10 steps
Version 2.4 for iOS
in little
1
Set Your Network Up
Update your NEXO devices and their remote control cards with
the latest firmware version.
Set up secured and robust Wi-Fi access points, with a unique
DHCP server.
*NXES104 only: Install AVS-Monitor on a computer with
Windows (PC, or Mac with virtual machine). Open AVS-Control
panel and turn on AVS-Service. /
To restrain access to your network, set up users Ethernet
with limited rights in AVS-Service.
Wi-Fi Access Point
Wi-Fi Wi-Fi
NXDT104 /
NXAE104 /
NXES104*/
DTD-N
iPad iPhone
2
Import a Session
A session is a .nemo file that contains all the devices’
data, and groups and zones. If you prepared one in
another NeMo, import it!
Edit name
Activate AirDrop. From a Mac, go to the Finder’s AirDrop
section, and drag a session onto the right iOS device. Edit
description
Or from another iOS device, press [Session], and select
a session. Edit name and description, and tap on
[Export]. Choose AirDrop. Tap to export
Accept the drop on your NeMo for iOS, and here you
are!
Session My Session
Disconnect
© 2019 NEXO SA. All rights reserved.
3
Connect and Arrange
Choose Direct Control and/or AVS-Service Connection (in case of
EtherSound or large number of devices).
Select type of Choose the session to open in NeMo and press [Config].
connection
In the Network Tab, name and place your devices.
Select a session
Create groups.
Take a picture and add it to the background.
Press Config
Your session is automatically saved while using NeMo.
View devices, groups
or zones
Add and edit groups
Manage and select groups (grouping of and zones
devices), zones (grouping of channels), Edit background
and devices (add pictures)
Status of NXAMP’s
4 channels
Tap to reveal
Dante ID
Tap to view detail
about a device
(load, setup, mac,
alias edition)
4
Choose Presets
From the Network tab or the Groups & Devices menu, select
devices or groups.
Go to the Setup tab.
Build and recall presets.
Standard or custom
setups
Select devices, groups or
zones Scroll to pick series,
cabinet, cabinet
mode and XO mode
Recall the selected
setups
Tap to bridge if
needed
Go to the Setup tab
Page 2 of 5
5
Edit Your Devices’ Settings
and EQ
Go to the Control tab.
Tap on one or several Edit one channel, or select
Patch inputs to processing channels. channels to edit them. the checkbox of several
channels.
Edit gain, delay, etc. on:
- One channel,
- Several channels, absolute or relative.
Mute and solo (NXAMP only).
Add and edit up to 8 EQ bands per channel.
Always check what is selected
Select devices, groups or
zones Absolute or relative
Edit parameters for
Drag your finger to patch, the channel 1 of the
cross a link to clear it selected NXAMPs
Tap to set the EQ of
the channel ON or
OFF
Orange = "multiple
values" Tap to edit the EQ
If a parameter (e.g. gain ch.1) is
not the same for all the selected
devices.
Slide your finger or
type a value
Smart slider: displays marks for all
the different values.
Go to the Control tab
6
Save or recall a scene
NXAMP only
Select devices or groups.
Go to the Scene tab.
Select a slot and save the scene.
Later, you will be able to recall this scene and/or
paste it to other NXAMPs.
Type a name
Press [Save],
and when later you will
need the scene, press
[Recall]
Go to the Scene tab
Page 3 of 5
7
Check up your system
Go to the Network tab and display the map of the Network
group.
On a group, press [xx devices].
Check every channel by soloing it.
Navigate through the groups
Tap to display the Quick
Mute/Solo view
Solo the channels
8
Preferences Set up alerts and record the log
Go to the preferences.
Configure alerts
In Configure Alerts, choose the alerts to show in the
Events menu.
In Configure Red Alerts, activate and set up alerts to
show as pop-up messages.
To record the log, connect, go to the Log View, choose
a Log Record, and press [R].
Configure red alerts
Create if needed and
select a Log Record
Tap to start recording
To consult the Events menu:
Associate the Log Record
with your session
Network
To go to the Log view:
Network
Page 4 of 5
9
From the welcome
view: press [Live]
From the Config
mode: press and hold
Let the show begin
Connect to the Live mode. Components are disabled.
You can go to the Preferences to configure the Live
mode.
While the show is ongoing, you can go to the quick
Tap to reveal VU-meters mute/solo view (in the Network tab, map of the groups,
cell for All devices, press [xx devices]) with VU-Meters,
or to the Log view.
When the show is over, go to the Log view and press
[R] to stop recording.
Components are
disabled
Maximum hold
Short-term hold
Current value
Minimum hold
10
Check-out the log
Go to the Preferences, select View log.
Select devices, and review the key facts and the history of the
parameters of your choosing. Plug your iDevice, go to
iTunes>Your
Export the log to process it in a spreadsheet. iDevice>Apps>File Sharing
Open Log Records menu and
press to export
Tap to stop recording
Choose devices or
groups
Scroll through time. Choose parameters
Zoom with two fingers on
the cursor, or on a graph.
Maximum
Tap on a curve to display
Average detail. Drag your finger
along the curve.
Minimum
Thanks for downloading and using NeMo! Please refer to the manual for further instructions and tips on how
to use NeMo: https://nexo-sa.com/products/nemo/. Your feedback and comments are most welcome:
[email protected]. Rate the app! http://appstore.com/nexosa.
© 2020 NEXO SA. All rights reserved. www.nexo-sa.com. NEXO SA cannot be held responsible for damages caused by improper
use of the devices, this software and its manual. The practices contained herein may not apply to every situation.
Apple, iPod Touch, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries EtherSound and EtherSound logo are
trademarks or registered trademarks of Digigram S.A. Dante and Dante logo are trademarks of Audinate Pty Ltd. Wi-Fi is a registered trademark of Wi-Fi
Alliance. Windows is a registered trademark of Microsoft Corporation. All other trademarks are the property of their owners.
Page 5 of 5
