Technical Information

Orbital Motors
with Speed Sensor

www.danfoss.com
Technical Information
Orbital Motors with Speed Sensor

Revision history Table of revisions

Date Changed Rev

June 2021 Changed document number from '520L0830' to 'BC152886483462' and removed obsolete 0401
motors

June 2015 Removed some code numbers 0201

November 2014 Converted to Danfoss layout - DITA CMS CA

November 2012 First edition BF

2 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Contents

A wide range of Orbital Motors

A Wide Range of Hydraulic Motors............................................................................................................................................ 4
Survey of Literature with Technical Data on Danfoss Hydraulic Motors......................................................................4
Data survey
Introduction........................................................................................................................................................................................5
Principle............................................................................................................................................................................................... 5
Advantages.........................................................................................................................................................................................5
Typical Applications........................................................................................................................................................................ 5
Versions OMT EM and OMV EM
Versions................................................................................................................................................................................................6
Features available:...................................................................................................................................................................... 6
Code Numbers OMT EM and OMV EM
Code number..................................................................................................................................................................................... 7
Ordering......................................................................................................................................................................................... 7
Technical Data OMT EM
Technical data for OMT EM........................................................................................................................................................... 8
Max. Permissible Shaft Seal Pressure.........................................................................................................................................9
OMT EM with check valves and without use of drain connection:........................................................................... 9
OMT EM with check valves and with drain connection:............................................................................................... 9
Pressure drop in motor...................................................................................................................................................................9
Technical Data OMV EM
Technical data for OMV EM........................................................................................................................................................ 11
Max. Permissible Shaft Seal Pressure...................................................................................................................................... 11
OMV EM with check valves and without use of drain connection:.........................................................................11
OMV EM with check valves and with drain connection:.............................................................................................12
Pressure drop in motor................................................................................................................................................................ 12
Technical Data Speed Sensor
Technical Data Speed Sensor.................................................................................................................................................... 13
Mechanical data:....................................................................................................................................................................... 13
Electrical data.............................................................................................................................................................................13
Wiring Diagram...............................................................................................................................................................................14
Speed Sensor with Plug Connection Dimensions..............................................................................................................14
Speed Sensor with Molded in Cable Dimensions.............................................................................................................. 15
Spare Parts........................................................................................................................................................................................15
Speed sensor.............................................................................................................................................................................. 15
Accessories....................................................................................................................................................................................... 15
Cable with plug......................................................................................................................................................................... 15
Wire (shield)................................................................................................................................................................................ 16
Plug................................................................................................................................................................................................16
Shaft Versions
Shaft Versions..................................................................................................................................................................................17
Port Thread Versions
Port Thread Versions.....................................................................................................................................................................18
Dimensions - US Version
OMT EM............................................................................................................................................................................................. 19
Dimensions - European Version
OMT EM............................................................................................................................................................................................. 21
OMV EM............................................................................................................................................................................................. 22
Weight of Motors
Weight of Motors OMT and OMV............................................................................................................................................. 24

© Danfoss | June 2021 BC152886483462en-000401 | 3

Technical Information
Orbital Motors with Speed Sensor

A wide range of Orbital Motors

A Wide Range of Hydraulic Motors

Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can offer
more than 3000 different hydraulic motors, categorised in types, variants and sizes (incl. different shaft
versions).
The motors vary in size (rated displacement) from 25 cm3 [1.5 in3] to 800 cm3 [48.9 in3] per revolution.
Speeds range up to approx. 1700 min-1 (rpm) for the smallest type and up to approx
600 min-1 (rpm) for the largest type.
Maximum operating torques vary from 13 Nm [115 lbf·in] to 2700 Nm [24.000 lbf·in] (peak) and maximum
outputs are from 12 kW [16.1 hp] to 70 kW [95 hp].
Characteristic features:
• Smooth running over the entire speed range
• Constant operating torque over a wide speed range
• High starting torque
• High return pressure without the use of drain line (High pressure shaft seal)
• High efficiency
• Long life under extreme operating conditions
• Robust and compact design
• High radial and axial bearing capacity
• For applications in both open and closed loop hydraulic systems
• Suitable for a wide variety of hydraulics fluids

The programme is characterised by technical features appealing to a large number of applications and a
part of the programme is characterised by motors that can be adapted to a given application. Adaptions
comprise the following variants among others:
• Motors with corrosion resistant parts
• Wheel motors with recessed mounting flange
• Short motors without bearings
• Ultra short motors
• Motors with integrated positive holding brake
• Motors with integrated negative holding brake
• Motors with integrated flushing valve
• Motors with speed sensor
• Motors with tacho connection
• All motors are available with black finish paint

Survey of Literature with Technical Data on Danfoss Hydraulic Motors

Detailed data on all Danfoss motors can be found in our motor catalogue, which is divided into 5
individual subcatalogues:
• General information on Danfoss hydraulic motors: function, use, selection of hydraulic motor,
hydraulic systems, etc.
• Technical data on large motors: OMT and OMV
• Technical data on large motors: TMK
• Technical data on large motors: TMT
• Technical data on large motors: TMVW

4 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Data survey

Introduction
Danfoss has developed a speed sensor specially designed for LSHT motors.
The electric output signal is a standard voltage signal that can be used for regulating the speed motor.

Principle
The speed is measured by a sensor in accordance with the Hall principle. Signal processing and
amplification are performed in the sensor housing. A connection is provided in the housing for a Binder
Series 713 plug or a plug with 5 metres of cable (available from Danfoss). The sensor can also be supplied
with 2 metres molded in cable.

Advantages
• Robust design
• CE-marked
• Fulfils EMC requirements of EN50081 and EN50082
• Large frequency range, precise regulation
• No limit on motor performance when compared to corresponding motors without speed sensor
• IEC 529 degree of protection: IP 67
• Replacable transducer
• Standard speed signal
• Easy installation
• Electronic signal processing and amplification integrated in the sensor’s housing and requiring no
maintenance.

Typical Applications
• Speed indication
• Setting tightening speed in machine tools
• Extend/retract positioning of work platforms
• Granulate metering on injection moulding machines
• Conveyor speed regulation
• Metering on salt spreaders

© Danfoss | June 2021 BC152886483462en-000401 | 5

Technical Information
Orbital Motors with Speed Sensor

Versions OMT EM and OMV EM

Versions

Mounting Spigot Bolt circle Shaft Port size European US Side Stan Drai Chec Main type
flange diameter diameter version - version - port dard n k designation
(BC) delivered delivered vers shaf conn valve
with sensor with ion t ectio
for plug sensor seal n
connector with 2 m
(PNP moduled
version) in cable
(PNP
version)
OMT EM Motors
Standard Ø125 mm Ø160 mm Cyl. 40 mm G 3/4 X X X Yes Yes OMT EM
flange
Ø5 in Ø6.38 Cyl. 1.5 in 11/16 - 12 X X Yes Yes OMT EM
UN
OMV EM Motors
Standard Ø160 mm Ø200 mm Cyl. 50 mm G1 X X X Yes Yes OMV EM
flange

Features available:
Motors in european version: Speed sensor with 2 metres of molded in cable.
Motors in US versions: Speed sensor for plug connection.
Speed sensor for plug connector in NPN version.

The standard speed sensor is a PNP version

6 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Code Numbers OMT EM and OMV EM

Code number

Code Displacements
numbers
80 100 125 160 200 250 315 400 500 630 800
OMT EM Motors
151B - - - 3260 3261 3262 3263 3264 3265 - -
151B - - - 3700 3701 3702 3703 3704 3705 - -
OMV EM Motors
151B - - - - - - 3266 3267 3268 3269 3270

Ordering
Add the four digit prefix “151-” to the four digit numbers from the chart for complete code number.

Orders will not be accepted without the four digit prefix.

© Danfoss | June 2021 BC152886483462en-000401 | 7

Technical Information
Orbital Motors with Speed Sensor

Technical Data OMT EM

Technical data for OMT EM

Type OMT EM OMT EM OMT EM OMT EM OMT EM OMT EM

Motor size 160 200 250 315 400 500
Geometric displacements cm3 161.1 201.4 251.8 326.3 410.9 523.6
[in3] [9.83] [12.29] [15.37] [19.91] [25.07] [31.95]
Max. speed min-1 cont. 625 625 500 380 305 240
rpm
int. 780 750 600 460 365 285
Max torque Nm cont. 470 590 730 950 1080 1220
[lbf•in] [4160] [5220] [6460] [8410] [9560] [10800]
int. 560 710 880 1140 1260 1370
[4960] [6280] [7790] [10090] [11150] [12130]
Max. output kW cont. 26.5 33.5 33.5 33.5 30.0 26.5
[hp] [35.5] [44.9] [44.9] [44.9] [40.2] [35.5]
int.1) 32.0 40.0 40.0 40.0 35.0 30.0
[42.9] [53.6] [53.6] [53.6] [46.9] [40.2
Max. pressure drop bar cont. 200 200 200 200 180 160
[psi] [2900] [2900] [2900] [2900] [2610] [2320]
int.1) 240 240 240 240 210 180
[3480] [3480] [3480] [3480] [3050] [2610]
peak2) 280 280 280 280 240 210
[4060] [4060] [4060] [4060] [3480] [3050]
Max. oil flow l/min cont. 100 125 125 125 125 125
[US gal/min] [26.4] [33.0] [33.0] [33.0] [33.0] [33.0]
int.1) 125 150 150 150 150 150
[33.0] [39.6] [39.6] [39.6] [39.6] [39.6]
Max. starting pressure bar 10 10 10 10 10 10
with unloaded shaft [psi] [145] [145] [145] [145] [145] [145]
Min starting torque Nm at max. press. 340 430 530 740 840 950
[lbf•in] drop cont. [3010] [3810] [4690] [6550] [7430] [8410]
at max. press. 410 520 630 890 970 1060
drop int.1) [3630] [4600] [5580] 7880] [8590] [9380]
Frequency [Hz] max. 1014 975 780 598 475 371
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for max. 1% of every minute.

Type Max. inlet pressure Max. return pressure with

drain line
OMT EM bar [psi] 210 140
cont. [3050] [2030]
bar [psi] 250 175
int.1) [3630] [2540]
bar [psi] 300 210
peak 2) [4350] [3050]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for max. 1% of every minute.

For further technical specifications please see technical information for OMT and OMV (BC152886483862)

8 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Technical Data OMT EM

Max. Permissible Shaft Seal Pressure

OMT EM with check valves and without use of drain connection:

The pressure on the shaft seal never exceeds the pressure in the return line.

151-320.10

OMT EM with check valves and with drain connection:

The shaft seal pressure equals the pressure on the drain line
Max. return pressure without drain line or max. pressure in drain line

P P
psi bar
1500
100
90
1200
80
70
900
60
50
600 40
30
300 20
10
0 0
0 100 200 300 400 500 600 700 800 max. min-1
(rpm)

151-1674.10

--- Intermittent operation: the permissible values may occur for max. 10% of every minute.
___ Continuous operation

Pressure drop in motor

′p ′p
psi bar
16

200 14

12
150 10

8
100
6

4
50
2

0 0 Q
0 20 40 60 80 100 120 140 l/min

Q
0 4 8 12 16 20 24 28 32 36 US gal/min

151-1409.10

© Danfoss | June 2021 BC152886483462en-000401 | 9

Technical Information
Orbital Motors with Speed Sensor

Technical Data OMT EM

The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]

10 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Technical Data OMV EM

Technical data for OMV EM

Type OMV EM OMV EM OMV EM OMV EM OMV EM

Motorsize 315 400 500 630 800
Geometric displacements cm3 314.5 400.9 499.6 629.1 801.8
[in3] [19.19] [24.46] [30.49] [38.39] [48.93]
Max. speed min-1 cont. 510 500 400 315 250
rpm
int. 630 600 480 380 300
Max torque Nm cont. 920 1180 1460 1660 1880
[lbf•in] [8140] [10440] [12920] [14690] [16640]
int. 1110 1410 1760 1940 2110
[9820] [12480] [15580] [17170] [18680]
Max. output kW cont. 42.5 53.5 53.5 48.0 42.5]
[hp] [57.0] [71.7] [71.7] [64.4] [57.0]
int.1) 51.0 64.0 64.0 56.0 48.0
[68.4] 85.8] [85.8] [75.1] [64.4]
Max. pressure drop bar cont. 200 200 200 180 160
[psi] [2900] [2900] [2900] [2610] [2320]
int.1) 240 240 240 210 180
[3480] [3480] [3480] [3050] [2610]
peak2) 280 280 280 240 210
[4060] [4060] [4060] [3480] [3050]
Max. oil flow l/min cont. 160 200 200 200 200
[US gal/min] [42.3] [52.8] [52.8] [52.8] [52.8]
int.1) 200 240 240 240 240
[52.8] [63.4] [63.4] [63.4] [63.4]
Max. starting pressure bar 8 8 8 8 8
with unloaded shaft [psi] [116] [116] [116] [116] [116]
Min starting torque Nm at max. press drop 710 910 1130 1330 1510
[lbf•in] cont. [6280] [8050] [10000] [11770] [13360]
at max. press.drop 850 1090 1360 1550 1700
int.1) [7520] [9650] [12040] [13720] [15050]
Frequency [Hz] max. 1071 1020 816 646 510
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for max. 1% of every minute.

Type Max. inlet pressure Max. return pressure with drain line
OMV EM bar [psi] 210 140
cont. [3050] [2030]
bar [psi] 250 175
int.1) [3630] [2540]
bar [psi] 300 210
peak2) [4350] [3050]
1) Intermittent operation: the permissible values may occur for max. 10% of every minute.

2) Peak load: the permissible values may occur for max. 1% of every minute.

For further technical specifications please see technical information for OMT and OMV (BC152886483862)

Max. Permissible Shaft Seal Pressure

OMV EM with check valves and without use of drain connection:

The pressure on the shaft seal never exceeds the pressure in the return line.

© Danfoss | June 2021 BC152886483462en-000401 | 11

Technical Information
Orbital Motors with Speed Sensor

Technical Data OMV EM

151-320.10

OMV EM with check valves and with drain connection:

The shaft seal pressure equals the pressure on the drain line
Max. return pressure without drain line or max. pressure in drain line
P P
psi bar
1500
100
90
1200
80
70
900
60
50
600 40
30
300 20
10
0 0
0 100 200 300 400 500 600 max. min-1
(rpm)

151-1673.10

--- Intermittent operation: the permissible values may occur for max. 10% of every minute.
___ Continuous operation

Pressure drop in motor

′p ′p
psi bar
16

200 14

12
150 10

8
100
6

4
50
2

0 0 Q
0 20 40 60 80 100 120 140 160 180 200 l/min

Q
0 5 10 15 20 25 30 35 40 45 50 US gal/min

151-1410.10

The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS]

12 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Technical Data Speed Sensor

Technical Data Speed Sensor

Mechanical data:
Temperatur range: -30°C to +90°C
Enclosure acc. to IEC 529: IP 67

Electrical data
Principle: Hall
Supply voltage: 11 - 30V
Load max.: Lhigh = Llow ± 50 mA
No load current, max.: 20 mA
Output signal:

Connection type
Binder Series 713 Molded in cable Connection
Terminal no.: 1 brown UDC (+supply)
2 White No connection
3 Blue UDC (-supply)
4 Black Output signal
Protection: Protected against short circuit and incorrect polarization.

Revolution:
Pulses per revolution (PPR) OMT EM OMV EM
84 102

© Danfoss | June 2021 BC152886483462en-000401 | 13

Technical Information
Orbital Motors with Speed Sensor

Technical Data Speed Sensor

Calculation of frequency:

Wiring Diagram

Speed Sensor with Plug Connection Dimensions

14 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Technical Data Speed Sensor

Speed Sensor with Molded in Cable Dimensions

Spare Parts

Speed sensor

Code numbers
Type Code no.
Sensor with plug (PNP output) 151-5662
Sensor with 2 m [6.56 ft] molded in cable (PNP output) 151-5663
Sensor with 5.5 m [18.04 ft] moulded in cable (PNP output) 151-5667
Sensor with plug (NPN output) 151-5833
Accessories

Cable with plug

Code numbers
Cable length 5 m [16.4 ft] 984F0101

© Danfoss | June 2021 BC152886483462en-000401 | 15

Technical Information
Orbital Motors with Speed Sensor

Technical Data Speed Sensor

Wire (shield)
Core: Cu, 4 • 0.34 mm2
Sheath: PUR/PVC, colour: grey

Plug
Type: Binder, Series 713
Cable no: 1 brown
2 white
3 blue
4 black

Temperature range: -30 °C to +80 °C

Enclosure acc. to IEC 529: IP 67

16 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Shaft Versions

Shaft Versions

OMT OMT US Version OMV

A: Cylindrical shaft; 40 mm B: Cylindrical 1.5 in shaft A: Cylindrical shaft; 50 mm
C: Parallel key D: Parallel key C: Parallel key
A12 •8 • 70; DIN 6885 3/8 × 3/8 × 21/4 in; B.S.46 A14 • 9 • 70; DIN 6885

© Danfoss | June 2021 BC152886483462en-000401 | 17

Technical Information
Orbital Motors with Speed Sensor

Port Thread Versions

Port Thread Versions

B
A Ø41.5 [1.634]
Ø41.0 [1.614]
E F
min. 18 [0.67]

min. 19 [0.75]
C D

G H

min. 13 [0.51]
min. 12 [0.47]

151-1977.11

OMT
A: G main ports B: UN main ports
E: ISO 228/1 - G3/4 F: 1 1/16 - 12 UN, O-ring boss port
C: G drain port D: UNF drain port
G: ISO 228/1 - G1/4 H: 9/16 - 20 UNF, O-ring boss port

OMV
A: G Main port B : G drain port
E: ISO 228/1 - G1 G: ISO 228/1 - G1/4

18 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Dimensions - US Version

OMT EM

C: Drain connection 9⁄16 - 18 UNF; 13 mm [0.51 in] deep O-ring boss port
D: 1 1⁄16 - 12 UN; 19 mm [0.75 in] deep O-ring boss port
F : Plug connection: 2 m [6.56 ft] molded in cable

Type Lmax L1 L2
mm [in] mm [in] mm [in]
OMT 160 EM 190 16.5 140
[7.48] [0.650] [5.51]
OMT 200 EM 195 21.5 145
[7.68] [0.846] [5.71]

© Danfoss | June 2021 BC152886483462en-000401 | 19

Technical Information
Orbital Motors with Speed Sensor

Dimensions - US Version

Type Lmax L1 L2
mm [in] mm [in] mm [in]
OMT 250 EM 201 27.8 151
[7.91] [1.094] [5.94]
OMT 315 EM 211 37.0 161
[8.31] [1.457] [6.34]
OMT 400 EM 221 47.5 171
[8.70] [1.870] [6.73]
OMT 500 EM 235 61.5 185
[9.25] [2.421] [7.28]

*) The gearwheel set is 3.5 mm [0.138 in] wider across the rollers than the L1 dimensions

20 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Dimensions - European Version

OMT EM

C: Drain connection G 1⁄4 ; 12 mm [0.47 in] deep

D: M10 ; 10 mm [0.39 in] deep
E: G 3⁄4 ; 17 mm [0.67 in] deep
F : Plug connection: Binder Series 713

Type Lmax L1 L2
mm [in] mm [in] mm [in]
OMT 160 EM 190 [7.48] 16.5 [0.650] 140 [5.51]
OMT 200 EM 195 [7.68] 21.5 [0.846] 145 [5.71]

© Danfoss | June 2021 BC152886483462en-000401 | 21

Technical Information
Orbital Motors with Speed Sensor

Dimensions - European Version

Type Lmax L1 L2
mm [in] mm [in] mm [in]
OMT 250 EM 201 [7.91] 27.8 [1.094] 151 [5.94]
OMT 315 EM 211 [8.31] 37.0 [1.457] 161 [6.34]
OMT 400 EM 221 [8.70] 47.5 [1.870] 171 [6.73]
OMT 500 EM 235 [9.25] 61.5 [2.421] 185 [7.28]

*) The gearwheel set is 3.5 mm [0.138 in] wider across the rollers than the L1 dimensions

OMV EM

C: Drain connection G 1⁄4 ; 12 mm [0.47 in] deep

22 | © Danfoss | June 2021 BC152886483462en-000401

Technical Information
Orbital Motors with Speed Sensor

Dimensions - European Version

D: M12; 12 mm [0.47 in] deep

E: G 1; 18 mm [0.71 in] deep
F : Plug connection: Binder Series 713

Type Lmax L1 L2
mm [in] mm [in] mm [in]
OMV 315 EM 215 [8.46] 22.0 [0.87] 160 [6.30]
OMV 400 EM 222 [8.74] 29.0[1.14] 167 [6.57]
OMV 500 EM 230 [9.05] 37.0 [1.46] 175 [6.89]
OMV 630 EM 240 [9.45] 47.5 [1.87] 186 [7.32]
OMV 800 EM 254 [10.00] 61.5 [2.42] 200 [7.87]

*) The gearwheel set is 3.5 mm [0.138 in] wider across the rollers than the L1 dimensions

© Danfoss | June 2021 BC152886483462en-000401 | 23

Technical Information
Orbital Motors with Speed Sensor

Weight of Motors

Weight of Motors OMT and OMV

Code no. Weight

kg [lb]
151B3260 20.1 [44.31]
151B3262 21.1 [44.31]
151B3263 22.1 [40.72]
151B3264 23.1 [50.93]
151B3265 24.1 [53.13]
151B3266 31.9 [70.33]
151B3260 32.7 [72.09]
151B3261 20.6 [45.42]
151B3268 33.6 [74.07]
151B3269 35.0 [77.16]
151B3270 36.6 [80.69]
151B3700 20.2 [44.53]
151B3701 20.7 [45.64]
151B3702 21.2 [46.74]
151B3703 22.2 [48.94]
151B3704 23.2 [51.15]
151B3705 24.2 [53.35]

24 | © Danfoss | June 2021 BC152886483462en-000401

Products we offer: Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and
electric components. We specialize in providing state-of-the-art technology and solutions
• Cartridge valves
that excel in the harsh operating conditions of the mobile off-highway market as well as the
• DCV directional control marine sector. Building on our extensive applications expertise, we work closely with you to
valves ensure exceptional performance for a broad range of applications. We help you and other
• Electric converters customers around the world speed up system development, reduce costs and bring vehicles
• Electric machines and vessels to market faster.
• Electric motors Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile
• Gear motors electrification.

• Gear pumps Go to www.danfoss.com for further product information.

• Hydraulic integrated We offer you expert worldwide support for ensuring the best possible solutions for
circuits (HICs) outstanding performance. And with an extensive network of Global Service Partners, we also
• Hydrostatic motors provide you with comprehensive global service for all of our components.
• Hydrostatic pumps
• Orbital motors
• PLUS+1® controllers
• PLUS+1® displays
• PLUS+1® joysticks and
pedals
• PLUS+1® operator
interfaces
• PLUS+1® sensors
• PLUS+1® software
• PLUS+1® software services,
support and training
• Position controls and
sensors
• PVG proportional valves
• Steering components and
systems
• Telematics Local address:

Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com

Danfoss
Power Solutions Trading
Danfoss Danfoss Danfoss (Shanghai) Co., Ltd.
Power Solutions (US) Company Power Solutions GmbH & Co. OHG Power Solutions ApS Building #22, No. 1000 Jin Hai Rd
2800 East 13th Street Krokamp 35 Nordborgvej 81 Jin Qiao, Pudong New District
Ames, IA 50010, USA D-24539 Neumünster, Germany DK-6430 Nordborg, Denmark Shanghai, China 201206
Phone: +1 515 239 6000 Phone: +49 4321 871 0 Phone: +45 7488 2222 Phone: +86 21 2080 6201

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

© Danfoss | June 2021 BC152886483462en-000401