LIQUID RING
VACUUM PUMP
AWD 200-4510
Within Atlas Copco’s full range of liquid ring vacuum pumps, the AWD offers
a two-stage construction for peak performance at low suction pressures
Atlas Copco liquid ring pumps are ideal for pumping either dry Atlas Copco design principles for easy installation, use and
or wet gasses, with a high tolerance to liquid carryover, service. AWD two stage liquid ring vacuum pumps are created
especially on condensable processes. Pumps are available in a for extreme reliability and are ideal for continuous general
variety of materials which can be selected to suit the pumped industry vacuum service below 200 mbara, particularly vacuum
process media. All AWD liquid ring pumps are available as part distillation, drying, degassing and evaporator duties.
of standard pre-configured modules manufactured according to
FEATURES AND BENEFITS
• Two stage design - peak efficiency at high vacuum. • Rugged, robust construction.
• Operates across entire vacuum range. • Minimum number of body joints.
• Mechanical shaft seals. • Externally mounted bearings.
• Choice of construction materials.
MATERIALS OF CONSTRUCTION
Cast iron Stainless steel Stainless steel fitted
Casing Cast iron 316 stainless steel Cast iron
Body Cast iron 316 stainless steel Cast iron
Impeller SG iron 316 stainless steel 316 stainless steel
Shaft 420 stainless steel 316 stainless steel 316 stainless steel
Mechanical seals SiC/C/Viton SiC/C/Viton SiC/C/Viton
TECHNICAL SPECIFICATIONS
AWD 200 AWD 400 AWD 610 AWD 1230 AWD 1680 AWD 1960 AWD 3280 AWD 4510
50 Hz
Nominal capacity (m³/h) 195 400 610 1250 1685 2000 3300 4500
Ultimate pressure (mbar(a)) 30 30 30 30 30 30 30 30
Nominal installer motor (kW) 5.5 11 22 45 55 75 110 132
Approximate block
722 x 280 x 457 873 x 280 x 457 987 x 340 x 568 1279 x 480 x 774 1379 x 480 x 774 1710 x 650 x 1034 2004 x 650 x 1034 2216 x 800 x 1301
dimensions (W x D x H) (mm)
Dry weight (kg) 90 160 222 584 760 1180 1680 2635
60 Hz
Nominal capacity (cfm) 126 283 412 853 1130 1324 2207 2884
Ultimate pressure (torr) 25 25 25 25 25 25 25 25
Nominal installer motor (hp) 10 20 40 75 100 125 175 200
6996 0046 00 © 2015, Atlas Copco Vacuum Solutions Division. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
Approximate block
28 x 11 x 18 34 x 11 x 18 39 x 13 x 22 50 x 19 x 30 54 x 19 x 30 67 x 26 41 79 x 26 x 41 87 x 31 x 51
dimensions (W x D x H) (inch)
Dry weight (lbs) 198 353 485 1287 1676 2601 3704 5809
PERFORMANCE RANGE
m³/h 6000
5000
4000
3000
2000
1000
0
AWD 200 AWD 400 AWD 610 AWD 1230 AWD 1680 AWD 1960 AWD 3280 AWD 4510
AWD pumps are available as bareshaft ‘Blocks’, motorized ‘Powerpacks’, or standard pre-configured water
recycle modules. Please refer to the TR Module brochure for further details.
www.atlascopco.com/vacuum