3516 B
Industrial Engine
1641 bkW/2200 bhp @ 1800 rpm
CAT® ENGINE SPECIFICATIONS
V-16, 4-Stroke-Cycle Diesel
Bore......................................................170.0 mm (6.69 in)
Stroke...................................................190.0 mm (7.48 in)
Displacement..................................... 69.0 L (4,210.64 in3)
Aspiration.......................................Turbocharged / SCAC
Compression Ratio...................................................14.0:1
Rotation (from flywheel end).............. Counterclockwise
Capacity for Liquids
Cooling System.................................. 233.0 L (61.6 gal)
Lube Oil System (refill)...................... 181.7 L (48.0 gal)
Engine Weight, Net Dry (approximate)
Image shown may not reflect
actual engine
FEATURES
EMISSIONS FULL RANGE OF ATTACHMENTS
Meets Tier 1 emission requirements. Tier 1 refers to Wide range of bolt-on system expansion
EPA (U.S.) non-road standards. attachments, factory designed and tested
SINGLE SOURCE SUPPLIER UNMATCHED PRODUCT SUPPORT OFFERED
Caterpillar: THROUGH WORLDWIDE CATERPILLAR DEALER
- Casts engine blocks, heads, cylinder liners, and NETWORK
flywheel housings More than 1,500 dealer outlets.
- Machines critical components Caterpillar factory-trained dealer technicians service
- Assembles complete engine every aspect of your industrial engine.
Ownership of these manufacturing processes 99.7% of parts orders filled within 24 hours
enables Caterpillar to produce high quality, worldwide.
dependable product. Caterpillar parts and labor warranty.
Preventive maintenance agreements available for
Factory-designed systems built at Caterpillar ISO repair before failure options.
9001:2000 certified facilities Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to
TESTING determine:
- internal engine component condition
Prototype testing on every model: - presence of unwanted fluids
- proves computer design - presence of combustion by-products
- verifies system torsional stability
- functionality tests every model
WEB SITE
Every Caterpillar engine is dynamometer tested For all your industrial power requirements, visit
under full load to ensure proper engine www.cat-industrial.com.
performance.
31 December 2012 9:11 AM
3516 B
Industrial Engine
STANDARD ENGINE EQUIPMENT 1641 bkW/2200 bhp @ 1800 rpm
Air Inlet System Lube System
Separate circuit aftercooler core, corrosion resistant Crankcase breather, top mounted
coated (air side), Four turbochargers, center Oil cooler
mounted Oil filler and dipstick, RH
Oil pump
Control System Oil filter, LH, spin-on type
Front sump oil pan, 250 hour change interval
Caterpillar ADEM™ II Electronic Engine Control, RH,
with electronic unit injector fuel system (10 amp DC
power required to drive electronic engine control Mounting System
module) Trunnion front support
Cooling System Power Take-Offs
Thermostats and housing Accessory drive, lower LH, Front housing, two sided
Jacket water pump, gear driven, centrifugal
Connections for radiator cooling Protection System
ADEM™ II monitoring system to provide customer
Exhaust System programmable engine, De-rate strategies to protect
Exhaust manifold, dry, Four turbochargers with against adverse operating condition, Emergency
watercooled bearings, Two exhaust outlets 203 mm stop logic inputs provided at 40-pin customer
(8 in) round flange interface connection
Flywheels and Flywheel Housings Starting System
Flywheel, SAE No. 0, 151 teeth Dual 24V electric starting motor, LH, unwired
Flywheel housing, SAE No. 0
SAE standard rotation General
Paint, Caterpillar Yellow
Fuel System Vibration damper
Fuel filter, LH spin-on type Lifting eyes
Fuel transfer pump
Electronically controlled unit injectors Note
These engines are not configured properly for
Instrumentation application in hydraulic excavators or front shovels.
No standard instrumentation, Optional, remote To obtain proper rating and configuration for
instrumentation available excavators and shovels, please contact your
Area/District Industrial Sales Representative or the
3500 Product Group.
2 31 December 2012 9:11 AM
3516 B
Industrial Engine
PERFORMANCE CURVES 1641 bkW/2200 bhp @ 1800 rpm
IND - C (Intermittent) - DM4642-03
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
1800 1641 8703 213 416.6
1700 1613 9060 206.7 397.5
1600 1566 9343 203.3 379.4
1500 1499 9540 202.8 362.2
1450 1454 9573 203.5 352.7
1400 1398 9537 204.8 341.3
1350 1337 9460 206.4 329.0
3 31 December 2012 9:11 AM
3516 B
Industrial Engine
PERFORMANCE CURVES 1641 bkW/2200 bhp @ 1800 rpm
IND - C (Intermittent) - DM4642-03
Engine English
Torque
lb•ft
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed rpm
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
1800 2200 6419 .350 110.1
1700 2163 6682 .340 105.0
1600 2099 6891 .334 100.2
1500 2010 7036 .333 95.7
1450 1949 7061 .335 93.2
1400 1875 7034 .337 90.2
1350 1793 6977 .339 86.9
4 31 December 2012 9:11 AM
3516 B
Industrial Engine
RATINGS AND CONDITIONS 1641 bkW/2200 bhp @ 1800 rpm
IND - C (Intermittent) Intermittent service where Engine Performance Engine performance is
maximum power and/or speed are cyclic. The corrected to inlet air standard conditions of 99 KPA
power and speed capability of the engine can be (29.31 IN HG) dry barometer and 25 deg C (77 deg F)
utilized for one uninterrupted hour followed by one temperature. These values correspond to the
hour of operation at or below IND - A. Time at full standard atmospheric pressure and temperature as
load is not to exceed 50% of the duty cycle. Typical shown in SAE J1995.
service examples are: agricultural tractors,
harvesters and combines, off highway trucks, fire Performance measured using a standard fuel with
pump application power, blast hole drills, rock fuel gravity of 35 degrees API having a lower
crushers and wood chippers with high torque rise, heating value of 42,780 KJ/KG (18,390 BTU/LB) when
and oil field hosting. used at 29 DEG (84.2 DEG F) where the density is
838.9 G/L (7.001 LB/US GAL).
The corrected performance values shown for
Caterpillar engines will approximate the values
obtained when the observed performance data is
corrected to SAE J1995, ISO 3046-2 and 8665 and
2288 and 9249 and 1585, EEC 80/1269 and DIN 70020
standard reference conditions.
Engine Dimensions
(1) Length 2982.6 mm (117.42 in) Note: Do not use for installation design.
See general dimension drawings for
(2) Width 1522.2 mm (59.93 in) detail (Drawing # 2002738 ).
(3) Height 1937.9 mm (76.3 in)
Performance Number: DM4642-03 © 2012 Caterpillar
Feature Code: 516DO02 Arr. Number: 1918416 All rights reserved.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
16285247 CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," the
"Power Edge" trade dress, as well as corporate and product identity
used herein, are trademarks of Caterpillar and may not be used
without permission.
