you can also take photos and
record video during a ride (Using the Varia Camera Controls, page 87).

Rangefinder You can use a compatible laser rangefinder to view your distance to the flag while golfing.

You can use a Running Dynamics Pod to record running dynamics data and view it on your
RD Pod
watch (Running Dynamics, page 86).

You can use electronic shifters to display shifting information during a ride. The Enduro watch
Shifting
displays current adjustment values when the sensor is in adjustment mode.

You can use Shimano Di2™ electronic shifters to display shifting information during a ride.
®

Shimano Di2 The Enduro watch displays current adjustment values when the sensor is in adjustment
mode.

You can use your watch with an indoor bike smart trainer to simulate resistance while
Smart Trainer
following a course, ride, or workout (Using an Indoor Trainer, page 35).

You can attach speed or cadence sensors to your bike and view the data during your ride. If
Spd./Cad. necessary, you can manually enter your wheel circumference (Wheel Size and Circumference,
page 151).

You can attach the tempe™ temperature sensor to a secure strap or loop where it is exposed
Tempe
to ambient air, so it provides a consistent source of accurate temperature data.

You can use your device as a remote control for your Garmin trolling motor (Pairing Your
Trolling Motor
Watch and Trolling Motor, page 15).

84 Connectivity
Sensor Type Description

XERO Laser You can view and share laser location information from a Xero device (Xero Laser Location
Locations Settings, page 88).

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or install the sensor.
The first time you connect a wireless sensor to your watch using ANT+ or Bluetooth technology, you must pair
the watch and sensor. If the sensor has both ANT+ and Bluetooth technology, Garmin recommends that you
pair using ANT+ technology. After they are paired, the watch connects to the sensor automatically when you
start an activity and the sensor is active and within range.
1 Bring the watch within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless sensors while pairing.

2 From the watch face, hold .

3 Select Watch Settings > Connectivity > Sensors & Accessories > Add New.
TIP: When you start an activity with the Auto Discover option enabled, the watch automatically searches for
nearby sensors and asks if you want to pair them.
4 Select an option:
• Select Search All.
• Select your sensor type.
After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor
data appears in the data screen loop or a custom data field. You can customize the optional data fields
(Customizing the Data Screens, page 44).
Heart Rate Accessory Running Pace and Distance
The HRM-Fit and HRM-Pro series accessories calculate your running pace and distance based on your user
profile and the motion measured by the sensor on every stride. The heart rate monitor provides running pace
and distance when GPS is not available, such as during treadmill running. You can view your running pace and
distance on your compatible Enduro watch when connected using ANT+ technology. You can also view it on
compatible third-party training apps when connected using Bluetooth technology.
The pace and distance accuracy improves with calibration.
Automatic calibration: The default setting for your watch is Auto Calibrate. The heart rate accessory calibrates
each time you run outside with it connected to your compatible Enduro watch.
NOTE: Automatic calibration does not work for indoor, trail, or ultra run activity profiles (Tips for Recording
Running Pace and Distance, page 85).
Manual calibration: You can select Calibrate & Save after a treadmill run with your connected heart rate
accessory (Calibrating the Treadmill Distance, page 30).
Tips for Recording Running Pace and Distance
• Update your Enduro watch software (Product Updates, page 128).
• Complete several outdoor runs with GPS and your connected HRM-Fit or HRM-Pro series accessory. It's
important that your outdoor range of paces matches your range of paces on the treadmill.
• If your run includes sand or deep snow, go to the sensor settings, and turn off Auto Calibrate.
• If you previously connected a compatible foot pod using ANT+ technology, set the foot pod status to Off, or
remove it from the list of connected sensors.
• Complete a treadmill run with manual calibration (Calibrating the Treadmill Distance, page 30).
• If automatic and manual calibrations don't seem accurate, go to the sensor settings, and select HRM Pace &
Distance > Reset Calibration Data.
NOTE: You can try turning off Auto Calibrate, and then manually calibrate again (Calibrating the Treadmill
Distance, page 30).

Connectivity 85
Running Dynamics
Running dynamics is real-time feedback about your running form. Your Enduro watch has an accelerometer to
calculate five running form metrics. For all six running form metrics, you must pair your Enduro watch with the
HRM-Fit, HRM-Pro series accessory, or other running dynamics accessory that measures torso movement. For
more information, go to garmin.com/performance-data/running.
Metric Sensor Type Description

Watch or compatible Cadence is the number of steps per minute. It displays the total
Cadence
accessory steps (right and left combined).

Vertical oscil­ Watch or compatible Vertical oscillation is your bounce while running. It displays the
lation accessory vertical motion of your torso, measured in centimeters.

Ground contact time is the amount of time in each step that you
Ground contact Watch or compatible spend on the ground while running. It is measured in milliseconds.
time accessory NOTE: Ground contact time and balance are not available while
walking.

Ground contact time balance displays the left/right balance of your

Ground contact Compatible accessory
ground contact time while running. It displays a percentage. For
time balance only
example, 53.2 with an arrow pointing left or right.

Watch or compatible Stride length is the length of your stride from one footfall to the next.
Stride length
accessory It is measured in meters.

Vertical ratio is the ratio of vertical oscillation to stride length. It

Watch or compatible
Vertical ratio displays a percentage. A lower number typically indicates better
accessory
running form.

Tips for Missing Running Dynamics Data

This topic provides tips for using a compatible running dynamics accessory. If the accessory is not connected
to your watch, the watch automatically switches to wrist-based running dynamics.
• Make sure you have a running dynamics accessory, such as the HRM-Fit or HRM-Pro series accessory.
• Pair the running dynamics accessory with your watch again, according to the instructions.
• If you are using an HRM-Fit or HRM-Pro series accessory, pair it with your watch using ANT+ technology,
rather than Bluetooth technology.
• If the running dynamics data display shows only zeros, make sure the accessory is worn right-side up.
NOTE: Ground contact time and balance appears only while running. It is not calculated while walking.
REMEMBER: Ground contact time balance is not calculated with wrist-based running dynamics.
Running Power
Garmin running power is calculated using measured running dynamics information, user mass, environmental
data, and other sensor data. The power measurement estimates the amount of power a runner applies to the
road surface, and it is displayed in watts. Using running power as a gauge of effort may suit some runners
better than using either pace or heart rate. Running power can be more responsive than heart rate for indicating
the level of effort, and it can account for the uphills, downhills, and wind, which a pace measurement does not
do. For more information, go to garmin.com/performance-data/running.
Running power can be measured using a compatible running dynamics accessory or the watch sensors. You
can customize the running power data fields to view your power output and make adjustments to your training
(Data Fields, page 133). You can set up power alerts to be notified when you reach a specified power zone
(Activity Alerts, page 47).
Running power zones are similar to cycling power zones. The values for the zones are default values based on
gender, weight, and average ability, and may not match your personal abilities. You can manually adjust your
zones on the watch or using your Garmin Connect account (Setting Your Power Zones, page 118).

86 Connectivity
Running Power Settings
Hold , select Activities & Apps, select a running activity, select the activity settings, and select Running
Power.
Status: Enables or disables recording Garmin running power data. You can use this setting if you prefer to use
third-party running power data.
Source: Allows you to select which device to use to record running power data. The Smart Mode option
automatically detects and uses the running dynamics accessory, when available. The watch uses wrist-based
running power data when an accessory is not connected.
Account for Wind: Enables or disables using wind data when calculating your running power. Wind data is a
combination of the speed, heading, and barometer data from your watch and the available wind data from
your phone.
Using the Varia Camera Controls
NOTICE
Some jurisdictions may prohibit or regulate the recording of video, audio, or photographs, or may require that
all parties have knowledge of the recording and provide consent. It is your responsibility to know and follow all
laws, regulations, and any other restrictions in jurisdictions where you plan to use this device.
Before you can use the Varia camera controls, you must pair the accessory with your watch (Pairing Your
Wireless Sensors, page 85).
1 Add the RCT Camera glance to your watch (Glances, page 55).
2 From the RCT Camera glance, select an option:
• Select to view the camera settings.
• Select to take a photo.
• Select to save a clip.
inReach Remote
The inReach remote function allows you to control your inReach satellite communicator using your Enduro
watch. Go to buy.garmin.com for more information about compatible devices.
Using the inReach Remote
Before you can use the inReach remote function, you must add the inReach glance to the glances list
(Customizing the Glances List, page 59).
1 Turn on the inReach satellite communicator.

2 On your Enduro watch, press from the watch face to view the inReach glance.

3 Press to search for your inReach satellite communicator.

4 Press to pair your inReach satellite communicator.

5 Press , and select an option:

• To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a real emergency situation.
• To send a text message, select Messages > New Message, select the message contacts, and enter the
message text or select a quick text option.
• To send a preset message, select Send Preset, and select a message from the list.
• To view the timer and distance traveled during an activity, select Tracking.

Connectivity 87
Xero Laser Location Settings
Before you can customize laser location settings, you must pair a compatible Xero device (Pairing Your Wireless
Sensors, page 85).

From the watch face, hold , and select Watch Settings > Connectivity > Sensors & Accessories > XERO
Laser Locations > Laser Locations.
During Activity: Enables the display of laser location information from a compatible, paired Xero device during
an activity.
Share Mode: Shares laser location information publicly or broadcasts it privately.

Phone Connectivity Features

Phone connectivity features are available for your Enduro watch when you pair it using the Garmin Connect app
(Pairing Your Phone, page 88).
• App features from the Garmin Connect app, the Connect IQ app, and more (Phone Apps and Computer
Applications, page 91)
• Glances (Glances, page 55)
• Controls menu features (Controls, page 51)
• Safety and tracking features (Safety and Tracking Features, page 111)
• Phone interactions, such as notifications (Enabling Phone Notifications, page 88)

Pairing Your Phone

To use the connected features on your watch, you must pair it directly through the Garmin Connect app, instead
of from the Bluetooth settings on your phone.
Select an option:
1
• During the initial setup on your watch, select when you are prompted to pair with your phone.

• If you previously skipped the pairing process, from the watch face, hold , and select Watch Settings >
Connectivity > Pair Phone.

• If you want to pair a new phone, from the watch face, hold , and select Watch Settings > Connectivity
> Phone > Pair Phone.
2 Scan the QR code with your phone, and follow the on-screen instructions to complete the pairing and setup
process.

Enabling Phone Notifications

You can customize how notifications from your paired phone sound and appear on your watch during normal
use.
NOTE: You can configure notifications during sleep or activities in the Focus Modes settings (Focus Modes,
page 96).

1 From the watch face, hold .

2 Select Watch Settings > Connectivity > Phone > Notifications.
3 Select an option:
• To enable phone notifications, select Status > On.
• To enable notifications for phone calls, select Calls, and select status, tone, and vibration preferences.
• To enable notifications for text messages, select Texts, and select status, tone, and vibration preferences.
• To enable notifications for phone apps, select Apps, and select status, tone, and vibration preferences.
• To hide notification details until you perform an action, select Privacy, and select an option.
• To change how long the watch displays notifications, select Timeout.
• To add a signature to your text message replies from your watch, select Signature.
NOTE: This feature is available only for compatible Android™ phones.

88 Connectivity
Viewing Notifications
You can view your phone notifications on your watch from several menu locations.
Select an option:
1
• From the watch face, press to view the notification center.

• From the watch face, press to view the notifications glance.

• From the watch face, press , and select Notifications to view the notifications app.

• Hold , and select Notifications to view the notifications control.

2 Select a notification.

3 Press for more options.

Receiving an Incoming Phone Call

When you receive a phone call on your connected phone, the Enduro watch displays the name or phone number
of the caller.
• To accept the call, select .
NOTE: To talk to the caller, you must use your connected phone.
• To decline the call, select .
• To decline the call and immediately send a text message reply, select Reply, and select a message from the
list.
NOTE: To send a text message reply, you must be connected to a compatible Android phone using Bluetooth
technology.
Replying to a Text Message
NOTE: This feature is available only for compatible Android phones.
When you receive a text message notification on your watch, you can send a quick reply by selecting from a list
of messages. You can customize messages in the Garmin Connect app.
NOTE: This feature sends text messages using your phone. Regular text message limits and charges from your
carrier and phone plan may apply. Contact your mobile carrier for more information about text message charges
or limits.

1 From the watch face, press to view the notification center.

2 Select a text message notification.

3 Press .
4 Select Reply.
5 Select a message from the list.
Your phone sends the selected message as an SMS text message.
Managing Notifications
You can use your compatible phone to manage notifications that appear on your Enduro watch.
Select an option:
• If you are using an iPhone , go to the iOS notifications settings to select the items to show on the watch.
® ®

• If you are using an Android phone, from the Garmin Connect app, select > Settings > Notifications.

Connectivity 89
Turning Off the Bluetooth Phone Connection
You can turn off the Bluetooth phone connection from the controls menu.
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page 54).

1 Hold to view the controls menu.

2 Select to turn off the Bluetooth phone connection on your Enduro watch.
Refer to the owner's manual for your phone to turn off Bluetooth technology on your phone.

Turning On and Off Find My Phone Alerts

1 From the watch face, hold .
2 Select Watch Settings > Connectivity > Phone > Find My Phone Alerts.
Locating a Phone Lost During a GPS Activity
Your Enduro watch automatically stores a GPS location when your paired phone is disconnected during a GPS
activity. You can use this feature to help locate a phone that is lost during an activity.
1 Start a GPS activity.
2 When prompted to navigate to the last known location of your device, select .
3 Navigate to the location on the map (Saving or Navigating to a Location on the Map, page 102).

4 Press to view a compass pointing to the location (optional).

5 When your watch is within Bluetooth range of your phone, the Bluetooth signal strength appears on the
screen.
The signal strength increases as you move closer to your phone.

Wi‑Fi Connectivity Features

Activity uploads to your Garmin Connect account: Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.
Audio content: Allows you to sync audio content from third-party providers.
Course updates: Allows you to download and install golf course updates.
Map downloads: Allows you to download and install maps.
Software updates: You can download and install the latest software.
Workouts and training plans: You can browse for and select workouts and training plans on your Garmin
Connect account. The next time your watch has a Wi‑Fi connection, the files are sent to your watch.

Connecting to a Wi‑Fi Network

You must connect your watch to the Garmin Connect app on your phone or to the Garmin Express™ application
on your computer before you can connect to a Wi‑Fi network.

1 From the watch face, hold .

2 Select Watch Settings > Connectivity > Wi-Fi > My Networks > Search for Networks.
The watch displays a list of nearby Wi‑Fi networks.
3 Select a network.
4 If necessary, enter the password for the network.
The watch connects to the network, and the network is added to the list of saved networks. The watch
reconnects to this network automatically when it is within range.

90 Connectivity
Garmin Share
NOTICE
It is your responsibility to use discretion when sharing information with others. Always ensure you are aware of
and comfortable with the individual with whom you share information.
The Garmin Share feature allows you to use Bluetooth technology to wirelessly share your data with other
compatible Garmin devices. With Garmin Share enabled and compatible Garmin devices in range of each other,
you can select saved locations, courses, and workouts to transfer to another device through a direct, secured
device-to-device connection, without the need for a phone or Wi‑Fi connectivity.

Sharing Data with Garmin Share

Before you can use this feature, you must have Bluetooth technology enabled on both compatible devices, and
they must be within 3 m (10 ft.) of each other. When prompted, you must also consent to share your data with
other Garmin devices using Garmin Share.
Your Enduro watch can send and receive data when connected to another compatible Garmin device (Receiving
Data with Garmin Share, page 91). You can also transfer your data between different devices. For example, you
can share a favorite course from your Edge bike computer to your compatible Garmin watch.

1 From the watch face, press .

2 Select Garmin Share > Share.
3 Select a category, and select one item.
4 Select an option:
• Select Share.
• Select Add More > Share to select more than one item to share.
5 Wait while the device locates compatible devices.
6 Select a device.
7 Confirm the six-digit PIN matches on both devices, and select .
8 Wait while the devices transfer the data.
9 Select Share Again to share the same items with another user (optional).
10 Select Done.

Receiving Data with Garmin Share

Before you can use this feature, you must have Bluetooth technology enabled on both compatible devices, and
they must be within 3 m (10 ft.) of each other. When prompted, you must also consent to share your data with
other Garmin devices using Garmin Share.

1 From the watch face, press .

2 Select Garmin Share.
3 Wait while the device locates compatible devices in range.
4 Select .
5 Confirm the six-digit PIN matches on both devices, and select .
6 Wait while the devices transfer the data.
7 Select Done.

Phone Apps and Computer Applications

You can connect your watch to multiple Garmin phone apps and computer applications using the same Garmin
account.

Connectivity 91
Garmin Connect
You can connect with your friends on Garmin Connect. Garmin Connect gives you the tools to track, analyze,
share, and encourage each other. Record the events of your active lifestyle including runs, walks, rides, swims,
hikes, triathlons, and more. To sign up for a free account, you can download the app from the app store on your
phone (garmin.com/connectapp), or go to connect.garmin.com.
Store your activities: After you complete and save an activity with your watch, you can upload that activity to
your Garmin Connect account and keep it as long as you want.
Analyze your data: You can view more detailed information about your activity, including time, distance,
elevation, heart rate, calories burned, cadence, running dynamics, an overhead map view, pace and speed
charts, and customizable reports.
NOTE: Some data requires an optional accessory such as a heart rate monitor.

Plan your training: You can choose a fitness goal and load one of the day-by-day training plans.
Track your progress: You can track your daily steps, join a friendly competition with your connections, and meet
your goals.
Share your activities: You can connect with friends to follow each other's activities or share links to your
activities.
Manage your settings: You can customize your watch and user settings on your Garmin Connect account.
Using the Garmin Connect App
After you pair your watch with your phone (Pairing Your Phone, page 88), you can use the Garmin Connect app to
upload all of your activity data to your Garmin Connect account.
1 Verify the Garmin Connect app is running on your phone.
2 Bring your watch within 10 m (30 ft.) of your phone.
Your watch automatically syncs your data with the Garmin Connect app and your Garmin Connect account.
Updating the Software Using the Garmin Connect App
Before you can update your watch software using the Garmin Connect app, you must have a Garmin Connect
account, and you must pair the watch with a compatible phone (Pairing Your Phone, page 88).
Sync your watch with the Garmin Connect app (Using the Garmin Connect App, page 92).
When new software is available, the Garmin Connect app automatically sends the update to your watch.

92 Connectivity
Unified Training Status
When you use more than one Garmin device with your Garmin Connect account, you can choose which device is
the primary data source for everyday use and for training purposes.
From the Garmin Connect app, select > Settings.
Primary Training Device: Sets the priority data source for training metrics like your training status and load
focus.
Primary Wearable: Sets the priority data source for daily health metrics like steps and sleep. This should be the
watch you wear most often.
TIP: For the most accurate results, Garmin recommends that you sync often with your Garmin Connect account.
Syncing Activities and Performance Measurements
You can sync activities and performance measurements from other Garmin devices to your Enduro watch using
your Garmin Connect account. This allows your watch to more accurately reflect your training and fitness. For
example, you can record a ride with an Edge bike computer, and view your activity details and recovery time on
your Enduro watch.
Sync your Enduro watch and other Garmin devices to your Garmin Connect account.
TIP: You can set a primary training device and primary wearable in the Garmin Connect app (Unified Training
Status, page 93).
Recent activities and performance measurements from your other Garmin devices appear on your Enduro
watch.
Using Garmin Connect on Your Computer
The Garmin Express application connects your watch to your Garmin Connect account using a computer. You
can use the Garmin Express application to upload your activity data to your Garmin Connect account and
to send data, such as workouts or training plans, from the Garmin Connect website to your watch. You can
also add music to your watch (Downloading Personal Audio Content, page 114). You can also install software
updates and manage your Connect IQ apps.
1 Connect the watch to your computer using the USB cable.
2 Go to garmin.com/express.
3 Download and install the Garmin Express application.
4 Open the Garmin Express application, and select Add Device.
5 Follow the on-screen instructions.
Updating the Software Using Garmin Express
Before you can update your device software, you must have a Garmin Connect account, and you must download
the Garmin Express application.
1 Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to your device.
2 Follow the on-screen instructions.
3 Do not disconnect your device from the computer during the update process.
NOTE: If you have already set up your device with Wi‑Fi connectivity, Garmin Connect can automatically
download available software updates to your device when it connects using Wi‑Fi.
Manually Syncing Data with Garmin Connect
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page 54).

1 Hold to view the controls menu.

2 Select Sync.

Connectivity 93
Connect IQ Features
You can add Connect IQ apps, glances, music providers, watch faces, and more to your watch using the
Connect IQ store on your watch or phone (garmin.com/connectiqapp).
Watch Faces: Customize the appearance of the clock.
Device Apps: Add interactive features to your watch, such as glances and new outdoor and fitness activity
types.
Data Fields: Download new data fields that present sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Music: Add music providers to your watch.
Downloading Connect IQ Features
Before you can download features from the Connect IQ app, you must pair your Enduro watch with your phone
(Pairing Your Phone, page 88).
1 From the app store on your phone, install and open the Connect IQ app.
2 If necessary, select your watch.
3 Select a Connect IQ feature.
4 Follow the on-screen instructions.
Downloading Connect IQ Features Using Your Computer
1 Connect the watch to your computer using a USB cable.
2 Go to apps.garmin.com, and sign in.
3 Select a Connect IQ feature, and download it.
4 Follow the on-screen instructions.

Garmin Explore™
The Garmin Explore website and app allow you to create courses, waypoints, and collections, plan trips, and use
cloud storage. They offer advanced planning both online and offline, allowing you to share and sync data with
your compatible Garmin device. You can use the app to download maps for offline access, and then navigate
anywhere without using your cellular service.
You can download the Garmin Explore app from the app store on your phone (garmin.com/exploreapp), or you
can go to explore.garmin.com.

94 Connectivity
Garmin Messenger App
WARNING
The inReach features of the Garmin Messenger app, including SOS, tracking, and inReach Weather, are not
available without a connected inReach satellite communicator and an active satellite subscription. Always test
the app outdoors before using it on a trip.

CAUTION
The non-satellite messaging features of the Garmin Messenger app alone should not be relied on as a primary
method to obtain emergency assistance.

NOTICE
The app works over both the internet (using a wireless connection or cellular data on your phone) and the
Iridium satellite network. If you are using cellular data, your paired phone must be equipped with a data plan
®

and be in an area of network coverage where data is available. If you are in an area without network coverage,
you must have an active satellite subscription for your inReach satellite communicator to use the Iridium
satellite network.
You can use the app to message other Garmin Messenger app users, including friends and family without
Garmin devices. Anyone can download the app and connect their phone, allowing them to communicate with
other app users over the internet (no login is required). App users can also create group messaging threads
with other SMS phone numbers. New members added to the group message can download the app to see what
others are saying.
Messages sent using a wireless connection or cellular data on your phone do not incur data charges or
additional charges on your satellite subscription. Messages received may incur charges if message delivery
is attempted over both the Iridium satellite network and the internet. Standard text messaging rates for your
cellular data plan apply.
You can download the Garmin Messenger app from the app store on your phone (garmin.com/messengerapp).
Using the Messenger Feature
CAUTION
The non-satellite messaging features of the Garmin Messenger app alone should not be relied on as a primary
method to obtain emergency assistance.

NOTICE
To use the Messenger feature, your Enduro watch must be connected to the Garmin Messenger app on your
compatible phone using Bluetooth technology.

The Messenger feature on your watch allows you to view, compose, and reply to messages from the Garmin
Messenger phone app.

1 From the watch face, press to view the Messenger glance.

TIP: The Messenger feature is available as a glance, app, or controls menu option on your watch.

2 Press to open the glance.

3 If this is your first time using the Messenger feature, scan the QR code with your phone, and follow the
on-screen instructions to complete the pairing and setup process.
On your watch, select an option:
4
• To compose a new message, select New Message, select a recipient, and either select a pre-defined
message or compose your own.

• To view a conversation, press or , and select a conversation.

• To reply to a message, select a conversation, select Reply, and either select a pre-defined message or
compose your own.

Connectivity 95
Garmin Golf App
The Garmin Golf app allows you to upload scorecards from your Enduro device to view detailed statistics and
shot analyses. Golfers can compete with each other at different courses using the Garmin Golf app. More than
43,000 courses have leaderboards that anyone can join. You can set up a tournament event and invite players to
compete. With a Garmin Golf membership, you can view green contour data on your phone and Enduro device.
The Garmin Golf app syncs your data with your Garmin Connect account. You can download the Garmin Golf
app from the app store on your phone (garmin.com/golfapp).

Focus Modes
Focus modes adjust the watch settings and behavior for different situations, such as sleep and activities. When
you change the settings with a focus mode enabled, the settings are updated only for that focus mode.

Customizing the Sleep Focus Mode

1 From the watch face, hold .
2 Select Watch Settings > Focus Modes > Sleep.
3 Select an option:
• Select Schedule, select a day, and enter your normal sleep hours.
• Select Watch Face to use the sleep watch face.
• Select Notifications & Alerts to configure phone notifications, health and wellness alerts, and system
alerts (Notifications and Alerts Settings, page 80).
• Select Sound & Vibe to configure alarm tones and vibration (Sound and Vibration Settings, page 82).
• Select Display & Brightness to configure the screen settings (Display and Brightness Settings, page 82).

Customizing the Activity Focus Mode

1 From the watch face, hold .
2 Select Watch Settings > Focus Modes > Activity.
3 Select an option:
• Select Satellites to set the satellite systems to use for all activities.
TIP: You can customize the Satellites setting for individual activities (Activity Settings, page 45).
• Select Voice Alerts to enable voice alerts during activities (Playing Voice Alerts During an Activity,
page 97).
• Select Notifications & Alerts to configure phone notifications, health and wellness alerts, and system
alerts (Notifications and Alerts Settings, page 80).
• Select Display & Brightness to configure the screen settings (Display and Brightness Settings, page 82).
• Select Sound & Vibe to configure alert tones and vibration settings (Sound and Vibration Settings,
page 82).

96 Focus Modes
Playing Voice Alerts During an Activity
Your watch can play motivational status announcements during a run or other activity. Audio prompts play on
your connected Bluetooth headphones, if available. Otherwise, audio prompts play on your paired phone. During
an voice alert, the watch or phone lowers the volume of the primary audio to play the announcement.
NOTE: This feature is not available for all activities.

1 From the watch face, hold .

2 Select Watch Settings > Focus Modes > Activity > Voice Alerts.
3 Select an option:
• To hear an alert for each lap, select Lap Alert.
• To customize alerts with your pace and speed information, select Pace/Speed Alert.
• To customize alerts with your heart rate information, select Heart Rate Alert.
• To customize alerts with power data, select Power Alert.
• To hear alerts when you start and stop the activity timer, including the Auto Pause feature, select Timer
Events.
• To hear workout alerts play as a voice alert, select Workout Alerts.
• To hear activity alerts play as a voice alert, select Activity Alerts (Activity Alerts, page 47).
• To hear a sound play right before a voice alert, select Audio Tones.

Health and Wellness Settings

From the watch face, hold , and select Watch Settings > Health & Wellness.
Wrist Heart Rate: Customizes the wrist heart rate monitor settings (Wrist Heart Rate Monitor Settings,
page 98).
Pulse Oximeter: Sets the pulse oximeter mode (Setting the Pulse Oximeter Mode, page 100).
Move IQ: Enables Move IQ events. When your movements match familiar exercise patterns, the Move IQ
®

feature automatically detects the event and displays it in your timeline. The Move IQ events show activity
type and duration, but they do not appear in your activities list or newsfeed. For more detail and accuracy, you
can record a timed activity on your device.

Wrist Heart Rate

Your watch has a wrist-based heart rate monitor, and you can view your heart rate data on the heart rate glance
(Viewing Glances, page 58).
The watch is also compatible with chest heart rate monitors. If both wrist-based heart rate and chest heart rate
data are available when you start an activity, your watch uses the chest heart rate data.

Health and Wellness Settings 97

Wearing the Watch
CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist. For
more information, go to garmin.com/fitandcare.
• Wear the watch above your wrist bone.
NOTE: The watch should be snug but comfortable. For more accurate heart rate readings, the watch should
not shift while running or exercising. For pulse oximeter readings, you should remain motionless.

NOTE: The optical sensor is located on the back of the watch.

• See Tips for Erratic Heart Rate Data, page 98 for more information about wrist-based heart rate.
• See Tips for Erratic Pulse Oximeter Data, page 100 for more information about the pulse oximeter sensor.
• For more information about accuracy, go to garmin.com/ataccuracy.
• For more information about watch wear and care, go to garmin.com/fitandcare.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try these tips.
• Clean and dry your arm before putting on the watch.
• Avoid wearing sunscreen, lotion, and insect repellent under the watch.
• Avoid scratching the heart rate sensor on the back of the watch.
• Wear the watch above your wrist bone. The watch should be snug but comfortable.
• Wait until the icon is solid before starting your activity.
• Warm up for 5 to 10 minutes and get a heart rate reading before starting your activity.
NOTE: In cold environments, warm up indoors.
• Rinse the watch with fresh water after each workout.

Wrist Heart Rate Monitor Settings

From the watch face, hold , and select Watch Settings > Health & Wellness > Wrist Heart Rate.
Status: Enables the wrist heart rate monitor. The default value is Auto, which automatically uses the wrist heart
rate monitor unless you pair an external heart rate monitor.
NOTE: Disabling the wrist heart rate monitor also disables the wrist-based pulse oximeter sensor. You can
perform a manual reading from the pulse oximeter glance.
Broadcast Heart Rate: Broadcasts your heart rate data to a paired device (Broadcasting Heart Rate Data,
page 99).

98 Health and Wellness Settings

Broadcasting Heart Rate Data
You can broadcast your heart rate data from your watch and view it on paired devices. Broadcasting heart rate
data decreases battery life.
TIP: You can customize the activity settings to broadcast your heart rate data automatically when you begin an
activity (Activity Settings, page 45). For example, you can broadcast your heart rate data to an Edge device while
cycling.
Select an option:
1
• Hold , and select Watch Settings > Health & Wellness > Wrist Heart Rate > Broadcast Heart Rate.

• Hold to open the controls menu, and select .

NOTE: You can add options to the controls menu (Customizing the Controls Menu, page 54).

2 Press .
The watch starts broadcasting your heart rate data.
3 Pair your watch with your compatible device.
NOTE: The pairing instructions differ for each Garmin compatible device. See your owner's manual.

4 Press to stop broadcasting your heart rate data.

Pulse Oximeter
Your watch has a wrist-based pulse oximeter to gauge the peripheral saturation of oxygen in your blood (SpO2).
As your altitude increases, the level of oxygen in your blood can decrease. Knowing your oxygen saturation can
help you determine how your body is acclimating to high altitudes for alpine sport and expedition.
You can manually begin a pulse oximeter reading by viewing the pulse oximeter glance (Getting Pulse Oximeter
Readings, page 100). You can also turn on all-day readings (Setting the Pulse Oximeter Mode, page 100). When
you view the pulse oximeter glance while you are not moving, your watch analyzes your oxygen saturation and
your elevation. The elevation profile helps indicate how your pulse oximeter readings are changing, relative to
your to elevation.
On the watch, your pulse oximeter reading appears as an oxygen saturation percentage and color on the graph.
On your Garmin Connect account, you can view additional details about your pulse oximeter readings, including
trends over multiple days.
For more information about pulse oximeter accuracy, go to garmin.com/ataccuracy.

Health and Wellness Settings 99

 The elevation scale.

A graph of your average oxygen saturation readings for the last 24 hours.

Your most recent oxygen saturation reading.

The oxygen saturation percentage scale.

A graph of your elevation readings for the last 24 hours.

Getting Pulse Oximeter Readings

You can manually begin a pulse oximeter reading by viewing the pulse oximeter glance. The glance displays
your most recent blood oxygen saturation percentage, a graph of your hourly average readings for the last 24
hours, and a graph of your elevation for the last 24 hours.
NOTE: The first time you view the pulse oximeter glance, the watch must acquire satellite signals to determine
your elevation. You should go outside, and wait while the watch locates satellites.

1 While you are sitting or inactive, press from the watch face to view the pulse oximeter glance.

2 Press to view glance details and begin a pulse oximeter reading.

3 Remain motionless for up to 30 seconds.
NOTE: If you are too active for the watch to get a pulse oximeter reading, a message appears instead of a
percentage. You can check again after several minutes of inactivity. For best results, hold the arm wearing
the watch at heart level while the watch reads your blood oxygen saturation.

4 Press to view a graph of your pulse oximeter readings for the last seven days.

Setting the Pulse Oximeter Mode

1 From the watch face, hold .
2 Select Watch Settings > Health & Wellness > Pulse Oximeter.
3 Select an option:
• To turn on measurements while you are inactive during the day, select All Day.
NOTE: Turning on All Day mode decreases battery life.
• To turn on continuous measurements while you sleep, select During Sleep.
NOTE: Unusual sleep positions can cause abnormally low sleep-time SpO2 readings.
• To turn off automatic measurements, select On Demand.

Tips for Erratic Pulse Oximeter Data

If the pulse oximeter data is erratic or does not appear, you can try these tips.
• Remain motionless while the watch reads your blood oxygen saturation.
• Wear the watch above your wrist bone. The watch should be snug but comfortable.
• Hold the arm wearing the watch at heart level while the watch reads your blood oxygen saturation.
• Use a silicone or nylon band.
• Clean and dry your arm before putting on the watch.
• Avoid wearing sunscreen, lotion, and insect repellent under the watch.
• Avoid scratching the optical sensor on the back of the watch.
• Rinse the watch with fresh water after each workout.

100 Health and Wellness Settings

Auto Goal
Your device creates a daily step goal automatically, based on your previous activity levels. As you move during
the day, the device shows your progress toward your daily goal.
If you choose not to use the auto goal feature, you can set a personalized step goal on your Garmin Connect
account.

Using the Move Alert

Sitting for prolonged periods of time can trigger undesirable metabolic state changes. The move alert reminds
you to keep moving. After one hour of inactivity, Move! and the move bar appear. Additional segments appear
after every 15 minutes of inactivity. The device also beeps or vibrates if audible tones are turned on (System
Settings, page 120).
Go for a short walk (at least a couple of minutes) to reset the move alert.

Intensity Minutes
To improve your health, organizations such as the World Health Organization recommend at least 150 minutes
per week of moderate intensity activity, such as brisk walking, or 75 minutes per week of vigorous intensity
activity, such as running.
The watch monitors your activity intensity and tracks your time spent participating in moderate to vigorous
intensity activities (heart rate data is required to quantify vigorous intensity). The watch adds the amount of
moderate activity minutes with the amount of vigorous activity minutes. Your total vigorous intensity minutes
are doubled when added.

Earning Intensity Minutes

Your Enduro watch calculates intensity minutes by comparing your heart rate data to your average resting heart
rate. If heart rate is turned off, the watch calculates moderate intensity minutes by analyzing your steps per
minute.
• Start a timed activity for the most accurate calculation of intensity minutes.
• Wear your watch all day and night for the most accurate resting heart rate.

Sleep Tracking
While you are sleeping, the watch automatically detects your sleep and monitors your movement during your
normal sleep hours. You can set your normal sleep hours in the Garmin Connect app or in the watch settings
(Customizing the Sleep Focus Mode, page 96). Sleep statistics include total hours of sleep, sleep stages, sleep
movement, and sleep score. Your sleep coach provides sleep need recommendations based on your sleep and
activity history, HRV status, and naps (Glances, page 55). Naps are added to your sleep statistics, and can also
impact your recovery. You can view detailed sleep statistics on your Garmin Connect account.
NOTE: You can use do not disturb mode to turn off notifications and alerts, with the exception of alarms
(Controls, page 51).

Using Automated Sleep Tracking

1 Wear your watch while sleeping.
2 Upload your sleep tracking data to your Garmin Connect account (Using the Garmin Connect App, page 92).
You can view your sleep statistics on your Garmin Connect account.
You can view sleep information from the previous night on your Enduro watch (Glances, page 55).

Health and Wellness Settings 101

 Map
Your watch can display several types of Garmin map data, including topographical contours, nearby points of
interest, ski resort maps, and golf courses. You can use the Map Manager to download additional maps or
manage map storage.
To purchase additional map data and view compatibility information, go to garmin.com/maps.
represents your location on the map. When you are navigating to a destination, your route is marked with a
line on the map.

Viewing the Map

Select an option to open the map:
1
• Press , and select Map to view the map without starting an activity.

• Go outside, start a GPS activity (Starting an Activity, page 17), and press or to scroll to the map
screen.
2 If necessary, wait while the watch locates satellites.
Select an option to pan and zoom the map:
3
• To use the touchscreen, tap the map, tap and drag to position the crosshairs, and press or to
zoom in or out.

• To use the buttons, hold , select Pan/Zoom, and press or to zoom in or out.

NOTE: You can press to toggle between panning up and down, panning left and right, or zooming.

4 Hold to select the point indicated by the crosshairs.

Saving or Navigating to a Location on the Map

You can select any location on the map. You can save the location or start navigating to it.
From the map, select an option:
1
• To use the touchscreen, tap the map, tap and drag to position the crosshairs, and press or to
zoom in or out.

• To use the buttons, hold , select Pan/Zoom, and press or to zoom in or out.

NOTE: You can press to toggle between panning up and down, panning left and right, or zooming.
2 Pan and zoom the map to center the location in the crosshairs.

3 Hold to select the point indicated by the crosshairs.

4 If necessary, select a nearby point of interest.
5 Select an option:
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select Review.

102 Map
Map Settings
You can customize how the map appears in the map app and data screens.
NOTE: If necessary, you can customize the map settings for specific activities instead of using the system
settings (Activity Settings, page 45).

From the watch face, hold , and select Watch Settings > Map & Navigation.
Map Manager: Shows the downloaded map versions and allows you to download additional maps (Managing
Maps, page 103).
Dark Mode: Sets the map colors to either a white or black background for daytime or nighttime visibility. The
Auto option adjusts the map colors based on the time of day.
High Contrast: Sets the map to display data with higher contrast, for better visibility in challenging
environments.
Orientation: Sets the orientation of the map. The North Up option shows north at the top of the screen. The
Track Up option shows your current direction of travel at the top of the screen.
Lock on Road: Locks the position icon, which represents your position on the map, onto the nearest road.
Detail: Sets the amount of detail shown on the map. Showing more detail may cause the map to redraw more
slowly.
Symbol Set: Sets the chart symbols in marine mode. The NOAA option displays the National Oceanic and
Atmospheric Administration chart symbols. The International option displays the International Association of
Lighthouse Authorities chart symbols.

Managing Maps
1 From the watch face, hold .
2 Select Watch Settings > Map & Navigation > Map Manager.
3 Select an option:
• To download premium maps and activate your Outdoor Maps+ subscription for this device, select
Outdoor Maps+ (Downloading Maps with Outdoor Maps+, page 104).
• To download TopoActive maps, select TopoActive Maps (Downloading TopoActive Maps, page 104).

Map 103
Downloading Maps with Outdoor Maps+
Before you can download maps to your device, you must connect to a wireless network (Connecting to a Wi‑Fi
Network, page 90).

1 From the watch face, hold .

2 Select Watch Settings > Map & Navigation > Map Manager > Outdoor Maps+.

3 If necessary, press , and select Check Subscription to activate your Outdoor Maps+ subscription for this
watch.
NOTE: Go to garmin.com/outdoormaps for information about purchasing a subscription.
4 Select Add Map, and select a location.
A preview of the map region appears.
5 From the map, complete one or more actions:
• Drag the map to view different areas.
• Pinch or spread two fingers on the touchscreen to zoom in and out of the map.
• Select and to zoom in and out of the map.

6 Press , and select .

7 Select .
8 Select an option:
• To edit the map name, select Name.
• To change the map layers to download, select Layers.
TIP: You can select to view details about the map layers.
• To modify the map region, select Selected Area.
9 Select to download the map.
NOTE: To prevent battery drain, the watch queues the map download for later, and the download starts when
you connect the watch to an external power source.
Downloading TopoActive Maps
Before you can download maps to your device, you must connect to a wireless network (Connecting to a Wi‑Fi
Network, page 90).

1 From the watch face, hold .

2 Select Watch Settings > Map & Navigation > Map Manager > TopoActive Maps > Add Map.
3 Select a map.

4 Press , and select Download.

NOTE: To prevent battery drain, the watch queues the map download for later, and the download starts when
you connect the watch to an external power source.
Deleting Maps
You can remove maps to increase the available device storage.

1 From the watch face, hold .

2 Select Watch Settings > Map & Navigation > Map Manager.
Select an option:
3
• Select TopoActive Maps, select a map, press , and select Remove.

• Select Outdoor Maps+, select a map, press , and select Delete.

104 Map
Showing and Hiding Map Data
You can choose the map data to show on the map and save map data themes for multiple activities.

1 From the watch face, press .

2 Select Map.

3 Press .
4 Select Map Layers.
5 Select an option:
• To customize the map data for an activity type, select Activity Theme, and select an activity.
Changes you make to the map data settings are saved to the selected activity theme.
• To select the installed map product to display, select Map Type, and select a map product.
• To turn on specific map features, such as activity lines or saved locations, select the map feature, and
select Status > On.
TIP: You can select Apply to all Activities to apply the setting to all activity themes.
• To view your downloaded map versions or download additional maps, select Get More Maps (Managing
Maps, page 103).

Navigation
Navigating to a Destination
You can use your device to navigate to a destination or follow a course.

1 From the watch face, press .

2 Select Map.

3 Press .
4 Select Navigate.
5 Select a category.
6 Respond to the on-screen prompts to choose a destination.
7 Select Go To.
8 Select the activity you want to use while following the course.
Navigation information appears.

9 Press to begin navigation.

Navigation 105
Navigating to a Nearby Point of Interest
If the map data installed on your watch includes points of interest, you can navigate to them.

1 From the watch face, press .

2 Select Map.

3 Press .
4 Select Navigate > Explore Nearby.
A list of points of interest near your current location appears.
Select an option:
5
• Select a category and, if necessary, follow the on-screen prompts.

• Press to open the keyboard, and enter a location name.

6 Select a point of interest from the search results.
7 Select Go To.
8 Select the activity you want to use while following the course.
Navigation information appears.

9 Press to begin navigation.

Navigating to Your Starting Point During an Activity

You can navigate back to the starting point of your current activity in a straight line or along the path you
traveled. This feature is available only for activities that use GPS.

1 During an activity, press .

2 Select Back to Start, and select an option:
• To navigate back to the starting point of your activity along the path you traveled, select TracBack.
• If you do not have a supported map or are using direct routing, select Route to navigate back to the
starting point of your activity in a straight line.
• If you are not using direct routing, select Route to navigate back to the starting point of your activity using
turn-by-turn directions.

Your current location and the track to follow appear on the map.

106 Navigation
Marking and Starting Navigation to a Man Overboard Location
You can save a man overboard (MOB) location, and automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access the MOB function (Customizing the Button
Shortcuts, page 120).

1 From the watch face, press .

2 Select an activity.

3 Hold .
4 Select Navigate > Last MOB.
Navigation information appears.

Stopping Navigation
1 While navigating during an activity, hold .
2 Select the destination.
Destination details appear.

3 Press .
4 Select Stop Navigation.
Navigation to your destination stops, but your activity remains active.

Saving Locations
Saving Your Location
You can save your current location to navigate back to it later from the Saved app (Using the Saved App,
page 12).
NOTE: You can add options to the controls menu (Customizing the Controls Menu, page 54).

1 Hold .
2 Select .
3 Follow the on-screen instructions.

Saving a Dual Grid Location

You can save your current location using dual grid coordinates to navigate back to the same location later.
1 Customize a button or button combination for the Dual Grid feature (Customizing the Button Shortcuts,
page 120).
2 Hold the button or button combination you customized to save a dual grid location.
3 Wait while the watch locates satellites.

4 Press to save the location.

5 If necessary, press to edit the location details.

Navigation 107
Sharing a Location From a Map Using the Garmin Connect App
NOTICE
It is your responsibility to use discretion when sharing location information with others. Always ensure you are
aware of and comfortable with the individual with whom you share location information.
NOTE: This feature is available only if your course-compatible Garmin device is connected to an iPhone device
using Bluetooth technology.
You can share location information and data from Apple Maps to your compatible Garmin device.
®

1 From Apple Maps, select a location.

2 Select > .
3 If necessary, from the Garmin Connect app, select the Garmin device.
A notification appears in the Garmin Connect app indicating that the location in now available on your device
(Starting a GPS Activity From a Shared Location, page 108).
Starting a GPS Activity From a Shared Location
You can use the Garmin Connect app to share a location from Apple Maps to your watch, and navigate to that
location (Sharing a Location From a Map Using the Garmin Connect App, page 108).
1 When you receive the location notification on your watch, select .
Your watch displays location information.
TIP: The location is saved in the Saved app (Using the Saved App, page 12).
2 Select Go To, and choose an activity.
3 Follow the on-screen instructions to proceed to your destination.
Navigating to a Shared Location During an Activity
This feature is designed for activities using GPS. If GPS is turned off for your activity, you can view the location
later.
TIP: The location is saved in the Saved app (Using the Saved App, page 12).
You can receive shared locations on your watch during a GPS activity and navigate to those locations (Sharing a
Location From a Map Using the Garmin Connect App, page 108).
1 If a shared location notification appears during a GPS activity, select to navigate to the shared location.
2 Follow the on-screen instructions to proceed to your destination.

Courses
WARNING
This feature allows users to download routes created by other users. Garmin makes no representations about
the safety, accuracy, reliability, completeness, or timeliness of routes created by third parties. Any use or
reliance on routes created by third parties is at your own risk.
You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike
friendly commute to work.
You can also follow a saved course, trying to match or exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you can race against a Virtual Partner trying to complete the
course in under 30 minutes.

108 Navigation
Creating and Following a Course on Your Device
1 From the watch face, press .
2 Select Map.

3 Press .
4 Select Navigate > Create a Course.
5 Select an option:
• Select Round-Trip Course to create a round-trip course based on a specified distance and direction of
navigation.
• Select Activities to create a course based on a previously-saved activity.
• Select Sight 'N Go to create a straight-line course toward an object you can see in the distance.
• Select Coordinates to create a course to a location based on geographic coordinates.
• Select Use Map to create a course by selecting course points on the map.
6 Select the activity you want to use while following the course.
7 If necessary, follow the on-screen prompts to enter location information.

8 Press to begin navigation.

Creating a Round-Trip Course

The device can create a round-trip course based on a specified distance and direction of navigation.

1 From the watch face, press .

2 Select Map.

3 Press .
4 Select Navigate > Create a Course > Round-Trip Course.
5 Select the activity you want to use while following the course.
6 Enter the total distance for the course.
Select a direction heading.
7
The device creates up to three courses. You can press to view the courses.

8 Press to select a course.

9 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom the map, select Map.
• To view a list of turns in the course, select Turn By Turn.
• To view an elevation plot of the course, select Elevation.
• To save the course, select Save.
• To view a list of ascents in the course, select View Climbs.

Navigation 109
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a water tower, lock in the direction, and then
navigate to the object.

1 From the watch face, press .

2 Select Map.

3 Press .
4 Select Navigate > Create a Course > Sight 'N Go.
5 Select the activity you want to use while following the course.

6 Point the top of the watch at an object, and press .

Navigation information appears.

7 Press to begin navigation.

Creating a Course on Garmin Connect

Before you can create a course on the Garmin Connect app, you must have a Garmin Connect account (Garmin
Connect, page 92).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses > Create Course.
3 Select a course type.
4 Follow the on-screen instructions.
5 Select Done.
NOTE: You can send this course to your device (Sending a Course to Your Device, page 110).
Sending a Course to Your Device
You can send a course you created using the Garmin Connect app to your device (Creating a Course on Garmin
Connect, page 110).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses.
3 Select a course.
4 Select .
5 Select your compatible device.
6 Follow the on-screen instructions.

110 Navigation
Projecting a Waypoint
You can create a new location by projecting the distance and bearing from your current location to a new
location.
NOTE: You may need to add the Project Wpt. app to the activities and apps list.

1 From the watch face, press .

2 Select Project Wpt..

3 Press or to set the heading.

4 Press .

5 Press to select a unit of measure.

6 Press to enter the distance.

7 Press to save.
The projected waypoint is saved with a default name.

Safety and Tracking Features

CAUTION
The safety and tracking features are supplemental features and should not be relied on as a primary method to
obtain emergency assistance. The Garmin Connect app does not contact emergency services on your behalf.

NOTICE
To use the safety and tracking features, the Enduro watch must be connected to the Garmin Connect app using
Bluetooth technology. Your paired phone must be equipped with a data plan and be in an area of network
coverage where data is available. You can enter emergency contacts in your Garmin Connect account.
For more information about safety and tracking features, go to garmin.com/safety.
Assistance: Allows you to send a message with your name, LiveTrack link, and GPS location (if available) to
your emergency contacts.
Incident detection: When the Enduro watch detects an incident during certain outdoor activities, the watch
sends an automated message, LiveTrack link, and GPS location (if available) to your emergency contacts.
LiveTrack: Allows friends and family to follow your races and training activities in real time. You can invite
followers using email or social media, allowing them to view your live data on a web page.
Live Event Sharing: Allows you to send messages to friends and family during an event, providing real-time
updates.
NOTE: This feature is available only if your watch is connected to a compatible Android phone.
GroupTrack: Allows you to keep track of your connections using LiveTrack directly on screen and in real time.

Adding Emergency Contacts

Emergency contact phone numbers are used for the safety and tracking features.
1 From the Garmin Connect app, select .
2 Select Safety & Tracking > Safety Features > Emergency Contacts > Add Emergency Contacts.
3 Follow the on-screen instructions.
Your emergency contacts receive a notification when you add them as an emergency contact, and can accept or
decline your request. If a contact declines, you must choose another emergency contact.

Safety and Tracking Features 111

Adding Contacts
You can add up to 50 contacts to the Garmin Connect app. Contact emails can be used with the LiveTrack
feature. Three of these contacts can be used as emergency contacts (Adding Emergency Contacts, page 111).
1 From the Garmin Connect app, select .
2 Select Contacts.
3 Follow the on-screen instructions.
After you add contacts, you must sync your data to apply the changes to your Enduro device (Using the Garmin
Connect App, page 92).

Turning Incident Detection On and Off

CAUTION
Incident detection is a supplemental feature available only for certain outdoor activities. Incident detection
should not be relied on as a primary method to obtain emergency assistance. The Garmin Connect app does not
contact emergency services on your behalf.

NOTICE
Before you can enable incident detection on your watch, you must set up emergency contacts in the Garmin
Connect app (Adding Emergency Contacts, page 111). Your paired phone must be equipped with a data plan and
be in an area of network coverage where data is available. Your emergency contacts must be able to receive
emails or text messages (standard text messaging rates may apply).

1 From the watch face, hold .

2 Select Watch Settings > Safety & Tracking > Incident Detection.
3 Select a GPS activity.
NOTE: Incident detection is available only for certain outdoor activities.
When an incident is detected by your Enduro watch and your phone is connected, the Garmin Connect app can
send an automated text message and email with your name and GPS location (if available) to your emergency
contacts. A message appears on your device and paired phone indicating your contacts will be informed after
15 seconds have elapsed. If assistance is not needed, you can cancel the automated emergency message.

Requesting Assistance
CAUTION
Assistance is a supplemental feature and should not be relied upon as a primary method to obtain emergency
assistance. The Garmin Connect app does not contact emergency services on your behalf.

NOTICE
Before you can request assistance, you must set up emergency contacts in the Garmin Connect app (Adding
Emergency Contacts, page 111). Your paired phone must be equipped with a data plan and be in an area of
network coverage where data is available. Your emergency contacts must be able to receive emails or text
messages (standard text messaging rates may apply).

1 Hold .
2 When you feel three vibrations, release the button to activate the assistance feature.
The countdown screen appears.
TIP: You can select Cancel before the countdown is complete to cancel the message.

112 Safety and Tracking Features

Starting a GroupTrack Session
NOTICE
Your paired phone must be equipped with a data plan and be in an area of network coverage where data is
available.
Before you can start a GroupTrack session, you must pair the watch with a compatible phone (Pairing Your
Phone, page 88).
These instructions are for starting a GroupTrack session with a Enduro watch. If your connections have other
compatible devices, you can see them on the map. The other devices may not be able to display GroupTrack
riders on the map.

1 On the Enduro watch, hold , and select Watch Settings > Safety & Tracking > LiveTrack > GroupTrack.
2 Select an option:
• Select Visible To to enable GroupTrack sessions for all of your Garmin Connect connections or only
invited connections.
• Select Show on Map to enable viewing connections on the map screen
• Select Activity Types to select which activity types appear on the map screen during a GroupTrack
session.
3 On the watch, start an outdoor activity.
4 Scroll to the map to view your connections.

Tips for GroupTrack Sessions

The GroupTrack feature allows you to keep track of other connections in your group using LiveTrack directly on
the screen. All members of the group must be your connections in your Garmin Connect account.
• Start your activity outside using GPS.
• Pair your Enduro device with your phone using Bluetooth technology.
• In the Garmin Connect app, select > Connections to update the list of connections for your GroupTrack
session.
• Make sure all of your connections pair with their phones and start a LiveTrack session in the Garmin Connect
app.
• Make sure all your connections are in range (40 km or 25 mi.).
• During a GroupTrack session, scroll to the map to view your connections (Adding a Map to an Activity,
page 44).

Music
NOTE: There are three different music playback options for your Enduro watch.
• Third-party provider music
• Personal audio content
• Music stored on your phone
On a Enduro watch, you can download audio content to your watch from your computer or from a third-party
provider, so you can listen when your phone is not nearby. To listen to audio content stored on your watch, you
can connect Bluetooth headphones.

Music 113
Connecting to a Third-Party Provider
Before you can download music or other audio files to your compatible watch from a supported third-party
provider, you must connect to the provider using the Garmin Connect app.
1 From the Garmin Connect app, select .
2 Select Garmin Devices, and select your watch.
3 Select Music > Music Providers.
4 Select an option:
• To connect to an installed provider, select a provider, and follow the on-screen instructions.
• To connect to a new provider, select Get Music Apps, locate a provider, and follow the on-screen
instructions.

Downloading Audio Content from a Third-Party Provider

Before you can download audio content from a third-party provider, you must connect to a Wi‑Fi network
(Connecting to a Wi‑Fi Network, page 90).

1 Hold from any screen to open the music controls.

2 Hold .
3 Select Music Providers.
4 Select a connected provider.
5 Select a playlist or other item to download to the watch.

6 If necessary, press until you are prompted to sync with the service.
NOTE: Downloading audio content can drain the battery. You may be required to connect the watch to an
external power source if the battery is low.

Downloading Personal Audio Content

Before you can send your personal music to your watch, you must install the Garmin Express application on
your computer (garmin.com/express).
You can load your personal audio files, such as .mp3 and .m4a files, to a Enduro watch from your computer. For
more information, go to garmin.com/musicfiles.
1 Connect the watch to your computer using the included USB cable.
2 On your computer, open the Garmin Express application, select your watch, and select Music.
TIP: For Windows computers, you can select and browse to the folder with your audio files. For Apple
®

computers, the Garmin Express application uses your iTunes library.

®

3 In the My Music or iTunes Library list, select an audio file category, such as songs or playlists.
4 Select the checkboxes for the audio files, and select Send to Device.
5 If necessary, in the Enduro list, select a category, select the checkboxes, and select Remove From Device to
remove audio files.

114 Music
Listening to Music
1 Hold from any screen to open the music controls.
2 If necessary, connect your Bluetooth headphones (Connecting Bluetooth Headphones, page 115).

3 Hold .
4 Select Music Providers, and select an option:
• To listen to music downloaded to the watch from your computer, select My Music (Downloading Personal
Audio Content, page 114).
• To control music playback on your phone, select Control Phone.
• To listen to music from a third-party provider, select the name of the provider, and select a playlist.
5 Select .

Music Playback Controls

NOTE: Music playback controls may look different, depending on the selected music source.

Select to view more music playback controls.

Select to browse the audio files and playlists for the selected source.

Select to adjust the volume.

Select to play and pause the current audio file.

Select to skip to the next audio file in the playlist.

Hold to fast forward through the current audio file.

Select to restart the current audio file.

Select twice to skip to the previous audio file in the playlist.
Hold to rewind through the current audio file.

Select to change the repeat mode.

Select to change the shuffle mode.

Connecting Bluetooth Headphones

To listen to music loaded onto your Enduro watch, you must connect Bluetooth headphones.
1 Bring the headphones within 2 m (6.6 ft.) of your watch.
2 Enable pairing mode on the headphones.

3 From the watch face, hold .

4 Select Watch Settings > Music > Headphones > Add New.
5 Select your headphones to complete the pairing process.

Changing the Audio Mode

You can change the music playback mode from stereo to mono.

1 From the watch face, hold .

2 Select Watch Settings > Music > Audio.
3 Select an option.

Music 115
 User Profile
You can update your user profile on your watch or on the Garmin Connect app.

Setting Up Your User Profile

You can update your sex, date of birth, height, weight, wrist, heart rate zone, power zone, and Critical Swim
Speed (CSS) settings. The watch uses this information to calculate accurate training data.

1 From the watch face, hold .

2 Select Watch Settings > User Profile.
3 Select an option.

Gender Settings
When you first set up the watch, you must choose a sex. Most fitness and training algorithms are binary. For the
most accurate results, Garmin recommends selecting your sex assigned at birth. After the initial setup, you can
customize the profile settings in your Garmin Connect account.
Profile & Privacy: Enables you to customize the data on your public profile.
User Settings: Sets your sex. If you select Not Specified, the algorithms that require a binary input will use the
sex you specified when you first set up the watch.

Viewing Your Fitness Age

Your fitness age gives you an idea of how your fitness compares with a person of the same sex. Your watch
uses information, such as your age, body mass index (BMI), resting heart rate data, and vigorous activity history
to provide a fitness age. If you have an Index™ scale, your watch uses the body fat percentage metric instead of
BMI to determine your fitness age. Exercise and lifestyle changes can impact your fitness age.
NOTE: For the most accurate fitness age, complete the user profile setup (Setting Up Your User Profile,
page 116).

1 From the watch face, hold .

2 Select Watch Settings > User Profile > Fitness Age.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase their cardiovascular strength and improve their
level of fitness. A heart rate zone is a set range of heartbeats per minute. The five commonly accepted
heart rate zones are numbered from 1 to 5 according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.

Fitness Goals
Knowing your heart rate zones can help you measure and improve your fitness by understanding and applying
these principles.
• Your heart rate is a good measure of exercise intensity.
• Training in certain heart rate zones can help you improve cardiovascular capacity and strength.
If you know your maximum heart rate, you can use the table (Heart Rate Zone Calculations, page 118) to
determine the best heart rate zone for your fitness objectives.
If you do not know your maximum heart rate, use one of the calculators available on the Internet. Some gyms
and health centers can provide a test that measures maximum heart rate. The default maximum heart rate is
220 minus your age.

116 User Profile

Setting Your Heart Rate Zones
The watch uses your user profile information from the initial setup to determine your default heart rate zones.
You can set separate heart rate zones for sport profiles, such as running, cycling, and swimming. For the most
accurate calorie data during your activity, set your maximum heart rate. You can also set each heart rate zone
and enter your resting heart rate manually. You can manually adjust your zones on the watch or using your
Garmin Connect account.

1 From the watch face, hold .

2 Select Watch Settings > User Profile > Heart Rate & Power Zones > Heart Rate.
3 Select Max. Heart Rate, and enter your maximum heart rate.
You can use the Auto Detection feature to automatically record your maximum heart rate during an activity
(Detecting Performance Measurements Automatically, page 118).
4 Select LTHR, and enter your lactate threshold heart rate.
You can perform a guided test to estimate your lactate threshold (Lactate Threshold, page 64). You can
use the Auto Detection feature to automatically record your lactate threshold during an activity (Detecting
Performance Measurements Automatically, page 118).
5 Select Resting HR > Set Custom, and enter your resting heart rate.
You can use the average resting heart rate measured by your watch, or you can set a custom resting heart
rate.
6 Select Zones > Based On.
7 Select an option:
• Select BPM to view and edit the zones in beats per minute.
• Select %Max. HR to view and edit the zones as a percentage of your maximum heart rate.
• Select %HRR to view and edit the zones as a percentage of your heart rate reserve (maximum heart rate
minus resting heart rate).
• Select %LTHR to view and edit the zones as a percentage of your lactate threshold heart rate.
8 Select a zone, and enter a value for each zone.
9 Select Sport Heart Rate, and select a sport profile to add separate heart rate zones (optional).
10 Repeat the steps to add sport heart rate zones (optional).

Letting the Watch Set Your Heart Rate Zones

The default settings allow the watch to detect your maximum heart rate and set your heart rate zones as a
percentage of your maximum heart rate.
• Verify that your user profile settings are accurate (Setting Up Your User Profile, page 116).
• Run often with the wrist or chest heart rate monitor.
• Try a few heart rate training plans, available from your Garmin Connect account.
• View your heart rate trends and time in zones using your Garmin Connect account.

User Profile 117

Heart Rate Zone Calculations
% of Maximum Heart
Zone Perceived Exertion Benefits
Rate

Beginning-level aerobic training,

1 50–60% Relaxed, easy pace, rhythmic breathing
reduces stress

Comfortable pace, slightly deeper Basic cardiovascular training, good

2 60–70%
breathing, conversation possible recovery pace

Moderate pace, more difficult to hold Improved aerobic capacity, optimal

3 70–80%
conversation cardiovascular training

Fast pace and a bit uncomfortable, Improved anaerobic capacity and

4 80–90%
breathing forceful threshold, improved speed

Sprinting pace, unsustainable for long Anaerobic and muscular endurance,

5 90–100%
period of time, labored breathing increased power

Setting Your Power Zones

The power zones use default values based on gender, weight, and average ability, and may not match your
personal abilities. If you know your functional threshold power (FTP) or threshold power (TP) value, you can
enter it and allow the software to calculate your power zones automatically. You can manually adjust your
zones on the watch or using your Garmin Connect account.

1 From the watch face, hold .

2 Select Watch Settings > User Profile > Heart Rate & Power Zones > Power.
3 Select an activity.
4 Select Based On.
5 Select an option:
• Select Watts to view and edit the zones in watts.
• Select % of FTP or % of TP to view and edit the zones as a percentage of your threshold power.
6 Select FTP or Threshold Power, and enter your value.
You can use the Auto Detection feature to automatically record your threshold power during an activity
(Detecting Performance Measurements Automatically, page 118).
7 Select a zone, and enter a value for each zone.
8 If necessary, select Minimum, and enter a minimum power value.

Detecting Performance Measurements Automatically

The Auto Detection feature is turned on by default. The watch can automatically detect your maximum heart
rate and lactate threshold during an activity. When paired with a compatible power meter, the watch can
automatically detect your functional threshold power (FTP) during an activity.

1 From the watch face, hold .

2 Select Watch Settings > User Profile > Heart Rate & Power Zones > Auto Detection.
3 Select an option.

118 User Profile

 Power Manager Settings
From the watch face, hold , and select Watch Settings > Power Manager.
Battery Saver: Customizes system settings to extend battery life in watch mode (Customizing the Battery Saver
Feature, page 119).
Activity Power Modes: Customizes system settings to extend battery life during an activity (Customizing Power
Modes, page 120).
Battery Percentage: Displays remaining battery life as a percentage.
Battery Estimates: Displays remaining battery life as an estimated number of days or hours.
Low Battery Alert: Notifies you when the battery level is low.

Customizing the Battery Saver Feature

The battery saver feature allows you to quickly adjust system settings to extend battery life in watch mode.
You can turn on the battery saver feature from the controls menu (Controls, page 51).

1 From the watch face, hold .

2 Select Watch Settings > Power Manager > Battery Saver.
3 Select Status to turn on the battery saver feature.
4 Select Edit, and select an option:
• Select Watch Face to enable a low-power watch face that updates once per minute.
• Select Music to disable listening to music from your watch.
• Select Phone to disconnect your paired phone.
• Select Wi-Fi to disconnect from a Wi‑Fi network.
• Select Wrist Heart Rate to turn off the wrist heart rate monitor.
• Select Pulse Oximeter to turn off the pulse oximeter sensor.
• Select Display to turn off the screen when not in use.
• Select Brightness to reduce the screen brightness.
The watch displays the hours of battery life gained with each setting change.
5 Select Low Battery Alert to receive an alert when the battery level is low.

Customizing the Power Mode for an Activity

You can customize the power mode settings for individual activities.

1 From the watch face, press .

2 Select Activities, and select an activity.

3 Press , and select Activity Options > Power Mode.

4 Select an option.
The watch displays the hours of battery life available with the selected power mode.
5 Select an option:
• To change the default power mode for the activity, select Default Mode.
• To change when the low battery alert appears for the activity, select Low Battery Alert.
• To change when the power mode automatically changes when the battery is low, select Auto Enable
Time.
• To automatically change the power mode when the low battery alert appears, select Auto Enable Mode.

Power Manager Settings 119

Customizing Power Modes
Your device comes preloaded with several power modes, allowing you to quickly adjust system settings, activity
settings, and GPS settings to extend battery life during an activity. You can customize existing power modes
and create new custom power modes.

1 From the watch face, hold .

2 Select Watch Settings > Power Manager > Activity Power Modes.
3 Select an option:
• Select a power mode to customize.
• Select Add New to create a custom power mode.
4 If necessary, enter a custom name.
5 Select an option to customize specific power mode settings.
For example, you can change the GPS setting or disconnect your paired phone.
The watch displays the hours of battery life gained with each setting change.
6 If necessary, select Done to save and use the custom power mode.

System Settings
From the watch face, hold , and select Watch Settings > System.
Shortcuts: Assigns shortcuts to buttons (Customizing the Button Shortcuts, page 120).
Do Not Disturb: Enables do not disturb mode to dim the screen and disable alerts and notifications.
Compass: Calibrates the internal compass and customizes the settings (Compass, page 120).
Altimeter & Barometer: Calibrates the internal barometric altimeter and customizes the settings (Altimeter and
Barometer, page 121).
Time: Adjusts the time settings (Time Settings, page 122).
Language: Sets the language displayed on the watch.
Voice: Sets the watch voice dialect and voice type.
Advanced: Opens the advanced system settings for setting the units of measure, data recording mode, and USB
mode (Advanced System Settings, page 123).
Reset: Resets user data and settings (Resetting All Default Settings, page 123).
Software Update: Installs downloaded software updates, enables automatic updates, and allows you to
manually check for updates (Product Updates, page 128).
About: Displays device, software, license, and regulatory information (Viewing Device Information, page 123).

Customizing the Button Shortcuts

You can customize the hold function of individual buttons and combinations of buttons.

1 From the watch face, hold .

2 Select Watch Settings > System > Shortcuts.
3 Select a button or combination of buttons to customize.
4 Select a function.

Compass
The watch has a 3-axis compass with automatic calibration. The compass features and appearance change
depending on your activity, whether GPS is enabled, and whether you are navigating to a destination. You can
change the compass settings manually (Compass Settings, page 121).

120 System Settings

Setting the Compass Heading
1 From the compass glance, press .
2 Select Lock Heading.

3 Point the top of the watch toward your heading, and press .
When you deviate from the heading, the compass displays the direction from the heading and degree of
deviation.

Compass Settings
From the watch face, hold , and select Watch Settings > System > Compass.
Calibrate: Manually calibrates the compass sensor (Calibrating the Compass Manually, page 121).
Display: Sets the directional heading on the compass to letters, degrees, or milliradians.
North Ref.: Sets the north reference of the compass (Setting the North Reference, page 121).
Mode: Sets the compass to use electronic-sensor data only (On), a combination of GPS and electronic-sensor
data when moving (Auto), or GPS data only (Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that
influence magnetic fields, such as vehicles, buildings, and overhead power lines.
Your watch was already calibrated at the factory, and the watch uses automatic calibration by default. If you
experience irregular compass behavior, for example, after moving long distances or after extreme temperature
changes, you can manually calibrate the compass.

1 From the watch face, hold .

2 Select Watch Settings > System > Compass > Calibrate.
3 Move your wrist in a small figure eight motion until a message appears.
Setting the North Reference
You can set the directional reference used in calculating heading information.

1 From the watch face, hold .

2 Select Watch Settings > System > Compass > North Ref..
3 Select an option:
• To set geographic north as the heading reference, select True.
• To set the magnetic declination for your location automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select Grid.
• To set the magnetic variation value manually, select User > Mag. Variation, enter the magnetic variation,
and select Done.

Altimeter and Barometer

The watch contains an internal altimeter and barometer. The watch collects elevation and pressure data
continuously, even in low-power mode. The altimeter displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure data based on the fixed elevation where the altimeter
was most recently calibrated (Altimeter and Barometer Settings, page 122).

System Settings 121

Altimeter and Barometer Settings
From the watch face, hold , select Watch Settings > System, and select Altimeter or Barometer.
Calibrate: Manually calibrates the altimeter and barometer sensor.
Auto Cal.: Self-calibrates the sensor each time you use satellite systems.
Sensor Mode: Sets the mode for the sensor. The Auto option uses both the altimeter and barometer according
to your movement. You can use the Altimeter Only option when your activity involves changes in altitude, or
the Barometer Only option when your activity does not involve changes in altitude.
Elevation: Sets the units of measure for elevation.
Pressure: Sets the units of measure for pressure.
Barometer Plot: Sets the length of time to show on the graph for the barometer glance.
Calibrating the Barometric Altimeter
Your watch was already calibrated at the factory, and the watch uses automatic calibration at your GPS starting
point by default. You can manually calibrate the barometric altimeter if you know the correct elevation.

1 From the watch face, hold .

2 Select Watch Settings > System.
3 Select Altimeter or Barometer.
4 Select Calibrate.
5 Select an option:
• To enter the current elevation manually, select Enter Manually.
• To calibrate automatically from the digital elevation model, select Use DEM.
• To calibrate automatically from your GPS location, select Use GPS.

Time Settings
From the watch face, hold , and select Watch Settings > System > Time.
Time Format: Sets the watch to show time in a 12-hour, 24-hour, or military format.
Date Format: Sets the display order for the day, month, and year for dates.
Set Time: Sets the time zone for the watch. The Auto option sets the time zone automatically based on your
GPS position.
Time: Sets the time if the Set Time option is set to Manual.
Time Sync: Syncs the time when you change time zones, and updates the time for daylight saving time (Syncing
the Time, page 122).

Syncing the Time

Each time you turn on the watch and acquire satellites or open the Garmin Connect app on your paired phone,
the watch automatically detects your time zone and the current time of day. You can also manually sync the
time when you change time zones, and to update for daylight saving time.

1 From the watch face, hold .

2 Select Watch Settings > System > Time > Time Sync.
Wait while the watch connects to your paired phone or locates satellites (Acquiring Satellite Signals,
3 page 131).

TIP: You can press to switch the source.

122 System Settings

Advanced System Settings
From the watch face, hold , and select Watch Settings > System > Advanced.
Format: Sets general format preferences, such as the units of measure, pace and speed shown during activities,
the start of the week, and geographical position format and datum options (Changing the Units of Measure,
page 123).
Data Recording: Sets how the watch records activity data. The Smart frequency recording option (default)
allows for longer activity recordings. The Every Second recording option provides more detailed activity
recordings, but may not record entire activities that last for longer periods of time.
USB Mode: Sets the watch to use MTP (media transfer protocol) or Garmin mode when connected to a
computer.

Changing the Units of Measure

You can customize units of measure for distance, pace and speed, elevation, and more.

1 From the watch face, hold .

2 Select Watch Settings > System > Advanced > Format > Units.
3 Select a measurement type.
4 Select a unit of measure.

Resetting All Default Settings

Before you reset all default settings, you should sync the watch with the Garmin Connect app to upload your
activity data.
You can reset all of the watch settings to the factory default values.

1 From the watch face, hold .

2 Select Watch Settings > System > Reset.
3 Select an option:
• To reset all of the watch settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
• To delete all activities from the history, select Delete All Activities.
• To reset all distance and time totals, select Reset Totals.
• To reset all of the watch settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
NOTE: If you have set up a Garmin Pay wallet, this option deletes the wallet from your watch. If you have
music stored on your watch, this option deletes your stored music.

Viewing Device Information

You can view device information, such as the unit ID, software version, regulatory information, and license
agreement.

1 From the watch face, hold .

2 Select Watch Settings > System > About.

System Settings 123

Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.

1 From the watch face, hold .

2 From the settings menu, select System.
3 Select About.

Device Information
Charging the Watch
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.

NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (Device Care, page 126).
1 Plug the cable ( end) into the charging port on your watch.

2 Plug the other end of the cable into a USB-C computer port or AC adapter (15 W minimum output power).
®

The watch displays the current battery charge level.

3 If necessary, go to buy.garmin.com, or contact your Garmin dealer for information about optional
accessories and replacement parts.
4 Disconnect the watch after the battery charge level reaches 100%.

Solar Charging
The solar charging capability of the watch allows you to charge your watch while you use it.

124 Device Information

Tips for Solar Charging
To maximize the battery life of your watch, follow these tips.
• When you are wearing the watch, avoid covering the face with your sleeve.
• Regular outdoor use in sunny conditions can extend your battery life.
NOTE: The watch protects itself from overheating and stops charging automatically if the internal
temperature exceeds the solar charging temperature threshold (Specifications, page 125).
NOTE: The watch does not solar charge when connected to an external power source or when the battery is
full.

Specifications
Battery type Rechargeable, built-in lithium-ion battery

Water rating 10 ATM1

Operating and storage temperature range From -20º to 45ºC (from -4º to 113ºF)

USB charging temperature range From 0º to 45ºC (from 32º to 113ºF)

Solar charging temperature range From -20° to 80°C (from -4° to 176°F)

EU wireless frequencies and transmit power 2.4 GHz @ 19 dBm maximum

EU SAR values <0,688 W/kg torso, <0,688 W/kg limb

Battery Information
The actual battery life depends on the features enabled on your watch, such as wrist-based heart rate, phone
notifications, GPS, internal sensors, and connected sensors.

Mode Battery Life

Up to 36 days typical use

Smartwatch mode
Up to 90 days with solar2

Up to 92 days typical use

Battery saver watch mode
Unlimited with solar2

Up to 120 hours typical use

GPS only mode
Up to 320 hours with solar3

Up to 80 hours typical use

All satellite systems mode
Up to 144 hours with solar3

Up to 60 hours typical use

All satellite systems plus multi-band mode
Up to 90 hours with solar4

All satellite systems with music mode Up to 22 hours typical use

Up to 210 hours typical use

Max. battery GPS mode
Unlimited with solar3

Up to 77 days typical use

Expedition GPS mode
Unlimited with solar2

1 The device withstands pressure equivalent to a depth of 100 m. For more information, go to www.garmin.com/waterrating.
2 Assuming all-day wear with 3 hours per day outside in 50,000 lux conditions
3 Assuming use in 50,000 lux conditions
4 Assuming use in 50,000 lux conditions and typical use with SatIQ technology

Device Information 125

Device Care
NOTICE
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.
Avoid pressing the buttons under water.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.

Cleaning the Watch

CAUTION
Some users may experience skin irritation after prolonged use of the watch, especially if the user has sensitive
skin or allergies. If you notice any skin irritation, remove the watch and give your skin time to heal. To help
prevent skin irritation, ensure the watch is clean and dry, and do not overtighten the watch on your wrist.

NOTICE
Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data transfer.
TIP: For more information, go to garmin.com/fitandcare.
1 Rinse with water, or use a damp lint-free cloth.
2 Allow the watch to dry completely.

Cleaning the Nylon Strap

• Hand wash the nylon strap with a mild detergent, such as dishwashing liquid.
• Do not put the nylon strap in a washing machine or dryer.
• When drying the nylon strap, hang it up or lay it flat, and allow it to dry completely.
• For more information, go to garmin.com/fitandcare.

126 Device Information

Changing the UltraFit 2 Nylon Strap
TIP: To watch a video of the watch strap installation, go to garmin.com/videos/ultrafit-install.
1 With the adhesive side facing up, pull the flexible end of the strap down through the opening at the
bottom of the watch body.

2 Pull the flexible end of the strap down through the opening at the top of the watch body.
3 Attach the hook and loop closures on the flexible end of the strap .

4 Put the watch on your wrist.

5 Attach the hook and loop closures on the other end of the strap to fit your wrist.

Device Information 127

Changing the QuickFit Bands
®

1 Slide the latch on the QuickFit band, and remove the band from the watch.

2 Align the new band with the watch.

3 Press the band into place.
NOTE: Make sure the band is secure. The latch should close over the watch pin.
4 Repeat steps 1 through 3 to change the other band.

Troubleshooting
Product Updates
Your device automatically checks for updates when connected to Bluetooth or Wi‑Fi. You can manually check
for updates from the system settings (System Settings, page 120). On your computer, install Garmin Express
(www.garmin.com/express). On your phone, install the Garmin Connect app.
This provides easy access to these services for Garmin devices:
• Software updates
• Map updates
• Course updates
• Data uploads to Garmin Connect
• Product registration

Getting More Information

You can find more information about this product on the Garmin website.
• Go to support.garmin.com for additional manuals, articles, and software updates.
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
• Go to www.garmin.com/ataccuracy for information about feature accuracy.
This is not a medical device.

128 Troubleshooting
My device is in the wrong language
You can change the watch language selection if you have accidently selected the wrong language.

1 From the watch face, hold .

2 Select .
3 Select .

4 Scroll to the seventh item in the list, and press .

5 Select your language.

Tips for Maximizing the Battery Life

To extend the life of the battery, you can try these tips.
• Change the power mode during an activity (Customizing the Power Mode for an Activity, page 119).
• Turn on the battery saver feature from the controls menu (Controls, page 51).
• Reduce the screen timeout (Display and Brightness Settings, page 82).
• Reduce the screen brightness (Display and Brightness Settings, page 82).
• Use UltraTrac satellite mode for your activity (Satellite Settings, page 49).
• Turn off Bluetooth technology when you are not using connected features (Controls, page 51).
• When pausing your activity for a longer period of time, use the Resume Later option (Stopping an Activity,
page 18).
• Use a watch face that is not updated every second.
For example, use a watch face without a second hand (Customizing the Watch Face, page 4).
• Limit the phone notifications the watch displays (Managing Notifications, page 89).
• Stop broadcasting heart rate data to paired devices (Broadcasting Heart Rate Data, page 99).
• Turn off wrist-based heart rate monitoring (Wrist Heart Rate Monitor Settings, page 98).
NOTE: Wrist-based heart rate monitoring is used to calculate vigorous intensity minutes and calories burned.
• Turn on manual pulse oximeter readings (Setting the Pulse Oximeter Mode, page 100).

Restarting Your Watch

If your watch stops responding, you can try these steps to restart it.

• Hold until the watch turns off, and hold to turn on the watch.
• Plug the watch into a USB-C charging port for at least 30 seconds, unplug the cable, and plug the cable in
again.

Is my phone compatible with my watch?

The Enduro watch is compatible with phones using Bluetooth technology.
Go to garmin.com/ble for Bluetooth compatibility information.

Troubleshooting 129
My phone will not connect to the watch
If your phone will not connect to the watch, you can try these tips.
• Turn off your phone and your watch, and turn them back on again.
• Enable Bluetooth technology on your phone.
• Update the Garmin Connect app to the latest version.
• Remove your watch from the Garmin Connect app and the Bluetooth settings on your phone to retry the
pairing process.
• If you bought a new phone, remove your watch from the Garmin Connect app on the phone you intend to stop
using.
• Bring your phone within 10 m (33 ft.) of the watch.
• On your phone, open the Garmin Connect app, and select > Garmin Devices > Add Device to enter pairing
mode.

• From the watch face, hold , and select Watch Settings > Connectivity > Phone > Pair Phone.

Can I use my Bluetooth sensor with my watch?

The watch is compatible with some Bluetooth sensors. The first time you connect a sensor to your Garmin
watch, you must pair the watch and sensor. After they are paired, the watch connects to the sensor
automatically when you start an activity and the sensor is active and within range.

1 From the watch face, hold .

2 Select Watch Settings > Connectivity > Sensors & Accessories > Add New.
3 Select an option:
• Select Search All.
• Select your sensor type.
You can customize the optional data fields (Customizing the Data Screens, page 44).

My headphones will not connect to the watch

If your Bluetooth headphones were previously connected to your phone, they may connect to your phone
automatically instead of connecting to your watch. You can try these tips.
• Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for more information.
• Stay 10 m (33 ft.) away from your phone while connecting your headphones to your watch.
• Pair your headphones with your watch (Connecting Bluetooth Headphones, page 115).

My music cuts out or my headphones won't stay connected

When using a Enduro watch connected to Bluetooth headphones, the signal is strongest when there is a direct
line of sight between the watch and the antenna on the headphones.
• If the signal passes through your body, you may experience signal loss or your headphones may become
disconnected.
• If you wear your Enduro watch on your left wrist, you should make sure the headphone's Bluetooth antenna is
on your left ear.
• Since headphones vary by model, you can try wearing the watch on your other wrist.
• If you are using metal or leather watch bands, you can switch to silicone watch bands to improve signal
strength.

130 Troubleshooting
How can I undo a lap button press?
During an activity, you might accidently press the lap button. In most cases, appears on the screen, and you
will have a few seconds to discard the most recent lap or sport change. The lap undo feature is available for
activities that support manual laps, manual sport changes, and automatic sport changes. The lap undo feature
is not available for activities that trigger automatic laps, runs, rests, or pauses, such as gym activities, pool
swimming, and workouts.

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically
based on the GPS position.
TIP: For more information about GPS, go to garmin.com/aboutGPS.
1 Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2 Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.

Improving GPS Satellite Reception

• Frequently sync the watch to your Garmin account:
◦ Connect your watch to a computer using the USB cable and the Garmin Express application.
◦ Sync your watch to the Garmin Connect app using your Bluetooth enabled phone.
◦ Connect your watch to your Garmin account using a Wi‑Fi wireless network.
While connected to your Garmin account, the watch downloads several days of satellite data, allowing it to
quickly locate satellite signals.
• Take your watch outside to an open area away from tall buildings and trees.
• Remain stationary for a few minutes.

The heart rate on my watch is not accurate

For more information on your heart rate sensor, go to garmin.com/heartrate.

The activity temperature reading is not accurate

Your body temperature affects the temperature reading for the internal temperature sensor. To get the most
accurate temperature reading, you should remove the watch from your wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature sensor to view accurate ambient temperature
readings while wearing the watch.

Exiting Demo Mode

Demo mode shows a preview of features on your watch.

1 Press eight times.

2 Select .

Activity Tracking
For more information about activity tracking accuracy, go to garmin.com/ataccuracy.

Troubleshooting 131
My step count does not seem accurate
If your step count does not seem accurate, you can try these tips.
• Wear the watch on your non-dominant wrist.
• Carry the watch in your pocket when pushing a stroller or lawn mower.
• Carry the watch in your pocket when actively using your hands or arms only.
NOTE: The watch may interpret some repetitive motions, such as washing dishes, folding laundry, or clapping
your hands, as steps.

The step counts on my watch and my Garmin Connect account don't match
The step count on your Garmin Connect account updates when you sync your watch.
1 Select an option:
• Sync your step count with the Garmin Express application (Using Garmin Connect on Your Computer,
page 93).
• Sync your step count with the Garmin Connect app (Using the Garmin Connect App, page 92).
2 Wait while your data syncs.
Syncing can take several minutes.
NOTE: Refreshing the Garmin Connect app or the Garmin Express application does not sync your data or
update your step count.

The floors climbed amount does not seem accurate

Your watch uses an internal barometer to measure elevation changes as you climb floors. A floor climbed is
equal to 3 m (10 ft.).
• Avoid holding handrails or skipping steps while climbing stairs.
• In windy environments, cover the watch with your sleeve or jacket as strong gusts can cause erratic readings.

132 Troubleshooting
 Appendix
Data Fields
NOTE: Not all data fields are available for all activity types. Some data fields require ANT+ or Bluetooth
accessories to display data. Some data fields appear in more than one category on the watch.
TIP: You can also customize the data fields from the watch settings in the Garmin Connect app.
Cadence Fields
Name Description

Average Cadence Cycling. The average cadence for the current activity.

Average Cadence Running. The average cadence for the current activity.

Cycling. The number of revolutions of the crank arm. Your device must be connected to a
Cadence
cadence accessory for this data to appear.

Cadence Running. The steps per minute (right and left).

Lap Cadence Cycling. The average cadence for the current lap.

Lap Cadence Running. The average cadence for the current lap.

Last Lap Cadence Cycling. The average cadence for the last completed lap.

Last Lap Cadence Running. The average cadence for the last completed lap.

Charts
Name Description

Barometer Chart A chart showing the barometric pressure over time.

Elevation Chart A chart showing the elevation over time.

Heart Rate Chart A chart showing your heart rate throughout the activity.

Pace Chart A chart showing your pace throughout the activity.

Power Chart A chart showing your power throughout the activity.

Speed Chart A chart showing your speed throughout the activity.

Compass Fields
Name Description

Compass Heading The direction you are moving based on the compass.

GPS Heading The direction you are moving based on GPS.

Heading The direction you are moving.

Appendix 133
Distance Fields
Name Description

Distance The distance traveled for the current track or activity.

Int. Distance The distance traveled for the current interval.

Lap Distance The distance traveled for the current lap.

Last Lap Distance The distance traveled for the last completed lap.

Nautical Distance The distance traveled in nautical meters or nautical feet.

Elevation Fields
Name Description

Average Ascent The average vertical distance of ascent since the last reset.

Average Descent The average vertical distance of descent since the last reset.

Elevation The altitude of your current location above or below sea level.

Glide Ratio The ratio of horizontal distance traveled to the change in vertical distance.

GPS Elevation The altitude of your current location using GPS.

The calculation of rise (elevation) over run (distance). For example, if for every 3 m
Grade
(10 ft.) you climb you travel 60 m (200 ft.), the grade is 5%.

Lap Ascent The vertical distance of ascent for the current lap.

Lap Descent The vertical distance of descent for the current lap.

Last Lap Ascent The vertical distance of ascent for the last completed lap.

Last Lap Descent The vertical distance of descent for the last completed lap.

Maximum Ascent The maximum rate of ascent in feet per minute or meters per minute since the last reset.

The maximum rate of descent in meters per minute or feet per minute since the last
Maximum Descent
reset.

Maximum Elevation The highest elevation reached since the last reset.

Minimum Elevation The lowest elevation reached since the last reset.

Total Ascent The total elevation distance ascended since the last reset.

Total Descent The total elevation distance descended since the last reset.

Floors Fields
Name Description

Floors Climbed The total number of floors climbed up for the day.

Floors Descended The total number of floors climbed down for the day.

Floors per Minute The number of floors climbed up per minute.

134 Appendix
Gears
Name Description

Di2 Battery The remaining battery power of a Di2 sensor.

Front The front bike gear from a gear position sensor.

Gear Battery The battery status of a gear position sensor.

Gear Combo The current gear combination from a gear position sensor.

Gears The front and rear bike gears from a gear position sensor.

Gear Ratio The number of teeth on the front and rear bike gears, as detected by a gear position sensor.

Rear The rear bike gear from a gear position sensor.

Graphical
Name Description

Cadence Gauge Running. A color gauge showing your current cadence range.

Compass Gauge The direction you are moving based on the compass.

A color gauge showing the left/right balance of ground contact time while
GCT Balance Gauge
running.

A color gauge showing the amount of time in each step that you spend on the
Ground Contact Time Gauge
ground while running, measured in milliseconds.

Heart Rate Gauge A color gauge showing your current heart rate zone.

Heart Rate Zones Ratio A color gauge showing the ratio of time spent in each heart rate zone.

PacePro Gauge Running. Your current split pace and your target split pace.

Power Gauge A color gauge showing your current power zone.

Stamina Gauge (Dist.) A gauge showing your current stamina distance remaining.

Stamina Gauge (Time) A gauge showing your current stamina time remaining.

Total Ascent/Descent The total elevation distances ascended and descended during the activity or
Gauge since the last reset.

Training Effect Gauge The impact of the current activity on your aerobic and anaerobic fitness levels.

Vertical Oscillation Gauge A color gauge showing the amount of bounce while you are running.

Vertical Ratio Gauge A color gauge showing the ratio of vertical oscillation to stride length.

Appendix 135
Heart Rate Fields
Name Description

The percentage of heart rate reserve (maximum heart rate minus resting heart
% Heart Rate Reserve
rate).

Aerobic Training Effect The impact of the current activity on your aerobic fitness level.

Anaerobic Training Effect The impact of the current activity on your anaerobic fitness level.

The average percentage of heart rate reserve (maximum heart rate minus resting
Avg. %HRR
heart rate) for the current activity.

Average HR The average heart rate for the current activity.

Avg. HR %Max. The average percentage of maximum heart rate for the current activity.

Your heart rate in beats per minute (bpm). Your device must have wrist-based heart
Heart Rate
rate or be connected to a compatible heart rate monitor.

HR %Max. The percentage of maximum heart rate.

The current range of your heart rate (1 to 5). The default zones are based on your
HR Zone
user profile and maximum heart rate (220 minus your age).

The average percentage of heart rate reserve (maximum heart rate minus resting
Int. Avg. %HRR
heart rate) for the current swim interval.

Int. Avg. %Max. The average percentage of maximum heart rate for the current swim interval.

Int. Avg. HR The average heart rate for the current swim interval.

The maximum percentage of heart rate reserve (maximum heart rate minus resting
Int. Max. %HRR
heart rate) for the current swim interval.

Int. Max. %Max. The maximum percentage of maximum heart rate for the current swim interval.

Int. Max. HR The maximum heart rate for the current swim interval.

The average percentage of heart rate reserve (maximum heart rate minus resting
Lap %HRR
heart rate) for the current lap.

Lap HR The average heart rate for the current lap.

Lap HR %Max. The average percentage of maximum heart rate for the current lap.

The average percentage of heart rate reserve (maximum heart rate minus resting
Last Lap %HRR
heart rate) for the last completed lap.

Last Lap HR The average heart rate for the last completed lap.

L. Lap HR %Max. The average percentage of maximum heart rate for the last completed lap.

Time in Zone The time elapsed in each heart rate zone.

Lengths Fields
Name Description

Interval Lengths The number of pool lengths completed during the current interval.

Lengths The number of pool lengths completed during the current activity.

136 Appendix
Navigation Fields
Name Description

The direction from your current location to a destination. You must be navigating for this
Bearing
data to appear.

The direction from your starting location to a destination. Course can be viewed as a
Course
planned or set route. You must be navigating for this data to appear.

Destination
The position of your final destination.
Location

Destination The last point on the route to the destination. You must be navigating for this data to
Waypoint appear.

The remaining distance to the final destination. You must be navigating for this data to
Distance Remaining
appear.

The remaining distance to the next waypoint on the route. You must be navigating for
Distance To Next
this data to appear.

Estimated Total The estimated distance from the start to the final destination. You must be navigating
Distance for this data to appear.

The estimated time of day when you will reach the final destination (adjusted to the local
ETA
time of the destination). You must be navigating for this data to appear.

The estimated time of day when you will reach the next waypoint on the route (adjusted
ETA at Next
to the local time of the waypoint). You must be navigating for this data to appear.

The estimated time remaining until you reach the final destination. You must be navi­
ETE
gating for this data to appear.

Glide Ratio to Desti­ The glide ratio required to descend from your current position to the destination
nation elevation. You must be navigating for this data to appear.

The current position in latitude and longitude regardless of the selected position format
Lat/Lon
setting.

Location The current position using the selected position format setting.

Next Fork The distance to the next fork on a trail based on the NextFork™ map guide.

Next Waypoint The next point on the route. You must be navigating for this data to appear.

The distance to the left or right by which you have strayed from the original path of
Off Course
travel. You must be navigating for this data to appear.

The estimated time remaining before you reach the next waypoint in the route. You must
Time to Next
be navigating for this data to appear.

The speed at which you are closing on a destination along a route. You must be navi­
Velocity Made Good
gating for this data to appear.

Vertical Dist. to The elevation distance between your current position and the final destination. You must
Dest. be navigating for this data to appear.

Vertical Speed to The rate of ascent or descent to a predetermined altitude. You must be navigating for
Target this data to appear.

Appendix 137
Other Fields
Name Description

Active Calories The calories burned during the activity.

Ambient Pressure The uncalibrated environmental pressure.

Barometric Pressure The current calibrated environmental pressure.

Battery Hours The number of hours remaining before the battery power is depleted.

Battery Level The remaining battery power.

eBike Battery The remaining battery power of an ebike.

eBike Range The estimated remaining distance the ebike can provide assistance.

The measurement of how consistently you maintain speed and smoothness through
Flow
turns in the current activity.

GPS The strength of the GPS satellite signal.

The measurement of difficulty for the current activity based on elevation, gradient,
Grit
and rapid changes in direction.

Intervals The number of intervals completed for the current activity.

Lap Flow The overall flow score for the current lap.

Lap Grit The overall grit score for the current lap.

Laps The number of laps completed for the current activity.

Last Round Reps The number of repetitions in the last round of the activity.

The training load for the current activity. Training load is the amount of excess post-
Load exercise oxygen consumption (EPOC), which indicates the strenuousness of your
workout.

Performance Condition The performance condition score is a real-time assessment of your ability to perform.

Reps During a gym activity, the number of repetitions in a workout set.

Respiration Rate Your respiration rate in breaths per minute (brpm).

Rounds The number of exercise groups performed in an activity, such as jump rope.

Steps The number of steps taken during the current activity.

Stress Your current stress level.

Sunrise The time of sunrise based on your GPS position.

Sunset The time of sunset based on your GPS position.

The time of day based on your current location and time settings (format, time zone,
Time of Day
daylight saving time).

Total Calories The amount of total calories burned for the day.

138 Appendix
Pace Fields
Name Description

500m Pace The current rowing pace per 500 meters.

Average 500m Pace The average rowing pace per 500 meters for the current activity.

Average Pace The average pace for the current activity.

Grade Adjusted Pace The average pace adjusted by the steepness of the terrain.

Int. Pace The average pace for the current interval.

Lap 500m Pace The average rowing pace per 500 meters for the current lap.

Lap Pace The average pace for the current lap.

Last Lap 500m Pace The average rowing pace per 500 meters for the last lap.

Last Lap Pace The average pace for the last completed lap.

Last Len. Pace The average pace for your last completed pool length.

Pace The current pace.

PacePro Fields
Name Description

Next Split Distance Running. The total distance of the next split.

Next Split Target Pace Running. The target pace for the next split.

Split Distance Running. The total distance of the current split.

Split Distance Remaining Running. The remaining distance of the current split.

Split Pace Running. The pace for the current split.

Split Target Pace Running. The target pace for the current split.

Appendix 139
Power Fields
Name Description

% FTP The current power output as a percentage of functional threshold power.

3s Avg. Balance The 3-second moving average of the left/right power balance.

3s Power The 3-second moving average of power output.

3s Power to Weight The 3-second average power measured in watts per kilogram for the current activity.

10s Avg. Balance The 10-second moving average of the left/right power balance.

10s Power The 10-second moving average of power output.

10s Power to Weight The 10-second average power measured in watts per kilogram for the current activity.

30s Avg. Balance The 30-second moving average of the left/right power balance.

30s Power The 30-second moving average of power output.

30s Power to Weight The 30-second average power measured in watts per kilogram for the current activity.

Avg. Balance The average left/right power balance for the current activity.

Average Left PP The average power phase angle for the left leg for the current activity.

Avg. Power The average power output for the current activity.

Avg. Right PP The average power phase angle for the right leg for the current activity.

Avg. Left PPP The average power phase peak angle for the left leg for the current activity.

Avg. PCO The average platform center offset for the current activity.

Avg. Power to Weight The average power measured in watts per kilogram for the current activity.

Avg. Right PPP The average power phase peak angle for the right leg for the current activity.

Balance The current left/right power balance.

Intensity Factor The Intensity Factor™ for the current activity.

Lap Balance The average left/right power balance for the current lap.

Lap Left PPP The average power phase peak angle for the left leg for the current lap.

Lap Left PP The average power phase angle for the left leg for the current lap.

Lap Max. Power The top power output for the current lap.

Lap NP The average Normalized Power™ for the current lap.

Lap PCO The average platform center offset for the current lap.

Lap Power The average power output for the current lap.

Lap Power to Weight The average power measured in watts per kilogram for the current lap.

Lap Right PPP The average power phase peak angle for the right leg for the current lap.

Lap Right PP The average power phase angle for the right leg for the current lap.

Last Lap Max. Power The top power output for the last completed lap.

Last Lap NP The average Normalized Power for the last completed lap.

140 Appendix
Name Description

Last Lap Power The average power output for the last completed lap.

The current power phase peak angle for the left leg. Power phase peak is the angle
Left PPP
range over which the rider produces the peak portion of the driving force.

The current power phase angle for the left leg. Power phase is the pedal stroke region
Left PP
where positive power is produced.

Max. Power The top power output for the current activity.

NP The Normalized Power for the current activity.

The measurement of how evenly a rider is applying force to the pedals throughout each
Pedal Smooth.
pedal stroke.

The platform center offset. Platform center offset is the location on the pedal platform
PCO
where force is applied.

The current power output in watts. For skiing activities, your device must be connected
Power
to a compatible heart rate monitor.

Power to Weight The current power measured in watts per kilogram.

Power Zone The current range of power output based on your FTP or custom settings.

The current power phase peak angle for the right leg. Power phase peak is the angle
Right PPP
range over which the rider produces the peak portion of the driving force.

The current power phase angle for the right leg. Power phase is the pedal stroke region
Right PP
where positive power is produced.

Time in Zone The time elapsed in each power zone.

Time Seat. The time spent seated while pedaling for the current activity.

Time Seat. Lap The time spent seated while pedaling for the current lap.

Time Stand. The time spent standing while pedaling for the current activity.

Time Stand. Lap The time spent standing while pedaling for the current lap.

TSS The Training Stress Score™ for the current activity.

Torque Eff. The measurement of how efficiently a rider is pedaling.

Work The accumulated work performed (power output) in kilojoules.

Rest Fields
Name Description

Repeat On The timer for the last interval plus the current rest (pool swimming).

Rest Timer The timer for the current rest (pool swimming).

Appendix 141
Run Dynamics
Name Description

Average GCT Balance The average ground contact time balance for the current session.

Average Ground Contact

The average amount of ground contact time for the current activity.
Time

Average Stride Length The average stride length for the current session.

Average Vertical Oscilla­

The average amount of vertical oscillation for the current activity.
tion

Average Vertical Ratio The average ratio of vertical oscillation to stride length for the current session.

GCT Balance The left/right balance of ground contact time while running.

The amount of time in each step that you spend on the ground while running,
Ground Contact Time
measured in milliseconds. Ground contact time is not calculated while walking.

Lap GCT Balance The average ground contact time balance for the current lap.

Lap Ground Contact Time The average amount of ground contact time for the current lap.

Lap Stride Length The average stride length for the current lap.

Lap Vertical Oscillation The average amount of vertical oscillation for the current lap.

Lap Vertical Ratio The average ratio of vertical oscillation to stride length for the current lap.

Stride Length The length of your stride from one footfall to the next, measured in meters.

The amount of bounce while you are running. The vertical motion of your torso,
Vertical Oscillation
measured in centimeters for each step.

Vertical Ratio The ratio of vertical oscillation to stride length.

142 Appendix
Speed Fields
Name Description

Avg. Moving Speed The average speed when moving for the current activity.

Avg. Overall Speed The average speed for the current activity, including both moving and stopped speeds.

Average Speed The average speed for the current activity.

The average speed of travel for the current activity, regardless of the course steered and
Avg. SOG
temporary variations in heading.

Lap Speed The average speed for the current lap.

Last Lap Speed The average speed for the last completed lap.

The maximum speed of travel for the current activity, regardless of the course steered
Max. SOG
and temporary variations in heading.

Maximum Speed The top speed for the current activity.

Speed The current rate of travel.

The actual speed of travel, regardless of the course steered and temporary variations in
SOG
heading.

Vertical Speed The rate of ascent or descent over time.

Stamina Fields
Name Description

Stamina The current remaining stamina.

Distance Remaining The current stamina distance remaining at the current effort.

Stamina Potential The remaining potential stamina.

Time Remaining The current stamina time remaining at the current effort.

Appendix 143
Stroke Fields
Name Description

Average Distance Per Stroke Swimming. The average distance traveled per stroke during the current activity.

Paddle sports. The average distance traveled per stroke during the current
Average Distance Per Stroke
activity.

Paddle sports. The average number of strokes per minute (spm) during the
Average Stroke Rate
current activity.

Average Strokes Per Length The average number of strokes per pool length during the current activity.

Distance Per Stroke Paddle sports. The distance traveled per stroke.

Interval Strokes Per Length The average number of strokes per pool length during the current interval.

Interval Stroke Type The current stroke type for the interval.

Lap Distance Per Stroke Swimming. The average distance traveled per stroke during the current lap.

Lap Distance Per Stroke Paddle sports. The average distance traveled per stroke during the current lap.

Swimming. The average number of strokes per minute (spm) during the current
Lap Stroke Rate
lap.

Paddle sports. The average number of strokes per minute (spm) during the
Lap Stroke Rate
current lap.

Lap Strokes Swimming. The total number of strokes for the current lap.

Lap Strokes Paddle sports. The total number of strokes for the current lap.

Swimming. The average distance traveled per stroke during the last completed
Last Lap Distance Per Stroke
lap.

Paddle sports. The average distance traveled per stroke during the last
Last Lap Distance Per Stroke
completed lap.

Swimming. The average number of strokes per minute (spm) during the last
Last Lap Stroke Rate
completed lap.

Paddle sports. The average number of strokes per minute (spm) during the last
Last Lap Stroke Rate
completed lap.

Last Lap Strokes Swimming. The total number of strokes for the last completed lap.

Last Lap Strokes Paddle sports. The total number of strokes for the last completed lap.

Last Length Strokes The total number of strokes for the last completed pool length.

Last Length Stroke Type The stroke type used during the last completed pool length.

Stroke Rate Swimming. The number of strokes per minute (spm).

Stroke Rate Paddle sports. The number of strokes per minute (spm).

Strokes Swimming. The total number of strokes for the current activity.

Strokes Paddle sports. The total number of strokes for the current activity.

144 Appendix
Swolf Fields
Name Description

The average swolf score for the current activity. Your swolf score is the sum of the time for
Average Swolf one length plus the number of strokes for that length (Swim Terminology, page 34). In open
water swimming, 25 meters is used to calculate your swolf score.

Interval Swolf The average swolf score for the current interval.

Lap Swolf The swolf score for the current lap.

Last Lap Swolf The swolf score for the last completed lap.

Last Length Swolf The swolf score for the last completed pool length.

Temperature Fields
Name Description

The maximum temperature recorded in the last 24 hours from a compatible temperature
24-Hour Maximum
sensor.

The minimum temperature recorded in the last 24 hours from a compatible temperature
24-Hour Minimum
sensor.

Avg Temperature The average temperature during the activity.

Max Temperature The maximum temperature during the activity.

Min Temperature The minimum temperature during the activity.

The temperature of the air. Your body temperature affects the temperature sensor. You
Temperature can pair a tempe sensor with your device to provide a consistent source of accurate
temperature data.

Appendix 145
Timer Fields
Name Description

Average Lap Time The average lap time for the current activity.

Average Move Time The average move time for the current activity.

Average Pose Time The average pose time for the current activity.

The total time recorded. For example, if you start the activity timer and run for 10
Elapsed Time minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes,
your elapsed time is 35 minutes.

Estimated Finish Time The estimated finish time of the current activity.

Interval Time The stopwatch time for the current interval.

Lap Time The stopwatch time for the current lap.

Last Lap Time The stopwatch time for the last completed lap.

Last Move Time The stopwatch time for the last completed move.

Last Pose Time The stopwatch time for the last completed pose.

Move Time The stopwatch time for the current move.

Moving Time The total time moving for the current activity.

Multisport Time The total time for all sports in a multisport activity, including transitions.

Overall Ahead/Behind The overall time ahead or behind of the target pace or speed.

Pose Time The stopwatch time for the current pose.

Set Timer During a strength training activity, the amount of time spent in the current workout set.

Stopped Time The total time stopped for the current activity.

Swim Time The swimming time for the current activity, not including rest time.

Timer The current time of the activity timer.

Workout Fields
Name Description

Reps to Go During a workout, the remaining repetitions.

Step Duration The time or distance remaining for the workout step.

Step Pace The current pace during the workout step.

Step Speed The current speed during the workout step.

Step Time The time elapsed for the workout step.

146 Appendix
Color Gauges and Running Dynamics Data
The running dynamics screens display a color gauge for the primary metric. You can display cadence, vertical
oscillation, ground contact time, ground contact time balance, or vertical ratio as the primary metric. The color
gauge shows you how your running dynamics data compare to those of other runners. The color zones are
based on percentiles.
Garmin has researched many runners of all different levels. The data values in the red or orange zones are
typical for less experienced or slower runners. The data values in the green, blue, or purple zones are typical
for more experienced or faster runners. More experienced runners tend to exhibit shorter ground contact times,
lower vertical oscillation, lower vertical ratio, and higher cadence than less experienced runners. However, taller
runners typically have slightly slower cadences, longer strides, and slightly higher vertical oscillation. Vertical
ratio is your vertical oscillation divided by stride length. It is not correlated with height.
Go to garmin.com/runningdynamics for more information on running dynamics. For additional theories and
interpretations of running dynamics data, you can search reputable running publications and websites.

Color Zone Percentile in Zone Cadence Range Ground Contact Time Range

Purple >95 >183 spm <218 ms

Blue 70–95 174–183 spm 218–248 ms

Green 30–69 164–173 spm 249–277 ms

Orange 5–29 153–163 spm 278–308 ms

Red <5 <153 spm >308 ms

Ground Contact Time Balance Data

Ground contact time balance measures your running symmetry and appears as a percentage of your total
ground contact time. For example, 51.3% with an arrow pointing left indicates the runner is spending more time
on the ground when on the left foot. If your data screen displays both numbers, for example 48–52, 48% is the
left foot and 52% is the right foot.

Color Zone Red Orange Green Orange Red

Symmetry Poor Fair Good Fair Poor

Percent of Other Runners 5% 25% 40% 25% 5%

Ground Contact Time Balance >52.2% L 50.8–52.2% L 50.7% L–50.7% R 50.8–52.2% R >52.2% R

While developing and testing running dynamics, the Garmin team found correlations between injuries and
greater imbalances with certain runners. For many runners, ground contact time balance tends to deviate
further from 50–50 when running up or down hills. Most running coaches agree that a symmetrical running
form is good. Elite runners tend to have quick and balanced strides.
You can watch the gauge or data field during your run or view the summary on your Garmin Connect account
after your run. As with the other running dynamics data, ground contact time balance is a quantitative
measurement to help you learn about your running form.

Appendix 147
Vertical Oscillation and Vertical Ratio Data
The data ranges for vertical oscillation and vertical ratio are slightly different depending on the sensor and
whether it is positioned at the chest (HRM-Fit or HRM-Pro series accessories) or at the waist (Running
Dynamics Pod accessory).

Percentile in Vertical Oscillation Vertical Oscillation Vertical Ratio at Vertical Ratio at

Color Zone
Zone Range at Chest Range at Waist Chest Waist

Purple >95 <6.4 cm <6.8 cm <6.1% <6.5%

Blue 70–95 6.4–8.1 cm 6.8–8.9 cm 6.1–7.4% 6.5–8.3%

Green 30–69 8.2–9.7 cm 9.0–10.9 cm 7.5–8.6% 8.4–10.0%

Orange 5–29 9.8–11.5 cm 11.0–13.0 cm 8.7–10.1% 10.1–11.9%

Red <5 >11.5 cm >13.0 cm >10.1% >11.9%

VO2 Max. Standard Ratings

These tables include standardized classifications for VO2 max. estimates by age and sex.

Males Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 55.4 54 52.5 48.9 45.7 42.1

Excellent 80 51.1 48.3 46.4 43.4 39.5 36.7

Good 60 45.4 44 42.4 39.2 35.5 32.3

Fair 40 41.7 40.5 38.5 35.6 32.3 29.4

Poor 0–40 <41.7 <40.5 <38.5 <35.6 <32.3 <29.4

Females Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 49.6 47.4 45.3 41.1 37.8 36.7

Excellent 80 43.9 42.4 39.7 36.7 33 30.9

Good 60 39.5 37.8 36.3 33 30 28.1

Fair 40 36.1 34.4 33 30.1 27.5 25.9

Poor 0–40 <36.1 <34.4 <33 <30.1 <27.5 <25.9

Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.

148 Appendix
FTP Ratings
These tables include classifications for functional threshold power (FTP) estimates by sex.

Males Watts per Kilogram (W/kg)

Superior 5.05 and greater

Excellent From 3.93 to 5.04

Good From 2.79 to 3.92

Fair From 2.23 to 2.78

Untrained Less than 2.23

Females Watts per Kilogram (W/kg)

Superior 4.30 and greater

Excellent From 3.33 to 4.29

Good From 2.36 to 3.32

Fair From 1.90 to 2.35

Untrained Less than 1.90

FTP ratings are based on research by Hunter Allen and Andrew Coggan, PhD, Training and Racing with a Power
Meter (Boulder, CO: VeloPress, 2010).

Appendix 149
Endurance Score Ratings
These tables include classifications for endurance score estimates by age and sex.

Males Recreational Intermediate Trained Well Trained Expert Superior Elite

8300 and
18-20 Less than 4999 5000-5699 5700-6299 6300-6999 7000-7599 7600-8299
greater

8800 and
21-39 Less than 5099 5100-5799 5800-6599 6600-7299 7300-8099 8100-8799
greater

8600 and
40-44 Less than 5099 5100-5799 5800-6499 6500-7199 7200-7899 7900-8599
greater

8400 and
45-49 Less than 4999 5000-5699 5700-6399 6400-6999 7000-7699 7700-8399
greater

8000 and
50-54 Less than 4899 4900-5499 5500-6099 6100-6799 6800-7399 7400-7999
greater

7300 and
55-59 Less than 4599 4600-5099 5100-5699 5700-6199 6200-6799 6800-7299
greater

6700 and
60-64 Less than 4299 4300-4799 4800-5299 5300-5699 5700-6199 6200-6699
greater

6200 and
65-69 Less than 4099 4100-4499 4500-4899 4900-5399 5400-5799 5800-6199
greater

5700 and
70-74 Less than 3799 3800-4199 4200-4599 4600-4899 4900-5299 5300-5699
greater

5300 and
75-80 Less than 3599 3600-3899 3900-4299 4300-4599 4600-4999 5000-5299
greater

80 and 5000 and

Less than 3299 3300-3599 3600-3999 4000-4299 4300-4699 4700-4999
older greater

150 Appendix
Females Recreational Intermediate Trained Well Trained Expert Superior Elite

6900 and
18-20 Less than 4599 4600-5099 5100-5499 5500-5999 6000-6399 6400-6899
greater

7300 and
21-39 Less than 4699 4700-5199 5200-5699 5700-6299 6300-6799 6800-7299
greater

7200 and
40-44 Less than 4699 4700-5199 5200-5699 5700-6199 6200-6699 6700-7199
greater

7100 and
45-49 Less than 4599 4600-5099 5100-5599 5600-6099 6100-6599 6600-7099
greater

6800 and
50-54 Less than 4499 4500-4999 5000-5399 5400-5899 5900-6299 6300-6799
greater

6400 and
55-59 Less than 4299 4300-4699 4700-5099 5100-5599 5600-5099 6000-6399
greater

6100 and
60-64 Less than 4099 4100-4499 4500-4899 4900-5299 5300-5699 5700-6099
greater

5700 and
65-69 Less than 3799 3800-4199 4200-4599 4600-4899 4900-5299 5300-5699
greater

5500 and
70-74 Less than 3699 3700-4099 4100-4399 4400-4799 4800-5099 5100-5499
greater

5200 and
75-80 Less than 3499 3500-3799 3800-4199 4200-4499 4500-4899 4900-5199
greater

80 and 4700 and

Less than 3199 3200-3499 3500-3799 3800-4099 4100-4399 4400-4699
older greater

These estimates are provided and supported by Firstbeat Analytics.

Wheel Size and Circumference

Your speed sensor automatically detects your wheel size. If necessary, you can manually enter your wheel
circumference in the speed sensor settings.
The tire size is marked on both sides of the tire. You can measure the circumference of your wheel or use one of
the calculators available on the internet.

Appendix 151
 support.garmin.com

September 2024 GUID-7AD1A592-9044-4D84-9688-7B5209F85BFF v1