R

BP40
Battery Powered Guitar Amplifier
OWNER’S MANUAL

CHANGE LIFE WITH MUSIC

深圳市酷乐科技有限公司
SHENZHEN COOLMUSIC TECH CO.,LTD

www.coolmusic-tech.com.cn
www.coolmusic-tech.com
 Q&As WELCOME!
1. Can not turn on the amp
Battery was dead; Try to connect the adapter and chek if the adapter indicator light works
properly.
2. U disk can not record
Pls make sure the capacity of your U disk less than 32 GB;
Thank you for choosing to use BP40 battery powered guitar amplifier,
The format of your U disk is incorrect, pls choose the U disk of FAT32.
3. Can not connect Bluetooth After years of sound tests and explorations, our engineers and musicians
Pls check wether the bluetooth trun on; finally developed the characteristics and advantages BP40 . So we ensure
If the indicator light is always on after flashing, the bluetooth has been connected by other that the amp will send out most beautiful voice for a variety of keyboards,
device;
Try another phone to connect it.
acoustic guitar, microphone and other musical instruments.
4. Battery problem
If the batteries dead for a long time, the batteries will be damaged. Volume, bass and treble can be adjusted quickly and rechargeable
The amp can use for 5-10 hours after full charged. The batteries can be changed, but you
lithium-ion batteries are built into this amp, which give it 5-10 hour of
have to ask professional to do it.
5. No sound on the amp playing time. Maintained for 5-10 hour of working state after every charging.
Pls check the volume on, then pls the the adapter and the battery works normally. The handy USB port also allows you to charge your other devices when
6. Lound white noise you’re on the go.
Pls pull all of the equipment out, incluing all of the musical instruments and adapter, if the
issue can't be solve, pls contact the seller.

WARNING
Technical Parameters 1. When the speaker is not in use for a long time, charge it once every 6 months to prevent
the speaker from being in a dead state for a long time and damaging the battery.
Model BP-40 2. When the speaker is not used for a long time, charge it once every 6 months to fully
Rated power Rated : 40W charge it.
Woofer: 8.0 inches 3. Please choose a DC, 18V, 3A adapter to charge the speaker (the adapter came with is
The horn
Tweeter: 1.5 inches
DC 18V 3A)
Frequency range 20 - 20kHz
4. Do not use AC adapter to charge directly, please charge it using the adapter provided by
4*18650 lithium battery + battery protection plate
Lithium battery pack Voltage :14.8V Battery capacity :2600MA the manufacturer.
weight 6.0KG 5. DI OUT jack can be connected to another speaker
adapter 18V/3A 6. We offer 1-year warranty, according to the time the customer receives the speake. (There
is currently no specific place to register the warranty)

4 1
 Schematic diagram of interface Schematic diagram of interface
Channel 1/2 Channel 3 Channel 3
Channel 1 Channel 2 Reverb Gain Treble Master Vol
Channel 3 Channel 3
Battery Status: Blue light indicates battery is fully charged, and red light indicates low
Channel 1 Channel 2 battery, requires charging.Charging Indicator: When the purple light is flashing, is charging,
Gain Gain Channel 3 Bass Reverb
and when it's fully charged the lights stay steady purple.

LINE 1 LINE 2 LINE 1 & LINE 2 LINE 3

40
BP40
40
Phone In

CAUTION AVIS
Power indicator:
1.Non-charging state:Display blue when power is enough; display purple when power
is low;
2.charging state:Purple light blinks during charging, turns to purple light(stop blink)
after full-charged.
Bass: Low frequency signal control Treble:middle High frequency signal control
POWER D.I Phones 18V DC 9V DC
Reverb:Timbre modification Mode switching:Mp3/Bluetooth input output

Recording button ( this button is invalid when there is no U Disk inserted)

How to turn on Recording Function? POWER :power control,the associated power indicator
1. Insert the U disk, click to start recording (the indicator light flashes red), click again to end
the recording and play this recording (click again to start a new recording);
D.I out:listen port
2. When playing a recording: double-click the recording button to delete the currently playing Phones :headset output
recording file, and long-press the recording button to switch between sequential play/single
18V DC input:Connect the output of adapter
cycle (the indicator light is always on in purple during single cycle).
Indicator light:
9V DC output:The 9 v voltage supply to other equipment
1.Bluetooth waiting for connection:Indicator Light blue flashing;
2.Insert U disk / Bluetooth Connect to the mobile phone:Indicator
light is normally on blue;
3.Single cycle:Indicator light is normally on purple. Built-in MP3, Bluetooth and Record
USB input:The jack can read storage devices such as USB
flash drive(Insert U disk automatically switch to MP3 mode)
Mode button : Light weight and small size
1.single press:Pause / play
2.Long press:Bluetooth Open / close(No insert U disk)
3.Long press:switch Bluetooth / MP3 (insert U disk)

single press:Next song

Amazing sound and great look
Phone In Long press:volume increase
Aux IN:Mobile single press:Previous song
phones or MP3 input Long press: volume discrease
Pretty versatile and capable
How to turn on Bluetooth Function and connect with your devices?
1. Turn on the amplifier.
2. Long press the MODE button and turn on Bluetooth MODE.
3. Turn on the Bluetooth function of your device and choose the device with the name of coolmusic
(Support recording software such as Douyin, Kugou, Kuaishou, National K Song, Sing Bar, etc.)

2 3